Unix in a Nutshell, 4th Edition

Arnold Robbins

Editor

Mike Loukides

Copyright © 2009 O'Reilly Media, Inc.

O'Reilly Media

Dedication

To my wife, Miriam. May our dreams continue to come true.

To my children, Chana, Rivka, Nachum, and Malka.

To the memory of Frank Willison.

Preface

The fourth edition of Unix in a Nutshell brings the book into the 21st century. The term "UNIX" is a registered trademark of The Open Group. It is used for branding systems as compliant with the various standards that collectively define the behavior of a modern Unix system. More informally though, many systems in use today are Unix work-alikes, even though their source code base was developed independently from the original Unix systems.

Thus, the goal of this edition to present the broader state of Unix in today's world. In particular, it's important to cover both the commercial variants, and those where source code for the system and the utilities are freely available. To this end, we have chosen to cover these systems, which are representative of "Unix" today:

Solaris 10

Solaris is the most popular commercial system based on the original Unix System V code base.

GNU/Linux

GNU/Linux systems have gained a huge foothold in the commercial marketplace. While currently used most heavily for back-end servers, GNU/Linux is also starting to gain ground in the desktop market.

Mac OS X

Apple's rewrite of their operating system has a core based on Mach and various BSD technologies. The command set is derived from FreeBSD. Thus, besides having an exciting user interface, Mac OS X is representative of the BSD strain of free Unix-like systems.

The commands covered by the current POSIX standard form the core of our presentation. Each specific system has commands that are unique to it; these are covered too. Finally, many important and useful utilities are distributed as Free or Open Source software on the Internet. We have done our best to cover those as well, including presenting the Internet URL from which you can download the source code, in case your particular system doesn't include that utility in its distribution.

This edition has the following new features:

Covers Solaris 10, the latest version of the SVR4-based operating system from Sun Microsystems,[*] GNU/Linux, and Mac OS X.

Chapter 2, Unix Commands, has been heavily reorganized and revised, in order to cover the three systems.

Chapter 3, The Unix Shell: An Overview, has been reworked, now covering Bash,[*]ksh93, and tcsh.

Chapter 4, The Bash and Korn Shells, now covers the popular Bash shell, along with the 1988 and 1993 versions of ksh. Coverage of the vanilla Bourne shell has been dropped.

Chapter 5, tcsh: An Extended C Shell, now covers the widely-used tcsh shell instead of the original Berkeley csh.

Chapter 6, Package Management, is new. It covers package management programs, which are used for program installation on popular GNU/Linux systems. It also describes similar facilities for Solaris and Mac OS X.

Chapter 8, The Emacs Editor, now covers GNU Emacs Version 21.

Chapter 9, The vi, ex, and vim Editors, now contains merged coverage of the vi and ex text editors. Important commands and features from the popular vim editor are also included.

Chapter 10, The sed Editor, now includes coverage of GNU sed.

The coverage of awk in Chapter 11, The awk Programming Language, has been updated as well, dropping separate coverage of the original, "old" awk.

Chapter 12, Source Code Management: An Overview, which provides an introduction to source code management systems, has been added.

Chapter 14, The Concurrent Versions System, on CVS, has been added.

Chapter 15, The Subversion Version Control System, on the Subversion version control system, is brand new.

Chapter 16, The GNU make Utility, has been revised to focus on GNU Make.

Chapter 17, The GDB Debugger, on the GDB debugger, is brand new.

As time marches on, once-popular or necessary commands fall into disuse. Thus, with the exception of Chapter 18, which describes how to write a manual page, all the material on the venerable troff text formatting suite has been removed from the book. We have also removed the previous edition's material on SCCS and on obsolete commands.

Audience

This book should be of interest to Unix users and Unix programmers, as well as to anyone (such as a system administrator) who might offer direct support to users and programmers. The presentation is geared mainly toward people who are already familiar with the Unix system; that is, you know what you want to do, and you even have some idea how to do it. You just need a reminder about the details. For example, if you want to remove the third field from a database, you might think, "I know I can use the cut command, but what are the options?" In many cases, specific examples are provided to show how a command is used.

We have purposely chosen to omit system administration commands. System administration is a complicated topic in its own right, and the Bibliography lists several good books on this important subject.

This reference might also help people who are familiar with some aspects of Unix but not with others. Many chapters include an overview of the particular topic. While this isn't meant to be comprehensive, it's usually sufficient to get you started in unfamiliar territory.

Finally, if you're new to the Unix operating system, and you're feeling bold, you might appreciate this book as a quick tour of what Unix has to offer. The "Beginner's Guide" section in Chapter 1 can point you to the most useful commands, and you'll find brief examples of how to use them, but take note: this book should not be used in place of a good beginner's tutorial on Unix. (You might try Learning the Unix Operating System for that.) This reference should be a supplement, not a substitute. (There are references throughout the text to other relevant O'Reilly books that will help you learn the subject matter under discussion; you may be better off detouring to those books first. Also, see the Bibliography.)

[*] The version used for this book was for Intel x86-based systems.

[*] Because the Free Software Foundation treats "Bash" and "Emacs" as proper nouns, we do too, here and throughout the book.

Scope of This Book

Unix in a Nutshell, Fourth Edition, is divided into four parts:

Part I (Chapters 1 through 6) describes the syntax and options for Unix commands and for the Bash, Korn, and tcsh shells. Part I also covers package management.

Part II (Chapters 7 through 11) presents various editing tools and describes their command sets (alphabetically and by group). Part II begins with a review of pattern matching, including examples geared toward specific editors.

Part III (Chapters 12 through 18) summarizes the Unix utilities for software development—RCS, CVS, Subversion, make and GDB. It also covers, in brief, what you need to know to write a manual page for your programs.

Part IV contains a table of ISO Latin-1 characters and equivalent values (ISO 8859-1 (Latin-1) Character Set) and a Bibliography of Unix books.

Conventions

This book follows certain typographic conventions, outlined below:

Constant width

is used for directory names, filenames, commands, program names, functions, and options. All terms shown in constant width are typed literally. It is also used to show the contents of files or the output from commands.

Constant width italic

is used in syntax and command summaries to show generic text; these should be replaced with user-supplied values.

Constant width bold

is used in examples to show text that should be typed literally by the user.

Italic

is used to show generic arguments and options; these should be replaced with user-supplied values. Italic is also used to indicate URLs, macro package names, library names, comments in examples, and the first mention of terms.

%, $, #

are used in some examples as the C shell prompt (%) and as the Bash, Bourne or Korn shell prompts ($). # is the prompt for the root user.

?, >

are used in some examples as the C shell secondary prompt (?) and as the Bash, Bourne or Korn shell secondary prompts (>).

□, →

are used in some examples to represent the space and tab characters respectively. This is particularly necessary for the examples in the chapters on text editing.

program (N )

indicates the "manpage" for program in section N of the online manual. For example, echo (1) means the entry for the echo command.

[ ]

surround optional elements in a description of syntax. (The brackets themselves should never be typed.) Note that many commands show the argument [ files ]. If a filename is omitted, standard input (usually the keyboard) is assumed. End keyboard input with an end-of-file character.

EOF

indicates the end-of-file character (normally CTRL-D).

^x, CTRL-x

indicates a "control character," typed by holding down the Control key and the x key for any key x.

|

is used in syntax descriptions to separate items for which only one alternative may be chosen at a time.

A final word about syntax. In many cases, the space between an option and its argument can be omitted. In other cases, the spacing (or lack of spacing) must be followed strictly. For example, -w n (no intervening space) might be interpreted differently from -w n. It's important to notice the spacing used in option syntax.

Tip

This icon signifies a tip, suggestion, or general note.

Warning

This icon indicates a warning or caution.

Using Code Examples

This book is here to help you get your job done. In general, you may use the code in this book in your programs and documentation. You do not need to contact us for permission unless you're reproducing a significant portion of the code. For example, writing a program that uses several chunks of code from this book does not require permission. Selling or distributing a CD-ROM of examples from O'Reilly books does require permission. Answering a question by citing this book and quoting example code does not require permission. Incorporating a significant amount of example code from this book into your product's documentation does require permission.

We appreciate, but do not require, attribution. An attribution usually includes the title, author, publisher, and ISBN. For example: "Unix in a Nutshell, Fourth Edition, by Arnold Robbins. Copyright 2005 O'Reilly Media, Inc., 0-596-10029-9."

If you feel your use of code examples falls outside fair use or the permission given above, feel free to contact us at permissions@oreilly.com.

Safari® Enabled

When you see a Safari® enabled icon on the cover of your favorite technology book, that means the book is available online through the O'Reilly Network Safari Bookshelf.

Safari offers a solution that's better than e-books. It's a virtual library that lets you easily search thousands of top tech books, cut and paste code samples, download chapters, and find quick answers when you need the most accurate, current information. Try it free at http://safari.oreilly.com.

How to Contact Us

We have tested and verified all of the information in this book to the best of our ability, but you may find that features have changed (or even that we have made mistakes!). Please let us know about any errors you find, as well as your suggestions for future editions, by writing:

O'Reilly Media, Inc.

1005 Gravenstein Highway North

Sebastopol, CA 95472

(800) 998-9938 (in the United States or Canada)

(707) 829-0515 (international/local)

(707) 829-0104 (fax)

You can also send us messages electronically. To be put on the mailing list or request a catalog, send email to:

info@oreilly.com

To ask technical questions or comment on the book, send email to:

bookquestions@oreilly.com

We have a web site for the book, where we'll list examples, errata, and any plans for future editions. You can access this page at:

http://www.oreilly.com/catalog/unixnut4/

Acknowledgments

Thanks again to Yosef Gold for sharing his office with me. Deb Cameron again revised Chapter 8. Thanks to Mike Loukides at O'Reilly Media for his work as editor. Chuck Toporek, also of O'Reilly Media, answered numerous Mac OS X and Macintosh-related questions, for which I'm grateful. J.D. "Illiad" Frazer of User Friendly (see http://www.userfriendly.org/) provided the great cartoon on the back cover. It's a relief to finally know the tarsier's name.

Thanks to Jennifer Vesperman for permission to adapt material from Essential CVS for Chapter 14. Similarly, Ben Collins-Sussman, Brian W. Fitzpatrick, and C. Michael Pilato gave permission for me to adapt material from Version Control with Subversion for Chapter 15, which I greatly appreciate. And thanks to Andy Oram, Ellen Siever, Stephen Figgins and Aaron Weber for making available material from Linux in a Nutshell for use in parts of the book.

Thanks to David G. Korn (AT&T Research) and Chet Ramey (Case Western Reserve University) for answering my questions about the Korn shell and Bash. Keith Bostic of Sleepycat Software answered several questions about Berkeley DB. Glenn Barry of Sun Microsystems helped out on the Solaris side.

Thanks to the following people, in alphabetical order, for reviewing the book during its various stages: Nelson H.F. Beebe (University of Utah Mathematics Department), Jon Forrest (University of California, Berkeley, Civil and Environmental Engineering), and Brian Kernighan (Princeton University Computer Science Department). Chet Ramey, co-author and maintainer of Bash, reviewed Chapter 4, and Bram Moolenaar, the author of vim, reviewed Chapter 9, for which I thank them.

A special thanks to Dr. Uri Degen, Lev Orpaz, Julio Kadichevski, and Sid Gordon of Ness Technologies, and to Mike Hendrickson and Mike Loukides of O'Reilly Media, for enabling me to finish this edition in a timely fashion.

Once again, thanks to my wife Miriam for her love, patience, and support, and to my children for not giving Mommy (too much) hassle while I was working.

Nof Ayalon

ISRAEL

--Arnold Robbins

Part I. Commands and Shells

Part I presents a summary of Unix commands of interest to users and programmers. It also describes the major Unix shells, including special syntax and built-in commands. It rounds off with an overview of package management software.

Chapter 1, Introduction

Chapter 2, Unix Commands

Chapter 3, The Unix Shell: An Overview

Chapter 4, The Bash and Korn Shells

Chapter 5, tcsh: An Extended C Shell

Chapter 6, Package Management

Chapter 1. Introduction

The Unix operating system originated at AT&T Bell Labs in the early 1970s. System V Release 4 (SVR4) came from USL (Unix System Laboratories) in the late 1980s. Unix source ownership is currently a matter of litigation in U.S. courts. Because Unix was able to run on different hardware from different vendors, developers were encouraged to modify Unix and distribute it as their own value-added version. Separate Unix traditions evolved as a result: USL's System V, the Berkeley Software Distribution (BSD, from the University of California, Berkeley), Xenix, etc.

SVR4, which was developed jointly by USL (then a division of AT&T) and Sun Microsystems, merged features from BSD and SVR3. This added about two dozen BSD commands (plus some new SVR4 commands) to the basic Unix command set. In addition, SVR4 provided a BSD Compatibility Package, a kind of "second string" command group. This package included some of the most fundamental BSD commands, and its purpose was to help users of BSD-derived systems make the transition to SVR4.

Unix in the 21st Century

Today, the specification of what makes a system "Unix" is embodied primarily in the POSIX standard, an international standard based on System V and BSD. Commercial Unix systems, such as Solaris from Sun Microsystems, AIX from IBM, and HP-UX from Hewlett Packard, are standard-adhering direct descendants of the original Unix systems.

A number of other systems are "spiritual" descendents of Unix, even though they contain none of the original Unix source code. The most notable of these systems is GNU/Linux, which has seen a meteoric rise in popularity. However, a large number of systems derived from the 4.4-BSD-Lite distribution are also popular. All of these systems offer standards compliance and compatibility with SVR4 and earlier versions of BSD.

This edition of Unix in a Nutshell attempts to define the cross-section of features and commands that "make a Unix system Unix." To that end, it covers three of the most popular and representative systems now available.

Solaris 10

Solaris 10 is a distributed computing environment from Sun Microsystems. Solaris includes the SunOS 5.10 operating system, plus additional features such as the Common Desktop Environment, GNOME, and Java tools. In addition, the kernel has received significant enhancement to support multiprocessor CPUs, multithreaded processes, kernel-level threads, and dynamic loading of device drivers and other kernel modules. Most of the user-level (and system administration) content comes from SVR4. As a result, Solaris 10 is based on SVR4 but contains additional BSD/SunOS features. To help in the transition from the old (largely BSD-based) SunOS, Solaris provides the BSD/SunOS Compatibility Package and the Binary Compatibility Package.

Sun has made binary versions of Solaris for the SPARC and Intel architectures available for "free," for noncommercial use. You pay only for the media, shipping, and handling, or you may download installation CD images. To find out more, see http://www.sun.com/developer.

As this book was going to press, Sun announced that it would be making the source code for Solaris available as Open Source. For more details, see http://www.opensolaris.org.

Fedora GNU/Linux

There are many distributions of GNU/Linux (the combination of the GNU utilities with the Linux kernel to make a complete operating environment). We have chosen the Fedora Core 3 system from Red Hat, Inc.[*] To find out more, see http://fedora.redhat.com.

Mac OS X 10.4 (Tiger)

Mac OS X introduced a revolution into the Macintosh world, with a slick new interface (Aqua) running atop a powerful OS kernel based on Mach and FreeBSD. The shell level utilities are largely from FreeBSD. The 10.4 (a.k.a. "Tiger") release is current as of this writing. To find out more, see http://www.apple.com/macosx.

One important "quirk" of Mac OS X is worth noting. The default HPFS filesystem stores filenames in their original case, but it ignores case when looking for files. In practice, this make surprisingly little difference. However, it can occasionally have weird side effects, since things like command completion in the Bash shell are still case-sensitive.

[*] This is undoubtedly cause to receive hate-mail from the advocates of other distributions. In our defense, we can only claim that it's impossible to cover every GNU/Linux distribution, and that for everyday use with a shell prompt, the systems are all extremely similar.

Obtaining Compilers

If you wish to build programs from source code, you need a compiler. Almost all Unix applications are written in C or C++, with the majority still written in C. This section describes obtaining compilers for the three systems covered in this book.

Solaris

Solaris 10 includes a Java compiler. Earlier versions of Solaris did not come with C or C++ compilers. You had to either buy compilers from Sun, from other third party vendors, or find a binary of some version of GCC for use in bootstrapping the latest version of GCC.

The final version of Solaris 10 now includes GCC (both C and C++ compilers) in /usr/sfw/bin. This is true for both the SPARC and Intel x86 versions. You thus have a choice: you may use the supplied GCC, or buy high-quality C and C++ compilers from Sun.

Besides GCC, a very large number of precompiled packages is available from http://www.sunfreeware.com/. You should see both the "Download/Install" and "FAQ" sections of that web site.

All the software from http://www.sunfreeware.com is in pkgadd format and is installable using that command. (See Chapter 6.) We recommend reading the details on the web site, which will always be up to date.

Note that many commands discussed in this book won't be on your system if all you've done is an end user install. If you can afford the disk space, do at least a developer install. This also installs many of the header files and libraries that you need in order to compile programs from source code.

For support issues and publicly released patches to Solaris, the web starting point is http://sunsolve.sun.com.

GNU/Linux

GNU/Linux systems usually install software development tools by default. If your system does not have compiler tools or make (see Chapter 16), then you will have to find the appropriate package(s) for your distribution. This is likely to be one or more .rpm or .deb files on your distribution media (CD or DVD), or you may be able to install it over the Internet, using a package manager such as apt or yum.

At a minimum, you will need the GNU Compiler Collection (GCC), system header files and libraries, the GNU Binutils (assembler, loader, ar, etc.), and make.

Mac OS X

Unix-style development tools (compiler, make) are included as part of the larger Xcode Tools package . Boxed distributions of Mac OS X include an Xcode Tools CD. The easiest way to install the tools is to insert that CD into your CD drive.

If your version of Mac OS X is that which came with your hardware, you won't have an Xcode Tools CD. Instead, click on Developer.mpkg in /Applications/Installers/Developer Tools. Doing so installs the development tools.

Building Software

Many of the programs listed in Chapter 2 are available in source code form from the Internet. For GNU/Linux and Mac OS X, you may be able to use a package manager to download and install the software (see Chapter 6). Similarly, for Solaris, you may be able to get a precompiled version of the program from http://www.sunfreeware.com/.

However, it's possible, particularly on a commercial Unix system, that you will want (or need) to download the source and build the program yourself if you don't have it, or if you wish to obtain the very latest version. This section outlines the conventional build process.

Most Internet software is written in C or C++. To compile it you will need a compiler. See the previous section for a discussion of where to get a compiler if you don't have one.

Today's programs usually use the GNU Project's Autoconf software suite for managing portability issues. Autoconf generates a shell script named configure, which tests various aspects of the target system. The end result of running configure is a Makefile custom-tuned to the particular system (see Chapter 16), and a header file describing the features available, or missing, from the system. As a result, the recipe for building software is usually quite simple, consisting of the following:

Download the software. This can be done with a noninteractive program such as wget or curl (see their entries in Chapter 2), or interactively using anonymous FTP for programs distributed that way.

Decompress and extract the software.

Change directory into the program's distribution directory.

Run configure.

Run make.

Optionally, run the program's self-test suite.

Run make install, usually as root, to install the software.

The following example uses GNU sed to illustrate the process. The steps are similar or identical for all GNU software, and for most other freely-available programs as well.

First, we obtain the program using wget:

    $ wget ftp://ftp.gnu.org/gnu/sed/sed-4.1.4.tar.gz
               Retrieve the latest version
    --15:00:04--  ftp://ftp.gnu.org/gnu/sed/sed-4.1.4.tar.gz
               => 'sed-4.1.4.tar.gz'
    Resolving ftp.gnu.org... 199.232.41.7
    Connecting to ftp.gnu.org[199.232.41.7]:21... connected.
    Logging in as anonymous ... Logged in!
    ==> SYST ... done.    ==> PWD ... done.
    ==> TYPE I ... done.  ==> CWD /gnu/sed ... done.
    ==> PASV ... done.    ==> RETR sed-4.1.4.tar.gz ... done.
    Length: 794,257 (unauthoritative)

    100%[==================================>] 794,257      60.04K/s    ETA 00:00

    15:00:29 (38.86 KB/s) - 'sed-4.1.4.tar.gz' saved [794257]

The next step is to decompress and extract the software:

    $ gzip -d < sed-4.1.4.tar.gz | tar -xpvf -
               Extract source code
    sed-4.1.4/
    sed-4.1.4/ABOUT-NLS
    sed-4.1.4/AUTHORS
    sed-4.1.4/BUGS
    ...

Next we change into the directory and run configure:

    $ cd sed-4.1.4
               Change directory
    $ ./configure && make
               Run configure and make
    checking for a BSD-compatible install... /usr/bin/install -c
    checking whether build environment is sane... yes
    checking for gawk... gawk
    checking whether make sets $(MAKE)... yes
    ...

The && construct runs make only if configure finishes successfully (see Chapter 4).

Next, we run the test suite, to ensure that there were no problems:

    $ make check
               Test the build
    Making check in intl                               Lots of output omitted
    ...
    PASS: dc
    ===================
    All 71 tests passed
    ===================

Finally, we install the software. This may require administrative privileges:

    $ su root
               Change to superuser
    Password:                                          Password is not echoed
    # make install
               Install GNU sed into /usr/local
    ...

What's in the Quick Reference

This guide presents the major features of Solaris, GNU/Linux, and Mac OS X. In addition, this guide presents chapters on Emacs, RCS, CVS, Subversion, GNU Make, and GDB, the GNU debugger. Although they are not part of commercial Unix systems, they are found on many Unix systems because they are useful add-ons.

But keep in mind: if your system doesn't include all the component packages, there will be commands in this book you won't find on your system.

The summary of Unix commands in Chapter 2 makes up a large part of this book. Only user/programmer commands are included; administrative commands are purposely ignored. Chapter 2 describes the following set:

Commands and options in Solaris, GNU/Linux, and Mac OS X. This includes many "essential" tools for which source and/or binaries are available via the Internet

Solaris-only tools

GNU/Linux-only tools

Mac OS X-only tools

Java-related tools

Beginner's Guide

If you're just beginning to work on a Unix system, the abundance of commands might prove daunting. To help orient you, the following lists present a small sampling of commands on various topics.

Communication

ftp

Interactive file transfer program.

login

Sign on to Unix.

mailx

Read or send mail.

slogin

Sign on to remote Unix using secure shell.

ssh

Connect to another system, securely.

Comparisons

cmp

Compare two files, byte by byte.

comm

Compare items in two sorted files.

diff

Compare two files, line by line.

diff3

Compare three files.

dircmp

Compare directories.

sdiff

Compare two files, side by side.

File Management

cd

Change directory.

chgrp

Change file group.

chmod

Change access modes on files.

chown

Change file owner.

cksum

Print a file checksum, POSIX standard algorithm.

cp

Copy files.

csplit

Break files at specific locations.

file

Determine a file's type.

head

Show the first few lines of a file.

less

A sophisticated interactive pager program for looking at information on a terminal, one screenful (or "page") at a time. The name is a pun on the more program.

ln

Create filename aliases.

locate

Find a file somewhere on the system based on its name. The program uses a database of files that is usually automatically rebuilt, nightly.

ls

List files or directories.

md5sum

Print a file checksum using the Message Digest 5 (MD5) algorithm.

mkdir

Create a directory.

more

Display files by screenful.

mv

Move or rename files or directories.

pwd

Print working directory.

rm

Remove files.

rmdir

Remove directories.

scp

Copy files to remote system securely.

split

Split files evenly.

tail

Show the last few lines of a file.

wc

Count lines, words, and characters.

Miscellaneous

banner

Make posters from words.

bc

Arbitrary precision calculator.

cal

Display calendar.

calendar

Check for reminders.

clear

Clear the screen.

info

The GNU Info system for online documentation.

man

Get information on a command.

nice

Reduce a job's priority.

nohup

Preserve a running job after logging out.

passwd

Set your login password.

script

Produce a transcript of your login session.

spell

Report misspelled words.

su

Switch to a different user.

Printing (BSD Commands)

lpr

Send to the printer.

lpq

Get printer status.

lprm

Cancel a printer request.

pr

Format and paginate for printing.

Printing (System V Commands)

cancel

Cancel a printer request.

lp

Send to the printer.

lpstat

Get printer status.

pr

Format and paginate for printing.

Programming

cc

C compiler.

ctags

C function references (for vi).

ld

Loader.

lex

Lexical analyzer generator.

make

Execute commands in a specified order.

od

Dump input in various formats.

splint

C program analyzer.

strace

Trace signals and system calls.

strip

Remove data from an object file.

truss

Trace signals and system calls.

yacc

Parser generator. Can be used with lex.

Searching

egrep

Extended version of grep.

fgrep

Search files for literal words.

find

Search the system for filenames matching patterns or attributes.

grep

Search files for text patterns.

strings

Display text strings found in binary files.

Shells

Bourne family shells:

bash

The GNU Project's Bourne Again Shell.

ksh

The Korn shell, either an original or clone, depending upon the operating system.

pdksh

The Public Domain Korn shell.

sh

The original Bourne shell, particularly on commercial Unix systems.

zsh

The Z-shell.

C shell family shells:

csh

The original BSD C shell.

tcsh

The "Tenex" C shell: a much-enhanced version of csh.

Shell Programming

basename

Print the last component of a pathname, optionally removing a suffix.

dirname

Print all but the last component of a pathname.

echo

Repeat command-line arguments on the output.

expr

Perform arithmetic and comparisons.

id

Print user and group ID and name information.

line

Read a line of input.

printf

Format and print command-line arguments.

sleep

Pause during processing.

test

Test a condition.

Storage

bunzip2

Expand files compressed with bzip2 (.bz2 files).

bzip2

Very high quality file compression program.

cpio

Copy archives in or out.

gunzip

Expand compressed (.gz and .Z) files.

gzcat

Display contents of compressed files (may be linked to zcat).

gzip

Compress files to free up space.

tar

File tree and tape archiver.

zcat

Display contents of compressed files.

System Status

at

Execute commands later.

crontab

Automate commands.

date

Display or set date.

df

Show free disk space.

du

Show disk usage.

env

Show environment variables.

finger

Display information about users.

kill

Terminate a running command.

ps

Show processes.

stty

Set or display terminal settings.

who

Show who is logged on.

Text Processing

awk

A pattern-matching programming language for working with text files.

cat

Concatenate files or display them.

cut

Select columns for display.

ex

Line editor underlying vi.

fmt

Produce roughly uniform line lengths.

iconv

General-purpose character-encoding conversion tool.

join

Merge different columns into a database.

paste

Merge columns or switch order.

sed

Noninteractive text editor.

sort

Sort or merge files.

tr

Translate (redefine) characters.

uniq

Find repeated or unique lines in a file.

vi

Visual text editor.

xargs

Process many arguments in manageable portions.

Solaris: Standard Compliant Programs

Where the behavior specified by the POSIX standard differs from the historical behavior provided by a command, Solaris provides a different version of the command in either /usr/xpg6/bin or in /usr/xpg4/bin. On Solaris systems, you should place these two directories into your search path before the standard /usr/bin directory. Some of these commands are not covered in this book, since they are either administrative commands or are obsolete. Also, today, it is unlikely that the commands in /usr/ucb will be useful; you probably should not have that directory in your search path.

ar

delta

file

kill

nm

tail

awk

df

find

link

nohup

tr

basename

du

get

ln

od

ulimit

bc

ed

getconf

ls

pr

vedit

chgrp

edit

getopts

m4

rm

vi

chown

egrep

grep

make

sccs

view

cp

env

hash

more

sed

wait

ctags

ex

id

mv

sh

who

date

expr

ipcs

nice

sort

xargs

dc

fgrep

jobs

nl

stty

Chapter 2. Unix Commands

Introduction

This chapter presents the Unix commands of interest to users and programmers. Most of these commands appear in the "Commands" section of the online manual. With rare exception, this book purposely avoids system administration commands, because system administration is beyond its scope. The focus instead is on everyday commands, those used both interactively and for programming.

Summarizing three operating systems that are similar but not identical is a daunting task. In order to make a coherent presentation, the chapter is organized as follows:

Common Commands

This section lists commands that should be available on just about any Unix system. We have included here many commands that are downloadable from the Internet and that are standard with GNU/Linux, such as autoconf or wget, even though they may not come "out of the box" on commercial Unix systems. Wherever possible, we provide a URL from which the source to the command may be downloaded, so that you can build the program yourself if you want it. See the section "Obtaining Compilers" in Chapter 1 for what to do if you don't have a C compiler for your system.

Additionally, we have made an effort to be as concise as possible. For example, GNU-style long options are listed side-by-side with their standard single-letter counterparts. Similarly, several commands have associated with them additional more specialized commands that are needed only rarely. We simply list such commands as "related," without giving them separate entries. For such commands, you should then see your system's online manual pages or other documentation.

Solaris Commands

This section lists the important commands that are available only on Solaris.

GNU/Linux Commands

This section lists the important commands that are available only on GNU/Linux.

Mac OS X Commands

This section lists the important commands that are available only on Mac OS X.

Java Commands

The primary commands for doing Java development. These are (essentially) the same across all systems.

Even commands that appear in the section "Alphabetical Summary of Common Commands" are not identical on all systems. Thus, here too we've made an effort to describe the common behavior first, with additional subsections on system specific behavior. This occurs most frequently for the different options that different versions of the commands accept.

In the command summaries, each entry is labeled with the command name on the left-hand edge of the page. The syntax line is followed by a brief description and a list of all available options. Many commands come with examples at the end of the entry. If you need only a quick reminder or suggestion about a command, you can skip directly to the examples.

Some options can be invoked only by a user with special system privileges. Such a person is often called a "superuser." This book uses the term privileged user instead.

Typographic conventions for describing command syntax are listed in the Preface. For additional help in locating commands, see the Index.

Finding Commands on Solaris

Solaris systems provide a number of "bin" directories underneath /usr for different kinds of commands. For example, /usr/bin holds most regular commands, /usr/java/bin has the Java commands, and so on. The bin directories are summarized in Table 2-1.

Table 2-1. Solaris bin directories

Directory

Purpose

/bin

Symbolic link to /usr/bin

/sbin

System administration commands

/usr/sbin

More system administration commands

/usr/bin

Regular commands

/usr/X/bin

X Window System utilities

/usr/ccs/bin

C Compilation System: compiler-related programs

/usr/dt/bin

Common Desktop Environment (CDE) programs

/usr/java/bin

Java programs

/usr/openwin/bin

OpenWindows programs

/usr/perl5/bin

The perl command and its related programs

/usr/sfw/bin

Additional software from the Internet

/usr/ucb

Berkeley Unix compatibility programs

/usr/xpg4/bin

Standards-compliant versions of regular utilities

/usr/xpg6/bin

More standards compliant versions of regular utilities

We strongly recommend placing /usr/xpg6/bin and /usr/xpg4/bin in your shell search path before the other directories. Solaris is unique among modern Unix systems in that the versions in /usr/bin continue to be the original System V Release 4 versions of the commands. Today, with just about every other system being POSIX compliant, you should set up your Solaris account to be POSIX compliant too! For Bash or the Korn shell, use something like this in your .profile file:

    # Use multiple lines to fit on the page:
    PATH="/usr/xpg6/bin:/usr/xpg4/bin:/usr/ccs/bin:/usr/bin:/usr/java/bin"
    PATH="$PATH:/usr/sfw/bin:/usr/perl5/bin"
    PATH="$PATH:/usr/dt/bin:/usr/X/bin:/usr/openwin/bin"

The Solaris Software Companion CD contains unsupported copies of many popular Free Software and Open Source programs from the Internet. They install under /opt/sfw. If you install this software, you may wish to add /opt/sfw/bin to your path as well.

Finding Commands on GNU/Linux and Mac OS X

The situation on GNU/Linux and Mac OS X is considerably simpler. For both systems, a path like the following suffices:

    PATH=/bin:/usr/bin:/usr/X11R6/bin

On Mac OS X the default path is /bin:/sbin:/usr/bin:/usr/sbin. You may wish to add the X11 directory to it:

    PATH=$PATH:/usr/X11R6/bin

Tip

Essentially every GNU/Linux program accepts long options (such as --fire-phasers) besides the traditional short ones (-F). In addition, just about every GNU/Linux program accepts the options --help and --version, to print a command-line summary and version information respectively. In the interests of brevity, the individual command descriptions omit the --help and --version options, and they omit the statement that long options apply only to GNU/Linux programs.

Alphabetical Summary of Common Commands

This list describes the commands that are common to two or more of Solaris, GNU/Linux, and Mac OS X. It also includes many programs available from the Internet that may not come "out of the box" on all the systems.

On Solaris, many of the Free Software and Open Source programs described here may be found in /usr/sfw/bin or /opt/sfw/bin. Interestingly, the Intel version of Solaris has more programs in /opt/sfw/bin than does the SPARC version. As mentioned earlier, on Solaris, we recommend placing /usr/xpg6/bin and /usr/xpg4/bin in your PATH before /usr/bin.

Name

aclocal

Synopsis

    aclocal [options]

Part of GNU automake. Place m4 macro definitions needed by autoconf into a single file. The aclocal command first scans for macro definitions in m4 files in its default directory (/usr/share/aclocal on some systems) and in the file acinclude.m4. It next scans for macros used in the configure.ac file. It generates an aclocal.m4 file that contains definitions of all m4 macros required by autoconf. See also automake.

Options

--acdir= dir

Look for macro files in directory dir instead of the default directory.

--force

Always update the output file.

-I dir

Additionally, search directory dir for m4 macro definitions.

--output= file

Save output to file instead of aclocal.m4.

--print-ac-dir

Print the name of the directory to be searched for m4 files, then exit.

--verbose

Print names of files being processed.

Name

apropos

Synopsis

              apropos
              keywords

Look up one or more keywords in the online manpages. Same as man -k. See also whatis.

Name

ar

Synopsis

    ar key [args] [posname] [count] archive[files]

Maintain a group of files that are combined into a file archive. Used most commonly to create and update library files as used by the loader (ld). Only one key letter can be used, but each may be combined with additional args (with no separations between). posname is the name of a file in archive. When moving or replacing files, you can specify that they be placed before or after posname.

On all three systems, key and args can be preceded with a -, as though they were regular options.

Solaris: ar is found in /usr/ccs/bin.

Key

d

Delete files from archive.

m

Move files to end of archive.

p

Print files in archive.

q

Append files to archive.

r

Replace files in archive.

t

List the contents of archive or list the named files.

x

Extract contents from archive or only the named files.

Common Arguments

a

Use with r or m to place files in the archive after posname.

b

Same as a but before posname.

c

Create archive silently.

i

Same as b.

s

Force regeneration of archive symbol table (useful after running strip).

u

Use with r to replace only files that have changed since being put in archive.

v

Verbose; print a description.

Solaris and GNU/Linux Argument

V

Print version number.

Solaris and Mac OS X Argument

T

Truncate long filenames when extracting onto filesystems that don't support long filenames. Without this operation, extracting files with long filenames is an error.

Solaris Argument

C

Don't replace existing files of the same name with the one extracted from the archive. Useful with T.

GNU/Linux Arguments

f

Truncate long filenames.

N

Use the count parameter. Where multiple entries with the same name are found, use the count instance.

o

Preserve original timestamps.

P

Use full pathname. Useful for non-POSIX-compliant archives.

S

Do not regenerate the symbol table.

Mac OS X Argument

L

Provide support for long filenames. This is the default.

Example

Update the versions of object files in mylib.a with the ones in the current directory. Only files in the mylib.a that are also in the current directory are replaced.

    ar r mylib.a *.o

Name

as

Synopsis

    as [options]files

Generate an object file from each specified assembly language source file. Object files have the same rootname as source files but replace the .s suffix with .o. as is usually called by compiler driver programs such as cc or gcc.

Each system has options specific to it, often too many options to comprehend easily. See your local as(1) manpage.

Solaris: as is found in /usr/ccs/bin.

Common Option

-o objfile

Place output in object file objfile (default is file .o).

Name

at

Synopsis

    at options1 time [date] [+ increment]
    at options2 [jobs]

Execute commands entered on standard input at a specified time and optional date. (See also batch and crontab.) End input with EOF. time can be formed either as a numeric hour (with optional minutes and modifiers) or as a keyword. date can be formed either as a month and date, as a day of the week, or as a special keyword. increment is a positive integer followed by a keyword. See the following lists for details.

Common Options1

-f file

Execute commands listed in file.

-m

Send mail to user after job is completed.

Solaris Options1

-c

Use the C shell to execute the job.

-k

Use the Korn shell to execute the job.

-p project

Schedule the job under project.

-q queuename

Schedule the job in queuename. Values for queuename are the lowercase letters a through z. Queue a is the default queue for at jobs. Queue b is the queue for batch jobs. Queue c is the queue for cron jobs.

-s

Use the Bourne shell to execute the job.

-t time

Run the job at time, which is in the same format as allowed by touch.

GNU/Linux Options1

-c

Display the specified jobs on the standard output. This option does not take a time specification.

-V

Display the version number.

Common Options2

-l

Report all jobs that are scheduled for the invoking user or, if jobs are specified, report only for those. See also atq.

Solaris and Mac OS X Options2

-r

Remove specified jobs that were previously scheduled. To remove a job, you must be a privileged user or the owner of the job. Use -l first to see the list of scheduled jobs. See also atrm.

GNU/Linux Options2

-d

Same as Solaris or Mac OS X -r.

Time

hh:mm[modifiers]

Hours can have one or two digits (a 24-hour clock is assumed by default); optional minutes can be given as one or two digits; the colon can be omitted if the format is h, hh, or hhmm; e.g., valid times are 5, 5:30, 0530, 19:45. If modifier am or pm is added, time is based on a 12-hour clock. If the keyword zulu is added, times correspond to Greenwich Mean Time (UTC).

midnight|noon|now

Use any one of these keywords in place of a numeric time. now must be followed by an increment.

Date

month num[,year]

month is one of the 12 months, spelled out or abbreviated to their first three letters; num is the calendar day of the month; year is the four-digit year. If the given month occurs before the current month, at schedules that month next year.

day

One of the seven days of the week, spelled out or abbreviated to their first three letters.

today|tomorrow

Indicate the current day or the next day. If date is omitted, at schedules today when the specified time occurs later than the current time; otherwise, at schedules tomorrow.

Increment

Supply a numeric increment if you want to specify an execution time or day relative to the current time. The number should precede any of the keywords minute, hour, day, week, month, or year (or their plural forms). The keyword next can be used as a synonym for + 1.

Examples

In typical usage, you run at and input commands that you want executed at a particular time, followed by EOF. The GNU/Linux version prompts for input with at>; the other systems do not.

    $ at 1:00 am tomorrow
    at> ./total_up > output
    at> mail joe < output
    at> <EOT>
                     Entered by pressing CTRL-D
    job 1 at 2003-03-19 01:00

The two commands could also be placed in a file and submitted as follows:

    $ at 1:00 am tomorrow < scriptfile

More examples of syntax follow. Note that the first two commands are equivalent.

    at 1945 pm December 9
    at 7:45pm Dec 9
    at 3 am Saturday
    at now + 5 hours
    at noon next day

Name

atq

Synopsis

    atq [options] [users]

List jobs created by the at command that are still in the queue. Normally, jobs are sorted by the order in which they execute. Specify the users whose jobs you want to check. If no users are specified, the default is to display all jobs if you're a privileged user; otherwise, only your jobs are displayed.

Solaris Options

-c

Sort the queue according to the time the at command was given.

-n

Print only the total number of jobs in queue.

GNU/Linux and Mac OS X Option

-q queue

Show the jobs in queue queue.

GNU/Linux Option

-V

Print the version number to standard error.

Mac OS X Option

-v

Show jobs that are completed but not yet removed from the queue.

Name

atrm

Synopsis

    atrm [options] [users | jobIDs]

Remove jobs queued with at that match the specified jobIDs. A privileged user may also specify the users whose jobs are to be removed.

Solaris Options

-a

Remove all jobs belonging to the current user. (A privileged user can remove all jobs.)

-f

Remove jobs unconditionally, suppressing all information regarding removal.

-i

Prompt for y (remove the job) or n (do not remove).

GNU/Linux and Mac OS X Option

-q queue

Remove the jobs in queue queue.

GNU/Linux Option

-V

Print the version number to standard error.

Name

autoconf

Synopsis

    autoconf [options] [template_file]

Generate a configuration script from m4 macros defined in template_file, if given, or in a configure.ac or configure.in file in the current working directory. The generated script is almost invariably called configure.

Other related programs come as part of autoconf. They are usually invoked automatically by tools in the autoconf suite. They are:

autoreconf

Update configure scripts by running autoconf, autoheader, aclocal, automake, and libtoolize as needed.

autoscan

Create or maintain a preliminary configure.ac file named configure.scan based on source files in specified directory, or the current directory if none given.

autoupdate

Update the configure template file file, or configure.ac if no file is specified.

URL: http://www.gnu.org/software/autoconf.

Options

-d, --debug

Don't remove temporary files.

-f, --force

Replace files generated previously by autoconf.

-i, --initialization

When tracing calls with the -t option, report calls made during initialization.

-Idir, --include=dir

Search in directory dir for input files.

-ofile, --output=file

Save output to file.

-tmacro, --trace=macro

Report the list of calls to macro.

-v, --verbose

Verbosely print information about the progress of autoconf.

-Wcategory, --warnings=category

Print any warnings related to category. Accepted categories are:

all

All warnings.

cross

Cross compilation.

error

Treat warnings as errors.

no- category

Turn off warnings for category.

none

Turn off all warnings.

obsolete

Obsolete constructs.

syntax

Questionable syntax.

Name

autoheader

Synopsis

    autoheader [options] [template_file]

Part of GNU autoconf. Generate a template file of C #define statements from m4 macros defined in template_file, if given, or in a configure.ac or configure.in file in the current working directory. The generated template file is almost invariably called config.h.in or config.hin.

Options

-Bdir, --prepend-include=dir

Prepend directory dir to the search path for input files.

-d, --debug

Don't remove temporary files.

-f, --force

Replace files generated previously by autoheader.

-Idir, --include=dir

Append directory dir to the search path for input files.

-ofile, --output=file

Save output to file.

-v, --verbose

Verbosely print information about the progress of autoheader.

-V, --version

Print version number, then exit.

-Wcategory, --warnings=category

Print any warnings related to category. Accepted categories are:

all

All warnings.

cross

Cross compilation.

error

Treat warnings as errors.

gnu

GNU coding standards.

no- category

Turn off warnings for category.

none

Turn off all warnings.

obsolete

Obsolete constructs.

override

User redefinitions of automake variables or rules.

portability

Portability issues.

syntax

Questionable syntax.

unsupported

Unsupported or incomplete features.

Name

automake

Synopsis

    automake [options] [template_file]

GNU automake tool. Creates GNU standards-compliant Makefile.in files from Makefile.am template files and can be used to ensure that projects contain all the files and installation options required to be standards-compliant.

URL: http://www.gnu.org/software/automake.

Options

-a, --add-missing

Add any missing files automake requires to the directory by creating symbolic links to automake's default versions.

-c, --copy

Used with the -a option. Copy missing files instead of creating symbolic links.

--cygnus

Specifies that the project has a Cygnus-style source tree.

-f, --force-missing

Used with the -a option. Replace required files even if a local copy already exists.

--foreign

Treat project as a non-GNU project. Check only for elements required for proper operation.

--gnits

A stricter version of --gnu, performing more checks to comply with GNU project structure rules.

--gnu

Treat project as a GNU project with the GNU project structure.

-i, --ignore-deps

Disable automatic dependency tracking.

--include-deps

Enable automatic dependency tracking.

--libdir= dir

Used with the -a option. Search in directory dir for default files.

--no-force

Update only Makefile.in files that have updated dependents.

-v, --verbose

List files being read or created by automake.

-Wcategory, --warnings=category

Print any warnings related to category. Accepted categories are:

all

All warnings.

error

Treat warnings as errors.

gnu

GNU coding standards.

no- category

Turn off warnings for category.

none

Turn off all warnings.

obsolete

Obsolete constructs.

override

User redefinitions of automake variables or rules.

portability

Portability issues.

syntax

Questionable syntax.

unsupported

Unsupported or incomplete features.

Name

awk

Synopsis

    awk [options] [program] [var=value ...] [files]

Use the pattern-matching program to process the specified files. program instructions have the general form:

pattern { procedure }

pattern and procedure are optional. When specified on the command line, program must be enclosed in single quotes to prevent the shell from interpreting its special symbols.

Two versions of awk exist: the original, "old" awk from V7 Unix, circa 1979, and "new" awk, from System V Release 4. POSIX awk is based on the new one.

On most systems, awk is a POSIX-compliant version, except on Solaris, where you must use /usr/xpg4/bin/awk instead of /usr/bin/awk. Some systems provide oawk and nawk commands as well. See Chapter 11 for more information (including examples) on awk.

Name

banner

Synopsis

    banner characters

Print characters as a poster on the standard output. Each word supplied must contain 10 characters or less.

The figlet program is more useful and flexible (http://www.figlet.org).

Name

basename

Synopsis

    basename pathname [suffix]
    basename [-a] [-s suffix] pathname ...

Given a pathname, strip the path prefix and leave just the filename, which is printed on standard output. If specified, a filename suffix (e.g., .c) is removed also. basename is typically invoked via command substitution ('...') to generate a filename. See also dirname.

Solaris: The version of basename in /usr/bin allows the suffix to be a pattern of the form accepted by expr. See the entry for expr for more details. The version is /usr/xpg4/bin does not treat the suffix specially.

The second syntax is for Mac OS X.

Mac OS X Options

-a

Treat every argument as a pathname, removing the leading components.

-s suffix

Use suffix as the suffix to remove from each following pathname.

Example

Given the following fragment from a Bourne shell script:

    ofile=output_file
    myname="'basename $0'"
    echo "$myname: QUITTING: can't open $ofile" 1>&2
    exit 1

If the script is called do_it, the following message would be printed on standard error:

    do_it: QUITTING: can't open output_file

Name

bash

Synopsis

    bash [options] [file [arguments]]
    sh [options] [file [arguments]]

Bash is the GNU Project's Bourne Again shell. On GNU/Linux systems and Mac OS X, it is the standard shell, doing double duty as /bin/sh. It is also supplied with Solaris. For more information, see Chapter 4.

URL: http://www.gnu.org/software/bash.

Name

batch

Synopsis

    batch [options] [time]

Execute commands entered on standard input. End with EOF. Unlike at, which executes commands at a specific time, batch executes commands one after another (waiting for each one to complete). This avoids the potentially high system load caused by running several background jobs at once. The GNU/Linux and Mac OS X versions allow you to specify time, which is when the job should run. See also at.

On Solaris, batch is equivalent to at -q b -m now. It takes no arguments, reading commands from standard input. Instead of the original System V version, Mac OS X uses an earlier version of the same batch command found on GNU/Linux. The GNU/Linux version has more options.

Tip

On Mac OS X, at, atq, atrm and batch are disabled by default. See the at(1) manpage for more information.

Solaris Option

-p project

Run the job under project project.

GNU/Linux and Mac OS X Options

-f file

Read the job commands from file instead of from standard input.

-m

Send mail to the user when the job is done.

GNU/Linux Options

-q queue

Use job queue queue. See the entry for at for more information.

-v

Show the time when the job will run.

-V

Print version information to standard error before reading the job.

Example

$ batch
                     sort data.raw > data.sorted
                     troff -Tps -mm thesis.mm > bigfile.psEOF

Name

bc

Synopsis

    bc [options] [files]

Interactively perform arbitrary-precision arithmetic or convert numbers from one base to another. Input can be taken from files or read from the standard input. To exit, type quit or EOF.

bc is a language (and compiler) whose syntax resembles that of C, but with unlimited-precision arithmetic. bc consists of identifiers, keywords, and symbols. Examples are given at the end. GNU/Linux and Mac OS X both use GNU bc.

URL: http://www.gnu.org/software/bc/.

Common Option

-l, --mathlib

Make functions from the math library available. This is the only option required by POSIX.

Solaris Options

-c

Do not invoke dc; compile only. (On Solaris, and on most commercial Unix systems, bc is a preprocessor for dc, so bc normally invokes dc.)

GNU bc Options

-h, --help

Print help message and exit.

-i, --interactive

Interactive mode.

-q, --quiet

Do not display welcome message.

-s, --standard

Ignore all extensions, and process exactly as in POSIX.

-v, --version

Print version number.

-w, --warn

When extensions to POSIX bc are used, print a warning.

Examples

Note in these examples that when you type some quantity (a number or expression), it is evaluated and printed, but assignment statements produce no display:

    $ bc
                     Stat the program
                     ibase = 8
                     Octal input
                     20
                     Evaluate this octal number
    16                Terminal displays decimal value
                     obase = 2
                     Display output in base 2 instead of base 10
                     20
                     Octal input
    10000             Terminal now displays binary value
                     ibase = A
                     Restore base 10 input
                     scale = 3
                     Truncate results to three places
                     8/7
                     Evaluate a division
    1.001001000       Oops! Forgot to reset output base to 10
                     obase = 10
                     Input is decimal now, so "A" isn't needed
                     8/7
    1.142Terminal displays result (truncated)

The following lines show the use of functions:

    $ bc
                     Start the program
                     define p(r,n){
                     Function p uses two arguments
                     auto v
                     v is a local variable
                     v = r^n
                     r raised to the n power
                     return(v)}
                     Value returned
                     scale = 5
                     x = p(2.5,2)
                     x = 2.5 ^ 2
                     x
                     Print value of x
    6.25
    length(x)
                     Number of digits
    3
    scale(x)
                     Number of places to right of decimal point
    2

Name

biff

Synopsis

    biff [y | n]

Turn mail notification on or off. With no arguments, biff indicates the current status.

When mail notification is turned on, each time you get incoming mail, the bell rings, and the first few lines of each message are displayed.

Solaris: This command is in /usr/ucb.

Name

bison

Synopsis

    bison [options]file

Given a file containing a context-free grammar, convert it into tables for subsequent parsing while sending output to file.c. This utility is to a large extent compatible with yacc, and in fact is named for it. All input files should use the suffix .y; output files will use the original prefix.

URL: http://www.gnu.org/software/bison.

Options

-bprefix, --file-prefix=prefix

Use prefix for all output files.

-dfile, --defines=file

Generate file (usually with a .h suffix), producing #define statements that relate bison's token codes to the token names declared by the user.

-h, --help

Print a help message and exit.

-k, --token-table

Include token names and values of YYNTOKENS, YYNNTS, YYNRULES, and YYNSTATES in file.c.

-l, --no-lines

Exclude #line constructs from code produced in file.c. (Use after debugging is complete.)

-n, --no-parser

Suppress parser code in output, allowing only declarations. Assemble all translations into a switch statement body and print it to file .act.

-ofile, --output-file=file

Output to file.

-pprefix, --name-prefix=prefix

Substitute prefix for yy in all external symbols.

-r, --raw

Use bison token numbers, not yacc-compatible translations, in file.h.

-t, --debug

Compile runtime debugging code.

-v, --verbose

Verbose mode. Print diagnostics and notes about parsing tables to file .output.

-V, --version

Display version number.

-y, --yacc, --fixed-output-files

Duplicate yacc's conventions for naming output files.

Name

bzip2

Synopsis

    bzip2 [options] filenames
bunzip2 [options] filenames
bzcat [option] filenames
bzip2recoverfilenames

File compression and decompression utility similar to gzip, but uses a different algorithm and encoding method to get better compression. bzip2 replaces each file in filenames with a compressed version of the file and with a .bz2 extension appended. bunzip2 decompresses each file compressed by bzip2 (ignoring other files, except to print a warning). bzcat decompresses all specified files to standard output, and bzip2recover is used to try to recover data from damaged files.

Additional related commands include bzcmp, which compares the contents of bzipped files; bzdiff, which creates diff (difference) files from a pair of bzip files; bzgrep, to search them; and the bzless and bzmore commands, which apply the more and less commands to bunzip2 output as bzcat does with the cat command. See cat, cmp, diff, grep, less, and more for information on how to use those commands.

URL: http://www.bzip.org.

Options

--

End of options; treat all subsequent arguments as filenames.

- dig

Set block size to dig × 100KB when compressing, where dig is a single digit from 1 to 9.

--best

Same as -9.

-c, --stdout

Compress or decompress to standard output.

-d, --decompress

Force decompression.

--fast

Same as -1.

-f, --force

Force overwrite of output files. Default is not to overwrite. Also forces breaking of hard links to files.

-k, --keep

Keep input files; don't delete them.

-L, --license, -V, --version

Print license and version information and exit.

-q, --quiet

Print only critical messages.

-s, --small

Use less memory, at the expense of speed.

-t, --test

Check the integrity of the files, but don't actually decompress them.

-v, --verbose

Verbose mode. Show the compression ratio for each file processed. Add more -v's to increase the verbosity.

-z, --compress

Force compression, even if invoked as bunzip2 or bzcat.

Name

cal

Synopsis

    cal [options] [[month] year]

With no arguments, print a calendar for the current month. Otherwise, print either a 12-month calendar (beginning with January) for the given year or a one-month calendar of the given month and year. month ranges from 1 to 12; year ranges from 1 to 9999.

GNU/Linux and Mac OS X Options

-j

Display Julian dates (days numbered 1 to 365, starting from January 1).

-y

Display entire year.

GNU/Linux Options

-1

Print a one-month calendar. This is the default.

-3

Print a three-month calendar: previous month, current month, and next month.

-m

Display Monday as the first day of the week.

-s

Display Sunday as the first day of the week. This is the default.

Examples

cal 12 2007
    cal 2007 > year_file

Name

calendar

Synopsis

    calendar [options]

Read your calendar file and display all lines that contain the current date. The calendar file is like a memo board. You create the file and add entries like the following:

    5/4     meeting with design group at 2 pm
    may 6   pick up anniversary card on way home

When you run calendar on May 4, the first line is displayed. calendar can be automated by using crontab or at, or by including it in your startup files, .profile or .login.

Solaris Option

-

Allow a privileged user to invoke calendar for all users, searching each user's login directory for a file named calendar. Entries that match are sent to a user via mail. This feature is intended for use via cron. It is not recommended in networked environments with large user bases.

Mac OS X Options

The Mac OS X version of calendar has a number of additional features not described here. See calendar(1) for more details.

-a

Same as the Solaris - option, above.

-A count

Print lines matching today's date, and for the next count days forward.

-B count

Print lines matching today's date, and for the previous count days backward.

-dMMDD[[YY]YY]

Print entries for the given date. The year may be specified using either two or four digits.

-f file

Use file instead of $HOME/calendar.

-F daynum

Day number daynum is the "Friday," i.e., the day before the weekend starts. The default is 5.

-l count

Look ahead count days and display the entries for that date also.

-tdd[.mm[.yyyy]]

For testing, set the date to the given value.

-w ndays

Add ndays to the number of "lookahead" days if and only if the originally provided day is a Friday. The default value is 2, which causes calendars for Fridays to also print entries for the following weekend.

-W count

Like -A, but do not include weekends in the count of days to look ahead.

Name

cancel

Synopsis

    cancel [options] [printer]

Cancel print requests made with lp. The request can be specified by its ID, by the printer on which it is currently printing, or by the username associated with the request (only privileged users can cancel another user's print requests). Use lpstat to determine either the id or the printer to cancel.

Common Options

id

Cancel print request id.

-u user

Cancel request associated with user.

GNU/Linux and Mac OS X Options

GNU/Linux and Mac OS X use CUPS, the Common Unix Printing System. See http://www.cups.org for more information. Besides the above options, the CUPS cancel command accepts the following:

-a

Remove all jobs from the given destination.

-h host

Treat host as the name of the print server. The default is localhost or the value of the CUPS_SERVER environment variable.

Name

cat

Synopsis

    cat [options] [files

]

Read one or more files and print them on standard output. Read standard input if no files are specified or if - is specified as one of the files; end input with EOF. Use the > shell operator to combine several files into a new file; >> appends files to an existing file.

Solaris and Mac OS X Options

-b

Like -n, but don't number blank lines.

-e

Print a $ to mark the end of each line. Must be used with -v.

-n

Number lines.

-s

Suppress messages about nonexistent files. (Note: on some systems, -s squeezes out extra blank lines.)

-t

Print each tab as ^I and each form feed as ^L. Must be used with -v.

-u

Print output as unbuffered (default is buffered in blocks or screen lines).

-v

Display control characters and other nonprinting characters.

GNU/Linux Options

-A, --show-all

Same as -vET.

-b, --number-nonblank

Number all nonblank output lines, starting with 1.

-e

Same as -vE.

-E, --show-ends

Print $ at the end of each line.

-n, --number

Number all output lines, starting with 1.

-s, --squeeze-blank

Squeeze down multiple blank lines to one blank line.

-t

Same as -vT.

-T, --show-tabs

Print TAB characters as ^I.

-u

Ignored; retained for Unix compatibility.

-v, --show-nonprinting

Display control and nonprinting characters, with the exception of LINEFEED and TAB.

Examples

cat ch1                   Display a file
    cat ch1 ch2 ch3 > all     Combine files
    cat note5 >> notes        Append to a file
    cat > temp1               Create file at terminal; end with EOF
    cat > temp2 << STOPCreate file at terminal; end with STOP

Name

cc

Synopsis

    cc [options]files

Compile one or more C source files (.c), assembler source files (.s), or preprocessed C source files (.i). cc automatically invokes the loader ld (unless -c is supplied). In some cases, cc generates an object file having a .o suffix and a corresponding root name. By default, output is placed in a.out. cc accepts additional system-specific options.

General Notes

On GNU/Linux and Mac OS X, cc is just a frontend for GCC, the GNU Compiler Collection.

Options for cc vary wildly across Unix systems. We have chosen here to document only those options that are commonly available. You will need to check your local documentation for complete information.

Usually, cc passes any unrecognized options to the loader, ld.

Solaris Notes

Solaris does not come with Sun's C compiler. If you purchase Sun's compiler, it will be installed in /opt/SUNWspro/bin. You should add that directory to your PATH. Solaris does make GCC available in /usr/sfw/bin, so if you installed the optional software, you may choose to use GCC instead.

The other tools that the C and C++ compilers need (the assembler and loader) are found in /usr/ccs/bin. You should add that directory to your PATH also.

Options

-c

Suppress loading and keep any object files that were produced.

-Dname[=def]

Supply a #define directive, defining name to be def or, if no def is given, the value 1.

-E

Run only the macro preprocessor, sending results to standard output.

-g

Generate more symbol-table information needed for debuggers.

-I dir

Search for include files in directory dir (in addition to standard locations). Supply a -I for each new dir to be searched.

-l name

Link source file with library files lib name .so or lib name .a.

-L dir

Like -I, but search dir for library archives.

-o file

Send object output to file instead of to a.out.

-O

Optimize object code (produced from .c or .i files). Some compilers accept an additional argument to -O specifying the optimization level.

-p

Generate benchmark code to count the times each routine is called. File mon.out is created, so prof can be used later to produce an execution profile.

-pg

Provide profile information for use with gprof.

-P

Run only the preprocessor and place the result in file .i.

-S

Compile (and optimize, if -O is supplied), but don't assemble or load; assembler output is placed in file .s.

-U name

Remove definition of name, as if through an #undef directive.

Example

Compile xpop.c and load it with the X libraries:

    cc -o xpop xpop.c -lXaw -lXmu -lXt -lX11

Name

cd

Synopsis

    cd [dir]

Change directory. cd is a built-in shell command. See Chapters 4 and 5.

Name

chgrp

Synopsis

    chgrp [options]newgroup files

Change the group of one or more files to newgroup. newgroup is either a group ID number or a group name located in /etc/group. You must own the file or be a privileged user to succeed with this command.

Common Options

-f, --quiet, --silent

Do not print error messages about files that can't be changed.

-h, --no-dereference

Change the group on symbolic links. Normally, chgrp acts on the file referenced by a symbolic link, not on the link itself.

-R, --recursive

Recursively descend through the directory, including subdirectories and symbolic links, setting the specified group ID as it proceeds. The last of -H, -L, and -P take effect when used with -R.

GNU/Linux and Mac OS X Options

-H

When used with -R, if a command-line argument is a symbolic link to a directory, recursively traverse the directory. In other words, follow the link.

-L

When used with -R, if any symbolic link points to a directory, recursively traverse the directory.

-P

When used with -R, do not follow any symbolic links. This is the default.

-v, --verbose

Verbosely describe ownership changes.

GNU/Linux Options

-c, --changes

Print information about files that are changed.

--dereference

Change the group of the file pointed to by a symbolic link, not the group of the symbolic link itself. This is the default.

--no-preserve-root

Do not treat the root directory, /, specially (the default).

--preserve-root

Do not operate recursively on /, the root directory.

--reference= filename

Change the group to that associated with filename. In this case, newgroup is not specified.

Name

chmod

Synopsis

    chmod [options]mode files

Change the access mode of one or more files. Only the owner of a file or a privileged user may change its mode. Create mode by concatenating the characters from who, opcode, and permission. who is optional (if omitted, default is a); choose only one opcode.

Common Options

-f, --quiet, --silent

Do not print error messages about files that cannot be changed.

-R, --recursive

Recursively descend through the directory, including subdirectories and symbolic links, setting the specified group ID as it proceeds. The last of -H, -L, and -P takes effect when used with -R.

GNU/Linux and Mac OS X Option

-v, --verbose

Verbosely describe ownership changes.

GNU/Linux Options

-c, --changes

Print information about files that are changed.

--no-preserve-root

Do not treat the root directory, /, specially (the default).

--preserve-root

Do not operate recursively on /, the root directory.

--reference= filename

Change the group to that associated with filename. In this case, newgroup is not specified.

Mac OS X Options

+a, +a#, -a, =a#

Parse, order, remove or rewrite ACL entries. See the chmod(1) manpage for more information.

-C

Exit nonzero if any files have ACLs in noncanonical order.

-E

Read new ACL information from standard input. If it parses correctly, use it to replace the existing ACL information.

-H

When used with -R, if a command-line argument is a symbolic link to a directory, recursively traverse the directory.

-i

Remove the "inherited" bit from all entries in the ACLs of the given files.

-I

Remove all "inherited" entries in the ACLs of the given files.

-L

When used with -R, if any symbolic link points to a directory, recursively traverse the directory.

-P

When used with -R, do not follow any symbolic links. This is the default.

Who

u

User

g

Group

o

Other

a

All (default)

Opcode

+

Add permission

-

Remove permission

=

Assign permission (and remove permission of the unspecified fields)

Permission

r

Read

w

Write

x

Execute

s

Set user (or group) ID

t

Sticky bit; save text mode (file) or prevent removal of files by nonowners (directory)

u

User's present permission

g

Group's present permission

o

Other's present permission

l

Mandatory locking

Alternatively, specify permissions by a three-digit sequence. The first digit designates owner permission; the second, group permission; and the third, others permission. Permissions are calculated by adding the following octal values:

4

Read

2

Write

1

Execute

Note: a fourth digit may precede this sequence. This digit assigns the following modes:

4

Set user ID on execution

2

Set group ID on execution or set mandatory locking

1

Sticky bit

Examples

Add execute-by-user permission to file:

    chmod u+x file

Either of the following assigns read-write-execute permission by owner (7), read-execute permission by group (5), and execute-only permission by others (1) to file

    chmod 751 file
    chmod u=rwx,g=rx,o=xfile

Any one of the following assigns read-only permission to file for everyone:

    chmod =r file
    chmod 444 file
    chmod a-wx,a+rfile

Set the user ID, assign read-write-execute permission by owner, and assign read-execute permission by group and others:

    chmod 4755 file

Name

chown

Synopsis

    chown [options] newowner[:newgroup]files

Change the ownership of one or more files to newowner. newowner is either a user ID number or a login name located in /etc/passwd. The optional newgroup is either a group ID number (GID) or a group name located in the /etc/group file. When newgroup is supplied, the behavior is to change the ownership of one or more files to newowner and make it belong to newgroup.

Note: some systems accept a period as well as the colon for separating newowner and newgroup. The colon is mandated by POSIX; the period is accepted for compatibility with older BSD systems.

Common Options

-f, --quiet, --silent

Do not print error messages about files that cannot be changed.

-h, --no-dereference

Change the owner on symbolic links. Normally, chown acts on the file referenced by a symbolic link, not on the link itself.

-R, --recursive

Recursively descend through the directory, including subdirectories and symbolic links, setting the specified group ID as it proceeds. The last of -H, -L, and -P takes effect when used with -R.

GNU/Linux and Mac OS X Options

-H

When used with -R, if a command-line argument is a symbolic link to a directory, recursively traverse the directory. In other words, follow the link.

-L

When used with -R, if any symbolic link points to a directory, recursively traverse the directory.

-P

When used with -R, do not follow any symbolic links. This is the default.

-v, --verbose

Verbosely describe ownership changes.

GNU/Linux Options

-c, --changes

Print information about files that are changed.

--dereference

Change the group of the file pointed to by a symbolic link, not the group of the symbolic link itself. This is the default.

--from= old-owner : old-group

Change the owner/group of the file to the new values only if the original values of the owner/group match old-owner and old-group. Either one may be omitted.

--no-preserve-root

Do not treat the root directory, /, specially (the default).

--preserve-root

Do not operate recursively on /, the root directory.

--reference= filename

Change the owner to that associated with filename. In this case, newowner is not specified.

Name

cksum

Synopsis

    cksum [files]

Calculate and print a cyclic redundancy check (CRC) sum for each file. The CRC algorithm is based on the polynomial used for Ethernet packets. For each file, cksum prints a line of the form:

              sum count filename

Here, sum is the CRC, count is the number of bytes in the file, and filename is the file's name. The name is omitted if standard input is used.

Mac OS X Option

-o algorithm

Use a historical algorithm for computing the checksum. Valid values are 1, for the historic BSD 16-bit sum checksum, 2, for the historic System V 32-bit sum checksum, and 3 for a 32-bit CRC that is different from the default algorithm.

Name

clear

Synopsis

    clear [term]

Clear the terminal display. The Solaris version allows an optional terminal name indicating the terminal's type. Normally this value is taken from the TERM environment variable.

Name

cmp

Synopsis

    cmp [options] file1 file2 [skip1 [skip2]]

Compare file1 with file2. Use standard input if file1 or file2 is -. (See also comm and diff.) skip1 and skip2 are optional offsets in the files at which the comparison is to start. The exit codes are as follows:

0

Files are identical.

1

Files are different.

2

Files are inaccessible.

Common Options

-l, --verbose

Print offsets and codes of all differing bytes.

-s, --quiet, --silent

Work silently; print nothing, but return exit codes.

GNU/Linux and Mac OS X Options

-b, --print-bytes

Print differing bytes.

-inum1[:num2], --ignore-initial=num1[:num2]

Ignore the first num1 bytes of input. With num2, skip num1 bytes from the first file and num2 bytes from the second file.

-nmax, --bytes=max

Read and compare no more than max bytes.

Example

Print a message if two files are the same (exit code is 0):

    cmp -s old new && echo 'no changes'

Name

comm

Synopsis

    comm [options]file1 file2

Compare lines common to the sorted files file1 and file2. Three-column output is produced: lines unique to file1, lines unique to file2, and lines common to both files. comm is similar to diff in that both commands compare two files. In addition, comm can be used like uniq; that is, comm selects duplicate or unique lines between two sorted files, whereas uniq selects duplicate or unique lines within the same sorted file.

Options

-

Read the standard input.

-1

Suppress printing of Column 1.

-2

Suppress printing of Column 2.

-3

Suppress printing of Column 3.

-12

Print only lines in Column 3 (lines common to file1 and file2).

-13

Print only lines in Column 2 (lines unique to file2).

-23

Print only lines in Column 1 (lines unique to file1).

Example

Compare two lists of top-10 movies and display items that appear in both lists:

    comm -12 shalit_top10 maltin_top10

Name

cp

Synopsis

    cp [options] file1 file2
cp [options]files
 directory

Copy file1 to file2, or copy one or more files to the same names under directory. If the destination is an existing file, the file is overwritten; if the destination is an existing directory, the file is copied into the directory (the directory is not overwritten). If one of the inputs is a directory, use the -r option.

Common Options

-f, --force

Remove existing files in the destination.

-i, --interactive

Prompt for confirmation (y for yes) before overwriting an existing file.

-p

Preserve the original file's permissions, ownership, and timestamps in the new file.

-r, -R, --recursive

Copy directories recursively. Solaris -R replicates named pipes, instead of reading from them.

GNU/Linux and Mac OS X Options

-H

When used with -R, if a command-line argument is a symbolic link to a directory, recursively traverse the directory.

-L, --dereference

When used with -R, if any symbolic link points to a directory, recursively traverse the directory.

-P

When used with -R, do not follow any symbolic links. This is the default.

-v, --verbose

Before copying , print the name of each file.

Solaris Option

-@

Copy extended attributes (ACLs, etc.) along with normal attributes.

GNU/Linux Options

-a, --archive

Preserve attributes of original files where possible. The same as -dpR.

-b

Back up files that would otherwise be overwritten.

--backup[=backup-method]

Like -b, but accepts an additional specification controlling how the backup copy should be made. Valid arguments are:

none, off

Never make numbered backups.

t, numbered

Always make numbered backups.

nil, existing

Make numbered backups of files that already have them; otherwise, make simple backups.

never, simple

Always make simple backups.

--copy-contents

Copy the contents of special files when doing a recursive copy.

-d

Same as --no-dereference --preserve=links.

-l, --link

Make hard links, not copies, of nondirectories.

--no-dereference

Do not dereference symbolic links; preserve hard link relationships between source and copy.

--no-preserve[=items]

Do not preserve the given items when copying. See --preserve for more information.

--parents

Preserve intermediate directories in source. The last argument must be the name of an existing directory. For example, the command:

cp --parents jphekman/book/ch1 newdir

copies the file jphekman/book/ch1 to the file newdir/jphekman/book/ch1, creating intermediate directories as necessary.

--preserve[=items]

Preserve the given items when copying. Possible items are all, link, mode, mode, ownership, and timestamps. Default is same as -p.

--remove-destination

Remove each destination file before trying to open it.

--reply= how

Control handling of queries about removing existing files. Valid values for how are yes, no, and query.

-s, --symbolic-link

Make symbolic links instead of copying. Source filenames must be absolute.

--sparse= when

Control handling of copying of sparse files. Valid values for when are auto, always, and never.

--strip-trailing-slashes

Remove trailing slashes from source file names.

-Sbackup-suffix, --suffix=backup-suffix

Set suffix to be appended to backup files. This may also be set with the SIMPLE_BACKUP_SUFFIX environment variable. The default is ~. You need to explicitly include a period if you want one before the suffix (for example, specify .bak, not bak).

--target-directory= dir

Copy all files into the directory dir.

-u, --update

Do not copy a file to an existing destination with the same or newer modification time.

-x, --one-file-system

Ignore subdirectories on other filesystems.

-Zcontext, --context=context

Set the security context of the file to context. SELinux only.

Mac OS X Options

-n

Do not overwrite an existing file.

Example

Copy two files to their parent directory (keep the same names):

    cp outline memo ..

Name

cpio

Synopsis

    cpio control_options [options]

Copy file archives in from, or out to, tape or disk, or to another location on the local machine. Each of the three control options, -i, -o, or -p accepts different options. (See also pax and tar.)

cpio -i [options] [patterns]

cpio --extract [options][patterns]

Copy in (extract) files whose names match selected patterns. Each pattern can include filename metacharacters from the Bourne shell. (Patterns should be quoted or escaped so that they are interpreted by cpio, not by the shell.) If no pattern is used, all files are copied in. During extraction, existing files are not overwritten by older versions in the archive (unless -u is specified).

cpio -o [options]

cpio --create [options]

Copy out a list of files whose names are given on the standard input.

cpio -p [options] directory

cpio --create [options] directory

Copy (pass) files to another directory on the same system. Destination pathnames are interpreted relative to the named directory.

Comparison of Valid Options

Options available to the -i, -o, and -p options are shown respectively in the first, second, and third row below. (The - is omitted for clarity.)

-i:   6   b B c C d E f   H I k   m M n r R s S t u v V z Z
    -o: 0 a A   B c C       F H     L   M O             v V z Z
    -p: 0 a           d           l L m   P   R       u v V

Common Options

-a, --reset-access-time

Reset access times of input files.

-A, --append

Append files to an archive (must use with -O or -F).

-b, --swap

Swap bytes and half-words to convert between big-endian and little-endian 32-bit integers. Words are four bytes.

-B

Block input or output using 5120 bytes per record (default is 512 bytes per record).

-c

Read or write header information as ASCII characters; useful when source and destination machines are different types.

-Cn, --io-size=n

Like -B, but block size can be any positive integer n.

-d, --make-directories

Create directories as needed.

-Efile, --pattern-file=file

Extract filenames listed in file from the archive.

-f, --nonmatching

Reverse the sense of copying; copy all files except those that match patterns.

-Htype, --format=type

Read or write header information according to format. Values for format are bar (bar format header and file, read-only, Solaris only), crc (ASCII header containing expanded device numbers), odc (ASCII header containing small device numbers), ustar (IEEE/P1003 Data Interchange Standard header), or tar (tar header). Solaris also allows CRC, TAR, and USTAR.

Mac OS X allows tar and ustar, as well as bcpio for the original binary cpio format, cpio for the original octal character (ASCII) cpio format, and sv4cpio for the System V Release 4 hexadecimal character format.

GNU/Linux allows tar and ustar, as well as bin for the original binary format, crc for the System V Release 4 format with an additional checksum, hpbin for the obsolete binary format used by the HP-UX cpio, hpodc for HP-UX's portable format, newc for the System V Release 4 portable (ASCII) format, and odc for the old POSIX.1 portable (ASCII) format.

-I file

Read file as an input archive. As with -F, GNU/Linux allows file to specify a remote archive.

-l, --link

Link files instead of copying. Can be used only with -p.

-L, --dereference

Follow symbolic links.

-m, --preserve-modification-time

Retain previous file-modification time.

-O file

Direct the output to file. As with -F, GNU/Linux allows file to specify a remote archive.

-r, --rename

Rename files interactively.

-RID, -ownerID

Reassign file ownership and group information of extracted files to the user whose login ID is ID (privileged users only). GNU/Linux allows ID to be of the form [ user][ sep group], i.e., a user or group name or ID or both. If both, sep may be a colon or period. Use a leading separator for just a group. For example: arnold:users, arnold, or :users.

-s, --swap-bytes

Swap bytes of each two-byte half-word.

-S, --swap-half-words

Swap half-words of each four-byte word.

--sparse

For -o and -p, write files that have large blocks of zeros as sparse files.

-t, --list

Print a table of contents of the input (create no files). When used with the -v option, resembles output of ls -l.

-u, --unconditional

Unconditional copy; old files can overwrite new ones.

-v, --verbose

Print a list of filenames processed.

-V, --dot

Print a dot for each file read or written (this shows cpio at work without cluttering the screen).

Solaris and GNU/Linux Option

-Mmsg, --message=msg

Print msg when switching media. Use variable %d in the message as a numeric ID for the next medium. -M is valid only with -I or -O.

Solaris and Mac OS X Option

-6

Process a PWB Unix Sixth Edition archive format file. Useful only with the -i option, mutually exclusive with -c and -H. Solaris and Mac OS X only.

GNU/Linux and Mac OS X Option

-Ffile, --file=file

Same as -O. The GNU/Linux version allows file to be of the form user @ host : file for accessing a remote archive. The user @ part is optional.

Solaris Options

-k

Skip corrupted file headers and I/O errors.

-P

Preserve ACLs. Can be used only with -p.

-@

With -o, include extended attributes in the archive. These attributes are stored as special files in the archive. These attributes may be restored upon extraction by using -@ with -i.

GNU/Linux Options

--blocksize= size

Set input or output blocksize to size × 512 bytes.

--force-local

Assume that file (provided by -F, -I, or -O) is a local file, even if it contains a colon (:) indicating a remote file.

-n, --numeric-uid-gid

When verbosely listing contents, show user ID and group ID numerically.

--no-absolute-filenames

Create all copied-in files relative to the current directory.

--no-preserve-owner

Make all copied files owned by yourself, instead of the owner of the original. Can be used only if you are a privileged user.

--only-verify-crc

For a CRC-format archive, verify the CRC of each file; don't actually copy the files in.

--quiet

Don't print the number of blocks copied.

--rsh-command= command

Tell mt to use command for accessing remote archives instead of rsh or ssh.

-0, --null

(Digit zero.) With -o or -p, read a list of filenames terminated with a NUL byte (all zeros) instead of a newline. This allows archiving files whose names contain newlines. GNU find can produce such a list of names.

Mac OS X Options

-z

Compress the archive using gzip.

-Z

Compress the archive using the old compress command.

Examples

Generate a list of old files using find; use list as input to cpio:

    find . -name "*.old" -print | cpio -ocBv > /dev/rmt/0

Restore from a tape drive all files whose name contains save (subdirectories are created if needed):

    cpio -icdv "*save*" < /dev/rmt/0

To move a directory tree:

    find . -depth -print | cpio -padml /mydir

Name

crontab

Synopsis

    crontab [file]
    crontab options [user]

View, install, or uninstall your current crontab file. On Mac OS X and GNU/Linux, a privileged user can run crontab for another user by supplying -u user. On Solaris, supply user following one of -e, -l, or -r.

A crontab file is a list of commands, one per line, that executes automatically at a given time. Numbers are supplied before each command to specify the execution time. The numbers appear in five fields, as follows:

Minute            0-59
    Hour               0-23
    Day of month          1-31
    Month            1-12
    Day of week           0-6, with 0 = Sunday

Use a comma between multiple values, a hyphen to indicate a range, and an asterisk to indicate all possible values. For example, assuming the crontab entries below:

    59 3 * * 5          find / -print | backup_program
    0 0 1,15 * *        echo "Timesheets due" | mailuser

The first command backs up the system files every Friday at 3:59 a.m., and the second command mails a reminder on the 1st and 15th of each month.

Common Options

-e

Edit the user's current crontab file (or create one).

-l

List the user's file in the crontab directory.

-r

Delete the user's file in the crontab directory.

GNU/Linux and Mac OS X Option

-u user

Indicate which user's crontab file will be acted upon.

Name

csh

Synopsis

    csh [options] [file] [arguments]

Command interpreter that uses syntax resembling C. csh (the C shell) executes commands from a terminal or a file. On Mac OS X and most GNU/Linux systems, /bin/csh is a link to tcsh, an enhanced version of the shell. Solaris supplies tcsh as a separate program. See also tcsh. See Chapter 5 for information on tcsh, including command-line options.

Name

csplit

Synopsis

    csplit [options]file arguments

Separate file into sections and place sections in files named xx00 through xx n (n < 100), breaking file at each pattern specified in arguments. A filename of - reads from standard input. See also split.

Common Options

-fprefix, --prefix=prefix

Name new files prefix 00 through prefixN (default is xx00 through xx n).

-k, --keep-files

Keep newly created files, even when an error occurs (which would normally remove these files). This is useful when you need to specify an arbitrarily large repeat argument, { n }, and you don't want the "out of range" error to remove the new files.

-nnum, --digits=num

Use output filenames with numbers num digits long. The default is 2.

-s, --quiet, --silent

Suppress all character counts.

GNU/Lnux Options

-bsuffix, --suffix-format=suffix

Append suffix to output filename. This option causes -n to be ignored. suffix must specify how to convert the binary integer to readable form by including one of the following: %d, %i, %u, %o, %x, or %X. The value of suffix determines the format for numbers as follows:

%d, %i

Signed decimal.

%u

Unsigned decimal.

%o

Octal.

%x, %X

Hexadecimal.

-q

Same as -s.

-z, --elide-empty-files

Do not create empty output files. However, number as if those files had been created.

Arguments

Any one or a combination of the following expressions. Arguments containing blanks or other special characters should be surrounded by single quotes.

/ expr /

Create file from the current line up to the line containing the regular expression expr. This argument takes an optional suffix of the form + n or - n, where n is the number of lines below or above expr.

% expr %

Same as / expr /, except that no file is created for lines previous to the line containing expr.

num

Create file from current line up to line number num.

{ n }

Repeat argument n times. May follow any of the above arguments. Files will split at instances of expr or in blocks of num lines. On GNU/Linux, if * is given instead of n, repeat argument until input is exhausted.

Examples

Create up to 20 chapter files from the file novel:

    csplit -k -f chap. novel '%CHAPTER%' '{20}'

Create up to 100 address files (xx00 through xx99), each four lines long, from a database named address_list:

    csplit -k address_list 4 {99}

Name

ctags

Synopsis

    ctags [options]files

Create a list of function and macro names that are defined in the specified C, Pascal, FORTRAN, yacc, or lex source files. Solaris ctags can also process C++ source files. The output list (named tags by default) contains lines of the form:

              name        file        context

where name is the function or macro name, file is the source file in which name is defined, and context is a search pattern that shows the line of code containing name. After the list of tags is created, you can invoke vi on any file and type:

    :set tags=tagsfile
    :tagname

This switches the vi editor to the source file associated with the name listed in tagsfile (which you specify with -f).

GNU/Linux systems often ship with the Exuberant ctags (see http://ctags.sourceforge.net). That version also understands C++, Java, Perl, Python, flex, and bison. The Exuberant ctags accepts many more options not listed here, see ctags(1) for more information. Of particular note is the -e option, which creates tag files usable with Emacs.

Options

-a

Append tag output to existing list of tags.

-B

context uses backward search patterns.

-d

Create tags for #define macros that don't take arguments (symbolic constants). Mac OS X only.

-f tagsfile

Place output in tagsfile (default is tags).

-F

context uses forward search patterns (default).

-t

Include C typedefs as tags.

-u

Update tags file to reflect new locations of functions (e.g., when functions are moved to a different source file). Old tags are deleted; new tags are appended.

-v

Produce a listing (index) of each function, source file, and page number (1 page = 64 lines). -v is intended to create a file for use with vgrind (a troff preprocessor for pretty-printing source code).

-w

Suppress warning messages.

-x

Produce a listing of each function, its line number, source file, and context.

Examples

Store tags in Taglist for all C programs:

    ctags -f Taglist *.c

Update tags and store in Newlist:

    ctags -u -f Newlist *.c

Name

curl

Synopsis

    curl [options] [URL ...]

curl retrieves files from the Internet, most often using FTP or HTTP. It has a plethora of options, making it difficult to use easily. One of curl's main strengths is that it may be used to automate file uploading. See also wget.

URLs: http://curl.haxx.se and ftp://ftp.sunet.se/pub/www/utilities/curl/.

Primary Options

For many of the options, using them multiple times toggles the behavior, turning a particular mode off if it was on or vice versa.

--connect-timeout seconds

Limit the connection phase to seconds seconds.

-Coffset, --continue-atoffset

Continue a previous file transfer at offset bytes. May be used with both downloads and uploads. Use -C - to have curl automatically determine the offset.

--create-dirs

When used with -o, create local directories as needed.

--disable-epsv

Do not use the EPSV FTP command for passive FTP transfers. Normally, curl tries the EPSV command before the PASV command.

-f, --fail

Fail silently upon HTTP server errors. Mainly useful for scripts.

--ftp-pasv

Use the FTP PASV command. This is the default.

-h, --help

Print a (relatively) brief help message.

-Kconfigfile, --configconfigfile

Use configfile as the configuration file, instead of the default $HOME/.curlrc. Use - to read configuration information from standard input.

--limit-rate speed

Limit transfers to speed. The default units is bytes per second, but you may use a trailing k or K for kilobytes, m or M for megabytes, or g or G for gigabytes. The -Y option overrides this option.

--max-filesize bytes

If curl can tell that a file exceeds bytes size, it will not download the file. Otherwise, this option has no effect.

-mseconds, --max-timeseconds

Do not exceed seconds for the entire operation. This prevents batch jobs from hanging due to slow networks or dead links.

-M, --manual

Display the full help text (over 2400 lines!), in the form of a manpage.

-ofile, --outputfile

Write the output to file instead of to standard output. See the manpage for more details. See also --create-dirs.

-q

When used as the first parameter, do not read $HOME/.curlrc.

-s, --silent

Silent mode; do not print a progress meter or any error messages.

-S, --show-error

With -s, do display error messages.

-Tfile, --upload-filefile

Upload file to the URL named on the command line. Use - to read standard input. The URL must end with a / if it's a directory, in which case curl will use file as the name of the file to create in the remote directory.

-uuser:password, --useruser:password

Supply user and password to the server for authentication.

-Uuser:password, --proxy-useruser:password

Supply user and password for proxy authentication.

--url URL

Retrieve URL. This option is mainly for use in a configuration file.

-v, --verbose

Be verbose during file retrieval. Mainly for debugging.

-V, --version

Print version and supported-feature information.

-xproxyhost[:port], --proxyproxyhost[:port]

Use the given host and optional port as the HTTP proxy. The default port is 1080.

-#, --progress-bar

Print progress information as a progress bar instead of as statistics.

See the manpage for a description of the other options.

Name

cut

Synopsis

    cut options [files]

Select a list of columns or fields from one or more files. Either -c or -f must be specified. list is a sequence of integers. Use a comma between separate values and a hyphen to specify a range (e.g., 1-10,15,20 or 50-). See also paste and join.

Common Options

-blist, --byteslist

This list specifies byte positions, not character positions. This is important when multibyte characters are used. With this option, lines should be 1023 bytes or less in size.

-clist, --characterslist

Cut the character positions identified in list.

-dc, --delimiterc

Use with -f to specify field delimiter as character c (default is tab); special characters (e.g., a space) must be quoted.

-flist, --fieldslist

Cut the fields identified in list.

-n

Do not split characters. When used with -b, cut doesn't split multibyte characters.

-s, --only-delimited

Use with -f to suppress lines without delimiters.

GNU/Linux Option

--output-delimiter= string

Use string as the output delimiter. By default, the output delimiter is the same as the input delimiter.

Examples

Extract usernames and real names from /etc/passwd:

    cut -d: -f1,5 /etc/passwd

Find out who is logged on, but list only login names:

    who | cut -d" " -f1

Cut characters in the fourth column of file, and paste them back as the first column in the same file. Send the results to standard output:

    cut -c4 file | paste -file

Name

date

Synopsis

    date [option] [+format]
    date [options] [string]

In the first form, print the current date and time, specifying an optional display format. In the second form, a privileged user can set the current date by supplying a numeric string. format can consist of literal text strings (blanks must be quoted) as well as field descriptors, whose values will appear as described below (the listing shows some logical groupings).

Format

%n

Insert a newline.

%t

Insert a tab.

%m

Month of year (01-12).

%d

Day of month (01-31).

%y

Last two digits of year (00-99).

%D

Date in %m/%d/%y format.

%b

Abbreviated month name.

%e

Day of month (1-31); pad single digits with a space.

%Y

Four-digit year (e.g., 1996).

%g

Week-based year within century (00-99).

%G

Week-based year, including the century (0000-9999).

%h

Same as %b.

%B

Full month name.

%H

Hour in 24-hour format (00-23).

%M

Minute (00-59).

%S

Second (00-61); 61 permits leap seconds and double leap seconds.

%R

Time in %H:%M format.

%T

Time in %H:%M:%S format.

%k

Hour (24-hour clock, 0-23); single digits are preceded by a space.

%l

Hour (12-hour clock, 1-12); single digits are preceded by a space.

%I

Hour in 12-hour format (01-12).

%p

String to indicate a.m. or p.m. (default is AM or PM).

%r

Time in %I:%M:%S %p format.

%a

Abbreviated weekday.

%A

Full weekday.

%w

Day of week (Sunday = 0).

%u

Weekday as a decimal number (1-7), Sunday = 1.

%U

Week number in year (00-53); start week on Sunday.

%W

Week number in year (00-53); start week on Monday.

%V

The ISO-8601 week number (01-53). In ISO-8601, weeks begin on a Monday, and week 1 of the year is the one that includes both January 4th and the first Thursday of the year. If the first Monday of January is the 2nd, 3rd, or 4th, the preceding days are part of the last week of the previous year.

%j

Julian day of year (001-366).

%Z

Time-zone name.

%x

Country-specific date format.

%X

Country-specific time format.

%c

Country-specific date and time format (default is %a %b %e %T %Z %Y; e.g., Sun Jul 10 06:00:59 EDT 2005).

%F

ISO 8601 date format, equivalent to %Y-%m-%d. Not on Solaris.

%N

The number of nanoseconds within the current second. GNU/Linux only.

%s

The date and time as seconds since the Epoch. Not on Solaris.

The actual formatting is done by the strftime (3) library routine. The country-specific formats depend on the setting of the LC_CTYPE, LC_TIME, and LC_MESSAGES (and on Solaris, NLSPATH) environment variables.

Common Option

-u, --utc, --universal

Display or set the time using Greenwich Mean Time (UTC).

Solaris Option

-a s . f

(Privileged user only.) Gradually adjust the system clock until it drifts s seconds away from what it thinks is the "current" time. (This allows continuous micro-adjustment of the clock while the system is running.) f is the fraction of seconds by which time drifts. By default, the clock speeds up; precede s by a -- to slow down.

GNU/Linux Options

-ddate, --datedate

Display date, which should be in quotes and may be in the format d days or m months d days to print a date in the future. Specify ago to print a date in the past. You may include formatting (see the previous section).

-fdatefile, --file=datefile

Like -d, but printed once for each line of datefile.

-I[timespec], --iso-8601[=timespec]

Display in ISO-8601 format. If specified, timespec can have one of the values date (for date only), hours, minutes, or seconds to get the indicated precision.

-rfile, --reference=file

Display the time file was last modified.

-R, --rfc-822

Display the date in RFC 822 format.

-sdate, --setdate

Set the date to date.

Mac OS X Options

-n

(Privileged user only.) Set the date on the local machine only; do not use timed(8) to set the time on all the machines in the local network.

-r seconds

Display the time represents by seconds seconds since the Epoch.

Strings for Setting the Date

A privileged user can set the date by supplying a numeric string. string consists of time, day, and year concatenated in one of three ways: time or [ day ]time or [ day ]time [ year ]. Note: don't type the brackets.

time

A two-digit hour and two-digit minute (HHMM ); HH uses 24-hour format.

day

A two-digit month and two-digit day of month (mmdd ); default is current day and month.

year

The year specified as either the full four digits or just the last two digits; default is current year.

Examples

Set the date to July 1 (0701), 4 a.m. (0400), 1999 (99):

    date 0701040099

Demonstrate the formatting capabilities:

    $ date +"Hello%t Date is %D %n%t Time is %T"
    Hello    Date is 06/26/05
             Time is 11:23:21

Name

dc

Synopsis

    dc [file]

An interactive desk calculator program that performs arbitrary-precision integer arithmetic (input may be taken from a file). Normally you don't run dc directly, since it's invoked by bc (see bc). dc provides a variety of one-character commands and operators that perform arithmetic; dc works like a Reverse Polish calculator; therefore, operators and commands follow the numbers they affect. Operators include + - / * % ^ (as in C, although ^ means exponentiation).

GNU/Linux and Mac OS X use the GNU version of dc that accepts a number of options and has additional commands; see dc(1) for the details. Some simple commands follow.

p

Print current result.

q

Quit dc.

c

Clear all values on the stack.

v

Take square root.

i

Change input base; similar to bc's ibase.

o

Change output base; similar to bc's obase.

k

Set scale factor (number of digits after decimal); similar to bc's scale.

!

Remainder of line is a Unix command.

Examples

$ dc
                     3 2 ^ p
                     Evaluate 3 squared, then print result
    9
    8 * p
                     Current value (9) times 8, then print result
    72
    47 - p
                     Subtract 47 from 72, then print result
    25
    v p
                     Square root of 25, then print result
    5
    2 o p
                     Display current result in base 2
    101

Note: spaces are not needed except between numbers.

Name

dd

Synopsis

    dd [option=value]

Make a copy of an input file (if=), or standard input if no named input file, using the specified conditions, and send the results to the output file (or standard output if of is not specified). Any number of options can be supplied, although if and of are the most common and are usually specified first. Because dd can handle arbitrary block sizes, it is useful when converting between raw physical devices.

Tip

Although dd provides options for ASCII/EBCDIC conversions, iconv is better suited to that task.

Options

bs= n

Set input and output block size to n bytes; this option supersedes ibs and obs.

cbs= n

Set the size of the conversion buffer (logical record length) to n bytes. Use only if the conversion flag is block or unblock, or one of the ASCII/EBCDIC conversions.

conv= flags

Convert the input according to one or more (comma-separated) flags listed below. The first nine flags are mutually exclusive. The next two are mutually exclusive with each other, as are the following two.

ascii

EBCDIC to ASCII.

asciib

EBCDIC to ASCII, using BSD-compatible conversions. Solaris only.

oldascii

EBCDIC to ASCII, using BSD-compatible conversions. Mac OS X only.

ebcdic

ASCII to EBCDIC.

ebcdicb

ASCII to EBCDIC, using BSD-compatible conversions. Solaris only.

oldebcdic

ASCII to EBCDIC, using BSD-compatible conversions. Mac OS X only.

ibm

ASCII to EBCDIC with IBM conventions.

ibmb

ASCII to EBCDIC with IBM conventions, using BSD-compatible conversions. Solaris only.

oldibm

ASCII to EBCDIC with IBM conventions, using BSD-compatible conversions. Mac OS X only.

block

Variable-length records (i.e., those terminated by a newline) to fixed-length records.

unblock

Fixed-length records to variable-length.

lcase

Uppercase to lowercase.

ucase

Lowercase to uppercase.

noerror

Continue processing when errors occur (up to five in a row).

notrunc

Do not truncate the output file. This preserves blocks in the output file that this invocation of dd did not write. Solaris only.

sparse

When input blocks consist only of zero bytes, try to seek on the output file, creating a sparse file. Mac OS X only.

swab

Swap all pairs of bytes.

sync

Pad input blocks to ibs.

count= n

Copy only n input blocks.

files= n

Copy n input files (e.g., from magnetic tape), then quit.

ibs= n

Set input block size to n bytes (default is 512).

if= file

Read input from file (default is standard input).

obs= n

Set output block size to n bytes (default is 512).

of= file

Write output to file (default is standard output).

iseek= n

Seek n blocks from start of input file (like skip but more efficient for disk file input). Solaris and Mac OS X only.

oseek= n

Same as seek. Solaris and Mac OS X only.

seek= n

Seek n blocks from start of output file.

skip= n

Skip n input blocks; useful with magnetic tape.

You can multiply size values (n) by a factor of 1024, 512, or 2 by appending the letters k, b, or w, respectively. You can use the letter x as a multiplication operator between two numbers.

Examples

Convert an input file to all lowercase:

    dd if=caps_file of=small_file conv=lcase

Retrieve variable-length data; write it as fixed-length to out:

data_retrieval_cmd | dd of=out conv=sync,block

Name

df

Synopsis

    df [options] [name]

Report the number of free disk blocks and inodes available on all mounted filesystems or on the given name. (On Solaris unmounted filesystems are checked with -F.) name can be a device name (e.g., /dev/dsk/0s9), the directory name of a mount point (e.g., /usr), a directory name, or a remote filesystem name (e.g., an NFS filesystem). Besides the options listed, there are additional options specific to different filesystem types or df modules.

Tip

On Solaris and Mac OS X, the default block size is the historic 512 bytes. On GNU/Linux it's 1024 bytes. Furthermore, the output format and option availability both vary wildly among the different systems, as well as between /usr/bin/df and /usr/xpg4/bin/df on Solaris. The end result is that it's hard to use df portably in shell scripts.

Common Options

-a, --all

Provide information about all filesystems, even ones usually marked in /etc/mnttab to be ignored.

-h, --human-readable

Like -k, but in a more "human readable" format, with one line per filesystem.

-i, --inodes

Solaris /usr/ucb/df, Mac OS X, GNU/Linux. Show the number of used and available inodes in a format similar to df -k.

-k, --kilobytes

Print allocation in kilobytes (typically used without other options). This option produces output in the format traditionally used by the BSD version of df.

-l, --local

Report only on local filesystems.

-o suboptions

Supply a comma-separated list of type -specific suboptions.

-P, --portability

Solaris /usr/xpg4/bin/df and Mac OS X: like -k, but use units of 512-byte blocks. On GNU/Linux, this still uses 1024-byte blocks, but the output format conforms to POSIX. (Set POSIXLY_CORRECT in the environment to force GNU df to use 512-byte blocks.)

GNU/Linux and Mac OS X Options

-H, --si

Like -h, but use base 10 for sizes, not base 2.

-m, --megabytes

Use 1048576-byte (1-Mbyte) blocks instead of the default. On Mac OS X, overrides the BLOCKSIZE environment variable.

-ttype, --type=type

Show only type filesystems. (Mac OS X in legacy mode.)

Solaris Options

-b

Print only the number of free kilobytes.

-e

Print only the number of free files.

-F type

Report on an unmounted filesystem specified by type. Available types can be seen in the file /etc/vfstab.

-g

Print the whole statvfs structure, overriding other print options.

-n

Print only the filesystem type name; with no other arguments, -n lists the types for all mounted filesystems.

-t

Report total allocated space as well as free space.

-v

/usr/bin/df only. Like -k, but the size unit is the smallest block size supported by each filesystem.

-V

Echo command line but do not execute command.

-Z

Display mounts in all visible zones. The default is to provide information only about filesystems mounted in the local zone.

GNU/Linux Options

-Bn, --block-size=n

Show space as n-byte blocks.

--no-sync

Show results without invoking sync first (i.e., without flushing the buffers). This is the default.

--sync

Invoke sync (flush buffers) before getting and showing sizes.

-T, --print-type

Print the type of each filesystem in addition to the sizes.

-xtype, --exclude-type=type

Show only filesystems that are not of type type.

Mac OS X Options

-b

Use 512-byte blocks instead of the default. Overrides the BLOCKSIZE environment variable.

-g

Use 1073741824-byte (1-Gigabyte) blocks instead of the default. Overrides the BLOCKSIZE environment variable.

-n

Print out saved information about each filesystem instead of requesting the information anew.

-T type

Prints statistics only for the given filesystem types.

Name

diff

Synopsis

    diff [options] [diroptions]file1 file2

diff reports lines that differ between file1 and file2. Output consists of lines of context from each file, with file1 text flagged by a < symbol and file2 text by a > symbol. Context lines are preceded by the ed command (a, c, or d) that converts file1 to file2. If one of the files is -, standard input is read. If one of the files is a directory, diff locates the filename in that directory corresponding to the other argument (e.g., diff my_dir junk is the same as diff my_dir/junk junk). If both arguments are directories, diff reports lines that differ between all pairs of files having equivalent names (e.g., olddir/program and newdir/program); in addition, diff lists filenames unique to one directory, as well as subdirectories common to both. See also cmp, comm, diff3, dircmp, and sdiff.

GNU/Linux and Mac OS X use GNU diff. See http://www.gnu.org/software/diffutils.

Common Options

Options -c, -C, -D, -e, -f, -h, -n, -u cannot be combined with each other (they are mutually exclusive).

-b, --ignore-space-change

Ignore repeating blanks and end-of-line blanks; treat successive blanks as one.

-c

Produce output in "context diff" format, with three lines of context.

-Cn, --context=n

Like -c, but produce n lines of context.

-Dsymbol, --ifdef=symbol

Merge file1 and file2 into a single file containing conditional C preprocessor directives (#ifdef). Defining symbol and then compiling yields file2; compiling without defining symbol yields file1.

-e, --ed

Produce a script of commands (a, c, d) to re-create file2 from file1 using the ed editor.

-f, --forward-ed

Produce a script to re-create file1 from file2; the script is in the opposite order, so it isn't useful to ed.

-h

Do a half-hearted (but hopefully faster) comparison; complex differences (e.g., long stretches of many changes) may not show up; -e and -f are disabled. GNU diff ignores this option.

-i, --ignore-case

Ignore uppercase and lowercase distinctions.

-n, --rcs

Like -f, but counts changed lines. rcsdiff works this way.

-t, --expand-tabs

Expand tabs in output lines; useful for preserving indentation changed by -c format.

-u

Produce output in "unified diff" format, with three lines of context.

-Un, --unified=n

Like -u, but produce n lines of context.

-w, --ignore-all-space

Like -b, but ignores all spaces and tabs; e.g., a + b is the same as a+b.

Diroptions (Common)

The diroptions are valid only when both file arguments are directories.

-l, --paginate

Long format; output is paginated by pr so that diff listings for each file begin on a new page; other comparisons are listed afterward.

-r, --recursive

Run diff recursively for files in common subdirectories.

-s, --report-identical-files

Report files that are identical.

-Sfilename, --starting-file=filename

Begin directory comparisons with file, skipping files whose names alphabetically precede file.

Options for GNU diff

-a, --text

Treat all files as text files. Useful for checking to see if binary files are identical.

--binary

Read and write data in binary mode.

-B, --ignore-blank-lines

Ignore blank lines in files.

-d, --minimal

To speed up comparison, ignore segments of numerous changes and output a smaller set of changes.

-E, --ignore-tab-expansion

Ignore differences due to expanding tabs.

--from-file= file

Compare file to each operand. file may be a directory.

-Fregexp, --show-function-line=regexp

For context and unified diffs, show the most recent line containing regexp before each block of changed lines.

--horizon-lines= n

In an attempt to find a more compact listing, keep n lines on both sides of the changed lines when performing the comparison.

-H, --speed-large-files

Speed output of large files by scanning for scattered small changes; long stretches with many changes may not show up.

--ignore-file-name-case

Ignore case in filenames during a recursive directory comparison.

-Iregexp, --ignore-matching-lines=regexp

Ignore lines in files that match the regular expression regexp.

-Llabel, --labellabel, --label=label

For context and unified diffs, print label in place of the filename being compared. The first such option applies to the first filename and the second option to the second filename.

--left-column

For two-column output (-y), show only the left column of common lines.

--no-ignore-file-name-case

Cancel the effect of a previous --ignore-file-name-case option.

-n, --normal

Produce a normal (default style) diff.

-N, --new-file

Treat nonexistent files as empty.

-p, --show-c-function

When handling files in C or C-like languages such as Java, show the function containing each block of changed lines. Assumes -c, but can also be used with a unified diff.

-q, --brief

Output only whether files differ.

--sdiff-merge-assist

Produce sdiff-style output. Used by GNU sdiff when invoking diff.

--strip-trailing-cr

Remove carriage return characters at the end of input lines.

--to-file= file

Compare each operand to file. file may be a directory.

--suppress-common-lines

For two-column output (-y), do not show common lines.

-T, --initial-tab

Insert initial tabs into output to line up tabs properly.

--unidirectional-new-file

When doing directory comparisons, if a file is found only in the second directory, pretend it is present but empty in the first one.

-v, --version

Print version number of diff.

-Wn, --width=n

For two-column output (-y), produce columns with a maximum width of n characters. Default is 130.

-xregexp, --exclude=regexp

Do not compare files in a directory whose names match regexp.

-Xfilename, --exclude-from=filename

Do not compare files in a directory whose names match patterns described in the file filename.

-y, --side-by-side

Produce two-column output.

GNU diff Group Format Options

When merging files, you may wish to have an if-then-else pattern of lines in the result: i.e., one group of lines used in one case, and another group in another case. The options below give you control over the format of such groups.

--changed-group-format= format

Use format for changed lines in if-then-else format.

--new-group-format= format

Use format for lines from the second file in if-then-else format.

--old-group-format= format

Use format for lines from the first file in if-then-else format.

--unchanged-group-format= format

Use format for lines common to both files in if-then-else format.

Within the format strings, special conversion specifiers give you control over the placement of the input text lines in the output.

%<

Lines from the first file, including the final newline. Each line is formatted according to the old line format.

%>

Lines from the second file, including the final newline. Each line is formatted according to the new line format.

%=

Lines common to both files, including the final newline. Each line is formatted according to the unchanged line format.

%%

A literal % character.

%c' C '

A literal character C. Useful for characters special to diff.

%c'\ O '

The character represented by O, which is a string of 1-3 octal digits.

printf-spec line-spec

A printf(3) format specification followed by a letter indicating a number to be printed. Valid specifications are %d, %o, %x, and %X. A field width and precision are allowed, as are the -, 0, and ' flags. The line-spec is one of the letters in the following list. Lowercase letters are used for lines in the first file; uppercase letters represent lines in the second file.

e, E

The number of the line just before the group.

f, F

The number of the first line in the group (same as e + 1).

l, L

The number of the last line of the group.

m, M

The number of the line just after the group (same as l + 1).

n, N

The number of lines in the group (L -F + 1).

%( A = B ? T : E )

Conditional substitution. A and B are either numbers or letters as just shown. If they are equal, the result is T, otherwise the result is E. See the Info documentation for GNU diff for more information.

GNU diff Line Format Options

Line format options give you control over the output of individual lines within line groups as specified by the line group options. The options are:

--line-format= format

Apply format to all input lines in if-then-else format.

--new-line-format= format

Apply format to input lines from the second file in if-then-else format.

--old-line-format= format

Apply format to input lines from the first file in if-then-else format.

--unchanged-line-format= format

Apply format to lines common to both files in if-then-else format.

Within the format strings, special conversion specifiers give you control over the placement of the input text lines in the output. The default line format is %l followed by a newline.

%l

The input line's contents, not including the newline.

%L

The input line's contents, including the trailing newline. If the input line did not have a newline, this format preserves that fact.

%%

A literal % character.

%c' C '

A literal character C. Useful for characters special to diff.

%c'\ O '

The character represented by O, which is a string of 1-3 octal digits.

printf-spec line-spec

The same as described earlier in this entry.

Name

diff3

Synopsis

    diff3 [options]file1 file2 file3

Compare three files and report the differences. No more than one of the files may be given as - (indicating that it is to be read from standard input). The output is displayed with the following codes:

= == =

All three files differ.

= == =1

file1 is different.

= == =2

file2 is different.

= == =3

file3 is different.

diff3 is also designed to merge changes in two differing files based on a common ancestor file (i.e., when two people have made their own set of changes to the same file). diff3 can find changes between the ancestor and one of the newer files and generate output that adds those differences to the other new file. Unmerged changes occur where both of the newer files differ from each other and at least one of them differs from the ancestor. Changes from the ancestor that are the same in both of the newer files are called merged changes. If all three files differ in the same place, it is called an overlapping change.

This scheme is used on the command line with the ancestor being file2, the second filename. Comparison is made between file2 and file3, with those differences then applied to file1.

Common Options

-e, --ed

Create an ed script to incorporate into file1 all differences between file2 and file3.

-E, --show-overlap

Same as -e, but mark with angle brackets any lines that differ between all three files.

-x, --overlap-only

Create an ed script to incorporate into file1 all differences between all three files.

-X

Same as -x, but mark with angle brackets any lines that differ between all three files.

-3, --easy-only

Create an ed script to incorporate into file1 differences between file1 and file3.

GNU/Linux and Mac OS X Options

-a, --text

Treat files as text.

-A, --show-all

Create an ed script to incorporate all changes, showing conflicts in bracketed format.

--diff-program= prog

Use prog to compare files instead of diff.

-i

Append the w (save) and q (quit) commands to ed script output.

-Llabel, --label=label

Use label to replace filename in output.

-m, --merge

Create file with changes merged (not an ed script).

-T, --initial-tab

To line tabs up properly in output, begin lines with a tab instead of two spaces.

-v, --version

Print version information and then exit.

Name

dig

Synopsis

    dig [@server] [options] [name] [type] [class] [query-options]
    dig @
                     server name type
                     dig-h

The dig command queries DNS servers; it is more flexible than the deprecated nslookup command. If you use it without any options or arguments, it searches for the root server. This entry documents the GNU/Linux and Mac OS X version of dig; the Solaris version is slightly different and resides in /usr/sbin. The standard arguments are:

server

The server to query. If no server is supplied, dig checks the name servers listed in /etc/resolv.conf. The address may be an IPv4 dotted address or an IPv6 colon-delimited address. It may also be a hostname, which dig will resolve (through the name servers in /etc/resolv.conf).

name

The domain name to look up.

type

The type of query to perform, such as A, ANY, MX, SIG, and so on. The default is A, but you may use any valid BIND9 query type.

Options

-b address

Set the source IP address for the query.

-c class

Set the class of query. The default value is IN (Internet), but you can choose HS for Hesiod or CH for CHAOSNET.

-f filename

Operate in batch mode, performing the queries in the file you specify.

-h

Print a command-line option summary and exit.

-k filename

Specify a TSIG key file; used for signed transactions. You can also use the -y key, although this is less secure.

-p portnumber

Choose the port number for the query. The default value is the standard DNS port, 53.

-t type

Set the type of query, as with the query argument. The default value is A, but you may use any valid BIND9 query.

-x addr

Perform a reverse lookup, specifying an IPv4 or IPv6 address. You don't need the name, class, or type arguments if you use -x.

-y keyname : keyvalue

Enter the actual key name and value when conducting a signed transaction. Because the key and value can be seen in the output of ps, this is not recommended for use on multiuser systems; use -k instead.

Query Options

There are a large number of query options for dig. Each query option is preceded by +, and many have an opposite version beginning with no. For example, the tcp flag is passed as +tcp, and negated with +notcp. Because there are so many options, only a few are discussed here. For greater detail, see the dig(1) manpage.

+tcp, +notcp

Use (or do not use) the TCP protocol instead of the default UDP.

+domain= searchdomain

Perform a search in the domain specified; this is equivalent to using the +search option and having searchdomain as the sole entry in the search list or domain directive of /etc/resolv.conf.

+search, +nosearch

Use (or don't use) the search list provided in /etc/resolv.conf. The default is not to use the search list.

+time= T

Timeout for queries, in seconds. The default is five, and the minimum is one.

+tries= N

The number of times to retry UDP queries. The default is three, and the minimum is one.

Name

dirname

Synopsis

    dirname pathname

Print pathname, excluding last level. Useful for stripping the actual filename from a pathname. See also basename.

Name

dos2unix

Synopsis

    dos2unix [options]dosfile unixfile

Solaris and GNU/Linux only. Convert files using the DOS extended character set to their ISO standard counterparts. If dosfile and unixfile are the same, the file is overwritten after the conversion is done. See also unix2dos.

Solaris Options

-ascii

Remove extra carriage returns and convert (remove) DOS end-of-file characters for use under Unix.

-iso

Same as the default action.

-7

Convert 8-bit DOS graphics characters to space characters.

GNU/Linux Options

-cmode, --convmodemode

Set the conversion mode to mode. Possible values are ASCII, 7bit, ISO, and Mac. The default is ASCII. This emulates the Solaris version of dos2unix.

-h, --help

Print a command-line summary and exit.

-k, --keepdate

Make the modification date of the output file be the same as that of the input file.

-ninfile outfile ..., --newfileinfile outfile ...

New file mode. Filenames must be provided in pairs: the first one is the input file, the second is the output file.

-ofile ..., --oldfilefile ...

Old file mode. Each input file in converted in place. This is the default.

-q, --quiet

Do not print any warnings or messages.

-V, --version

Print version information and exit.

Name

du

Synopsis

    du [options] [directories]

Print disk usage, i.e., the number of blocks used by each named directory and its subdirectories (default is current directory).

Tip

On Solaris and Mac OS X, the default block size is the historic 512 bytes. On GNU/Linux it's 1024 bytes. Furthermore, the option availability and meanings vary wildly among the different systems, as well as between /usr/bin/du and /usr/xpg4/bin/du on Solaris. The end result is that it's hard to use du portably in shell scripts, although du -k seems to be a universal least common denominator.

Common Options

-a, --all

Print usage for all files, not just subdirectories.

-h, --human-readable

Print sizes in human-readable format.

-k, --kilobytes

Print information in units of kilobytes.

-L, --dereference

For symbolic links, process the file or directory to which the link refers, not the link itself.

-s, --summarize

Print only the grand total for each named directory.

-x, --one-file-system

Restrict file size evaluations to files on the same filesystem as the command-line file parameter. Not available for Solaris /usr/bin/du.

Solaris Options

-d

Do not cross filesystem boundaries. /usr/bin/du only.

-H

When a symbolic link named on the command line refers to a directory, process the linked-to directory instead of the link itself.

-o

Do not add child-directory statistics to the parent directory's total. No effect if -s is also used. /usr/bin/du only.

-r

Print a "cannot open" message if a file or directory is inaccessible.

GNU/Linux Options

--apparent-size

Print the apparent size, not actual disk usage. This may be larger than actual disk usage due to holes in sparse files, as well as other factors.

-b, --bytes

Print sizes in bytes.

-B, --block-size=size

Use a block size of size bytes.

-c, --total

In addition to normal output, print grand total of all arguments.

-D, --dereference-args

Follow symbolic links, but only if they are command-line arguments.

--exclude= pattern

Exclude files that match pattern.

-H

Like --si, but also evokes a warning. For standards-compliance, this option will eventually become the same as -D.

-l, --count-links

Count the size of all files, whether or not they have already appeared (i.e., via a hard link).

-P, --no-dereference

Do not follow any symbolic links. This is the default.

--max-depth= num

Report sizes for directories only down to num levels below the starting point (which is level 0).

-m, --megabytes

Print sizes in megabytes.

--si

Like -h, but show as power of 1000 rather than 1024.

-S, --separate-dirs

Do not include the sizes of subdirectories when totaling the size of parent directories.

-X, --exclude-from=file

Exclude files that match any pattern in file.

-0, --null

End each output line with a binary zero (NUL) character, instead of a newline.

Mac OS X Options

-c

Print a grand total.

-d depth

Descend only depth directories deep.

-H

When a symbolic link named on the command line refers to a directory, process the linked-to directory instead of the link itself.

-I mask

Ignore files and directories that match mask.

-P

Do not follow any symbolic links. This is the default.

-r

Print a "cannot open" message if a file or directory is inaccessible.

Name

echo

Synopsis

    echo [option] [string]

Echo arguments to standard output . Often used for producing prompts from shell scripts. This is the echo command in the filesystem, not the one built into the shells (see Chapters 4 and 5).

Although echo is conceptually the simplest of all Unix commands, using it in practice is complicated, because of portability and version differences. (Consider using printf instead.) The following sections summarize the differences.

Options

-e

Always interpret escape sequences in argument strings.

-E

Never interpret escape sequences in argument strings.

-n

Do not print the final terminating newline.

Version Differences

Solaris /usr/bin/echo

Does not accept any options. Interprets the escape sequences described next.

Solaris /usr/ucb/echo

Accepts the -n option if it's first. Does not interpret escape sequences.

Mac OS X /bin/echo

Accepts the -n option if it's first, and interprets only the \c escape sequence.

GNU/Linux /bin/echo

Accepts the -e, -E, and -n options, and the options --help and --version.

Bourne shell echo

Does not accept the -n option. Interprets the escape sequences described next, except \a.

C shell echo

Accepts the -n option if it's first. Does not interpret escape sequences. In tcsh, the echo_style shell variable controls emulation of BSD and/or System V echo options and escape sequences.

Korn shell echo

Searches $PATH and behaves like the first version of echo that it finds.

Bash echo

Accepts the -e, -E, and -n options.

Escape Sequences

\a

Alert (ASCII BEL). (Not in /bin/sh's echo.)

\b

Backspace.

\c

Suppress the terminating newline (same as -n).

\E

The ASCII ESCAPE character. Bash built-in echo only.

\f

Formfeed.

\n

Newline.

\r

Carriage return.

\t

Tab character.

\v

Vertical-tab character.

\\

Backslash.

\0 nnn

ASCII character represented by octal number nnn, where nnn is 1, 2, or 3 digits and is preceded by a 0.

Examples

echo "testing printer" | lp
    echo "TITLE\nTITLE" > file ; cat doc1 doc2 >> file
    echo "Warning: ringing bell \07"

Name

ed

Synopsis

    ed [options] [file]

ed is the standard text editor. If the named file does not exist, ed creates it; otherwise, the existing file is opened for editing. As a line editor, ed is generally no longer used because vi and ex have superseded it. However, it can be useful from a slow dial-in connection or over an intercontinental ssh session when using a screen editor is painful. Some utilities, such as diff, continue to make use of ed command syntax.

URL: http://www.gnu.org/fun/jokes/ed.msg.html.

Common Options

-p string

Set string as the prompt for commands (default is *). The P command turns the prompt display on and off.

-s

Suppress character counts, diagnostics, and the ! prompt for shell commands. Earlier versions of ed used plain -; this is still accepted.

System Specific Options

-C

Same as -x, but assume file began in encrypted form. Solaris only.

-G

Forces backwards compatibility. This affects the commands G, V, f, l, m, t, and !!. GNU/Linux only.

-x

Supply a key to encrypt or decrypt file using crypt. Solaris and Mac OS X only.

Name

egrep

Synopsis

    egrep [options] [regexp] [files]

Search one or more files for lines that match a regular expression regexp. egrep doesn't support the metacharacters \(, \), \ n, \<, \>, but does support the other metacharacters, as well as the extended set +, ?, |, and (). Remember to enclose these characters in quotes. Regular expressions are described in Chapter 7. Exit status is 0 if any lines match, 1 if not, and 2 for errors. See also grep and fgrep.

Solaris /usr/bin/egrep does not support \{, or \}. Mac OS X and GNU/Linux use GNU egrep.

Common Options

-c, --count

Print only a count of matched lines.

-eregexp, --regexp=regexp

Use this if regexp begins with -.

-ffile, --file=file

Take expression from file. Multiple expressions may be provided, one per line, in which case any of them may match.

-i, --ignore-case

Ignore uppercase and lowercase distinctions.

-h, --no-filename

Do not print the names of matching files, just the matched lines.

-l, --files-with-matches

List filenames but not matched lines.

-n, --line-number

Print lines and their line numbers.

-s, --no-messages

Silent mode: print only error messages, and return the exit status.

-v --invert-match

Print all lines that don't match regexp.

-x, --line-regexp

Select only those matches that exactly match the whole line. (Only /usr/xpg4/bin/egrep on Solaris, not /usr/bin/egrep.)

GNU grep, egrep, and fgrep Options

-a, --text

Treat a binary file as text. Same as --binary-files=text.

-Acount, --after-context=count

Print count lines of trailing context. This places a -- between contiguous groups of matches.

-b, --byte-offset

Before each output line, print the byte offset within the file.

--binary-files= type

egrep examines the first few bytes of a file. If this examination indicates that the file is binary, this option tells egrep what to do. Values for type are: binary, which gives the default behavior of printing a message that the file does (or does not) match; without-match to indicate that the file does not match, or text, which causes egrep to attempt to print the matching line.

-Bcount, --before-context=count

Print count lines of leading context. This places a -- between contiguous groups of matches.

--color[=when], --colour[=when]

Highlight matching text with color as provided by the GREP_COLOR environment variable. when may be always, auto, or never.

-Ccount, --context=count

Print count lines of output context. This places a -- between contiguous groups of matches.

-daction, --directories=action

Use action to process directories. Possible values are: read, which means to read the directory as if it was a file; skip, to skip processing the directory; or recurse, to enter it and process its files recursively (equivalent to -r).

-Daction, --devices=action

Use action to process device, FIFO, or socket special files. Possible values are: read, which means to read the file; and skip, to skip processing the file.

--exclude= pattern

During recursive directory processing, skip files whose names match pattern.

-E, --extended-regexp

Treat the search pattern as an Extended Regular Expression (ERE). See Chapter 7. This is the default for egrep.

-F, --fixed-strings

Treat the regexp argument as a list of fixed strings, separated by newlines. Any of the strings may match. This is the default for fgrep.

-G, --basic-regexp

Treat the search pattern as an Basic Regular Expression (BRE). See Chapter 7. This is the default for grep.

-H, --with-filename

Always print the name of matching files. (Normally, grep, egrep, and fgrep print the name of the matching file only if more than one filename is listed on the command line.)

--include= pattern

During recursive directory processing, only process files whose names match pattern.

-I

Same as --binary-files=without-match.

-L, --files-without-match

The inverse of -l: print just the names of files that do not match regexp.

-mcount, --max-count=count

Stop reading each input file after matching count lines. With -v, stop after count nonmatching lines.

--mmap

Use the mmap(2) system call for reading input, if possible. This can provide a performance improvement.

--label= label

Use label for the name of standard input instead of (standard input).

--line-buffered

Use line buffering. This may decrease performance.

-o, --only-matching

Display only the part of the line that matches regexp.

-P, --perl-regexp

Treat regexp as a Perl regular expression. This option is experimental, don't use it for production shell scripts.

-q, --quiet, --silent

Be quiet; do not produce any output. egrep exits immediately with a zero status if any match is found, even if there were previous errors. See also the -s option.

-r, -R, --recursive

When given a directory, process it recursively, searching the contained files and directories for matches.

-u, --unix-byte-offsets

For MS-DOS and MS-Windows platforms, report byte offsets as if reading a Unix text file. In other words, ignore the carriage return characters. Must be used together with -b.

-U, --binary

For MS-DOS and MS-Windows platforms, force egrep to treat the file as binary data. This prevents the default automatic removal of carriage return characters on that platform.

-V, --version

Print version information to standard output and exit.

-w, --word-regexp

Perform a word match on regexp. The match must be at the beginning of a line or preceded by a non-word-constituent character. The matching text must also be either at the end of the line or be followed by a non-word-constituent character. Word-constituent characters are letters, digits, and the underscore.

-y

An obsolete synonym for -i.

-Z, --null

Use a zero byte (ASCII NUL) instead of the colon that usually follows a filename. Intended for use with -l to produce an unambiguous list of filenames that can be processed by programs like xargs -0 or sort -z. This allows easy processing of filenames that contain unusual characters, such as newlines.

Examples

Search for occurrences of Victor or Victoria in file :

    egrep 'Victor(ia)?' file
    egrep '(Victor|Victoria)'file

Find and print strings such as old.doc1 or new.doc2 in files, and include their line numbers:

    egrep -n '(old|new)\.doc?' files

Name

eject

Synopsis

    eject [options] [media]

Solaris and GNU/Linux only. Eject removable media, such as a floppy disk or CD-ROM. On Solaris, necessary for media being managed by vold, or for media without an eject button, such as the floppy drives on some Sun SPARC systems. media is either a device name or a nickname, such as floppy or cdrom.

With volume management available, eject unmounts any filesystems mounted on the named media. In this case, it also displays a pop-up dialog if a window system is running. Without volume management, it simply sends an "eject" command to the given device.

On GNU/Linux, the default device is cdrom. A device name or mount point may be supplied.

Solaris Options

-d

Print the name of the default device to be ejected.

-f

When volume management is not in effect, force the eject, even if the device is busy.

-n

Display the list of nicknames and their corresponding real devices.

-p

Do not use a windowing pop-up dialog.

-q

Query to see if the device has media. Use the exit status to determine the answer.

GNU/Linux Options

-aon|1|off|0, --autoon|1|off|0

Set the auto-eject mode to on or off (equivalent to 1 or 0). If auto-eject mode is on, the device is ejected when closed or unmounted.

-cslotnumber, --changerslotslotnumber

If using a CD-ROM changer, select a CD from one of the slots. Slots are enumerated starting with 0, and the CD-ROM drive must not be playing music or mounted to read data.

-d, --default

List the default device name rather than doing anything.

-f, --floppy

Use floppy commands to eject the drive. Normally, the system will try all methods (CD-ROM, SCSI, floppy, tape) to eject.

-h, --help

Display help information.

-n, --noop

Do not perform any actions; merely display the actions that would be performed.

-p, --proc

Use the mounted files listed in /proc/mounts rather than the ones in /etc/mtab.

-q, --tape

Use tape commands to eject the drive. Normally, the system will try all methods (CD-ROM, SCSI, floppy, tape) to eject.

-r, --cdrom

Use CD-ROM commands to eject the drive. Normally, the system will try all methods (CD-ROM, SCSI, floppy, tape) to eject.

-s, --scsi

Use SCSI commands to eject the drive. Normally, the system will try all methods (CD-ROM, SCSI, floppy, tape) to eject.

-t, --trayclose

Close the CD-ROM drive. Not all drives will respond to this command.

-v, --verbose

Verbose mode: display additional information about actions.

-V, --version

Display version information, then quit.

-xspeed, --cdspeedspeed

Set the speed multiplier for the CD-ROM to an integer, usually a power of 2. Not all devices support this command. Setting the speed to 0 indicates that the drive should operate at its maximum speed.

Name

emacs

Synopsis

    emacs [options] [files]

A text editor and all-purpose work environment. For more information, see Chapter 8.

Name

env

Synopsis

    env [options] [variable=value ... ] [command]

Display the current environment or, if environment variables are specified, set them to a new value and display the modified environment. If command is specified, execute it under the modified environment.

Options

-, -i, --ignore-environment

Ignore current environment entirely.

-uname, --unsetname

Unset the specified variable.

Name

etags

Synopsis

    etags [options]files

Create a list of function and macro names defined in a programming source file. etags generates tags for use by emacs. (ctags produces an equivalent tags file for use with vi.) More than one file may be specified. etags understands many programming languages, including Ada, bison, C++, C, Cobol, Emacs Lisp/Common Lisp, Erlang, flex, Fortran, Java, Perl, Python, Scheme, TeX, and yacc. The output list (named TAGS by default) contains lines of the form:

              name     file     context

where name is the function or macro name, file is the source file in which name is defined, and context is a search pattern that shows the line of code containing name. After the list of tags is created, you can invoke Emacs on any file and type:

    M-x visit-tags-table

You will be prompted for the name of the tag table; the default is TAGS. To switch to the source file associated with the name listed in tagsfile, type:

    M-x find-tag

You will be prompted for the tag you would like Emacs to search for.

This entry documents the etags program shipped with GNU Emacs. A related ctags program is also included for generating a tags file for vi. Some of the options below only work with GNU ctags. The ctags entry in this chapter documents a different version of ctags, the Exuberant ctags.

Options

-a, --append

Append tag output to existing list of tags.

-C, --c++

Expect .c and .h files to contain C++, not C, code.

-d, --defines

Include tag entries for C preprocessor definitions.

--declarations

Create tags for function declarations and extern variables for C and similar languages.

-D, --no-defines

Do not include tag entries for C preprocessor definitions.

-g, --globals

In C, C++, Objective C, Java, and Perl, create tags for global variables. This is the default for etags.

-G, --no-globals

In C, C++, Objective C, Java, and Perl, do not create tags for global variables. This is the default for ctags.

-h, -H, --help

Print usage information.

-ifile, --include=file

Add a note to the tags file that file should be consulted in addition to the normal input file.

--ignore-case-regex= regexp

Similar to --regex, except that case is not significant.

-I, --ignore-indentation

Do not assume that a closing brace in the first column ends a function or structure definition for C and C++.

-llanguage, --language=language

Consider the files that follow this option to be written in language. Use the -h option for a list of languages and their default filename extensions.

-m, --members

Create tags for members of structs and similar constructs in C++, Objective C and Java.

-M, --no-members

Do not create tags for members of structs and similar constructs in C++, Objective C and Java. This is the default.

-ofile, --output=file

Write to file.

-rregexp, --regex=regexp

Include a tag for each line that matches regexp in the files following this option.

-R, --noregex

Don't include tags based on regular-expression matching for the files that follow this option.

-V, --version

Print the version number.

GNU ctags Options

-B, --backward-search

Create tags files using the ? backward search character, instead of the default / forward search character.

-t, --typedefs

Include typedefs in C. etags does this by default.

-T, --typedefs-and-c++

Include tags for typedefs, struct, enum, and union tags, and C++ member functions. etags does this by default.

-u, --update

Update the entries just for the named files, leaving other entries in place. It is likely to be faster to simply rebuild the entire tags file.

-v, --vgrind

Do not create a tags file. Instead, write the index in vgrind format. This is a rather obsolete option.

-w, --no-warn

Do not warn about duplicate entries.

-x, --cxref

Do not create a tags file. Instead, write a cross reference in cxref format to standard output. This option is also of only marginal use, as there is no standard cross-platform cxref program.

Name

evim

Synopsis

    evim [options] [file ...]
    eview [options] [file ...]

evim starts the graphical version of vim in "easy mode," whereby editing uses point-and-click. This makes vim feel like the very simple text editor found on some non-Unix operating systems. It should be used only by people who can't handle regular vim. eview is the same as evim but it starts up in read-only mode (equivalent to the -R option). See also vim and Chapter 9.

Solaris supplies evim in /opt/sfw/bin, and evim is installed by default if you build vim from source. On GNU/Linux, you can make a symbolic link named evim to gvim and it will work. On Mac OS X, you can link regular vim to evim, and it will work inside a terminal window. To access the ex prompt (so that you can exit, for example), type CTRL-O :.

URL: http://www.vim.org.

Name

ex

Synopsis

    ex [options]files

A line-oriented text editor; a superset of ed and the root of vi. See Chapter 9 for more information.

Name

expand

Synopsis

    expand [options] [files]

Expand tab characters into appropriate number of spaces. expand reads the named files or standard input if no files are provided. See also unexpand.

Options

- n

Set the tabstops every n characters. The default is 8.

- tablist

Interpret tabs according to tablist, a space- or comma-separated list of numbers in ascending order, that describe the "tabstops" for the input data.

-i, --initial

Convert tabs only at the beginning of lines.

-ttablist, --tabstablist

Interpret tabs according to tablist, a space- or comma-separated list of numbers in ascending order, that describe the "tabstops" for the input data.

Example

Cut columns 10-12 of the input data, even when tabs are used:

    expand data | cut -c 10-12 > data.col2

Name

expr

Synopsis

    expr arg1 operator arg2 [ operator arg3 ... ]

Evaluate arguments as expressions and print the result. Strings can be compared and searched. Arguments and operators must be separated by spaces. In most cases, an argument is an integer, typed literally or represented by a shell variable. There are three types of operators: arithmetic, relational, and logical. Exit status for expr is 0 (expression is nonzero and nonnull), 1 (expression is 0 or null), or 2 (expression is invalid).

expr is typically used in shell scripts to perform simple arithmetic, such as addition or subtraction. It is made obsolete in modern shells that have built-in arithmetic capabilities.

Arithmetic Operators

Use the following operators to produce mathematical expressions whose results are printed:

+

Add arg2 to arg1.

-

Subtract arg2 from arg1.

*

Multiply the arguments.

/

Divide arg1 by arg2.

%

Take the remainder when arg1 is divided by arg2.

Addition and subtraction are evaluated last, unless they are grouped inside parentheses. The symbols *, (, and ) have meaning to the shell, so they must be escaped (preceded by a backslash or enclosed in single or double quotes).

Relational Operators

Use relational operators to compare two arguments. Arguments can also be words, in which case comparisons assume a < z and A < Z. If the comparison statement is true, the result is 1; if false, the result is 0. Symbols < and > must be escaped.

=

Are the arguments equal?

!=

Are the arguments different?

>

Is arg1 greater than arg2 ?

>=

Is arg1 greater than or equal to arg2 ?

<

Is arg1 less than arg2 ?

<=

Is arg1 less than or equal to arg2 ?

Logical Operators

Use logical operators to compare two arguments. Depending on the values, the result can be arg1 (or some portion of it), arg2, or 0. Symbols | and & must be escaped.

|

Logical OR; if arg1 has a nonzero (and nonnull) value, the result is arg1; otherwise, the result is arg2.

&

Logical AND; if both arg1 and arg2 have a nonzero (and nonnull) value, the result is arg1; otherwise, the result is 0.

:

Similar to grep; arg2 is a pattern to search for in arg1. arg2 must be a regular expression in this case. If the arg2 pattern is enclosed in \( \), the result is the portion of arg1 that matches; otherwise, the result is simply the number of characters that match. By default, a pattern match always applies to the beginning of the first argument (the search string implicitly begins with a ^). To match other parts of the string, start the search string with .*.

Keywords

The GNU/Linux version accepts additional keyword commands. Some Unix versions of expr also accept the index, length, and substr keywords.

+ token

Treat token as a string, even if it would normally be a keyword or an operator.

index string character-list

Return the first position in string that matches the first possible character in character-list. Continue through character-list until a match is found, or return 0.

length string

Return the length of string.

match string regex

Same as string : regex.

substr string start length

Return a section of string, beginning with start, with a maximum length of length characters. Return null when given a negative or nonnumeric start or length.

Examples

Division happens first; result is 10:

    expr 5 + 10 / 2

Addition happens first; result is 7 (truncated from 7.5):

    expr \( 5 + 10 \) / 2

Add 1 to variable i; this is how variables are incremented in shell scripts:

    i='expr $i + 1'

Print 1 (true) if variable a is the string "hello":

    expr $a = hello

Print 1 (true) if variable b plus 5 equals 10 or more:

    expr $b + 5 \>= 10

In the following examples, variable p is the string "version.100". This command prints the number of characters in p :

    expr $p : '.*'         Result is 11

Match all characters and print them:

    expr $p : '\(.*\)'     Result is "version.100"

Print the number of lowercase letters at the beginning of p :

    expr $p : '[a-z]*'     Result is 7

Match the lowercase letters at the beginning of p :

    expr $p : '\([a-z]*\)' Result is "version"

Truncate $x if it contains five or more characters; if not, just print $x. (Logical OR uses the second argument when the first one is 0 or null; i.e., when the match fails.) Double-quoting is a good idea, in case $x contains whitespace characters:

    expr "$x" : '\(.....\)' \| "$x"

In a shell script, rename files to their first five letters:

    mv "$x" 'expr "$x" : '\(.....\)' \| "$x"'

(To avoid overwriting files with similar names, use mv -i.)

Name

factor

Synopsis

    factor [num]

Solaris and GNU/Linux only. Produce the prime factors of num or read numbers from input.

Name

false

Synopsis

    false

A do-nothing command that returns an unsuccessful (nonzero) exit status. Normally used in Bourne shell scripts. See also true.

false is built into most modern shells.

Examples

# This loop never executes
    while false
    do
            commands
    done

    # This loop executes forever
    until false
    do
            commands
    done

Name

fdformat

Synopsis

    fdformat [options] [device]

Solaris and GNU/Linux only.[*] Format floppy disks and PCMCIA memory cards. device is the name of the appropriate device to format, and varies considerably based on the density of the media, the capability of the disk drive, and—on Solaris—whether or not volume management is in effect.

Solaris Options

-b label

Apply the label to the media. SunOS labels may be up to 8 characters; DOS labels may be up to 11 uppercase characters.

-B file

Install bootloader in file on an MS-DOS diskette. Can only be used with -d or -t dos.

-D

Format a 720KB (3.5 inch) or 360KB (5.25 inch) double-density diskette. Use on high- or extended-density drives.

-e

Eject floppy disk when done.

-E

Format a 2.88MB (3.5 inch) extended-density diskette.

-f

Force. Do not prompt for confirmation before formatting.

-H

Format a 1.44MB (3.5 inch) or 1.2MB (5.25 inch) high-density diskette. Use on extended-density drive.

-M

Use a 1.2MB (3.5 inch) medium-density format on a high-density diskette. Use only with the -t nec option.

-q

Quiet mode. Don't print status messages.

-t dos

Install an MS-DOS filesystem and boot sector formatting.

-t nec

Install an NEC-DOS filesystem and boot sector after formatting. Use only with -M.

-U

Unmount any filesystems on the media, and then format.

-v

Verify each block on the media after formatting.

-x

Don't format, just write a SunOS label or MS-DOS filesystem.

Solaris Compatibility Options

These options are for compatibility with previous versions of fdformat. Their use is discouraged.

-d

Same as -t dos.

-l

Same as -D.

-L

Same as -D.

-m

Same as -M.

GNU/Linux Option

-n

Do not verify format after completion.

[*] As Macintosh systems don't have floppy disk drives, this command would be of no use, anyway.

Name

fgrep

Synopsis

    fgrep [options] [pattern] [files]

Search one or more files for lines that match a literal, text-string pattern. Because fgrep does not support regular expressions, it is potentially faster than grep (hence fgrep, for fast grep). Exit status is 0 if any lines match, 1 if not, and 2 for errors. See also egrep and grep.

The options for fgrep are the same as for egrep, including the Solaris versus GNU differences. See egrep for the full list.

Examples

Print lines in file that don't contain any spaces:

    fgrep -v ' ' file

Print lines in file that contain the words in spell_list :

    fgrep -f spell_list file

Name

file

Synopsis

    file [options]files

Classify the named files according to the type of data they contain. file checks the magic file (usually /etc/magic) to identify many common file types.

Many file types are understood. Output lists each filename, followed by a brief classification such as:

    ascii text
    c program text
    c shell commands
    data
    empty
    iAPX 386 executable
    directory
    [nt]roff, tbl, or eqn input text
    shell commands
    symbolic link to ../usr/etc/arp

Mac OS X and GNU/Linux use the freely-available version of file from ftp://ftp.astron.com/pub/file/.

Solaris Options

-c

Check the format of the magic file (files argument is invalid with -c).

-d

Apply any default system tests that are position-dependent or context-dependent to the file.

-f listfile

Run file on the filenames in listfile.

-h

Do not follow symbolic links.

-i

For regular files, do not attempt to classify the file further. Instead, just print the message "regular file."

-m file

/usr/xpg4/bin/magic: same as -M.

/usr/bin/magic: use file as the magic file instead of /etc/magic.

-M file

file contains position-dependent or context-sensitive tests to apply.

Astron.com file Options

-b, --brief

Brief mode; do not prepend filenames to output lines.

-c, --checking-printout

Check the format of the magic file (files argument is invalid with -c). Usually used with -m.

-C, --compile

Create a magic.mgc file, which is a preparsed version of the magic file.

-ffile, --files-fromfile

Read the names of files to be checked from file.

-Fsep, --separatorsep

Use sep as the separator between the filename and the type. The default is :.

-i, --mime

Produce MIME type strings instead of the traditional output.

-k, --keep-going

Keep going after the first match.

-L, --dereference

Follow symbolic links. By default, symbolic links are not followed.

-mfilelist, --magic-filefilelist

Search for file types in filelist instead of /usr/share/magic. filelist may be a single filename or a colon-separated list of files. If a compiled magic file is found, it is used. With -i, file appends .mime to each filename.

-n, --no-buffer

Flush standard output after checking a file.

-N, --no-pad

Do not pad filenames to make them align in the output.

-p, --preserve-date

Attempt to preserve the access times of read files so that it looks as if file never read them.

-r, --raw

Do not translate unprintable characters into their octal equivalents.

-s, --special-files

Read the contents of block or character device special files, instead of being merely content to display their type.

-v, --version

Print the version and exit.

-z, --uncompress

Attempt checking of compressed files.

Example

List all files that are deemed to be HTML input:

    file * | grep -i HTML

Name

find

Synopsis

    find [options]pathname(s) condition(s)

An extremely useful command for finding particular groups of files (numerous examples follow this description). find descends the directory tree beginning at each pathname and locates files that meet the specified conditions. At least one pathname must be specified. The most useful conditions include -print, -name, and -type (for general use), -exec and -size (for advanced users), and -mtime and -user (for administrators).

On very old systems, you must supply at least one condition. If you don't, find traverses the pathnames but doesn't produce any output. Therefore, for highest portability, always provide -print.

Conditions may be grouped by enclosing them in \( \) (escaped parentheses), negated with ! (use \! in the C shell), given as alternatives by separating them with -o, or repeated (adding restrictions to the match; usually only for -name, -type, and -perm).

The find command can often be combined with the xargs command when there are too many files for naming on the command line. (See xargs.)

Tip

find is yet another example of a Unix command that has a core set of common abilities, with many system-specific extensions. Take careful note of which systems support which conditions.

Solaris and Mac OS X Options

-H

Only for files named on the command line, follow symbolic links, working with the information about the linked-to file, instead of the symbolic link itself.

-L

For all symbolic links, follow the link, working with the information about the linked-to file, instead of the symbolic link itself.

GNU/Linux Option

-daystart

Calculate times from the start of the day today, not 24 hours ago.

Mac OS X Options

-d

Do a depth-first traversal, directories being visited after their children (postorder). The default is a preorder traversal, with directories being visited before their children.

-E

Interpret regular expressions for -regex and -iregex as Extended Regular Expressions. (See Chapter 7.)

-f pathname

Descend pathname.

-P

For symbolic links, use information about the link itself, not the linked-to file. This is the default.

-s

Traverse file hierarchies in lexicographical order.

-x

Do not descend into directories on different devices (filesystems) from the one where the descent began.

-X

For use with xargs, complain if the filename contains an xargs delimiter character (any of single quote, double quote, backslash, space, tab, or newline). Such files are skipped.

Common Conditions

-atime+n | -n | n

Find files that were last accessed more than n (+ n), less than n (- n), or exactly n days ago. Note that find will change the access time of directories supplied as pathnames.

-ctime+n | -n | n

Find files that were changed more than n (+ n), less than n (- n), or exactly n days ago. Change refers to modification, permission or ownership changes, etc.; therefore, -ctime is more inclusive than -atime or -mtime.

-depth

Descend the directory tree, skipping directories and working on actual files first (and then the parent directories). Useful when files reside in unwritable directories (e.g., when using find with cpio).

-exec command { } \;

Run the Unix command on each file matched by find, provided command executes successfully on that file; i.e., returns a 0 exit status. When command runs, the argument { } is replaced with the name of the current file. Follow the entire sequence with an escaped semicolon (\;).

-follow

Follow symbolic links and track the directories visited (don't use this with -type l).

-fstype type

Find files that reside on filesystems of type type.

-group gname

Find files belonging to group gname, which can be a group name or a group ID number.

-inum n

Find files whose inode number is n.

-links n

Find files having n links.

-ls

Display matching files with associated statistics (as if run through ls -lids).

-mount

Search for files that reside only on the same filesystem as pathname. Solaris and GNU/Linux only. (On Mac OS X, use -xdev instead.)

-mtime+n | -n | n

Find files that were last modified more than n (+ n), less than n (- n), or exactly n days ago.

-name pattern

Find files whose names match pattern. Filename metacharacters may be used, but should be escaped or quoted.

-newer file

Find files that have been modified more recently than file; similar to -mtime.

-nogroup

Find files belonging to a group not in /etc/group.

-nouser

Find files owned by a user not in /etc/passwd.

-ok command { } \;

Same as -exec, but user must respond (with a y) before command is executed.

-perm nnn

Find files whose permission settings (e.g., rwx) match octal number nnn exactly (e.g., 664 matches -rw-rw-r--). Use a minus sign to make a wildcard match of any specified bit (e.g., -perm -600 matches -rw*******, where * can be any mode). Some systems also allow + nnn for this purpose.

Solaris allows nnn to be a symbolic mode in the same form as allowed by chmod.

-print

Print the matching files and directories, using their full pathnames. On modern systems, this is the default action.

-prune

"Prune" the directory tree of unwanted directory searches; that is, skip the directory most recently matched.

-sizen[c]

Find files containing n blocks, or, if c is specified, files that are n characters (bytes) long. (One block = 512 bytes). Some systems allow n k to specify the size in kilobytes.

-type c

Find files whose type is c. c can be:

b

Block special file

c

Character special file

d

Directory

D

Door special file, Solaris and GNU version only

f

Plain file

l

Symbolic link

p

Fifo or named pipe

s

Socket

-user user

Find files belonging to a user name or ID.

-xdev

Same as -mount.

GNU/Linux and Mac OS X Conditions

-amin +n | -n | n

Find files last accessed more than n (+n), less than n (- n), or exactly n minutes ago.

-anewer file

Find files that were accessed after file was last modified. Affected by -follow when after -follow on the command line.

-cmin +n | -n | n

Find files last changed more than n (+n), less than n (- n), or exactly n minutes ago.

-cnewer file

Find files that were changed after they were last modified. Affected by -follow when after -follow on the command line.

-empty

Continue if file is empty. Applies to regular files and directories.

-false

Return false value for each file encountered.

-iname pattern

A case-insensitive version of -name.

-ipath pattern

A case-insensitive version of -path.

-iregex pattern

A case-insensitive version of -regex.

-maxdepth num

Do not descend more than num levels of directories.

-mindepth num

Begin applying tests and actions only at levels deeper than num levels.

-mmin +n | -n | n

Find files last modified more than n (+n), less than n (- n), or exactly n minutes ago.

-not expr

Same as ! expr.

-path pattern

Find files whose names match pattern. Expect full pathnames relative to the starting pathname (i.e., do not treat / or . specially).

-print0

Like -print, but terminate the pathname with a zero byte. This allows programs that read filenames to interpret them unambiguously. See also xargs.

-regex pattern

Like -path, but uses grep-style regular expressions instead of the shell-like globbing used in -name and -path.

Solaris Conditions

-acl

True if the file has ACLs (Access Control Lists) defined.

-cpio dev

Take matching files and write them on device dev, using cpio. Obsolete.

-local

Find files that physically reside on the local system.

-ncpio dev

Take matching files and write them on device dev, using cpio -c. Obsolete.

-xattr

True if the file has extended attributes.

GNU/Linux Conditions

-contextscontext, --contextscontext

File has security context scontext. SELinux only.

-fls file

Like -ls, but send output to file.

-fprint file

Like -print, but send output to file.

-fprint0 file

Like -print0, but send output to file.

-fprintf file format

Like -printf, but send output to file.

-gid num

Find files with numeric group ID of num.

-ilname pattern

A case-insensitive version of -lname.

-lname pattern

Search for files that are symbolic links, pointing to files named pattern. pattern can include shell metacharacters and does not treat / or . specially. The match is case-insensitive.

-noleaf

Normally, find assumes that each directory has at least two hard links that should be ignored (a hard link for its name and one for "."; i.e., two fewer "real" directories than its hard link count indicates). -noleaf turns off this assumption, a useful practice when find runs on non-Unix-style filesystems. This forces find to examine all entries, assuming that some might prove to be directories into which it must descend (a time-waster on Unix).

-printf format

Print using format to standard output. Interpret escape sequences and special formatting control sequences that begin with %. See the manpage for the full details.

-true

Return true value for each file encountered.

-uid num

Find files with numeric user ID of num.

-used num

File was accessed num days after it was modified.

-xtype c

Like -type except for symbolic links. For symbolic links, this checks the type of the linked-to file. However, with -follow, find checks the link itself, and this condition will be true only if c is l.

Mac OS X Conditions

-delete

Delete found files or directories. Always returns true. Use with extreme caution.

-execdir command { } \;

Like -exec, but execute the command from within the directory holding the current file. The filename substituted for { } is not fully qualified.

-flags[+|-]flags,notflags

Check that the given flags are set and that the notflags (flag names prefixed with no) are not set. The flags are those managed by chflags. With a leading -, the condition evaluates to true if at least all the bits in flags must be set and all the bits in notflags must be clear. With a leading +, the condition evaluates to true if any of the bits in flags are set and any of the bits in notflags are clear. Otherwise, the file's flags must exactly match the combination of flags and notflags.

-mnewer file

Same as -newer.

-newer XY file

Compare the attribute X of the current file against the attribute Y of file. Values for X and Y may be a for the access time, c for the inode change time, or m for the modification time. Additionally, Y may be t, in which case file is expected to be a date specification as understood by CVS. (See Chapter 14.)

-okdir command { } \;

Like -ok, but execute the command from within the directory holding the current file. The filename substituted for { } is not fully qualified.

Examples

List all files (and subdirectories) in your home directory:

    find $HOME -print

List all files named chapter1 underneath the /work directory:

    find /work -name chapter1 -print

List "memo" files owned by ann (note the use of multiple starting paths):

    find /work /usr -name 'memo*' -user ann -print

Search the filesystem (begin at root) for manpage directories:

    find / -type d -name 'man*' -print

Search the current directory, look for filenames that don't begin with a capital letter, and send them to the printer:

    find . \! -name '[A-Z]*' -exec lp {  } \;

Find and compress files whose names don't end with .gz:

    gzip 'find . -type f \! -name '*.gz' -print'

Remove all empty files on the system (prompting first):

    find / -size 0 -ok rm {  } \;

Skip RCS directories, but list remaining read-only files:

    find . -name RCS -prune -o -perm 444 -print

Search the system for files that were modified within the last two days (good candidates for backing up):

    find / -mtime -2 -print

Recursively grep for a pattern down a directory tree:

    find /book -print | xargs grep '[Nn]utshell'

Name

finger

Synopsis

    finger [options]users

Display data about one or more users, including information listed in the files .plan and .project in user's home directory. You can specify each user either as a login name (exact match) or as a first or last name (display information on all matching names). Networked environments recognize arguments of the form user @ host and @ host. (Today, many systems on the Internet disallow connections from finger requests.)

Common Options

-l

Force long format (default).

-m

users must match usernames exactly, instead of also searching for a match of first or last names.

-p

Omit .plan file from display. On Mac OS X, this also omits the .forward, .project, and .pubkey files.

-s

Show short format.

Solaris Options

-b

Omit user's home directory and shell from display.

-f

Used with -s to omit heading that normally displays in short format.

-h

Omit .project file from display.

-i

Show "idle" format, a terse format (like -s).

-q

Show "quick" format, the tersest of all (requires an exact match of username).

-w

Use with -s to omit user's full name that normally displays in short format.

Mac OS X Options

-4

Use only IPv4 addresses.

-6

Use only IPv6 addresses.

-g

Display only the user's real name from the gecos information.

-h

Together with -s, display the remote host information instead of the office information.

-o

Together with -s, display only the office information.

-T

Don't piggyback data with the initial connection request. Needed for some servers with broken TCP/IP implementations.

Name

flex

Synopsis

    flex [options] [file]

flex (Fast Lexical Analyzer Generator) is a faster variant of lex. It generates a lexical analysis program (named lex.yy.c) based on the regular expressions and C statements contained in one or more input files. See also lex, bison, yacc, and lex & yacc, cited in the Bibliography.

URL: http://www.gnu.org/software/flex.

Options

-b

Generate backup information to lex.backup.

-B

Generate a batch (noninteractive) scanner.

-c

Ignored; for POSIX compliance only.

-C

Compress scanner tables but do not use equivalence classes or metaequivalence classes.

-Ca

Align tables for memory access and computation. This creates larger tables but gives faster performance.

-Ce

Construct equivalence classes. This creates smaller tables and sacrifices little performance (default).

-Cf

Generate full scanner tables, not compressed.

-CF

Generate faster scanner tables, like -F.

-Cm

Construct metaequivalence classes (default).

-Cr

Bypass use of the standard I/O library; use read(2) system calls instead.

-d

Debug mode.

-f

Create a faster but larger scanner.

-F

Use the fast scanner table representation.

-h, -?, --help

Help summary.

-i

Create a case-insensitive scanner.

-I

Generate an interactive scanner (default).

-l

Maximum lex compatibility.

-L

Suppress #line directives in lex.yy.c.

-n

Ignored; for POSIX compliance only.

-o file

Write output to file instead of lex.yy.c.

-p

Print performance report to standard error.

-P prefix

Change default yy prefix to prefix for all globally visible variable and function names.

-s

Create a scanner that exits if it encounters input that does not match any of its rules.

-S skeleton_file

Use skeleton_file for the code skeleton, instead of the default file. This option is mainly for use by the flex maintainers.

-t

Print to standard output. (By default, flex prints to lex.yy.c.)

-T

Run in trace mode. This produces considerable output, which is mainly of use to the flex maintainers.

-v

Print a summary of statistics to standard error.

-V, --version

Print version information and exit.

-w

Suppress warning messages.

-7

Generate a seven-bit scanner.

-8

Generate an eight-bit scanner (default).

-+

Generate a C++ scanner class.

Name

fmt

Synopsis

    fmt [options] [files]

Fill and join text, producing lines of roughly the same length. (Unlike nroff, the lines are not justified.) fmt ignores blank lines and lines beginning with a dot (.) or with "From:". The emacs editor uses ESC-q to join paragraphs, so fmt is useful for other editors, such as vi. The following vi command fills and joins the remainder of the current paragraph:

    !}fmt

Solaris Options

-c

Don't adjust the first two lines; align subsequent lines with the second line. Useful for paragraphs that begin with a hanging tag.

-s

Split long lines but leave short lines alone. Useful for preserving partial lines of code.

-w n

Create lines no longer than n columns wide. Default is 72. (Can also be invoked as - n for compatibility with BSD.)

GNU/Linux Options

-c, --crown-margin

Crown margin mode. Do not change indentation of each paragraph's first two lines. Use the second line's indentation as the default for subsequent lines.

-pprefix, --prefix=prefix

Format only lines beginning with prefix.

-s, --split-only

Suppress line-joining.

-t, --tagged-paragraph

Tagged paragraph mode. Same as crown mode when the indentations of the first and second lines differ. If the indentation is the same, treat the first line as its own separate paragraph.

-u, --uniform-spacing

Reduce spacing to a maximum of one space between words and two between sentences.

-wwidth, --width=width

Set output width to width. The default is 75.

Mac OS X Options

-c

Center each line of text. Most other options are ignored, and no splitting or joining of lines is done.

-d charlist

Treat the characters in charlist as sentence-ending characters. The default list is .?! (period, question mark, and exclamation mark).

-l count

Replace each count spaces at the beginning of a line with a tab character. The default is eight. If count is zero, spaces are preserved.

-m

Attempt to sensibly format mail header lines.

-n

Format lines that begin with . (dot). Normally, for nroff compatibility, fmt leaves such lines alone.

-p

Allow indented paragraphs. Normally changes in leading whitespace start a new output paragraph. This option disables that behavior.

-s

Condense multiple whitespace characters inside lines into single spaces.

-t count

Assume that input files use count spaces per tab stop. The default is eight.

Name

ftp

Synopsis

    ftp [options] [hostname]

Transfer files to and from remote network site hostname. ftp prompts the user for a command. Type help to see a list of known commands.

Common Options

-d

Enable debugging.

-e

Disable command-line editing and history. GNU/Linux and Mac OS X only.

-g

Disable filename expansion (globbing).

-i

Turn off interactive prompting.

-n

No auto-login upon initial connection.

-p

Use passive mode for transfering data.

-v

Verbose on. Show all responses from remote server.

Solaris Options

-a

Use GSSAPI authentication. If authentication fails, close the connection.

-v

Forward local security credentials to the server.

-m GSSAPI-mech

Use the provided GSSASPI mechanism. For details see mech(4).

-t

Enable packet tracing. This option is not yet implemented.

-T timeout

Use timeout in seconds for the global connection timer.

-x

Use GSSAPI for authentication and encryption.

Mac OS X Options

-4

Use only IPv4 addresses.

-6

Use only IPv6 addresses.

-a

Use anonymous login instead of the normal login procedure.

-A

Force active mode FTP. The default is passive mode.

-f

Force a cache reload when a transfer goes through an FTP or HTTP proxy.

-N netrc-file

Use the given file instead of $HOME/.netrc.

-o file

Save the first automatically retrieved file to file, unless file is - or starts with |. See the manpage for more details.

-P port

Use port number port.

-r count

When a connection attempt fails, wait count seconds and then retry.

-R

Restart all nonproxied auto-fetches.

-t

Enable packet tracing.

-Tdirection,max[,incr]

Set the maximum transfer rate in direction to max bytes/second. If given, set the increment to incr. See the manpage for more information.

-uurl file ...

Upload one or more files to url.

-v

Enable the verbose and progress commands. This is the default when output is to a terminal.

-V

Disable the verbose and progress commands.

Name

g++

Synopsis

    g++ [options]files

Invoke gcc with the options necessary to make it recognize C++. g++ recognizes all the file extensions gcc does, in addition to C++ source files (.C, .cc, .cpp, or .cxx files) and C++ preprocessed files (.ii files). See also gcc.

Name

gcc

Synopsis

    gcc [options]files

GNU Compiler Collection. gcc, formerly known as the GNU C Compiler, compiles multiple languages (C, C++, Objective-C, Ada, Fortran, and Java) to machine code. Here we document its use to compile C, C++, or Objective-C code. gcc compiles one or more program source files; for example, C source files (file.c), assembler source files (file.s), or preprocessed C source files (file.i). If the file suffix is not recognizable, assume that the file is an object file or library. gcc normally invokes the C preprocessor, compiles the preprocessed code to assembly language code, assembles it, and then links it with the linker. This process can be stopped at one of these stages using the -c, -S, or -E option. The steps may also differ depending on the language being compiled. By default, output is placed in a.out. In some cases, gcc generates an object file having a .o suffix and a corresponding root name.

Preprocessor and linker options given on the gcc command line are passed on to these tools when they are run. These options are briefly described here, but some are more fully described under the entry for ld. The options that follow are divided into general, preprocessor and linker options. We have included only the most generally useful options. gcc accepts many, many more options not covered here.

Tip

gcc is the GNU form of cc; on most Linux systems, the command cc invokes gcc. The command g++ invokes gcc with the appropriate options for interpreting C++; see g++.

URL: http://gcc.gnu.org.

General options

-a

Provide profile information for basic blocks.

-ansi

Enforce full ANSI conformance.

-c

Create linkable object file for each source file, but do not call the linker.

-E

Preprocess the source files, but do not compile. Print result to standard output. This option is useful to meaningfully pass some cpp options that would otherwise break gcc, such as -C, -M, or -P.

-f option

Set the specified compiler option. Many of these control debugging, optimization of code, and special language options. Use the --help -v options for a full listing.

-g

Include debugging information for use with gdb.

-g level

Provide level amount of debugging information. level must be 1, 2, or 3, with 1 providing the least amount of information. The default is 2.

--help

Print most common basic options, then exit. When used with option -v, print options for all of gcc's subprocesses. For options specific to a target, use --target-help.

-m option

Set the specified machine specific option. Use the --target-help option for a full listing.

-o file

Specify output file as file. Default is a.out.

-O[level]

Optimize. level should be 1, 2, 3, or 0 (the default is 1). 0 turns off optimization; 3 optimizes the most.

-p

Provide profile information for use with prof.

-pedantic

Warn verbosely.

-pg

Provide profile information for use with gprof.

-std= standard

Specify C standard of input file. Accepted values are:

iso9899:1990, c89

1990 ISO C standard.

iso9899:199409

1994 amendment to the 1990 ISO C standard.

iso9899:1999, c99, iso9899:199x, c9x

1999 revised ISO C standard.

gnu89

1990 C Standard with GNU extensions (the default value).

gnu99, gnu9x

1999 revised ISO C standard with GNU extensions.

-S

Compile source files into assembler code, but do not assemble.

-v

Print version information.

-V version

Attempt to run gcc version version.

-w

Suppress warnings.

-W

Warn more verbosely than normal.

-Wall

Enable almost all possible warnings. See the manpage for a detailed list of available warnings.

-x language

Expect input file to be written in language, which may be c, objective-c, c-header, c++, ada, f77, ratfor, assembler, java, cpp-output, c++-cpp-output, objc-cpp-output, f77-cpp-output, assembler-with-cpp, or ada. If none is specified as language, guess the language by filename extension.

Preprocessor options

gcc passes the following options to the preprocessor:

-Dname[=def]

Define name with value def as if by #define. If no =def is given, name is defined with value 1. -D has lower precedence than -U.

-I dir

Include dir in list of directories to search for include files. If dir is -, search those directories specified by -I before the -I- only when #include " file " is specified, not #include < file >.

-M, -MG, -MF, -MD, -MMD, -MQ, -MT

Suppress normal output and print Makefile rules describing file dependencies. Print a rule for make that describes the main source file's dependencies. If -MG is specified, assume that missing header files are actually generated files, and look for them in the source file's directory. Most of these options imply -E.

-trigraphs

Convert special three-letter sequences, meant to represent missing characters on some systems, into the single character they represent.

-U name

Remove definition of symbol name.

Linker options

gcc passes the following options to the linker:

-l lib

Link to lib.

-L dir

Search dir in addition to standard directories for libraries.

-s

Remove all symbol table and relocation information from the executable.

-u symbol

Force the linker to search libraries for a definition of symbol, and to link to the libraries found.

Name

gcore

Synopsis

    gcore [option]process_ids

Solaris and GNU/Linux only. Create ("get") a core image of each running process specified. The core image can be used with a debugger. You must own the running process or be a privileged user to use this command.

Common Option

-o file

Place the output in a file named file . process_id (default is core. process_id).

Solaris Options

-c content

Place content in the core file. See coreadm(1M) for details on the values of content.

-F

Force; take control of pid even if another process had control of it.

-g

Produce a core file in the global repository with global content as configured via coreadm(1M). You must have permission to create files in the global core repository.

-p

Produce a core file in the process-specific repository with process-specific content as configured via coreadm(1M). You must have permission to create files in the process-specific core repository.

Name

gdb

Synopsis

    gdb [options] [program [core | pid]]

GDB (the GNU DeBugger) allows you to step through the execution of a program in order to find the point at which it breaks. It supports a number of languages. The program to be debugged is normally specified on the command line; you can also specify a core file or, if you want to investigate a running program, a process ID. For more information, see Chapter 17.

Name

getconf

Synopsis

    getconf [-v spec] system_var
    getconf [-v spec] path_var path
    getconf -a

This command is specified by POSIX as a portable way of determining system limits. In the first form, print the value of system configuration variables . In the second, print the value of filesystem-related parameters . In the third, print the values of all system configuration variables.

Options

-a

Print the names and values of all system configuration variables. Solaris only.

-v spec

Use spec to govern the selection of values for configuration variables.

Name

getopts

Synopsis

    getopts string name [arg]

Same as built-in Bash and ksh shell command getopts. See Chapter 4.

Name

gettext

Synopsis

    gettext [options] [domain]string

Solaris and GNU/Linux only. Retrieve and print the translated version of string. This provides shell-level access to the facilities of gettext (3C). Translations are looked up in the file lang /LC_MESSAGES/ domain .mo in the system's translation directory. lang is the current locale (e.g., en_US). If domain is not supplied, the value of $TEXTDOMAIN is used instead. Without a domain, or if no translation can be found, gettext simply prints string. If $TEXTDOMAINDIR exists, its value is used instead of the system default.

Tip

The GNU version of gettext and the accompanying commands and library functions are an extension of the original Solaris design from the early 1990s. Modern Solaris versions of the commands have picked up some of the features first developed for the GNU version. Thus, for example, even the Solaris version of this command accepts long options.

URL: http://www.gnu.org/software/gettext .

Options

-ddomain, --domain=domain

Retrieve messages from the domain text domain.

-e

Enable expansion of some escape sequences. Use with -s.

-h, --help

Print a command-line summary and exit. GNU/Linux only.

-n

Don't print the trailing newline. Use with -s.

-s

Enable echo-like features (-e and -n).

-V, --version

Print version information and exit. GNU/Linux only.

Name

ghostscript

Synopsis

    ghostscript [options]files

GhostScript, an interpreter for Adobe Systems' PostScript and PDF (Portable Document Format) languages. Used for document processing. With - in place of files, standard input is used. The usual name is gs; see gs.

Name

gprof

Synopsis

    gprof [options] [objfile [pfile]]

Display call-graph profile data of C programs. Programs compiled with the -xpg option of Sun's cc (-pg on other compilers) produce a call-graph profile file pfile, whose default name is gmon.out. The specified object file objfile (a.out by default) contains a symbol table that is read and correlated with pfile.

URL: http://www.gnu.org/software/binutils for the GNU version of gprof.

Common Options

-a, --no-static

Don't print statically declared functions.

-b, --brief

Brief; don't print field descriptions in the profile.

-c, --static-call-graph

Find the program's static call-graph. Call counts of 0 indicate static-only parents or children.

-e name

Don't print the graph profile entry for the routine name. -e may be repeated.

-E name

Like -e. In addition, during time computations, omit the time spent in name.

-f name

Print the graph profile entry only for routine name. -f may be repeated.

-F name

Like -f. In addition, during time computations, use only the times of the printed routines. -F may be repeated, and it overrides -E.

-s, --sum

With this option, you supply one or more existing pfiles. Sum the information in all specified profile files and send it to a profile file called gmon.sum. Useful for accumulating data across several runs.

-z, --display-unused-functions

Show routines that have zero usage. Useful with -c to find out which routines were never called.

Solaris Options

- n

Only print the top n functions.

-C

Demangle C++ symbol names before printing them out.

-D

With this option, you supply one or more existing pfiles. Process the information in all specified profile files and produce a profile file called gmon.sum that shows the difference between the runs. See also the -s option.

-l

Don't print entries for local symbols.

GNU/Linux Options

-A[symspec], --annotated-source[=symspec]

Print annotated source code.

-C[symspec], --exec-counts[=symspec]

Print statistics on the number of times each function is called. When used with option -l, count basic-block execution.

-d[num], --debug[=num]

Turn on debugging. Use num to specify specific debugging features; otherwise enable all debugging. See the gprof Info file for more information.

-D, --ignore-non-functions

Ignore symbols that are not known functions. This produces more accurate profiles.

--demangle[=style], --no-demangle

Specify whether C++ symbols should be demangled or not. They are demangled by default. If profiling a program built by a different compiler, you may need to specify the mangling style.

--file-ordering file

Print suggested link line order for .o files based on profiling data. Read function name to object file mappings from file. This file can be created using the nm command.

--function-ordering

Print suggested function order based on profiling data.

-i, --file-info

Print summary information on data files, then exit.

-Idirs, --directory-path=dirs

Set directory path to search for source files. The dirs argument may be given as a colon-separated list of directories.

-J[symspec], --no-annotated-source[=symspec]

Don't print annotated source code.

-k from/to

Remove arcs between the routines from and to.

-l, --line

Generate line-by-line profiles. This can increase gprof's running time and may be less statistically accurate.

-L, --print-path

Print the path information when printing filenames.

-mn, --min-count[=n]

Don't print count statistics for symbols executed less than n times.

-n[symspec], --time[=symspec]

Propagate time statistics in call graph analysis.

-N[symspec], --no-time[=symspec]

Don't propagate time statistics in call graph analysis.

-Oformat, --file-format[=format]

Use format for the output file format. Acceptable values are auto (the default), bsd, 4.4bsd, magic, and prof (not yet implemented).

-p[symspec], --flat-profile[=symspec]

Print profile statistics.

-P[symspec], --no-flat-profile[=symspec]

Don't print profile statistics.

-q[symspec], --graph[=symspec]

Print call graph analysis.

-Q[symspec], --no-graph[=symspec]

Don't print call graph analysis.

-T, --traditional

Print output in BSD style.

-v, --version

Print version and exit.

-wn, --width=n

Print function index formatted to width n.

-x, --all-lines

When printing annotated source, annotate every line in a basic block, not just the beginning.

-y, --separate-files

Print annotated-source output to separate files instead of standard output. The annotated source for each source file is printed to filename -ann.

-Z[symspec], --no-exec-counts[=symspec]

Don't print statistics on the number of times each function is called.

Mac OS X Options

-S

Create the "order" files gmon.order, callf.order, callo.order, and time.order, for use with ld. To include library functions in the files, you must have a whatsloaded file from ld in the current directory. For more details see ld(1).

Name

grep

Synopsis

    grep [options] regexp [files]

Search one or more files for lines that match a regular expression regexp. Regular expressions are described in Chapter 7. Exit status is 0 if any lines match, 1 if not, and 2 for errors. See also egrep and fgrep.

Options

The options for grep are the same as for egrep, including the Solaris versus GNU differences. For Solaris, there is an exception: /usr/xpg4/bin/grep also accepts the -q option. See egrep for the full list.

Examples

List the number of users who use the C shell:

    grep -c /bin/csh /etc/passwd

List header files that have at least one #include directive:

    grep -l '^#include' /usr/include/*

List files that don't contain pattern :

    grep -c pattern files | grep :0

Name

groff

Synopsis

    groff [options] [files]

The GNU version of troff. Formats documents to screen or for laser printing. See Chapter 18.

Name

groups

Synopsis

    groups [options] [user]

Show the groups that user belongs to (default is your groups). Groups are listed in /etc/passwd and /etc/group.

Name

gs

Synopsis

    gs [options] [files]

Solaris (in /usr/sfw/bin), and GNU/Linux only. GhostScript, an interpreter for Adobe Systems' PostScript and PDF (Portable Document Format) languages. Used for document processing. With - in place of files, standard input is used.

URLs: http://www.gnu.org/software/ghostscript and http://www.cs.wisc.edu/~ghost/.

Options

-- filename arg1 ...

Take the next argument as a filename, but use all remaining arguments to define ARGUMENTS in userdict (not systemdict) as an array of those strings before running the file.

-Dname=token, -dname=token

Define a name in systemdict with the given definition. The token must be exactly one token (as defined by the token operator) and must not contain any whitespace.

-Dname, -dname

Define a name in systemdict with a null value.

-g number1 x number2

Specify width and height of device; intended for systems like the X Window System.

-I directories

Add the designated list of directories at the head of the search path for library files.

-q

Quiet startup.

-rnumber, -rnumber1xnumber2

Specify X and Y resolutions (for the benefit of devices, such as printers, that support multiple X and Y resolutions). If only one number is given, it is used for both X and Y resolutions.

-Sname=string, -sname=string

Define a name in systemdict with a given string as value.

Special names

-dDISKFONTS

Causes individual character outlines to be loaded from the disk the first time they are encountered.

-dNOBIND

Disables the bind operator. Useful only for debugging.

-dNOCACHE

Disables character caching. Useful only for debugging.

-dNODISPLAY

Suppresses the normal initialization of the output device. May be useful when debugging.

-dNOPAUSE

Disables the prompt and pause at the end of each page.

-dNOPLATFONTS

Disables the use of fonts supplied by the underlying platform (e.g., the X Window System).

-dSAFER

Disables the deletefile and renamefile operators and the ability to open files in any mode other than read-only.

-dWRITESYSTEMDICT

Leaves systemdict writable.

-sDEVICE=device

Selects an alternate initial output device.

-sOUTPUTFILE=filename

Selects an alternate output file (or pipe) for the initial output device.

Name

gunzip

Synopsis

    gunzip [gzip
 options] [files]

Identical to gzip -d. Typically provided as a hard link to gzip. The -1 ... -9 and corresponding long-form options are not available with gunzip; all other gzip options are accepted. See gzip for more information.

Name

gzcat

Synopsis

    gzcat [gzip options] [files]

A link to gzip instead of using the name zcat, which preserves zcat's original link to the old compress command. Its action is identical to gunzip -c. May be installed as zcat on some systems. See gzip for more information.

Name

gzip

Synopsis

    gzip [options] [files]

GNU Zip. Reduce the size of one or more files using Lempel-Ziv (L Z 7 7) coding, and move to file .gz. Restore with gunzip. With a filename of -, or with no files, gzip reads standard input. Usually, compression is considerably better than that provided by the old compress command. Furthermore, the algorithm is patent-free. Today, gzip is the de-facto compression software used throughout the Internet. (Although bzip2 is also popular, see bzip2.)

gzip ignores symbolic links. The original file's name, permissions, and modification time are stored in the compressed file, and restored when the file is uncompressed. gzip is capable of uncompressing files that were compressed with compress, pack, or the BSD compact. Default options may be placed in the environment variable GZIP.

gunzip is equivalent to gzip -d. It is typically a hard link to the gzip command. gzcat and zcat are equivalent to gunzip -c, and are also often hard links to gzip.

Additional related commands include gzcmp, which compares the contents of gzipped files; gzdiff, which creates diff (difference) files from a pair of gzip files; gzgrep, to search them; and the gzless and gzmore commands, which apply the more and less commands to gzip output as gzcat does with the cat command. See cat, cmp, diff, grep, less, and more for information on how to use those commands.

URL: http://www.gzip.org.

Options

-a, --ascii

ASCII text mode: convert end-of-lines using local conventions. Not supported on all systems.

-c, --stdout, --to-stdout

Write output on standard output; keep original files unchanged. Individual input files are compressed separately; for better compression, concatenate all the input files first.

-d, --decompress, --uncompress

Decompress.

-f, --force

Force. The file is compressed or decompressed, even if the target file exists or if the file has multiple links.

-h, --help

Display a help screen and exit.

-l, --list

List the compressed and uncompressed sizes, the compression ratio, and the original name of the file for each compressed file. With --verbose, also list the compression method, the 32-bit CRC, and the original file's last-modification time. With --quiet, the title and totals lines are not displayed.

-L, --license

Display the gzip license and quit.

-n, --no-name

For gzip, do not save the original filename and modification time in the compressed file. For gunzip, do not restore the original name and modification time; use those of the compressed file (this is the default).

-N, --name

For gzip, save the original filename and modification time in the compressed file (this is the default). For gunzip, restore the original filename and modification time based on the information in the compressed file.

-q, --quiet

Suppress all warnings.

-r, --recursive

Recursively walk the current directory tree and compress (for gunzip, uncompress) all files found.

--rsyncable

Make an archive that is "friendly" to rsync. Not supported on all systems.

-S.suf, --suffix.suf

Use .suf as the suffix instead of .gz. A null suffix makes gunzip attempt decompression on all named files, no matter what their suffix.

-t, --test

Check the compressed file integrity.

-v, --verbose

Display the name and percentage reduction for each file compressed or decompressed.

-V, --version

Display the version number and compilation options, and then quit.

-n, --fast, --best

Control the compression method. n is a number between 1 and 9. -1 (same as --fast) gives the fastest, but least compressed method. -9 (same as --best) gives the best compression, but is slower. Values between 1 and 9 vary the tradeoff in compression method. The default compression level is -6, which gives better compression at some expense in speed. In practice, the default is excellent, and you should not need to use these options.

Name

head

Synopsis

    head [options] [files]

Print the first few lines of one or more files (default is 10).

Common Options

- n

Print the first n lines of the file. This is traditional head behavior, although it is not blessed by all versions of the POSIX standard.

-n n

Print the first n lines of the file.

GNU/Linux Options

-cnum[b|k|m], --bytesnum[b|k|m]

Print first num bytes or, if num is followed by b, k, or m, first num 512-byte blocks, 1-kilobyte blocks, or 1-megabyte blocks.

--lines num

Same as -n.

-q, --quiet, --silent

Quiet mode; never print headers giving filenames.

-v, --verbose

Print filename headers, even for only one file.

Examples

Display the first 20 lines of phone_list :

    head -n 20 phone_list

Display the first 10 phone numbers having a 202 area code:

    grep '(202)' phone_list | head

Name

hexdump

Synopsis

    hexdump [options]file

GNU/Linux and Mac OS X only. Display specified file or input in hexadecimal, octal, decimal, or ASCII format. Option flags specify the display format.

Options

-b

Use a one-byte octal display, meaning the input offset is in hexadecimal and followed by sixteen three-column octal data bytes, filled in with zeroes and separated by spaces.

-c

Use a one-byte character display, meaning the input offset is in hexadecimal and followed by sixteen three-column entries, filled in with zeroes and separated with spaces.

-C

Canonical mode. Display hexadecimal offset, two sets of eight columns of hexadecimal bytes, then a | followed by the ASCII representation of those same bytes.

-d

Use a two-byte decimal display. The input offset is again in hexadecimal, but the display has only eight entries per line, of five columns each, containing two bytes of unsigned decimal format.

-e format_string

Choose a format string to be used to transform the output data. Format strings consist of:

Iteration count

The iteration count is optional. It determines the number of times to use the transformation string. The number should be followed by a slash character (/) to distinguish it from the byte count.

Byte count

The number of bytes to be interpreted by the conversion string. It should be preceded by a slash character to distinguish it from the iteration count.

Format characters

The actual format characters should be surrounded by quotation marks and are interpreted as printf(3) formatting strings (see also printf), although the *, h, l, n, p, and q options will not work as expected. Format string usage is discussed at greater length in the hexdump manpage.

-f filename

Choose a file that contains several format strings. The strings should be separated by newlines; the # character marks a line as a comment.

-n length

Limit the number of bytes of input to be interpreted.

-o

Two-byte octal display, meaning a hexadecimal offset followed by eight five-column data entries of two bytes each, in octal format.

-s offset

Skip to specified offset. The offset number is assumed to be decimal unless it starts with 0x or 0X (hexadecimal), or O (octal). Numbers may also be designated in megabytes, kilobytes, or half-kilobytes with the addition of m, k, or b at the end of the number.

-v

Display all input data, even if it is the same as the previous line. Normally, a duplicate line is replaced by an asterisk (*).

-x

Display data in a two-byte hexadecimal format. The offset is, as usual, in hexadecimal, and is followed by eight space-separated entries, each of which contains four-column, two-byte chunks of data in hexadecimal format.

Name

hostname

Synopsis

    hostname [option] [nameofhost]

Set or print name of current host system. A privileged user can set the hostname with the nameofhost argument.

Mac OS X accepts the -s option.

GNU/Linux Options

-a, --alias

Display the alias name of the host (if used).

-d, --domain

Print DNS domain name.

-f, --fqdn, --long

Print fully qualified domain name.

-Ffile, --filefile

Consult file for hostname.

-i, --ip-address

Display the IP address(es) of the host.

-n, --node

Display or set the DECnet node name. Not available on all systems. (And not terribly useful even on those systems that have it.)

-s, --short

Trim domain information from the printed name.

-v, --verbose

Verbose mode.

-y, --yp, --nis

Display the NIS domain name. A privileged user can set a new NIS domain name with nameofhost.

Name

iconv

Synopsis

    iconv [options] -f from_encoding -t to_encoding [file]

Convert the contents of file from one character set to another.

Common Options

-c

Omit invalid output characters.

-fcode1, --from-code=code1

Convert input characters from the code1 encoding.

-l, --list

Print a list of valid encodings to standard output.

-s, --silent

Operate silently; don't print warning messages.

-tcode2, --to-code=code2

Convert input characters to the code2 encoding.

GNU/Linux Options

-ofile, --output=file

Write the converted output to file instead of standard output.

--usage

Print a brief usage message showing only the command syntax and then exit.

-V, --version

Print version information and exit.

--verbose

Operate verbosely; print progress messages.

-?, --help

Print a help message and exit.

Name

id

Synopsis

    id [options] [username]

Display information about yourself or another user: user ID, group ID, effective user ID and group ID if relevant, and additional group IDs.

Common Options

-g, --group

Print group ID only.

-G, --groups

Print supplementary groups only.

-n, --name

With -u, -g, or -G, print user or group name, not number.

-r, --real

With -u, -g, or -G, print real, not effective, user ID or group ID.

-u, --user

Print user ID only.

Solaris Option

-a

/usr/bin/id: list all groups.

GNU/Linux Options

-a

Ignored; for compatibility with other systems.

-Z, --context

Print the security context. SELinux only.

Mac OS X Option

-P

Print information as an /etc/passwd entry.

Name

info

Synopsis

    info [options] [topics]

GNU hypertext documentation reader. Display online documentation previously built from Texinfo input. Info files are arranged in a hierarchy and can contain menus for subtopics. When entered without options, the command displays the top-level Info file (usually /usr/local/info/dir). When topics are specified, find a subtopic by choosing the first topic from the menu in the top-level Info file, the next topic from the new menu specified by the first topic, and so on. The initial display can also be controlled by the -f and -n options. If a specified topic has no Info file but does have a manpage, info displays the manpage; if there is neither, the top-level Info file is displayed.

URL: http://www.gnu.org/software/texinfo.

Options

--apropos string

Find string in the indexes of all manuals.

-ddirectories, --directorydirectories

Search directories, a colon-separated list, for info files. If this option is not specified, use the INFOPATH environment variable or the default directory (usually /usr/share/info or /usr/local/info).

--dribble file

Store each keystroke in file, which can be used in a future session with the --restore option to return to this place in info.

-ffile, --filefile

Display specified Info file.

--index-search string

Find the index entry string and go to the node it points to.

-nnode, --nodenode

Display specified node in the Info file.

-ofile, --outputfile

Copy output to file instead of displaying it at the screen.

-O, --show-options, --usage

Go to the node for command-line options.

--restore file

When starting, execute keystrokes in file.

-R, --raw-escapes

Do not remove formatting escape sequences from manpages.

--subnodes

Display subtopics.

--vi-keys

Use vi-like key bindings.

Name

join

Synopsis

    join [options]file1 file2

Join the common lines of sorted file1 and sorted file2. Read standard input if file1 is -. The output contains the common field and the remainder of each line from file1 and file2. In the options below, n can be 1 or 2, referring to file1 or file2.

Common Options

-a filenum

List unpairable lines in file filenum. Use -a 1 -a 2 to list unpairable lines from both files.

-e string

Replace any empty output field with the string string.

-o n.m

Each output line contains fields specified by file number n and field number m. The common field is suppressed unless requested.

-t c

Use character c as field separator for input and output.

-v n

Print only the unpairable lines in file n. With both -v 1 and -v 2, all unpairable lines are printed.

-1 m

Join on field m of file 1. Fields start with 1.

-2 m

Join on field m of file 2. Fields start with 1.

Solaris and GNU/Linux Option

-j fieldnum

Equivalent to -1 fieldnum -2 fieldnum.

Solaris Options

-j1 fieldnum

Equivalent to -1 fieldnum.

-j2 fieldnum

Equivalent to -2 fieldnum.

GNU/Linux Option

-i, --ignore-case

Ignore case differences when comparing keys.

Examples

Assuming the following input files:

    $ cat score
    olga    81      91
    rene    82      92
    zack    83      93
    $ cat grade
    olga    B       A
    rene    B       A

List scores followed by grades, including unmatched lines:

    $ join -a1 score grade
    olga 81 91 B A
    rene 82 92 B A
    zack 83 93

Pair each score with its grade:

    $ join -o 1.1 1.2 2.2 1.3 2.3 score grade
    olga 81 B 91 A
    rene 82 B 92 A

Name

kill

Synopsis

    kill [options]IDs

Terminate one or more process IDs. You must own the process or be a privileged user. This command is similar to the kill command that is built in to the Bash, Korn, and C shells. A minus sign before an ID specifies a process group ID. (The built-in version doesn't allow process group IDs, but it does allow job IDs.)

The command kill -l prints a list of the available signal names. The list varies by system architecture; for a PC-based system, it looks like this:

    $ kill -l
                     From Bash on GNU/Linux
     1) SIGHUP       2) SIGINT       3) SIGQUIT      4) SIGILL
     5) SIGTRAP      6) SIGABRT      7) SIGBUS       8) SIGFPE
     9) SIGKILL     10) SIGUSR1     11) SIGSEGV     12) SIGUSR2
    13) SIGPIPE     14) SIGALRM     15) SIGTERM     17) SIGCHLD
    18) SIGCONT     19) SIGSTOP     20) SIGTSTP     21) SIGTTIN
    22) SIGTTOU     23) SIGURG      24) SIGXCPU     25) SIGXFSZ
    26) SIGVTALRM   27) SIGPROF     28) SIGWINCH    29) SIGIO
    30) SIGPWR      31) SIGSYS      33) SIGRTMIN    34) SIGRTMIN+1
    35) SIGRTMIN+2  36) SIGRTMIN+3  37) SIGRTMIN+4  38) SIGRTMIN+5
    39) SIGRTMIN+6  40) SIGRTMIN+7  41) SIGRTMIN+8  42) SIGRTMIN+9
    43) SIGRTMIN+10 44) SIGRTMIN+11 45) SIGRTMIN+12 46) SIGRTMIN+13
    47) SIGRTMIN+14 48) SIGRTMIN+15 49) SIGRTMAX-15 50) SIGRTMAX-14
    51) SIGRTMAX-13 52) SIGRTMAX-12 53) SIGRTMAX-11 54) SIGRTMAX-10
    55) SIGRTMAX-9  56) SIGRTMAX-8  57) SIGRTMAX-7  58) SIGRTMAX-6
    59) SIGRTMAX-5  60) SIGRTMAX-4  61) SIGRTMAX-3  62) SIGRTMAX-2
    63) SIGRTMAX-1  64) SIGRTMAX

The signals and their numbers are defined in the C <signal.h> header file. This file may include others, thus the actual location varies across systems. They are shown in the following table. (Note: you should not include these files directly; rather, always use <signal.h> in your C or C++ programs.) Look in your system's file to find the signals that apply to your system.

System

File

Solaris

/usr/include/sys/iso/signal_iso.h

GNU/Linux

/usr/include/bits/signum.h

Mac OS X

/usr/include/sys/signal.h

Common Options

-l[status]

List the signal names. (Used by itself.) The optional status is a numeric exit value from a process killed by a signal; kill will indicate which signal it was.

-s signal

Send signal signal to the given process or process group. The signal number (from <signal.h>) or name (from kill -l). With a signal number of 9, the kill is absolute.

- signal

Send signal signal to the given process or process group. signal may be either a signal name or a signal number.

GNU/Linux Options

-a

Kill all processes of the given name (if privileges allow), not just processes with the same UID. To use this option, specify the full path (e.g., /bin/kill -a gcc).

-p

Print the process ID of the named process, but do not send it a signal. In order to use this option, specify the full path (e.g., /bin/kill -p).

Name

ksh

Synopsis

    ksh [options] [arguments]

Korn shell command interpreter. See Chapter 4 for more information, including command-line options.

Name

ld

Synopsis

    ld [options]objfiles

Combine several objfiles, in the specified order, into a single executable object module (a.out by default). ld is the loader and is usually invoked automatically by compiler commands such as cc.

Solaris: ld is in /usr/ccs/bin.

Tip

Options for ld vary wildly across systems. Furthermore, in the 21st century, no matter what system you work on, the loader is one of the most complicated commands. We have chosen here to document only those options that are commonly available. You will need to check your local documentation for complete information.

Options

-e symbol

Set symbol as the address of the output file's entry point.

-l x

Search a library named lib x .so or lib x .a (the placement of this option on the line affects when the library is searched).

-L dir

Search directory dir before standard search directories (this option must precede -l).

-o file

Send the output to file (default is a.out).

-r

Allow output to be subject to another ld. (Retain relocation information.)

-R path

Record the colon-separated list of directories in path in the object file for use by the runtime loader. Multiple instances may be supplied; the values are concatenated together.

-s

Remove (strip) symbol table and relocation entries.

-u symbol

Enter symbol in symbol table; useful when loading from an archive library. symbol must precede the library that defines it (so -u must precede -l).

Name

ldd

Synopsis

    ldd [options]file

Solaris and GNU/Linux only. List dynamic dependencies: that is, list shared objects that would be loaded if file were executed. (If a valid file needs no shared objects, ldd succeeds but produces no output.) In addition, ldd's options can show unresolved symbol references that result from running file.

Options

Specify only one of these options:

-d, --data-relocs

Check references to data objects only.

-r, --function-relocs

Check references to data objects and to functions.

Solaris Options

-c

Disables the use of configuration files; see crle(1).

-e envar

Set the environment variable envar. Useful for experimenting with environment variables that affect ldd without having to change the global environment.

-f

Force checking of nonsecure executables. This option is dangerous if running as a privileged user.

-i

Print the execution order of initialization sections.

-l

Do immediate processing of any filters, to list all "filtees" and their dependencies.

-L

Enable lazy loading.

-s

Display the search path for shared object dependencies.

-u

Display unused objects. Mutually exclusive with -U.

-U

Display unused objects and dependencies. This is a superset of -u and is mutually exclusive with it.

-v

Display all dependency relationships and version requirements.

GNU/Linux Options

-v, --verbose

Print all information.

-V, --version

Display ldd's version.

Name

less

Synopsis

    less [options] [filename]

less is a program for paging through files or other output. It was written in reaction to the perceived primitiveness of more (hence its name). Some commands may be preceded by a number.

URL: http://www.greenwoodsoftware.com/less.

The lesskey command configures keybindings for less. See lesskey(1) for more information on it.

Options

-[z]num, --window=num

Set number of lines to scroll to num. Default is one screenful. A negative num sets the number to num lines less than the current number.

+[+]command

Run command on startup. If command is a number, jump to that line. The option ++ applies this command to each file in the command-line list.

-?, --help

Print help screen. Ignore all other options; do not page through file.

-a, --search-screen

When searching, begin after last line displayed. (Default is to search from second line displayed.)

-bbuffers, -buffers=buffers

Use buffers buffers for each file (default is 10). Buffers are 1 KB in size.

-B, --auto-buffers

Do not automatically allocate buffers for data read from a pipe. If -b specifies a number of buffers, allocate that many. If necessary, allow information from previous screens to be lost.

-c, --clear-screen

Redraw screen from top, not bottom.

-C, -CLEAR-SCREEN

Redraw screen by clearing it and then redrawing from top.

-d, --dumb

Suppress dumb-terminal error messages.

-e, --quit-at-eof

Automatically exit after reaching EOF twice.

-E, --QUIT-AT-EOF

Automatically exit after reaching EOF once.

-f, --force

Force opening of directories and devices; do not print warning when opening binaries.

-F, --quit-if-one-screen

Exit without displaying anything if first file can fit on a single screen.

-g, --hilite-search

Highlight only string found by past search command, not all matching strings.

-G, --HILITE-SEARCH

Never highlight matching search strings.

-hnum, --max-back-scroll=num

Never scroll backward more than num lines at once.

-i, --ignore-case

Make searches case-insensitive, unless the search string contains uppercase letters.

-I, --IGNORE-CASE

Make searches case-insensitive, even when the search string contains uppercase letters.

-jnum, --jump-target=num

Position target line on line num of screen. Target line can be the result of a search or a jump. Count lines beginning from 1 (top line). A negative num is counted backward from bottom of screen.

-J, --status-column

Used with -w or -W, highlight a single column on the left edge of the screen instead of the whole text of an unread line.

-kfile, --lesskey-file=file

Read file to define special key bindings.

-K charset

Use the specified charset.

-m, --long-prompt

Display more-like prompt, including percent of file read.

-M

Prompt more verbosely than with -m, including percentage, line number, and total lines.

-n, --line-numbers

Do not calculate line numbers. Affects -m and -M options and = and v commands (disables passing of line number to editor).

-N, --LINE-NUMBERS

Print line number before each line.

-ofile, --log-file=file

When input is from a pipe, copy output to file as well as to screen. (Prompt for overwrite authority if file exists.)

-Ofile, --LOG-FILE=file

Similar to -o, but do not prompt when overwriting file.

-ppattern, --pattern=pattern

At startup, search for first occurrence of pattern.

-P[mM=]prompt

Set the prompt displayed by less at the bottom of each screen to prompt. The m sets the prompt invoked by the -m option, the M sets the prompt invoked by the -M option, and the = sets the prompt invoked by the = command. Special characters (described in the manpage for less), can be used to print statistics and other information in these prompts.

-q, --quiet, --silent

Disable ringing of bell on attempts to scroll past EOF or before beginning of file. Attempt to use visual bell instead.

-Q, --QUIET, --SILENT

Never ring terminal bell.

-r, --raw-control-chars

Display "raw" control characters instead of using ^x notation. This sometimes leads to display problems, which might be fixed by using -R instead.

-R, --RAW-CONTROL-CHARS

Like -r, but adjust screen to account for presence of control characters.

-s, --squeeze-blank-lines

Print successive blank lines as one line.

-S, --chop-long-lines

Cut, do not fold, long lines.

-ttag, --tag=tag

Edit file containing tag. Consult ./tags (constructed by ctags).

-Tfile, --tag-file=file

With the -t option or :t command, read file instead of ./tags.

-u, --underline-special

Treat backspaces and carriage returns as printable input.

-U, --UNDERLINE-SPECIAL

Treat backspaces and carriage returns as control characters.

-V, --version

Display version and exit.

-w, --hilite-unread

Show the line to which a movement command has skipped, phrases displayed by a search command, or the first unread line during a normal scroll by highlighting text in reverse video.

-W, --HILITE-UNREAD

Show phrases displayed by a search command, or the first unread line of any forward movement that is more than one line, by highlighting text in reverse video.

-xn, --tabs=n

Set tab stops to every n characters. Default is 8.

-X, --no-init

Do not send initialization and deinitialization strings from termcap to terminal.

-yn, --max-forw-scroll=n

Never scroll forward more than n lines at once.

Prompts

The prompt interprets certain sequences specially. Those beginning with % are always evaluated. Those beginning with ? are evaluated if certain conditions are true. Some prompts determine the position of particular lines on the screen. These sequences require that a method of determining that line be specified. See the -P option and the manpage for more information.

Name

lex

Synopsis

    lex [options] [files]

Generate a lexical analysis program (named lex.yy.c) based on the regular expressions and C statements contained in one or more input files. On GNU/Linux and Mac OS X, lex is actually flex. See also yacc, bison, flex, and lex & yacc, which is listed in the Bibliography.

Options

The -e and -w options may not be available on other Unix systems where lex is the original Unix version.

-c

file's program statements are in C (default).

-e

Handle EUC (Extended Unix Code, i.e., eight-bit) characters. Mutually exclusive with -w. This gives yytext[] type unsigned char.

-n

Suppress the output summary.

-Q c

Print version information in lex.yy.c (if c = y) or suppress information (if c = n, the default).

-t

Write program to standard output, not lex.yy.c.

-v

Print a summary of machine-generated statistics.

-V

Print version information on standard error.

-w

Handle EUC (eight-bit or wider) characters. Mutually exclusive with -e. This gives yytext[] type wchar_t.

Name

link

Synopsis

    link file1 file2

Create a link between two files. This is the same as the ln command, but it has no error checking because it uses the link(2) system call directly.

Name

ln

Synopsis

    ln [options] existing new
    ln [options]files directory

Create pseudonyms (links) for files, allowing them to be accessed by different names. In the first form, link existing to new, where new is usually a new filename. If new is an existing file, it is removed first; if new is an existing directory, a link named existing is created in that directory. In the second form, create links in directory, each link having the same name as the file specified.

Common Options

-f, --force

Force the link to occur (don't prompt for overwrite permission).

-s, --symbolic

Create a symbolic link. This lets you link across filesystems and also see the name of the link when you run ls -l. (Otherwise, you have to use find -inum to find any other names a file is linked to.)

Solaris Option

-n

/usr/bin/ln: Do not overwrite existing files.

GNU/Linux and Mac OS X Options

-i, --interactive

Prompt for permission before removing files.

-v, --verbose

Verbose mode. List files as they are processed.

GNU/Linux Options

-b, --backup[=control]

Back up any existing files. When using the long version of the option, the optional control parameter controls the kind of backup. When no control is specified, ln attempts to read the control value from the VERSION_CONTROL environment variable. Accepted values are:

none, off

Never make backups.

numbered, t

Make numbered backups.

existing, nil

Match existing backups, numbered or simple.

simple, never

Always make simple backups.

-d, -F, --directory

Allow hard links to directories. Available to privileged users.

-n, --no-dereference

Replace symbolic links to directories instead of dereferencing them. --force is useful with this option.

-Ssuffix, --suffix=suffix

Append suffix to files when making backups, instead of the default ~.

--target-directory= directory

Create links in the specified directory.

Mac OS X Options

-h

Do not follow symbolic links for the target file or directory. Useful with -f to replace a symbolic link that may point to a directory.

-n

Same as -h.

Name

locale

Synopsis

    locale [options] [name ...]

Print locale-specific information. With no arguments, locale summarizes the current locale. Depending on the arguments, locale prints information about entire locale categories or the value of specific items within a locale. A public locale is one an application can access.

Options

-a, --all-locales

Print information about all available public locales. The POSIX locale should always be available.

-c, --category-name

Provide information about the locale category name. Useful with or without -k.

-k, --keyword-name

Print the names and values of the given locale keywords.

-m, --charmaps

Print the names of the available charmaps.

Environment variables

LANG

The default value for unset internationalization variables. If not set, the system's default value is used.

LC_ADDRESS

Postal settings, country, and language names and abbreviation.

LC_ALL

When set, overrides the values of all other internationalization variables.

LC_COLLATE

String and character sorting and comparison settings.

LC_CTYPE

Character attributes, including case conversion mappings, and categories of characters (whitespace, digit, lower, upper, punctuation, etc.).

LC_IDENTIFICATION

Information related to the current locale definition, including its title, source, revision, and contact information for its author.

LC_MEASUREMENT

Measurement units, metric or other.

LC_MESSAGES

Settings for yes/no prompts and other informative and diagnostic messages.

LC_MONETARY

Currency formats and symbols.

LC_NAME

Formats for names and honorifics.

LC_NUMERIC

Nonmonetary number formats.

LC_PAPER

Default paper sizes for printing and pagination.

LC_TELEPHONE

Telephone number formats.

LC_TIME

Date and time formats.

NLSPATH

The path for finding message catalogues used in processing messages.

Examples

Print the category name and all keywords for date and time settings:

    locale -ck LC_TIME

Print the strings used for days of the week and months of the year:

    locale day mon

Name

locate

Synopsis

    locate [options] [pattern]

Search database(s) of filenames and print matches. *, ?, [, and ] are treated specially; / and . are not. Matches include all files that contain pattern unless pattern includes metacharacters, in which case locate requires an exact match.

Solaris does not provide this command. Mac OS X uses the original BSD version of this command that takes no options. For details on the GNU/Linux version of this command, see the slocate entry in the later section "Alphabetical Summary of GNU/Linux Commands."

Name

logger

Synopsis

    logger [options] [messages]

Log messages to the system log. Command-line messages are logged if provided. Otherwise, messages are read and logged, line-by-line, from the file provided via -f. If no such file is given, logger reads messages from standard input.

Common Options

-f file

Read and log messages from file.

-i

Log the process ID of the logger process with each message.

-p priority

Log each message with the given priority. Priorities have the form facility . level. The default is user.notice. See syslog (3) for more information.

-t tag

Add tag to each message line.

Mac OS X and GNU/Linux Option

-s

Send the message to standard error, in addition to sending it to the system log.

GNU/Linux Options

-d

When using a specified socket with -u, use a datagram socket instead of stream socket.

-u socket

Write to socket instead of to the system log.

Example

Warn about upcoming trouble:

    logger -p user.emerg 'Incoming Klingon battleship!'

Name

login

Synopsis

    login [options] [user]

Sign on and identify yourself to the system. At the beginning of each terminal session, the system prompts you for your username and, if relevant, a password. The options aren't normally used.

Bash, the Korn shell, and the C shell have their own, built-in versions of login. See Chapters 4 and 5 for more information.

Common Options

-hhost[term]

Used for remote logins via telnet to indicate the login is from host host and that the user's terminal type is term.

-p

Pass the current environment to the new login session.

Solaris Options

user

Sign on as user (instead of being prompted).

-d tty

Specify the pathname of the tty that serves as the login port.

-r host

Used for remote logins via rlogin to indicate the login is from host host.

-R repository

Use the PAM repository repository for the identity provided with -u.

-s service

Use the PAM service service. Usually not needed, but is useful, for example, with Kerberized logins.

-u identity

Provides the identity string for the user; this is usually different from the login name. In Kerberos it's the user's principal name.

-U ruser

The name of the remote person attempting a remote login. Used by in.rlogind in Kerberized mode.

var = value

When specified after the username, assign a value to one or more environment variables. PATH and SHELL can't be changed.

value

Pass values into the environment. Each value that does not contain an = is assigned to a variable of the form L n, where n starts at 0 and increments by one.

Mac OS X and GNU/Linux Option

-f

Assume authentication has already been done. May be used only by a privileged user. The GNU/Linux login(1) manpage indicates that this option does not work well under GNU/Linux.

Name

logname

Synopsis

    logname

Display your login name. The command looks the user up in the system's database of currently logged in users. It ignores both the LOGNAME and USER environment variables. See also whoami.

Name

look

Synopsis

    look [options] string [file]

Look through a sorted file and print all lines that begin with string. string may be up to 256 characters long. This program is potentially faster than fgrep because it relies on the file being already sorted, and can thus do a binary search through the file, instead of reading it sequentially from beginning to end.

With no file, look searches /usr/share/lib/dict/words (the spelling dictionary) with options -df.

Common Options

-d

Use dictionary order. Only letters, digits, space, and tab are used in comparisons.

-f

Fold case; ignore case distinctions in comparisons.

-t char

Use char as the termination character, i.e., ignore all characters to the right of char.

GNU/Linux Option

-a

Use alternate dictionary /usr/share/dict/web2.

Name

lp

Synopsis

    lp [options] [files]

Send files to the printer. With no arguments, prints standard input. To print standard input along with other files, specify - as one of the files.

Common Options

-c

Copy files to print spooler; if changes are made to file while it is still queued for printing, the printout is unaffected.

-d dest

Send output to destination printer named dest.

-d any

Used after -f or -S to print the request on any printer that supports the given form or character set.

-H action

Print according to the named action : hold (notify before printing), resume (resume a held request), immediate (print next; privileged users only). Mac OS X and GNU/Linux also allow restart with -i to restart a completed job.

-i IDs

Override lp options used for request IDs currently in the queue; specify new lp options after -i. For example, change the number of copies sent.

-m

Send mail after files are printed.

-n number

Specify the number of copies to print.

-o options

Set one or more printer-specific options. Standard options include:

cpi= n

Print n characters per inch. n can also be pica, elite, or compressed.

lpi= n

Print n lines per inch.

length= n

Print pages n units long; e.g., 11i (inches), 66 (lines).

nobanner

Omit banner page (separator) from request.

nofilebreak

Suppress formfeeds between files.

width= n

Print pages n units wide; e.g., 8.5i (inches), 72 (columns).

stty= list

Specify a quoted list of stty options.

-P list

Print only the page numbers specified in list.

-q n

Print request with priority level n (39 = lowest).

-s

Suppress messages.

-t title

Use title on the printout's banner page.

-w

Write a message on the user's terminal after files are printed (same as -m if user isn't logged on).

Solaris Options

-f name

Print request on preprinted form name. name references printer attributes set by the administrative command lpforms.

-p

Enable notification of completion of the print job.

-r

Don't adapt request if content isn't suitable; reject instead. (Obscure; used only with -T.)

-S name

Use the named print wheel or character set for printing.

-T content

Send request to a printer that supports content (default is simple; an administrator sets content via lpadmin -I).

-y modes

Print according to locally defined modes.

GNU/Linux and Mac OS X Options

GNU/Linux and Mac OS X use CUPS, the Common Unix Printing System. See http://www.cups.org for more information. Besides the common options, the CUPS lp accepts the following:

-E

Use encryption when connecting to the server.

-h host

Provide the print server hostname. The default is localhost or the value of $CUPS_SERVER.

Examples

Send mail after printing five copies of report :

    lp -n 5 -m report

Format and print thesis; print title too:

    nroff -ms thesis | lp - title

Name

lpq

Synopsis

    lpq [options] [jobid]

Check the print spool queue for status of print jobs. For each job, display username, rank in the queue, filenames, job number, and total file size (in bytes).

On Solaris, this is the original BSD interface, in /usr/ucb/lpq; see lpq(1B) for more information. This entry documents the CUPS version, which is used on GNU/Linux and Mac OS X. See also lpr.

Options

-a

Report on all printers.

-E

Encrypt the connection to the server.

-l

Verbose mode. Print information about each file comprising a job. Use -l multiple times to increase the information provided.

-P printer

Specify which printer to query. Without this option, lpq uses the printer set in the PRINTER or other printer-related environment variables or the default system printer.

+ interval

Print the status every interval seconds until the queue is empty.

Name

lpr

Synopsis

    lpr [options] [files]

Send files to the printer. On Solaris, this is the original BSD interface, in /usr/ucb/lpr; see lpr(1B) for more information. This entry documents the CUPS version, which is used on GNU/Linux and Mac OS X.

URL: http://www.cups.org. By default, CUPS makes its online documentation available via web browser at http://localhost:631/documentation.html.

Options

-# count

Print count copies (100 maximum).

-C name

Set the job name.

-E

Encrypt the connection to the server.

-J name

Same as -C.

-l

The print file is in binary form, ready to be printed. Do not apply any filtering. Equivalent to -oraw.

-o option

Set a job option. See the online documentation for more details.

-p

Supply a shaded header with the date, time, job name, and page number. Equivalent to -oprettyprint.

-P destination

Print files to the named printer.

-r

Remove the files after printing them.

-T name

Same as -C.

The original BSD and LPRng lpr options -c, -d, -f, -g, -i, -m, -n, -t, -v, and -w are not supported and produce a warning message if used.

Name

lprm

Synopsis

    lprm [options] [jobid]

Remove a print job from the print spool queue. You must specify a job number or numbers, which can be obtained from lpq. Only a privileged user may remove files belonging to another user.

On Solaris, this is the original BSD interface, in /usr/ucb/lprm; see lprm(1B) for more information. This entry documents the CUPS version, which is used on GNU/Linux and Mac OS X. See also lpr.

Options

-E

Encrypt the connection to the server.

-P printer

Specify printer queue. Normally, the default printer or printer specified in the PRINTER environment variable is used.

-

Cancel all jobs.

Name

lpstat

Synopsis

    lpstat [options]

Print the lp print queue status. With options that take a list argument, omitting the list produces all information for that option. list can be separated by commas or, if enclosed in double quotes, by spaces.

Common Options

-a[list]

Show if the list of printer or class names is accepting requests.

-c[list]

Show information about printer classes named in list.

-d

Show the default printer destination.

-l

Use after -f to describe available forms, after -p to show printer configurations, or, on Solaris, after -S to describe printers appropriate for the specified character set or print wheel.

-o[list]

Show the status of output requests. list contains printer names, class names, or request IDs.

-p[list]

Show the status of printers named in list.

-r

Show whether the print scheduler is on or off.

-R

Show the job's position in the print queue.

-s

Summarize the print status (shows almost everything).

-t

Show all status information (reports everything).

-u[list]

Show request status for users on list. list can be:

user

user on local machine

all

All users on all systems

host ! user

user on machine host

host !all

All users on host

all! user

user on all systems

all!all

All users on all systems

-v[list]

Show device associated with each printer named in list.

Solaris Options

-D

Use after -p to show a brief printer description.

-f[list]

Verify that the list of forms is known to lp.

-S[list]

Verify the list of character sets or print wheels is known to lp.

GNU/Linux and Mac OS X Options

GNU/Linux and Mac OS X use CUPS, the Common Unix Printing System. See http://www.cups.org for more information. Besides the common options, the CUPS lpstat accepts the following:

-E

Use encryption when connecting to the server.

-h host

Provide the print server hostname. The default is localhost or the value of $CUPS_SERVER.

-W which

Show which jobs. The valid values include completed and not-completed. Use before -o and/or any printer names.

Name

ls

Synopsis

    ls [options] [names]

If no names are given, list the files in the current directory. With one or more names, list files contained in a directory name or that match a file name. The options let you display a variety of information in different formats. The most useful options include -F, -R, -a, -l, and -s. Some options don't make sense together; e.g., -u and -c.

Tip

Modern versions of ls pay attention to the LC_COLLATE environment variable. Its default value, en_US, (in the United States) causes ls to sort in dictionary order (i.e., ignoring case). You may prefer to set LC_COLLATE to C to restore the traditional Unix behavior of sorting in ASCII order.

Common Options

-a, --all

List all files, including the normally hidden . files.

-A, --almost-all

Like -a, but exclude . and .. (the current and parent directories).

-b, --escape

Show nonprinting characters in octal.

-c, --time-ctime, --time=status

List files by inode modification time.

-C, --format=vertical

List files in columns (the default format, when displaying to a terminal device).

-d, --directory

List only the directory's information, not its contents. (Most useful with -l and -i.)

-f

Interpret each name as a directory (files are ignored).

-F, --classify, --indicator-style=classify

Flag filenames by appending / to directories, > to doors (Solaris only), * to executable files, | to FIFOs, @ to symbolic links, and = to sockets.

-g

Like -l, but omit owner name (show group).

-h

Produce "human-readable" output, using abbreviations for kilobyte, megabyte, and so on.

-H, --dereference-command-line

If an argument on the command line is a symbolic link, list the file or directory referenced by a symbolic link rather than the link itself.

-i, --inode

List the inode number for each file.

-l, --format=long, --format=verbose

Long format listing (includes permissions, owner, size, modification time, etc.).

-L

List the file or directory referenced by a symbolic link rather than the link itself.

-m, --format=commas

Merge the list into a comma-separated series of names.

-n, --numeric-uid-gid

Like -l, but use user ID and group ID numbers instead of owner and group names.

-p, --filetype, --indicator-style=file-type

Mark directories by appending / to them. GNU/Linux also appends | to FIFOs, @ to symbolic links, and = to sockets. (Almost, but not quite, the same as -F.)

-q, --hide-control-chars

Show nonprinting characters as ?.

-r, --reverse

List files in reverse order (by name or by time).

-R, --recursive

Recursively list subdirectories as well as current directory.

-s, --size

Print sizes of the files in blocks.

-t, --sort=time

List files according to modification time (newest first).

-u, --time=atime, --time=access, --time=use

List files according to the file access time.

-x, --format=across, --format=horizontal

List files in rows going across the screen.

-1, --format=single-column

Print one entry per line of output.

Solaris and GNU/Linux Option

-o

Like -l, but omit group name (show owner).

Solaris Options

-e

Like -l, but use the same format for times regardless of age: mmm dd hhh:mm:ss yyyy.

-E

Like -l, but use the ISO 8601 format for times regardless of age: yyyy-mm-dd hh:mm:ss.nnnnnnnnn.

-@

Like -l, but extended attribute information supersedes ACL information. ls places an @ after the permission bits for files with extended attributes.

GNU/Linux Options

--author

Print the author of each file. On GNU/Hurd systems, the author is different from the owner. On all other systems, this prints the file's owner.

--block-size= size

Use blocks of size bytes.

-B, --ignore-backups

Do not list files ending in ~ unless given as arguments.

--color[=when]

Colorize the names of files depending on the type of file. Accepted values for when are never, always, or auto.

--dereference-command-line-symlink-to-dir

Follow command-line argument symbolic links that point to directories.

-D, --dired

List in a format suitable for Emacs dired mode.

--full-time

List times in full, rather than using the standard abbreviations.

-G, --no-group

In long format, do not display group name.

--indicator-style= style

Add trailing indicators to filenames according to style. Possible values are none, classify (same as -F), and file-type (same as -p). Default is none.

-Ipattern, --ignorepattern

Do not list files whose names match the shell pattern pattern unless they are given on the command line.

-k, --kilobytes

If file sizes are being listed, print them in kilobytes. This option overrides the environment variable POSIXLY_CORRECT.

--lcontext

Display the full security context. Implies -l. SELinux only.

-N, --literal

Display special graphic characters that appear in filenames.

--quoting-style= style

Use the style quoting style. Possible values are: c, escape, literal, locale, shell, and shell-always.

-Q, --quote-name

Quote filenames with "; quote nongraphic characters.

--scontext

Display only the filename and the security context. SELinux only.

--show-control-chars

Show nonprinting characters verbatim (default for printing to a file).

--si

Similar to -h, but uses powers of 1000 instead of 1024.

--sort= criteria

Sort by the given criteria. Possible values and their corresponding options are: access (-u), atime (-u), extension (-X), none (-U), size (-S), status (-c), time (-t), use (-u), and version (-v).

-S, --sort=size

Sort by file size, largest to smallest.

--time= filetime

Show the given time attribute of the file instead of the modification time. Allowed values are: atime, access, use, ctime, and status. The time attribute is used for sorting with --sort=time.

--time-style= style

Format times according to the given style. If style is preceded by posix-, then the style is used only if not in the POSIX locale. Allowed values are: full-iso, iso, locale, long-iso, and + format.

For + format, the format is interpreted as for date (see date). Two formats may be provided separated by a newline. In this case, the first one applies to nonrecent files, and the second one applies to recent files.

-Tncols, --tabsize=ncols

Set tab stops at ncols columns.

-U, --sort=none

Do not sort files.

-v, --sort=version

Interpret the digits in names such as file.6 and file.6.1 as versions, and order filenames by version.

-wn, --width=n

Format output to fit n columns.

-X, --sort=extension

Sort by file extension, then by filename.

-Z, --context

Display the security context so that it will fit on the screen. The information given is the mode, user, group, security context, and filename. SELinux only.

Mac OS X Options

-B

Print nonprintable characters as an octal escape: \ nnn.

-e

Print the Access Control List (ACL) of the file, if any.

-G

Enable colorized output.

-k

For use with -s; print file sizes in kilobytes, not blocks. Overrides the BLOCKSIZE environment variable.

-o

Include the file flags in the long format listing (-l).

-P

Cancel the -H and -L options, causing ls to list information about symbolic links, not the files they point to.

-S

Sort files by their size.

-T

Use with -l. Print complete time information, including month, day, hour, minute, second, and year.

-w

Print nonprintable characters verbatim. This is the default if the output is not a terminal.

-W

Display whiteout entries when scanning directories.

-v

Print nongraphic characters verbatim. This is the default if the output is not a terminal.

Examples

List all files in the current directory and their sizes; use multiple columns and mark special files:

    ls -asCF

List the status of directories /bin and /etc :

    ls -ld /bin /etc

List C source files in the current directory, the oldest first:

    ls -rt *.c

Count the files in the current directory:

    ls | wc -l

Name

m4

Synopsis

    m4 [options] [files]

General purpose macro processor. On Solaris, m4 is found in /usr/ccs/bin and is the original Unix version. GNU/Linux and Mac OS X use the GNU version of m4. (On Solaris, GNU m4 is in /usr/sfw/bin/gm4.)

URL: http://www.gnu.org/software/m4.

Common Options

-B n

Set push-back and argument collection buffers to n (default is 4096). Ignored by GNU m4.

-Dname[=value], --define=name[=value]

Define name as value or, if value is not specified, define name as null.

-e, --interactive

Operate interactively, ignoring interrupts.

-Hn, --hashsize=n

Set symbol table hash array size to n (default is 199 on Solaris, 509 for GNU m4).

-s, --synclines

Enable line-sync output (#line directives) for the C preprocessor.

-S n

Set call stack size to n (default is 100 slots). Ignored by GNU m4.

-T n

Set token buffer size to n (default is 512 bytes). Ignored by GNU m4.

-Uname, --undefine=name

Undefine name.

GNU m4 Options

-d[flags], --debug[=flags]

Specify flag-level debugging. Default is flags aeq.

-E, --fatal-warnings

Consider all warnings to be fatal, and exit after the first of them.

-Ffile, --freeze-state=file

Record m4's frozen state in file for later reloading.

-G, --traditional

Behave like traditional m4, ignoring GNU extensions.

-Idirectory, --include=directory

Search directory for include files.

-ln, --arglength=n

Specify the length of debugging output.

-Ln, --nesting-limit=n

Limit the textual nesting of macro calls to n. The default is 250. Useful for some machine-generated input.

-ofile, --error-output=file

Place output in file. Despite the option's name, print error messages on standard error.

-P, --prefix-built-ins

Prepend m4_ to all built-in macro names.

-Q, --quiet, --silent

Suppress warning messages.

-Rfile, --reload-state=file

Load state from file before starting execution.

-tname, --trace=name

Insert name into symbol table as undefined. Trace macro from the point it is defined.

Name

mail

Synopsis

    mail [options] [users]

Read mail (if no users listed), or send mail to other users. Type ? for a summary of commands. Esoteric debugging options exist (not listed) for system administrators. See also mailx, and vacation in the later section "Alphabetical Summary of Solaris Commands."

Tip

This is the original V7 Unix mail program. On Mac OS X and GNU/Linux, mail is really mailx. See mailx.

Options for Sending Mail

-m type

Print a "Message-type:" line at the heading of the letter, followed by type of message.

-t

Print a "To:" line at the heading of the letter, showing the names of the recipients.

-w

Force mail to be sent to remote users without waiting for remote transfer program to complete.

Options for Reading Mail

-e

Test for the existence of mail without printing it. Exit status is 0 if mail exists; otherwise 1.

-f file

Read mail from alternate mailbox file.

-h

Display a window of messages rather than the latest message.

-p

Print all messages without pausing.

-P

Print messages with all header lines displayed.

-q

Terminate on an interrupt.

-r

Print oldest messages first.

Name

mailx

Synopsis

    mailx [options] [users]
    Mail [options] [users]

Read mail, or send mail to other users. For a summary of commands, type ? in command mode (e.g., when reading mail) or ~? in input mode (e.g., when sending mail). The start-up file .mailrc in the user's home directory is useful for setting display variables and for defining alias lists.

Version Names

The original V7 Unix mail program provided a very spartan interactive user interface.[*] This inspired the creation of Berkeley Mail, a more capable mail-reading program for BSD Unix. Not surprisingly, and because Unix systems distinguish between uppercase and lowercase, the program was named Mail, and it lived in the /usr/ucb directory. When the System V developers imported Berkeley Mail, they renamed it mailx, to avoid the case-distinction problem. By that name the command was standardized in POSIX. Today, just to keep life interesting, different systems offer the program under multiple names and locations, as follows:

Solaris

The program is in /usr/bin/mailx. /usr/ucb/mail and /usr/ucb/Mail are symbolic links to it.

GNU/Linux

The program is in /bin/mail. /usr/bin/Mail is a symbolic link to it. There is no mailx command.

Mac OS X

The program is in /usr/bin/mailx. /usr/bin/mail is a hard link to it. Because the Mac OS X HFS filesystem ignores case, /usr/bin/Mail is the same as /usr/bin/mail (i.e., typing Mail at a shell prompt runs /usr/bin/mail).

Common Options

-b address

Send blind carbon copies to address. Quote the list if there are multiple recipients.

-c address

Send carbon copies to address. Quote the list if there are multiple recipients.

-d

Set debugging.

-f[file]

Read mail in alternate file (default is mbox).

-i

Ignore interrupts (useful on modems); same as mailx option ignore.

-I

Use with -f when displaying saved news articles; newsgroup and article ID headers are included.

-n

Do not read the system startup mailx.rc or Mail.rc file(s).

-N

Don't print mail header summary.

-s sub

Place string sub in the Subject: header field. sub must be quoted if it contains whitespace.

-u user

Read user's mail.

-v

Verbose mode; displays delivery details.

Solaris and Mac OS X Options

-e

Test for the existence of mail without printing it. Exit status is 0 if mail exists; otherwise 1.

-F

Store message in a file named after the first recipient.

-H

Print mail header summary only.

Solaris Options

-B

Do not buffer standard input or standard output.

-H

Print mail header summary only.

-r address

Specify a return address for mail you send.

-t

Use To:, Cc:, and Bcc: headers in the input to specify recipients instead of command-line arguments.

-T file

Record message IDs and article IDs (of news articles) in file.

-U

Convert uucp-type addresses to Internet format.

-V

Print version number of mailx and exit.

-~

Process tilde escapes, even if not reading from a terminal.

Mac OS X Option

-E

Do not send messages with an empty body. Useful for receiving output from cron scripts.

[*] This program survives on commercial Unix systems as /bin/mail; its primary use these days is by Mail Transport Agents, such as Sendmail, for physical delivery of mail into a user's mailbox. Even long-time Unix veterans do not use it interactively.

Name

make

Synopsis

    make [options] [targets]

Update one or more targets according to dependency instructions in a description file in the current directory. By default, this file is called makefile or Makefile.

On Solaris make is found in /usr/ccs/bin, and GNU make is in /usr/sfw/bin/gmake. GNU/Linux and Mac OS X use GNU make. See Chapter 16 for more information on GNU make, including Internet download information. See also Managing Projects with GNU make, listed in the Bibliography.

Name

man

Synopsis

    man [options] [[section] subjects]

Display information from the online reference manual. Each subject is usually the name of a command from Section 1 of the online manual, unless you specify an optional section from 1 to 8. If you don't specify a subject, you must supply either a keyword (for -k) or a file (for -f). No options except -M can be used with -k or -f. The MANPATH environment variable defines the directories in which man searches for information (default is /usr/share/man). PAGER defines how output is sent to the screen. Note: in Solaris, section must be preceded by -s. GNU/Linux and Mac OS X use the same man program.

Options

-a

Show all pages matching subject.

-d

Debug; evaluate the man command and print debugging information, but don't execute.

-f files

Display a one-line summary of one or more reference files. Same as whatis.

-k keywords

Display any header line that contains one of the specified keywords. Same as apropos.

-M path

Search for online descriptions in directory path instead of default directory. -M overrides MANPATH.

-t

Format the manpages with troff.

Solaris Options

-

Pipe output through cat instead of more -s.

-F

Search MANPATH directories, not windex database.

-l

Like -a, but list only the pages.

-r

Reformat but don't display manpage. Same as man - -t.

-s section

Specify the section of the manpage to search in. Required for anything that isn't a command.

-T mac

Display information using macro package mac instead of tmac.an (the man macros).

GNU/Linux and Mac OS X Options

-c

Reformat the source file, even if a preformatted manual page exists.

-C file

Use an alternate configuration file.

-D

Like -d, but also print the manual page.

-F

Format only, do not display the formatted pages.

-h, --help

Print a command-line summary and exit.

-K

Search for a string in all manpages.

-m system

Search an alternate set of manpages based on the system name.

-p letters

Specify the order in which to run various troff preprocessors based on letters. The letters and their program are:

e: eqn or neqn

p: pic

t: tbl

g: grap

r: refer

v: vgrind

-P program

Use program as the pager.

-w, --path

Print the location of the manpage that would be displayed. With no argument, print the list of directories to be searched.

-W

Like -w, but print names one per line.

Examples

Save documentation on the mv command (strip overstruck characters):

    man mv | sed 's/.^H//g' > mv.txt

Display commands related to linking and compiling:

    man -k link compile | more

Display a summary of all intro files:

    man -f intro

Look up the intro page from Section 3M (the math library):

    man 3m intro                   In most systems
    man -s 3m introIn Solaris

Name

mesg

Synopsis

    mesg [options]

Change the ability of other users to use talk, or to send write messages to your terminal. With no options, display the permission status.

Options

n

Forbid write messages.

y

Allow write messages (the default).

Solaris allows you to supply a leading - (i.e., -n, -y).

Name

mkdir

Synopsis

    mkdir [options]directories

Create one or more directories. You must have write permission in the parent directory in order to create a directory. See also rmdir.

Common Options

-m, --modemode

Set the access mode for new directories.

-p, --parents

Create intervening parent directories if they don't exist.

GNU/Linux Options

-v, --verbose

Print directory names as they are created.

-Zcontext, --contextcontext

Set the security context. SELinux only.

Mac OS X Option

-v

Print directory names as they are created.

Examples

Create a read/execute-only directory named personal :

    mkdir -m 555 personal

The following sequence:

    mkdir work; cd work
    mkdir junk; cd junk
    mkdir questions; cd ../..

could be accomplished by typing this:

    mkdir -p work/junk/questions

Name

mkisofs

Synopsis

    mkisofs [options] -ofile pathspecs

Solaris and GNU/Linux only. Generate an ISO9660/Joliet/HFS filesystem for writing to a CD with a utility such as cdrecord. (HFS is the native Macintosh Hierarchical File System.) mkisofs takes a snapshot of a directory tree and generates a binary image that corresponds to an ISO9660 or HFS filesystem when it is written to a block device. Each specified pathspec describes the path of a directory tree to be copied into the ISO9660 filesystem; if multiple paths are specified, the files in all the paths are merged to form the image.

Options

-abstract file

Specify the abstract filename. Overrides an ABST= file entry in .mkisofsrc.

-allow-leading-dots, -ldots

Allow ISO9660 filenames to begin with a period.

-allow-lowercase

Allow ISO9660 filenames to be lowercase. Violates the ISO9660 standard.

-allow-multidot

Allow more than one dot in ISO9660 filenames. Violates the ISO9660 standard.

-Aid, -appidid

Specify a text string id that describes the application to be written into the volume header.

-bimage, -eltorito-bootimage

Specify the path and filename of the boot image to be used for making a bootable CD based on the El Torito specification.

-Bsun-images, -sparc-bootsun-images

Specify a comma-separated list of boot images needed to make a bootable CD for a Sun Sparc system.

-biblio file

Specify bibliographic filename. Overrides a BIBLIO= file entry in .mkisofsrc.

-boot-info-table

Specify that a 56-byte table with information on the CD layout is to be patched in at offset 8 of the boot file. If specified, the table is patched into the source boot file, so make a copy if the file isn't recreatable.

-boot-load-seg addr

Specify the load segment address of the boot image for a no-emulation El Torito CD.

-boot-load-size size

Specify the number of virtual 512-byte sectors to load in no-emulation mode. The default is to load the entire boot file. The number may need to be a multiple of four to prevent problems with some BIOSes.

-ccatalog, --eltorito-catalogcatalog

Specify the path, relative to the source pathspec, and the filename of the boot catalog for an El Torito bootable CD. Required for making a bootable CD.

-cache-inodes, -no-cache-inodes

Cache [do not cache] inode and device numbers to find hard links to files. The default on Linux is to cache. Use -no-cache-inodes for filesystems that do not have unique inode numbers.

-check-oldnames

Check all filenames imported from old sessions for mkisofs compliance with ISO9660 file-naming rules. If not specified, check only those files with names longer than 31 characters.

-check-session file

Check all old sessions for mkisofs compliance with ISO9660 file-naming rules. This option is the equivalent of:

-M file -C 0,0 -check-oldnames

where file is the pathname or SCSI device specifier that would be specified with -M.

-chrp-boot

Add a CHRP boot header.

-copyright file

Specify the name of the file that contains the copyright information. Overrides a COPY= file entry in .mkisofsrc.

-Clast-start,next-start

-cdrecord-paramslast-start,next-start

Required for creating a CDExtra or a second or higher-level session for a multisession CD. last-start is the first sector number in the last session on the disk, and next-start is the first sector number for the new session. Use the command:

cdrecord -msinfo

to get the values. Use -C with -M to create an image that is a continuation of the previous session; without -M, create an image for a second session on a CDExtra (a multisession CD with audio data in the first session and an ISO9660 filesystem image in the second).

-d, -omit-period

Omit trailing period from files that do not have one. Violates the ISO9660 standard, but works on many systems.

-debug

Enable debugging.

-dev device

For use with -C and -M, device is the device name from which to read the previous session of a multisession CD.

-D, -disable-deep-relocation

Do not use deep directory relocation. Violates the ISO9660 standard, but works on many systems.

-dir-mode mode

Specify the mode for directories used to create the image. Automatically enables the Rock Ridge extensions.

-dvd-video

Generate a UDF filesystem compliant with DVD videos.

-eltorito-alt-boot

Start with a new set of El Torito boot parameters. Allows putting more than one El Torito boot image on a CD (maximum is 63).

-exclude-list file

Check filenames against the globs contained in the specified file and exclude any that match.

-f, -follow-links

Follow symbolic links when generating the filesystem.

-file-mode mode

Specify the mode for files used to create the image. Automatically enables the Rock Ridge extensions.

-force-rr

Do not use automatic Rock Ridge detection for the previous session.

-Gimage, --generic-bootimage

Specify the path and filename of the generic boot image for making a generic bootable CD.

-gid gid

Set the group ID to gid for the source files. Automatically enables the Rock Ridge extensions.

-graft-points

Allow the use of graft points for filenames, which permits paths to be grafted at locations other than the root directory. -graft-points checks all filenames for graft points and divides the filename at the first unescaped equals sign (=).

-gui

Switch the behavior for a GUI. Currently, the only effect is to make the output more verbose.

-hard-disk-boot

Specify that the boot image to be used to create an El Torito bootable CD is a hard disk image and must begin with a master boot record containing a single partition.

-help

Print a help message.

-hidden glob

Set the hidden (existence) ISO9660 directory attribute for paths or filenames matching the shell-style pattern glob. To match a directory, the path must not end with a trailing /.

-hidden-list file

Specify a file containing a list of globs that are to be hidden with -hidden.

-hide glob

Find paths or files that match the shell-style pattern glob and hide them from being seen on the ISO9660 or Rock Ridge directory. The files are still included in the image file. If the pattern matches a directory, the contents of the directory are hidden. To match a directory, the path must not end with a trailing /. Use with the -hide-joliet option.

-hide-joliet glob

Hide paths or files that match the shell-style pattern glob so they will not be seen in the Joliet directory. If the pattern matches a directory, the contents of the directory are hidden. To match a directory, the path must not end with a trailing /. Should be used with -hide.

-hide-joliet-list file

Specify a file with a list of globs to be hidden with -hide-joliet.

-hide-joliet-trans-tbl

Hide the TRANS.TBL files from the Joliet tree.

-hide-list file

Specify a file containing a list of globs to be hidden with -hide.

-hide-rr-moved

Rename the directory RR_MOVED to .rr_moved to hide it as much as possible from the Rock Ridge directory tree. Use the -D option to omit the file entirely.

-input-charset charset

Specify the character set for characters used in local filenames. Specify help in place of a charset for a list of valid character sets.

-iso-level level

Set the ISO9660 conformance level. Possible values are:

1

Filenames are restricted to 8.3 characters and files may have only one section.

2

Files may have only one section.

3

No restrictions.

-jcharset charset

The equivalent of -input-charset -J.

-J, -joliet

Generate Joliet directory records in addition to regular ISO9660 filenames.

-joliet-long

Allow Joliet filenames to be up to 103 Unicode characters. This breaks the Joliet specification but apparently works.

-l, -full-iso9660-filenames

Allow full 31-character filenames instead of restricting them to the MS-DOS-compatible 8.3 format.

-log-file file

Send all messages to the specified log file.

-mglob, -excludeglob

Exclude files matching the shell-style pattern glob.

-max-iso9660-filenames

Allow up to 37 characters in ISO9660 filenames. Forces -N. Violates the ISO9660 standard.

-Mpath, -prev-sessionpath

Specify the path to an existing ISO9660 image to be merged. path can also be a SCSI device specified in the same syntax as cdrecord's dev= parameter. May be used only with -C.

-new-dir-mode mode

Specify the mode to use for new directories in the image. The default is 0555.

-nobak, -no-bak

Do not include backup files on the ISO9660 filesystem.

-no-boot

Mark the El Torito CD to be created as not bootable.

-no-emul-boot

Specify that the boot image for creating an El Torito bootable CD is a no-emulation image.

-no-iso-translate

Do not translate the # and ~ characters. Violates the ISO9660 standard.

-no-rr

Do not use Rock Ridge attributes from previous sessions.

-no-split-symlink-components

Do not split symlink components.

-no-split-symlink-fields

Do not split symlink fields.

-N, -omit-version-number

Omit version numbers from ISO9660 filenames. Violates the ISO9660 standard. Use with caution.

-old-root dir

Specify dir as the root used with -root for a previous session. Used for doing incremental backups.

-output-charset charset

Specify the output character set for Rock Ridge filenames. The default is the input character set.

-pprepid, -preparerprepid

Specify a text string of up to 128 characters describing the preparer of the CD. Overrides a PREP= parameter set in the file .mkisofsrc.

-publisher pubid

Specify a text string of up to 128 characters describing the publisher of the CD to be written to the volume header. Overrides a PUBL= parameter set in .mkisofsrc.

-pad, -no-pad

Pad [do not pad] the ISO9660 filesystem by 16 sectors (32KB). If the resulting size is not a multiple of 16 sectors, add sectors until it is. The default is -pad.

-path-list file

Specify a file that contains a list of pathspec directories and filenames to add to the ISO9660 filesystem. Note that at least one pathspec must be given on the command line.

-print-size

Print estimated filesystem size and exit.

-quiet

Run in quiet mode; do not display progress output.

-r, -rational-rock

Like -R, but set UID and GID to zero, set all file read bits to on, and turn off all file write bits. If any execute bit is set for a file, set all execute bits; if any search bit is set for a directory, set all search bits; if any special mode bits are set, clear them.

-relaxed-filenames

Allow ISO9660 filenames to include seven-digit ASCII characters except lowercase characters. Violates the ISO9660 standard.

-root dir

Makes dir be the root of the filesystem on the image. Similar to -graft-points.

-R, -rock

Generate SUSP (System Use Sharing Protocol) and Rock Ridge records using the Rock Ridge protocol.

-sort file

Sort file locations according to the rules in the specified file, which contains pairs of filenames and weights, with one space or tab between them. A higher weight puts the file closer to the beginning of the media.

-sparc-label text

Set the Sun disk label to text.

-split-output

Split the output into files approximately one gigabyte in size. Useful for creating DVDs on operating systems that don't support large files.

-stream-file-name name

Reserved for future use.

-stream-media-size size

Operate in streaming mode, with size as the media size in sectors. This creates a simple ISO9660 archive named STREAM.IMG. See the manpage for details.

-sunx86-boot files

Use files to create a Solaris x86 bootable CD.

-sunx86-label text

Set the System V Release 4 disk label on a Sun x86 CD to text.

-sysid id

Specify the system ID. Overrides a SYSI= parameter set in the file .mkisofsrc.

-table-name table

Use table as the translation table name instead of TRANS.TBL. Implies -T. For a multisession image, the table name must be the same as the previous session.

-T, -translation-table

Generate the file TRANS.TBL in each directory for establishing the correct filenames on non-Rock Ridge-capable systems.

-ucs-level num

Set the Unicode conformance level to the specified number, which can be between 1 and 3 (default is 3).

-udf

Produce a UDF filesystem.

-uid uid

Set the user ID to uid for the source files. Automatically enables the Rock Ridge extensions.

-use-fileversion level

Use file version numbers from the filesystem. The version number is a string from 1 to 32767. The default is to set a version of 1.

-U, -untranslated-filenames

Allow untranslated filenames. Violates the ISO9660 standard. Forces the options -d, -l, -N, -relaxed-filenames, -allow-lowercase, -allow-multidot, and -allow-leading-dots. Use with extreme caution.

-v, -verbose

Run in verbose mode. Specify twice to run even more verbosely.

-version

Print version information.

-volset id

Specify the volume set ID. Overrides a VOLS= parameter specified in .mkisofsrc.

-volset-seqno num

Set the volume set sequence number to num. Must be specified after -volset-size.

-volset-size num

Set the volume set size (the number of CDs in a set) to num. Must be specified before -volset-seqno.

-Vvolid, -volidvolid

Specify the volume ID (volume name or label) to be written to the master block. Overrides a VOLI= parameter specified in the file .mkisofsrc.

-xpath, -old-excludepath

Exclude path from being written to the CD, where path is the complete pathname derived from the concatenation of the pathname from the command line and the path relative to this directory. May be specified more than once to exclude multiple paths.

-z, -transparent-compression

Generate RRIP records for transparent compression. Violates the ISO9660 standard. Must be used with -r or -R. Such CDs are only transparently readable under GNU/Linux.

HFS options

-auto file

Set file as the Autostart file to make the HFS CD use the QuickTime 2.0 Autostart feature. file must be the name of an application or document at the top level of the CD and must be less than 12 characters long.

-boot-hfs-file file

Install file as the driver file that may make the CD bootable on a Macintosh.

-cluster-size size

Specify the size in bytes of a cluster or allocation units of PC Exchange files. Implies the use of --exchange.

-g, -apple

Create an ISO9660 CD with Apple's extensions.

-h, -hfs

Create a hybrid ISO9660/HFS CD. Use with -map, -magic, and/or the various HFS options.

-hfs-bless folder

"Bless" the specified directory (folder), specified as the full pathname to mkisofs. This is usually the System Folder and is used in creating HFS bootable CDs. The pathname must be in quotes if it contains spaces.

-hfs-creator creator

Set the four-character default creator for all files.

-hfs-parms parameters

Override certain HFS filesystem parameters. The manpage points you to a file in the source code for more details.

-hfs-type type

Set the four-character default type for all files.

-hfs-unlock

Leave the HFS volume unlocked so other applications can modify it. The default is to lock the volume.

-hfs-volid id

Specify the volume name for the HFS partition. This name is assigned to the CD on a Macintosh and replaces the ID set with the -V option.

-hide-hfs glob

Hide files or directories matching the shell-style pattern glob from the HFS volume, although they still exist in the ISO9660 and/or Joliet directory. May be specified multiple times.

-hide-hfs-list file

The specified file contains a list of globs to be hidden.

-icon-position

Use the icon position from the HFS file. This is an experimental option.

-input-hfs-charset charset

Specify the input character set used for HFS filenames when used with the -mac-name option. The default is cp10000 (Mac Roman).

-mac-name

Use the HFS filename as the starting point for the ISO9660, Joliet, and Rock Ridge filenames.

-magic file

Use the specified magic file to set a file's creator and type information based on the file's magic number, which is usually the first few bytes of the file. The magic file contains entries consisting of four tab-separated columns specifying the byte offset, type, test, and a message.

-map file

Use the specified mapping file to set a file's creator and type information based on the filename extension. Only files that are not known Apple or Unix file types need to be mapped. The mapping file consists of five-column entries specifying the extension, file translation, creator, type, and a comment. Creator and type are both four-letter strings.

-no-desktop

Do not create empty Desktop files. The default is to create such files.

-output-hfs-charset charset

Specify the output character set used for HFS filenames. Defaults to the input character set.

-part

Generate an HFS partition table. The default is not to generate the table.

-prep-boot file

PReP boot file. Up to four may be provided. Experimental option.

-probe

Search the contents of files for known Apple or Unix file types.

-root-info file

Set the information for the root folder from file. Experimental option.

-- format

Look for Macintosh files of the specified file format type. The valid formats are cap (Apple/Unix File System (AUFS) CAP files), dave, double, ethershare, exchange, macbin, netatalk, osx-double, osx-hfs, sfm, sgi, single, ushare, and xinet.

Name

mktemp

Synopsis

    mktemp [options]template

Generate a unique temporary filename for use in a script. The filename is based on the specified template, which may be any filename with at least six Xs appended (e.g., /tmp/mytemp.XXXXXX). mktemp replaces the Xs with the current process number and/or a unique letter combination. The file is created with mode 0600 (unless -u is specified) and the filename is written to standard output.

Common Options

-d

Make a directory, not a file.

-q

Fail silently in case of error. Useful to prevent error output from being sent to standard error.

-u

Operate in "unsafe" mode and unlink the temporary file before mktemp exits. Use of this option is not recommended.

Solaris and GNU/Linux Options

-p prefix

Use prefix as the directory for the temporary filename. The TMPDIR environment variable overrides this option. Implies -t.

-t

Create a path in a temporary directory. The directory name is the first of: the TMPDIR environment variable; the value of prefix given to -p; or /tmp.

GNU/Linux Option

-V

Print version information and exit.

Mac OS X Option

-t[prefix]

Like Solaris -p, except that the prefix is optional.

Name

more

Synopsis

    more [options] [files]

Display the named files on a terminal, one screenful at a time. After each screen is displayed, press the ENTER key to display the next line or press the spacebar to display the next screenful. Press h for help with additional commands, q to quit, / to search, or :n to go to the next file. more can also be invoked using the name page.

Tip

The Mac OS X more is a hard link to less; see less for more information.

Common Options

-c

Page through the file by clearing the screen instead of scrolling. This is often faster and is much easier to read.

-d

Display the prompt Press space to continue, 'q' to quit.

-f

Count logical rather than screen lines. Useful when long lines wrap past the width of the screen.

-l

Ignore formfeed (^L) characters.

-s

Squeeze; display multiple blank lines as one.

-u

Suppress underline characters and backspace (^H).

- n

Use n lines for each "window" (default is a full screen).

+ num

Begin displaying at line number num.

+/ pattern

Begin displaying two lines before pattern.

Solaris /usr/xpg4/bin/more Options

-e

Exit after writing the last line of the last file, instead of prompting.

-i

Ignore case when searching.

-n n

Use n lines for each "window" (default is a full screen).

-pcommand, +command

Execute more command command before showing each file.

-t tagstring

Display the screenful of the file containing the tag tagstring as defined by ctags. Processed before -p if both are given.

Solaris /usr/bin/more Options

-r

Force display of control characters, in the form ^ x.

-w

Wait for a user keystroke before exiting.

GNU/Linux Option

-p

Do not scroll; clear the screen and then show the text.

Examples

Page through file in "clear" mode, and display prompts:

    more -cd file

Format doc to the screen, removing underlines:

    nroff doc | more -u

View the manpage for the grep command; begin near the word "BUGS" and compress extra whitespace:

    man grep | more +/BUGS -s

Name

mount

Synopsis

    mount [options] [arguments]

Mount a filesystem. This command is very system-specific. See the mount entries in the sections for each operating system.

Name

msgfmt

Synopsis

    msgfmt [options]pofiles

Solaris and GNU/Linux only. msgfmt translates "portable object files" (.po files) into loadable message files that can be used by a running application via the gettext (3C) and dgettext (3C) library functions.

Portable object files are created using xgettext from the original C source code files. A translator then edits the .po file, providing translations of each string (or "message") in the source program. The format is described in the msgfmt (1) manpage.

Once compiled by msgfmt, the running program uses the translations for its output when the locale is set up appropriately.

The Solaris version of this command has picked up some features from the GNU version; see gettext for more discussion of this fact and for a URL reference. The Solaris version can create both Solaris format output files and GNU format output files.

Common Options

-Ddir, --directory=dir

Add dir to the list of directories searched for input files.

-f, --use-fuzzy

Place fuzzy entries in the output.

-ofile, --output=file

Place the output in file. This option ignores domain directives and duplicate msgids.

--strict

Enable strict Uniforum compliance: append the .mo suffix if not already present. The Solaris version ignores this option for Solaris output format files.

-v, --verbose

Be verbose. Duplicate message identifiers are listed, but message strings are not redefined.

Solaris Options

-g

Generate GNU format output files. Mutually exclusive with -s.

-s

Generate Solaris format output files. Mutually exclusive with -g.

GNU/Linux Options

The GNU gettext package continues to acquire features over time. The following list may thus be incomplete; check msgfmt(1) for the full story.

-acount, --alignment=count

Align strings to count bytes (default is one).

-c, --check

Do all of --check-domain, --check-format, and --check-header.

--check-accelerators[=char]

Verify translation of menu-item keyboard-accelerator strings. Such strings are assumed to use & as the "marker" for accelerator keys; this option verifies that the translation only has one & character. With char, use that character instead of &.

--check-domain

Check for conflicts between the -o option and domain directives.

--check-format

Check language-dependent format strings.

--check-header

Check for the presence of the header entry, and verify its contents.

--csharp

C# mode: Create a .NET .dll file.

--csharp-resources

Create a .NET .resources file.

--C, --check-compatibility

Be compatible with the X/Open msgfmt. This produces errors if any GNU extensions are used.

-d dir

Place generated files for C#, Java and Tcl underneath dir.

-h, --help

Print a command-line summary and exit.

-j, --java

Java mode: create a Java ResourceBundle class.

--java2

Like -j, but assume JDK 1.2 or higher.

-llocale, --locale=locale

Specify the locale for C#, Java and Tcl modes.

--no-hash

Do not include the hash table in the binary file.

-P, --properties-input

The input files use Java .properties syntax.

--qt

Qt mode: create a Qt .qm file.

-rresource, --resource=resource

Specify the resource name for C# and Java modes.

--statistics

Print translation statistics.

--stringtable-input

The input files use NeXTstep/GNUstep .strings syntax.

--tcl

Tcl mode: create a tcl/msgcat .msg file.

-V, --version

Print version information and exit.

Name

mv

Synopsis

    mv [options]sources target

Basic command to move files and directories around on the system or to rename them. mv works as the following table shows.

Source

Target

Result

File

name

Rename file as name.

File

Existing file

Overwrite existing file with source file.

Directory

name

Rename directory as name.

Directory

Existing directory

Move directory to be a subdirectory of existing directory.

One or more files

Existing directory

Move files to directory.

Common Options

--

Use this when one of the names begins with a -. For compatibility with old programs, a plain - also works.

-f, --force

Force the move, even if target file exists; suppress messages about restricted access modes.

-i, --interactive

Inquire; prompt for a y (yes) response before overwriting an existing target.

GNU/Linux Options

-b, --backup[=control]

Back up any existing files. When using the long version of the option, the optional control parameter controls the kind of backup. When no control is specified, mv attempts to read the control value from the VERSION_CONTROL environment variable. Accepted values are:

none, off

Never make backups.

numbered, t

Make numbered backups.

existing, nil

Match existing backups, numbered or simple.

simple, never

Always make simple backups.

--reply= type

Set the default behavior that is used for overwriting existing files. --replay=yes is the same as --force. --replay=query is the same as --interactive. --replay=no skips existing files.

--strip-trailing-slashes

Removes trailing slashes from each source argument. This is needed on many systems for symbolic links that point to directories; on POSIX systems, running mv on such a link terminated with a trailing slash moves the pointed-to directory and not the link itself.

-Ssuffix, --suffix=suffix

Override the SIMPLE_BACKUP_SUFFIX environment variable, which determines the suffix used for making simple backup files. If the suffix is not set either way, the default is a tilde (~).

--target-directory= dir

Move all sources into dir. This allows you to use mv together with xargs, which otherwise does not work, since the final argument would be the target.

-u, --update

Do not remove a file or link if its modification date is the same as or newer than that of its replacement.

-v, --verbose

Print the name of each file before moving it.

Mac OS X Options

-n

Do not overwrite an existing file. Overrides a previous -f or -i.

-v

Verbose; print filenames as they are moved.

Name

nawk

Synopsis

    nawk [options] [program] [var=value ...] [files]

New version of the awk programming language. For more information see awk and Chapter 11.

Name

nice

Synopsis

    nice [options] command [arguments]

Execute a command and arguments with lower priority (i.e., be "nice" to other users). Also built-in to the C shell, with a different command syntax (see Chapter 5).

Options

- n

Run command with a niceness of n (1–19); default is 10. Higher n means lower priority. A privileged user can raise priority by specifying a negative n (e.g., -5). nice works differently in the C shell (see Chapter 5). + n raises priority, - n lowers it, and 4 is the default.

-nn, --adjustment=n

Same as - n.

Name

nl

Synopsis

    nl [options] [file]

Number the lines of file in logical page segments. Numbering resets to 1 at the start of each logical page. Pages consist of a header, body, and footer; each section may be empty. It is the body that gets numbered. The sections are delimited by special standalone lines as indicated next; the delimiter lines are copied to the output as empty lines.

Section Delimiters

\:\:\:

Start of header

\:\:

Start of body

\:

Start of footer

Common Options

-btype, --body-numbering=type

Number lines according to type. Values are:

a

All lines.

n

No lines.

t

Text lines only (the default).

p" exp "

Lines matching the regular expression exp only.

-dxy, --section-delimiter=xy

Use characters xy to delimit logical pages (default is \:).

-ftype, --footer-numbering=type

Like -b, but number footer (default type is n).

-htype, --header-numbering=type

Like -b, but number header (default type is n).

-in, --page-increment=n

Increment each line number by n (default is 1).

-ln, --join-blank-lines=n

Count n consecutive blank lines as one line.

-nformat, --number-format=format

Set line number format. Values are:

ln

Left-justify, omit leading zeros.

rn

Right-justify, omit leading zeros (default).

rz

Right-justify.

-p, --no-renumber

Do not reset numbering at start of pages.

-sc, --number-separator=string

Separate text from line number with character(s) c (default is a tab).

-vn, --first-page=n

Number each page starting at n (default is 1).

-wn, --number-width=n

Use n columns to show line number (default is 6).

Examples

List the current directory, numbering files as 1), 2), etc.:

    ls | nl -w3 -s')  '

Number C source code and save it:

    nl prog.c > print_prog

Number only lines that begin with #include :

    nl -bp"^#include" prog.c

Name

nm

Synopsis

    nm [options]objfiles

Print the symbol table (name list) in alphabetical order for one or more object files (usually ELF or COFF files), shared or static libraries, or binary executable programs. Output includes each symbol's value, type, size, name, etc. A key letter categorizing the symbol can also be displayed. You must supply at least one object file.

On Solaris, nm is in /usr/ccs/bin and /usr/xpg4/bin.

Common Options

-A, --print-file-name

Write the full pathname or library name on each line.

-g, --extern-only

Write only external (global) symbol information.

-P, --portability

Print output in the POSIX portable format.

-tradix, --radix=radix

Write numeric values in the specified radix : d for decimal, o for octal, and x for hexadecimal.

-u, --undefined-only

Report only the undefined symbols.

Solaris and GNU/Linux Options

-C, --demangle[=style]

Print demangled C++ symbol names. GNU/Linux lets you supply the appropriate demangling style.

-D, --dynamic

Print dynamic, not normal, symbols. Useful only when working with dynamic objects (some kinds of shared libraries, for example).

-V, --version

Print nm's version number on standard error.

GNU/Linux and Mac OS X Options

-a, --debug-syms

Print debugger symbols.

-n, --numeric-sort

Sort the external symbols numerically, not by name.

-p, --no-sort

Don't sort the symbols; print them in the order they are found in the object file.

-r, --reverse-sort

Sort in reverse order.

Solaris Options

-e

Report only external and static symbols; obsolete.

-f

Report all information; obsolete.

-h

Suppress the header.

-l

Use with -p; indicate WEAK symbols by appending an asterisk (*) to key letters.

-n

Sort the external symbols by name.

-o

Report values in octal.

-p

Precede each symbol with its key letter (used for parsing).

-r

Report the object file's name on each line.

-R

Print the archive name (if present), followed by the object file and symbol name. -r overrides this option.

-s

Print section name instead of section index.

-T

Truncate the symbol name in the display; obsolete.

Solaris /usr/xpg4/bin/nm Options

-u

Print output in long format.

-v

Sort the external symbols by value.

-x

Report values in hexadecimal.

GNU/Linux Options

-B

Same as --format=bsd (for compatibility with MIPS).

--defined-only

Display only defined symbols.

-fformat, --format=format

Specify output format (bsd, sysv, or posix). Default is bsd.

-l, --line-numbers

Use debugging information to try to find line numbers for each symbol.

--no-demangle

Do not demangle C++ symbols.

-o

Same as -a.

-s, --print-armap

Print the index of files and symbols in ar archives.

--size-sort

Sort by size.

-S, --print-size

Print the size of defined symbols.

--target= bfdname

Use object code format bfdname, not the system default.

-v

Same as -n.

-X 32_64

For compatibility with AIX nm. Ignored.

Mac OS X Options

--arch type

Display information about only architecture type when running nm on a "fat" binary. Use all to see information about all architectures.

-f

Display the symbol table of a shared library as if it were a flat file.

-j

Display just the symbol names.

-l

Show a pseudo-symbol .section_start if no such symbol exists. Use together with -s.

-m

Display N_SECT (Mach-O) symbols with segment and section names and their status as external, nonexternal, undefined, common, absolute, or indirect.

-o

Include the filename or archive element name on each output line.

-s segname sectname

List only the symbols in (segname, sectname).

-x

Print entries in hexadecimal, with the name as a string.

Solaris Key Letters

Uppercase letters are used for GLOBAL and WEAK symbols. Lowercase letters are used for LOCAL symbols.

A

Absolute symbol.

B

BSS (uninitialized data space).

C

Common symbol.

D

Data object symbol.

F

File symbol.

L

Thread local storage.

N

Symbol with no type.

S

Section symbol.

T

Text symbol.

U

Undefined symbol.

Name

nohup

Synopsis

    nohup command [arguments] &

Continue to execute the named command and optional command arguments after you log out (make command immune to hangups; i.e., no hangup). In the C shell, nohup is built in. In the Korn and Bash shells, nohup allows output redirection; output goes to nohup.out by default. In the Korn shell, nohup is an alias that allows the command it runs to also be aliased. (See Chapters 4 and 5.)

The Solaris /usr/bin/nohup accepts some rather specialized options; see the manpage for details.

Name

nroff

Synopsis

    nroff [options] [files]

Format documents to line printer or to screen. See Chapter 18.

Name

od

Synopsis

    od [options] [file] [[+] offset[. | b]]

Octal dump; produce a dump (normally octal) of the named file. file is displayed from its beginning, unless you specify an offset (normally in octal bytes). In the following options, a "word" is a 16-bit unit.

Common Options

-Abase, --address-radix=base

Indicate how the offset should be written. Values for base are d for decimal, o for octal, x for hexadecimal, or n for no offset.

-b

Display bytes as octal.

-c

Display bytes as ASCII.

-d

Display words as unsigned decimal.

-f

Display 32-bit words as floating point.

-jskip, --skip-bytes=skip

Jump over skip bytes from the beginning of the input. skip can have a leading 0 or 0x for it to be treated as an octal or hexadecimal value. It can have a trailing b, k, or m to be treated as a multiple of 512, 1024, or 1,048,576 bytes.

-Ncount, --read-bytes=count

Process up to count input bytes.

-o

Display words as unsigned octal (the default).

-ttype_string, --format=type_string

Specify one or more output types. See the "Common Type Strings" section later in this entry.

-v, --output-duplicates

Verbose; show all data. Without this, duplicate lines print as *.

-x

Display words as hexadecimal.[*]

+

Required before offset if file isn't specified.

Solaris and Mac OS X Options

-D

Display 32-bit words as unsigned decimal.

-F

Display 64-bit words as extended precision.

-O

Display 32-bit words as unsigned octal.

-s

Display words as signed decimal.

-X

Display 32-bit words as hexadecimal.

GNU/Linux and Mac OS X Options

-a

Same as -t a.

-h

Same as -t x2.

Solaris Options

-C

Interpret bytes as characters based on the setting of LC_CTYPE.

-S

Display 32-bit words as signed decimal.

GNU/Linux Options

-i

Same as -t d2.

-l

Same as -t d4.

-sbytes, --strings[=bytes]

Output strings that are at least bytes ASCII graphic characters long (default is 3 if bytes is not specified for --strings).

--traditional

Accept arguments in the traditional form, which takes a single file specification with an optional offset and label. offset is an octal number indicating how many input bytes to skip over. label specifies an initial pseudo-address, which is printed in parentheses after any normal address. Both the offset and the label can begin with an optional plus sign (+), and can have a trailing decimal point (.) to force the offset to be interpreted as a decimal number and/or a trailing b to multiply the number of bytes skipped by offset by 512.

-w[bytes], --width[=bytes]

Dump bytes input bytes to each output line. Defaults to 16 if this option is omitted. If --width is specified but bytes is omitted, the default is 32.

Mac OS X Options

-B

Same as -o.

-e

Same as -F.

-H

Same as -X.

-i

Same as -t dI.

-I, -l, -L

Same as -t dL.

Modifiers for offset

.

offset value is decimal.

b

offset value is 512-byte blocks. Solaris and Mac OS X also allow B.

Common Type Strings

Type strings can be followed by a decimal number indicating how many bytes to process.

a

ASCII named characters (e.g., BEL for \007)

c

Single- or multibyte characters

d, o, u, x

Signed decimal, unsigned octal, decimal, and hexadecimal

f

Floating point

[*] od -x is the canonical Unix oxymoron.

Name

passwd

Synopsis

    passwd [options] [user]

Create or change a password associated with a user name. Only the owner or a privileged user may change a password. Owners need not specify their user name.

Solaris and GNU/Linux Privileged User Options

-d, --delete

Delete password; user is no longer prompted for one.

-f, --force

Force expiration of user's password; user must change password at next login.

-l, --lock

Lock user's password; mutually exclusive with -d and -u.

-ndays, --minimum=days

Set the minimum number of days that must pass before user can change his password.

-u, --unlock

Unlock user's password; mutually exclusive with -l.

-wdays, --warning=days

Give user a warning beginning days days before his password is due to expire.

-xdays, --maximum=days

Set the number of days before the password expires. Use a value of -1 (minus one) to disable password aging, 0 to force expiration like -f.

Solaris Options

Normal users may change the so-called gecos information (user's full name, office, etc.) and login shell when using NIS or NIS+; otherwise only privileged users may change the following:

-D domain

Use the passwd.org_dir database in the NIS+ domain domain, instead of in the local domain.

-e

Change the login shell.

-g

Change the gecos information.

-r db

Change the password in password database db, which is one of files, ldap, nis, or nisplus. Only a privileged user may use files.

-s

Display password information:

user name.

Password status (NP for no password, PS for password, LK for locked).

The last time the password was changed (in mm/dd/yy format).

Number of days that must pass before user can rechange the password.

Number of days before the password expires.

Number of days prior to expiration that user is warned of impending expiration.

The following may be used only by privileged users.

-a

Use with -s to display password information for all users. user should not be supplied.

-h

Change the home (login) directory.

-N

Disable user's password without locking it; mutually exclusive with -d.

GNU/Linux Options

-k, --keep-tokens

Keep authentication tokens that have not expired.

-idays, --inactive=days

After days days, disable inactive accounts.

--stdin

Read new password information from standard input.

-S, --status

Print a short status about user's password entry.

-?, --help, --usage

Print a command-line summary and exit.

Mac OS X Options

-i db

Change the password in db, which may be one of file, netinfo, nis, or opendirectory.

-l location

Change the password in location. Valid values vary based on the argument to -i:

file

A filename. Default is /etc/master.passwd.

netinfo

A domain name or server/tag pair.

nis

An NIS domain name.

opendirectory

A directory node name.

Name

paste

Synopsis

    paste [options]files

Merge corresponding lines of one or more files into vertical columns, separated by a tab. See also cut, join, and pr.

Options

-

Replace a filename with the standard input.

-dchar, --delimiters=char

Separate columns with char instead of a tab. char can be any regular character or the following escape sequences:

\n

Newline

\t

Tab

\\

Backslash

\0

Empty string

Note: you can separate columns with different characters by supplying more than one char.

-s, --serial

Merge subsequent lines from one file.

Examples

Create a three-column result file results from the files in1.data, in2.data, and in3.data:

    paste in1.data in2.data in3.data > results

List users in two columns:

    who | paste - -

Merge each pair of lines into one line:

    paste -s -d"\t\n" list

Name

patch

Synopsis

    patch [options] [original [patchfile]]

Apply the patches specified in patchfile to original. Replace the original with the new, patched version; move the original to original .orig or original~. The patch file is a difference listing produced by the diff command. On Solaris, this command is named gpatch.

URL: http://www.gnu.org/software/patch.

Options

-b, --backup

Back up the original file.

--backup-if-mismatch, --no-backup-if-mismatch

When not backing up all original files, these options control whether a backup should be made when a patch does not match the original file. The default is to make backups unless --posix is specified.

--binary

Read and write files as binary. Has no effect on a Unix system.

-Bprefix, --prefix=prefix

Prepend prefix to the backup filename.

-c, --context

Interpret patchfile as a context diff.

-ddir, --directory=dir

cd to directory before beginning patch operations.

--dry-run

Print the results of applying a patch, but don't change any files.

-Dstring, --ifdef=string

Mark all changes with:

#ifdef string
       ...
    #endif

-e, --ed

Treat the contents of patchfile as ed commands.

-E, --remove-empty-files

If patch creates any empty files, delete them.

-f, --force

Force all changes, even those that look incorrect. Skip patches if the original file does not exist; force patches for files with the wrong version specified; assume patches are never reversed.

-Fnum, --fuzz=num

Specify the maximum number of lines that may be ignored (fuzzed over) when deciding where to install a hunk of code. The default is 2. Meaningful only with context diffs.

-gnum, --getnum

Specify whether to check the original file out of source control if it is missing or read-only. If num is a positive number, get the file. If it is negative, prompt the user. If it is 0, do not check files out of source control. The default is negative or the value of the PATCH_GET environment variable when set, unless the --posix option is given. Then the default is 0.

-ifile, --input=file

Read patch from file instead of standard input.

-l, --ignore-whitespace

Ignore whitespace while pattern matching.

-n, --normal

Interpret patch file as a normal diff.

-N, --forward

Ignore patches that appear to be reversed or to have already been applied.

-ofile, --output=file

Print output to file.

-p[num], --strip[=num]

Specify how much of preceding pathname to strip. A num of 0 strips everything, leaving just the filename. 1 strips the leading /. Each higher number after that strips another directory from the left.

--posix

Conform more strictly to the POSIX standard.

--quoting-style= style

Set the quoting style used when printing names. The default style is shell unless set by the environment variable QUOTING_STYLE. style may be one of the following:

c

Quote as a C language string.

escape

Like c, but without surrounding double-quote characters.

literal

Print without quoting.

shell

Quote for use in shell when needed.

shell-always

Quote for use in shell even if not needed.

-rfile, --reject-file=file

Place rejects (hunks of the patch file that patch fails to place within the original file) in file. Default is original .rej.

-R, --reverse

Do a reverse patch: attempt to undo the damage done by patching with the old and new files reversed.

-s, --silent, --quiet

Suppress commentary.

-t, --batch

Skip patches if the original file does not exist.

-T, --set-time

When original file timestamps match the times given in the patch header, set timestamps for patched files according to the context diff headers. Use option -f to force date changes. Assume timestamps are in local time.

-u, --unified

Interpret patch file as a unified context diff.

-v, --version

Print version number and exit.

--verbose

Verbose mode.

-Vmethod, --version-control=method

Specify method for creating backup files (overridden by -B):

t, numbered

Make numbered backups.

nil, existing

Back up files according to preexisting backup schemes, with simple backups as the default. This is patch's default behavior.

never, simple

Make simple backups.

-Yprefix, --basename-prefix=prefix

Use the specified prefix with a file's basename to create backup filenames. Useful for specifying a directory.

-zsuffix, --suffix=suffix

Back up the original file in original.suffix.

-Z, --set-utc

When original file timestamps match the times given in the patch header, set timestamps for patched files according to the context diff headers. Use option -f to force date changes. Assume timestamps are in Coordinated Universal Time (UTC).

Example

Update a software distribution:

    $ cd whizprog-1.1
    $ patch --verbose --backup -p1 < whizprog-1.1-1.2.diff
                     Lots of messages here as patch works
    $ find . -name '*.orig' -print | xargs rm
    $ cd ..
    $mv whizprog-1.1 whizprog-1.2

Name

pathchk

Synopsis

    pathchk [-p] pathnames

Check pathnames. This command verifies that the file(s) named by pathnames do not violate any constraints of the underlying filesystem (such as a name that might be too long), and that the files could be accessed (e.g., if an intermediate directory lacks search permission, it is a problem). The -p option provides additional portability checks for the pathnames. GNU/Linux provides --portability as another name for -p.

Name

pax

Synopsis

    pax [options] [patterns]

Portable Archive Exchange program. When members of the first POSIX 1003.2 working group could not standardize on either tar or cpio, they invented this program.[*] (See also cpio and tar.)

GNU/Linux and Mac OS X use almost identical versions of pax, developed by the OpenBSD team, based on the original freely available version by Keith Muller.

pax operates in four modes, depending on the combinations of -r and -w:

List mode

No -r and no -w. List the contents of a pax archive. Optionally, restrict the output to filenames and/or directories that match a given pattern.

Extract mode

-r only. Extract files from a pax archive. Intermediate directories are created as needed.

Archive mode

-w only. Archive files to a new or existing pax archive. The archive is written to standard output; it may be redirected to an appropriate tape device if needed for backups.

Pass-through mode

-r and -w. Copy a directory tree from one location to another, analogous to cpio -p.

Common Options

Here are the options available in the four modes:

    None:       c d f           n     s     v
    -r:         c d f   i k     n o p s   u v
    -w:     a b   d f H i     L   o   s t u v x X
    -rw:          d   H i k l   n   p s t u v   X

-a

Append files to the archive. This may not work on some tape devices.

-b size

Use size as the blocksize, in bytes, of blocks to be written to the archive.

-c

Complement. Match all file or archive members that do not match the patterns.

-d

For files or archive members that are directories, extract or archive only the directory itself, not the tree it contains.

-f archive

Use archive instead of standard input or standard output.

-H

Follow symbolic links named on the command line, archiving the pointed-to file or directory.

-i

Interactively rename files. For each file, pax writes a prompt to /dev/tty and reads a one-line response from /dev/tty. The responses are as follows:

ENTER

Skip the file.

A period

Take the file as is.

new name

Anything else is taken as the new name to use for the file.

EOF

Exit immediately with a nonzero exit status.

-k

Do not overwrite existing files.

-l

Make hard links. When copying a directory tree (-rw), make hard links between the source and destination hierarchies wherever possible.

-L

Follow all symbolic links, archiving the pointed-to file or directory.

-n

Choose the first archive member that matches each pattern. No more than one archive member will match for each pattern.

-o options

Reserved for format-specific options.

-p privs

Specify one or more privileges for the extracted file. privs specify permissions or other characteristics to be preserved or ignored, as follows:

a

Do not preserve file access times.

e

Retain the user and group IDs, permissions (mode), and access and modification time.

m

Do not preserve the file modification time.

o

Retain the user and group ID.

p

Keep the permissions (mode).

-r

Read an archive and extract files.

-s replacement

Use replacement to modify file or archive member names. This is a string of the form -s/ old / new /[gp]. This is similar to the substitution commands in ed, ex, and sed. old is a regular expression, and new may contain & to mean the matched text and \ n for subpatterns. The trailing g indicates the substitution should be applied globally. A trailing p causes pax to print the resulting new filename. Multiple -s options may be supplied. The first one that works is applied. Any delimiter may be used, not just /, but in all cases it is wise to quote the argument to prevent the shell from expanding wildcard characters.

-t

Reset the access time of archived files to what they were before being archived by pax.

-u

Ignore files older than preexisting files or archive members. The behavior varies based on the current mode.

Extract mode

Extract the archive file if it is newer than an existing file with the same name.

Archive mode

If an existing file with the same name as an archive member is newer than the archive member, supersede the archive member.

Pass-through mode

Replace the file in the destination hierarchy with the file in the source hierarchy (or a link to it) if the source hierarchy's file is newer.

-v

In list mode, print a verbose table of contents. Otherwise, print archive member names on standard error.

-w

Write files to standard output in the given archive format.

-x format

Use the given format for the archive. The value of format is one of cpio, pax, or ustar. The details of the formats are provided in the IEEE 1003.1 (2004) POSIX standard. The formats are mutually incompatible; attempting to append using one format to an archive using another is an error.

Solaris provides the xustar format, which allows archiving files over 8GB in size.

Mac OS X and GNU/Linux provide the bcpio, sv4cpio, sv4crc, and tar formats, which provide compatibility with various historical versions of tar and cpio.

-X

When traversing directory trees, do not cross into a directory on a different device (the st_dev field in the stat structure, see stat (2); similar to the -mount option of find).

Solaris Options

-@

Archive or extract extended attributes.

GNU/Linux and Mac OS X Options

-B bytes

Write no more than bytes bytes for each volume. Intended for use on tape media, not recommended for floppies or hard disks. bytes may be suffixed with m, k, or b to specify units of megabytes, kilobytes, or 512-byte blocks, respectively.

-D

Like -u, but check the file's inode-change time instead of the modification time.

-E count

Retry failed reads no more than count times. A limit of 0 causes pax to stop after the first read failure. A limit of NONE causes pax to retry forever, which could cause an infinite loop when reading from very poor media.

-G group

Select files based on the group ownership. Use # number to supply a numeric GID. Use \# if the group name contains a literal # character. Multiple -G options may be supplied.

-P

Do not follow any symbolic links. This is the default.

-T[from_date][,to_date][/[c][m]]

Choose files based on modification time or inode change time whose times fall within a specified range. With just from_date, select files of same age or younger. With just to_date, select files of same age or older. With both, choose files falling within the given dates. If the two dates are equal, the file's time must exactly match the given date. The trailing c and m let you specify which timestamp to compare against: inode change time or modification time, respectively. If both are used, both times are compared. The default is the modification time. Multiple -T options may be provided; the first one that matches a given file is used.

The time is specified as [ yy [ mm [ dd [ hh]]]]mm [.ss]. Only the minutes (mm) field is required. Other fields may be added, but no intervening fields may be omitted (e.g., you can't provide the day of the month without also providing the hour). Times are relative to the current time; thus an hhmm specification is relative to today.

-U user

Select files based on the user. Use # number to supply a numeric UID. Use \# if the username contains a literal # character. Multiple -U options may be supplied.

-Y

Like -D, but check the inode change time of the pathname created after all filename substitutions have occurred.

-z

Use gzip to compress/decompress the archive when writing/reading. Mutually exclusive with -a.

-Z

Like -u, but check the modification time of the pathname created after all filename substitutions have occurred.

Examples

Copy the current directory to tape:

    pax -x ustar -w -f /dev/rmt/0m .

Copy a home directory to a different directory (presumably on a bigger disk).

    # cd /home
    #pax -r -w arnold /newhome

[*] This period in Unix history is known as the "tar wars." :-)

Name

perl

Synopsis

    perl [options] [programfile] [files]

perl is the interpreter for the Perl programming language (the Swiss Army knife of Unix programming tools). The Perl program is provided via one or more -e options. If no -e options are used, the first file named on the command line is used for the program. See perlrun (1) for the full list of options.

For more information about Perl, see Learning Perl, Programming Perl, and Advanced Perl Programming, all listed in the Bibliography.

URLs: http://www.perl.org and http://www.perl.com.

Name

pr

Synopsis

    pr [options] [files]

Format one or more files according to options to standard output. Each page includes a heading that consists of the page number, filename, date, and time. When files are named directly, the date and time are those of the file's modification time. Otherwise, the current date and time are used.

Common Options

-a, --across

Multicolumn format; list items in rows going across.

-d, --double-space

Double-spaced format.

-e[tab-char[width]], --expand-tabs=[tab-char[width]]

Convert tabs (or tab-chars) to spaces. If width is specified, convert tabs to width characters (default is 8).

-F, --form-feed

Separate pages with form feeds, not newlines. (Solaris /usr/bin/pr folds input lines, avoiding truncation by -a or -m.)

-hstr, --header=str

Replace default header with string str.

-i[out-tab-char[out-tab-width]]

--output-tabs[=out-tab-char[out-tab-width]]

Replace spaces with tabs on output. Can specify alternative tab character (default is tab) and width (default is 8).

-ln, --length=n

Set page length to n lines (default is 66).

-m, --merge

Merge files, printing one in each column (can't be used with - n and -a). Text is chopped to fit. See also paste.

-n[delimiter[digits]], --number-lines[=delimiter[digits]]

Number columns, or, with the -m option, number lines. Append delimiter to each number (default is a tab) and limit the size of numbers to digits (default is 5).

-on, --indent=n

Offset each line n spaces (default is 0).

-r, --no-file-warnings

Suppress messages for files that can't be found.

-s[delimiter], --separator[=delimiter]

Separate columns with delimiter (default is a tab).

-t, --omit-header

Omit the page header and trailing blank lines.

-wn, --width=n

Set line width to n (default is 72).

+beg_page[:end-page], --pages=[beg_page[:end-page]

Begin printing at page beg_page (default is 1). The GNU/Linux version supports supplying an end page end_page also.

-n, --columns=n

Produce output having n columns (default is 1); tabs are expanded as with -i.

Solaris Options

-f

Separate pages using a formfeed character (^L) instead of a series of blank lines.

-p

Pause before each page.

GNU/Linux Options

-c, --show-control-chars

Convert control characters to hat notation (such as ^C), and other unprintable characters to octal backslash format.

-Dformat, --date-format=format

Format the header date using format. See the date command for the possible formats.

-f

Same as -F.

-J, --join-lines

Merge full lines; ignore -W if set.

-Nnum, --first-line-number=num

Start counting with num at the first line of the first page printed. Also see + beg_page.

-S[string], --sep-string[=string]

Separate columns with string. Default is a tab with -J and a space otherwise.

-T, --omit-pagination

Like -t but also suppress form feeds.

-v, --show-non-printing

Convert unprintable characters to octal backslash format.

Mac OS X Options

-f

Like -F, but pause before printing the first page.

-L locale

Use locale for the locale, instead of what's in the environment.

-p

Pause before each page.

Examples

Print a side-by-side list, omitting heading and extra lines:

    pr -m -t list.1 list.2 list.3

Alphabetize a list of states; number the lines in five columns:

    sort states_50 | pr -n -5

Name

printenv

Synopsis

    printenv [variable]

Print values of all environment variables or, optionally, only the specified variable. The more standard alternative, env, doesn't let you view just one variable, but it lets you redefine them. On Solaris, printenv is in /usr/ucb.

Name

printf

Synopsis

    printf formats [strings]

Print strings using the specified formats. formats can be ordinary text characters, C-language escape characters, printf (3S) format conversion specifiers, or, more commonly, a set of conversion arguments listed next.

Tip

printf is built into Bash and ksh93 (see Chapter 4); this entry describes the external version in /usr/bin/printf.

Common Arguments

%b

Process a string argument for backslash escapes (not in printf (3S)). See the description of allowed escapes under echo.

%s

Print the next string.

%[-]m[.n]s

Print the next string, using a field that is m characters wide. Optionally limit the field to print only the first n characters of string. Strings are right-adjusted unless the left-adjustment flag - is specified.

Solaris Argument

% n $s

Print the nth string.

Examples

$ printf '%s %s\n' "My files are in" $HOME
    My files are in /home/arnold
    $ printf '%-25.15s %s\n' "My files are in" $HOME
    My files are in           /home/arnold

Name

ps

Synopsis

    ps [options] [arguments]

Process status. This command is very system-specific. See the ps entries in the sections for each operating system.

Name

pwd

Synopsis

    pwd

Print the full pathname of the current directory. (Command name stands for "print working directory.") Note: the built-in versions, pwd (Bash and Korn shells) and dirs (C shell), are faster, so you might want to define the following C shell alias:

    alias pwd dirs -l

Name

python

Synopsis

    python

A powerful object-oriented scripting language often compared to Perl or Java. python drives many of the configuration scripts used in Red Hat and other Linux distributions. For more information, see Learning Python and Programming Python.

URL: http://www.python.org.

Name

r Commands

Synopsis

    rcp [options] file1 file2
                     rcp [options] file ... directory
    rlogin [options] rhost
    rsh [options] host [command]

The BSD "r" commands provide remote file copy, remote login, and remote command execution across a TCP/IP network. In the 21st century these commands are considered to be terribly insecure, and you should never use them. Instead, consider the secure versions that come as part of the Secure Shell: scp, slogin, and ssh (see ssh).

Name

rcs

Synopsis

    rcs [options]files

The Revision Control System (RCS) keeps track of multiple versions of files, letting you store and retrieve revisions and track the history of the files. The rcs command creates new RCS files and modifies attributes of existing files. See Chapter 13 for more information on RCS and its commands.

Name

reset

Synopsis

    reset [options] [terminal]

Clear screen (reset terminal). If terminal is specified on the command line, the value is used as the terminal type. reset is a symbolic link to the tset command. Invoking the command as reset is useful for clearing your terminal when a program dies and leaves the terminal in an abnormal state. You may have to run the command with a linefeed character (usually CTRL-J) before and after it:

              CTRL-J reset CTRL-J

On Solaris, this command is found is /usr/ucb. See the tset entry for the available options.

Name

rm

Synopsis

    rm [options]files

Delete one or more files. To remove a file, you must have write permission on the directory that contains the file, but you need not have permission on the file itself. If you do not have write permission on the file, you are prompted (y or n) to override.

Common Options

-f, --force

Force. Remove write-protected files without prompting.

-i, --interactive

Prompt for y (remove the file) or n (do not remove the file). Overrides -f.

-r, -R, --recursive

If file is a directory, remove the entire directory and all its contents, including subdirectories. Be forewarned: use of this option can be dangerous.

--

Mark the end of options (rm still accepts -, the old form). Use this when supplying a filename beginning with -.

GNU/Linux and Mac OS X Options

-d, --directory

Remove directories, even if they are not empty. Available only to a privileged user.

-v, --verbose

Verbose mode (print the name of each file before removing it).

GNU/Linux Options

--no-preserve-root

Do not treat the root directory, /, specially.

--preserve-root

Do not operate recursively on the root directory, /.

Mac OS X Options

-P

Overwrite the contents of the to-be-removed files before deleting them. Each file is written with three different bit patterns: 0xff, 0x00, and then 0xff again.

-W

Undelete the named files. Only works for files covered by whiteouts.

Name

rmdir

Synopsis

    rmdir [options]directories

Delete the named directories (the directory itself, not the contents). directories are deleted from the parent directory and must be empty (if not, rm -r can be used instead). See also mkdir.

Common Option

-p, --parents

Remove directories and any intervening parent directories that become empty as a result; useful for removing subdirectory trees.

Solaris Option

-s

Suppress standard error messages caused by -p.

GNU/Linux Options

--ignore-fail-on-non-empty

Ignore failure to remove directories that are not empty.

-v, --verbose

Verbose mode; print a message for each directory as it is processed.

Name

rsync

Synopsis

    rsync [options] source ...dest

rsync synchronizes files across a network connection. It is particularly good for high-latency connections, and for synchronizing entire directory trees across machines. On Solaris, rsync is in /opt/sfw/bin; it may not be installed on your system. However, you can download it and compile and install it. This entry documents rsync 2.6.5, which is the most recent as of the time of this writing.

URL: http://rsync.samba.org/.

Source and destination specifications take three forms:

Pathname

A regular Unix pathname, representing a local file.

[user@]host:[path]

The file or directory path on remote host host as remote user user. With a single colon, rsync uses a remote shell such as ssh or rsh for its transfer mechanism. The remote username is optional, and the remote path defaults to the current users's home directory on the remote system. A relative path (one that does not start with /) is relative to the home directory on the remote system.

[user@]host::[path]

The file or directory path on remote host host as remote user user. With a double colon, rsync makes a direct TCP connection to port 873 on the remote machine, and expects to talk to another copy of rsync running in daemon mode.

If both source and destination are local pathnames, rsync synchronizes the two local files or directory trees. You may not specify a remote source together with a remote destination.

Using a trailing / on a directory name causes rsync to work on the contents of that directory, instead of starting with and copying the directory itself.

Primary Options

rsync has a large number of options. We document the most useful ones here; see the manpage for more information.

-a, --archive

Same as -rlptgoD. This provides recursion and synchronizes almost everything. Add -H to preserve hard links.

-b, --backup

Backup preexisting files before copying them.

--backup-dir= dir

With -b, indicates that backup copies should be stored in dir.

-c, --checksum

Use 128-bit MD4 checksums during the transfer. This increases reliability but severely slows down the synchronization.

-C, --cvs-exclude

Ignore the same files that CVS would. rsync starts with this list:

RCS SCCS CVS CVS.adm RCSLOG cvslog.* tags TAGS .make.state .nse_depinfo *~ #* .#* ,* _$* *$ *.old *.bak .BAK *.orig *.rej .del-* *.a *.olb *.o *.obj *.so *.exe *.Z *.elc *.ln core .svn/

It then adds files listed $HOME/.cvsignore and those in the CVSIGNORE environment variable. As it traverse directories, when it finds a .cvsignore file, rsync also ignores files listed therein. These rules are applied after --filter rules you supply.

--delete

Delete files on the receiving side that are not on the sending side. This applies only for recursive directory copies, not for individual files. Use with caution. You may wish to use -n first. See the manpage for details on this and other related options.

-eprogram, --rsh=program

Use program as the remote shell for communication with the remote system. By default, modern versions of rsync use ssh, the Secure Shell, but it's possible that rsync was configured differently. If you provide program as a quoted argument, you can include command-line arguments for it.

--exclude= pattern

Exclude files matching pattern. You can usually think of pattern as a shell-style wildcard; however, much more powerful patterns are possible; see the manpage for more information.

-g, --group

Make the group of the destination file be the same as the group of the source file. Only groups in the remote user's group set may be used. The default is to use group names, but sometimes numeric GID values are used; see the manpage for the details.

-h, --help

Print a command-line summary and exit.

-H, --hard-links

Preserve hard link information when copying files. This only works if both links are in the files being copied. This option can be slow, since rsync must keep track of more information.

--include= pattern

Include only files matching pattern. You can usually think of pattern as a shell-style wildcard; however, much more powerful patterns are possible; see the manpage for more information.

-l, --links

Re-create source symbolic links as symbolic links on the destination system.

-L, --copy-links

Follow symbolic links, copying the files they point to, not the symbolic links themselves.

-n, --dry-run

Do not actually transfer any files, just report what would happen.

-o, --owner

Make the owner of the destination file be the same as the owner of the source file. Often, changing ownership is a privileged operation, so this may not always work. The default is to use usernames, but sometimes numeric UID values are used; see the manpage for the details.

-p, --perms

Make the destination permissions be the same as the source permissions. Normally permissions on existing files are not changed.

--progress

Print running progress information during the transfer.

-q, --quiet

Decrease information during a transfer. Useful if invoking rsync from cron.

-r, --recursive

Copy directories recursively.

--rsync-path= program

Specify the path to the remote copy of rsync. Use this when rsync is not included in the PATH of the remote shell. The program is run on the remote system by a real shell, so it can be a (small) shell script; just be careful that it does not produce any output or read any input, so that rsync's communications are not affected.

-S, --sparse

Attempt to be efficient when transfering sparse files (those with holes in them) so that they take up less space on the destination system. Note: the manpage warns against using this option for destinations on Solaris tmpfs filesystems.

-t, --times

Make the modification time of the destination file be the same as that of the source file. You should always do this; it enables optimizations within rsync that make subsequent updates go faster.

-u, --update

Skip any destination files that have a newer modification time than the source file. Note, however, that the modification time doesn't matter if the files have a different type, for example a symbolic link source and a regular file destination; in such a case the update is always done.

-v, --verbose

Increase information during a transfer. Repeating the option increases verbosity; however, more than two -v options is useful only for debugging.

-x, --one-file-system

Do not cross filesystem boundaries when recursively copying directory trees.

-z, --compress

Compress file data as it's sent. Due to the way rsync works, this can achieve better performance than just using a remote shell that compresses data.

-0, --from0

Filenames read from a file are terminated with the zero byte, instead of a newline. This provides unambiguous interpretation of filenames. It does not apply to .cvsignore files.

See the manpage for a description of the other options.

Examples

Mirror a directory tree from an rsync server:

    rsync -avz archive.example.com::Cool_Stuff .

Synchronize the home directory on your laptop with that of your desktop system. Assume that the full path to your home directory is the same on both, and that you're using Bash or the Korn shell:

    laptop$ cd $HOME
    laptop$rsync -aHzv --delete desktop.example.com:$PWD/ ./

Name

samba

Synopsis

              Samba
 Tools For Working With SMB Filesystems

The Samba suite allows you to serve Unix filesystems to MS-Windows clients. It also allows you to make Unix printers available to MS-Windows systems. It provides considerable interoperability with those systems. Samba comes with GNU/Linux, and GNU/Linux systems can also mount SMB fileshares.

URL: http://www.samba.org.

Name

scp

Synopsis

    scp [options] file1 [...]file2

Securely copy files between hosts on a network, using ssh. Part of the OpenSSH suite of network tools. (See also ssh and sftp.) scp requests a password or passphrase if required. The transfer can be between two remote hosts. If more than one file is specified for file1, file2 should be a directory; otherwise, only the last file in the list is copied. file1 and file2 can be specified in any of the following ways:

              file
              host:file
              user@host:file

Common Options

-4

Use IPv4 addresses.

-6

Use IPv6 addresses.

-B

Run in batch mode. Don't ask for passwords or passphrases.

-c cipher

Specify the cipher to be used for encrypting the data.

-C

Enable ssh compression.

-F file

Use file as the per-user configuration file.

-i file

Specify the file that contains the identity (private key) for RSA authentication.

-o option

Specify an option to pass to ssh.

-p

Preserve modification time, access time, and mode.

-P port

Connect to port on the remote host.

-q

Don't display the progress meter.

-r

Copy directories recursively.

-S program

Specify the program to use for the encrypted connection. The program must understand ssh options.

-v

Verbose mode.

GNU/Linux and Mac OS X Options

-1

Force use of the SSH1 protocol.

-2

Force use of the SSH2 protocol.

-l count

Limit the bandwidth used to count Kbits per second.

Mac OS X Option

-E

Preserve extended attributes, such as resource forks. Both ends of the connection must be running Mac OS X 10.4 or later.

Name

screen

Synopsis

    screen [options] [command [args]]

Provide ANSI/VT100 terminal emulation, making it possible to run multiple full-screen pseudo-terminals from one real terminal, and letting you manipulate and save your screen input and output, copy and paste between windows, etc. Solaris does not have screen, but you can download and build it.

URL: http://www.gnu.org/software/screen.

Options

-a

Include all capabilities in each window's termcap.

-A

Adapt all windows to the size of the current terminal. Default is to try to use the previous window size.

-c file

Use file as the configuration file instead of the default $HOME/.screenrc.

-d

Detach session running elsewhere. With -r, reattach to this terminal. With -R, reattach to this terminal or create it if it doesn't already exist. With -RR, use the first session when reattaching if more than one session is available. With -m, start in detached mode.

-D

Detach session running elsewhere, logging out before detaching. With -r, reattach to this terminal. With -R, reattach to this terminal or create it if it doesn't already exist. With -RR, do whatever is necessary to create a new session. With -m, start in detached mode, but don't fork a new process.

-e xy

Change command characters. Specify x as the command character (default CTRL-A) and y as the character that generates a literal command character (default a). Specify in caret notation (e.g., ^A for CTRL-A).

-f, -fn, -fa

Turn flow control on, off, or to automatic switching mode.

-h num

Specify the size of the history scrollback buffer.

-i

Cause the interrupt key (usually CTRL-C) to interrupt the display immediately when flow control is on. Use of this option is discouraged.

-l, -ln

Turn login mode on or off for /var/adm/utmp updating. (The actual filename varies from system to system.)

-ls, -list

Print list of pid.tty.host strings identifying screen sessions.

-L

Tell screen that automargin terminal has a writable last position.

-m

Ignore the $STY environment variable and create a new session. With -d, start session in detached mode; useful for scripts. With -D, start session in detached mode but don't fork a new process; the command exits if the session terminates.

-O

Use optimal output mode for terminal rather than true VT100 emulation.

-p window

Preselect the specified window if it exists.

-q

Suppress error message printing on startup. Exit with nonzero return code if unsuccessful.

-r[pid.tty.host] -rsessionowner/[pid.tty.host]

Resume detached session. No other options except -d or -D can be specified. With sessionowner, resume another user's detached session; requires setuid root.

-R

Attempt to resume the first session found, or start a new session with the specified options. Set by default if screen is run as a login shell.

-s shell

Set the default shell, overriding the $SHELL environment variable.

-S name

Specify a name for the session being started.

-t name

Set the window's title.

-T term

Set $TERM to term instead of screen.

-U

Run in UTF-8 mode.

-v

Print version information and exit.

-wipe[match]

Like -ls, but remove destroyed sessions instead of marking them dead. If a match is specified, it should be in the same form as the argument to the -r option.

-x

Attach to a session that is not detached. Requires multi-display mode.

-X

Run specified command in specified session. Requires multi-display mode, and session must not be password-protected.

Name

script

Synopsis

    script [options] [file]

Create a record of your login session, storing in file everything that displays on your screen. The default file is called typescript. script records nonprinting characters as control characters and includes prompts. This command is useful for beginners or for saving output from a time-consuming command.

Common Option

-a

Append the script record to file.

GNU/Linux Options

-c command

Run command instead of creating an interactive shell. Useful for capturing the output of a command that acts differently when it's connected to a terminal.

-f

Flush output after each write. Useful if another person is monitoring the output file.

-q

Operate in quiet mode.

-t

Write timing data to standard error. Each entry has two fields: the first is the elapsed time since the last output, and the second is the number of characters in the current output.

Name

sdiff

Synopsis

    sdiff [options]file1 file2

Produce a side-by-side comparison of file1 with file2. Output is:

text text

Identical lines.

text <

Line that exists only in file1.

> text

Line that exists only in file2.

text | text

Lines that are different.

GNU/Linux and Mac OS X both use the GNU version of sdiff.

Common Options

-l, --left-column

List only lines of file1 that are identical.

-ooutfile, --output=outfile

Send identical lines of file1 and file2 to outfile; print line differences and edit outfile by entering, when prompted, the following commands:

e

Edit an empty file.

e b

Edit both left and right columns.

e l

Edit left column.

e r

Edit right column.

l

Append left column to outfile.

q

Exit the editor.

r

Append right column to outfile.

s

Silent mode; do not print identical lines.

v

Turn off "silent mode."

-s, --suppress-common-lines

Do not print identical lines.

-wcols, --width=cols

Set line length to cols (default is 130).

GNU sdiff Options

-a, --text

Treat all files as text and compare line-by-line.

-b, --ignore-space-change

Ignore differences in whitespace.

-B, --ignore-blank-lines

Ignore added or missing blank lines.

-d, --minimal

Use a different algorithm to find fewer changes. This option causes sdiff to run more slowly.

--diff-program= program

Use program in place of the standard version of diff.

-E, --ignore-tab-expansion

Ignore changes occurring because of tab expansion.

-H, --speed-large-files

Heuristically speed comparison of large files with many small scattered changes.

-i, --ignore-case

Ignore case changes.

--ignore-all-space

Ignore whitespace when comparing lines.

-Iregexp, --ignore-matching-lines=regexp

Ignore any changes that insert or delete lines matching the regular expression regexp.

--strip-trailing-cr

Ignore Carriage Return characters at the end of input lines.

-t, --expand-tabs

Convert tabs to spaces in the output to preserve alignment.

-v, --version

Print version information and exit.

-W, --ignore-all-space

Ignore horizontal whitespace when comparing lines.

Example

Show differences using 80 columns and ignore identical lines:

    sdiff -s -w80 list.1 list.2

Name

sed

Synopsis

    sed [options] [files]

Stream editor. Edit one or more files without user interaction. See Chapter 10 for more information on sed. The -e and -f options may be provided multiple times, and they may be used with each other. See also sed & awk, cited in the Bibliography.

Common Options

-e'instruction', --expression='instruction'

Apply the editing instruction to the files.

-fscript, --file=script

Apply the set of instructions from the editing script.

-n, --quiet, --silent

Suppress default output.

GNU/Linux and Mac OS X Option

-i[suffix], --in-place=[suffix]

Edit files in place, saving each original in a file created by concatenating suffix to the filename. A zero length suffix does not save a backup copy; this is not recommended.

GNU/Linux Options

-lcount, --line-length=count

Wrap lines at column count for the l command.

--posix

Disable all GNU extensions.

-r, --regex-extended

Use Extended Regular Expressions instead of Basic Regular Expressions (see Chapter 7).

-s, --separate

Process each file separately instead of treating them all as one long input stream.

-u, --unbuffered

Do not keep as much data in memory as sed would normally; flush output buffers more often.

Mac OS X Option

-E

Use Extended Regular Expressions instead of Basic Regular Expressions (see Chapter 7).

Name

sftp

Synopsis

    sftp [options]host

An interactive file transfer program, similar to ftp except that it uses ssh to perform file transfers securely. sftp connects to host and logs in, prompting for a password if required. The host can be specified in the following ways:

host
    [user@]host[:file [file] ...]
    [user@]host[:dir[/]]

If user is specified, that username is used for the login. If any files are specified, the sftp client automatically retrieves them after the user has been authenticated and then exits. If a directory dir is specified, the client starts in that directory on the remote host. sftp is part of the OpenSSH suite of network tools. See also ssh and scp.

Options

-1

Use SSH1. The default is to use SSH2.

-b file

Run in batch mode, taking commands from the specified file. Requires a noninteractive authentication mechanism.

-B bytes

Specify the size of the buffer sftp uses for file transfers. Default is 32768 bytes.

-C

Enable compression (uses ssh -C).

-F file

Use file as the ssh configuration file instead of the default system configuration file. The system-wide file is usually /etc/ssh/ssh_config and per-user files are $HOME/.ssh/config.

-o option

Pass an option to ssh. The passed option is in the format used by ssh_config(5) (e.g., -oPORT= nn, where nn is the port number). -o can appear more than once to pass multiple options to ssh. This option is useful for passing options that don't have an equivalent sftp command-line option.

-P server_path

Connect directly to the local sftp server specified in server_path. Useful for debugging.

-R num

Specify the number of requests that may be outstanding at any time (default is 16).

-ssubsys|server_path

Specify the SSH2 subsystem or path to the sftp server on the remote system. Specifying the path is useful for using sftp via SSH1 or if the remote sshd does not have an sftp subsystem configured.

-S program

Specify the name of a program that understands ssh options and that you want to use for the encrypted connection.

-v

Raise the logging level.

Name

sh

Synopsis

    sh [options] [arguments]

The standard command interpreter that executes commands from a terminal or a file. On commercial Unix systems, /bin/sh is often the original Bourne shell, which lacks features found in Bash and the Korn shell.

On some systems, /bin/sh may be a version of ksh88. (This is true of Solaris's /usr/xpg4/bin/sh.) On GNU/Linux, /bin/sh is a symbolic link to Bash, while on Mac OS X /bin/sh is a separate copy of Bash. See Chapter 4 for more information on Bash, ksh88, and ksh93, including command-line options.

Name

size

Synopsis

    size [options] [objfile ...]

Print the (decimal) number of bytes of each section of objfile. On many systems, if objfile is not specified, a.out is used. Solaris requires the objfile name. On Solaris, this program resides in /usr/ccs/bin.

Like the loader ld, this program has diverged across time and platforms, to the point where it's not worthwhile to provide an option list. The output format is also not the same across systems. See the manpage for your local system.

Name

sleep

Synopsis

    sleep seconds

Wait a specified number of seconds before executing another command. Often used in shell scripts. sleep is built in to ksh93.

The GNU/Linux version allows the number to have a suffix: s for seconds (the default), m for minutes, h for hours, and d for days. The value may also be real number, specifying fractional units as well.

Name

soelim

Synopsis

    soelim [files]

A preprocessor that reads nroff/troff input files, resolving and then eliminating .so requests. That is, input lines such as:

    .so header

are replaced by the contents of the file header. Normally, .so requests are resolved by nroff or troff. Use soelim whenever you are preprocessing the input (e.g., passing it through tbl or sed), and the complete text is needed prior to formatting. See also Chapter 18.

Example

Run a sed script on (all) input before formatting:

    soelim file | sed -e 's/--/\\(em/g' | nroff -mm - | lp

Name

sort

Synopsis

    sort [options] [files]

Sort the lines of the named files, typically in alphabetical order. See also uniq, comm, and join.

Mac OS X uses an early version of GNU sort that lacks long options as well as some of the features of the current GNU sort.

Common Options

-b, --ignore-leading-blanks

Ignore leading spaces and tabs.

-c, --check

Check whether files are already sorted, and if so, produce no output.

-d, --dictionary-order

Sort in dictionary order (ignore punctuation).

-f, --ignore-case

"Fold"; ignore uppercase/lowercase differences.

-i, --ignore-nonprinting

Ignore nonprinting characters (those outside ASCII range 040-176).

-kfieldspec, --key=fieldspec

Specify significance of input fields for sorting. See the fuller description below.

-m, --merge

Merge sorted input files.

-M, --month-sort

Compare first three characters as abbreviations for month names (Jan < Feb, etc.).

-n, --numeric-sort

Sort in arithmetic (numerical) order.

-ofile, --output=file

Put output in file.

-r, --reverse

Reverse the order of the sort.

-tc, --field-separator=c

Fields are separated with c (default is any whitespace).

-Tdir, --temporary-directory=dir

Use dir for temporary files.

-u, --unique

Identical lines in input file appear only one (unique) time in output.

+n[-m]

Skip n fields before sorting, and sort up to field position m. If m is missing, sort to end of line. Positions take the form a.b, which means character b of field a. If .b is missing, sort at the first character of the field. Counting starts at zero. Fields may have optional trailing modifiers, as in the -k option. Note: This method of describing fields is considered obsolete. Use -k instead.

Solaris Options

-S kmem

Adjust the amount of swap-based memory (in kilobytes) sort uses. Trailing suffixes of b, k, m, g, t, and %, allow specification of memory in bytes, kilobytes, megabytes, gigabytes and terabytes, or as a percentage of physical memory, respectively.

-y[kmem]

Adjust the amount of memory (in kilobytes) sort uses. If kmem is not specified, allocate the maximum memory. Obsolete: use -S instead.

-z recsz

Provide the maximum number of bytes for any one line in the file. This option prevents abnormal termination of sort in certain cases. Solaris sort accepts but otherwise ignores this option.

Gnu/Linux and Mac OS X Option

-s, --stable

Provide a stable sort, which preserves the order of input records that otherwise compare equal.

Gnu/Linux Options

-g, --general-numeric-sort

Sort in general numeric order.

-Ssize, --buffer-size=size

Like the Solaris -S option. Besides the suffixes listed there, GNU sort allows P, E, Z, and Y, each of which increases the possible amount by even more orders of magnitude.

-z, --zero-terminated

End lines with a zero byte, not with a newline.

Field Specifications for -k

A fieldspec has the form fieldstart [ type ][ ,fieldend [ type ]].

fieldstart

A field number and optional starting character of the form fnum [ .schar]. fnum is the field number, starting from 1. schar, if present, is the starting character within the field, also counting from 1.

fieldend

A field number and optional ending character of the form fnum [ .echar ]. fnum is the field number, starting from 1. echar, if present, is the last significant character within the field, also counting from 1.

type

A modifier, one of the letters b, d, f, i, M, n, or r. The effect is the same as the corresponding option, except that the b modifier only applies to the fields, not the whole line.

Examples

List files by decreasing number of lines:

    wc -l * | sort -rn

Alphabetize a list of words, remove duplicates, and print the frequency of each word:

    sort -fd wordlist | uniq -c

Sort the password file numerically by the third field (user ID):

    sort -k 3n -t: /etc/passwd

Find the top 20 disk hogs on a system:

    cd /home; du -sk * | sort -nr | head -n 20

Name

spell

Synopsis

    spell [options] [files]

Compare the words of one or more named files with the system dictionary and report all misspelled words. System files for spell reside in /usr/lib/spell.

Solaris and commercial Unix systems supply the original Unix version of spell. Mac OS X does not have spell; however, you can download either ispell or aspell and use them instead. GNU/Linux supplies both aspell and ispell, but not necessarily a spell command.

Program

URL(s)

aspell

http://aspell.net/

http://www.gnu.org/software/aspell

ispell

http://www.gnu.org/software/ispell

At least one major GNU/Linux system uses the following shell script to emulate spell:

    #!/bin/sh

    # aspell -l mimicks the standard unix spell program, roughly.

    cat "$@" | aspell -l --mode=none | sort -u

See also Classic Shell Scripting, cited in the Bibliography, which devotes an entire chapter to the topic of spell checking, including improvements to the previously shown script.

Solaris Options

-b

Check for British spelling.

-i

Ignore files included with the nroff or troff .so request. No effect if deroff is unavailable.

-l

Follow all included files (files named in .so or .nx requests); default is to ignore filenames that begin with /usr/lib.

-v

Include words that are derived from the dictionary list but are not literal entries.

-x

Show every possible word stem (on standard error).

+ wordlist

Use the sorted wordlist file as a local dictionary to add to the system dictionary; words in wordlist are not treated as misspelled.

Example

Run the first pass of spell :

    spell file1 file2 > jargon

After editing the jargon file, use it as a list of special terms. The second pass of spell produces genuine misspellings:

    spell +jargon file[12] > typos        Solaris spell

Name

split

Synopsis

    split [options] [infile] [outfile]

Split infile into several files of equal length. infile remains unchanged, and the results are written to outfile aa, outfile ab, etc. (default is xaa, xab, etc.). If infile is - (or missing), standard input is read. See also csplit.

Common Options

-n, -ln, --lines=n

Split infile into files, each n lines long (default is 1000).

-aslen, --suffix-length=slen

Use slen characters for the filename suffix. Default is 2.

-bn[m], --bytes=n[m]

Split into pieces of size n bytes. An optional multiplier m may be supplied: k for kilobytes and m for megabytes. GNU/Linux allows b for 512-byte blocks. Mutually exclusive with -l.

GNU/Linux Options

-Cbytes[m], --line-bytes=bytes[m]

Put a maximum of bytes into file; insist on adding complete lines. m is a multiplier: b for 512, k for 1024, and m for one megabyte.

-d, --numeric-suffixes

Use numeric file suffixes instead of alphabetic ones.

--verbose

Print a message for each output file.

Examples

Break bigfile into 1000-line segments:

    split bigfile

Join four files, then split them into ten-line files named new.aa, new.ab, etc. Note that without the -, new. would be treated as a nonexistent input file:

    cat list[1-4] | split -l 10 - new.

Name

ssh

Synopsis

    ssh [options] hostname [command]
    slogin [options] hostname [command]

Securely log a user into a remote system and run commands on that system. The version of ssh described here is the OpenSSH client. ssh can use either Version 1 (SSH1) or Version 2 (SSH2) of the SSH protocol. SSH2 is preferable, as it provides better encryption methods and greater connection integrity. The hostname can be specified either as hostname or as user@hostname. If a command is specified, the user is authenticated, the command is executed, and the connection is closed. Otherwise, a terminal session is opened on the remote system. See the "Escape characters" section later in this entry for functions that can be supported through an escape character. The default escape character is a tilde (~). The exit status returned from ssh is the exit status from the remote system or 255 if there was an error. Interestingly enough, Solaris, GNU/Linux, and Mac OS X all use OpenSSH . See also scp, sftp, and SSH, The Secure Shell, cited in the Bibliography.

On GNU/Linux and Mac OS X, slogin is a symbolic link to ssh. It is meant to replace the original BSD rlogin command.

URL: http://www.openssh.org.

Options

-1

Try only SSH1.

-2

Try only SSH2.

-4

Use only IPv4 addresses.

-6

Use only IPv6 addresses.

-a

Disable forwarding of the authentication agent connection.

-A

Allow forwarding of the authentication agent connection. Can also be specified on a per-host basis in a configuration file.

-b bind_address

Specify the interface to transmit from when there are multiple available interfaces or aliased addresses.

-cblowfish|3des|des|ciphers

Select the cipher for encrypting the session. The default is 3des. For SSH2, a comma-separated list of ciphers can also be specified, with the ciphers listed in order of preference. des is supported only for legacy SSH1 compatibility and otherwise should not be used.

-C

Enable compression. Useful mainly for slow connections. The default compression level can be set on a per-host basis in the configuration file with the CompressionLevel option.

-D port

Enable dynamic application-level port forwarding using port on the local side. Can be specified in the configuration file. Only a privileged user can forward privileged ports.

-echar|^char|none

Set the escape character (default ~). The escape character must be the first character on a line. If none is specified, disable the use of an escape character.

-f

Run interactively for user authentication, then go into background mode for command execution. Implies -n.

-F configfile

Specify a per-user configuration file (default is $HOME/.ssh/config).

-g

Allow remote hosts to connect to local forwarded ports.

-i idfile

Use idfile to read identity (private key) for RSA or DSA authentication. Default is $HOME/.ssh/id_rsa or $HOME/.ssh/id_dsa for SSH2, or $HOME/.ssh/identity for SSH1. You can specify more than one -i option on the command line or in the configuration file.

-I device

Specify a smartcard device from which to get the user's private RSA key.

-k

Disable Kerberos ticket and AFS token forwarding. Can be set on a per-host basis in the configuration file.

-l user

Log in as user on the remote system. Can be specified on a per-host basis in the configuration file.

-L port:host:hostport

Forward port on the local host to the specified remote host and port. Can be specified in the configuration file. Only a privileged user can forward privileged ports. For IPv6, an alternative syntax is port/host/hostport.

-m macspec

For SSH2, the contents of macspec specify message authentication code (MAC) algorithms to use. macspec is a comma-separated list of algorithms in order of preference.

-n

Get standard input as a redirection from /dev/null. Used to prevent reading from standard input, which is required when running ssh in the background. Useful for running X programs on a remote host.

-N

Do not execute a remote command. Useful with SSH2 for port forwarding.

-o option

Specify options in configuration-file format. Useful for specifying options that have no command-line equivalent.

-p port

Specify the port on the remote host to which ssh is to connect. Can be specified on a per-host basis in the configuration file.

-q

Run quietly, suppressing warnings and error messages.

-R port:host:hostport

Forward port on the remote host to the local host:hostport. Can be specified in the configuration file. You can forward privileged ports only if you are logged in as root on the remote host. For IPv6, an alternative syntax is port/host/hostport.

-s

For SSH2, request invocation of a subsystem on the remote host to be used for another application such as sftp. The desired subsystem is specified as the remote command.

-t

Force pseudo-tty allocation. Multiple -t options can be specified to force tty allocation even when ssh has no local tty.

-T

Disable pseudo-tty allocation.

-v

Verbose mode. Useful for debugging. Specify multiple -v options to increase verbosity.

-V

Display just the version number. GNU/Linux and Mac OS X only.

-x

Disable X11 forwarding.

-X

Enable X11 forwarding. Can be specified on a per-host basis in the configuration file.

Escape characters

~.

Disconnect.

~~

Send a single ~.

~#

List forwarded connections.

~&

Run ssh in the background at logout, while waiting for a forwarded connection or X11 sessions to terminate.

~?

Display the available escape characters.

~C

Open a command line. Useful for adding port forwardings when using the -L and -R options.

~R

Request rekeying of the connection. Useful only for SSH2 and if the peer supports it.

~^Z

Suspend the connection.

Name

ssh-add

Synopsis

    ssh-add [options] [files]
    ssh-add -e|-sreader

Add RSA or DSA identities to the authentication agent (see ssh-agent), which must be running. With no arguments specified, add the files $HOME/.ssh/id_rsa, $HOME/.ssh/id_dsa, and $HOME/.ssh/identity. If any files are specified, add those instead, prompting for a passphrase if required.

Options

-c

Confirm that an added identity should be used for authentication. The confirmation is done by the program named in the SSH_ASKPASS environment variable. GNU/Linux and Mac OS X only.

-d

Remove an identity from the agent instead of adding one.

-D

Delete all identities from the agent.

-e reader

Remove key in specified smartcard reader.

-l

List fingerprints of all identities known to the agent.

-L

List public key parameters of all identities known to the agent.

-s

Add key in smartcard reader.

-t life

Set maximum lifetime when adding identities to an agent. The value of life can be in seconds or another time format specified in sshd.

-x

Lock the agent with a password.

-X

Unlock the agent.

Name

ssh-agent

Synopsis

    ssh-agent [options] [command [arguments]]

Hold private keys used for public key authentication. ssh-agent is usually executed at the beginning of an X or login session; then all other windows or programs given as command are run as clients of ssh-agent. When a command is specified, the command and any arguments are executed. The agent dies when the command completes. Use ssh-add to add keys to the agent. Operations that require a private key are performed by the agent, which returns the results to the requestor.

Options

-a bind_addr

Bind the agent to the socket bind_addr (default is /tmp/ssh- nnnnnnnn /agent, where nnnnnnnn is a generated number).

-c

Write csh commands to standard output. This is the default if the environment variable SHELL looks like a csh-type shell.

-d

Debug mode.

-k

Kill the current agent.

-s

Write Bourne shell commands to standard output. This is the default if the environment variable SHELL does not look like a csh-type command.

-t life

Set maximum lifetime when adding identities to an agent. The value of life can be in seconds or another time format specified in sshd. GNU/Linux and Mac OS X only.

Name

ssh-keygen

Synopsis

    ssh-keygen [options]

Generate, manage, and convert authentication keys for ssh.

Common Options

-b bits

Specify the number of bits in the key. The minimum is 512 and the default is 1024.

-B

Show the bubblebabble digest (a digest represented as a string that looks like real words) for the private or public key file specified with -f.

-c

Change the comment in the private and public key files (for RSA1 keys only).

-C comment

Specify the new comment.

-e

Read an OpenSSH private or public key file and write it in SECSH Public Key File Format to standard output for exporting to a commercial SSH.

-f file

Specify the filename of the key file.

-i

Read an SSH2-compatible unencrypted private or public key file and write an OpenSSH-compatible key to standard output. Used to import keys from a commercial SSH.

-l

Show fingerprint of public or private RSA1 key file specified with -f.

-N passphrase

Specify the new passphrase.

-p

Change the passphrase for a private key file. Prompt for the file, the old passphrase, and twice for the new passphrase.

-P passphrase

Specify the old passphrase.

-q

Operate in quiet mode.

-t type

Specify the type of key to create. Possible values of type are rsa1 for SSH1, and rsa or dsa for SSH2.

-y

Read a private OpenSSH-format file and print a public key to standard output.

GNU/Linux and Mac OS X Options

-D reader

Download the RSA public key from the smartcard in reader.

-U reader

Upload an existing RSA private key to the smartcard in reader.

Mac OS X Options

-a trials

Make trials primatlity tests for DH-GEX candidates with -T.

-g

Use generic DNS record format.

-G file

Produce candidate primes for DH-GEX to file.

-M mem

Use mem megabytes when generating candidate moduli for DH-GEX.

-r hostname

Print DNS resource records using hostname.

-S start

Start at start (in hexadecimal) when generating candidate moduli for DH-GEX.

-T file

Test DH group exchange candidate primes for safety. Such primes are generated with -G.

-v

Be verbose. Helpful for debugging moduli generation. May be repeated up to three times to increase verbosity.

-W generator

Use generator when testing candidate moduli for DH-GEX.

Name

strings

Synopsis

    strings [options]files

Search object or binary files for sequences of four or more printable characters that end with a newline or null. See also od.

Common Options

-n, -nn, --bytes=n

Minimum string length is n (default is 4).

-, -a, --all

Search entire file, not just the initialized data portion of object files.

-o

Display the string's offset position before the string. Solaris and Mac OS X: same as -t d. GNU/Linux: same as -t o.

-tformat, --radix=format

Specify how to print string offsets. format is one of d, o, or x for decimal, octal, or hexadecimal, respectively.

GNU/Linux Options

-eencoding, --encoding=encoding

Specify the character encoding of the strings to be found. Possible values are:

b

16-bit big-endian

B

32-bit big-endian

l

16-bit little-endian

L

32-bit little-endian

s

Single-byte character, such as ASCII, ISO-8859, etc. (the default)

--target= format

Specify an alternative object code format to the system default. Any valid BFD target name may be used for format.

Name

strip

Synopsis

    strip [options]files

Remove information from ELF object files or archive files, thereby reducing file sizes and freeing disk space. On Solaris, strip is in /usr/ccs/bin.

Like the loader ld, this program has diverged across time and platforms, to the point where it's not worthwhile to provide an option list. See the manpage for your local system.

Name

stty

Synopsis

    stty [options] [modes]

Set terminal I/O options for the current device. Without options, stty reports the terminal settings, where a ^ indicates the Control key, and ^' indicates a null value. Most modes can be switched using an optional preceding - (shown in brackets). The corresponding description is also shown in brackets. As a privileged user, you can set or read settings from another device using the syntax:

    stty [options] [modes] <device

stty is one of the most complicated Unix commands. The complexity stems from the need to deal with a large range of conflicting, incompatible, and nonstandardized terminal devices—everything from printing teletypes to CRTs to pseudo-terminals for windowing systems. Only a few of the options are really needed for day-to-day use. stty sane is a particularly valuable one to remember.

Solaris provides additional hardware flow control modes and clock modes; see the stty(1) manpage should you find that you need these features.

Common Options

-a, --all

Report all option settings.

-g, --save

Report current settings.

GNU/Linux Options

-Fdevice, --file=device

Read or change setting of device instead of the current terminal.

Mac OS X Options

-e

Print information in BSD stty everything format.

-f device

Read or change setting of device instead of the current terminal.

Many but not all of the following features are shared among all the systems. For brevity, Solaris-only features are marked with an S, GNU/Linux-only features are marked with an L, and Mac OS X-only features are marked with an M. Items without any mark work on all the systems.

Control Modes

0

Hang up connection (set the baud rate to zero).

n

Set terminal baud rate to n (e.g., 19200).

[-]clocal

[Enable] disable modem control.

[-]cread

[Disable] enable the receiver.

[-]crtscts

[Disable] enable output hardware flow control using RTS/CTS.

[-]crtsxoff

[Disable] enable input hardware flow control using RTS. S.

cs n

Select character size in bits (5 ≤ n ≤ 8).

[-]cstopb

[One] two stop bits per character.

defeucw

Set the width in bytes per character and screen display columns per character, for EUC (Extended Unix Code) characters. S.

[-]hup

[Do not] hang up connection on last close.

[-]hupcl

Same as [-]hup.

ispeed n

Set terminal input baud rate to n.

ospeed n

Set terminal output baud rate to n.

[-]parenb

[Disable] enable parity generation and detection.

[-]parext

[Disable] enable extended parity generation and detection for mark and space parity. S.

[-]parodd

Use [even] odd parity.

Input Modes

[-]brkint

[Do not] signal INTR on break.

[-]icrnl

[Do not] map carriage return (^M) to newline (^J) on input.

[-]ignbrk

[Do not] ignore break on input.

[-]igncr

[Do not] ignore carriage return on input.

[-]ignpar

[Do not] ignore parity errors.

[-]imaxbel

[Do not] echo BEL when input line is too long.

[-]inlcr

[Do not] map newline to carriage return on input.

[-]inpck

[Disable] enable input parity checking.

[-]istrip

[Do not] strip input characters to 7 bits.

[-]iuclc

[Do not] map uppercase to lowercase on input. S, L.

[-]ixany

Allow [only XON] any character to restart output.

[-]ixoff

[Do not] send START/STOP characters when the queue is nearly empty/full.

[-]ixon

[Disable] enable START/STOP output control.

[-]parmrk

[Do not] mark parity errors.

[-]tandem

Same as [-]ixoff. L, M.

Output Modes

bs n

Select style of delay for backspaces (n = 0 or 1). S, L.

cr n

Select style of delay for carriage returns (0 ≤ n ≤ 3). S, L.

ff n

Select style of delay for formfeeds (n = 0 or 1). S, L.

nl n

Select style of delay for linefeeds (n = 0 or 1). S, L.

[-]ocrnl

[Do not] map carriage return to newline on output.

[-]ofdel

Set fill character to [NULL] DEL. S, L.

[-]ofill

Delay output with [timing] fill characters. S, L.

[-]olcuc

[Do not] map lowercase to uppercase on output. S, L.

[-]onlcr

[Do not] map newline to carriage return-newline on output.

[-]onlret

[Do not] perform carriage return after newline.

[-]onocr

[Do not] output carriage returns at column zero.

[-]opost

[Do not] postprocess output; ignore all other output modes.

[-]oxtabs

[Do not] expand tabs to spaces. M.

tab n

Select style of delay for horizontal tabs (0 ≤ n ≤ 3). S, L.

vt n

Select style of delay for vertical tabs (n = 0 or 1). S, L.

Local Modes

[-]altwerase

[Do not] Use an alternate algorithm for processing the "word erase" character. M.

[-]cbreak

Opposite of [-]icanon. L, M.

[-]ctlecho

Same as [-]echoctl. L, M.

[-]crterase

Same as [-]echoe. L, M.

[-]crtkill

Same as [-]echoke. L, M.

[-]echo

[Do not] echo every character typed.

[-]echoctl

[Do not] echo control characters as ^char, DEL as ^?.

[-]echoe

[Do not] echo ERASE character as BS-space-BS string.

[-]echok

[Do not] echo newline after KILL character.

[-]echoke

[Do not] BS-SP-BS erase entire line on line kill.

[-]echonl

[Do not] echo newline (^J).

[-]echoprt

[Do not] echo erase character as character is "erased."

[-]flusho

Output is [not] being flushed. S, M.

[-]icanon

[Disable] enable canonical input (ERASE and KILL processing).

[-]iexten

[Disable] enable extended functions for input data.

[-]isig

[Disable] enable checking of characters against INTR, QUIT, and SWITCH.

[-]lfkc

Same as [-]echok. Obsolete. S.

[-]mdmbuf

[Do not] flow control output based on the state of Carrier Detect. M.

[-]noflsh

[Enable] disable flush after INTR, QUIT, or SWITCH.

[-]pendin

[Do not] retype pending input at next read or input character. S, M.

[-]prterase

Same as [-]echoprt. L, M.

[-]stappl

[Line] application mode on a synchronous line. S.

[-]stflush

[Disable] enable flush on synchronous line. S.

[-]stwrap

[Enable] disable truncation on synchronous line. S.

[-]tostop

[Do not] send SIGTTOU when background processes write to the terminal.

[-]xcase

[Do not] change case on local output. S, L.

Control Assignments

ctrl-char c

Set control character to c. ctrl-char is:

Common

dsusp, eof, eol, eol2, erase, intr, kill, lnext, quit, rprnt, start, stop, susp, werase

Solaris

ctab, discard, reprint

GNU/Linux

swtch

Mac OS X

brk (same as eol), erase2, flush (same as discard), reprint, status

line i

Set line discipline to i (1 ≤ i ≤ 126). S, L.

min n

With -icanon, n is the minimum number of characters that will satisfy the read system call until the timeout set with time expires.

time n

With -icanon, n is the number of tenths of seconds to wait before a read system call times out. If the minimum number of characters set with min has been read, the read can return before the timeout expires.

Combination Modes

all

Like stty -a, but print information in the traditional BSD columnar format. M.

async

Set normal asynchronous communications. S.

cooked

Same as -raw.

[-]crt

[Disable] Enable echoe echok echoke. L, M.

[-]crtbs

Same as [-]echoe. M.

dec

Same as echoe echoctl echoke -ixany intr ^C erase 0177 kill ^U. L, M.

[-]decctlq

Converse of [-]ixany. L, M.

ek

Reset ERASE and KILL characters to system defaults.

[-]evenp

Same as [-]parenb and cs7[8].

everything

Same as stty all. M.

[-]extproc

Indicate that the terminal hardware or the remote side of a pty is [not] doing some of the terminal processing. M.

[-]kerninfo

[Disable] Enable the system's response to the status character, usually CTRL-T. M.

[-]lcase

[Un] set xcase, iuclc, and olcuc. S, L.

[-]litout

Converse of [-]opost. L, M.

[-]LCASE

Same as [-]lcase. S, L.

[-]markp

[Disable] enable parenb, parodd, and parext, and set cs7[8]. S.

new

Same as stty tty. M.

[-]newcrt

Same as [-]crt. M.

[-]nl

[Un] set icrnl and onlcr. -nl also unsets inlcr, igncr, ocrnl, and onlret.

[-]oddp

Same as [ -]parenb, [ -]parodd, and cs7[8].

old

Same as stty tty. M.

[-]parity

Same as [ -]parenb and cs7[8].

[-]pass8

Converse of [ -]parity. L, M.

[-]raw

[Disable] enable raw input and output (no ERASE, KILL, INTR, QUIT, EOT, SWITCH, or output postprocessing).

sane

Reset all modes to reasonable values.

size

Print the terminal's size in rows and columns. L, M.

speed

Print the terminal's speed (baud rate). L, M.

[-]spacep

[Disable] enable parenb and parext, and set cs7[8]. S.

[-]tabs

[Expand to spaces] preserve output tabs.

term

Set all modes suitable for terminal type term (tty33, tty37, vt05, tn300, ti700, or tek). (These predefined names are all so obsolete as to be useless.) S.

tty

Use the standard line discipline. M.

Window size

columns n

Set size to n columns. Can also be given as cols.

rows n

Set size to n rows.

xpixels n

Set size to n pixels across. S.

ypixels n

Set size to n pixels up and down. S.

Name

su

Synopsis

    su [option] [user] [shell_args]

Create a shell with the effective user ID of another user (that is, login as user). If no user is specified, create a shell for a privileged user (that is, become a superuser). Enter EOF to terminate. You can run the shell with particular options by passing them as shell_args (e.g., if the shell runs sh, you can specify -c command to execute command via sh, or -r to create a restricted shell).

su will inherit your environment settings. Administrators wishing to switch to a user's setup (perhaps to help them solve a problem) may wish to consider using this sequence:

    me$ su
                     Switch to root
    Password:                Enter root password
    # su -
                     user
                     Switch to other user
    user$

The sudo program is worth installing if your system doesn't have it. See http://www.sudo.ws/ and/or http://www.courtesan.com/sudo.

Common Option

-

Go through the entire login sequence (i.e., change to user's environment).

-ccommand, --command=command

Run a single command (by way of sh -c).

GNU/Linux and Mac OS X Options

-f, --fast

Pass -f on to csh or tcsh.

-l, --login

Same as su -.

-m, --preserve-environment

Preserve the environment.

GNU/Linux Options

-p

Same as -m.

-sshell, --shell=shell

Use shell if shell is listed in /etc/shells.

Name

tail

Synopsis

    tail [options] [file]

Print the last 10 lines of the named file. Use only one of -f or -r.

The GNU/Linux and Mac OS X versions can process multiple files. In that case, the output includes a header at the beginning of each file:

    =  =>filename<=  =

Historic Options

The syntaxes shown here are the historic usage. Currently all systems continue to accept them, but the -c and -n options are preferred.

-n[k]

Begin printing at n th item from end of file. k specifies the item to count: l (lines, the default), b (blocks), or c (characters, i.e., bytes).

- k

Same as previous, but use the default count of 10.

+n[k]

Like - n, but start at n th item from beginning of file.

+ k

Like - k, but count from beginning of file.

Common Options

-ccount, --bytes=count

With a leading + on count, start count bytes from the front of the file. With a leading - or no sign, start from the end of the file.

-f[follow_spec], --follow[=follow_spec]

Don't quit at the end of file; "follow" file as it grows. End with an INTR (usually ^C).

Only GNU/Linux allows a follow_spec. If the follow_spec is descriptor, tail follows the open file descriptor. This shows the original file, even if it is renamed or removed, and is the command's original, default behavior. If follow_spec is name, then tail periodically reopens the file by name. This is useful in cases where filenames change, such as rotated log files.

-ncount, --lines=count

With a leading + on count, start count lines from the front of the file. With a leading - or no sign, start from the end of the file.

Solaris and Mac OS X Option

-r

Copy lines in reverse order.

GNU/Linux Options

-F

Identical to --follow=name --retry.

--max-unchanged-stats= num

Used with --follow=name to reopen a file whose size hasn't changed after num iterations (default 5), to see if it has been unlinked or renamed (as with rotated log files).

--pid= pid

Used with -f to end when process ID pid dies.

-q, --quiet, --silent

Suppress filename headers.

--retry

With -f, keep trying to open a file even if it isn't accessible when tail starts or if it becomes inaccessible later.

-ssec, --sleep-interval=sec

With -f, sleep approximately sec seconds between iterations. Default is 1 second.

-v, --verbose

With multiple files, always output the filename headers.

Mac OS X Options

-b count

With a leading + on count, start count blocks (512-byte units) from the front of the file. With a leading - or no sign, start from the end of the file.

-F

Like the GNU/Linux --follow=name.

Examples

Show the last 20 lines containing instances of <title>:

    grep '<title>' file | tail -n 20

Continually track the latest system messages (under GNU/Linux):

    tail -f /var/log/messages

Show the last 10 characters of variable name:

    echo "$name" | tail -c

Reverse all lines in list :

    tail -r list

Name

talk

Synopsis

    talk user [@hostname] [tty]

Exchange typed communication with another user who is on the local machine or on machine hostname. talk might be useful when you're logged in via modem and need something quickly, making it inconvenient to telephone or send email. talk splits your screen into two windows. When connection is established, you type in the top half while user's typing appears in the bottom half. Type ^L to redraw the screen and ^C (or interrupt) to exit. If user is logged in more than once, use tty to specify the terminal line. The user needs to have used mesg y.

Notes

There are different versions of talk that use different protocols; interoperability across different Unix systems is very limited.

talk is also not very useful if the remote user you are "calling" is using a windowing environment, since there is no way for you to know which tty to use to get their attention. The connection request could easily show up in an iconified window! Even if you know the remote tty, the called party must have done a mesg y to accept the request, and the called system must allow incoming talk connections. All in all, this command is not as useful as it once was.

Name

tar

Synopsis

    tar [options] [files]

Copy files to or restore files from tape (tape archive). If any files are directories, tar acts on the entire subtree. (See also cpio and pax.)

Options are supplied as one group, with any arguments placed afterward in corresponding order. Originally, tar did not even accept a leading - on its options. Although the Solaris version allows one, it does not require it. On many other Unix systems, you may use conventional option notation, with each option preceded by a dash and separated from the other options with whitespace. Some systems actually require the use of separate options. Check your local documentation for the final word.

GNU/Linux and Mac OS X both use the GNU version of tar which accepts all the common options, and also has many options of its own.

Notes

For the following reasons, tar is best used as a way to exchange file or source code archives over a network. A system administrator performing system backups is advised to use the vendor-supplied backup program (typically called dump or backup; see your local documentation) for backups instead of tar. (Many of these same points apply to cpio and to pax as well.)

Most Unix versions of tar preserve the leading / from an absolute filename in the archive. This makes it difficult or impossible to extract the files on a different system.

The tar archive format was designed when Unix file and directory names were short (14 characters maximum). Modern Unix systems allow individual filenames to be up to 255 characters in length, but the tar archive header has a limit of 100 characters for the entire pathname. This makes it difficult or impossible in practice to archive a typical Unix filesystem.

In general, Unix versions of tar cannot recover from data errors, which are particularly common with tapes. An early tape error can render an entire tar tape useless.

While tar does checksum the header information describing each archived file, it does not checksum the actual data blocks. Thus, if a data block becomes corrupted on a tape, tar will never notice.

The GNU version of tar has extensions to get around many of these problems, at the cost of portability of the archive format to non-GNU versions. Source code can be obtained from the Free Software Foundation (see http://www.gnu.org/software/tar).

Common Control Option

-Cdir files, --directory=dir files

Change directory to dir before adding files to the archive. Use relative pathnames. This option makes it possible to archive files that don't share a common ancestor directory.

Solaris Control Options

-I file

Read a list of filenames to be archived, one filename per line, from file. Useful when there are too many files to name on the command line.

-X file

Exclude files. The corresponding file argument is read for a list of relative pathnames, one per line, of files that should not be archived. This option may be provided multiple times with multiple files. Filenames that appear here are excluded even if the same name was provided in a file used with -I.

GNU tar Control Options

-Tfile, --files-from=file

Read a list of filenames to be archived, one filename per line, from file. Useful when there are too many files to name on the command line.

-Xfile, --exclude-from=file

Exclude files. The corresponding file argument is read for a list of relative pathnames, one per line, of files that should not be archived. Each line may be a shell wildcard pattern. This option may be provided multiple times with multiple files.

Common Function Options (Choose One)

-c, --create

Create a new archive.

-r, --append

Append files to archive.

-t, --list

Table of contents. Print the names of files if they are stored on the archive (if files not specified, print names of all files).

-u, --update

Update. Add files if not in archive or if modified.

-x, --extract, --get

Extract files from archive (if files not specified, extract all files).

GNU tar Function Options (Choose One)

-A, --catenate, --concatenate

Concatenate a second tar file to the end of the first.

-d, --diff, --compare

Compare the files stored in tarfile with other-files. Report any differences: missing files, different sizes, different file attributes (such as permissions or modification time).

--delete

Delete from the archive. This option cannot be used with magnetic tape.

Common Options

n[c]

Select tape drive n and use speed c. n is 0–7 (default is 0); c is l (low), h (high), or m (medium, the default). Used to modify arch. (These are highly system-specific and nonportable: it is much better to always just specify the arch explicitly with -f.)

-bn, --blocking-factor=n

Use blocking factor n (default is 1; maximum is 20). Different Unix systems often allow larger blocking factors.

-B, --read-full-records

Continue reading until logical blocks are full. For use across Ethernet connections with rsh or ssh. On some systems, enabled by default when reading standard input.

-farch, --file=arch

Store files in or extract files from archive arch; arch is usually a device name (default varies from system to system). If arch is -, standard input or output is used as appropriate (e.g., when piping a tar archive to a remote host). GNU tar allows remote tape drives, of the form host:device.

-h, --dereference

Follow symbolic links, archiving the files they point to, not the links themselves.

-m, --touch

Do not restore file modification times; update them to the time of extraction.

-p, --same-permissions, --preserve-permissions

Preserve permissions of extracted files. On Solaris, ACLs are restored if recorded in the archive and are added to the archive when used with -c.

-v, --verbose

Print function letter (x for extraction or a for archive) and name of files. With -t, print a listing similar to that of ls -l.

-w, --interactive, --confirmation

Wait for user confirmation (y) before taking any actions.

Solaris Options

-D

Warn about changes in data files instead of treating them as fatal errors; for example, if a file's size changes while it's being archived.

-e

Exit immediately upon unexpected errors.

-E

Use an extended header that allows longer filenames, larger files, and other extensions. Not portable.

-F, -FF

With F, do not archive SCCS and RCS directories. With FF, also exclude files named a.out, core, errs, and all .o files.

-i

Ignore directory checksum errors.

-k size

Specify the archive size in kilobytes. Archives that are larger than size are split across volumes. Useful for fixed-size media, such as floppy disks.

-l

Print error messages about links that can't be found.

-n

Archive is not a tape device. This allows tar to seek, instead of doing sequential reads, which is faster.

-o

Change ownership of extracted files to that of user running program. This is the default for nonprivileged users.

-P

Do not add a trailing / to directory names in the archive.

-q

Quit after extracting the first occurrence of the named file. Normally tar continues reading the archive.

-@

Add Solaris extended file attributes to the archive upon archive creation, or extract them from the archive if extracting. They may only be extracted as part of extracting a file; it is not possible to extract just the extended attributes.

GNU tar Options

--anchored

Exclude patterns must match the start of the filename (the default).

--atime-preserve

Preserve original access time on extracted files.

--backup[=type]

Instead of overwriting files upon extraction, back them up. If no backup type is specified, a simple backup is made with ~ as the suffix. (See also --suffix.) The possible values of type are:

t, numbered

Make numbered backups.

nil, existing

Make numbered backups if there are already numbered backups, otherwise make simple backups.

never, simple

Always make simple backups.

--check-links

When creating an archive, if a file has multiple hard links, and not all the file's links were written to the archive, output a warning message.

--checkpoint

List directory names encountered.

--exclude= pattern

Remove files matching pattern from any list of files.

--force-local

Interpret filenames in the form hostname:filename as local files.

--format= type

Create a type format archive. Valid values are gnu, oldgnu, posix, ustar, and v7.

-Fscript, --info-script=script

--new-volume-script= script

Implies -M (multiple archive files). Run script at the end of each file.

-gfile, --listed-incremental=file

Create new-style incremental backup.

--group= group

Use group as the group for files added to the archive.

-G, --incremental

Create old-style incremental backup.

-i, --ignore-zeros

Ignore zero-sized blocks (i.e., EOFs).

--ignore-case

Ignore case when excluding files.

--ignore-failed-read

Ignore unreadable files to be archived. Default behavior is to exit when encountering these.

--index-file= file

Send verbose output to file instead of to standard output.

-j, --bzip2

Compress files with bzip2 before archiving them, or uncompress them with bunzip2 before extracting them.

-k, --keep-old-files

When extracting files, do not overwrite files with identical names. Instead, print an error message.

-Kfile, --starting-file=file

Begin tar operation at file in archive.

--keep-newer-files

If a file being extracted is newer than the one in archive, do not replace it.

-l, --one-file-system

Do not archive files from other filesystems. Note: in the future, the meaning of -l will change to --check-links.

-Llength, --tape-length=length

Write a maximum of length × 1024 bytes to each tape.

--mode= permissions

Use permissions when adding files to an archive. The permissions are specified the same way as for the chmod command.

-M, --multivolume

Expect archive to be multivolume. With -c, create such an archive.

--newer-mtime= date

Add only files whose contents have changed since date to the archive.

--no-anchored

Exclude patterns may match after any slash.

--no-ignore-case

Do not ignore case when excluding files.

--no-recursion

Do not move recursively through directories.

--no-same-owner

When extracting, create files with yourself as owner.

--no-same-permissions

Do not extract permissions information when extracting files from the archive. This is the default for users, and therefore affects only the superuser.

--no-wildcards

Don't use wildcards when excluding files; treat patterns as strings.

--no-wildcards-match-slash

Wildcards do not match / when excluding files.

--null

Allow filenames to be null-terminated with -T. Override -C.

--numeric-owner

Use the numeric owner and group IDs rather than the names.

-Ndate, --newer=date, --after-date=date

Ignore files older than date.

-o

If creating an archive, same as --old-archive. If extracting, same as --no-same-owner.

--occurrence[=num]

Process only the num th occurrence of each named file. For use with --delete, --diff, --extract, or --list.

--old-archive, --portability

Create old-style archive in Unix V7 rather than POSIX format.

--overwrite

Overwrite existing files and directory metadata when extracting from archive.

--overwrite-dir

Overwrite existing directory metadata when extracting from archive.

--owner= owner

Set owner as the owner of extracted files instead of the original owner. owner is first assumed to be a username, then, if there is no match, a numeric user ID.

-O, --to-stdout

Print extracted files to standard output.

--pax-option= keywords

For use with posix format archives, process the keywords appropriately. See the online Info manual for the (complicated) details.

--posix

Create a POSIX-compliant archive.

--preserve

Equivalent to invoking both the -p and -s options.

-P, --absolute-names

Do not remove initial slashes (/) from input filenames.

--record-size= size

Treat each record as having size bytes, where size is a multiple of 512.

--recursion

Move recursively through directories.

--recursive-unlink

Remove existing directory hierarchies before extracting directories with the same name.

--remove-files

Remove originals after inclusion in archive.

--rmt-command= command

Use command on a remote host to perform remote file operations instead of /usr/local/libexec/rmt (or whatever was configured into tar when it was built).

--rsh-command= command

Do not connect to remote host with rsh; instead, use command.

-R, --block-number

Display archive's block number in messages.

-s, --same-order, --preserve-order

When extracting, sort filenames to correspond to the order in the archive.

--same-owner

When extracting, create files with the same ownership as the originals.

--show-defaults

Show the default options and exit successfully. For use in shell scripts.

--show-omitted-dirs

List directories being omitted when operating on an archive.

--strip-path= count

Strip count leading components off of archived pathnames before extraction.

--suffix= suffix

Use suffix instead of the default ~ when creating a backup file.

-S, --sparse

Treat sparse files more efficiently when adding to archive.

--totals

Print byte totals.

--use-compress-program= program

Compress archived files with program, or uncompress extracted files with program.

--utc

Display file modification times in UTC instead of in local time.

-U, --unlink-first

Remove each existing file from the filesystem before extracting from the archive.

-v, --verbose

Verbose. Print filenames as they are added or extracted.

--volno-file= file

Use/update the volume number in file.

-Vname, --label=name

Name this volume name.

--wildcards

Use wildcards when excluding files.

--wildcards-match-slash

Wildcards match / when excluding files.

-W, --verify

Check archive for corruption after creation.

-z, --gzip, --gunzip, --ungzip

Compress files with gzip before archiving them, or uncompress them with gunzip before extracting them.

-Z, --compress, --uncompress

Compress files with the old compress command before archiving them, or uncompress them with uncompress before extracting them.

Examples

Create an archive of /bin and /usr/bin (c), show the command working (v), and write on the tape in /dev/rmt/0 :

    tar -cvf /dev/rmt/0 /bin /usr/bin

List the archive's contents in a format like ls -l:

    tar -tvf /dev/rmt/0

Extract the /bin directory:

    tar -xvf /dev/rmt/0 /bin

Create an archive of the current directory, and store it in a file /tmp/backup.tar on the system. (Backing up a directory into a file in that directory almost never works.)

    tar -cvf /tmp/backup.tar .

Similar, but compress the archive file:

    tar -cvf - . | gzip > /tmp/backup.tar.gz

(The - tells tar to store the directory on standard output, which is then redirected through the pipe.)

Do the same, but using GNU tar:

    tar -cvzf /tmp/backup.tar.gz .

Copy a directory tree from one location to another:

    # cd olddir; tar -cf - . | (cd newdir; tar -xvpf -)

Name

tcsh

Synopsis

    tcsh [options] [file [arguments]]

An extended version of the C shell, a command interpreter into which all other commands are entered. For more information, see Chapter 5.

Name

tee

Synopsis

    tee [options] [files]

Duplicate the standard input ; send one copy to standard output and another copy to files.

Options

-a, --append

Append output to files.

-i, --ignore-interrupts

Ignore all interrupts.

Examples

Display a who listing on the screen and store it in two files:

    who | tee userlist ttylist

Display misspelled words and add them to existing typos :

    spell ch02 | tee -a typos

Name

telnet

Synopsis

    telnet [options] [host [port]]

Communicate with another host using the Telnet protocol. host may be either a name or a numeric Internet address (dot format). telnet has a command mode (indicated by the telnet> prompt) and an input mode (usually a login session on the host system). If no host is given, telnet defaults to command mode. You can also enter command mode from input mode by typing the escape character ^]. In command mode, type ? or help to list the available commands.

Tip

In days of yore, telnet used a direct, clear, unencrypted data stream for all information, including login names and passwords. Doing so today is terribly insecure, and you should not use telnet if you cannot use the encryption facility. (See ssh for an alternative.) Nevertheless, telnet remains useful for network debugging; for example, connecting directly to SMTP, POP3, or IMAP servers for testing.

Common Options

-8

Use an eight-bit data path. This negotiates the BINARY option for input and output.

-a

Attempt an automatic login. This is the default on Mac OS X.

-c

Don't read $HOME/.telnetrc at startup.

-d

Set the debug option to true.

-e c

Use c as the escape character. The default is ^]. A null value disables the escape character mechanism.

-E

Don't have an escape character.

-f

If using Kerberos, forward the local credentials to the remote system.

-F

Like -f, but includes credentials that were already forwarded to the local system too.

-k realm

For Kerberos, obtain a ticket for the remote host from the realm realm, instead of the remote host's default realm.

-K

Do not allow automatic login to the remote system.

-l user

Use the ENVIRON option to pass the value of the USER environment variable.

-L

Use an eight-bit data path on output. This negotiates the BINARY option only for output.

-n file

Record trace information in file.

-r

Provide an rlogin-style interface, in which the escape character is ~ and is only recognized after a carriage return. The regular telnet escape character must still be used before a telnet command. "~. ENTER" and "~ ^Z" terminates or stops a session, respectively.

-x

Enable encryption if possible. This is the default on Mac OS X.

-X atype

Disable authentication type atype.

Solaris Host Specification

[[!]@host1[@host2 ...]] desthost

Uses loose source routing to desthost, sending the connection through host1, host2, .... With a leading !, uses strict source routing. IPv6 connections may use only loose source routing.

GNU/Linux Options

-7

Strip the eighth bit on input and output.

-b hostalias

Use bind(2) to bind the local socket to an aliased address or the address of an interface other than the one that would be chosen by connect(2).

Mac OS X Options

-4

Use IPv4.

-6

Use IPv6.

-N

Do not do IP address to name lookup if the remote host is provided as an IP address.

-s source_address

Set the source IP address of the connection to source_address. Both IP addresses and hostnames may be used.

-S tosval

Set the IP type-of-service option to tosval, which may be numeric, or a symbolic name from /etc/iptos, if that file exists.

-u

Use a Unix Domain socket, i.e., one accessed as a file pathname.

-y

Do not encrypt the data stream.

Name

test

Synopsis

    test expression
            or
    [ expression ]

Evaluate an expression and, if its value is true, return a zero exit status ; otherwise, return a nonzero exit status. In shell scripts, you can use the alternate form [ expression ]. The brackets are typed literally and must be separated from expression. Generally, this command is used with conditional constructs in shell programs. See Chapter 4 for more information on test.

Name

time

Synopsis

    time [option] command [arguments]

Execute a command with optional arguments and print the total elapsed time, execution time, process execution time, and system time of the process (all in seconds). Times are printed on standard error. time is a built-in command in all of the Bash, Korn, and C shells. This entry describes the external command that lives in the filesystem.

Common Option

-p, --portability

Print the real, user, and system times with a single space separating the title and the value, instead of a tab. (Mac OS X uses a tab.)

GNU/Linux Options

-a, --append

Used with -o to append the output to file instead of overwriting it.

-fformat, --format=format

Specify the output format. Overrides any format specified in the TIME environment variable.

-ofile, --output=file

Send the output from time to the specified file instead of to standard error. If file exists, it is overwritten.

-v, --verbose

Give verbose output, providing all available information.

-V, --version

Print version information and exit.

Mac OS X Option

-l

Print the contents of the process's struct rusage structure. See getrusage(2).

Name

touch

Synopsis

    touch [options] [date]files

For one or more files, update the access time and modification timestamp to the current time and date, or update to the optional date. date is a date and time in the format mmddhhmm [ yy ]. touch creates the files if they don't exist. touch is useful in forcing other commands to handle files a certain way; e.g., the operation of make, and sometimes find, relies on a file's access and modification times.

Common Options

-a, --time=access, --time=atime, --time=use

Update only the access time.

-c, --no-create

Do not create nonexistent files.

-m, --time=modify, --time=mtime

Update only the modification time.

-rfile, --reference=file

Use the access and/or modification times of file instead of the current time.

-t time

Use the time as it is provided by time, which has the form [[ cc ]yy ]mmddhhmm [. ss ].

GNU/Linux Options

-dtime, --date=time

Change the time value to the specified time instead of the current time. time can use several formats and may contain month names, time zones, a.m. and p.m. strings, etc.

-f

Accepted but ignored.

Mac OS X Option

-f

Force; attempt to update the times, even if the file permissions do not allow it.

Name

tr

Synopsis

    tr [options] [string1 [string2]]

Copy standard input to standard output, performing substitution of characters from string1 to string2 or deletion of characters in string1. Some older System V systems require that string1 and string2 be enclosed in square brackets. (This is true of Solaris's /usr/bin/tr, for example.) Most other versions do not have this requirement. POSIX-compliant versions do not have this requirement either.

Common Options

-c, --complement

Complement characters in string1 with characters in the current character set. The complement is the set of all characters not in string1. This option works in terms of byte values.

-d, --delete

Delete characters in string1 from output.

-s, --squeeze-repeats

Squeeze out repeated output characters in string2.

Solaris and Mac OS X Option

-C

Like -c, but work in terms of characters, which may be multibyte values, depending upon the local character set.

GNU/Linux Option

-t, --truncate-set1

Truncate string1 to the length of string2 before processing the input.

Mac OS X Option

-u

Force output to be unbuffered.

Examples

Change uppercase to lowercase in a file:

    tr  'A-Z'   'a-z'  < file      Modern systems, traditional BSD
    tr '[A-Z]' '[a-z]' < fileOld System V systems

Modern systems allow the use of character classes:

    tr '[:upper:]' '[:lower:]' < file

Turn spaces into newlines (ASCII code 012):

    tr ' ' '\012' < file

Strip blank lines from file and save in new.file (or use \011 to change successive tabs into one tab):

    tr -s "" "\012" < file > new.file

Delete colons from file; save result in new.file :

    tr -d : < file > new.file

Make long search path more readable:

    echo $PATH | tr ':' '\n'

Name

troff

Synopsis

    troff [options] [files]

Document formatter for laser printer or typesetter. See Chapter 18.

Name

true

Synopsis

    true

A do-nothing command that returns a successful (zero) exit status. Normally used in Bourne shell scripts. See also true.

true is built into most modern shells.

Name

tset

Synopsis

    tset [options] [type]

Set terminal modes. Without arguments, the terminal is reinitialized according to the TERM environment variable. tset is typically used in startup scripts (.profile or .login). type is the terminal type; if preceded by a ?, tset prompts the user to enter a different type, if needed. Press the ENTER key to use the default value, type. On Solaris, this command is found is /usr/ucb. See also reset.

Common Options

-

Print terminal name on standard output; useful for passing this value to TERM.

-e c

Set erase character to c; default is ^H (backspace).

-i c

Set interrupt character to c (default is ^C).

-I

Do not output terminal initialization setting.

-k c

Set line-kill character to c (default is ^U).

-m[port[baudrate]:type]

Declare terminal specifications. port is the port type (usually dialup or plugboard). tty is the terminal type; it can be preceded by ? as above. baudrate checks the port speed and can be preceded by any of these characters:

>

Port must be greater than baudrate.

<

Port must be less than baudrate.

@

Port must transmit at baudrate.

!

Negate a subsequent >, <, or @ character.

?

Prompt for the terminal type. With no response, use the given type.

-Q

Do not print "Erase set to" and "Kill set to" messages.

-r

Report the terminal type.

-s

Return the values of TERM assignments to shell environment. This is a commonly done via eval 'tset -s' (in the C shell, you would surround this with the commands set noglob and unset noglob).

Solaris Option

-n

Initialize "new" tty driver modes. Useless because of redundancy with the default stty settings that incorporate the functionality of the BSD "new" tty driver.

GNU/Linux and Mac OS X Options

-q

Print the terminal type on standard output but do not initialize the terminal.

-V

Print the version of ncurses used for this program and exit.

Examples

Set TERM to wy50:

    eval 'tset -s wy50'

Prompt user for terminal type (default is vt100):

    eval 'tset -Qs -m '?vt100''

Similar to above, but the baudrate must exceed 1200:

    eval 'tset -Qs -m '>1200:?xterm''

Set terminal via modem. If not on a dial-in line, the ?$TERM causes tset to prompt with the value of $TERM as the default terminal type:

    eval 'tset -s -m dialup:'?vt100' "?$TERM"'

Name

tty

Synopsis

    tty [options]

Print the device name of your terminal. This is useful for shell scripts and often for commands that need device information.

Common Option

-s, --quiet, --silent

Return only the codes: 0 (a terminal), 1 (not a terminal), 2 (invalid options used).

Solaris Option

-l

Print the synchronous line number, if on an active synchronous line.

Name

type

Synopsis

    type program ...

Print a description of program, i.e., whether it is a shell built-in, a function, or an external command. type is built into the Bash and Korn shells. See Chapter 4 and also see which.

Example

Describe cd and ls:

    $ type cd ls
                     From Bash
    cd is a shell builtin
    ls is hashed (/bin/ls)

Name

umask

Synopsis

    umask [value]

Print the current value of the file creation mode mask , or set it to value, a three-digit octal code specifying the read-write-execute permissions to be turned off when new files are created. Normally used in .login or .profile. umask is a built-in command in the Bash, Korn, and C shells (see Chapters 4 and 5).

umask number

File permission

Directory permission

0

rw-

rwx

1

rw-

rw-

2

r--

r-x

3

r--

r--

4

-w-

-wx

5

-w-

-w-

6

---

--x

7

---

---

Examples

Turn off write permission for others:

    umask 002                Produces file permission -rw-rw-r--

Turn off all permissions for group and others:

    umask 077                Produces file permission -rw-------

Note that you can omit leading zeroes.

Name

uname

Synopsis

    uname [options]

Print the current Unix system name.

Common Options

-a, --all

Report the information supplied by all the other options.

-m, --machine

The hardware name.

-n, --nodename

The node name.

-p, --processor

The host's processor type.

-r, --kernel-release

The operating system release.

-s, --kernel-name

The system name. This is the default action when no options are provided.

-v, --kernel-version

The operating system version.

Solaris and GNU/Linux Option

-i, --hardware-platform

The hardware platform name. (For example on Solaris, SUNW,Ultra-4; compare to sparc from -p.)

Solaris Options

-S name

Change the nodename to name. Privileged users only.

-X

Print expanded information as expected by SCO Unix systems.

GNU/Linux Option

-o, --operating-system

Print the operating system name.

Name

umount

Synopsis

    umount [options] [arguments]

Unmount a filesystem. This command is very system-specific. See the umount entries in the sections for each operating system.

Name

unexpand

Synopsis

    unexpand [options] [files]

Convert spaces back into an appropriate number of tab characters. unexpand reads the named files, or standard input if no files are provided. See also expand.

Common Options

-a, --all

Replace spaces with tabs everywhere possible, not just leading spaces and tabs.

-ttablist, --tabs=tablist

Interpret tabs according to tablist, a space- or comma-separated list of numbers in ascending order that describes the "tabstops" for the input data.

GNU/Linux Option

--first-only

Convert only leading whitespace into tabs. Overrides -a.

Name

uniq

Synopsis

    uniq [options] [file1 [file2]]

Remove duplicate adjacent lines from sorted file1, sending one copy of each line to file2 (or to standard output). Often used as a filter. Specify only one of -c, -d, or -u. See also comm and sort.

Common Options

-c, --count

Print each line once, counting instances of each.

-d, --repeated

Print duplicate lines once, but no unique lines.

-fn, --skip-fields=n

Ignore first n fields of a line. Fields are separated by spaces or by tabs.

-sn, --skip-chars=n

Ignore first n characters of a field.

-u, --unique

Print only unique lines (no copy of duplicate entries is kept).

- n

Like -f. This original, pre-POSIX syntax is deprecated; use -f instead.

+n

Like -s. This original, pre-POSIX syntax is deprecated; use -s instead.

GNU/Linux Options

-D, --all-repeated[=method]

Print all duplicate lines. -D takes no delimiter method. The delimiter method method describes how uniq should delimit groups of repeated lines in the output. It takes one of the values none (default), prepend (output a newline before each group), or separate (output a newline after each group).

-i, --ignore-case

Ignore case differences when checking for duplicates.

-wn, --check-chars=n

Compare only first n characters per line (beginning after skipped fields and characters).

Examples

Send one copy of each line from list to output file list.new (list must be sorted):

    uniq list list.new

Show which names appear more than once:

    sort names | uniq -d

Show which lines appear exactly three times:

    sort names | uniq -c | awk '$1 =  = 3'

Name

units

Synopsis

    units
    units [options] [from-unit to-unit]

Interactively supply a formula to convert a number from one unit to another. Use EOF to exit. Known units are maintained in a system table, and the GNU/Linux and Mac OS X versions let you supply your own units file. They also allow you to supply units on the command line, so that the program can be used in a batch fashion.

GNU/Linux and Mac OS X Common Options

-ffile, --file=file

Read units from file.

-q, --quiet, --silent

Do not prompt, and do not display statistics.

GNU/Linux Options

-c, --check

Verify that all units reduce to primitive units.

--check-verbose

Like -c, but list the units as they're checked, for finding infinite loops.

-e, --exponential

Use exponential format output.

-h, --help

Print a command-line summary and exit.

-oformat, --output-format=format

Use printf(3)-style format format for formatting values. format should be appropriate for a floating-point value.

-s, --strict

Do not do the reciprocal unit conversion.

-v, --verbose

Be more verbose.

-V, --version

Print version information and exit.

Mac OS X Option

-v

Print the version number.

Name

unix2dos

Synopsis

    unix2dos [options]unixfile dosfile

Solaris and GNU/Linux only. Convert files using the ISO standard characters to their DOS counterparts. If unixfile and dosfile are the same, the file is overwritten after the conversion is done. See also dos2unix.

For the GNU/Linux version, the options are the same as for dos2unix; see the dos2unix entry for the list.

Solaris Options

-ascii

Add extra carriage returns for use under DOS.

-iso

Same as the default action.

-437

Use the US code page.

-7

Convert 8-bit Solaris characters to 7-bit DOS characters.

-850

Use the multilingual code page.

-860

Use the Portugese code page.

-863

Use the French Canadian code page.

-865

Use the Danish code page.

Name

unzip

Synopsis

    unzip [options[modifiers]] zipfile ... [extraction options]
    unzip -Z [zipinfo options] zipfile ...

unzip prints information about or extracts files from ZIP format archives. The zipfile is a ZIP archive whose filename ends in .zip. The .zip can be omitted from the command line; unzip supplies it. zipfile may also be a shell-style wildcard pattern (which should be quoted); all matching files in the ZIP archive will be acted upon. The behavior of options is affected by the various modifiers.

In the second form, the options are taken to be zipinfo options, and unzip performs like that command. See zipinfo for more information.

Options may also be included in the UNZIP environment variable, to set a default behavior. Options on the command line can override settings in $UNZIP by preceding them with an extra minus.

When extracting files, if a file exists already, unzip prompts for an action. You may to choose to overwrite or skip the existing file, overwrite or skip all files, or rename the current file.

Notes

unzip and its companion program zip are part of the InfoZIP project. InfoZIP is an open collaborative compressed archive format, and implementations exist for Unix, Amiga, Atari, VMS and OpenVMS, MS-DOS, Macintosh, Minix, OS/2, Windows NT, and many others. It is the only similar format you can expect to port to all of these systems without difficulty. The web home page is http://www.info-zip.org/.

Unlike most Unix tar implementations, zip removes leading slashes when it creates a ZIP archive, so there is never any problem unbundling it at another site.

The Java Archive format (.jar) is based on ZIP; zip and unzip can process .jar files with no trouble.

The jar tool may be easier to use for working with .zip files, especially since its options are similar to those of tar.

The following lists intentionally omit obsolete options and those that are specific to non-Unix platforms.

Extraction Options

-d dir

Extract files in dir instead of in the current directory. This option need not appear at the end of the command line.

-x files

Exclude. Do not extract archive members that match files.

Options

-A

Print help for the shared library programming interface (API).

-c

Print files to standard output (the CRT). Similar to -p, but a header line is printed for each file, it allows -a, and automatically does ASCII to EBCDIC conversion. Not in the unzip usage message.

-f

Freshen existing files. Only files in the archive that are newer than existing disk files are extracted. unzip queries before overwriting, unless -o is used.

-l

List archived files, in short format (name, full size, modification time, and totals).

-p

Extract files to standard output (for piping). Only the file data is printed. No conversions are done.

-q[q]

Be quiet; suppress most of the informative messages provided during processing. Use -qq to suppress all messages.

-t

Test the archived files. Each file is extracted in memory, and the extracted file's CRC is compared to the stored CRC.

-T

Set the timestamp on the archive itself to be that of the newest file in the archive.

-u

Same as -f, but also extract any files that don't exist on disk yet.

-v

Be verbose or print diagnostic information. -v is both an option and a modifier, depending upon the other options. By itself, it prints the unzip ftp site information, information about how it was compiled, and what environment variable settings are in effect. With a zipfile, it adds compression information to that provided by -l.

-X

Restore the owner and group (UID and GID) recorded in the archive. The default is to use the UID and GID of the extracting user.

-z

Only print the archive comment.

-Z

Run as zipinfo. Remaining options are zipinfo options. See zipinfo for more information.

Modifiers

-:

Allow writing of files outside the directory in which extraction is taking place, via ../ in pathname components. Older versions of unzip allowed this by default; current versions disallow it for safety. This option reenables the original behavior. GNU/Linux and Mac OS X only.

-a[a]

Convert text files. Normally, files are extracted as binary files. This option causes text files to be converted to the native format (e.g., adding or removing CR characters in front of LF characters). EBCDIC-to-ASCII conversion is also done as needed. Use -aa to force all files to be extracted as text.

-b

Treat all files as binary.

-B

Save a backup copy of each overwritten file in file ~. Only available if compiled with UNIXBACKUP defined.

-C

Ignore case when matching filenames. Useful on non-Unix systems where filesystems are not case-sensitive.

-j

"Junk" paths. Extract all files in the current extraction directory, instead of reproducing the directory tree structure stored in the archive.

-L

Convert filenames to lowercase from archives created on uppercase-only systems. By default, filenames are extracted exactly as stored in the archive.

-M

Pipe output through the internal pager, which is similar to more. Press the ENTER key or spacebar at the --More-- prompt to see the next screenful.

-n

Never overwrite existing files. If a file already exists, don't extract it, just continue on without prompting. Normally, unzip prompts for an action.

-o

Overwrite existing files without prompting. Often used together with -f. Use with care.

Examples

List the contents of a ZIP archive:

    unzip -lv whizprog.zip

Extract C source files in the main directory, but not in subdirectories:

    unzip whizprog.zip '*.[ch]' -x '*/*'

Name

uptime

Synopsis

    uptime

Print the current time, amount of time the system has been up, number of users logged in, and the system-load averages. This output is also produced by the first line of the w command. GNU/Linux accepts -V to print the program's version information.

Name

users

Synopsis

    users [file]

Display the currently logged-in users as a space-separated list. Information is read from a system file such as /var/adm/utmp, although the location may vary from system to system. On Solaris, this program is in /usr/ucb.

Name

uudecode

Synopsis

    uudecode [options] [file]

Read a uuencoded file and re-create the original file with the same mode and name.

Common Option

-o file

Write output to file instead of to the filename recorded in the input. On GNU/Linux, use -o /dev/stdout to use uudecode in a pipeline.

Solaris and Mac OS X Option

-p

Write the decoded file to standard output, making it possible to use uudecode in a pipeline.

Mac OS X Options

-c

Continue; attempt to decode more than one output file from the same input.

-i

Do not overwrite files.

-s

Do not strip the final pathname to just the basename. Normally, uudecode removes leading directory components from the output filename for security.

Name

vi

Synopsis

    vi [options] [files]

A screen-oriented text editor based on ex. See Chapter 9 for more information on vi and ex.

Name

view

Synopsis

    view [options] [files]

Same as vi -R. See Chapter 9.

Name

vim

Synopsis

    vim [options] [files ...]

An enhanced version of the vi screen editor. Both vi and vim are covered in Chapter 9.

Name

vimdiff

Synopsis

    vimdiff [options] file1 file2 [file3]
    gvimdiff [options] file1 file2 [file3]

Edit two or three files with vim, highlighting the differences. If invoked as gvimdiff, the GUI is used instead. This sets the diff, wrap, and scrollbind options. It also sets foldmethod=diff and foldcolumn=2, which puts ranges of lines that aren't changed into a fold and makes folds easy to spot.

By default, the screen is split vertically, as if with -O. Use -o to get a horizontal split.

For more information about vim, see Chapter 9.

Name

w

Synopsis

    w [options] [user]

Print summaries of system usage, currently logged-in users, and what they are doing. w is essentially a combination of uptime, who, and ps -a. Display output for one user by specifying user.

Common Option

-h

Suppress headings and uptime information.

Solaris and GNU/Linux Option

-s

Display in short format.

Solaris Options

-l

Display in long format (the default).

-u

Print just the heading line. Equivalent to uptime.

-w

Same as -l.

GNU/Linux Options

-f

Toggle printing the from (remote hostname) field.

-u

Ignore the username while figuring out the current process and CPU times.

-V

Display version information.

Mac OS X Options

-d

Dump the entire process list per controlling tty, not just the top level process.

-i

Sort the output by idle time.

-M corefile

Use corefile for the name list of the running system instead of /dev/kmem.

-n

Don't resolve network addresses to turn them back into hostnames.

-N system_image

Use system_image for the name list instead of /mach.

Name

wait

Synopsis

    wait [n]

Wait for all background processes to complete and report their termination status. Used in shell scripts. If n is specified, wait only for the process with process ID n. wait is a built-in command in the Bash, Korn, and C shells. See Chapters 4 and 5 for more information.

Name

wc

Synopsis

    wc [options] [files]

Word count. Print a character, word, and line count for files. If multiple files, print totals as well. If no files are given, read standard input. See other examples under ls and sort.

Common Options

-c, --bytes

Print byte count only.

-l, --lines

Print line count only.

-m, --chars

Print character count only. This will be different than -c in a multibyte character environment.

-w, --words

Print word count only.

Solaris Option

-C

Same as -m.

GNU/Linux Option

-L, --max-line-length

Print length of longest line.

Examples

Count the number of users logged in:

    who | wc -l

Count the words in three essay files:

    wc -w essay.[123]

Count lines in file named by $file (don't display filename):

    wc -l < $file

Name

whatis

Synopsis

    whatis commands

Look up one or more commands in the online manpages, and display a brief description. Same as man -f. The MANPATH environment variable can affect the results obtained with this command. See also apropos.

Name

which

Synopsis

    which [options] [commands]

List which files are executed if the named commands are run as a command. which reads the user's .cshrc file (using the source built-in command), checking aliases and searching the path variable. Users of the Bourne or Korn shells can use the built-in type command as an alternative. (See type, Chapters 4 and 5.)

GNU/Linux Options

-a, --all

Print all matches, not just the first.

-i, --read-alias

Read aliases from standard input and write matches to standard output. Useful for using an alias for which.

--read-functions

Read shell functions from standard input and report matches to standard output. Useful for also using a shell function for which itself.

--show-dot

If a matching command is found in a directory that starts with a dot, print ./cmdname instead of the full pathname.

--show-tilde

Print a tilde (~) to indicate the user's home directory. Ignored if the user is root.

--skip-alias

Ignore --read-alias if present. Useful for finding normal binaries while using --read-alias in an alias for which.

--skip-dot

Skip directories that start with a dot.

--skip-functions

Ignore --read-functions if present. Useful when searching for normal binaries while using --read-functions in an alias or function for which.

--skip-tilde

Skip directories that start with a tilde (~) and executables in $HOME.

--tty-only

Stop processing options on the right if not on a terminal.

-v, -V, --version

Print version information and then exit.

Example

$ which file ls
    /usr/bin/file
    ls:      aliased to ls -sFC

Name

who

Synopsis

    who [options] [file]

Display information about the current status of the system. With no options, list the names of users currently logged in to the system. An optional system file (the default varies per system) can be supplied to give additional information. who is usually invoked without options, but useful options include am i and -u. For more examples, see cut, line, paste, tee, and wc.

Common Options

-H, --heading

Print headings.

-m

Report only about the current terminal.

-q, --count

"Quick." Display only the usernames.

-s, --short

List the name, line, and time fields (the default behavior).

-T, --mesg, --message, --writable

Report whether terminals are writable (+), not writable (-), or unknown (?).

-u, --users

Report terminal usage (idle time). A dot (.) means less than one minute idle; old means more than 24 hours idle.

am i

Print the username of the invoking user. (Similar to results from id.)

Solaris and GNU/Linux Options

-a, --all

Use the -b, -d, -l, -p, -r, -t, -T, and -u options.

-b, --boot

Report information about the last reboot.

-d, --dead

Report expired processes.

-l, --login

Report inactive terminal lines.

-p, --process

Report previously spawned processes.

-r, --runlevel

Report the run level.

-t, --time

Report the last change of the system clock (via date).

Solaris Option

-n x

Display x users per line (works only with -q).

GNU/Linux Options

-i, --idle

Present idle time as HOURS:MINUTES, . (dot), or old. (Deprecated; use -u.)

--lookup

Use DNS to canonicalize hostnames for people logged in remotely.

-w

Same as -T.

Example

This sample output was produced at 8 a.m. on April 17:

    $ who -uH
    NAME    LINE   TIME         IDLE   PID  COMMENTS
    martha  ttyp3  Apr 16 08:14 16:25  2240
    george  ttyp0  Apr 17 07:33   .  15182

Since martha has been idle since yesterday afternoon (16 hours), it appears that Martha isn't at work yet. She simply left herself logged in. George's terminal is currently in use. (He likes to beat the traffic.)

Name

whoami

Synopsis

    whoami

Print the username based on effective user ID. On Solaris, this command is in /usr/ucb. On GNU/Linux and Mac OS X, it's equivalent to id -un.

Name

xargs

Synopsis

    xargs [options] [command]

Execute command (with any initial arguments), but read remaining arguments from standard input instead of specifying them directly. xargs passes these arguments in several bundles to command, allowing command to process more arguments than it could normally handle at once. The arguments are typically a long list of filenames (generated by ls or find, for example) that get passed to xargs via a pipe.

Without a command, xargs behaves similarly to echo, simply bundling the input lines into output lines and printing them to standard output.

Common Options

-E string

Stop passing arguments when argument string is encountered.

-I string

Pass arguments to command, replacing instances of string on the command line with the current line of input.

-L n

Execute command for n lines of arguments.

-ncount, --max-args=count

Execute command with up to count arguments.

-p, --interactive

Prompt for a y to confirm each execution of command. Implies -t.

-smax, --max-chars=max

Each argument list can contain up to max characters. (Older systems limited n to 470. The default is system-dependent.)

-t, --verbose

Echo each command before executing.

-x, --exit

Exit if argument list exceeds n characters (from -s); -x takes effect automatically with -i and -l.

Solaris and GNU/Linux Options

-e[string], --eof[=string]

Use string as the default logical EOF string (default is underscore). An omitted string disables the logical EOF capability.

-i[string], --replace[=string]

Like -I but default string is { }.

-l[n], --max-lines[=n]

Same as -L, but default n is 1.

GNU/Linux and Mac OS X Option

-0, --null

Filenames are separated with zero bytes (ASCII NUL) instead of spaces and newlines. For use with find -print0.

GNU/Linux Options

-Pmax, --max-procs=max

Allow no more than max processes to run at once. The default is 1. A maximum of 0 allows as many as possible to run at once.

-r, --no-run-if-empty

Do not run command if standard input contains only blanks.

Mac OS X Options

-J string

When string is found among the arguments on the command line, replace its first occurrence with the current input list. This happens instead of appending the list to the given arguments.

-R count

Use count as the maximum number of arguments in which -I will do replacements.

Examples

grep for pattern in all files on the system:

    find / -print | xargs grep pattern > out &

Run diff on file pairs (e.g., f1.a and f1.b, f2.a and f2.b ...):

    echo "$@" | xargs -n2 diff

The previous line could be invoked as a shell script, specifying filenames as arguments.

Display file, one word per line:

    cat file | xargs -n1

Move files in olddir to newdir, showing each command:

    ls olddir | xargs -i -t mv olddir/{  } newdir/{  }

Name

xgettext

Synopsis

    xgettext [options] files
    xgettext -h

Solaris and GNU/Linux only. Extract messages (specially marked strings) from C and C++ source files. Place them in a "portable object" file (.po) for translation and compilation by msgfmt. By default, xgettext extracts strings only inside calls to the gettext (3C) and dgettext (3C) functions. Source files are named on the command line. A filename of - indicates the standard input. See also gettext and msgfmt.

GNU gettext extends the original Solaris gettext design and is able to extract strings from source files for a large number of languages. The URL for it is http://www.info-zip.org/.

Common Options

-a, --extract-all

Extract all strings, not just those in calls to gettext or dgettext. (GNU/Linux: applies to languages C, C++, ObjectiveC, Shell, Python, Lisp, EmacsLisp, librep, Scheme, Java, C#, awk, Tcl, Perl, PHP, GCC-source, and Glade.)

-ctag, --add-comments[=tag]

Copy source file comments marked with tag into the .po file as #-delimited comments.

-ddomain, --default-domain=domain

Use domain .po as the output file instead of messages.po.

-h, --help

Print a help message on the standard output.

-j, --join-existing

Join (merge) extracted messages with those in the current .po file. Domain directives in the existing .po file are ignored.

-mprefix, --msgstrr-prefix=prefix

Fill in each msgstr with prefix. Intended for debugging. The GNU version allows prefix to be optional.

-Msuffix, --msgstr-suffix=suffix

Fill in each msgstr with suffix. Intended for debugging. The GNU version allows suffix to be optional.

-n, --add-location

Add comments to the .po file indicating the source filename and line number where each string is used.

-ppath, --output-dir=path

Place output files in the directory path.

-s, --sort-output

Sort the output by msgid (original string), with all duplicates removed.

-xexfile, --exclude-file=exfile

exfile is a .po file with msgids that are not to be extracted (i.e., to be excluded).

GNU/Linux Options

--copyright-holder= string

Set the copyright holder in the output file.

-C, --c++

Short for --language=C++.

--debug

Produce more detailed output, intended for debugging xgettext.

-Ddir, --directory=dir

Add dir to the list of directories searched for input.

-e, --no-escape

Do not use C escapes in the output (the default).

-E, --escape

Do use C escapes in the output.

-ffile, --files-from=exfile

Read list of input files from file.

--force-po

Write the .po file even if it will be empty.

--foreign-user

Do not place the FSF copyright information into the file.

--flag= funcname : argnum : flag

Apply flag to the argnum th argument to function funcname. This is a specialized option, see the online Info manual for details. For languages: C, C++, ObjectiveC, Shell, Python, Lisp, EmacsLisp, librep, Scheme, Smalltalk, Java, C#, awk, YCP, Tcl, Perl, PHP, and GCC-source.

--from-code= encoding

Input files use encoding. Not valid for languages Python, Tcl, or Glade.

-F, --sort-by-file

Sort the output by input file location.

-i, --indent

Use an indented style when writing the .po file.

-k[word], --keyword[=word]

Additional keyword to search for. Without word, do not recognize the default keywords. Valid for languages C, C++, ObjectiveC, Shell, Python, Lisp, EmacsLisp, librep, Scheme, Java, C#, awk, Tcl, Perl, PHP, GCC-source, and Glade.

-Llang, --language=name

Source files are in language lang. Known languages are C, C++, ObjectiveC, PO, Shell, Python, Lisp, EmacsLisp, librep, Scheme, Smalltalk, Java, JavaProperties, C#, awk, YCP, Tcl, Perl, PHP, GCC-source, NXStringTable, RST, and Glade.

--msgid-bugs-address= user @ domain

Supply the bug-reporting address for problems with the original msgid strings.

--no-location

Do not write #: filename : line lines.

--no-wrap

Do not break long lines.

-ofile, --output=exfile

Write the output to file. Use - for standard output.

--omit-header

Do not write a header with a msgid "" entry.

--properties-input

Create a .properties file.

--qt

Extract Qt format strings. Valid only for C++.

--strict

Use the Uniforum format for the .po file. Avoid this if possible, it doesn't allow for GNU extensions.

--stringtable-input

Create a NeXTstep/GNUstep .strings file.

-T, --trigraphs

Interpret ANSI C trigraphs. Only for C, C++, and ObjectiveC.

-v, --version

Print version information and exit.

-wcount, --width=count

Set the output line width to count.

Name

yacc

Synopsis

    yacc [options] file
    byacc [options]filename

Given a file containing a context-free LALR(1) grammar, convert it to tables for subsequent parsing and send output to y.tab.c. This command name stands for yet another compiler-compiler. On Solaris yacc is found in /usr/ccs/bin. See also lex, flex, and bison, and lex & yacc, which is listed in the Bibliography.

Mac OS X uses Berkeley Yacc for yacc, which accepts the traditional options as well as -o. GNU/Linux provides Berkeley Yacc under the name byacc.

Common Options

-d

Generate y.tab.h, producing #define statements that relate yacc's token codes to the token names declared by the user.

-l

Exclude #line constructs from code produced in y.tab.c. (Use after debugging is complete.)

-t

Compile runtime debugging code by default.

-v

Generate y.output, a file containing diagnostics and notes about the parsing tables.

-V

Print the version of yacc on standard error. (May not be in all versions.)

GNU/Linux and Mac OS X Option

-r

Produce separate files for code and tables named y.code.c and y.tab.c, respectively.

Solaris Options

-b prefix

Use prefix instead of y for the generated filenames.

-p prefix

Use prefix instead of yy for all external names in the generated parser.

-P parser

Use parser instead of /usr/ccs/bin/yaccpar.

-Q c

Place version information about yacc in y.tab.c (if c = y) or suppress information (if c = n, the default).

Berkeley Yacc Option

-o filename

Write the generated parser to filename instead of to y.tab.c.

Name

zcat

Synopsis

    zcat [files]

Uncompress one or more compressed files to the standard output, leaving files unchanged. See bzip2 and gzip.

On Solaris, zcat is the original version related to compress. GNU/Linux and Mac OS X use the version related to gzip, which can decompress .Z and .gz files.

Name

zip

Synopsis

    zip [options] zipfile [files]

Archive files in InfoZIP format . These files can be retrieved using unzip. The files are compressed as they are added to the archive. Compression ratios of 2:1 to 3:1 are common for text files. zip may also replace files in an existing archive. With no arguments, display the help information. See also zipinfo and unzip.

Default options may be placed in the ZIPOPT environment variable, with the exceptions of -i and -x. Multiple options may be included in ZIPOPT.

The zip source code is readily available from http://www.info-zip.org/. There are a number of important notes in the unzip entry. Go there for more information.

The following list intentionally omits obsolete options and those that are specific to non-Unix platforms.

Options

-b path

Use path as the location to store the temporary ZIP archive while updating an existing one. When done, copy the temporary archive over the new one. Useful primarily when there's not enough disk space on the filesystem containing the original archive.

-c

Add one-line comments for each file. zip first performs any file operations and then prompts you for a comment describing each file.

-d

Delete entries from a ZIP archive. Filenames to be deleted must be entered in uppercase if the archive was created by PKZIP on an MS-DOS system.

-D

Don't create entries in the archive for directories. Usually entries are created, so that attributes for directories may be restored upon extraction.

-e

Encrypt the archive. zip prompts on the terminal for a password and prompts twice, to avoid typing errors. If standard error is not a terminal, zip exits with an error.

-f

Freshen (replace) an existing entry in the ZIP archive if the file has a more recent modification time than the one in the archive. This doesn't add files that are not already in the archive: use -u for that. Run this command from the same directory where the ZIP archive was created, since the archive stores relative pathnames.

-F, -FF

Fix the ZIP archive. This option should be used with care; make a backup copy of the archive first. The -FF version does not trust the compressed sizes in the archive, and instead scans it for special "signatures" that identify the boundaries of different archive members. See the manpage for more information.

-g

Grow the archive (append files to it).

-h

Display the zip help information.

-i files

Include only the specified files, typically specified as a quoted shell wildcard-style pattern.

-j

"Junk" the path; i.e., store just the name of the saved file, not any directory names. The default is to store complete paths, although paths are always relative.

-J

Strip any prepended data (e.g., an SFX stub, for self-extracting executables) from the archive.

-k

Create an archive that (attempts to) conform to the conventions used under MS-DOS. This makes it easier for PKUNZIP to extract the archive.

-l

For text files only, translate the Unix newline into a CR-LF pair. Primarily for archives extracted under MS-DOS.

-ll

For text files only, translate CR-LF into a Unix newline.

-L

Display the zip license.

-m

"Move" the files into the ZIP archive. This actually deletes the original files and/or directories after the archive has been created successfully. This is somewhat dangerous; use -T in conjunction with this option.

-n suffixlist

Do not compress files with suffixes in colon-separated suffixlist. Useful for sound or image files that often have their own, specialized compression method.

-o

Set the modified time of the ZIP archive to be that of the youngest file (most recently modified) in the archive.

-q

Quiet mode. Don't print informational messages and comment prompts. Most useful in shell scripts.

-r

Recursively archive all files and subdirectories of the named files. The -i option is also useful in combination with this one.

-t mmddyy

Ignore files modified prior to the date given by mmddyy.

-T

Test the new ZIP archive's integrity. If the test fails, an existing ZIP archive is not changed, and with -m, no files are removed.

-u

Update existing entries in the ZIP archive if the named files have modification dates that are newer than those in the archive. Similar to -f, except that this option adds files to the archive if they aren't already there.

-v

As the only argument, print help and version information, a pointer to the home and distribution Internet sites, and information about how zip was compiled. When used with other options, cause those options to print progress information and provide other diagnostic information.

-x files

Exclude the specified files, typically specified as a quoted shell wildcard-style pattern.

-X

Do not save extra file attributes (extended attributes on OS/2, user ID/group ID, and file times on Unix).

-y

Preserve symbolic links in the ZIP archive, instead of archiving the file the link points to.

-z

Prompt for a (possibly multiline) comment describing the entire ZIP archive. End the comment with a line containing just a period, or EOF.

- n

Specify compression speed: n is a digit between 0 and 9. 0 indicates no compression, 1 indicates fast but minimal compression, 9 indicates slowest but maximal compression. Default is -6.

-@

Read standard input for names of files to be archived. Filenames containing spaces must be quoted using single quotes.

Examples

Archive the current directory into source.zip, including only C source files:

    zip source -i '*.[ch]'

Archive the current directory into source.zip, excluding the object files:

    zip source -x '*.o'

Archive files in the current directory into source.zip, but don't compress .tiff and .snd files:

    zip source -n '.tiff:.snd' *

Recursively archive the entire directory tree into one archive:

    zip -r /tmp/dist.zip .

Name

zipinfo

Synopsis

    zipinfo [options] zipfile ... [exclusion option]

zipinfo prints information about ZIP format archives. The zipfile is a ZIP archive whose filename ends in .zip. The .zip can be omitted from the command line; zipinfo supplies it. zipfile may also be a shell-style wildcard pattern (which should be quoted to protect it from the shell); all matching files in the ZIP archive will be acted upon. See also zip and unzip.

Exclusion Option

-x files

Exclude. Do not extract archive members that match files.

Options

-1

Only list filenames, one per line. Nothing else is printed. For use in shell scripts.

-2

Like -1, but also permit headers, trailers, and ZIP archive comments (-h, -t, -z).

-h

Print a header line with the archive name, size in bytes, and total number of files.

-l

Use "long" format. Like -m, but also print the compressed size in bytes, instead of the compression ratio.

-m

Use "medium" format. Like -s, but also include the compression factor (as a percentage).

-M

Pipe output through the internal pager, which is similar to more. Press the ENTER key or spacebar at the --More-- prompt to see the next screenful.

-s

Use "short" format, similar to ls -l. This is the default.

-t

Print totals for all files (number of files, compressed and uncompressed sizes, overall compression factor).

-T

Print times and dates in a decimal format (yymmdd . hhmmss) that can be sorted.

-v

Use verbose, multipage format.

-z

Print the archive comment.

Alphabetical Summary of Solaris Commands

Name

cde

Common Desktop Environment

The Common Desktop Environment (CDE) is one of the graphical user interfaces (GUI) on Solaris systems. Solaris users may choose between CDE and GNOME.

Documenting CDE would require its own book and is beyond the scope of this one. Instead, listed here are some of the more useful individual CDE commands, which are kept in /usr/dt/bin. (Commands for the Desktop.) In addition, a number of OpenWindows commands are still useful. See the listing under openwin.

Useful CDE Programs

The following CDE and Sun Desktop commands may be of interest. Check the manpages for more information.

answerbook2

Sun hypertext documentation viewer.

dtaction

Invoke CDE actions from within shell scripts.

dtbuilder

CDE applications builder.

dtcalc

Onscreen scientific, logical, and financial calculator.

dtcm

Calendar manager.

dterror.ds

dtksh script for error notices and dialogues.

dtfile_error

dtksh script for error dialogues.

dticon

Icon editor.

dtksh

The "Desktop Korn shell," an early version of ksh93.

dtmail

Mail reader.

dtpad

Simple text editor.

dtprintinfo

Print job manager.

dtscreen

Screen savers.

dtterm

Terminal emulator.

fdl

Font downloader utility for PostScript printers.

sdtconvtool

GUI for iconv.

sdtfind

File finder.

sdtimage

Image viewer (PostScript, GIF, JPEG, etc.).

sdtperfmeter

System performance meter.

sdtprocess

Process manager.

Name

cdrw

Synopsis

    cdrw [options] commands |files

Read and write CDs and DVDs. cdrw can write CD-RW, DVD-RW, and DVD+RW media for data, and read and write audio data for music CDs. Options let you specify devices and control the way in which data are written to writable media. Images for data CDs and DVDs are usually prepared using mkisofs.

Without -C, the default capacities for writable CD media are assumed to be 74 minutes for an audio CD, 681,984,000 bytes for a data CD, and 4.7 Gbytes for a DVD.

Options

-a

Create an audio CD. Audio CDs are limited to 99 tracks, so no more than 99 files may be provided. Audio files should be in one of the following formats:

AUR

.aur files with raw audio data in big-endian format

CDA

.cda files with raw audio data (16 bit PCM stereo at 44.1 KHz sample rate, in little-endian format)

RIFF

.wav files with data in Red Book CDDA format

Sun

.au files with data in Red Book CDDA format

-b blanktype

Blank (erase) CD-RW and DVD-RW media. The blanktype should be one of all, fast, or session. DVD+RW media does not support blanking but can be rewritten without it.

-c

Copy a CD. By default cdrw uses the CD writer as the CD reader, and stores the data temporarily on the local hard disk. Use -s to specify a different source device.

-C

Use the amount of space reported by the drive as the capacity of the media. Useful when appending to a multisession CD.

-d device

Use device as the CD or DVD writer.

-h

Print a usage message.

-i file

Use file as the image to write to the media. For best results, the file should be available on a local hard disk, not mounted via NFS.

-l

List all CD or DVD writers available on the system.

-L

Close the disk. This prevents any further writing. Applies only to CD-RW media.

-m dir

Use dir for storing temporary files while copying a CD or DVD, instead of the default temporary directory.

-M

Report the media status: blank or not, table of contents, last session start address, and next writable address if the disk is open.

-O

Keep the disk open. The session is closed but the disk is left open for addition of another session later, creating a multisession disk.

-p speed

Set the writing speed of the drive. Usually cdrw uses the drive's default speed. With this option, cdrw attempts to change the speed, but there is no guarantee as to the actual speed used.

-s device

Use device as the source for data when copying a CD or DVD.

-S

Simulate writing. The drive's laser is turned off; use this option to verify that the system can move data quickly enough.

-T type

Specify the type of audio data. It should be one of aur, cda, wav, or sun. (See the -a option.)

-v

Be verbose.

-x

Extract audio data from an audio track.

Examples

Extract the second song from an audio CD:

    cdrw -x 2 three_blind_mice.cda

Create a data CD, at speed 40X:

    cdrw -i -p 40 /bigdisk/tmp/whizprog-dist.iso

Name

chkey

Synopsis

    chkey [options]

Prompt for login password and use it to encrypt a new key. See also keylogin and keylogout.

Options

-m mechanism

Change or reencrypt the secret key for the specified mechanism. (Mechanisms are those allowed by nisauthconf (1).)

-p

Reencrypt the existing secret key with the user's login password.

-s database

Update the given database, which is one of files, ldap, nis, or nisplus.

Name

decrypt

Synopsis

    decrypt [options] [-i infile] [-o outfile]

Decrypt files encrypted with encrypt. encrypt and decrypt are hard links to each other and accept the same options. See encrypt for a full description.

Name

digest

Synopsis

    digest [-v] -a algorithm [file ...]
    digest -l

Compute a PKCS#11 message digest of the given files. The second form lists the available digest algorithms. See also decrypt, encrypt, and mac.

Options

-a algorithm

Use algorithm to compute the digest. This option is required. Values for algorithm are sha1 and md5.

-l

Used by itself to list available digest computation algorithms.

-v

Verbose; include algorithm name in the output.

Examples

Calculate MD5 checksums on some start-up files:

    $ digest -a md5 .profile .login
                     Regular results
    (.profile) = 74c0f9c28d37f985c3f160efe992e078
    (.login) = 05d1f072534b75188bdaba2747d8edaa

    $ digest -v -a md5 .profile .login
                     Verbose
    md5 (.profile) = 74c0f9c28d37f985c3f160efe992e078
    md5 (.login) = 05d1f072534b75188bdaba2747d8edaa

Name

dircmp

Synopsis

    dircmp [options]dir1 dir2

Compare the contents of dir1 and dir2. See also diff and cmp.

Options

-d

Execute diff on files that differ.

-s

Don't report files that are identical.

-w n

Change the output line length to n (default is 72).

Name

dis

Synopsis

    dis [options]files

Disassemble the object or archive files. See also as.

Options

-C

Display demangled C++ symbol names.

-d section

Disassemble only the specified section of data, printing its offset.

-D section

Same as -d, but print the data's actual address.

-F func

Disassemble only the specified function; reuse -F for additional functions.

-l string

Disassemble only the library file string (e.g., string would be malloc for libmalloc.a).

-L

Look for C source labels in files containing debug information (e.g., files compiled with cc -g).

-o

Print octal output (default is hexadecimal).

-t section

Same as -d, but print text output.

-V

Print version information on standard error.

Name

encrypt

Synopsis

    encrypt [options] [-i infile] [-o outfile]

Encrypt files using a PKCS#11 algorithm. Files are decrypted with decrypt. encrypt and decrypt are hard links to each other and accept the same options. Both programs read and write standard input and standard output by default. See also decrypt, digest, and mac.

Tip

These programs are not related to the original Unix crypt command. That program's encryption algorithm is considered weak by today's standards, and it should not be used.

Options

-a algorithm

Use algorithm to encrypt the file. Possible values for algorithm are aes, arcfour, des, and 3des.

-i file

Read input data from file, instead of from standard input.

-k keyfile

Read the encryption/decryption key from keyfile, instead of prompting for it.

-l

List available encryption algorithms. This option should be used by itself.

-o file

Write output data to file, instead of to standard output.

-v

Be verbose. This prints a progress bar.

Examples

Display available algorithms:

    $ encrypt -l
    Algorithm       Keysize:  Min   Max (bits)
    ------------------------------------------
    aes                       128   128
    arcfour                     8   128
    des                        64    64
    3des                      192   192

Encrypt a trade secret document, then decrypt it and compare the result to the original:

    $ encrypt -a aes -i designdoc.txt -o designdoc.txt.aes
                     Encrypt
    Enter key:                                     Key is not echoed
    $ file design*
                     Check results
    designdoc.txt:     ASCII text
    designdoc.txt.aes: data
    $ decrypt -a aes -i designdoc.txt.aes -o designdoc.txt.out
                     Decrypt
    Enter key:                                     Enter same key
    $ cmp designdoc.txt designdoc.txt.out
                     Results are identical
    $

Name

enhance

Synopsis

    enhance command [argument ...]

Provide command-line editing facilities for programs that don't have it, such as ftp. enhance runs the given command and arguments behind a pseudo-terminal, reading user input, performing editing, and sending final input lines to command. enhance uses the tecla library; see tecla(5) for the details.

Name

filesync

Synopsis

    filesync [options] [-r dir ...]
    filesync [options] -s srcdir -d dstdir filename ...

Synchronize files and directories (including symbolic links and device files) between two different computer systems. This command is intended for keeping nomadic computers, such as laptops or notebook systems, synchronized with server systems. By default, changes are propagated two ways: from both the source system to the destination system, and vice versa. (Typically the server is the source system and the nomadic system is the destination.) Access to the server file tree is via NFS mount on the client, typically managed via the automounter. (Contrast this to the rsync command [see rsync in the earlier section "Alphabetical Summary of Common Commands"], where the name of the remote host is provided explicitly.)

filesync synchronizes only the files listed in the $HOME/.packingrules file. See packingrules(4) for a description of the file format. The file allows specification of files to be ignored, wildcard patterns, and more. It lists the files and directories that are to be synchronized. Users may edit this file with any text editor in order to adjust filesync's operation. The file $HOME/.filesync-base keeps track of which files are subject to synchronization, and their states when last synchronized. Users should not edit this file. Both files should be kept on the nomadic system, which should also be the one where filesync is run, in order to avoid problems with multiple nomadic systems synchronizing from a single server.

The first command-line syntax synchronizes files as described by the .filesync-base and .packingrules files. The -r option may be used to restrict synchronization to just the given directory. The second syntax adds new directories to the list of files to be synchronized. This syntax is cumulative; once added, files and directories stay in the synchronization list until explicitly removed (by editing the .packingrules file). Specifying a directory copies the directory and the entire file hierarchy under it.

By default filesync reports its actions in the form of Unix commands: mv, cp, etc.

Options

-a

Check, and if possible, reconcile Access Control Lists (ACLs) for files being synchronized.

-d dstdir

Use dstdir as the destination directory into which new files should be synchronized. Use together with -s and a filename operand.

-e

Report all differences, such as ownership and permissions. filesync normally ignores differences it cannot synchronize, such as changing ownership to the original file's owner if not run as a privileged user.

-f favorite

Favor the system specified by favorite when reconciling conflicts between the source and the destination system. Possible values for favorite are:

src

Favor the source system.

dst

Favor the destination system.

old

Favor the older version of the file.

new

Favor the newer version of the file.

You can use -f and -o together if they both specify the same preference (src or dst). If they conflict, -f is ignored.

-h

Quit (halt) upon encountering an error. Normally filesync continues after errors and attempts to synchronize as many files as possible.

-m

Make sure that both copies of the file have the same modification time.

-n

Dry run option. Do not change any files and do not update the .packingrules file.

-o origin

One-way change. Changes are propagated only from the system specified by origin, which is either src or dst, to the other system.

You can use -n and -o together on a disconnected nomadic system to see what changes have been made since the files were last synchronized.

-q

Quiet operation. Suppress the normal report of actions that are being taken.

-r dir

Synchronize only the files in directory dir. Repeat this option to synchronize multiple directories.

-s srcdir

Use srcdir as the source directory from which new files should be synchronized. Use together with -d and a filename operand.

-v

Verbose; display additional information about each file comparison.

-y

Assume a "yes" answer to any safety checks, effectively bypassing the checks. Useful if the server has changed to a different mount point and you're sure you know what you're doing when you synchronize; see the filesync(1) manpage for more information.

Name

gpatch

Synopsis

    gpatch [options] [original [patchfile]]

This is Sun's version of GNU patch. On Solaris, /usr/bin/patch is a much older version of Larry Wall's original patch program. The GNU version is more functional and is generally recommended. For backwards compatibility, the original patch is left in place, and this version is provided for those who want it. For more information, see patch in the earlier section "Alphabetical Summary of Common Commands."

Name

keylogin

Synopsis

    keylogin [-r]

Prompt user for a password, then use it to decrypt the person's secret key. This key is used by secure network services (e.g., Secure NFS, NIS+). keylogin is needed only if the user isn't prompted for a password when logging in. The -r option updates /etc/.rootkey. Only a privileged user may use this option. See also chkey and keylogout.

Name

keylogout

Synopsis

    keylogout [-f]

Revoke access to (delete) the secret key used by secure network services (e.g., Secure NFS, NIS+). See also chkey and keylogin.

Option

-f

Forget the root key. If specified on a server, NFS security is broken. Use with care.

Name

line

Synopsis

    line

Read the next line from standard input and write it to standard output. Exit status is 1 upon EOF. Typically used in csh scripts to read from the terminal.

Example

Print the first two lines of output from who :

    who | ( line ; line )

Name

listusers

Synopsis

    listusers [options]

List all users, optionally just by group, or by specific users.

Options

-g grouplist

List all users in the comma-separated list of groups grouplist.

-l users

List just the named users, sorted by login. A comma-separated list may also be provided.

Name

mac

Synopsis

    mac [-v] -a algorithm [file ...]
    mac -l

Compute a PKCS#11 message authentication code (MAC) of the given files. The second form lists the available MAC algorithms. See also decrypt, digest, and encrypt.

Options

-a algorithm

Use algorithm to compute the MAC. This option is required. Values for algorithm are des_mac, sha1_hmac, and md5_hmac.

-k keyfile

Read the encryption key from keyfile, instead of prompting for it.

-l

Used by itself to list available MAC computation algorithms.

-v

Be verbose.

Examples

Show available MAC algorithms:

    $ mac -l
    Algorithm       Keysize:  Min   Max (bits)
    ------------------------------------------
    des_mac                    64    64
    sha1_hmac                   8   512
    md5_hmac                    8   512

Generate a MAC for an encrypted version of a trade-secret document:

    $ mac -a md5_hmac designdoc.txt.aes
    Enter key:
    277f71848afe07ccbd78bee3bfdf11b8

Name

mount

Synopsis

    mount [options] mount_spec ...

System administration command. Mount a filesystem on a directory. Solaris understands several different kinds of local (hard disk) filesystem structures, as well as supporting network mounts of NFS filesystems and SMB shares. Filesystems and the directories on which to mount them are listed in /etc/vfstab, along with options for each mount. The file /etc/mnttab records which filesystems are actually mounted.

Along with general options, each filesystem may have options specific to it. When run with no options, mount prints the list of currently mounted filesystems.

The mount_spec may be either a special file (block device) or mount point listed in /etc/vfstab, in which case it's mounted. Otherwise, you must supply both the device name and the directory on which to mount it. See the Examples.

Options

-a

Mount all filesystems of the given type. With no type or mount points, attempt to mount every filesystem in /etc/vfstab with yes in the "mount at boot" field.

-F type

The filesystem is of type type. Useful types are ufs for the native Unix filesystem format, pcfs for FAT-32 filesystems, cifs for SMB shares, hsfs (High Sierra filesystem) for ISO 9660 CD-ROMs, and nfs for Sun's Network Filesystem.

-g

Mount the filesystem globally, across all clusters. No effect on nonclustered systems.

-m

Mount the filesystem without making an entry in /etc/mnttab.

-o options

Supply options for the mount. Multiple options should be comma separated. Following is a list of options supported directly by mount. Each filesystem may have additional options.

devices, nodevices

Allow (disallow) the use of device special files on this filesystem.

exec, noexec

Allow (disallow) the execution of programs on the filesystem. The default is exec.

nbmand, nonmbmand

Allow (disallow) nonblocking mandatory locking. The default is to disallow it. Enabling this option may cause surprising behavior from applications not expecting non-blocking semantics. Do not use for /, /usr, and /var. Mutually exclusive with -g.

ro, rw

Mount the filesystem read-only (read-write). The default is read-write. Use ro for read-only media such as CD-ROMs or DVD-ROMs.

setuid, nosetuid

Allow (disallow) execution of setuid and setgid executables.

suid, nosuid

The nosuid option is equivalent to nosetuid,nodevices, and is highly recommended for NFS filesystems mounted with the root= option. suid is thus equivalent to setuid,devices.

-O

Overlay mount. This allows mounting one filesystem on the pre-existing mount point of another filesystem. The pre-existing mount point's files then become inaccessable. Without -O, such a mount is an error.

-p

Print the list of mounted filesystems in the same format as /etc/vfstab. Must be used by itself.

-r

Mount the filesystem read-only.

-v

Print the list of mounted filesystems in verbose format. Must be used by itself.

-V

Verify. mount prints out what it would do, without actually attempting the mount. This may include the invocation of subsidiary, filesystem-specific mount commands.

Examples

Mounting is usually restricted to privileged users. Here, # is the prompt for the root, the superuser.

Mount a local filesystem. The type is assumed to be ufs:

    # mount /dev/dsk/c0d0s4 /opt

Mount a FAT-32 filesystem:

    # mount -F pcfs /dev/dsk/c0d1s2 /pcfs

Mount a remote NFS filesystem. The host : file format of the device indicates that the filesystem is of type NFS:

    # mount server.example.com:/bigdisk /bigdisk

Name

nawk

Synopsis

    nawk [options] ['program'] [files] [variable=value]

New version of awk, with additional capabilities. nawk is a pattern-matching language useful for manipulating data. /usr/xpg4/bin/awk should be used in preference to /usr/bin/nawk. See Chapter 11 for more information on the awk language.

Name

openwin

Synopsis

    /usr/openwin/bin/*

Programs from the OpenWindows graphical user interface environment. This environment is obsolete; the preferred environments are CDE (the Common Desktop Environment) and GNOME, and you can no longer run OpenWindows directly. However, for compatibility, many OpenWindows programs continue to be shipped with Solaris . The user level programs such as cmdtool and shelltool are no longer present, although a number of standard X11 programs are to be found in this directory. See also cde.

Useful OpenWindows Commands

The following OpenWindows commands may be of interest. Look at the manpages for more information:

oclock

A round clock

xbiff

Graphical mail arrival watchdog program

xcalc

Simple on-screen calculator

xditview

Device-independent troff output viewer

xedit

Simple text editor

xhost

Controls permissions for who can connect to display

xload

System load monitor

xlock

Screen saver/locker

xmag

Magnifies portions of the display

xman

Viewer for manpages

xterm

Standard X Window system terminal emulator

Name

page

Synopsis

    page [options] [files]

Same as more.

Name

ps

Synopsis

    ps [options]

Report on active processes. In options, list arguments should either be separated by commas or put in double quotes. In comparing the amount of output produced, note that -e > -d > -a and -l > -f. In the BSD version (/usr/ucb/ps), options work much differently; you can also display data for a single process.

Options

-a

List all processes except group leaders and processes not associated with a terminal.

-A

Same as -e.

-c

List scheduler data set by priocntl (an administrative command).

-d

List all processes except session leaders.

-e

List all processes.

-f

Produce a full listing.

-g list

List data only for specified list of group leader ID numbers (i.e., processes with same ID and group ID).

-G list

Show information for processes whose real group ID is found in list.

-j

Print the process group ID and session ID.

-l

Produce a long listing.

-L

Print information about lightweight processes.

-n file

Use the alternate file for the list of function names in the running kernel (default is /unix). Accepted for compatibility, but ignored.

-o format

Customize information according to format. Rarely used.

-p list

List data only for process IDs in list.

-P

Print the processor number on which the process or lightweight process is bound.

-s list

List data only for session leader IDs in list.

-t list

List data only for terminals in list (e.g., tty1).

-u list

List data only for usernames in list.

-U uidlist

Show information for processes whose real user ID is found in list.

-y

With -l, omit the F and ADDR columns and use kilobytes instead of pages for the RSS and SZ columns.

-z zonelist

List only processes in the zones in zonelist. Zones may be given using either the zone name or the zone ID. This option is useful only if ps is run in the global zone.

-Z

Add an additional ZONE output column showing the zone for each process.

Name

rksh

Synopsis

    rksh [options] [arguments]

Restricted version of ksh (the Korn shell), used in secure environments. rksh prevents you from changing out of the directory or from redirecting output. See Chapter 4.

Name

setpgrp

Synopsis

    setpgrp command [argument ...]

Become a session leader by setting the process group ID and the session ID to the current process ID, and then using exec(2) to run the named command and arguments.

Name

sotruss

Synopsis

    sotruss [options] program [args ...]

Shared object library version of truss. sotruss executes program, passing it args, if any. It then traces calls into and/or out of shared object libraries that are loaded dynamically. See also truss and whocalls.

Options

-f

Follow children created by fork(2) and print output for each child. Each output line contains the process's process ID.

-F fromlist

Only trace calls from the libraries named in fromlist, which is a colon-separated list of libraries. The default is to trace only calls from the main executable.

-o file

Send output to file. If used with -f, the process ID of the running program is appended to the filename.

-T tolist

Only trace calls to routines in the libraries named in tolist, which is a colon-separated list of libraries. The default is to trace all calls.

Name

timex

Synopsis

    timex [options] command [arguments]

Execute a command with optional arguments and print information similar to the time command. Report process data with various options.

Options

-o

Show total number of blocks and characters used.

-p suboptions

Show process accounting data with possible suboptions.

-s

Show total system activity.

Suboptions for -p

-f

Include fork/exec flag and system exit status.

-h

Show "hog" factor (fraction of CPU time used) instead of mean memory size.

-k

Show total kcore-minutes instead of memory size.

-m

Show mean core size (this is the default behavior).

-r

Show CPU use percentage (user time / (system time + user time)).

-t

Show user and system CPU times.

Name

truss

Synopsis

    truss [options]arguments

Trace system calls, signals, and machine faults while executing arguments. arguments is either a Unix command to run or, if -p is specified, a list of process IDs representing the already running processes to trace. The options -m, -r, -s, -t, -v, -w, and -x accept a comma-separated list of arguments. A ! reverses the sense of the list, telling truss to ignore those elements of the list during the trace. (In the C shell, use a backslash before !.) The keyword all can include/exclude all possible elements for the list. The optional ! and corresponding description are shown in brackets. truss also provides tracing of user-level function calls in dynamically loaded shared libraries. See also sotruss and whocalls.

This command is particularly useful for finding missing files when a third-party application fails. By watching the access and open system calls, you can find where, and which, files the application program expected to find, but did not.

Many systems have similar programs named trace or strace. These programs are worth learning how to use.

Options

-a

Display parameters passed by each exec(2) call.

-c

Count the traced items and print a summary rather than listing them as they happen.

-d

Print a timestamp in the output, of the form seconds.fraction, indicating the time relative to the start of the trace. Times are when the system call completes, not starts.

-D

Print a delta timestamp in the output, of the form seconds.fraction, indicating the time between events (i.e., the time not inside system calls).

-e

Display values of environment variables passed by each exec (2) call.

-E

Print a delta timestamp in the output, of the form seconds.fraction, indicating the time between the beginning and end of a system call. This is the opposite of the -D option.

-f

Follow child processes. Useful for tracing shell scripts.

-i

List sleeping system calls only once, upon completion.

-l

Show the lightweight process ID for a multithreaded process.

-m[!]faults

Trace [exclude from trace] the list of machine faults. faults are names or numbers, as listed in <sys/fault.h> (default is -mall -m!fltpage).

-M[!]faults

When the traced process receives one of the named faults, truss leaves the process in a stopped state and detaches from it (default is -M!all). The process can subsequently be attached to with a debugger, or with another invocation of truss using different options.

-o outfile

Send trace output to outfile, not standard error.

-p pidlist

Trace one or more running processes instead of a command. Use pid / lwp to trace a lightweight process (thread).

-r[!]file_descriptors

Display [don't display] the full I/O buffer of read system calls for file_descriptors (default is -r!all).

-s[!]signals

Trace [exclude from trace] the list of signals. signals are names or numbers, as listed in <sys/signal.h> (default is -sall).

-S[!]signals

When the traced process receives one of the named signals, truss leaves the process in a stopped state and detaches from it (see -M; default is -S!all).

-t[!]system_calls

Trace [exclude from trace] the list of system_calls. system_calls are names or numbers, as listed in Section 2, "System Calls," of the UNIX Programmer's Reference Manual (see intro(2)); default is -tall.

-T[!]system_calls

When the traced process executes one of the named system calls, truss leaves the process in a stopped state and detaches from it (see -M; default is -T!all).

-u[!]lib,...:[:][!]func,...

Trace user-level function calls, not just system calls. lib is a comma-separated list of dynamic library names, without the .so. n suffix. func is a comma-separated list of names. Shell wildcard syntax may be used to specify many names. (Such use should be quoted to protect it from expansion by the shell.) The leading ! indicates libraries and/or functions to exclude. With :, only calls into the library from outside it are traced; with ::, all calls are traced.

-U[!]lib,...:[:][!]func,...

When the traced process executes one of the named user-level functions, truss leaves the process in a stopped state and detaches from it (see -M).

-v[!]system_calls

Verbose mode. Same as -t, but also list the contents of any structures passed to system_calls (default is -v!all).

-w[!]file_descriptors

Display [don't display] the full I/O buffer of write system calls for file_descriptors (default is -w!all).

-x[!]system_calls

Same as -t, but display the system call arguments as raw code (hexadecimal; default is -x!all).

Examples

Trace system calls access(), open(), and close() for the lp command:

    truss -t access,open,close lp files 2> truss.out

Trace the make command, including its child processes, and store the output in make.trace :

    truss -f -o make.trace make target

Name

umount

Synopsis

    umount [options] device |mount_point

System administration command. Unmount a mounted filesystem. device is a device name or other string indicating what is mounted. A mount_point is the name of a directory on which a device or other special object is mounted. See also mount.

Options

-a

May be used with multiple arguments to cause umount to attempt to do the unmounts in parallel.

-f

Force the unmounting of the filesystem. This option can be dangerous, use with caution.

-o options

Provide filesystem-specific options in options. This is unusual when unmounting a filesystem. See mount for a list of options.

-V

Verify. umount prints out what it would do, without actually attempting the unmount. This may include the invocation of subsidiary, filesystem-specific unmount commands.

Name

vacation

Synopsis

    vacation
    vacation [options] [user]

Automatically return a mail message to the sender announcing that you are on vacation.

Use vacation with no options to initialize the vacation mechanism. The process entails several steps.

Create a .forward file in your home directory. The .forward file contains:

        \user, "|/usr/bin/vacation user"

user is your login name. The action of this file is to actually deliver the mail to user (i.e., you), and to run the incoming mail through vacation. Add any appropriate options to the vacation command line.

Create the .vacation.pag and .vacation.dir files. These files keep track of who has sent you messages, so that they only receive one "I'm on vacation" message from you per week.

Start an editor to edit the contents of .vacation.msg. The contents of this file are mailed back to whoever sends you mail. Within its body, $SUBJECT is replaced with the contents of the incoming message's Subject: line. You should include at least a Subject: header line of your own, such as:

        Subject: I am out of the office until next Wednesday

Remove or rename the .forward file to disable vacation processing.

You may also create a .vacation.filter file that specifies email addresses and/or domains to which vacation will send messages. Addresses that don't match will not receive a vacation message. Case is ignored in the .vacation.filter file, as are empty lines and lines beginning with #.

Options

The -a, -e, -f, -j, -m, -s, and -t options are used within a .forward file; see the Example.

-a alias

Mail addressed to alias is actually mail for the user and should produce an automatic reply.

-e file

Use file as the filter file, instead of .vacation.filter.

-f file

Use file as the base name for the database files (.pag and .dir) instead of .vacation.

-I

Reinitialize the .vacation.pag and .vacation.dir files. Use this right before leaving for your next vacation.

-j

Do not verify that user appears in the To: or Cc: headers.

-m file

Use file in $HOME as the text of the automatic reply, instead of ~/.vacation.msg.

-s sender

Send replies to sender instead of to the address listed in the Unix "From" line of the incoming mail.

-t interval

By default, no more than one message per week is sent to any sender. This option changes that interval. interval is a number with a trailing s, m, h, d, or w indicating seconds, minutes, hours, days, or weeks, respectively.

Example

Send no more than one reply every three weeks to any given sender:

    $ cd
    $ vacation -I
    $ cat .forward
    \jp, "|/usr/bin/vacation -t3w jp"
    $ cat .vacation.msg
    From: jp@wizard-corp.com (J. Programmer, via vacation)
    Subject: I'm out of the office ...

    Hi. I'm off on a well-deserved vacation after finishing
    up whizprog 2.0. I will read and reply to your mail
    regarding "$SUBJECT" when I return.

    Have a nice day,

    JP

Name

volcheck

Synopsis

    volcheck [options] [pathnames]

Check one or more devices named by pathnames to see if removable media has been inserted. The default is to check every device being managed by volume management. Most often used with floppies; volume management usually notices when CD-ROMs or DVD-ROMs have been inserted.

Note: use of the -i and -t options, particularly with short intervals, is not recommended for floppy-disk drives.

Options

-i nsec

Check the device(s) every nsec seconds. The default is every two seconds.

-t nsecs

Keep checking over the next nsecs seconds. Maximum nsecs is 28,800 (eight hours).

-v

Be verbose.

Name

whocalls

Synopsis

    whocalls [options] function program [arguments ...]

Run program with the given arguments. Using facilities of the dynamic loader show which functions call the named function. See also sotruss and truss.

Options

-l wholib

Use wholib instead of the standard who.so Link-Auditing library.

-s

Use the .symtab symbol table in the ELF file for local symbol tables instead of the default .dynsym symbol table. This is more expensive but can provide more detailed stack tracing information.

Example

Show use of write(2) system call:

    $ cat dontpanic.c
                     Show program code
    #include <unistd.h>

    int main(void)
    {
            (void) write(1, "Don't panic!\n", 13);
            return 0;
    }
    $ cc dontpanic.c -O -o dontpanic
                     Compile program
    $ whocalls write dontpanic
                     Run with whocalls
    write(0x1, 0x80506cc, 0xd)             Output from whocalls
            /export/u/guest/arnold/dontpanic:main+0x14
            /export/u/guest/arnold/dontpanic:_start+0x7a
    Don't panic!Output from dontpanic

Alphabetical Summary of GNU/Linux Commands

Tip

GNU/Linux programs generally accept --help and --version options. In the interest of brevity, the individual command descriptions omit listing those options.

Name

aspell

Synopsis

    aspell [options] [files]

aspell is intended to be a drop-in replacement for ispell, but with more functionality. It thus accepts the same options; see ispell for more information. See also spell in the earlier section "Alphabetical Summary of Common Commands."

URL: http://aspell.net/ and http://www.gnu.org/software/aspell/.

Name

cdda2wav

Synopsis

    cdda2wav [options] [output.wav]

Convert Compact Disc Digital Audio (CDDA) to the WAV format. This process is often called "ripping" a CD-ROM, and is generally performed before using an encoder to convert the file to a compressed music format such as OGG or MP3. By default, cdda2wav reads data from the /dev/cdrom device and outputs one WAV file per track.

Options

Some of the following options use sectors as a unit of measurement. Each sector of data on a CD represents approximately 1/75 second of play time.

-adivider, --dividerdivider

Set rate to 44,100 Hz/divider. To get a list of possible values, use the -R option.

-Adrivename, --auxdevicedrivename

Specify a different drive for ioctl purposes.

-bn, --bits-per-samplen

Set the quality of samples to n bits per sample per channel. Possible values are 8, 12, and 16.

-B, --bulk, --alltracks

Copy each track into its own file.

-cchannels, --channelschannels

Set recording channels. Use 1 for mono, 2 for stereo, or s for stereo with both channels stopped.

-Cendianess, --cdrom-endianessendianess

Set the endianess of the input samples to endianess. Possible values are little, big, or guess.

-damount, --durationamount

Set to a number followed by f for frames (sectors) or s for seconds. Set time to zero to record an entire track. For example, to copy two minutes, use 120s.

-Ddevicename, --devicedevicename, dev=devicename

Specify the device. The device must be able to work with the -I (--interface) setting.

-e, --echo

Copy audio data to a sound device rather than to a file.

-Eendianess, --output-endianessendianess

Set the endianess of the output samples to endianess. Possible values are little or big.

-F, --find-extremes

Find extreme amplitudes in samples.

-g, --gui

Format the output for parsing by GUI frontend programs.

-G, --find-mono

Determine if input samples are in mono.

-h, --help

Display version and option summary, and quit.

-H, --no-infofile

Do not write an info file or a CDDB file.

-in, --indexn

Set the start index to n when recording.

-Iifname, --interfaceifname

Specify the type of interface. For Linux systems, the most appropriate value is usually cooked_ioctl.

-J, --info-only

Do not write data to a file; instead just write information about the disc.

-Lmode, --cddbmode

Use the CDDB ID to do a cddbp album and track title lookup. The mode parameter directs handling of multiple entries. Use 0 for interactive choice, or 1 which always takes the first entry. Additional variables may be provided for CDDB server name and port number:

cddbp-port= portnum

Contact the CDDB server on port number portnum.

cddbp-server= server

Use CDDB server server.

-m, --mono

Record in mono. Use -s to record in stereo.

-Mcount, --md5count

Calculate MD5 checksum for count bytes from the beginning of a track.

-ncount, --sectors-per-requestcount

Read count sectors in each request.

-N, --no-write

Do not write data to a file, just read the tracks. For debugging.

-on, --offsetn

Start recording n sectors before the beginning of the first track.

-O, --output-format

Choose the output file format. Normal file options are wav, aiff, aifc, au, and sun. You can also use cdr and raw for headerless files dumped into recording devices.

-pn, --set-pitchn

Adjust the pitch by n percent when copying data to an audio device.

-paranoia

Use the paranoia library instead of cdda2wav's built-in routines for reading.

-Pn, --set-overlapn

Use n sectors of overlap for jitter correction.

-q, --quiet

Quiet mode; the program will not send any data to the screen.

-Q, --silent-SCSI

Do not print SCSI command errors. Mainly for use by GUI frontends.

-rn, --raten

Set the sample rate in samples per second. To get a list of possible values, use the -R option.

-R, --dump-rates

Output a list of possible sample rates and dividers. This option is typically used alone.

-s, --stereo

Record in stereo. Use -m to record in mono.

-scanbus

Scan all SCSI busses for all SCSI devices and print the inquiry strings. Use dev= device to specify devices to scan. For example, dev=ATA: for IDE CD Writers using Linux IDE to SCSI emulation.

-Sn, --speed-selectn

Specify the speed at which your system will read the CD-ROM. Set the value to the multiple of normal playback speed given as your CD-ROM drive speed (4, 16, 32, and so forth). Setting the speed lower than the maximum can prevent errors in some cases.

-ttracknumber, --tracktracknumber

Set start track and, optionally, end track. Separate the track numbers with the + character.

-T, --deemphasize

Undo pre-emphasis in the input samples.

-vlist, --verbose-levellist

Print information about the CD. list is a comma-separated list of one or more of the following options:

all

All information

catalog

The media catalog number (MCN)

disable

No information, but do print warnings

indices

Index offsets

sectors

Table of contents in start sector notation

summary

Summary of the recording parameters

titles

Table of contents with track titles (when available)

toc

Table of contents

trackid

All International Standard Recording Codes (ISRC)

-V, --verbose-SCSI

Log SCSI commands to the output. Mainly for debugging.

-w, --wait

Wait for a signal before recording anything.

-x, --max

Set recording quality (and amount of hard disk usage) to maximum.

Examples

For most systems, you should be able to copy a complete CD to a single WAV file with the following command:

    cdda2wav

To copy a complete CD to a set of WAV files, one per track:

    cdda2wav -B

Scan for IDE CD Writers:

    $ cdda2wav -scanbus dev=ATA:
    scsibus1:
        1,0,0   100) 'ASUS ' 'CRW-5224A  ' '1.20' Removable CD-ROM
        1,1,0   101) *
    ...

Name

cdparanoia

Synopsis

    cdparanoia [options] span [outfile]

Similar to cdda2wav, cdparanoia reads Compact Disc audio files as WAV, AIFF, AIFF-C, or raw format files. It uses additional data-verification and sound-improvement algorithms to make the process more reliable, and is used by a number of graphical recording programs as a backend.

Options

-a, --output-aifc

Output in AIFF-C format.

-B, --batch

Split the output into multiple files on track boundaries like cdda2wav. Filenames are prefixed with track#.

-c, --force-cdrom-little-endian

Force cdparanoia to treat the drive as a little-endian device.

-C, --force-cdrom-big-endian

Force cdparanoia to treat the drive as a big-endian device.

-ddevicename, --force-cdrom-devicedevicename

Specify a device name to use instead of the first readable CD-ROM available.

-e, --stderr-progress

Send all progress messages to standard error instead of standard output; used by wrapper scripts.

-f, --output-aiff

Output in AIFF format.

-gdevice, --force-generic-devicedevice

Use with -g to set the generic device separately from that of the CD-ROM device. Useful only on nonstandard SCSI setups.

-h, --help

Display options and syntax.

-ncount, --force-default-sectorscount

Do atomic reads of count sectors per read. Not generally useful.

-Ocount, --sample-offsetcount

Shift sample positions by the given count. This shifts track boundaries for the whole disc. May cause read errors or even lockups on buggy hardware.

-p, --output-raw

Output headerless raw data.

-q, --quiet

Quiet mode.

-Q, --query

Display CD-ROM table of contents and quit.

-r, --output-raw-little-endian

Output raw data in little-endian byte order.

-R, --output-raw-big-endian

Output raw data in big-endian byte order.

-s, --search-for-drive

Search for a drive, even if /dev/cdrom exists.

-Sn, --force-read-speedn

Set the read speed to n on drives that support it. This is useful if you have a slow drive or are low on memory.

-tn, --toc-offsetn

Shift the entire disc LBA address by n. The amount is added to the beginning offsets in the TOC. -T is similar.

-T, --toc-bias

Compensate for the behavior of some drives whereby the actual track beginning offsets are correctly reported in the TOC, but the beginning of track 1 index 1 is treated as sector 0 for reads. May cause read errors or even lockups on buggy hardware.

-v, --verbose

Verbose mode.

-V, --version

Print version information and quit.

-w, --output-wav

Output in WAV format. This is the default.

-X, --abort-on-skip

If a read fails and must be skipped, skip the entire track and delete any partially completed output file.

-Y, --disable-extra-paranoia

Use data verification and correction only at read boundaries. Not recommended.

-z[retries], --never-skip[=retries]

If a read fails (for example, due to a scratch in the disc), try again and again. If you specify a number, cdparanoia will try that number of times. If you do not, cdparanoia will retry until it succeeds.

-Z, --disable-paranoia

Disable data verification and correction. Causes cdparanoia to behave exactly as cdda2wav would.

Progress Symbols

The output during operation includes both smiley faces and more standard progress symbols. They are:

:-)

Operation proceeding normally.

:-|

Operation proceeding normally, but with jitter during reads.

:-/

Read drift.

:-P

Unreported loss of streaming in atomic read operation

8-|

Repeated read problems in the same place.

:-0

SCSI/ATAPI transport error (hardware problem not related to the disc itself).

:-(

Scratch detected.

;-(

Unable to correct problem.

8-X

Unknown and uncorrectable error.

:^D

Finished.

Blank space

Blank space in the progress indicator means that no corrections were necessary.

-

Jitter correction was required.

+

Read errors.

!

Errors even after correction; repeated read errors.

e

Corrected transport errors.

V

An uncorrected error or a skipped read.

The span Argument

The cdparanoia command takes exactly one argument, which describes how much of the CD to record. It uses numbers followed by bracketed times to designate track numbers and time within them. For example, the string 1[2:23]-2[5] indicates a recording from the 2-minute and 23-second mark of the first track up to the fifth second of the second track. The time format is demarcated by colons, hours:minutes:seconds:.sectors, with the last item, sectors, preceded by a decimal point (a sector is 1/75 of a second). It's best to put this argument within quotes.

If you use the -B option, the span argument is not required.

Name

cdrdao

Synopsis

    cdrdao command [options]toc-file

Write all content specified in description file toc-file to a CD-R disk drive in one step. This is called disk-at-once (DAO) mode , as opposed to the more commonly used track-at-once (TAO) mode . DAO mode allows you to change the length of gaps between tracks and define data to be written in these gaps (like hidden bonus tracks or track intros). The toc-file can be created by hand or generated from an existing CD using cdrdao's read-toc command. A cue file, as generated by other audio programs, can be used instead of a TOC file. The file format for TOC files is discussed at length in the cdrdao manpage.

URL: http://cdrdao.sourceforge.net/. (cdrdao doesn't come with Fedora Core 3, apparently because cdrecord can also do DAO recording.)

Commands

The first argument must be a command. Note that not all options are available for all commands.

blank

Blank a CD-RW disc.

copy

Copy the CD. If you use a single drive, you will be prompted to insert the CD-R after reading. An image file will be created unless you use the --on-the-fly flag and two CD drives.

discid

Print out CDDB information for a CD.

disk-info

Display information about the CD-R currently in the drive.

msinfo

Display multisession information. Useful mostly for wrapper scripts.

read-cd

Create a TOC file and read in the audio data on a CD.

read-cddb

Check a CDDB server for data about the CD represented by a given TOC file, then write that data to the TOC file as CD-TEXT data.

read-test

Check the validity of the audio files described in the TOC file.

read-toc

Read from a CD and create a disk image and TOC file that will allow creation of duplicates.

scanbus

Scan the system bus for devices.

show-data

Print out the data that will be written to the CD-R. Useful for checking byte order.

show-toc

Print a summary of the CD to be created.

simulate

A dry run: do everything except write the CD.

toc-info

Print a summary of the TOC file.

toc-size

Print the total number of blocks for the TOC.

unlock

Unlock the recorder after a failure. Run this command if you cannot eject the CD after using cdrdao.

write

Write the CD.

Options

--blank-mode mode

Set the blanking mode for a rewritable disc. The value for mode is either full or minimal.

--buffer-under-run-protection n

Use 0 to disable buffer underrun protection, or 1 to enable it. The default is enabled.

--buffers n

Set the number of seconds of data to be buffered. Default is 32; set to a higher number if your read source is unreliable or is slower than the CD-R.

--capacity minutes

Set the capacity in minutes for --full-burn.

--cddb-directory localpath

CDDB data that is fetched will be saved in the directory localpath.

--cddb-servers server,server

Enter hosts for servers. Servers may include ports, paths, and proxies; you can list multiple servers separated by spaces or commas.

--cddb-timeout s

Set the timeout for CDDB server connections to s seconds.

--datafile filename

When used with the read-toc command, specifies the data file placed in the TOC file. When used with read-cd and copy, specifies the name of the image file created.

--device bus,id,logicalunit

Set the SCSI address of the CD-R using the bus number, ID number, and logical unit number.

--driver driver-id : option-flags

Force cdrdao to use the driver you choose with the driver options named, instead of the driver it autodetects.

--eject

Eject the disc when done.

--fast-toc

Do not extract the pre-gaps and the index marks.

--force

Override warnings and perform the action anyway.

--full-burn

Force burning to the outer edge of the disc.

-h

Print a help summary for individual commands.

--keepimage

Used only with the copy command. Keeps the image file created during the copy process.

--multi

Record as a multisession disc.

-n

Do not wait 10 seconds before writing the disc.

--on-the-fly

Do not create an image file: pipe data directly from source to CD-R.

--overburn

If you are using a disc with more storage space than cdrdao detects, use this option to keep writing even when cdrdao thinks you're out of space.

--paranoia-mode n

Specifies n, from 0 to 3, for the amount of error correction in the CD read. 0 is none, 3 is full (see cdparanoia for information about error correction). Set error correction to a lower number to increase read speed. The default is 3.

--query-string

Just print out the CDDB query.

--read-raw mode

Set sub-channel reading mode. Possible values are rw or rw_raw.

--read-subchan

Used only with the read-cd command. Write raw data to the image file.

--reload

Allow the drive to be opened before writing without interrupting the process. Used with simulation runs.

--save

Save current options to the settings file $HOME/.cdrdao.

--session n

Used only with the read-toc and read-cd commands when working with multisession CDs. Specifies the number of the session to be processed.

--simulate

Don't actually write data.

--source-device bus,id,logicalunit

Used only with the copy command. Set the SCSI address of the source device.

--source-driver driver-id : option-flags

Used only with the copy command. Set the source device driver and flags.

--speed value

Set the write speed to value. The default is the highest available; use a lower value if higher values give poor results.

--swap

Swap byte order for all samples.

--tao-source

For reading or copying, indicates that the source CD was written in TAO mode.

--tao-source-adjust n

Use n link blocks for TAO source CDs. The default is two.

--with-cddb

Use CDDB to fetch information about the disc and save it as CD-TEXT data. Used with the copy, read-toc, and read-cd commands.

-write-speed-control n

If n is 0, disable writing speed control by the drive. The default is 1, which enables writing speed control.

-v verbose-level

Set the amount of information printed to the screen. 0, 1, and 2 are fine for most users; greater numbers are useful for debugging.

Name

cdrecord

Synopsis

    cdrecord [general-options] dev=device [track-options] track1 track2 ...

Record data or audio compact discs or DVDs. This program normally requires privileged user access, and has a large number of options and settings. A number of useful examples can be found in the manpage, which is quite extensive.

General Options

General options go directly after the cdrecord command name. Options affecting the track arguments are placed after the device argument and before the track arguments themselves. Options have two forms: traditional options that start with a hyphen, and "variable" assignments, of the form variable = value. Long named options start with only a single hyphen. The general options are:

-abort

Attempt to send an abort sequence to the drive. May be needed if other software has left the drive in an unusable state. cdrecord -reset may be necessary as well.

-atip

Display the ATIP (Absolute Time In Pregroove) information for a disc. Only some drives allow you to read this information.

blank= type

Erase data from a CD-RW in one of the following ways:

all

Erase all information on the disc. May take a long time.

fast

Perform a quick erase of the disc, erasing only the PMA, TOC, and pregap.

help

Display a possible list of blanking methods.

session

Blank the last session.

track

Blank a track.

trtail

Blank the tail of a track only.

unclose

Unclose the last session.

unreserve

Unreserve a track previously marked as reserved.

-checkdrive

Check to see if there are valid drivers for the current drive. Returns 0 if the drive is valid.

cuefile= file

Obtain all recording information from file, which is a CDRWIN-compliant CUE sheet file. This option disallows specifying individual track files, and also requires the use of -dao.

-dao, -sao

Disk-at-once mode. Works only with MMC drives that support non-raw session-at-once modes.

debug=n, -d

Set the debug level to an integer (greater numbers are more verbose), or use multiple -d flags as with the -v and -V flags.

defpregap= n

Set the default pre-gap size for all tracks except the first to n. Useful only with TEAC drives for creating TAO disks without the two-second silence between tracks. This option may be removed in future versions.

dev= target

Set the device used for writing CD or DVD media. See the section "The device Argument" later in this entry.

driver= name

Lets you specify a driver for your system. Suggested for experts only. The special drivers cdr_simul and dvd_simul are used for simulation and profiling tests.

driveropts= optlist

Specify a comma-separated list of driver options. To get a list of valid options, use driveropts=help and -checkdrive.

-dummy

Perform a dry run, doing all the steps of recording with the laser turned off. This will let you know whether the process is going to work.

-eject

Eject disc after recording. Some hardware may need to eject a disc after a dummy recording and before the actual recording.

-fix

Close ("fixate") the session, preventing future multisession recordings and allowing the disc to be played in standard audio CD players (some can also play a disc that has not been closed).

-force

Override errors if possible. May allow you to blank an otherwise broken CD-RW.

-format

Format CD-RW/DVD-RW/DVD+RW media. Currently only implemented for DVD+RW media, which must be formatted before the first use. However, cdrecord detects such media and automatically formats it in this case. This option is thus mainly useful to reformat a DVD+RW disc.

fs= n

Set the FIFO buffer size to n, in bytes. You may use k, m, s, or f to specify kilobytes, megabytes, or units of 2048 and 2352 bytes, respectively. The default is 4MB.

gracetime= n

Set the grace time before writing to n seconds. A value less than two seconds is ignored.

-ignsize

Ignores the known size of the medium. Debugging option, use with extreme care. Implies -overburn.

-immed

Experimental feature that sets the SCSI IMMED flag for certain commands. Useful on some systems where the CD/DVD writer and ATAPI hard disc are on the same bus or on SCSI systems that don't use disconnect/reconnect. Use with caution.

-inq

Do a drive inquiry, print the resulting information, and exit.

kdebug=n, kd=n

Set the kernel's debug notification value to n during SCSI command execution. Works through the scg-driver.

-load

Load media and exit. Works with tray-loading mechanisms only.

-lock

Load media, lock door, and exit. Works with tray-loading mechanisms only. Possibly useful with the Kodak disc transporter.

mcn= n

Set the Media Catalog Number to n.

minbuf= n

Experimental feature. Sets the minimum drive buffer fill ratio to n, which is a number between 25 and 95 for 25% to 95% minimum drive buffer fill ratio.

-msinfo

Get multisession information from the CD. Used only with multisession discs onto which you can still record more sessions.

-multi

Set to record in multisession mode. Must be present on all sessions but the last one for a multisession disc.

-noclose

Experimental feature: do not close the current track. Useful only in packet-writing mode.

-nofix

Do not close the disc after writing.

-overburn

Allow writing of more data than the official size of a medium. Not guaranteed to work on any specific drive.

-packet

Experimental feature: use packet-writing mode.

pktsize= n

Experimental feature: set the packet size to n. Forces fixed packet mode.

-prcap

Print the drive capabilities for SCSI-3/MMC-compliant drives. Values marked kB use 1000 bytes, while values marked KB use 1024 bytes.

-raw, -raw96r

Use RAW writing mode with 2352 byte sectors plus 96 bytes of raw P-W subchannel data. This results in a sector size of 2448 bytes. Useful for drives with bad firmware where TAO and SAO mode don't work. This option does require more CPU time, thus it may cause buffer underruns on slow CPUs.

Note: for this to work, cdrecord must know the size each track in advance. See the manpage for more information.

-raw16

Similar to -raw96r, but with a 2352 byte sector and 16 bytes of P-Q subchannel data. Does not allow writing CD-Text or CD+Graphics. Don't use if -raw96r does work on your drive.

-raw96p

Similar to -raw96r but not as widely supported. Don't use if -raw96r or -raw16 do work on your drive.

-reset

Attempt to reset the SCSI bus. Does not work on all systems.

-s, -silent

Silent mode. Do not print any SCSI error commands.

-scanbus

Scan for SCSI devices. Use this to find out which drives you have and to get the correct numbers for the dev= option.

-setdropts

Set the driver options list as provided by driveropts= and the dummy flag, and then exit. Useful to set parameters without burning or reading media.

speed= n

Set the speed to n, a multiple of the audio speed. Normally, cdrecord will get this from the CDR_SPEED environment variable. If your drive has trouble with higher numbers, try 0 as the value.

-tao

Use Track At Once (TAO) mode. Required for multi-session recording. This was the default writing mode in previous versions.

-text

Write CD-Text information. The information comes from either .inf files or from a CUE sheet file. Use with the -useinfo or cuefile= options.

textfile= file

Obtain CD-Text information from file, which must be in the binary file format defined in the Red Book. This is the best way to copy CD-Text data obtained from existing CDs.

timeout= n

Set the timeout to n seconds. Defaults to 40.

-toc

Display the table of contents for the CD currently in the drive. Works for CD-ROM as well as CD-R and CD-RW media.

ts= n

Set the maximum transfer size for a single SCSI command to n. The syntax for n is the same as for the fs= option. The default transfer size is 63 kB.

-useinfo

Use .inf files to override audio options set elsewhere.

-v

Verbose mode. Use one v for each level of verbosity: -vv would be very verbose, and -vvv would be even more so.

-V

As with the -v, a verbose mode counter. However, this applies only to SCSI transport messages. This will slow down the application.

-waiti

Wait for input to become available on standard input before opening the SCSI driver. This is necessary for multi-session recording, where mkisofs has to read the old session from the current disc before writing the new session, and mkisofs won't be able to open the device if cdrecord has already opened it.

The device Argument

The device argument is one of the more difficult parts of cdrecord. It consists of an optional transport specification, followed by a comma-separated list of integers representing the bus, target, and logical unit of the drive. The default transport is for a SCSI device. You can use cdrecord dev=help to see a list of supported transports. On some systems, you can use a device name followed by :@ to use that device; for example, on GNU/Linux, dev=/dev/scd0:@ for an external USB-connected DVD writer. For an IDE-connected CD writer, on GNU/Linux, you might use ATA:1,0,0.

Track Options and Arguments

Track options may be mixed with track arguments, and normally apply to the track immediately after them or to all tracks after them. The track arguments themselves should be the files that you will be writing to the CD or DVD. Options are:

-audio

Write all tracks after this track in digital audio format (playable by standard CD players). If you do not use this flag or the -data flag, cdrecord assumes that .au and .wav files are to be recorded as raw audio and that all other files are data.

-cdi

Write subsequent tracks in CDI format.

-copy

For subsequent audio tracks, indicate in the TOC that the audio data has permission to be copied without limit.

-data

Record subsequent tracks as CD-ROM data. If you do not use this flag or the -audio flag, all files except for those ending in .wav or .au are assumed to be data.

index= a,b,c

Set the index list for the next track. The values should be increasing comma-separated integers, starting with index 1 and counting in sectors (75ths of a second). For example, you could set three indices in a track with index=0,750,7500 and they would occur at the beginning of the track, after 10 seconds, and after 100 seconds.

-isosize

The size of the next track should match the size of the ISO-9660 filesystem. This is used when duplicating CDs or copying from raw-data filesystems.

isrc= n

Set the International Standard Recording Number for the track following this argument.

-mode2

Write all subsequent tracks in CD-ROM mode 2 format. Data size is a multiple of 2336 bytes.

-nocopy

For subsequent audio tracks, indicate in the TOC that the audio data has permission to be copied only once for personal use. This is the default.

-nopad

Do not insert blank data between data tracks following this flag. This is the default behavior.

-nopreemp

For subsequent audio tracks, indicate in the TOC that audio data was mastered with linear data. This is the default.

-noshorttrack

Require subsequent tracks to be at least four seconds in length. See -shorttrack.

-pad

Insert 15 sectors of blank data padding between data tracks. Applies to all subsequent tracks or until you use the -nopad argument, and is overridden by the padsize= n argument.

padsize= n

Insert n sectors of blank data padding after the next track. Applies only to the track immediately after it.

-preemp

For subsequent audio tracks, indicate in the TOC that audio data was sampled with 50/15 microsecond pre-emphasis.

pregap= n

Set the pre-gap size for the next track to n. Useful only with TEAC drives for creating TAO disks without the two-second silence between tracks. This option may be removed in future versions.

-scms

For subsequent audio tracks, indicate in the TOC that the audio data has no permission to be copied.

-shorttrack

Allow subsequent tracks to be less than four seconds in length, violating the Red Book standard. Useful only in SAO or RAW mode. Does not work with all drives.

-swab

Declare that your data is in byte-swapped (little-endian) byte order. This is not normally necessary.

tsize= n

Set the size of the next track. Useful only if you are recording from a raw disk for which cdrecord cannot determine the file size. If you are recording from an ISO 9660 filesystem, use the -isosize flag instead.

-xa

Write subsequent tracks in CD-ROM XA mode 2 form 1 format, with 2048-byte sectors.

-xa1

Write subsequent tracks in CD-ROM XA mode 2 form 1 format, with 2056-byte sectors.

-xa2

Write subsequent tracks in CD-ROM XA mode 2 form 2 format, with 2324-byte sectors.

-xamix

Write subsequent tracks in a way that allows mixing XA mode 2 forms 1 and 2. See the manpage.

Name

dir

Synopsis

    dir [options] [file]

List directory contents. dir is equivalent to the command ls -C -b (list files in columns, sorted vertically, special characters escaped) and it takes the same arguments as ls. This is an alternate invocation of the ls command and is provided for the convenience of those converting from Microsoft Windows and the DOS shell.

Name

dircolors

Synopsis

    dircolors [options] [file]

Set the color options for ls by changing the LS_COLORS environment variable. If you specify a file, dircolors reads it to determine which colors to use. Otherwise, it uses a default set of colors.

Options

-b, --sh, --bourne-shell

Use the Bourne shell syntax when setting the LS_COLORS variable.

-c, --csh, --c-shell

Use csh (C shell) syntax when setting the LS_COLORS variable.

-p, --print-database

Display the default colors. You can copy this information into a file and change it to suit your preferences, and then run the program with the file as its argument to set the colors to your new values.

Example

In your .profile, you might have this:

    eval 'dircolors'

Name

dvdrecord

Synopsis

    dvdrecord options files ...

Record DVDs. In earlier systems, dvdrecord was a modified version of cdrecord. In Fedora Core 3, the DVD functionality is part of cdrecord, and dvdrecord is a shell script that prints an informational message to this effect and then does an exec of cdrecord. See also cdrecord.

Name

gawk

Synopsis

    gawk [options] 'script' [var=value ...] [files ...]
    gawk [options] -f scriptfile [var=value ...] [files ...]

The GNU Project's implementation of the awk programming language. This is the standard version of awk on GNU/Linux systems. For more information see awk in the earlier section "Alphabetical Summary of Common Commands," and Chapter 11.

Name

gettextize

Synopsis

    gettextize [options] [directory]

Install GNU gettext infrastructure into a source package. This command copies files and directories into a source package so that a program can use GNU gettext for managing translations. The files are placed in directory if given, otherwise in the current directory. If the package already uses gettext, the infrastructure is upgraded to the current version.

Full documentation for GNU gettext is available in its manual. See http://www.gnu.org/software/gettext/ for more information and a pointer to the documentation.

Options

-c, --copy

Copy files instead of making symbolic links. (Recommended.)

-f, --force

Force creation of files, even if old ones exist. Useful for upgrading.

--intl

Create and install the libintl subdirectory, which holds a private copy of the gettext library.

-n, --dry-run

Print the changes that would be made, but don't actually do them.

--no-changelog

Do not create or update ChangeLog files.

Name

igawk

Synopsis

    igawk gawk-options files ...

A shell script that allows the use of file inclusion with awk programs. Distributed with GNU Awk (gawk). For more information, see Chapter 11.

Name

ispell

Synopsis

    ispell [options] [files]

Compare the words of one or more named files with the system dictionary. Display unrecognized words at the top of the screen, accompanied by possible correct spellings, and allow editing via a series of commands. See also aspell and spell in the earlier section "Alphabetical Summary of Common Commands."

URL: http://www.gnu.org/software/ispell.

Options

The -c, -D, and -e1, -e2, -e3, and -e4 options are specialized (for use by the munchlist helper program) and are not covered here.

-a

Function in back-end mode, printing a one-line version identification and then one line of output for each input word. See the manpage.

-A

Like -A, but read files named on lines beginning with &Include_File&. Includes may be nested up to five levels deep.

-b

Back up original file in filename .bak.

-B

Search for missing blanks (resulting in concatenated words) in addition to ordinary misspellings.

-C

Do not produce error messages in response to concatenated words.

-d file

Search file instead of the standard dictionary file.

-f outfile

Write output to outfile instead of to standard output. Must be used with -a or -A.

-F program

Use program to remove formatting markup.

-H

Input is in SGML/HTML format.

-k setname list

Add the keywords in list to the predefined set of keywords setname. See the manpage for details.

-l

Generate a list of misspelled words (batch mode).

-L number

Show number lines of context.

-m

Suggest different root/affix combinations.

-M

List interactive commands at bottom of screen.

-n

Expect nroff or troff input file.

-N

Suppress printing of interactive commands.

-p file

Search file instead of personal dictionary file.

-P

Do not attempt to suggest more root/affix combinations.

-S

Sort suggested replacements by likelihood that they are correct.

-t

Expect TEX or LATEX input file.

-T type

Expect all files to be formatted by type.

-v, -vv

With plain -v, print version information and exit. With -vv, also print compilation options.

-V

Use hat notation (^L) to display control characters, and M- to display characters with the high bit set.

-w chars

Consider chars to be legal, in addition to a-z and A-Z.

-W n

Never consider words that are n characters or fewer to be misspelled.

-x

Do not back up the original file.

Interactive commands

?

Display help screen.

space

Accept the word in this instance.

number

Replace with suggested word that corresponds to number.

! command

Invoke shell and execute command in it. Prompt before exiting.

a

Accept word as correctly spelled, but do not add it to personal dictionary.

i

Accept word and add it (with any current capitalization) to personal dictionary.

l

Search system dictionary for words.

q

Exit without saving.

r

Replace word.

u

Accept word and add lowercase version of it to personal dictionary.

x

Skip to the next file, saving changes.

^L

Redraw screen.

^Z

Suspend ispell.

Name

ltrace

Synopsis

    ltrace [options] command [arguments]

Trace the dynamic library calls for command and arguments. ltrace can also trace and print the system calls. It is very similar to strace (see also strace).

Options

-a n

Align the return values in column n.

-c

Count all calls and signals and create a summary report when the program has ended.

-C, --demangle

Demangle C++ encoded names.

-d, --debug

Debug mode. Print debugging information for ltrace on standard error.

-e[keyword=][!]values

Pass an expression to ltrace to limit the types of calls or signals that are traced or to change how they are displayed. See strace for the full list.

-f

Trace forked processes.

-h, --help

Print help and exit.

-i

Print instruction pointer with each system call.

-lfile, --libraryfile

Print only the symbols from library file. Up to 20 files may be specified.

-L

Do not display library calls. Use together with -S.

-ncount, --indentcount

Indent trace output by count spaces for each new nested function call.

-ofilename, --outputfilename

Write output to filename instead of standard error. If filename starts with the pipe symbol |, treat the rest of the name as a command to which output should be piped.

-p pid

Attach to the given process ID and begin tracking. ltrace can track more than one process if more than one -p option is given. Type CTRL-C to end the trace.

-r

Relative timestamp. Print time in microseconds between system calls.

-s n

Print only the first n characters of a string. Default value is 32.

-S

Display system calls and library calls.

-t

Print time of day on each line of output.

-tt

Print time of day with microseconds on each line of output.

-ttt

Print timestamp on each line as number of seconds since the Epoch.

-T

Print time spent in each system call.

-u username

Run command as username. Needed when tracing setuid and setgid programs.

-V

Print version and exit.

Name

lynx

Synopsis

    lynx [options] [path | URL]

lynx is a "text mode" browser, for use on ASCII terminals or terminal emulators. It is particularly valuable for taking a quick look at a web page when you don't want to wait for a graphical browser to start up on a heavily loaded system, and for use in scripts. It has an astonishing number of options.

URL: http://lynx.isc.org/.

Primary Options

-

Read arguments from standard input. Useful for long command lines and to avoid having sensitive arguments being visible with ps.

-base

For use with -source, prepend a request URL and BASE tag to text or HTML outputs.

-case

Make string searching case-sensitive.

-color

For use with the slang terminal library. Enable a default set of color control sequences that work on many terminals if the terminal description does not provide color control information.

-crawl

When used with -traversal, output each page to a separate file. When used with -dump, output is formatted as for -traversal but sent to standard output.

-dump

Send the formatted output to standard output. Useful for converting web pages to text files.

-editor= program

Use program as the external editor.

-emacskeys

Enable Emacs-style motion commands.

-ftp

Disallow FTP access.

-justify

Do text justification.

-source

Like -dump, but outputs HTML source, not formatted text.

-telnet

Do not allow telnet commands.

-term= termtype

Specify that the terminal is of type termtype. Especially useful for remote connections.

-traversal

Traverse all the HTTP links derived from the starting file or URL.

-use_mouse

Enable mouse actions if the underlying library supports the mouse. The left mouse button traverses a link and the right button pops back. Clicking on the top and bottom lines scroll up and down. For the ncurses library, the middle button pops up a simple menu.

-vikeys

Enable vi-style motion commands.

-width= count

Use count columns for formatting dumps. The default is 80.

-with_backspaces

For -dump and -crawl, place backspaces in the output (similar to the man command).

See the manpage for a description of the other options.

Name

mac2unix

Synopsis

    mac2unix [options] [-n infile outfile]

Convert files from Macintosh OS 9 format to Unix format. On GNU/Linux, the dos2unix and unix2dos commands accept the same options as mac2unix. See dos2unix in the earlier section "Alphabetical Summary of Common Commands" for the option list.

Name

md5sum

Synopsis

    md5sum [options] [file ...]
    md5sum [options] --check [file]

Compute or check the MD5 algorithm checksum for one or more files. The checksum is computed using the algorithm in RFC 1321. Use the saved output of the program as input when checking. See also sha1sum.

Options

-b, --binary

Use binary mode to read files. This is the default on non-Unix systems.

-c, --check

Check MD5 sums against the given list.

--status

Do not print anything. Instead, use the exit code to indicate success.

-t, --text

Read files in "text" mode. This is the default on Unix systems.

-w, --warn

Warn about checksum lines that are not formatted correctly.

Examples

$ md5sum bash-3.0.tar.gz > MD5SUM
                     Compute and save checksum
    $ cat MD5SUM
                     Show it
    26c4d642e29b3533d8d754995bc277b3  bash-3.0.tar.gz
    $ md5sum --check < MD5SUM
                     Verify it
    bash-3.0.tar.gz: OK

Name

mount

Synopsis

    mount [options] [[device] directory]

System administration command. Mount a file structure. The file structure on device is mounted on directory. If no device is specified, mount looks for an entry in /etc/fstab to find what device is associated with the given directory. The directory, which must already exist and should be empty, becomes the name of the root of the newly mounted file structure. If mount is invoked with no arguments, it displays the name of each mounted device, the directory on which it is mounted, its filesystem type, and any mount options associated with the device.

Options

-a

Mount all filesystems listed in /etc/fstab. Use -t to limit this to all filesystems of a particular type.

-f

Fake mount. Go through the motions of checking the device and directory, but do not actually mount the filesystem.

-F

When used with -a, fork a new process to mount each filesystem.

-h

Print help message, then exit.

-i

For a filesystem type fs, don't run the helper program /sbin/mount. fs.

-l

When reporting on mounted filesystems, show filesystem labels for filesystems that have them.

-L label

Mount filesystem with the specified label.

-n

Do not record the mount in /etc/mtab.

-o option

Qualify the mount with a mount option. Many filesystem types have their own options. The following are common to most filesystems:

async

Do input and output to the device asynchronously.

atime, noatime

Update inode access time for each access. This is the default behavior. noatime does not update the access time.

auto, noauto

Allow (do not allow) mounting with the -a option.

defaults

Use all options' default values (async, auto, dev, exec, nouser, rw, suid).

dev, nodev

The dev option allows the system to interpret any special devices that exist on the filesystem as device files. The nodev option disallows it; device files are ignored.

dirsync

All directory updates on the filesystem should be done synchronously.

exec, noexec

The exec option allows the system to execute binary files on the filesystem. The noexec option disallows it.

_netdev

Filesystem is a network device requiring network access.

remount

Expect the filesystem to have already been mounted, and remount it.

ro

Allow read-only access to the filesystem.

rw

Allow read/write access to the filesystem.

suid, nosuid

Acknowledge (do not acknowledge) setuid and setgid bits.

user, nouser

Allow (do not allow) unprivileged users to mount or unmount the filesystem. The defaults on such a filesystem will be nodev, noexec, and nosuid, unless otherwise specified.

users

Allow any user to mount or unmount the filesystem. The defaults on such a filesystem will be nodev, noexec, and nosuid, unless otherwise specified.

-O option

Limit systems mounted with -a by its filesystem options. (As used with -o.) Use a comma-separated list to specify more than one option, and prefix an option with no to exclude filesystems with that option. Options -t and -O are cumulative.

-p fd

For an encrypted filesystem, read the passphrase from file descriptor number fd.

-r

Mount filesystem read-only.

-s

Where possible, ignore mount options specified by -o that are not supported by the filesystem.

-t type

Specify the filesystem type. Possible values include adfs, affs, autofs, coda, cramfs, devpts, efs, ext2, ext3, hfs, hpfs, iso9660, jfs, msdos, ncpfs, nfs, nfs4 ntfs, proc, qnx4, ramfs, reiserfs, romfs, smbfs, sysv, tmpfs, udf, ufs, umsdos, usbfs, vfat, and xfs. The default type is iso9660. The type auto may also be used to have mount autodetect the filesystem. When used with -a, this option can limit the types mounted. Use a comma-separated list to specify more than one type to mount, and prefix a type with no to exclude that type.

-U uuid

Mount filesystem with the specified uuid.

-v

Display mount information verbosely.

-V

Print version, then exit.

-w

Mount filesystem read/write. This is the default.

Files

/etc/fstab

List of filesystems to be mounted and options to use when mounting them.

/etc/mtab

List of filesystems currently mounted and the options with which they were mounted.

/proc/partitions

Used to find filesystems by label and UUID.

Name

mutt

Synopsis

    mutt [reading-options]
    mutt [sending-options] address ...

mutt is a screen-oriented Mail User Agent (MUA) program, for reading and sending mail. Its design is derived from that of several earlier MUA programs, including Berkeley Mail, ELM, and MUSH: hence the name.

URL: http://www.mutt.org/.

Options

-a file

Attach file to the message using MIME.

-b address

Send a blind carbon copy (BCC) to address.

-c address

Send a carbon copy (CC) to address.

-e command

Run command after reading the configuration files.

-f file

Use file as the mailbox to read messages from.

-F muttrcfile

Read muttrcfile for initialization, instead of $HOME/.muttrc.

-h

Print an option summary and exit.

-H draftfile

Read an initial message header and body from draftfile when sending a message.

-i file

Include the contents of file into a message.

-m type

Use mailbox type type. Possible values are mbox, MMDF, MH, and Maildir.

-n

Do not read the sytsem configuration file /etc/Muttrc.

-p

Continue a postponed message.

-R

Process a mailbox in read-only mode.

-s text

Use text as the subject of the message.

-v

Print version and compile-time option information, and exit.

-x

Emulate the mailx compose mode.

-y

At startup, list all mailboxes specified with the mailboxes command.

-z

When used with -f, do not start if the mailbox is empty.

-Z

Process the first mailbox specified with the mailboxes command that contains new mail. If there are none, exit immediately.

Name

ooffice

Synopsis

    ooffice [files]

The Open Office office productivity suite . A set of commands that provides compatibility with other widely used office productivity programs.

URL: http://www.openoffice.org/.

Tools

Calc

A "feature-packed" spreadsheet program with built-in charting tools.

Database tools

Tools for doing database work in spreadsheet-like form. The tools support dBASE databases for simple applications, or OODBC or JDBC compliant databases for "industrial strength" work.

Draw

A program for producing illustrations.

Impress

A program for creating multimedia presentations.

Math

A component for use with Writer in creating equations and formulae, it may also be used standalone.

Writer

A word processor for documents, reports, newsletters, brochures, etc.

Name

pdksh

Synopsis

    pdksh [options] [arguments ...]

The Public Domain Korn Shell. pdksh is a fairly complete although not exact clone of the 1988 Korn shell. Full details are available in the online manpage and at the web site. For more information about the Korn shell, see Chapter 4.

URL: http://web.cs.mun.ca/~michael/pdksh/.

Name

ps

Synopsis

    ps [options]

Report on active processes. ps has three types of options. GNU long options start with two dashes, which are required. BSD options may be grouped and do not start with a dash, while Unix98 options may be grouped and require an initial dash. The meaning of the short options can vary depending on whether or not there is a dash. In options, list arguments should either be separated by commas or put in double quotes. In comparing the amount of output produced, note that e prints more than a and l prints more than f for each entry.

Options

nums, pnums, -pnums, --pid=nums

Include only specified processes, which are given in a space-delimited list.

--nums, --sid=nums

Include only specified session IDs, which are given in a space-delimited list.

[-]a

As a, list all processes on a terminal. As -a, list all processes on a terminal except session leaders.

[-]c

As c, show the true command name. As -c, show different scheduler information with -l.

-C cmds

Select by command name.

--cols=cols, --columns=cols, --width=cols

Set the output width (the number of columns to display).

-d

Select all processes except session leaders.

-e, -A

Select all processes.

e

Include environment information after the command.

[-]f, -F, --forest

As -f, display full listing. As f or --forest, display "forest" family tree format, with ASCII art showing the relationships.

-glist, -Glist, --group=groups, --Group=groups

For -g, select by session leader if list contains numbers, or by group if it contains group names. For -G, select by the group IDs in list. --group selects by effective group and --Group selects by real group, where groups can be either group names or group IDs.

h, --no-headers

Suppress header. If you select a BSD personality by setting the environment variable PS_PERSONALITY to bsd, then h prints a header on each page.

H, -H

As H, display threads as if they were processes. As -H, display "forest" family tree format, without ASCII art.

--headers

Repeat headers.

--info

Print debugging information.

[-]j

Jobs format. j prints more information than -j.

[-]l

Produce a long listing. -l prints more information than l.

L, -L

As L, print list of field specifiers that can be used for output formatting or for sorting. As -L, show threads, possibly with LWP and NLWP columns.

--lines=num, --rows=num

Set the screen height to num lines. If --headers is also set, the headers repeat every num lines.

[-]m

Show threads.

-M

Add security data for SELinux.

n

Print user IDs and WCHAN numerically.

-nfile, Nfile

Specify the system map file for ps to use as a namelist file. The map file must correspond to the Linux kernel; e.g., /boot/System.map-2.6.9-1.667.

-N, --deselect

Negate the selection.

[-]ofields, --format=fields

As -o, o, or --format, specify user-defined format with a list of fields to display.

[-]Ofields

As -O, is like -o, but some common fields are predefined. As O, can be either the same as -O in specifying fields to display, or can specify single-letter fields for sorting. For sorting, each field specified as a key can optionally have a leading + (return to default sort direction on key) or - (reverse the default direction).

--ppid pids

Include only processes whose parent process IDs are in pids.

r

Show only processes that are currently running.

s

Display signal format.

-s sessions

Show processes belonging to the specified sessions.

S, --cumulative

As S, sum up certain information, such as CPU usage from dead children. Otherwise, include some dead child process data in parent total.

--sort sort-spec

Like O for sorting.

[-]t[ttys], --tty=ttys

Display processes running on the specified terminals. As t, ttys may be missing, which specifies the current terminal.

T

Display all processes on this terminal.

[-]u [users], --user=users

As u with no argument, display user-oriented output. As -u or --users, display by effective user ID (and also support names), showing results for users. With no argument, -u displays results for the current user.

[-]Uusers, --User=users

As U, display processes for the specified users. As -U or --User, display processes for users by real user ID (and also support names).

v

Display virtual memory format.

[-]V, --version

Display version information and then exit.

[-]w

Wide format. Don't truncate long lines.

x

Display processes without an associated terminal.

X

Use old Linux i386 register format.

-y

Do not show flags; show rss instead of addr.

[-]Z, --context

As Z, add security data for SELinux. As -Z, display the security context format, also for SELinux.

Sort keys

c, cmd

Name of executable.

C, pcpu

CPU utilization.

f, flags

Flags.

g, pgrp

Group ID of process.

G, tpgid

Group ID of associated tty.

j, cutime

Cumulative user time.

J, cstime

Cumulative system time.

k, utime

User time.

m, min_flt

Number of minor page faults.

M, maj_flt

Number of major page faults.

n, cmin_flt

Total minor page faults.

N, cmaj_flt

Total major page faults.

o, session

Session ID.

p, pid

Process ID.

P, ppid

Parent's process ID.

r, rss

Resident set size.

R, resident

Resident pages.

s, size

Kilobytes of memory used.

S, share

Number of shared pages.

t, tty

Terminal.

T, start_time

Process's start time.

u, user

User's name.

U, uid

User ID.

v, vsize

Bytes of virtual memory used.

y, priority

Kernel's scheduling priority.

Fields

%CPU

Percent of CPU time used recently.

%MEM

Percent of memory used.

ADDR

Address of the process.

BLOCKED

Mask of blocked signals.

C

CPU utilization percentage.

CAUGHT

Mask of caught signals.

CLS, POL

Process scheduling class.

CMD, COMMAND

The command the process is running.

CP

Per-mill CPU usage.

EGID, GID

Effective group ID as a decimal integer.

EGROUP, GROUP

Effective group ID as a name if available, otherwise as a number.

EIP

Instruction pointer.

ELAPSED

Elapsed time since the start of the process.

ESP

Stack pointer.

EUID, UID

Effective user ID as a decimal integer.

EUSER, USER

Effective user ID as a name if available, otherwise as a number.

F

Process flags:

001 Print alignment warning messages.

002 Being created.

004 Being shut down.

010 ptrace(0) has been called.

020 Tracing system calls.

040 Forked but didn't exec.

100 Used superuser privileges.

200 Dumped core.

400 Killed by a signal.

FGID

Filesystem access group ID as a decimal integer.

FGROUP

Filesystem access group ID as a name if available, otherwise as a number.

FUID

Filesystem access user ID as a decimal integer.

FUSER

Filesystem access user ID as a name if available, otherwise as a number.

IGNORED

Mask of ignored signals.

LABEL

SELinux security label for Mandatory Access Control.

LWP, SPID, TID

Lightweight process (thread) ID.

NI

The nice value of the process. A higher number indicates less CPU priority.

NLWP, THCNT

Number of lightweight processes (threads) in the process.

PENDING

Mask of pending signals.

PGID, PGRP

Process group ID.

PID

Process ID.

PPID

Parent process ID.

PRI

Process's scheduling priority. A higher number indicates lower priority.

P, PSR

Processor that the process is assigned to.

RGID

Real group ID as a decimal integer.

RGROUP

Real group ID as a name if available, otherwise as a number.

RSS, RSZ

Resident set size (the amount of physical memory), in kilobytes.

RTPRIO

Realtime priority.

RUID

Real user ID as a decimal integer.

RUSER

Real user ID as a name if available, otherwise as a number.

S

One-character state display.

SCH

Process's scheduling policy.

SESS, SID

Process's session ID.

SGID, SVGID

Saved group ID as a decimal integer.

SGROUP

Saved group ID as a name if available, otherwise as a number.

SHARE

Shared memory.

SIZE

Size of virtual image.

STACKP

Address of the bottom (start) of the process's stack.

START

Process start time in HH:MM format.

STARTED

Process start time in HH:MM:SS format.

STAT

Status:

D Asleep and not interruptible.

N Positive nice value (third field).

R Runnable.

S Asleep.

T Stopped.

W No resident pages (second field).

Z Zombie.

SUID, SVUID

Saved user ID as a decimal integer.

SUSER

Saved user ID as a name if available, otherwise as a number.

SWAP

Amount of swap used, in kilobytes.

SZ

Approximate amount of swap needed to write out entire process.

TIME

Cumulative CPU time.

TPGID

Foreground process group ID for terminal.

TRS

Size of resident text.

TT, TTY

Associated terminal.

VSZ

Virtual memory size, in kilobytes.

WCHAN

Kernel function in which process resides.

Name

rename

Synopsis

    rename from to files ...

Rename files by replacing the first occurrence of from in each filename with to.

Example

Rename files that start with test so they start with mytest:

    rename test mytest test*

Name

seq

Synopsis

    seq [options] [first [increment]]last

Print the numbers from first through last by increment. The default is to print one number per line to standard output. Both first and increment can be omitted and default to 1, but if first is omitted then increment must also be omitted. In other words, if only two numbers are specified, they are taken to be the first and last numbers. The numbers are treated as floating point.

Options

-fformat, --format=format

Write the output using the specified printf floating-point format, which can be one of %e, %f, or %g (the default).

-sstring, --separator=string

Use string to separate numbers in the output. Default is newline.

-w, --equal-width

Equalize the width of the numbers by padding with leading zeros. (Use -f for other types of padding.)

Name

sha1sum

Synopsis

    sha1sum [options] [file ...]
    sha1sum [options] --check [file]

Compute or check SHA1 160-bit checksums for one or more files. The checksum is computed using the algorithm in FIPS-180-1. Use the saved output of the program as input when checking. See also md5sum.

Options

-b, --binary

Use binary mode to read files. This is the default on non-Unix systems.

-c, --check

Check SHA1 sums against the given list.

--status

Do not print anything. Instead, use the exit code to indicate success.

-t, --text

Read files in "text" mode. This is the default on Unix systems.

-w, --warn

Warn about checksum lines that are not formatted correctly.

Examples

$ sha1sum bash-3.0.tar.gz > SHA1SUM
                     Compute and save checksum
    $ cat SHA1SUM
                     Show it
    3acf1ff4910d4bc863620c7533cbf4858370017b  bash-3.0.tar.gz
    $ sha1sum --check < SHA1SUM
                     Verify it
    bash-3.0.tar.gz: OK

Name

shred

Synopsis

    shred [options]files

Overwrite a file to make the contents unrecoverable, and delete the file afterwards if requested.

Options

-

Shred standard output.

-num, --iterations=num

Overwrite files num times (default is 25).

-f, --force

Force permissions to allow writing to files.

-snum, --size=num

Shred num bytes. num can be expressed with suffixes (e.g., K, M, or G).

-u, --remove

Remove file after overwriting. shred does not remove the file unless this option is specified.

-v, --verbose

Verbose mode.

-x, --exact

Shred the exact file size; do not round up to the next full block.

-z, --zero

On the final pass, overwrite with zeros to hide the shredding.

Name

skill

Synopsis

    skill [signal] [options] processes
    snice [priority] [options]processes

Send a signal to processes or reset the priority. The default signal for skill is TERM, and the default priority for snice is +4 but can be in the range +20 (slowest) to -20 (fastest). The selection options -c, -p, -t, and -u are not required, but can be specified to insure that processes are interpreted correctly.

Options

-c

The next argument is a command.

-i

Use interactive mode.

-l, -L

List available signals.

-n

Display the process ID, but take no other action.

-p

The next argument is a process ID.

-t

The next argument is a tty or pty.

-u

The next argument is a username.

-v

Verbose mode.

-w

Enable warnings.

Name

slocate

Synopsis

    slocate [options] [search-string]

Security Enhanced version of GNU locate. This command searches a database listing every file on the system; it is intended as a faster replacement for find / -name pattern .... (See locate in the "Alphabetical Summary of Common Commands" section earlier in this chapter). This version stores file permissions and ownership, in order to prevent unauthorized access to files.

URL: http://www.geekreview.org/slocate/.

Options

-c

Read /etc/updatedb.conf when updating the database.

-dfile, --database=file

Use file as the database to search.

-edir1[,dir2...]

Exclude the given directories from the database.

-ffstype1[,fstype2...]

Exclude files on filesystems of the given types (e.g., NFS).

-h, --help

Print an option summary and exit.

-i

Ignore case when searching.

-l level

Security level. If level is 0, no security checks are done, providing faster searches. The default is 1, which turns on security checking.

-n count

Do not print more than count results.

-ofile, --output=file

Use file as the database to create.

-q

Do not print error messages (quiet mode).

-rregex, --regexp=regex

Use the Basic Regular Expression regex to search the database.

-u

Create the database starting at /.

-U dir

Create the database starting at dir.

-v, --verbose

Display filenames when creating the database.

-V, --version

Print version information and exit.

Name

splint

Synopsis

    splint [options] files ...

Secure Programming Lint. A freely available version of the original Unix lint command, splint performs static checking of C programs. By adding annotations in the form of special comments to your source files, splint can perform many additional, stronger checks than would otherwise be possible.

splint has a very large number of options. They are broken down here into separate sections based on task. splint allows the use of a leading + and a leading minus to indicate an option. In many cases they do the same thing; in others one enables a feature while the other disables it.

URL: http://www.splint.org/.

Initialization Options

-f file

Read options from file instead of from $HOME/.splintrc.

-I dir

Add dir to the list of directories searched for C include files. As with the C compiler, there is no space separating the -I from the directory name.

-nof

Do not read either of the default option files ./.splintrc and $HOME/.splintrc.

-S dir

Add dir to the list of directories searched for .lcl specification files.

-tmpdir directory

Use directory for temporary files. The default is /tmp.

-systemdirs dirlist

Set the list of system directories to search for include files. The default is /usr/include. To include multiple directories, separate them with a colon.

-systemdirerrors

Do not report errors for files in system directories.

Preprocessor Options

-D macro-definition

Define a macro. This option is passed on to the C preprocessor.

-U macroname

Undefine a macro. This option is passed on to the C preprocessor.

Library Options

-1-lib

Use the Unix version of the standard library.

-1-strict-lib

Use the "strict" version of the Unix standard library.

-ansi-lib

Use the ANSI standard library. This is the default.

-dump file

Save splint's state in file. The default file extension is .lcd.

-load file

Load state from file, created previously with -dump. See the online documentation for more information.

-nolib

Do not load information about any library. This also prevents loading information about the standard C library.

-posix-lib

Use the POSIX version of the standard library.

-posix-strict-lib

Use the "strict" version of the POSIX standard library.

-strict-lib

Use the "strict" version of the ANSI standard library.

Output Options

Use a leading minus to disable these options, and a leading + to enable them. By default they are all disabled.

-limit count

Do not report more than count similar errors consecutively. Instead, show a count of suppressed errors.

-quiet

Do not print version information or the error count summary.

-showalluses

Print a list of external identifiers and their uses, sorted by the number of times each one is used.

-showscan

Print each filename as it's processed.

-showsummary

Print a summary of reported and suppressed errors. The count of suppressed errors may not be completely correct.

-stats

Print the number of lines processed and the time it took to check them.

-timedist

Print a distribution showing where the checking time was spent.

-usestderr

Send error messages to standard error instead of to standard output.

-whichlib

Print the filename and creation info for the standard library.

Expected Errors Option

-expect count

Expect count errors. Exit with a failure status if exactly that number of errors are not detected. Useful for use with make.

Message Format Options

For most of these options, a leading + turns on the behavior, whereas a leading minus turns it off. You may use either one for the -limit and -linelen options.

-forcehints

Similar to -hints, but provide hints for all errors in a class, not just the first one. Default is off.

-hints

Give hints describing the error and how to suppress it for the first error in each error class. Default is on.

-linelen count

Set the maximum line length for a message line to count. Default is 80.

-paren-file-format

Use messages of the form file(line).

-showallconj

Print all possible alternate types. See the online documentation for more information. Default is off.

-showcolumn

Print the column number of the error. Default is on.

-showfunc

Print the name of the macro or function containing the error. Function names are only printed once. Default is on.

Mode Options

The mode flags enable a coarse-grain grouping of different classes of checking. For more detail, use splint -help modes. From weakest to strongest, the options are -weak, -standard, -checks, and -strict.

-checks

Strict checking. It does the same checking as -standard, plus must modification checking, rep exposure, return alias, memory management, and complete interfaces.

-standard

This is the default. It does the same checking as -weak, plus modifies checking, global alias checking, use all parameters, using released storage, ignored return values of any type, macro checking, unreachable code, infinite loops, and fall-through cases. Old style declarations are reported. The types bool, int, and char are treated as being distinct.

-strict

"Absurdly strict checking." Does the same checking as -checks, plus modifications and global variables used in unspecified functions, strict standard library, and strict typing of C operators. The manpage states "A special reward will be presented to the first person to produce a real program that produces no errors with strict checking."

-weak

Checking intended for unannotated C code. In particular, splint does not do modifies checking, macro checking, rep exposure, or clean interface checking. It is allowed to ignore int return values. Old style declarations are not reported. The types bool, int, char, and enum are treated as being the same.

Name

strace

Synopsis

    strace [options] command [arguments]

Trace the system calls and signals for command and arguments. strace shows you how data is passed between the program and the system kernel. With no options, strace prints a line to standard error for each system call. It shows the call name, arguments given, return value, and any error messages generated. A signal is printed with both its signal symbol and a descriptive string.

Options

-a n

Align the return values in column n.

-c

Count all calls and signals and create a summary report when the program has ended.

-d

Debug mode. Print debugging information for strace on standard error.

-e[keyword=][!]values

Pass an expression to strace to limit the types of calls or signals that are traced or to change how they are displayed. If no keyword is given, trace is assumed. The values can be given as a comma-separated list. Preceding the list with an exclamation mark (!) negates the list. The special values all and none are valid, as are the values listed with the following keywords.

abbrev= names

Abbreviate output from large structures for system calls listed in names.

read= descriptors

Print all data read from the given file descriptors.

signal= symbols

Trace the listed signal symbols (for example, signal=SIGIO,SIGHUP).

trace= sets

sets may be a list of system call names or one of the following:

file

Calls that take a filename as an argument

ipc

Interprocess communication

network

Network-related

process

Process management

signal

Signal-related

raw= names

Print arguments for the given system calls in hexadecimal.

verbose= names

Unabbreviate structures for the given system calls. Default is none.

write= descriptors

Print all data written to the given file descriptors.

-Evar[=val]

With no val, remove var from the environment before running command. Otherwise, run command with environment variable var defined to val in the environment.

-f

Trace forked processes.

-ff

Write system calls for forked processes to separate files named filename.pid when using the -o option.

-h

Print help and exit.

-i

Print instruction pointer with each system call.

-o filename

Write output to filename instead of standard error. If filename starts with the pipe symbol |, treat the rest of the name as a command to which output should be piped.

-O n

Override strace's built-in timing estimates, and just subtract n microseconds from the timing of each system call to adjust for the time it takes to measure the call.

-p pid

Attach to the given process ID and begin tracing. strace can trace more than one process if more than one -p option is given. Type CTRL-C to end the trace.

-q

Quiet mode. Suppress attach and detach messages.

-r

Relative timestamp. Print time in microseconds between system calls.

-s n

Print only the first n characters of a string. Default value is 32.

-S value

Sort output of -c option by the given value. value may be calls, name, time, or nothing. Default is time.

-t

Print time of day on each line of output.

-tt

Print time of day with microseconds on each line of output.

-ttt

Print timestamp on each line as number of seconds since the Epoch.

-T

Print time spent in each system call.

-u username

Run command as username. Needed when tracing setuid and setgid programs.

-v

Verbose. Do not abbreviate structure information.

-V

Print version and exit.

-x

Print all non-ASCII strings in hexadecimal.

-xx

Print all strings in hexadecimal.

Name

umount

Synopsis

    umount [options] [directory | special-device]

System administration command. Unmount a filesystem. umount announces to the system that the removable file structure previously mounted on the specified directory is to be removed. umount also accepts the special-device to indicate the filesystem to be unmounted; however, this usage is obsolete and will fail if the device is mounted on more than one directory. Any pending I/O for the filesystem is completed, and the file structure is flagged as clean. A busy filesystem (one with open files or with a directory that is some process's current directory) cannot be unmounted.

Options

-a

Unmount all filesystems that are listed in /etc/mtab.

-d

If the unmounted device was a loop device, free the loop device too. See also losetup(8).

-f

Force the unmount.

-h

Print help message and exit.

-l

Lazy unmount. Detach the filesystem from the hierarchy immediately, but don't clean up references until it is no longer busy. Requires kernel 2.4.11 or later.

-n

Unmount, but do not record changes in /etc/mtab.

-O options

Unmount only filesystems with the specified options in /etc/fstab. Specify multiple options as a comma-separated list. Add no as a prefix to an option to indicate filesystems that should not be unmounted.

-r

If unmounting fails, try to remount read-only.

-t type

Unmount only filesystems of type type. Multiple types can be specified as a comma-separated list, and any type can be prefixed with no to specify that filesystems of that type should not be unmounted.

-v

Verbose mode.

-V

Print version information and exit.

Name

watch

Synopsis

    watch [options] command [cmd_options]

Run the specified command repeatedly (by default, every 2 seconds) and display the output so you can watch it change over time. The command and any options are passed to sh -c, so you may need to use quotes to get correct results.

Options

-d, --differences[=cumulative]

Highlight changes between iterations. If cumulative is specified, the highlighting remains on the screen throughout, giving a cumulative picture of the changes.

-h, --help

Display help message and exit.

-nsecs, --interval=secs

Run the command every secs seconds.

-t, --no-title

Do not print a header line.

-v, --version

Print version information and exit.

Name

wget

Synopsis

    wget [options] [URL ...]

wget retrieves files from the Internet, most often using FTP or HTTP. It is capable of following links embedded in retrieved files, making it possible to mirror entire web sites. It has a plethora of options, making it difficult to use easily. See also curl in the earlier section "Alphabetical Summary of Common Commands."

URL: http://www.gnu.org/software/wget/.

Primary Options

-afile, --append-output=file

The same as -o, but output is appended to the file, instead of overwriting it.

-b, --background

Start off in the background. If no log file is specified with -o, use wget-log.

-c, --continue

Continue retrieving a file that was partially downloaded. Very useful if a previous download was interrupted. See the manpage for some version-dependent caveats.

-d, --debug

Enable debugging output.

-h, --help

Print a help message summarizing the options and exit.

--http-passwd= password

Use password as the password when an HTTP server prompts for a user and password. See the manpage for a discussion of security issues.

--http-user= user

Use user as the user when an HTTP server prompts for a user and password. See the manpage for a discussion of security issues.

-Idirlist, --include-directories=dirlist

When downloading, follow the directories in the comma-separated list dirlist. Elements in dirlist may contain wildcards.

-ldepth, --level=depth

Set the maximum recursion level to depth. The default is five.

-m, --mirror

Enable options needed for mirroring. Equivalent to -r -N -l inf --no-remove-listing.

--no-glob

Turn off FTP globbing (wildcard expansion). Globbing is automatically enabled if a URL contains shell wildcard characters. URLs with such characters should be quoted to protect them from the shell.

-nv, --non-verbose

More verbose than -q but less verbose than -v. Only errors and basic information are printed.

-ofile, --output-file=file

Log all messages to file, instead of to standard error.

-Pprefix, --directory-prefix=prefix

Use prefix for the directory prefix, i.e., the directory under which all retrieved files are saved. The default is . (dot), i.e., the current directory.

--passive-ftp

Use passive FTP to retrieve files. Often needed for clients residing behind a firewall.

--progress= type

Set the progress indicator. Valid values are dot and bar, the default is bar.

--proxy-passwd= password

Use password as the password for authentication on a proxy server. See the manpage for a discussion of security issues.

--proxy-user= user

Use user as the user for authentication on a proxy server. See the manpage for a discussion of security issues.

-q, --quiet

Be quiet, printing no output.

-r, --recursive

Enable recursive retrieval.

-tcount, --tries=count

Retry no more than count times. Use 0 or inf to retry infinitely. The default is to retry 20 times.

-v, --verbose

Be verbose. This is the default.

-V, --version

Print a version message and exit.

-Xdirlist, --exclude-directories=dirlist

When downloading, exclude the directories in the comma-separated list dirlist from consideration. Elements in dirlist may contain wildcards.

-Yval, --proxy=val

Enable/disable proxy support. Use one of on or off for val.

See the manpage for a description of the other options.

Name

xmlto

Synopsis

    xmlto [options]format file

Convert a DocBook/XML file into a formatted file. The format is typically something like pdf or html. The file should be a text file containing DocBook/XML markup. xmlto applies a stylesheet to convert the document to the appropriate format, possibly formatting it in the process.

Available Formats

dvi

TeX DVI file.

fo

XSL-FO formatting objects.

html

Hypertext Markup Language.

html-nochunks

HTML, in one large file.

htmlhelp

HTML Help files.

javahelp

Java Help files.

man

Unix-style manpages.

pdf

Adobe's Portable Document Format (PDF) files.

ps

PostScript files.

txt

Plain text files.

xhtml

XHTML (XML-derived HTML) files.

xhtml-nochunks

XHTML, in one large file.

Options

--extensions

Enable stylesheet extensions for the toolchain in use.

-m XSL-file

Use the XSL in XSL-file to modify the stylesheet.

-o dir

Place output files in the directory dir instead of in the current directory.

-p options

Pass the options on to the post-processing program. Repeat -p to pass options on to the second stage post-processor. (This currently applies only to the ps format, which uses TeX to produce DVI and dvips to produce PostScript.)

--searchpath path

Add the directories in the colon-separated path to the search path for files to include.

--skip-validation

Skip the normal validation check.

-x stylesheet

Use stylesheet instead of picking one automatically.

Examples

Produce a PDF file from DocBook/XML input:

        xmlto pdf brochure.xml

Generate HTML in a separate directory:

        xmlto -o /share/webserver/brochure html brochure.xml

Alphabetical Summary of Mac OS X Commands

Name

apply

Synopsis

    apply [options] command argument ...

Apply command to one or more of the following arguments in turn. command may contain a % followed by a digit from 1 to 9. Such text is replaced with the corresponding following unused argument.

Options

- N

Use arguments in groups of N. For example, -2 uses two arguments for each invocation of command. Occurrences of % N in command override this option.

-a char

Use char instead of % as the special character to represent arguments.

-d

Display the commands that would be executed, but don't actually execute them.

Example

Run awk against multiple test programs and data. The example uses brace expansion as in Bash and tcsh:

    apply -2 'awk -f' test1.{awk,in} test2.{awk,in} test3.{awk,in}

Name

chflags

Synopsis

    chflags [-R [-H | -L | -P]] flags file ...

Change the file flags associated with files. The flags are additional control bits that can be displayed by using ls -lo.

Options

-H

With -R, follow symbolic links on the command line. Symbolic links found during file traversal normally are not followed.

-L

With -R, follow all symbolic links.

-P

With -R, don't follow any symbolic links. This is the default.

-R

Recursive. For each file that is a directory, change the flags in the entire contained directory hierarchy. Otherwise, just changes the flags for each named file.

Flags

arch, archived

The archived flag (privileged user only)

nodump

The nodump flag (owner or privileged user only)

opaque

The opaque flag (owner or privileged user only)

sappnd, sappend

The system append-only flag (privileged user only)

schg, schange, simmutable

The system immutable flag (privileged user only)

sunlnk, sunlink

The system undeletable flag (privileged user only)

uappnd, uappend

The user append-only flag (owner or privileged user only)

uchg, uchange, uimmutable

The user immutable flag (owner or privileged user only)

uunlnk, uunlink

The user undeletable flag (owner or privileged user only)

Put the letters no in front of a flag name to clear the given flag. Symbolic links don't have flags, thus the operation always succeeds but makes no change.

Name

chfn

Synopsis

    chfn [options] [user]

Identical to chpass. See chpass for more information.

Name

chpass

Synopsis

    chpass [options] [user]

Change information in the user database. If supplied, the information for user is changed; otherwise, the current user's information is updated. Only a privileged user may change information for a different user, and several options are restricted to privileged users. chpass places the information into a temporary file and invokes an editor. Once the new values are filled in and the information is verified, the program updates the system's user database, /etc/master.passwd.

Tip

On Mac OS X, you are probably better off using the graphical system administration tools for user management.

Options

-a list

Use the literal user database entry list directly. It is a colon-separated list of items as found in each line of /etc/master.passwd. Privileged users only.

-e time

Set the account's expire time to time. Privileged users only.

-p pass

Use pass as the encrypted password. See getpwent(3) for the implications of this option. Privileged users only.

-s shell

Use shell as the user's shell. Valid shells are listed in /etc/shells.

Name

chsh

Synopsis

    chsh [options] [user]

Identical to chpass. See chpass for more information.

Name

defaults

Synopsis

    defaults [options] command [arguments]

Access or update the application defaults database. Most Mac OS X applications maintain a set of application defaults in a per-user database. The database provides storage for these defaults for when the application is not running. The defaults command provides access to this database from the Unix shell. Besides the per-user database, there is also a system-wide, global database of default values.

Applications are specified either by name with the -app option, or via a Java-style domain name, such as com.apple.TextEdit. Defaults are stored as key/value pairs. Keys are always strings, but values may be complicated structures such as arrays and dictionaries, or strings or binary data. They are stored as XML property lists.

Tip

It is inadvisable to change the defaults for an application that is running. The application will not see the change, and could potentially overwrite the new values when it exits.

Options

-app appname

Access the defaults for application appname.

-array

The value for a preference key is an array. The array values are given as separate arguments in a list. The new value overwrites any previous value for the key.

-array-add

Like -array, but the new elements are appended to an existing array of values.

-bool[ean]

The value for a preference key is a boolean. The value must be one of TRUE, FALSE, YES, or NO.

-currentHost

Preference operations may be performed only on the current host.

-data

The value for a preference key consists of raw data bytes. The data must be provided in hexadecimal.

-date

The value for a preference key is a date.

-dict

The value for a preference key is a dictionary. Dictionaries consist of key/value pairs. They are provided as separate arguments in key-pair, key-pair order. Any existing value for the key is replaced with the dictionary.

-dict-add

Like -dict, but the key/value pairs are appended to an existing dictionary.

-float

The value for a preference key is a floating point number.

-g, -globalDomain, NSGlobalDomain

Access the global system defaults in the Global Domain. Note that NSGlobalDomain is a domain name, not really an option.

-host hostname

Preference operations may be performed only on the host named hostname.

-int[eger]

The value for a preference key is an integer.

-string

The value for a preference key is a string.

Commands

deletedomain[key]

With a key, remove the given key from domain's defaults. Without key, remove all the information for domain.

domains

Print the names of all domains in the user's default system.

find string

Look for string in the user's domain names, keys, and values, and print a list of found matches.

help

Print a help message showing command formats.

read [domain[key]]

With no domain or key, read all of the current user's defaults, for every domain. With just a domain, read all of the current user's defaults for that domain. With both a domain and a key, read the current user's default for the given key in the given domain. In all cases, the retrieved data are printed to standard output.

read-type domain key

Print the property list type for the key key in the domain domain.

write domain key value

Store value as the value for the key key in the application domain domain. Quote value if it contains whitespace or shell metacharacters.

write domain proplist

Store the property list proplist as the defaults for the application domain domain. The proplist must be a property list representation of a dictionary, and must be quoted so that it is a single argument.

Name

developer

Synopsis

    /Developer/Tools/*

The /Developer/Tools directory contains a number of programs primarily for use by developers. The following three programs are useful for general users as well; see their manpages for more information:

CpMac

Copy files, keeping multiple resource forks and HFS attributes intact

MvMac

Move or rename files while preserving resource forks and HFS metadata

SplitForks

Copy the resource fork and HFS attributes from file into ._file.

The rest of the programs are:

agvtool

firewire

pbprojectdump

SetFile

BuildStrings

GetFileInfo

PPCExplain

uninstall-dev

cvs-unwrap

MergePef

ResMerger

UnRezWack

cvs-wrap

packagemaker

Rez

WSMakeStubs

DeRez

pbhelpindexer

RezWack

Name

ditto

Synopsis

    ditto [options] files directory
    ditto [options]directory1 directory2

Copies files and directories while preserving most file information, including resource fork and HFS metadata information when desired. ditto preserves the permissions, ownership, and timestamp of the source files in the copies. ditto overwrites identically named files in the target directory without prompting for confirmation.

ditto works like cp in the first synopsis form. However, the second form differs in that cp -r copies the entire directory1 into an existing directory2, while ditto copies the contents of directory1 into directory2, creating directory2 if it doesn't already exist.

Options

-arch arch

When copying fat binary files, copy only the code for CPU type arch. Fat binary files contain different code for different CPU architectures. The -arch flag allows you to "thin" the binary by copying only the code for the specified architecture. Possible values for arch include ppc, m68k, i386, hppa, and sparc.

-bom pathname

When copying a directory, include in the copy only those items listed in BOM (Bill of Materials) file pathname. See mkbom(8), lsbom(8), and bom(5) for more information on BOM files.

-c

Create a cpio archive at directory2.

--extattr

Preserve POSIX extended attributes. This is the default.

-h, --help

Print a usage message.

-k

Specify that archives are PKZip format.

--keepParent

Embed directory1's parent directory in directory2.

--nocache

Do not use the Mac OS X Unified Buffer Cache when copying files.

--noextattr

Do not preserve POSIX extended attributes. Use with --rsrc to copy only resource forks and HFS metadata, without copying other extended attributes.

--norsrc

When copying files, do not preserve any resource forks or HFS metadata information.

--rsrc

When copying files, do include any resource fork and HFS metadata information.

--sequesterRsrc

For PKZip archives, preserve resource forks and HFS metadata in the subdirectory _ _MACOSX. The resources will be found automatically when doing a PKZip extraction.

-v

Be verbose; report each directory copied.

-V

Be very verbose; report each file, symbolic link and device copied.

-x

Treat directory1 as a source archive and extract it. The assumed format is cpio, unless -k is used. Compressed cpio format is automatically recognized and handled.

-X

Don't descend into directories on another device.

-z

Create or read compressed cpio archives.

Example

Duplicate an entire home directory, copying the contents of /Users/arnold into the directory /Volumes/Bigdisk/Users/arnold and preserving resource forks and HFS metadata:

    ditto --rsrc /Users/arnold "/Volumes/Big Disk/Users/arnold"

Name

lam

Synopsis

    lam [options] file ...

Laminate files. Lines are read from the given files and pasted together side by side. In other words, line 1 of the output is the concatenation of line 1 from each input file, line 2 is the concatenation of line 2 from each input file, and so on. Use - to mean standard input.

Options

-f min . max

Use min as the minimum field width for the following file's lines, and max as the maximum field width. min may start with a zero, in which case padding is done with zeros. It may also start with a -, in which case the output is left-adjusted.

-F min . max

Like -f, but apply the field width specification to all following input files, until another -f is encountered.

-p min . max

Like -f, but pad this file's field in the output if end-of-file is encountered on it while the other files still have data.

-P min . max

Like -p, but apply the field width specification to all following input files, until another -p is encountered.

-s sep

Print sep after the following file's line, before the line from the next file. Normally, the lines are joined without any intervening separator.

-S sep

Like -S, but apply the separator specification to all following input files, until another -s is encountered.

-t char

Input lines are terminated by the character char, instead of newline.

-T char

Like -t, but apply the input line terminator specification to all following input files, until another -t is encountered.

Name

leave

Synopsis

    leave [[+]hhmm]

Remind you when you have to leave. The time given, hhmm, may be in 12 or 24-hour format. hh represents hours and mm represents minutes. The time is converted to the corresponding wall clock time in the upcoming 12 hours. leave prompts you to leave five minutes before, one minute before, and at the given time, and then every minute thereafter. With a leading +, the time is taken as an offset from the current time. With no argument, leave prompts you for a time; this is useful from a shell start-up file, such as ~/.profile or ~/.login. Logout, or kill it with kill in order to terminate it.

Name

mount

Synopsis

    mount [options] [[device] directory]

System administration command. Mount a filesystem. The filesystem on device is mounted on directory. If no device is specified, mount looks for an entry in /etc/fstab to find what device is associated with the given directory. The directory, which must already exist and should be empty, becomes the name of the root of the newly mounted filesystem. If mount is invoked with no arguments, it displays the name of each mounted device, the directory on which it is mounted, its filesystem type, and any mount options associated with the device. See also umount.

Note: despite the references in the Mac OS X mount(8) manpage to /etc/fstab, that file is not used. On Mac OS X 10.4, the file /etc/fstab.hd (note the slightly different name) has these contents:

    $ cat /etc/fstab.hd
    IGNORE THIS FILE.
    This file does nothing, contains no useful data, and might go away in future releases.
 Do not depend on this file or its contents.

Options

-a

Mount all filesystems that are available for mounting. Use -t to limit this to all filesystems of a particular type. Filesystems marked noauto are not mounted.

-d

Debugging; does everything but actually make the system call. Useful with -v.

-f

Force removal of write status; used for changing a mount from read-write to read-only.

-o option

Qualify the mount with a mount option. Filesystem specific options may be passed as a comma-separated list in the argument to -o, and different filesystems may have additional options. The following general options are available:

auto, noauto

Filesystems marked auto are mounted automatically with the -a option. Those marked noauto are not.

async, noasync

The async option uses asynchronous I/O to the device. This can improve throughput at a potential cost in reliability. noasync disables this.

dev, nodev

The dev option allows the system to interpret any special devices that exist on the filesystem as device files. The nodev option disallows it; device files are ignored.

exec, noexec

The exec option allows the system to execute binary files on the filesystem. The noexec option disallows it.

force

Identical to -f, removes write access from a mount.

nosuid

Do not acknowledge any setuid or setgid bits.

rdonly

Same as -r; the filesystem is mounted read-only.

sync

All I/O is done synchronously.

union

Merge the mounted filesystem's root and the contents of the directory upon which its mounted. Lookup operations are done in the mounted filesystem first, and then in the underlying directory. New files are created in the mounted filesystem.

update

Same as -u, changes the status of an already mounted filesystem.

-r

Mount the filesystem read-only.

-t type

Specify the filesystem type. Possible values include afp, autofs, cd9660, cddafs, devfs, fdesc, ftp, hfs, ldf, msdos, nfs, ntfs, smbfs, synthfs, udf, ufs, volfs, and webdav. The default type is ufs. Use a comma-separated list to specify more than one type to mount, and prefix a type with no to exclude that type.

-u

Update (change) the status of an already mounted filesystem. E.g., from read-only to read-write.

-v

Display mount information verbosely.

-w

Mount filesystem read/write. This is the default.

Name

nano

Synopsis

    nano [+line] [options] [file]

Replacement program for the non-free Pico editor supplied with the Pine email reader. Mac OS X provides pico as a symbolic link to nano.

URL: http://www.nano-editor.org/.

Options

The options -a, -b, -e, -f, -g, and -j are accepted but ignored for compatibility with pico.

+ line

Go to line number line at startup.

-B, --backup

Upon saving a file, keep the previous version in a file with the same name and a ~ character at the end.

-c, --const

Always (constantly) show the cursor position.

-D, --dos

Write files in MS-DOS format (CR-LF line terminators).

-F, --multibuffer

Use multiple file buffers.

-h, --help

Print a command-line option summary.

-H, --historylog

If support for startup files is configured, log search and replace stings in ~/.nano_history.

-i, --autoindent

Enable auto-indentation. Useful for source code.

-I, --ignorercfiles

If support for startup files is configured, do not read the $SYSCONFDIR/nanorc or ~/.nanorc files.

-k, --cut

Enable cut from cursor to end of line with ^K.

-K, --keypad

Use the ncurses keypad() function only if necessary. Try this option if the arrow keys on the numeric keypad do not work for you.

-l, --nofollow

If editing a symbolic link, replace the link with a regular file, instead of following the link.

-m, --mouse

Enable mouse support.

-M --mac

Write files in Macintosh (presumably Mac OS 9) format (CR line terminators).

-N --noconvert

Disable the automatic conversion of files from MS-DOS or Macintosh formats.

-odir, --operatingdir=dir

Use dir as the operating directory. The manual page says "Makes nano set up something similar to a chroot."

-p, --preserve

Allow the terminal to use XON and XOFF (^Q and ^S).

-Qstr, --quote=str

Use str as the quoting string for justifying. If regular expression support is available, the default is "^([ \t]*[|>:}#])+"; otherwise, it's "> ".

-rcols, --fill=cols

Upon reaching column cols, wrap the line.

-R, --regexp

If regular expression support is available, enable regular expression matching for all search strings, and the use of \ n in replacement strings. (See Chapter 7.)

-sprog, --speller=prog

Use prog to check spelling.

-S, --smooth

Enable smooth, line-by-line scrolling.

-t, --tempfile

Always save the changed buffer without prompting for confirmation.

-Tnum, --tabsize=num

Set the width of a tab to num characters.

-v, --view

View the file. (Read-only mode.)

-V, --version

Show the version number and author.

-w, --nowrap

Don't wrap long lines.

-x, --nohelp

Disable the help screen at the bottom of the editor.

-Yname, --syntax=name

Use name as the kind of syntax highlighting to use.

-z, --suspend

Enable suspension of the editor.

Name

open-x11

Synopsis

    open-x11 program ...

Run program so that it can connect to the current X server. Needed for X11 applications under Mac OS X , since Aqua is not an X server.

Name

pbcopy

Synopsis

    pbcopy [-help] [-pboard pasteboard]

Copy standard input into one of the system pasteboards. The general pasteboard is used by default. The data are stored as ASCII, unless they begin with an EPS (encapsulated PostScript) or RTF (Rich Text Format) header, in which case those formats are used. See also pbpaste.

Options

-help

Print a help message.

-pboard pasteboard

Use the pasteboard pasteboard. Possible values are general, ruler, find, or font.

Name

pbpaste

Synopsis

    pbpaste [-help] [-pboard pasteboard] [-Prefer type]

Retrieve the data from the given pasteboard and print them to standard output. The general pasteboard is used by default. See also pbcopy.

Options

-help

Print a help message.

-pboard pasteboard

Use the pasteboard pasteboard. Possible values are general, ruler, find, or font.

-Prefer type

Try to retrieve data of the given type first. Possible values are ascii, rtf, or ps. If data of the given type are not found, pbpaste retrieves whatever data are there.

Name

pico

Synopsis

    pico [+line] [options] [file]

Small simple editor. This is actually the "Nano" Free Software editor. See nano for more information.

Name

ps

Synopsis

    ps [options]

Report on active processes. Following the BSD tradition, a minus sign is allowed but not required in front of options. In options, list arguments should either be separated by commas or put in double quotes.

Options

-a

List other users' processes, as well as your own.

-A

List other users' processes, including those without a controlling terminal.

-c

In the command column, print just the command name, instead of the full command line.

-C

Use a different algorithm for calculating CPU percentage which ignores resident time.

-e

Include environment information after the command.

-h

Print a header on each page of output.

-j

Jobs format. Print the information for the command, jobc, pgid, pid, ppid, sess, state, time tt, and user keywords.

-l

Produce a long listing. Print the information for the command, cpu, nice, pid, ppid, pri, rss, state, time tt, uid, vsz, and wchan keywords.

-L

Print list of keywords (field specifiers) that can be used for output formatting or for sorting.

-m

Sort by memory usage, not by process ID.

-M

Show threads.

-N, --deselect

Negate the selection.

-o list

Like -O, but use only the keywords in list.

-O list

Append the keywords in list after the PID. The title of each keyword may be changed by using an = sign after the keyword (keyword = newtitle).

-p nums

Include only specified processes, which are given in a space-delimited list.

-r

Sort by CPU usage instead of by process ID number.

-S

Include dead child process data in parent's total.

-t ttys

Display processes running on the specified terminals.

-T

List information about processes using the current standard input.

-u

Give information for the keywords command, %cpu, %mem, pid, rss, start, state, time tt, user, and vsz. This option implies -r.

-U user

Display processes for the specified user.

-v

Display virtual memory format. This includes the keywords command, %cpu, lim, %mem, pagein, pid, re, rss, sl, state, time, tsiz, and vsz. This option implies -m.

-w

Wide format. By default, use 132 columns. Repeating this option causes ps to never truncate lines.

-x

Display processes without an associated controlling terminal.

Keywords

Aliases for keywords are listed second, next to the keyword.

%cpu, pcpu

Percentage of CPU used.

%mem, pmem

Percentage of memory used.

acflag, acflg

Accounting flag.

command

Command and arguments.

cpu

Short-term factor of CPU used.

flags, f

Hexadecimal representation of process flags.

inblk, inblock

Total amount of blocks read.

jobc

Count for job control.

ktrace

Tracing flags.

ktracep

Tracing vnode.

lim

Limit of memory usage.

logname

Username of the user that started the command.

lstart

Start time.

majflt

Page fault totals.

minflt

Page reclaim totals.

msgrcv

Messages received total.

msgsnd

Messages sent total.

nice, ni

Nice value.

nivcsw

Involuntary context switches total.

nsigs, nsignals

Signals taken total.

nswap

Swaps in/out total.

nvcsw

Voluntary context switches total.

nwchan

Wait channel (as number).

oublk, oublock

Blocks written total.

p_ru

Resource usage (valid only for zombie).

paddr

Swap address.

pagein

Pageins (same as majflt).

pgid

Process group number.

pid

Process ID number.

poip

Number of pageouts in progress.

ppid

Parent process ID.

pri

Scheduling priority.

re

Core residency time.

rgid

Real GID.

rlink

Reverse link on run queue.

rss

Resident set size.

rsz, rssize

Resident set size + (text size/text use count).

rtprio

Realtime priority (101 = not a realtime process).

ruid

Real UID.

ruser

Username (from ruid).

sess

Session pointer.

sig, pending

Signals that are pending.

sigcatch, caught

Signals that have been caught.

sigignore, ignored

Signals that are ignored.

sigmask, blocked

Signals that are blocked.

sl

Sleep time.

start

Start time.

state, stat

Symbolic process state.

svgid

Saved GID from a setgid executable.

svuid

Saved UID from a setuid executable.

tdev

Device number of the controlling terminal.

time, cputime

Total of user and system CPU time.

tpgid

Process group ID of the controlling terminal.

tsess

Session pointer for the controlling terminal.

tsiz

Text size (in kilobytes).

tt

Name of controlling terminal.

tty

Controlling terminal's full name.

uprocp

Process pointer.

ucomm

Command name used for accounting.

uid

Effective UID.

upr, usrpri

Scheduling priority after a system call has been made.

user

Username (from uid).

vsz, vsize

Virtual size (in kilobytes).

wchan

Wait channel (as symbolic name).

xstat

Exit or stop status (only for stopped or zombie processes).

Name

pstopdf

Synopsis

    pstopdf [inputfile] [-o outfile] [options]

Convert a PostScript input file to a PDF file. The PDF file is always written to a file, whose name is either derived from the input filename, or which must be supplied via -o if the input data is read from standard input.

Options

-i

Read PostScript from standard input instead of from inputfile.

-l

Write messages to a log file instead of to standard output. The log file name is the same as the output filename, with a .log extension added to it.

-p

Print a progress message at the end of each page. The messages always go to standard output, even with -l.

-o file

Place the output in file. By default, for an input PostScript file whizprogdoc.ps, the PDF file will be named whizprogdoc.pdf.

Name

pythonw

Synopsis

    pythonw python-args ...

Run a python program that has a GUI (Graphical User Interface).

URL: http://www.python.org.

Name

say

Synopsis

    say [options] string | -ffile

Text to speech synthesizer. The text is converted to sound and played through the system's speakers, or saved to a file.

Options

-f file

Read the text in file.

-o file .aiff

Save the sound in the given output file.

-v voice

Use the given voice for producing speech. Both masculine and feminine voices are available. The default voice is selected in the System Preferences.

Example

Add voice prompts to your shell scripts with the following shell function:

    prompt () {
        say "$*" &                 Play prompt in background
        echo -n "$*"": "           Traditional shell prompting
    }

Name

shar

Synopsis

    shar file ...

Produce a Shell archive. The output is a shell script, which when run with a Bourne-compatible shell, will extract the original files and directories. It is useful for distributing files via electronic mail or ftp. All directories should be named on the command line before regular files so that they will be re-created correctly.

Tip

This version of shar is very simple. It cannot handle binary data files, and may not be robust in the face of unusual filenames either.

Name

shlock

Synopsis

    shlock -f lockfile [-p PID] [-u] [-v]

Create or verify a lockfile that can be used from shell scripts . shlock uses the rename(2) system call for making the final lock file; its operation is atomic.

When creating a lock, use -p to place the process ID into the file, so that a later invocation can verify the existence of the original creating process.

When verifying a lock, do not use the -p option. shlock then uses the kill command to verify that the process recorded in the file is still alive. If not, shlock exits with a value of 1.

Options

-f lockfile

Use lockfile as the name of the file to create or check. This option must be provided.

-p PID

Write PID into lockfile.

-u

UUCP-compatible locking. shlock writes the pid number as a binary value.

-v

Be verbose.

Example

Create and use a lock file:

    lockf=/tmp/whizprog.lock

    if shlock -f $lockf -p $$
    then
        do whatever is needed with the file locked
        rm -f $lockf
    else
        echo "$0: Process ID $(cat $lockf) holds the lock" 1>&2
        exit 1
    fi

Name

srm

Synopsis

    srm [options] file ...

Securely remove files. srm overwrites the data in each file before unlinking it. This prevents recovery of file data by examination of the raw disk blocks. The options are purposely similar to those of the standard rm command.

URL: http://srm.sourceforge.net.

Options

-d, --directory

Ignored. For compatibility with rm.

-f, --force

Ignore nonexistent files. This prevents srm from prompting.

--help

Display an option summary and then exit.

-i, --interactive

Interactive. Prompt before removing files.

-m, --medium

Use seven US DOD compliant passes (0xF6, 0x00, 0xFF, random, 0x00, 0xFF, and random).

-n, --nounlink

Overwrite the file, but do not unlink or rename it.

-r, -R, --recursive

Recursively remove the contents of directories.

-s, --simple

Overwrite files with just a single pass of random data.

-v, --verbose

Be verbose.

--version

Print version information and then exit.

-z, --zero

Zero the blocks used by the file after overwriting them.

Name

umount

Synopsis

    umount [-fv] device | remotespec
    umount -a|-A [-fv] [-h host] [-t type]

System administration command. Unmount a mounted filesystem. device is a device name or other string indicating what is mounted. A remotespec is a string of the form host : directory indicating a remote host and filesystem (typically mounted via NFS). See also mount.

Options

-a

Unmount all filesystems listed in /etc/fstab or Open Directory. (See mount for information about Mac OS X and /etc/fstab.)

-A

Unmount all currently mounted filesystems, except for the root filesystem (mounted at /).

-f

Force the unmount. Open device files continue to work. Other file accesses fail.

-h host

Unmount all filesystems from the server host.

-t type

Unmount filesystems of only the specified type.

-v

Be verbose.

Alphabetical Summary of Java Commands

Name

appletviewer

Synopsis

    appletviewer [options]urls

Connect to the specified urls and run any Java applets they specify in their own windows, outside the context of a web browser.

Options

-debug

Run the applet viewer from within the Java debugger, jdb.

-encoding name

Specify the input HTML file encoding.

-J java-option

Pass java-option on to the java program. Useful for changing the execution environment or memory usage. java-option should not contain spaces; use multiple -J options if necessary.

Name

apt

Synopsis

    apt [options] [files ...] [@file ...]

Annotation processing tool. The apt command uses reflective APIs from com.sun.mirror to annotate source code in order to provide a view of a program's structure. The APIs model the Java language's type structure, including generics.

Operands

files

Zero or more Java source files.

@ file

One or more files listing the names of Java source files, or other options.

Options

-A[key[=val]]

Options passed on to specific annotation processes, not interpreted directly by apt itself.

-cppath, -classpathpath

Look in path for class files and annotation processor factories. With -factorypath, the classpath is not searched for factories.

-d dir

Place processor and compiled class files in dir.

-factory classname

Use classname as the annotation process factory. This bypasses apt's default discovery process.

-factorypath path

Find annotation processor factories in path. This option disables searching the classpath for factories.

-nocompile

Disable compilation of source files into class files.

-print

Print a textual version of the types; do not do any annotation processing or compilation.

-s dir

Use dir as the root directory in which to place generated source files. Files are placed in subdirectories based on the package namespace.

Name

jar

Synopsis

    jar [options] [manifest]dest files

Java archive tool. All the named objects and directory trees (if directories are given) are combined into a single Java archive, presumably for downloading. jar is based on the ZIP and ZLIB compression formats; zip and unzip can process .jar files with no trouble. If a manifest is not provided, jar creates one automatically. The manifest becomes the first entry in the archive, and it contains any needed metadata about the archive.

Usage is similar to tar, in that the leading - may be omitted from the options. jar is an excellent tool for creating and for opening ZIP format files; its usage is much more intuitive for the long-time Unix user already familiar with tar.

Options

-0

Do not use ZIP compression when creating the archive.

-c

Create a new or empty archive to standard output.

-C directory

Change to directory before processing the filenames that follow. Multiple -C options are allowed.

-f

The second argument, dest, is the archive to process.

-i

Create index information for the .jar file and the ones it depends upon. Include a file named INDEX.LIST in the archive which lists location information for each package in the .jar file and all the .jar files in the Class-Path attribute of the file.

-J java-option

Pass java-option on to the java program. Useful for changing the execution environment or memory usage. java-option should not contain spaces; use multiple -J options if necessary.

-m

Use specified manifest instead of creating a manifest file.

-M

Don't create a manifest file.

-o

Don't compress the files with ZIP compression.

-t

Print a table of contents for the archive on standard output.

-u

Update an existing .jar file by adding to it the files and directories specified on the command line.

-v

Produce verbose output to standard error.

-x[file]

Extract named file, or all files if no file given.

Name

jarsigner

Synopsis

    jarsigner [options] jarfile alias
    jarsigner -verify [options]jarfile

Sign or verify .jar files. Adding a digital signature to a .jar file improves its security, since changing the contents causes the signature to become invalid. jarfile is the original file to be signed; alias is a recognized alias for the identity of the signer. By default jarsigner replaces the original file with the signed one. This can be changed with the -signedjar option.

The generated signed .jar file is identical to the input one, with the addition of two new files: a .SF signature file and a .DSA signature block file. The default names of these files are taken from the first eight characters of alias, but this may be overridden with the -sigfile option.

The -keypass, -keystore, -sigfile, -signedjar, and -storepass options are only for signing a file.

Whenever jarsigner accepts a password for an option, if not provided on the command line, the program prompts for a password. Such options should not be used in scripts or on the command line, since they make passwords visible. Similarly, jarsigner does not turn off echoing when prompting for a password, so make sure no one else can see your screen when using such options! See also keytool.

Options

-certs

Together with -verify and -verbose, provide certificate information for each signer of the .jar file.

-internalsf

Revert to earlier behavior, whereby the .DSA file also contains a copy of the .SF file. Useful mainly for testing.

-J java-option

Pass java-option on to the java program. Useful for changing the execution environment or memory usage. java-option should not contain spaces; use multiple -J options if necessary.

-keypass password

Use password to protect alias's private key in the keystore. This password must be used when signing a .jar file.

-keystorefile | url

Provide the location of the keystore (database file) holding the signer's keys. The default is the .keystore file in the user's home directory, as specified by the user.home system property. This defaults to the user's home directory. The location may be specified as either a filename or a URL.

-provider class_name

Use class_name as the master class file for the cryptographic service provider when such is not listed in the security properties file.

-sectionsonly

Prevent jarsigner from including a header in the .SF file with a hash of the entire manifest file. This prevents a useful optimization, and should only be used for testing.

-sigfile name

Use name as the base part of the filename for the signature and signature block files added to the .jar file.

-signedjar file

Use file as the signed file.

-storepass password

Use password as the password to access the keystore.

-storetype type

Use type as the type of keystore to instantiate.

-verbose

Provide extra information about progress during signing or about the verification.

-verify

Verify a .jar file instead of signing one. jarsigner can also verify a file signed with the JDK 1.1 javakey program.

Examples

Sign a .jar file by multiple users:

    jp$ jarsigner whizprog.jar jp
                     User jp signs it
    boss$ jarsigner whizprog.jar bossUser boss signs it

Verify the signatures:

    customer$ jarsigner -verify whizprog.jar
                     Customer checks it out
    jar verified

Name

java

Synopsis

    java [options] classname [args]
    java [options] -jar jarfile [args]

Load and execute Java bytecode class files. By default, java uses the "Just In Time" ( JIT) compiler for the current system. args are passed on to the Java program's main() method.

Options

-agentlib:lib[=options]

Load the native agent library lib, optionally passing options to it.

-agentpath:path[=options]

Use path to load a native agent library by full path.

-client

Use the Java HotSpot Client VM.

-cppath, -classpathpath

Use the colon-separated list of directories in path instead of $CLASSPATH to find class files. It is usually a good idea to have the current directory (".") on the search path.

-d32, -d64

Specify a 32- or 64-bit environment, respectively. On 64-bit systems, 64 bits is the default. Otherwise, the 32-bit environment is used.

-dsa, -disablesystemassertions

Disable assertions in all system classes.

-D prop = val

Redefine the value of prop to be val. This option may be used any number of times.

-esa, -enablesystemassertions

Enable assertions in all system classes.

-jar jarfile

Invoke the main() method of the class listed in the Main-Class manifest header in jarfile.

-javaagent:jarpath[=options]

Use jarpath to load a Java agent.

-server

Use the Java HotSpot Server VM.

-showversion

Display version information and continue running.

-verbose[:item]

With item, display information about that item. Possible values for item are class, to print a message to standard output each time a class file is loaded; gc, to report each garbage collection event; and jni, for information about native methods. Plain -verbose is the same as -verbose:class.

-version

Display version information for java.

-X

Print information about nonstandard options, such as for debugging, control of garbage collection, interpreted mode only, and so on. The Solaris java(1) manpage says: "The -X options are nonstandard and subject to change without notice."

-?, -help

Print a usage message.

Name

javac

Synopsis

    javac [options]files

Compile Java source code into Java bytecode, for execution with java. Java source files must have a .java suffix and must be named for the class whose code they contain. The generated bytecode files have a .class suffix. By default, class files are created in the same directory as the corresponding source files. Use the CLASSPATH variable to list directories and/or ZIP files that javac will search to find your classes.

In the case that there are too many files to list on the command line, you may list the source and class files in a separate file, and indicate the contents of the file to javac by prepending an @ to the filename.

Options

-bootclasspath path

Use the colon-separated list of directories in path for the boot classes, instead of the boot classes used by the java command itself.

-classpath path

Use the colon-separated list of directories in path instead of $CLASSPATH to find class files. It is usually a good idea to have the current directory (".") on the search path.

-cldc1.0

For compiling CLDC programs. This causes the compiler to generate stack maps, which obviates the need for the preverifier.

-d dir

Specify where to create generated class files.

-deprecation

Warn about every use or override of a deprecated member or class, instead of warning at the end.

-Djava.ext.dirs= dirs

Use dirs as the location for installed extensions.

-Djava.endorsed.dirs= dirs

Use dirs as the endorsed standards path.

-encoding encoding

The source file is encoded using encoding. Without this option, the system's default converter is used.

-extdirs dirs

For cross-compilation, use the specified dirs as the extension directories.

-g

Generate all debugging information, including local variables.

-g: type

Generate only the debugging information specified by type. Possible values are:

lines

Line number debugging information.

none

No debugging information.

source

Source file debugging information.

vars

Local variable debugging information.

-help

Print a usage message.

-J java-option

Pass java-option on to the java program. Useful for changing the execution environment or memory usage. java-option should not contain spaces; use multiple -J options if necessary.

-nowarn

Disable all warnings.

-O

Perform optimizations that may produce faster but larger class files. It may also slow down compilation. This option should be used with discretion.

-source version

Accept Java language source as specified by version. Acceptable values are 1.5 and 5 for JDK 1.5 features, such as generics, 1.4 for JDK 1.4 features (assertions), or 1.3 for only JDK 1.3 language features.

-sourcepath path

Use path to search for class and interface definitions. Classes found through the classpath may be recompiled if their source files are found.

-target version

Compile for the JVM matching version. Values for version are 1.1, 1.2, 1.3, 1.4, 1.5, and 5 (a synonym for 1.5). The default is 1.2, although -source 1.4 or lower changes the default JVM to 1.4.

-verbose

Print messages as files are compiled and loaded.

-X

Print information about nonstandard options and exit.

Name

javadoc

Synopsis

    javadoc [options] files |classes

Process declaration and documentation comments in Java source files and produce HTML pages describing the public and protected classes, interfaces, constructors, methods, and fields.

In the case that there are too many files to list on the command line, you may list the source and class files in a separate file, and indicate the contents of the file to javadoc by prepending an @ to the filename.

javadoc uses "doclets" to format the source code. You can supply your own doclet with the -doclet option. The standard doclet produces HTML. The following section lists the union of the javadoc options and those of the standard doclet.

Options

Options are case-insensitive, although option arguments may not be.

-1.1

Create documentation matching that of javadoc 1.1. No longer available; use javadoc 1.2 or 1.3 if you need it.

-author

Include @author tags.

-bootclasspath path

Use the colon-separated list of directories in path for the boot classes, instead of the boot classes used by the java command itself.

-bottom text

Place text at the bottom of each output file. text may contain HTML tags and whitespace, but must be quoted if it does.

-breakiterator

Use internationalized sentence boundary of java.text.BreakIterator for English for the first sentence, which is copied to the index. The default is to use a locale-specific algorithm for English.

-charset charset

Use charset as the HTML character set for the document.

-classpath path

Use the colon-separated list of directories in path instead of $CLASSPATH to find class files. It is usually a good idea to have the current directory (".") on the search path. It is better to use -sourcepath instead of -classpath.

-d dir

Create the generated HTML files in dir.

-docencoding encoding

Use encoding for the generated HTML file.

-docfilessubdirs

Enable deep copying of directories for document files.

-doclet class

Use class as the doclet to produce documentation.

-docletpath pathlist

Use pathlist to find the doclet class file(s).

-doctitle title

Use title as the title of the document, which is placed near the top of the overview summary file.

-encoding encoding

The Java source file is encoded using encoding.

-exclude packages

Unconditionally exclude packages, even if they would otherwise be included.

-excludedocfilessubdir names

Exclude the subdirectories names. Useful to avoid copying source code control directories.

-extdirs directories

Search for extensions in directories.

-footer text

Place text at the bottom of each output file.

-group groupheading package-list

Group the packages in package-list into a group labeled groupheading. Each group gets its own table on the overview page.

-header text

Place text at the top of each output file.

-help

Print a short help message.

-helpfile file

Use file as the help file, instead of the automatically-generated helpdoc.html file.

-J java-option

Pass java-option on to the java program. Useful for changing the execution environment or memory usage. java-option should not contain spaces; use multiple -J options if necessary.

-keywords

Place HTML meta keyword tags into the file.

-link URL

Add a link to the javadoc-generated document specified by URL. It must specify a directory, not a file, and may be either a relative or absolute URL.

-linkoffline URL packagelistfile

Use instead of -link when javadoc is not able to access the URL over the Web. The list of packages is provided in packagelistfile, which is usually a local file.

-linksource

Create an HTML version of the source code that is linked-to by the HTML documentation.

-locale locale-spec

Generate documentation using the language described by locale-spec. This option must come before any options provided by any doclet, or else all the navigation bars will be in English.

-nocomment

Suppress the comment body, generating only declarations.

-nodeprecated

Exclude paragraphs marked with @deprecated.

-nodeprecatedlist

Do not generate the deprecated-list.html file or the link to it from the navigation bar. Useful if you use no deprecated APIs to make the documentation cleaner.

-nohelp

Do not generate the HELP link.

-noindex

Do not generate the package index.

-nonavbar

Do not generate the navigation bar, header, or footer. Useful if all you need is the documentation itself.

-noqualifierall | package-list

Omit package qualifiers from the packages in package-list, or from all packages if all is used.

-nosince

Do not generate the "since" sections from @since tags.

-notimestamp

Suppress the hidden timestamp in each file. Useful for comparing two versions of the documentation.

-notree

Do not generate the class and interface hierarchy.

-overview file

Use file for the overview documentation in the overview page, overview-summary.html.

-package

Include only package, protected, and public classes and members.

-private

Include all classes and members.

-protected

Include only protected and public classes and members. This is the default.

-public

Include only public classes and members.

-quiet

Do not include the version number of the standard doclet in the generated output.

-serialwarn

Warn about missing @serial tags.

-sourcepath path

Use path as the search path for class source files. path is a colon-separated list of directories. If not specified, it defaults to the current -classpath directory. Running javadoc in the directory with the sources allows you to omit this option.

-splitindex

Split the index into multiple files, one per letter of the alphabet.

-stylesheetfile file

Use file as the HTML stylesheet file. The default is to create a stylesheet file, stylesheet.css.

-subpackages package-list

Document the packages and recursively their subpackages for the packages listed in package-list.

-tag tagname : placement : text

Inform javadoc about a custom tag named tagname. text is the text placed into the documentation in bold. placement describes where to use the tag, as follows:

a

Use the tag in all places.

c

Use the tag for constructors.

f

Use the tag for fields.

m

Use the tag for methods.

o

Use the tag in overviews.

p

Use the tag in packages.

t

Use the tag for types (classes and interfaces).

X

Tag is disabled, don't generate it.

-taglet class

Use class as the taglet for generating custom output. The taglet is used for tags specified after it with the -tag option.

-tagletpath path

Search path to find taglets.

-title

This option no longer exists; use -doctitle.

-use

Create a "Use" page for each class, listing the classes that use the page's class.

-verbose

Print additional messages about time spent parsing source files.

-version

Include @version tags.

-windowtitle title

Place title in the HTML <title> tag.

Name

javah

Synopsis

    javah [options] classes |files

Generate C header and/or source files for implementing native methods. The generated .h file defines a structure whose members parallel those of the corresponding Java class.

The header filename is derived from the corresponding Java class. If the class is inside a package, the package name is prepended to the filename and the structure name, separated by an underscore.

Note: the Java Native Interface (JNI) does not require header or stub files. Use the -jni option to create function prototypes for JNI native methods.

Options

-bootclasspath path

Use the colon-separated list of directories in path for the boot classes, instead of the boot classes used by the java command itself.

-classpath path

Use the colon-separated list of directories in path instead of $CLASSPATH to find class files. It is usually a good idea to have the current directory (".") on the search path.

-d dir

Place generated files in dir.

-force

Always write output files.

-help

Print a help message.

-J java-option

Pass java-option on to the java program. Useful for changing the execution environment or memory usage. java-option should not contain spaces; use multiple -J options if necessary.

-jni

Produce JNI native method function prototypes.

-o file

Concatenate all generated header or source files for all the classes and write them to file.

-old

Produce JDK 1.0-style headers.

-stubs

Generate C declarations, not headers.

-trace

Add tracing information to the generated stubs.

-verbose

Verbose.

-version

Print the version of javah.

Name

javap

Synopsis

    javap [options]classfiles

Disassemble Java class files and print the results. By default, javap prints the public fields and methods of the named classes.

Options

-b

Ignored. For backward compatibility with the JDK 1.1 javap.

-bootclasspath path

Use the colon-separated list of directories in path for the boot classes, instead of the boot classes used by the java command itself.

-c

Print out the disassembled byte-codes for each method in the given classes.

-classpath path

Use the colon-separated list of directories in path instead of $CLASSPATH to find class files. It is usually a good idea to have the current directory (".") on the search path.

-extdirs dirs

For cross-compilation, use the specified dirs as the extension directories.

-h

Generate code that can be used in a C header file.

-help

Print a usage message.

-J java-option

Pass java-option on to the java program. Useful for changing the execution environment or memory usage. java-option should not contain spaces; use multiple -J options if necessary.

-l

Display line number and local variable information.

-package

Only disassemble package, protected, and public classes and members. This is the default.

-private

Disassemble all classes and members.

-protected

Only disassemble protected and public classes and members.

-public

Only disassemble public classes and members.

-s

Display the internal type signatures.

-verbose

For each method, print the stack size, number of arguments, and number of local variables.

Name

jdb

Synopsis

    jdb [options] [class] [args]

jdb is the Java Debugger. It is a line-oriented debugger, similar to traditional Unix debuggers, providing inspection and debugging of local or remote Java interpreters.

jdb can be used in place of java, in which case the program to be run is already started in the debugger. Or, it may be used to attach to an already running java session. In the latter case, java must have been started with the option -agentlib:jdwp=transport=dt_socket,server=y,suspend=n,address=PORT. You then attach to the running JVM with jdb -attachPORT, where PORT is the same numeric port number used to run java.

Options

jdb forwards the -v, -D, -classpath, and -X options to the JVM running the program to be debugged. See java.

-attach address

Attach to an already running JVM at port address.

-connectconnector:name=value...

Connect to the JVM using the specified connector.

-J java-option

Pass java-option on to the java program. Useful for changing the execution environment or memory usage. java-option should not contain spaces; use multiple -J options if necessary.

-launch

Start the application immediately, stopping before the initial application class is loaded. This saves having to use the run command from within jdb.

-listconnectors

List the connectors available in this JVM.

-listen address

Wait for a JVM to connect to the debugger at address.

-listenany

Wait for a JVM to connect to the debugger at any address.

-sourcepath path

Use path to search for class and interface definitions.

-tclient

Use the HotSpot Client Performance Engine to run the application.

-tserver

Use the HotSpot Server Performance Engine to run the application.

Name

keytool

Synopsis

    keytool [subcommands]

Key and certificate management utility. Together with jarsigner, replaces the JDK 1.1 javakey utility. Keys and certificates are maintained in a keystore. keytool manages the keystore, and jarsigner uses the information in it for signing .jar files. If you need to work with keys and keystores, read the keytool(1) manpage carefully first!

The command-line arguments to keytool are subcommands, each of which begins with a hyphen. Each subcommand, in turn, accepts suboptions.

Whenever keytool accepts a password for an option, if a password is not provided on the command line, the program prompts for one. Such options should not be used in scripts or on the command line, since they allow passwords to be seen. Similarly, keytool does not turn off echoing when prompting for a password, so make sure no one else can see your screen when using such options! See also jarsigner.

Subcommands

-certreq suboptions

Generate a Certificate Signing Request.

-delete suboptions

Delete the entry for the alias given with -alias from the keystore. With no -alias option, prompt for the alias name.

-export suboptions

From the keystore, export the certificate belonging to the user specified with -alias, storing it in the file specified with -file.

-genkey suboptions

Add a new public/private key pair to the keystore.

-help

Print a command usage summary.

-identitydb suboptions

Import information from the JDK 1.1 style identity database specified with -file. If no such option is used, read from standard input. Create the keystore if it doesn't exist.

-import suboptions

Import a certificate or certificate chain from the file specified by the -file suboption. The certificates must be in either binary encoding or in RFC 1421 Base64 printable encoding.

-keyclone suboptions

Create a new keystore entry with the same private key and certificate chain as the original. Specify the source with -alias and the new password for the copy with -new.

-keypasswd suboptions

Change the password protecting a private key. Specify whose key with -alias, the original password with -keypass, and the new one with -new.

-list suboptions

Print the contents of the keystore for the user specified with -alias to standard output. With no -alias, print the entire keystore.

-printcert suboptions

Read a certificate from the file specified with -file or from standard input and print the contents in a human-readable format. The original certificate may be binary-encoded or RFC 1421 encoded.

-selfcert suboptions

Generate an X.509 v1 self-signed certificate. Use -alias to provide the alias of the user signing the certificate. Use -dname to provide an X.500 Distinguished Name if you don't wish to use the Distinguished Name associated with the user's alias.

-storepasswd suboptions

Change the password that protects the entire keystore. Use -new to provide the new password, which must be at least six characters long.

Suboptions for Subcommands

Following is the list of suboptions and their meanings. The entry for each suboption lists the subcommands with which it may be used.

-alias name

Use name as the user or alias name in order to specify which key pair and/or certificates to use. May be used with: -certreq, -delete, -export, -genkey, -import, -keyclone, -keypasswd, and -selfcert.

-dest alias

Use alias as the new user alias. May be used with: -keyclone.

-dname name

Use name as the X.500 Distinguished Name. May be used with: -genkey and -selfcert.

-file filename

Use filename as the source or sink of data, depending on the subcommand in use. May be used with: -certreq, -export, -import, and -printcert.

-keyalg algorithm

Use algorithm for producing keys. May be used with: -genkey.

-keypass password

Use password as the password for the given private key. Used with: -certreq, -genkey, -import, -keyclone, -keypasswd, and -selfcert.

-keysize size

Use size as the size in bits of the key. For DSA key pairs, size must be in the range from 512 to 1024, and it must be a multiple of 64. May be used with: -genkey.

-keystore filename

Use filename as the keystore. May be used with: -certreq, -delete, -export, -genkey, -import, -keyclone, -keypasswd, -list, -selfcert, and -storepasswd.

-new newpasswd

Use newpasswd as new password. May be used with: -keyclone, -keypasswd, and -storepasswd.

-noprompt

Do not interact with the user. May be used with: -import.

-provider provider_class

Use provider_class as the name of the cryptographic service provider's master class file if the security properties file does not list a service provider. May be used with: -certreq, -delete, -export, -genkey, -import, -keyclone, -keypasswd, -list, -selfcert, and -storepasswd.

-rfc

Use the RFC 1421 (Base64) printable encoding for output. May be used with: -export and -list.

-sigalg algorithm

Use algorithm for producing signatures. Used with: -certreq, -genkey, and -selfcert.

-storepass password

Use password as the password that protects the entire keystore. Must be at least six characters long and must be provided for all commands that access the keystore's contents. If this password isn't provided on the command line, the user is prompted for it. May be used with: -certreq, -delete, -export, -genkey, -import, -keyclone, -keypasswd, -list, -selfcert, and -storepasswd.

-storetype type

Use type as the type of the keystore. This an esoteric option; see the manpage for more details. May be used with: -certreq, -delete, -export, -genkey, -import, -keyclone, -keypasswd, -list, -selfcert, and -storepasswd.

-trustcacerts

Use certificates in the "cacerts" (Certificate Authority certificates) file, in addition to those in the keystore. May be used with: -import.

-validity days

Signature is valid for days days. May be used with: -genkey and -selfcert.

The following table shows default values for several of the most frequently used suboptions.

Suboption

Purpose

Default value

-alias

User name

mykey

-file

Data source / sink

Standard input if reading, standard output if writing

-keyalg

Signature Algorithm

DSA

-keysize

Encryption key size

1024

-keystore

Location of keystore

$HOME/.keystore

-validity

Days signature is valid for

90

Name

rmic

Synopsis

    rmic [options]classes

Remote Method Invocation compiler for Java. rmic takes the fully package-qualified class names and generates skeleton and stub class files to provide remote method invocation. The classes must have previously been successfully compiled with java.

For a method WhizImpl in class whiz, rmic creates two files, WhizImpl_Skel.class and WhizImpl_Stub.class. The "skeleton" file implements the server side of the RMI; the "stub" file implements the client side.

Options

-always, -alwaysgenerate

Always generate code, even if the existing IDL files are newer than the input class. Use with -idl or -iiop only.

-bootclasspath path

Use the colon-separated list of directories in path for the boot classes, instead of the boot classes used by the java command itself.

-classpath path

Use the colon-separated list of directories in path instead of $CLASSPATH to find class files. It is usually a good idea to have the current directory (".") on the search path.

-d dir

Place the generated files in dir.

-extdirs dirs

For cross-compilation, use the specified dirs as the extension directories.

-factory

Use the factory keyword in the IDL. Use with -idl only.

-g

Generate all debugging information, instead of just line numbers.

-idl

Generate OMG IDL for the specified classes.

-idlFilepackage[.class] file

Provide an IDLEntity file mapping from Java package package to IDL module file. Use with -idl only.

-idlModulepackage[.class] module

Provide an IDLEntity package mapping from Java package package to IDL module module. Use with -idl only.

-iiop

Generate IIOP stub and tie classes, instead of the default JRMP stub and skeleton classes.

-J java-option

Pass java-option on to the java program. Useful for changing the execution environment or memory usage. java-option should not contain spaces; use multiple -J options if necessary.

-keepg, -keepgenerated

Keep the generated .java source files for the skeletons and the stubs.

-nolocalstubs

Do not create stubs optimized for clients and servers that will run in the same process. Use with -iiop only.

-noValueMethods

Do not use valuetype methods and initializers in the generated IDL. Use with -idl only.

-nowarn

Disable all warnings.

-poa

Use the Portable Object Adapter. In other words, use org.omg.PortableServer.Servant instead of org.omg.CORBA_2_3.portable.ObjectImpl. Use with -idl only.

-sourcepath path

Use path to search for class and interface definitions. Classes found through the classpath may be recompiled if their source files are found.

-v VERS

Generate code compatible with version VERS of the JRMP protocol. VERS is one of 1.1, for the JDK 1.1 protocol, 1.2, for the JDK 1.2 protocol, or compat for code compatible with both versions.

-verbose

Print messages as files are compiled and loaded.

Name

rmid

Synopsis

    rmid [options]

RMI activation system daemon. This daemon must be started before activatable objects can be registered or activated.

Options

-C child-option

Pass child-option on to each child process. Useful, for example, for specifying a property's default value.

-J java-option

Pass java-option on to the java program. Useful for changing the execution environment or memory usage. java-option should not contain spaces; use multiple -J options if necessary.

-J-Dsun.rmi.activation.execPolicy= policy

Specify the policy for checking commands and command-line options. Specific to Sun's JVM. See the rmid(1) manpage for the details.

-log directory

Use directory as the directory in which to place the database and other information. The default is ./log.

-port port

Use port as the port for the rmid registry.

-stop

Stop the invocation of rmid that is using the port specified with -port. If no -port is given, stop the rmid running on port 1098.

Name

rmiregistry

Synopsis

    rmiregistry [port] [-Jjava-option]

Create and start a remote object registry on the specified port. The default port is 1099. The registry provides naming services for RMI (Remote Method Invocation) servers and clients.

Option

-J java-option

Pass java-option on to the java program. Useful for changing the execution environment or memory usage. java-option should not contain spaces; use multiple -J options if necessary.

Chapter 3. The Unix Shell: An Overview

For novice users, this chapter presents basic concepts about the Unix shell. For advanced users, this chapter also summarizes the major similarities and differences between the Bash, Korn, and "Tenex" C shells . Details on the three shells are provided in Chapters 4 and 5.

The following topics are presented:

Introduction to the shell

Purpose of the shell

Shell flavors

Shell source code

Common features

Differing features

Introduction to the Shell

Today's microwave ovens, and many other household appliances (ovens, washing machines, dishwashers), let you use simple push-buttons to instruct them what to do. They provide a simple user interface to a possibly complicated internal system.

The shell is the user interface to Unix, and by the same token, several shells are available in Unix. Most systems provide more than one for you to choose from. Each shell has different features, but all of them affect how commands will be interpreted and provide tools to create your Unix environment.

The original shells were developed before the time of Graphical User Interfaces (GUIs), and at first glance, appear harder to use than GUI interfaces. The truth, though, is that they aren't harder to use, they are harder to learn. However, once you've mastered them, you'll find that you can accomplish an infinite variety of tasks that just cannot be managed with a GUI.

The shell is simply a program that allows the system to understand your commands. (That's why the shell is often called a command interpreter.) For many users, the shell works invisibly--"behind the scenes." Your only concern is that the system does what you tell it to do; you don't care about the inner workings. In our microwave analogy, this is comparable to pressing the START button. Most of us don't care whether the user interface communicates with an embedded microcomputer, or drives analog electronics, as long as the popcorn is ready in time for the movie, and doesn't burn.

Purpose of the Shell

There are three uses for the shell:

Interactive use

Customization of your Unix session

Programming

Interactive Use

When the shell is used interactively, the system waits for you to type a command at the Unix prompt. Your commands can include special symbols that let you abbreviate filenames or redirect input and output.

Customization of Your Unix Session

A Unix shell defines variables to control the behavior of your Unix session. Setting these variables tells the system, for example, which directory to use as your home directory, or the file in which you store your mail. Some variables are preset by the system; you can define others in startup files that are read when you log in. Startup files can also contain Unix commands or special shell commands. These are executed every time you log in. Many shells also support special variables and internal commands that let you tailor the behavior of the shell itself.

Programming

Unix shells provide a set of special (or built-in) commands that let you create programs called shell scripts . In fact, many built-in commands can be used interactively like Unix commands, and Unix commands are frequently used in shell scripts. Scripts are useful for executing a series of individual commands. This is similar to BATCH files in MS-DOS and Windows. Scripts can also execute commands repeatedly (in a loop) or conditionally (if-else), as in many high-level programming languages.

Shell Flavors

Many different Unix shells are available. This quick reference describes the three most popular shells:

The GNU Project's Bash (Bourne-Again SHell), arguably the most popular shell in use today. It is a superset of the original Bourne shell , including command-line editing and many features first implemented in the Korn shell.

The Korn shell, a superset of the original Bourne shell that lets you edit the command line. There are two commonly available versions of the Korn shell, distinguished by the year they were released, and referred to in this book as ksh88 and ksh93 respectively.

The "Tenex" C shell, an enhanced version of the original BSD C shell, which uses C-like syntax and is more convenient for the interactive user than the original Bourne shell.

The original Bourne shell is available as /bin/sh on commercial Unix systems, and if invoked as sh, Bash will do its best to emulate the original Bourne shell's behavior. However, it is rare today to find the original Bourne shell being used interactively as a login shell; other shells that provide better interactive features and the Bourne shell's programming language, such as Bash and ksh, are more popular. However, when writing shell scripts, most people are careful to restrict themselves to just those features of the Bourne shell.

The /etc/passwd file determines which shell takes effect during your interactive Unix session. When you log in, the system checks your entry in /etc/passwd. The last field of each entry names a program to run as the default shell.[*] For example:

If the program name is:

Your shell is the:

/bin/sh

Bourne shell

/bin/bash

The Bash shell

/bin/ksh

Korn shell

/usr/dt/bin/dtksh

The Desktop Korn shell , a version of ksh93 (Solaris only)

/bin/csh

C shell or Tenex C shell (system dependent)

/bin/tcsh

Tenex C shell

You can change to another shell by typing the program name at the command line. For example, to change from the Bourne shell to the Korn shell, type:

    $ exec ksh

Which Shell Do I Want?

If you are new to Unix, picking a shell may be a bewildering question. Before ksh was commonly available, the general advice was to use csh for interactive use (because it supported job control and had other features that made it a better interactive shell than the Bourne shell), but to use the Bourne shell for scripting (because it is a more powerful programming language, and more universally available).

Today, a wide variety of Bourne-compatible shells are available that all support job control and some sort of command history and command-line editing. Of these, Bash is arguably the most popular, and it is a good choice. If Bash is not available but the Korn shell is, you should use the Korn shell. In any case, source code for both shells (as well as others) are easily available from the Internet.

[*] On Solaris or other networked Unix systems, this information may come from NIS or NIS+. Usually, your system administrator will handle this for you; just don't be surprised if your login name doesn't appear in /etc/passwd.

Shell Source Code URLs

Here is a list of URLs for the source code for different shells.

Shell

Location

Bash

ftp://ftp.gnu.org/gnu/bash

Bash source code patches

ftp://ftp.gnu.org/gnu/bash/bash-3.0-patches

Ksh93

http://www.research.att.com/sw/download/

The Z Shell

http://www.zsh.org

The Public Domain Korn Shell

http://web.cs.mun.ca/~michael/pdksh/

Tcsh

http://www.tcsh.org

The Public Domain Korn shell is mostly compatible with ksh88, and is usually the version of ksh shipped with GNU/Linux systems. The Z shell (zsh) has many features of the Bourne shell, Bash, and the Korn shell, and a plethora of features unique to it.

Common Features

The following table displays features that are common to the Bash, Korn, and C shells. Note that both the Korn shell and Bash are enhanced versions of the Bourne shell; therefore, they include all features of the Bourne shell, plus some others.

Symbol/command

Meaning/action

a Brace expansion is a compile-time feature in the Korn shell. Usually commercial versions don't have it, but if you compile from source code, you do get it by default.

>

Redirect output.

>>

Append to file.

<

Redirect input.

<<

"Here" document (redirect input).

|

Pipe output.

&

Run process in background.

;

Separate commands on same line.

~

Home directory symbol.

*

Match any character(s) in filename.

?

Match single character in filename.

[ ]

Match any characters enclosed.

()

Execute in subshell.

{ }

Expand elements in list.a

' '

Substitute output of enclosed command.

" "

Partial quote (allows variable and command expansion).

' '

Full quote (no expansion).

\

Quote following character.

$ var

Use value for variable.

$$

Process ID.

$0

Command name.

$ n

n th argument (0 ≤ n ≤ 9).

$*

All arguments as simple words.

#

Begin comment.

bg

Background execution.

break

Break from loop statements.

cd

Change directory.

continue

Resume a program loop.

echo

Display output.

eval

Evaluate arguments.

exec

Execute a new shell.

fg

Foreground execution.

history

List previous commands.

jobs

Show active jobs.

kill

Terminate running jobs.

shift

Shift positional parameters.

suspend

Suspend a foreground job (such as a shell created by su).

time

Time a command.

umask

Set default file permissions for new files.

unset

Erase variable or function definitions.

wait

Wait for a background job to finish.

Differing Features

The following table displays features that are different among the three shells.

bash

ksh

tcsh

Meaning/action

$

$

%

Prompt.

>|

>|

>!

Force redirection.

>>!

Force append.

> file 2>&1

> file 2>&1

>& file

Combine stdout and stderr.

>& file

>& file

Combine stdout and stderr.

' '

' '

' '

Substitute output of enclosed command.

$()

$()

Substitute output of enclosed command. (Preferred form.)

$HOME

$HOME

$home

Home directory.

var = value

var = value

setvar=value

Variable assignment.

export var = val

export var = val

setenv var val

Set environment variable.

${ nn }

${ nn }

More than nine args can be referenced.

"$@"

"$@"

All args as separate words.

$#

$#

$#argv

Number of arguments.

$?

$?

$status

Exit status.

$!

$!

Last background Process ID.

$-

$-

Current options.

. file

. file

source file

Read commands in file.

aliasx=y

aliasx=y

alias x y

Name x stands for y.

case

case

switch/case

Choose alternatives.

cd ~-

cd ~-

popd/pushd

Switch directories.

popd/pushd

popd/pushd

Switch directories.

done

done

end

End a loop statement.

esac

esac

endsw

End case or switch.

exit [ n ]

exit [ n ]

exit [( expr )]

Exit with a status.

for/do

for/do

foreach

Loop through values.

echo -E

print -r

glob

Ignore echo escapes.

hash

alias -t

hashstat

Display hashed commands (tracked aliases).

hash cmds

alias -t cmds

rehash

Remember command locations.

hash -r

PATH=$PATH

unhash

Forget command locations.

history

history

history

List previous commands.

fc -s

r

!!

Redo previous command.

fc -s str

r str

! str

Redo command that starts with str.

fc -s x = y [ cmd ]

r x = y [ cmd ]

! cmd :s/ x / y /

Edit command, then execute.

if ((i==5))

if ((i==5))

if ($i==5)

Sample if statement.

fi

fi

endif

End if statement.

ulimit

ulimit

limit

Set resource limits.

pwd

pwd

dirs

Print working directory.

read

read

$<

Read from standard input.

trap INTR

trap INTR

onintr

Ignore interrupts.

unalias

unalias

unalias

Remove aliases.

until/do

until/do

Begin until loop.

while/do

while/do

while

Begin while loop.

Chapter 4. The Bash and Korn Shells

The original Bourne shell distributed with V7 Unix in 1979 became the standard shell for writing shell scripts. The Bourne shell is still to be found in /bin/sh on many commercial Unix systems. The Bourne shell itself has not changed that much since its initial release, although it has seen modest enhancements over the years. The most notable new features were the CDPATH variable and a built-in test command with System III (circa 1980), command hashing and shell functions for System V Release 2 (circa 1984), and the addition of job control features for System V Release 4 (1989).

Because the Berkeley C shell (csh) offered features that were more pleasant for interactive use, such as command history and job control, for a long time the standard practice in the Unix world was to use the Bourne shell for programming and the C shell for daily use. David Korn at Bell Labs was the first developer to enhance the Bourne shell by adding csh-like features to it: history, job control, and additional programmability. Eventually, the Korn shell's feature set surpassed both the Bourne shell and the C shell, while remaining compatible with the Bourne shell for shell programming. Today, the POSIX standard defines the "standard shell" language and behavior based on the System V Bourne shell, with a selected subset of features from the Korn shell.

On most commercial Unix systems, including Solaris, /bin/ksh is ksh88 . On Mac OS X (10.4 and newer), however, it's a recent version of ksh93 from AT&T Research.

The Free Software Foundation, in keeping with its goal to produce a complete Unix work-alike system, developed a clone of the Bourne shell, written from scratch, named "Bash," the Bourne-Again SHell. Over time, Bash has become a POSIX-compliant version of the shell, with many additional features. A large part of these additional features overlap the features of the Korn shell, but Bash is not an exact Korn shell clone.

This chapter covers Bash , which is the primary shell for GNU/Linux and Mac OS X. Because ksh88 is still commonly found, and because the source code for ksh93 is available, this chapter also covers the two main versions of the Korn shell , ksh88 and ksh93. It presents the following topics:

Overview of features

Invoking the shell

Syntax

Functions

Variables

Arithmetic expressions

Command history

Job control

Command execution

Restricted shells

Built-in commands

http://www.gnu.org/software/bash/bash.html provides information about the Bash shell. Another page is http://cnswww.cns.cwru.edu/~chet/bash/bashtop.html. http://www.kornshell.com provides considerable information about the Korn shell. The section "Shell Source Code URLs" in Chapter 3 provides Internet URLs for source code download. See also Classic Shell Scripting, Learning the Korn Shell, and Learning the bash Shell, which are listed in the Bibliography.

All references in this chapter to the Bash shell are for Bash version 3 . Many of the features listed for ksh93 are found only in the version available from AT&T Research. Practically speaking, ksh93 binaries on commercial Unix systems tend to be very early versions of ksh93; you should download the source and build your own executable version if you wish to use ksh93 for production work.

Overview of Features

The Bash and Korn shells provide the following features:

Input/output redirection

Wildcard characters (metacharacters) for filename abbreviation

Shell variables and options for customizing your environment

A built-in command set for writing shell programs

Shell functions, for modularizing tasks within a shell program

Job control

Command-line editing (using the command syntax of either vi or Emacs)

Access to previous commands (command history)

Integer arithmetic

Arrays and arithmetic expressions

Command-name abbreviation (aliasing)

ksh93 and Bash (but not ksh88) have the following capabilities:

Upwards compliance with POSIX

Internationalization facilities

An arithmetic for loop

More ways to substitute variables

ksh93 adds the following capabilities:

Floating-point arithmetic and built-in arithmetic functions

Structured variable names and indirect variable references

Associative arrays

More ways to match patterns

Invoking the Shell

The command interpreter for the Bash shell (bash) or the Korn shell (ksh) can be invoked as follows:

    bash  [options]  [arguments]
    ksh   [options]  [arguments]

ksh and Bash can execute commands from a terminal, from a file (when the first argument is an executable script), or from standard input (if no arguments remain or if -s is specified). Both shells automatically print prompts if standard input is a terminal, or if -i is given on the command line.

On many systems, /bin/sh is a link to Bash. When invoked as sh, Bash acts more like the traditional Bourne shell: login shells read /etc/profile and ~/.profile, and regular shells read $ENV, if it's set. Full details are available in the bash(1) manpage.

Options

Common options

-c str

Read commands from string str.

-D

Print all $"..." strings in the program. Not ksh88.

-i

Create an interactive shell (prompt for input).

-p

Start up as a privileged user. Bash: don't read $ENV or $BASH_ENV, don't import functions from the environment, and ignore the value of $SHELLOPTS. Korn shell: don't process $HOME/.profile, read /etc/suid_profile instead of $ENV.

-r

Create a restricted shell.

-s

Read commands from standard input. Output from built-in commands goes to file descriptor 1; all other shell output goes to file descriptor 2.

-, --

End option processing.

Bash options

-O option

Enable shopt option option.

--debugger

Read the debugging profile at start-up, turn on the extdebug option to shopt, and enable function tracing. For use by the Bash debugger.

--dump-po-strings

Same as -D, but output in GNU gettext format.

--dump-strings

Same as -D.

--help

Print a usage message and exit successfully.

--init-filefile,--rcfilefile

Use file as the start-up file instead of ~/.bashrc for interactive shells.

--login

Shell is a login shell.

--noediting

Do not use the readline library for input, even in an interactive shell.

--noprofile

Do not read /etc/profile or any of the personal start-up files.

--norc

Do not read ~/.bashrc. Enabled automatically when invoked as sh.

--posix

Turn on POSIX mode.

--restricted

Same as -r.

--verbose

Same as set -v; the shell prints lines as it reads them.

--version

Print a version message and exit.

The remaining options to Bash and ksh are listed under the set built-in command.

Arguments

Arguments are assigned in order to the positional parameters $1, $2, etc. If the first argument is an executable script, commands are read from it, and the remaining arguments are assigned to $1, $2, etc. The name of the script is available as $0.

Syntax

This section describes the many symbols peculiar to the Bash and Korn shells . The topics are arranged as follows:

Special files

Filename metacharacters

Quoting

Command forms

Redirection forms

Coprocesses (Korn shell only)

Special Files

Both shells read one or more start-up files. Some of the files are read only when a shell is a login shell.

The Korn shell reads these files:

/etc/profile. Executed automatically at login, first.

~/.profile. Executed automatically at login, second.

$ENV. Specifies the name of a file to read when a new Korn shell is created. (ksh88: all shells. ksh93: interactive shells only.) The value is variable (ksh93: and command and arithmetic) substituted in order to determine the actual file name. Login shells read $ENV after processing the files /etc/profile and $HOME/.profile.

Bash reads these files:

/etc/profile. Executed automatically at login, first.

The first file found from this list: ~/.bash_profile, ~/.bash_login, or ~/.profile. Executed automatically at login, second.

~/.bashrc is read by every shell, after the login files. However, if invoked as sh, Bash instead reads $ENV, just as the Korn shell does.

For both shells, the getpwnam() and getpwuid() functions are the sources of home directories for ~ name abbreviations. (On single-user systems, the user database is stored in /etc/passwd. However on networked systems, this information may come from NIS, NIS+, or LDAP, not your workstation password file.)

Filename Metacharacters

*

Match any string of zero or more characters.

?

Match any single character.

[abc...]

Match any one of the enclosed characters; a hyphen can specify a range (e.g., a-z, A-Z, 0–9).

[!abc...]

Match any character not enclosed as above.

~

Home directory of the current user.

~ name

Home directory of user name.

~+

Current working directory ($PWD).

~-

Previous working directory ($OLDPWD).

In the Korn shell, or Bash with the extglob option on:

?( pattern )

Match zero or one instance of pattern.

*( pattern )

Match zero or more instances of pattern.

+( pattern )

Match one or more instances of pattern.

@( pattern )

Match exactly one instance of pattern.

!( pattern )

Match any strings that don't match pattern.

\ n

Match the text matched by the n'th subpattern in (...). ksh93 only.

This pattern can be a sequence of patterns separated by |, meaning that the match applies to any of the patterns. This extended syntax resembles that available in egrep and awk. In the Korn shell, but not in Bash, if & is used instead of |, all the patterns must match. & has higher precedence than |.

ksh93 and Bash support the POSIX [[=c=]] notation for matching characters that have the same weight, and [[.c.]] for specifying collating sequences. In addition, character classes, of the form [[:class:]], allow you to match the following classes of characters.

Class

Characters matched

Class

Characters matched

alnum

Alphanumeric characters

graph

Nonspace characters

alpha

Alphabetic characters

print

Printable characters

blank

Space or tab

punct

Punctuation characters

cntrl

Control characters

space

Whitespace characters

digit

Decimal digits

upper

Uppercase characters

lower

Lowercase characters

xdigit

Hexadecimal digits

Bash and ksh93 also accept the [:word:] character class, which is not in POSIX. [[:word:]] is equivalent to [[:alnum:]_].

Examples

$ ls new*
                     List new and new.1
$ cat ch?
                     Match ch9 but not ch10
$ vi[D-R]*
                     Match files that begin with uppercase D through R
$ pr !(*.o|core) | lpPrint files that are not object files or core dumps

Tip

On modern systems, ranges such as [D-R] are not portable; the system's locale may include more than just the uppercase letters from D to R in the range.

Quoting

Quoting disables a character's special meaning and allows it to be used literally, as itself. The following table displays characters that have special meaning to the Bash and Korn shells.

Character

Meaning

;

Command separator

&

Background execution

()

Command grouping

|

Pipe

< > &

Redirection symbols

* ? [ ] ~ + - @ !

Filename metacharacters

" ' \

Used in quoting other characters

'

Command substitution

$

Variable substitution (or command or arithmetic substitution)

space tab newline

Word separators

These characters can be used for quoting:

" "

Everything between " and " is taken literally, except for the following characters that keep their special meaning:

$

Variable (or command and arithmetic) substitution will occur.

'

Command substitution will occur.

"

This marks the end of the double quote.

' '

Everything between ' and ' is taken literally except for another '. You cannot embed another ' within such a quoted string.

\

The character following a \ is taken literally. Use within " " to escape ", $, and '. Often used to escape itself, spaces, or newlines.

$" "

Not ksh88. Just like " ", except that locale translation is done.

$' '

Not ksh88. Similar to ' ', but the quoted text is processed for the following escape sequences:

Sequence

Value

Sequence

Value

\a

Alert

\t

Tab

\b

Backspace

\v

Vertical tab

\c X

Control character X

\ nnn

Octal value nnn

\e

Escape

\x nn

Hexadecimal value nn

\E

Escape

\'

Single quote

\f

Form feed

\"

Double quote

\n

Newline

\\

Backslash

\r

Carriage return

Examples

    $ echo 'Single quotes "protect" double quotes'
    Single quotes "protect" double quotes
    $ echo "Well, isn't that \"special\"?"
    Well, isn't that "special"?
    $ echo "You have 'ls | wc -l' files in 'pwd'"
    You have      43 files in /home/bob
    $ echo "The value of \$x is $x"
    The value of $x is 100

Command Forms

cmd &

Execute cmd in background.

cmd1 ; cmd2

Command sequence; execute multiple cmds on the same line.

{ cmd1 ; cmd2 ; }

Execute commands as a group in the current shell.

( cmd1 ; cmd2 )

Execute commands as a group in a subshell.

cmd1 | cmd2

Pipe; use output from cmd1 as input to cmd2.

cmd1 ' cmd2 '

Command substitution; use cmd2 output as arguments to cmd1.

cmd1 $( cmd2 )

POSIX shell command substitution; nesting is allowed.

cmd $(( expression ))

POSIX shell arithmetic substitution. Use the result of expression as argument to cmd.

cmd1 && cmd2

AND; execute cmd1 and then (if cmd1 succeeds) cmd2. This is a "short-circuit" operation; cmd2 is never executed if cmd1 fails.

cmd1 || cmd2

OR; execute either cmd1 or (if cmd1 fails) cmd2. This is a "short-circuit" operation; cmd2 is never executed if cmd1 succeeds.

! cmd

NOT; execute cmd, and produce a zero exit status if cmd exits with a nonzero status. Otherwise, produce a nonzero status when cmd exits with a zero status. Not ksh88.

Examples

    $ nroff file > file.txt &
                     Format in the background
    $ cd; ls
                     Execute sequentially
    $ (date; who; pwd) > logfile
                     All output is redirected
    $ sort file | pr -3 | lp
                     Sort file, page output, then print
    $ vi 'grep -l ifdef *.c'
                     Edit files found by grep
    $ egrep '(yes|no)' 'cat list'
                     Specify a list of files to search
    $ egrep '(yes|no)' $(cat list)
                     POSIX version of previous
    $ egrep '(yes|no)' $(< list)
                     Faster, not in POSIX
    $ grep XX file && lp file
                     Print file if it contains the pattern;
    $ grep XX file || echo "XX not found"otherwise, echo an error message

Redirection Forms

File descriptor

Name

Common abbreviation

Typical default

0

Standard input

stdin

Keyboard

1

Standard output

stdout

Screen

2

Standard error

stderr

Screen

The usual input source or output destination can be changed, as seen in the following sections.

Simple redirection

cmd > file

Send output of cmd to file (overwrite).

cmd >> file

Send output of cmd to file (append).

cmd < file

Take input for cmd from file.

cmd << text

The contents of the shell script up to a line identical to text become the standard input for cmd (text can be stored in a shell variable). This command form is sometimes called a Here document. Input is usually typed at the keyboard or in the shell program. Commands that typically use this syntax include cat, ex, and sed. (If <<- is used, leading tabs are stripped from the contents of the here document , and the tabs are ignored when comparing input with the end-of-input text marker.) If any part of text is quoted, the input is passed through verbatim. Otherwise, the contents are processed for variable, command, and arithmetic substitutions.

cmd <<< word

Supply text of word, with trailing newline, as input to cmd. (This is known as a here string , from the free version of the rc shell.) Not ksh88.

cmd <> file

Open file for reading and writing on the standard input. The contents are not destroyed.[*]

cmd >| file

Send output of cmd to file (overwrite), even if the shell's noclobber option is set.

Redirection using file descriptors

cmd >& n

Send cmd output to file descriptor n.

cmd m >& n

Same, except that output that normally goes to file descriptor m is sent to file descriptor n.

cmd >&-

Close standard output.

cmd <& n

Take input for cmd from file descriptor n.

cmd m <& n

Same, except that input that normally comes from file descriptor m comes from file descriptor n.

cmd <&-

Close standard input.

cmd <& n -

Move input file descriptor n instead of duplicating it. Not ksh88.

cmd >& n -

Move output file descriptor n instead of duplicating it. Not ksh88.

Multiple redirection

cmd 2> file

Send standard error to file; standard output remains the same (e.g., the screen).

cmd > file 2>&1

Send both standard error and standard output to file.

cmd &> file

Same. Bash only, preferred form.

cmd >& file

Same. Bash only.

cmd > f1 2> f2

Send standard output to file f1, standard error to file f2.

cmd | tee files

Send output of cmd to standard output (usually the terminal) and to files. (See the Example in Chapter 2, under tee.)

cmd 2>&1 | tee files

Send standard output and error output of cmd to standard output (usually the terminal) and to files.

No space should appear between file descriptors and a redirection symbol; spacing is optional in the other cases.

Bash allows multidigit file descriptor numbers. The other shells do not.

Examples

    $ cat part1 > book
    $ cat part2 part3 >> book
    $ mail tim < report
    $ sed 's/^/XX /g' << END_ARCHIVE
    > This is often how a shell archive is "wrapped",
    > bundling text for distribution.  You would normally
    > run sed from a shell program, not from the command line.
    > END_ARCHIVE
    XX This is often how a shell archive is "wrapped",
    XX bundling text for distribution.  You would normally
    XX run sed from a shell program, not from the command line.

To redirect standard output to standard error:

    $ echo "Usage error: see administrator" 1>&2

The following command sends output (files found) to filelist and error messages (inaccessible files) to file no_access:

    $ find / -print > filelist 2>no_access

Coprocesses

Coprocesses are a feature of the Korn shell only.

cmd1 | cmd2 |&

Coprocess; execute the pipeline in the background. The shell sets up a two-way pipe, allowing redirection of both standard input and standard output.

read -p var

Read coprocess output into variable var.

print -p string

Write string to the coprocess.

cmd <&p

Take input for cmd from the coprocess.

cmd >&p

Send output of cmd to the coprocess.

exec n <&p

Move input from coprocess to file descriptor n.

exec n >&p

Move output for coprocess to file descriptor n.

Moving the coprocess input and output file descriptors to standard file descriptors allows you to open multiple coprocesses .

Examples

    $ ed - memo |&
                     Start coprocess
    $ print -p /word/
                     Send ed command to coprocess
    $ read -p search
                     Read output of ed command into variable search
    $ print "$search"
                     Show the line on standard output
    A word to the wise.

[*] With <, the file is opened read-only, and writes on the file descriptor will fail. With <>, the file is opened read-write; it is up to the application to actually take advantage of this.

Functions

A shell function is a grouping of commands within a shell script. Shell functions let you modularize your program by dividing it up into separate tasks. This way the code for each task need not be repeated every time you need to perform the task. The POSIX shell syntax for defining a function follows the Bourne shell:

name () {
        function body's code come here
    }

Functions are invoked just as are regular shell built-in commands or external commands. The command line parameters $1, $2, and so on receive the function's arguments, temporarily hiding the global values of $1, etc. For example:

    # fatal --- print an error message and die:

    fatal () {
        echo "$0: fatal error:" "$@" >&2     # messages to standard error
        exit 1
    }
    ...
    if [ $# = 0 ]    # not enough arguments
    then
        fatal not enough arguments
    fi

A function may use the return command to return an exit value to the calling shell program. Be careful not to use exit from within a function unless you really wish to terminate the entire program.

Bash and the Korn shell allow you to define functions using an additional keyword, function, as follows:

    function fatal {
        echo "$0: fatal error:" "$@" >&2     # messages to standard error
        exit 1
    }

When working with the different shells and defining functions, there are semantic differences that should be kept in mind:

In Bash, all functions share traps with the "parent" shell (except the DEBUG trap, if function tracing has been turned on). With the errtrace option enabled (either set -E or set -o errtrace), functions also inherit the ERR trap. If function tracing has been enabled, functions inherit the RETURN trap. Functions may have local variables, and they may be recursive. The syntax used to define a function is irrelevant.

In ksh88, all functions have their own traps and local variables, and may be recursive.

In ksh93, name () functions share traps with the "parent" shell and may not be recursive.

In ksh93, function functions have their own traps and local variables, and may be recursive. Using the . command with a function function gives it POSIX shell semantics (i.e., shared traps and variables).

Variables

This section describes the following:

Variable substitution

Built-in shell variables

Other shell variables

Arrays

Discipline functions (ksh93 only)

Special prompt strings

Variable Substitution

ksh93 provides structured variables, such as pos.x and pos.y. To create either one, pos must already exist, and braces must be used to retrieve their values. Names beginning with .sh are reserved for use by ksh.

No spaces should be used in the following expressions. The colon (:) is optional; if it's included, var must be nonnull as well as set.

var=value ...

Set each variable var to a value.

${ var }

Use value of var; braces are optional if var is separated from the following text. They are required for array variables, and in ksh93 if a variable name contains periods.

${ var :- value }

Use var if set; otherwise, use value.

${ var := value }

Use var if set; otherwise, use value and assign value to var.

${ var :? value }

Use var if set; otherwise, print value and exit (if not interactive). If value isn't supplied, print the phrase "parameter null or not set."

${ var :+ value }

Use value if var is set; otherwise, use nothing.

${# var }

Use the length of var.

${#*}

Use the number of positional parameters.

${#@}

Same.

${ var # pattern }

Use value of var after removing pattern from the left. Remove the shortest matching piece.

${ var ## pattern }

Same as # pattern, but remove the longest matching piece.

${ var % pattern }

Use value of var after removing pattern from the right. Remove the shortest matching piece.

${ var %% pattern }

Same as % pattern, but remove the longest matching piece.

In ksh93 and Bash:

${!prefix*}, ${!prefix@}

List of variables whose names begin with prefix.

${var:pos}, ${var:pos:len}

Starting at position pos (0-based) in variable var, extract len characters, or rest of string if no len. pos and len may be arithmetic expressions.

${ var / pat / repl }

Use value of var, with first match of pat replaced with repl.

${ var / pat }

Use value of var, with first match of pat deleted.

${ var // pat / repl }

Use value of var, with every match of pat replaced with repl.

${ var /# pat / repl }

Use value of var, with match of pat replaced with repl. Match must occur at beginning of the value.

${ var /% pat / repl }

Use value of var, with match of pat replaced with repl. Match must occur at end of the value.

In ksh93, indirect variables allow you to "alias" one variable name to affect the value of another. This is accomplished using typeset -n:

    $ greet="hello, world"
                  Create initial variable
    $ typeset -n friendly_message=greet
                  Set up alias
    $ echo $friendly_message
                  Access old value through new name
    hello, world
    $ friendly_message="don't panic"
                  Change the value
    $ echo $greet
                  Old variable is changed
    don't panic

Bash has a similar mechanism for indirect variable referencing:

    $ greet="hello, world"
                  Create initial variable
    $ friendly_message=greet
                  Aliasing variable
    $ echo ${!friendly_message}
                  Use the alias
    hello, world

Examples

    $ u=up d=down blank=
                     Assign values to three variables (last is null)
    $ echo ${u}root
                     Braces are needed here
    uproot
    $ echo ${u-$d}
                     Display value of u or d; since u is set, it's printed
    up
    $ echo ${tmp-'date'}
                     If tmp is not set, the date command is executed
    Mon Aug 30 11:15:23 EDT 2004
    $ echo ${blank="no data"}
                     blank is set, so it is printed (a blank line)
    $ echo ${blank:="no data"}
                     blank is set but null, so the string is printed
    no data
    $ echo $blank
                     blank now has a new value
    no data
    $ tail=${PWD##*/}
                     Take the current directory name and remove the
                     longest character string ending with /, whichremoves the leading pathname and leaves the tail

Built-in Shell Variables

Built-in variables are automatically set by the shell and are typically used inside shell scripts. Built-in variables can make use of the variable substitution patterns shown previously. Note that the $ is not actually part of the variable name, although the variable is always referenced this way. The following are available in any Bourne-compatible shell:

$#

Number of command-line arguments.

$-

Options currently in effect (arguments supplied on command line or to set).

$?

Exit value of last executed command.

$$

Process number of current process.

$!

Process number of last background command.

$0

First word; that is, command name. This will have the full pathname if it was found via a PATH search.

$ n

Individual arguments on command line (positional parameters). The Bourne shell allows only nine parameters to be referenced directly (n = 1–9); Bash and the Korn shell allow n to be greater than 9 if specified as ${ n }.

$*, $@

All arguments on command line ($1 $2 ...).

"$*"

All arguments on command line as one string ("$1 $2..."). The values are separated by the first character in IFS.

"$@"

All arguments on command line, individually quoted ("$1" "$2" ...).

Bash and the Korn shell automatically set these additional variables:

$_

Temporary variable; initialized to pathname of script or program being executed. Later, stores the last argument of previous command. Also stores name of matching MAIL file during mail checks.

HISTCMD

The history number of the current command.

LINENO

Current line number within the script or function.

OLDPWD

Previous working directory (set by cd).

OPTARG

Name of last option processed by getopts.

OPTIND

Numerical index of OPTARG.

PPID

Process number of this shell's parent.

PWD

Current working directory (set by cd).

RANDOM[= n ]

Generate a new random number with each reference; start with integer n, if given.

REPLY

Default reply, used by select and read.

SECONDS[= n ]

Number of seconds since the shell was started, or, if n is given, number of seconds + n since the shell started.

ksh93 automatically sets these additional variables. Variables whose names contain "." must be enclosed in braces when referenced, e.g., ${.sh.edchar}.

.sh.edchar

The character(s) entered when processing a KEYBD trap. Changing it replaces the characters that caused the trap.

.sh.edcol

The position of the cursor in the most recent KEYBD trap.

.sh.edmode

Will be equal to ESCAPE if in a KEYBD trap in vi mode, otherwise empty.

.sh.edtext

The characters in the input buffer during a KEYBD trap.

.sh.file

The pathename of the current script.

.sh.fun

The name of the current function.

.sh.match

Array variable containing text matched during a variable substitution. Index 0 is the entire value; the others correspond to parenthesized subexpressions.

.sh.name

The name of the variable running a discipline function.

.sh.subscript

The subscript of the variable running a discipline function.

.sh.value

The value of the variable inside the set and get discipline functions.

.sh.version

The version of ksh93.

Bash automatically sets these additional variables. Many of these variables are for use by the Bash Debugger (see http://bashdb.sourceforge.net) or for providing programmable completion (see the section "Programmable Completion (Bash Only)," later in this chapter).

BASH

The full pathname used to invoke this instance of Bash.

BASH_ARGC

Array variable. Each element holds the number of arguments for the corresponding function or dot-script invocation. Set only in extended debug mode, with shopt -s extdebug.

BASH_ARGV

An array variable similar to BASH_ARGC. Each element is one of the arguments passed to a function or dot-script. It functions as a stack, with values being pushed on at each call. Thus, the last element is the last argument to the most recent function or script invocation. Set only in extended debug mode, with shopt -s extdebug.

BASH_COMMAND

The command currently executing or about to be executed. Inside a trap handler, it is the command running when the trap was invoked.

BASH_EXECUTION_STRING

The string argument passed to the -c option.

BASH_LINENO

Array variable, corresponding to BASH_SOURCE and FUNCNAME. For any given function number i (starting at 0), ${FUNCNAME[i]} was invoked in file ${BASH_SOURCE[i]} on line ${BASH_LINENO[i]}. The information is stored with the most recent function invocation first.

BASH_REMATCH

Array variable, assigned by the =~ operator of the [[ ]] construct. Index 0 is the text that matched the entire pattern. The other indices are the text matched by parenthesized subexpressions. This variable is read-only.

BASH_SOURCE

Array variable, containing source filenames. Each element corresponds to those in FUNCNAME and BASH_LINENO.

BASH_SUBSHELL

This variable is incremented by one each time a subshell or subshell environment is created.

BASH_VERSINFO[0]

The major version number, or release, of Bash.

BASH_VERSINFO[1]

The minor version number, or version, of Bash.

BASH_VERSINFO[2]

The patch level.

BASH_VERSINFO[3]

The build version.

BASH_VERSINFO[4]

The release status.

BASH_VERSINFO[5]

The machine type, same value as in MACHTYPE.

BASH_VERSION

A string describing the version of Bash.

COMP_CWORD

For programmable completion. Index into COMP_WORDS, indicating the current cursor position.

COMP_LINE

For programmable completion. The current command line.

COMP_POINT

For programmable completion. The position of the cursor as a character index in COMP_LINE.

COMP_WORDBREAKS

For programmable completion. The characters that the readline library treats as word separators when doing word completion.

COMP_WORDS

For programmable completion. Array variable containing the individual words on the command line.

DIRSTACK

Array variable, containing the contents of the directory stack as displayed by dirs. Changing existing elements modifies the stack, but only pushd and popd can add or remove elements from the stack.

EUID

Read-only variable with the numeric effective UID of the current user.

FUNCNAME

Array variable, containing function names. Each element corresponds to those in BASH_SOURCE and BASH_LINENO.

GROUPS

Array variable containing the list of numeric group IDs in which the current user is a member.

HISTCMD

The history number of the current command.

HOSTNAME

The name of the current host.

HOSTTYPE

A string that describes the host system.

MACHTYPE

A string that describes the host system in the GNU cpu-company-system format.

OSTYPE

A string that describes the operating system.

PIPESTATUS

An array variable containing the exit statuses of the commands in the most recent foreground pipeline.

SHELLOPTS

A colon-separated list of shell options (for set -o). If set in the environment at start-up, Bash enables each option present in the list.

SHLVL

Incremented by one every time a new Bash starts up.

UID

Read-only variable with the numeric real UID of the current user.

Other Shell Variables

The following variables are not automatically set by the shell, although many of them can influence the shell's behavior. They are typically used in your .profile file, where you can define them to suit your needs. Variables can be assigned values by issuing commands of the form:

variable=value

This list includes the type of value expected when defining these variables. Those that are specific to the Bash shell are marked as (B). Those that are specific to the Korn shell are marked as (K). Those that are specific to ksh93 are marked (K93).

CDPATH= dirs

Directories searched by cd; allows shortcuts in changing directories; unset by default.

COLUMNS= n

Screen's column width; used in line edit modes and select lists.

COMPREPLY=( words ... )

(B) Array variable from which Bash reads the possible completions generated by a completion function.

EDITOR= file

(K) Pathname of line edit mode to turn on (can end in emacs or vi); used when VISUAL is not set.

EMACS

(B) If the value starts with t, Bash assumes it's running in an Emacs buffer and disables line editing.

ENV= file

Name of script that gets executed at start-up; useful for storing alias and function definitions. For example, ENV=$HOME/.kshrc.

FCEDIT= file

Editor used by fc command (default is /bin/ed). Obsoleted in ksh93 by HISTEDIT.

FIGNORE= pattern

(K93) Pattern describing the set of filenames to ignore during pattern matching. (B) Similar: colon-separated list of patterns describing filenames to ignore when doing filename completion.

FPATH= dirs

(K) Directories to search for function definitions; undefined functions are set via typeset -fu; FPATH is searched when these functions are first referenced. (ksh93 also searches PATH.)

GLOBIGNORE= patlist

(B) Colon-separated list of patterns describing the set of filenames to ignore during pattern matching.

HISTCONTROL= list

(B) Colon-separated list of values controlling how commands are saved in the history file. Recognized values are: ignoredups, ignorespace, ignoreboth, and erasedups.

HISTEDIT= file

(K93) Editor used by hist command, if set. Overrides the setting of FCEDIT.

HISTFILE= file

File in which to store command history. For ksh, it must be set before ksh is started, and the default is $HOME/.sh_history. If you use both Bash and ksh, be sure to have different files for this value, as the format of the saved history file is not compatible between the two shells.

HISTFILESIZE= n

(B) Number of lines to be kept in the history file. This may be different than the number of commands.

HISTIGNORE= list

(B) A colon-separated list of patterns that must match the entire command line. Matching lines are not saved in the history file. An unescaped & in a pattern matches the previous history line.

HISTSIZE= n

Number of history commands to be kept in the history file.

HISTTIMEFORMAT= string

(B) A format string for strftime(3) to use for printing timestamps along with commands from the history command. If set (even if null), Bash saves timestamps in the history file along with the commands.

HOME= dir

Home directory; set by login (from /etc/passwd file).

HOSTFILE= file

(B) Name of a file in the same format as /etc/hosts that Bash should use to find hostnames for hostname completion.

IFS=' chars '

Input field separators; default is space, tab, and newline.

IGNOREEOF= n

(B) Numeric value indicating how many successive EOF characters must be typed before Bash exits. If null or nonnumeric value, default is 10.

INPUTRC= file

(B) Initialization file for the readline library. This overrides the default value of ~/.inputrc.

LANG= dir

Default value for locale, used if no LC_* variables are set.

LC_ALL= locale

(B, K93) Current locale; overrides LANG and the other LC_* variables.

LC_COLLATE= locale

(B, K93) Locale to use for character collation (sorting order).

LC_CTYPE= locale

(B, K93) Locale to use for character class functions. (See the earlier section "Filename Metacharacters.")

LC_MESSAGES= locale

(B) Locale to use for translating $"..." strings.

LC_NUMERIC= locale

(B, K93) Locale to use for the decimal-point character.

LINES= n

Screen's height; used for select lists.

MAIL= file

Default file to check for incoming mail; set by login.

MAILCHECK= n

Number of seconds between mail checks; default is 600 (10 minutes).

MAILPATH= files

One or more files, delimited by a colon, to check for incoming mail. Along with each file, you may supply an optional message that the shell prints when the file increases in size. Messages are separated from the filename by a ? character, and the default message is You have mail in $_. $_ is replaced with the name of the file. For example, you might have:

    MAILPATH="$MAIL? Candygram!:/etc/motd?New Login Message"

OPTERR= n

(B) When set to 1 (the default value), Bash prints error messages from the built-in getopts command.

PATH= dirlist

One or more pathnames, delimited by colons, in which to search for commands to execute. Default for many systems is /bin:/usr/bin. On Solaris, the default is /usr/bin:. However, the standard start-up scripts change it to:

    /usr/bin:/usr/ucb:/etc:.

ksh93: PATH is also searched for function definitions for undefined functions.

POSIXLY_CORRECT= string

(B) When set at start-up or while running, Bash enters POSIX mode, disabling behavior and modifying features that conflict with the POSIX standard.

PROMPT_COMMAND= command

(B) If set, Bash executes this command each time before printing the primary prompt.

PS1= string

Primary prompt string; default is $.

PS2= string

Secondary prompt (used in multiline commands); default is >.

PS3= string

Prompt string in select loops; default is #?.

PS4= string

Prompt string for execution trace (ksh -x, bash -x, or set -x); default is +.

SHELL= file

Name of default shell (e.g., /bin/sh). Bash sets this if it's not in the environment at start-up.

TERM= string

Terminal type.

TIMEFORMAT= string

(B) A format string for the output for the time keyword.

TMOUT= n

If no command is typed after n seconds, exit the shell. Also affects the read command and the select loop.

VISUAL= path

(K) Same as EDITOR, but VISUAL is checked first.

auto_resume= list

(B) Enables the use of simple strings for resuming stopped jobs. With a value of exact, the string must match a command name exactly. With a value of substring, it can match a substring of the command name.

histchars= chars

(B) Two or three characters that control Bash's csh-style history expansion. The first character signals a history event. The second is the "quick substitution" character; the third indicates the start of a comment. The default value is !^#.

Arrays

Both shells support one-dimensional arrays . The first element is numbered 0. Bash has no limit on the number of elements. ksh88 allowed up 1024 elements, early versions of ksh93 allowed at least 4096 elements, and modern versions allow up to 65,536 elements. Arrays are initialized with a special form of assignment:

    message=(hi there how are you today)          Bash and ksh93

where the specified values become elements of the array. The Korn shell has an additional syntax:

    set -A message hi there how are you today     Ksh88 and ksh93

Individual elements may also be assigned to:

    message[0]=hi                                 This is the hard way
    message[1]=there
    message[2]=how
    message[3]=are
    message[4]=you
    message[5]=today

Declaring arrays is not required. Any valid reference to a subscripted variable can create an array.

When referencing arrays , use the ${ ... } syntax. This isn't needed when referencing arrays inside (()) (the form of let that does automatic quoting). Note that [ and ] are typed literally (i.e., they don't stand for optional syntax).

${ name [ i ]}

Use element i of array name. i can be any arithmetic expression as described under let.

${ name }

Use element 0 of array name.

${ name [*]}

Use all elements of array name.

${ name [@]}

Same.

${# name [*]}

Use the number of elements in array name.

${# name [@]}

Same.

ksh93 provides associative arrays , where the indices are strings instead of numbers (as in awk). In this case, [ and ] act like double quotes. Associative arrays are created with typeset -A. A special syntax allows assigning to multiple elements at once:

    data=([joe]=30 [mary]=25)

The values would be retrieved as ${data[joe]} and ${data[mary]}.

Discipline Functions (ksh93 Only)

Along with structured variables, ksh93 introduces discipline functions . These are special functions that are called whenever a variable's value is accessed or changed. For a shell variable named x, you can define the following functions:

x.get

Called when x's value is retrieved ($x).

x.set

Called when x's value is changed (x=2).

x.unset

Called when x is unset (unset x).

Within the discipline functions, special variables provide information about the variable being changed:

.sh.name

The name of the variable being changed.

.sh.subscript

The subscript of the array element being changed.

.sh.value

The value of the variable being assigned or returned. Changing it within the discipline function changes the value that is actually assigned or returned.

Special Prompt Strings

Both shells process the value of PS1 for special strings. The Korn shell expands a single ! into the current command number. Use !! to get a literal !. For example:

    PS1='cmd !> '

Bash processes the values of PS1, PS2, and PS4 for the following special escape sequences.

\a

An ASCII BEL character (octal 07).

\A

The current time in 24-hour HH:MM format.

\d

The date in "weekday month day" format.

\D{ format }

The date as specified by the strftime(3) format format. The braces are required.

\e

An ASCII Escape character (octal 033).

\h

The hostname, up to the first period.

\H

The full hostname.

\j

The current number of jobs.

\l

The basename of the shell's terminal device.

\n

A newline character.

\r

A carriage return character.

\s

The name of the shell (basename of $0).

\t

The current time in 24-hour HH:MM:SS format.

\T

The current time in 12-hour HH:MM:SS format.

\u

The current user's username.

\v

The version of Bash.

\V

The release (version plus patchlevel) of Bash.

\w

The current directory, with $HOME abbreviated as ~.

\W

The basename of the current directory, with $HOME abbreviated as ~.

\!

The history number of this command.

\#

The command number of this command.

\$

If the effective UID is 0, a #, otherwise a $.

\@

The current time in 12-hour a.m./p.m. format.

\ nnn

The character represented by octal value nnn.

\\

A literal backslash.

\[

Start a sequence of nonprinting characters, such as for highlighting or changing colors on a terminal.

\]

End a sequence of nonprinting characters.

In addition, some or all of the PS1-PS4 variables undergo different substitutions, as outlined in the following table:

Substitution

ksh88

ksh93

Bash

! for command number

PS1

PS1

Escape sequences

PS1, PS2, PS4

Variable substitution

PS1

PS1

PS1, PS2, PS4

Command substitution

PS1

PS1, PS2, PS4

Arithmetic substitution

PS1

PS1, PS2, PS4

In Bash, the escape sequences are processed first, and then, if the promptvars shell option is enabled via the shopt command (the default), the substitutions are performed.

Arithmetic Expressions

The let command performs arithmetic. ksh88 and Bash are restricted to integer arithmetic. ksh93 can do floating-point arithmetic as well. Both shells provide a way to substitute arithmetic values (for use as command arguments or in variables); base conversion is also possible:

$(( expr ))

Use the value of the enclosed arithmetic expression.

B # n

Interpret integer n in numeric base B. For example, 8#100 specifies the octal equivalent of decimal 64.

Operators

The shells use arithmetic operators from the C programming language, in decreasing order of precedence. ksh88 does not support the ++, --, unary +, ?:, comma, or ** operators. Early versions of ksh93 do not have **.

Operator

Description

a In ksh93, the ** operator is right-associative. In bash versions prior to 3.1, it is left-associative. It will be changed to right-associative starting with version 3.1.

++ --

Auto-increment and auto-decrement, both prefix and postfix.

+ - ! ~

Unary plus and minus, logical negation and binary inversion (one's complement).

**

Exponentiation.a

* / %

Multiplication; division; modulus (remainder).

+ -

Addition; subtraction.

<< >>

Bitwise left shift; bitwise right shift.

< <= > >=

Less than; less than or equal to; greater than; greater than or equal to.

== !=

Equality; inequality (both evaluated left to right).

&

Bitwise AND.

^

Bitwise exclusive OR.

|

Bitwise OR.

&&

Logical AND (short-circuit).

||

Logical OR (short-circuit).

?:

Inline conditional evaluation.

= += -=

*= /= %=

<<= >>=

Assignment.

&= ^= |=

,

Sequential expression evaluation.

Built-in Mathematical Functions (ksh93 Only)

ksh93 provides access to the standard set of mathematical functions. They are called using C function call syntax.

Name

Function

Name

Function

abs

Absolute value

hypot

Euclidean distance

acos

Arc cosine

int

Integer part of floating-point number

asin

Arc sine

log

Natural logarithm

atan

Arc tangent

pow

Exponentiation (x y)

atan2

Arc tangent of two values

sin

Sine

cos

Cosine

sinh

Hyperbolic sine

cosh

Hyperbolic cosine

sqrt

Square root

exp

Exponential (e x)

tan

Tangent

fmod

Floating-point remainder

tanh

Hyperbolic tangent

Examples

    let "count=0" "i = i + 1"               Assign i and count
    let "num % 2"                           Test for an even number
    (( percent >= 0 && percent <= 100 ))Test the range of a value

See the let entry in the later section "Built-in Commands (Bash and Korn Shells)" for more information and examples.

Command History

Both shells let you display or modify previous commands. Commands in the history list can be modified using:

Line-edit mode

The fc and hist commands

Bash also supports a command history mechanism very similar to that of the C shell. Because the interactive line-editing features are considerably superior, and because Bash's command history is almost identical to that of the C shell, we have chosen not to cover those features here. See Chapter 5 and the Bash manpage for more information.

Line-Edit Mode

Line-edit mode emulates many features of the vi and emacs editors. The history list is treated like a file. When the editor is invoked, you type editing keystrokes to move to the command line you want to execute. You can also change the line before executing it. When you're ready to issue the command, press the ENTER key.

In ksh, line-edit mode can be started in several ways. For example, these are equivalent:

    $ VISUAL=vi
    $ EDITOR=vi
    $ set -o viOverrides value of VISUAL or EDITOR

For Bash, you must use either set -o vi or set -o emacs; assignment to the VISUAL or EDITOR variables has no effect.

Note that vi starts in input mode; to type a vi command, press the Escape key first.

Common editing keystrokes

vi

emacs

Result

k

CTRL-p

Get previous command.

j

CTRL-n

Get next command.

/ string

CTRL-r string

Get previous command containing string.

h

CTRL-b

Move back one character.

l

CTRL-f

Move forward one character.

b

ESC-b

Move back one word.

w

ESC-f

Move forward one word.

X

DEL

Delete previous character.

x

CTRL-d

Delete character under cursor.

dw

ESC-d

Delete word forward.

db

ESC-h

Delete word backward.

xp

CTRL-t

Transpose two characters.

The fc and hist Commands

"fc" stands for either "find command" or "fix command," since it does both jobs. Use fc -l to list history commands and fc -e to edit them. See the fc entry in the later section "Built-in Commands (Bash and Korn Shells)," for more information.

In ksh93, the fc command has been renamed hist, and alias fc=hist is predefined.

Examples

    $ history
                     List the last 16 commands
    $ fc -l 20 30
                     List commands 20 through 30
    $ fc -l -5
                     List the last 5 commands
    $ fc -l cat
                     List all commands since the last command beginning with cat
    $ fc -l 50
                     List all commands since command 50
    $ fc -ln 5 > doit
                     Save command 5 to file doit
    $ fc -e vi 5 20
                     Edit commands 5 through 20 using vi
    $ fc -e emacsEdit previous command using emacs

The following only work in the Korn shell, which predefines the r alias:

    $ r
                     Reexecute previous command
    $ r cat
                     Reexecute last cat command
    $ r doc=Doc
                     Substitute, then reexecute last command
    $ r chap=doc cReexecute last command that begins with c, but change string chap to doc

For both shells, the interactive line-editing is easier to use than fc, since you can move up and down in the saved command history using your favorite editor commands (as long as your favorite editor is either vi or Emacs!). Current versions of both shells also let you use the Up and Down arrow keys to traverse the command history.

Programmable Completion (Bash Only)

Bash and the readline library provide completion facilities, whereby you can type part of a command name, hit the TAB key, and have Bash fill in part or all of the rest of the command or filename. Programmable completion lets you, as a shell programmer, write code to customize the list of possible completions that Bash will present for a particular, partially entered word. This is accomplished through the combination of several facilities.

The complete command allows you provide a completion specification, or compspec, for individual commands. You specify, via various options, how to tailor the list of possible completions for the particular command. This is simple, but adequate for many needs. (See the complete entry in the section "Built-in Commands (Bash and Korn Shells)," later in this chapter.)

For more flexibility, you may use complete -F funcname command. This tells Bash to call funcname to provide the list of completions for command. You write the funcname function.

Within the code for a -F function, the COMP* shell variables provide information about the current command line. COMPREPLY is an array into which the function places the final list of completion results.

Also within the code for a -F function, you may use the compgen command to generate a list of results, such as "usernames that begin with a" or "all set variables." The intent is that such results would be used with an array assignment:

    ...
    COMPREPLY=( $( compgen options arguments ) )
    ...

Compspecs may be associated with either a full pathname for a command, or more commonly, with the an unadorned command name (/usr/bin/man versus plain man). Completions are attempted in the following order, based on the options provided to the complete command.

Bash first identifies the command. If a pathname is used, Bash looks to see if a compspec exists for the full pathname. Otherwise, it sets the command name to the last component of the pathname, and searches for a compspec for the command name.

If a compspec exists, Bash uses it. If not, Bash falls back to the default built-in completions.

Bash performs the action indicated by the compspec to generate a list of possible matches. Of this list, only those that have the word being completed as a prefix are used for the list of possible completions. For the -d and -f options, the variable FIGNORE is used to filter out undesirable matches.

Bash generates filenames as specified by the -G option. GLOBIGNORE is not used to filter the results, but FIGNORE is.

Bash processes the argument string provided to -W. The string is split using the characters in $IFS. The resulting list provides the candidates for completion. This is often used to provide a list of options that a command accepts.

Bash runs functions and commands as specified by the -F and -C options. For both, Bash sets COMP_LINE and COMP_POINT as described previously. For a shell function, COMP_WORDS and COMP_CWORD are also set.

Also for both, $1 is the name of the command whose arguments are being completed, $2 is the word being completed, and $3 is the word in front of the word being completed. Bash does not filter the results of the command or function.

Functions named with -F are run first. The function should set the COMPREPLY array to the list of possible completions. Bash retrieves the list from there.

Commands provided with -C are run next, in an environment equivalent to command substitution. The command should print the list of possible completions, one per line. An embedded newline should be escaped with a backslash.

Once the list is generated, Bash filters the results according to the -X option. The argument to -X is a pattern specifying files to exclude. By prefixing the pattern with a !, the sense is reversed, and the pattern instead specifies that only matching files should be retained in the list.

An & in the pattern is replaced with the text of the word being completed. Use \& to produce a literal &.

Finally, Bash prepends or appends any prefixes or suffixes supplied with the -P or -S options.

In the case that no matches were generated, if -o dirnames was used, Bash attempts directory name completion.

On the other hand, if -o plusdirs was provided, Bash adds the result of directory completion to the previously generated list.

Normally, when a compspec is provided, Bash's default completions are not attempted, nor are the readline library's default filename completions.

If the compspec produces no results and -o bashdefault was provided, then Bash attempts its default completions.

If neither the compspec nor the Bash default completions with -o bashdefault produced any results, and -o default was provided, then Bash has the readline library attempt its filename completions.

Ian Macdonald has collected a large set of useful compspecs, often distributed as the file /etc/bash_completion. If your system does not have it, one location for downloading it is http://www.dreamind.de/files/bash-stuff/bash_completion. It is worth retrieving and reviewing.

Examples

Restrict files for the C compiler to C, C++ and assembler source files, and relocatable object files:

    complete -f -X '!*.[Ccos]' gcc cc

For the man command, restrict expansions to things that have manpages:

    # Simple example of programmable completion for manual pages.
    # A more elaborate example appears in the bash_completion file.
    # Assumes   man [num] command   command syntax.

    shopt -s extglob                                      Enable extended pattern
                                                                                                                   matching
    _man () {
        local dir mandir=/usr/share/man                   Local variables

        COMPREPLY=()                                      Clear reply list
        if [[ ${COMP_WORDS[1]} = +([0-9]) ]]              Section number provided
        then
            # section provided: man 3 foo
            dir=$mandir/man${COMP_WORDS[COMP_CWORD-1]}    Look in that directory
        else
            # no section, default to commands
            dir=$mandir/'man[18]'                         Look in command
                                                           directories
        fi
        COMPREPLY=( $( find $dir -type f |                Generate raw file list
                sed 's;..*/;;' |                          Remove leading directories
                sed 's/\.[0-9].*$//' |                    Remove trailing suffixes
                grep "^${COMP_WORDS[$COMP_CWORD]}" |      Keep those that match
                                                          given prefix
                sort                                      Sort final list
                ) )
    }
    complete -F _man man                                  Associate function withcommand

Job Control

Job control lets you place foreground jobs in the background, bring background jobs to the foreground, or suspend (temporarily stop) running jobs. All modern Unix systems, including Linux and BSD systems, support job control ; thus, the job control features are automatically enabled. Many job control commands take a jobID as an argument. This argument can be specified as follows:

% n

Job number n.

% s

Job whose command line starts with string s.

%? s

Job whose command line contains string s.

%%

Current job.

%+

Current job (same as above).

%-

Previous job.

Both shells provide the following job control commands. For more information on these commands, see the section "Built-in Commands (Bash and Korn Shells)" later in this chapter.

bg

Put a job in the background.

fg

Put a job in the foreground.

jobs

List active jobs.

kill

Terminate a job.

stty tostop

Stop background jobs if they try to send output to the terminal. (Note that stty is not a built-in command.)

suspend

Suspend a job-control shell (such as one created by su).

wait

Wait for background jobs to finish.

CTRL-Z

Suspend a foreground job. Then use bg or fg. (Your terminal may use something other than CTRL-Z as the suspend character.)

Command Execution

When you type a command to Bash or ksh93, they look in the following places until they find a match:

Keywords such as if and for.

Aliases. You can't define an alias whose name is a shell keyword, but you can define an alias that expands to a keyword, e.g., alias aslongas=while. (Bash, when not in POSIX mode, does allow you to define an alias for a shell keyword.)

Special built-ins like break and continue. The list of POSIX special built-ins is . (dot), :, break, continue, eval, exec, exit, export, readonly, return, set, shift, times, trap, and unset. The Korn shell adds alias, login, typeset, and unalias, while Bash adds source.

Functions. When not in POSIX mode, Bash finds functions before built-in commands.

Nonspecial built-ins like cd and test.

Scripts and executable programs, for which the shell searches in the directories listed in the PATH environment variable.

The distinction between "special" built-in commands and nonspecial ones comes from POSIX. This distinction, combined with the command command, makes it possible to write functions that override shell built-ins, such as cd. For example:

    cd () {                       Shell function; found before built-in cd
        command cd "$@"           Use real cd to change directory
        echo now in $PWD          Other stuff we want to do
    }

In ksh88, the search order is different, all built-ins are found before shell functions. Thus you have to do more work to override a built-in command with a function. You do so using a combination of functions and aliases:

    _cd () {                      Shell function; note leading underscore
        cd "$@"                   Use real cd to change directory
        echo now in $PWD          Other stuff we want to do
    }
    alias cd=_cdAlias found first

Restricted Shells

A restricted shell is one that disallows certain actions, such as changing directory, setting PATH, or running commands whose names contain a / character.

The original V7 Bourne shell had an undocumented restricted mode. Later versions of the Bourne shell clarified the code and documented the facility. Today, Bash and the Korn shell both supply a restricted mode, but with differing sets of items that get restricted. (See the respective manual pages for the details.)

Shell scripts can still be run, since in that case the restricted shell calls the unrestricted version of the shell to run the script. This includes the /etc/profile, $HOME/.profile, and other start-up files.

Restricted shells are not used much in practice, as they are difficult to set up correctly.

Built-in Commands (Bash and Korn Shells)

Examples to be entered as a command line are shown with the $ prompt. Otherwise, examples should be treated as code fragments that might be included in a shell script. For convenience, some of the reserved words used by multiline commands are also included.

Name

!

Synopsis

    ! pipeline

Not ksh88. Negate the sense of a pipeline. Returns an exit status of 0 if the pipeline exited nonzero, and an exit status of 1 if the pipeline exited zero. Typically used in if and while statements.

Example

This code prints a message if user jane is not logged on:

    if ! who | grep jane > /dev/null
    then
            echo jane is not currently logged on
    fi

Name

#

Synopsis

    #

Ignore all text that follows on the same line. # is used in shell scripts as the comment character and is not really a command.

Name

#!shell

Synopsis

    #!shell [option]

Used as the first line of a script to invoke the named shell. Anything given on the rest of the line is passed as a single argument to the named shell. This feature is typically implemented by the kernel, but may not be supported on some older systems. Some systems have a limit of around 32 characters on the maximum length of shell. For example:

    #!/bin/sh

Name

:

Synopsis

    :

Null command. Returns an exit status of 0. See this Example and the ones under case. The line is still processed for side effects, such as variable and command substitutions, or I/O redirection.

Example

Check whether someone is logged in:

    if who | grep $1 > /dev/null
    then :   # Do nothing if user is found
    else echo "User $1 is not logged in"
    fi

Name

.

Synopsis

    . file [arguments]

Read and execute lines in file. file does not have to be executable but must reside in a directory searched by PATH. The arguments are stored in the positional parameters. If Bash is not in POSIX mode and file is not found in PATH, Bash will look in the current directory for file.

Name

[[ ]]

Synopsis

    [[ expression ]]

Same as test expression or [ expression ], except that [[ ]] allows additional operators. Word splitting and filename expansion are disabled. Note that the brackets ([ ]) are typed literally, and that they must be surrounded by whitespace.

Additional Operators

&&

Logical AND of test expressions (short circuit).

||

Logical OR of test expressions (short circuit).

<

First string is lexically "less than" the second.

>

First string is lexically "greater than" the second.

Name

name ()

Synopsis

name () { commands; }

Define name as a function. POSIX syntax. The function definition can be written on one line or across many. Bash and the Korn shell provide the function keyword, alternate forms that work similarly. See the earlier section "Functions."

Example

$ count () {
    > ls | wc -l
    >}

When issued at the command line, count now displays the number of files in the current directory.

Name

alias

Synopsis

    alias [options] [name[='cmd']]

Assign a shorthand name as a synonym for cmd. If =' cmd ' is omitted, print the alias for name; if name is also omitted, print all aliases. If the alias value contains a trailing space, the next word on the command line also becomes a candidate for alias expansion. See also unalias.

These aliases are built into ksh88. Some use names of existing Bourne shell or C shell commands.

    autoload='typeset -fu'
    false='let 0'
    functions='typeset -f'
    hash='alias -t'
    history='fc -l'
    integer='typeset -i'
    nohup='nohup '
    r='fc -e -'
    true=':'
    type='whence -v'

The following aliases are built into ksh93:

    autoload='typeset -fu'
    command='command '
    fc='hist'
    float='typeset -E'
    functions='typeset -f'
    hash='alias -t --'
    history='hist -l'
    integer='typeset -i'
    nameref='typeset -n'
    nohup='nohup '
    r='hist -s'
    redirect='command exec'
    stop='kill -s STOP'
    times='{ {time;} 2>&1;}'
    type='whence -v'

Options

-p

Print the word alias before each alias. Not ksh88.

-t

Create a tracked alias for a Unix command name. The Korn shell remembers the full pathname of the command, allowing it to be found more quickly and to be issued from any directory. If no name is supplied, current tracked aliases are listed. Tracked aliases are the similar to hashed commands in Bash. Korn shell only. ksh93 always does alias tracking.

-x

Export the alias; it can now be used in shell scripts and other subshells. If no name is supplied, current exported aliases are listed. Korn shell only. ksh93 accepts this option but ignores it.

Example

    alias dir='echo ${PWD##*/}'

Name

autoload

Synopsis

    autoload [functions]

Korn shell alias for typeset -fu. Load (define) the functions only when they are first used.

Name

bind

Synopsis

    bind [-m map] [options]
    bind [-m map] [-q function] [-r sequence] [-u function]
    bind [-m map] -f file
    bind [-m map] -x sequence:command
    bind [-m map] sequence:function
    bindreadline-command

Bash only. Manage the readline library. Non-option arguments have the same form as in a .inputrc file.

Options

-f file

Read key bindings from file.

-l

List the names of all the readline functions.

-m map

Use map as the keymap. Available keymaps are: emacs, emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move, vi-command, and vi-insert. vi is the same as vi-command and emacs is the same emacs-standard.

-p

Print the current readline bindings such that they can be reread from a .inputrc file.

-P

Print the current readline bindings.

-q function

Query which keys invoke the readline function function.

-r sequence

Remove the binding for key sequence sequence.

-s

Print the current readline key sequence and macro bindings such that they can be reread from a .inputrc file.

-S

Print the current readline key sequence and macro bindings.

-u function

Unbind all keys that invoke the readline function function.

-v

Print the current readline variables such that they can be reread from a .inputrc file.

-V

Print the current readline variables.

-x sequence : command

Execute the shell command command whenever sequence is entered.

Name

bg

Synopsis

    bg [jobIDs]

Put current job or jobIDs in the background. See the earlier section "Job Control."

Name

break

Synopsis

    break [n]

Exit from a for, while, select, or until loop (or break out of n loops).

Name

builtin

Synopsis

    builtin command [ arguments ... ]

Bash version. Run the shell built-in command command with the given arguments. This allows you to bypass any functions that redefine a built-in command's name. The command command is more portable.

Example

This function lets you do your own tasks when you change directory:

    cd () {
        builtin cd "$@"             Actually change directory
        pwd                         Report location
    }

Name

builtin

Synopsis

    builtin [ -ds ] [ -f library ] [ name ... ]

ksh93 version. This command allows you to load new built-in commands into the shell at runtime from shared library files.

If no arguments are given, builtin prints all the built-in command names. With arguments, builtin adds each name as a new built-in command (like cd or pwd). If the name contains a slash, the newly-added built-in version is used only if a path search would otherwise have found a command of the same name. (This allows replacement of system commands with faster, built-in versions.) Otherwise, the built-in command is always found.

Options

-d

Delete the built-in command name.

-f

Load new built-in command from library.

-s

Only print "special" built-ins (those designated as special by POSIX).

Name

caller

Synopsis

    caller [expression]

Bash only. Print the line number and source filename of the current function call or dot file. With nonzero expression, prints that element from the call stack. The most recent is zero. This command is for use by the Bash debugger.

Name

case

Synopsis

    case value in
     pattern1) cmds1;;
     pattern2) cmds2;;
     .
     .
     .
    esac

Execute the first set of commands (cmds1) if value matches pattern1, execute the second set of commands (cmds2) if value matches pattern2, etc. Be sure the last command in each set ends with ;;. value is typically a positional parameter or other shell variable. cmds are typically Unix commands, shell programming commands, or variable assignments. Patterns can use file-generation metacharacters. Multiple patterns (separated by |) can be specified on the same line; in this case, the associated cmds are executed whenever value matches any of these patterns. See the Examples here and under eval.

The shells allow pattern to be preceded by an optional open parenthesis, as in ( pattern ). In Bash and ksh88, it's necessary for balancing parentheses inside a $() construct.

The Korn shell allows a case to end with ;& instead of ;;. In such cases control "falls through" to the group of statements for the next pattern.

Examples

Check first command-line argument and take appropriate action:

    case $1 in     # Match the first arg
        no|yes) response=1;;
        -[tT])  table=TRUE;;
        *)      echo "unknown option"; exit 1;;
    esac

Read user-supplied lines until user exits:

    while :        # Null command; always true
    do
       printf "Type . to finish ==> "
       read line
       case "$line" in
          .) echo "Message done"
             break ;;
          *) echo "$line" >> $message ;;
       esac
    done

Name

cd

Synopsis

    cd [-LP] [dir]
    cd [-LP] [-]
    cd [-LP] [old new]

With no arguments, change to home directory of user. Otherwise, change working directory to dir. If dir is a relative pathname but is not in the current directory, the CDPATH variable is searched. A directory of - stands for the previous directory. The last syntax is specific to the Korn shell. It modifies the current directory name by replacing string old with new and then switches to the resulting directory.

Options

-L

Use the logical path (what the user typed, including any symbolic links) for cd .. and the value of PWD. This is the default.

-P

Use the actual filesystem physical path for cd .. and the value of PWD.

Example

$ pwd
    /var/spool/cron
    $ cd cron uucp
                     Ksh: cd prints the new directory
    /var/spool/uucp

Name

command

Synopsis

    command [-pvV] name [arg ...]

Not ksh88. Without -v or -V, execute name with given arguments. This command bypasses any aliases or functions that may be defined for name. When used with a special built-in, prevents the built-in from exiting the script if it fails.

Options

-p

Use a predefined, default search path, not the current value of PATH.

-v

Print a description of how the shell interprets name.

-V

Print a more verbose description of how the shell interprets name.

Example

Create an alias for rm that will get the system's version, and run it with the -i option:

    $ alias 'rm=command -p rm -i'

Name

compgen

Synopsis

    compgen [options] [string]

Bash only. Generate possible completions for string according to the options. Options are those accepted by complete, except for -p and -r. For more information, see the entry for complete.

Name

complete

Synopsis

    complete [options]command ...

Bash only. Specifies the way to complete arguments for each command. This is discussed in the section "Programmable Completion (Bash Only)," earlier in the chapter.

Options

-a

Same as -A alias.

-A type

Use type to specify a list of possible completions. The type may be one of the following.

alias

Alias names.

arrayvar

Array variable names.

binding

Bindings from the readline library.

builtin

Shell built-in command names.

command

Command names.

directory

Directory names.

disabled

Names of disabled shell built-in commands.

enabled

Names of enabled shell built-in commands.

export

Exported variables.

file

Filenames.

function

Names of shell functions.

group

Group names.

helptopic

Help topics as allowed by the help built-in command.

hostname

Hostnames, as found in the file named by $HOSTFILE.

job

Job names.

keyword

Shell reserved keywords.

running

Names of running jobs.

service

Service names (from /etc/services).

setopt

Valid arguments for set -o.

shopt

Valid option names for the shopt built-in command.

signal

Signal names.

stopped

Names of stopped jobs.

user

Usernames.

variable

Shell variable names.

-b

Same as -A builtin.

-c

Same as -A command.

-C command

Run command in a subshell and use its output as the list of completions.

-d

Same as -A directory.

-e

Same as -A export.

-f

Same as -A file.

-F function

Run shell function function in the current shell. Upon its return, retrieve the list of completions from the COMPREPLY array.

-g

Same as -A group.

-G pattern

Expand pattern to generate completions.

-j

Same as -A job.

-k

Same as -A keyword.

-o option

Control the behavior of the completion specification. The value for option is one of the following.

bashdefault

Fall back to the normal Bash completions if no matches are produced.

default

Use the default readline completions if no matches are produced.

dirnames

Do directory name completion if no matches are produced.

filenames

Inform the readline library that the intended output is filenames, so the library can do any filename-specific processing, such as adding a trailing slash for directories, or removing trailing spaces.

nospace

Inform the readline library that it should not append a space to words completed at the end of a line.

plusdirs

Attempt directory completion and add any results to the list of completions already generated.

-p

With no commands, print all completion settings in a way that can be reread.

-P prefix

The prefix is added to each resulting string as a prefix after all the other options have been applied.

-r

Remove the completion settings for the given commands, or all settings if no commands.

-s

Save as -A service.

-S suffix

The suffix is added to each resulting string as a suffix after all the other options have been applied.

-u

Same as -A user.

-v

Same as -A variable.

-W wordlist

Split wordlist (a single shell word) using $IFS. The generated list contains the members of the split list that matched the word being completed. Each member is expanded using brace expansion, tilde expansion, parameter and variable expansion, command substitution, and arithmetic expansion. Shell quoting is respected.

-X pattern

Exclude filenames matching pattern from the filename completion list. With a leading !, the sense is reversed, and only filenames matching pattern are retained.

Name

continue

Synopsis

    continue [n]

Skip remaining commands in a for, while, select, or until loop, resuming with the next iteration of the loop (or skipping n loops).

Name

declare

Synopsis

    declare [options] [name[=value]]

Bash only. Declare variables and manage their attributes. In function bodies, variables are local, as if declared with the local command.

Options

-a

Each name is an array.

-f

Each name is a function.

-F

For functions, print just the functions' name and attributes, not the function definition (body).

-i

Each variable is an integer; in an assignment, the value is evaluated as an arithmetic expression.

-p

With no names, print all variables and their values. With names, print the names, attributes, and values of the given variables. This option causes all other options to be ignored.

-r

Mark names as read-only. Subsequent assignments will fail.

-t

Apply the trace attribute to each name. Traced functions inherit the DEBUG trap. This attribute has no meaning for variables.

-x

Mark names for export into the environment of child processes.

With a + instead of a -, the given attribute is disabled. With no variable names, all variables having the given attribute(s) are printed in a form that can be reread as input to the shell.

Examples

$ declare -i val
                     Make val an integer
    $ val=4+7
                     Evaluate value
    $ echo $val
                     Show result
    11

    $ declare -r z=42
                     Make z readonly
    $ z=31
                     Try to assign to it
    bash: z: readonly variable    Assignment fails
    $ echo $z
    42

    $ declare -p val z
                     Show attributes and values
    declare -i val="11"
    declare -r z="42"

Name

dirs

Synopsis

    dirs [-clpv] [+n] [-n]

Bash only. Print the directory stack, which is managed with pushd and popd.

Options

+ n

Print the nth entry from the left; first entry is zero.

- n

Print the nth entry from the right; first entry is zero.

-c

Remove all entries from (clear) the directory stack.

-l

Produce a longer listing, one that does not replace $HOME with ~.

-p

Print the directory stack, one entry per line.

-v

Print the directory stack, one entry per line, with each entry preceded by its index in the stack.

Name

disown

Synopsis

    disown [-ahr] [job ...]

Bash version. Removes jobs from the list of jobs managed by Bash.

Options

-a

Remove all jobs. With -h, mark all jobs.

-h

Instead of removing jobs from the list of known jobs, mark them to not receive SIGHUP when Bash exits.

-r

With no jobs, remove (or mark) only running jobs.

Name

disown

Synopsis

    disown [job ...]

ksh93 version. When a login shell exits, do not send a SIGHUP to the given jobs. If no jobs are listed, no background jobs will receive SIGHUP.

Name

do

Synopsis

    do

Reserved word that precedes the command sequence in a for, while, until, or select statement.

Name

done

Synopsis

    done

Reserved word that ends a for, while, until, or select statement.

Name

echo

Synopsis

    echo [-eEn] [string]

Bash version, built-in to the shell. Write string to standard output. (See also echo in Chapter 2.)

Options

-e

Enable interpretation of the following escape sequences, which must be quoted (or escaped with a \) to prevent interpretation by the shell:

\a

Alert (ASCII BEL).

\b

Backspace.

\c

Suppress the terminating newline (same as -n).

\e

ASCII Escape character.

\f

Formfeed.

\n

Newline.

\r

Carriage return.

\t

Tab character.

\v

Vertical-tab character.

\\

Backslash.

\0 nnn

ASCII character represented by octal number nnn, where nnn is zero, one, two, or three digits and is preceded by a 0.

\ nnn

ASCII character represented by octal number nnn, where nnn is one, two, or three digits.

\x HH

ASCII character represented by hexadecimal number HH, where HH is one or two hexadecimal digits.

-E

Do not interpret escape sequences, even on systems where the default behavior of the built-in echo is to interpret them.

-n

Do not print the terminating newline.

Examples

$ echo "testing printer" | lp
    $echo "Warning: ringing bell \a"

Name

echo

Synopsis

    echo [-n] [string]

Korn shell version. Write string to standard output; if -n is specified, the output is not terminated by a newline. If no string is supplied, echo a newline.

The Korn shell's echo, even though it is built-in to the shell, emulates the system's version of echo. Thus, if the version found by a path search supports -n, the built-in version does too. Similarly, if the external version supports the escape sequences described below, the built-in version does too; otherwise it does not.[*] (See also echo in Chapter 2.) echo understands special escape characters, which must be quoted (or escaped with a \) to prevent interpretation by the shell:

\a

Alert (ASCII BEL).

\b

Backspace.

\c

Suppress the terminating newline (same as -n).

\f

Formfeed.

\n

Newline.

\r

Carriage return.

\t

Tab character.

\v

Vertical-tab character.

\\

Backslash.

\0 nnn

ASCII character represented by octal number nnn, where nnn is one, two, or three digits and is preceded by a 0.

[*] The situation with echo is a mess; consider using printf instead.

Name

enable

Synopsis

    enable [-adnps] [-f file] [command ...]

Bash only. Enable or disable shell built-in commands. Disabling a built-in lets you use an external version of a command that would otherwise use a built-in version, such as echo or test.

Options

-a

For use with -p; print information about all built-in commands, disabled and enabled.

-d

Remove (delete) a built-in previously loaded with -f.

-f file

Load a new built-in command command from the shared library file file.

-n

Disable the named built-in commands.

-p

Print a list of enabled built-in commands.

-s

Print only the POSIX special built-in commands. When combined with -f, the new built-in command becomes a POSIX special built-in.

Name

esac

Synopsis

    esac

Reserved word that ends a case statement.

Name

eval

Synopsis

    eval args

Typically, eval is used in shell scripts, and args is a line of code that contains shell variables. eval forces variable expansion to happen first and then runs the resulting command. This "double-scanning" is useful any time shell variables contain input/output redirection symbols, aliases, or other shell variables. (For example, redirection normally happens before variable expansion, so a variable containing redirection symbols must be expanded first using eval; otherwise, the redirection symbols remain uninterpreted.) See the C shell eval entry (Chapter 5 ) for another example.

Example

This fragment of a shell script shows how eval constructs a command that is interpreted in the right order:

    for option
    do
       case "$option" in   Define where output goes
          save) out=' > $newfile' ;;
          show) out=' | more' ;;
       esac
    done

    eval sort $file $out

Name

exec

Synopsis

    exec [command args ...]
    exec [-a name] [-cl] [command args ... ]

Execute command in place of the current process (instead of creating a new process). exec is also useful for opening, closing, or copying file descriptors. The second form is for ksh93 and Bash.

Options

-a

Use name for the value of argv[0].

-c

Clear the environment before executing the program.

-l

Place a minus sign at the front of argv[0], just as login(1) does. Bash only.

Examples

trap 'exec 2>&-' 0              Close standard error when
                                    shell script exits (signal 0)

    $ exec /bin/csh
                     Replace shell with C shell
    $ exec < infileReassign standard input to infile

Name

exit

Synopsis

    exit [n]

Exit a shell script with status n (e.g., exit 1). n can be 0 (success) or nonzero (failure). If n is not given, the shell's exit status is that of the most recent command. exit can be issued at the command line to close a window (log out). Exit statuses can range in value from 0 to 255.

Example

if [ $# -eq 0 ]
    then
       echo "Usage: $0 [-c] [-d] file(s)" 1>&2
       exit 1               # Error status
    fi

Name

export

Synopsis

    export [variables]
export [name=[value] ...]
    export -p
    export [-fn] [name=[value] ...]

Pass (export) the value of one or more shell variables, giving global meaning to the variables (which are local by default). For example, a variable defined in one shell script must be exported if its value is used in other programs called by the script. If no variables are given, export lists the variables exported by the current shell. The second form is the POSIX version, which is similar to the first form except that you can set a variable name to a value before exporting it. The third form is not available in ksh88. The fourth form is specific to Bash.

Options

-f

Names refer to functions; the functions are exported in the environment. Bash only.

-n

Remove the named variables or functions from the environment. Bash only.

-p

Print export before printing the names and values of exported variables. This allows saving a list of exported variables for rereading later.

Examples

In the original Bourne shell, you would type:

    TERM=vt100
    export TERM

In Bash and the Korn shell, you could type this instead:

    export TERM=vt100

Name

false

Synopsis

    false

ksh88 alias for let 0. Built-in command in Bash and ksh93 that exits with a false return value.

Name

fc

Synopsis

    fc [options] [first [last]]
    fc -e - [old=new] [command]
    fc -s [old=new] [command]

ksh88 and Bash. Display or edit commands in the history list. (Use only one of -e, -l or -s.) first and last are numbers or strings specifying the range of commands to display or edit. If last is omitted, fc applies to a single command (specified by first). If both first and last are omitted, fc edits the previous command or lists the last 16. The second form of fc takes a history command, replaces old with new, and executes the modified command. If no strings are specified, command is just reexecuted. If no command is given either, the previous command is reexecuted. command is a number or string like first. See the examples in the earlier section "Command History." The third form, available in Bash and ksh93, is equivalent to the second form.

Options

-e [ editor ]

Invoke editor to edit the specified history commands. The default editor is set by the shell variable FCEDIT. If that variable is not set, the default is /bin/ed. (Bash defaults to vi; version 3.1 and newer will default to /bin/ed when in POSIX mode.) Bash tries FCEDIT, then EDITOR, and then /bin/ed.

-e -

Execute (or redo) a history command; refer to second syntax line above.

-l

List the specified command or range of commands, or list the last 16.

-n

Suppress command numbering from the -l listing.

-r

Reverse the order of the -l listing.

-s

Equivalent to -e -. Not in ksh88.

Name

fc

Synopsis

    fc

ksh93 alias for hist.

Name

fg

Synopsis

    fg [jobIDs]

Bring current job or jobIDs to the foreground. See the earlier section "Job Control."

Name

fi

Synopsis

    fi

Reserved word that ends an if statement. (Don't forget to use it!)

Name

for

Synopsis

    for x [in list]do
     commands
    done

For variable x (in optional list of values) do commands. If in list is omitted, "$@" (the positional parameters) is assumed.

Examples

Paginate files specified on the command line; save each result:

    for file; do
         pr $file > $file.tmp
    done

Same, but put entire loop into the background:

    for file; do
         pr $file > $file.tmp
    done &

Search chapters for a list of words (like fgrep -f):

    for item in 'cat program_list'
    do
         echo "Checking chapters for"
         echo "references to program $item..."
         grep -c "$item.[co]" chap*
    done

Extract a one-word title from each file and use as new filename:

    for file
    do
         name='sed -n 's/NAME: //p' $file'
         mv $file $name
    done

Name

for

Synopsis

    for ((init; cond; incr))
    do
     commands
    done

Bash and ksh93 . Arithmetic for loop, similar to C's. Evaluate init. While cond is true, execute the body of the loop. Evaluate incr before retesting cond. Any one of the expressions may be omitted; a missing cond is treated as being true.

Example

Search for a phrase in each odd chapter:

    for ((x=1; x <= 20; x += 2))
    do
            grep $1 chap$x
    done

Name

function

Synopsis

    function name { commands; }
    function name () { commands; }

Define name as a shell function. See the description of semantic issues in the earlier section "Functions." The first form is for the Korn shell, although it may also be used with Bash. The second form is specific to Bash. Bash does not give different semantics to functions declared differently; all Bash functions behave the same way.

Example

Define a function to count files.

    $ function fcount {
    >    ls | wc -l
    >}

Name

functions

Synopsis

    functions

Korn shell alias for typeset -f. (Note the "s" in the name; function is a Korn shell keyword.) See typeset later in this listing.

Name

getconf

Synopsis

    getconf [name [path]]

ksh93 only. Retrieve the values for parameters that can vary across systems. name is the parameter to retrieve; path is a filename to test for parameters that can vary on different filesystem types.

The parameters are defined by the POSIX 1003.1 standard. See the entry for getconf in Chapter 2.

Example

Print the maximum value that can be held in a C int.

    $ getconf INT_MAX
    2147483647

Name

getopts

Synopsis

    getopts [-a name] string name [args]

Process command-line arguments (or args, if specified) and check for legal options. getopts is used in shell script loops and is intended to ensure standard syntax for command-line options. Standard syntax dictates that command-line options begin with a -. Options can be stacked; i.e., consecutive letters can follow a single -. End processing of options by specifying -- on the command line. string contains the option letters to be recognized by getopts when running the shell script. Valid options are processed in turn and stored in the shell variable name. If an option is followed by a colon, the option must be followed by one or more arguments. (Multiple arguments must be given to the command as one shell word. This is done by quoting the arguments or separating them with commas. The application must be written to expect multiple arguments in this format.) getopts uses the shell variables OPTARG and OPTIND. The Bash version also uses OPTERR.

Option

-a

Use name in error messages about invalid options. ksh93 only.

Name

hash

Synopsis

    hash [-dlrt] [-p file] [commands]

Bash version. As the shell finds commands along the search path ($PATH), it remembers the found location in an internal hash table. The next time you enter a command, the shell uses the value stored in its hash table.

With no arguments, hash lists the current hashed commands. The display shows hits (the number of times the command has been called by the shell) and the command name.

With commands, the shell adds those commands to the hash table.

Options

-d

Remove (delete) just the specified commands from the hash table.

-l

Produce output in a format that can be reread to rebuild the hash table.

-p file

Associate file with command in the hash table.

-r

Remove all commands from the hash table.

-t

With one name, print the full pathname of the command. With more than one name, print the name and the full path, in two columns.

Besides the -r option, the hash table is also cleared when PATH is assigned. Use PATH=$PATH to clear the hash table without affecting your search path. This is most useful if you have installed a new version of a command in a directory that is earlier in $PATH than the current version of the command.

Name

hash

Synopsis

    hash

Korn shell alias for alias -t (alias -t -- in ksh93). Approximates the Bourne shell's hash.

Name

help

Synopsis

    help [-s] [pattern]

Bash only. Print usage information on standard output for each command that matches pattern. The information includes descriptions of each command's options. With the -s option, print only brief usage information.

Examples

$ help -s cd
                     Short help
    cd: cd [-L|-P] [dir]

    $ help true
                     Full help
    true: true
        Return a successful result.

Name

hist

Synopsis

    hist [options] [first [last]]
    hist -s [old=new] [command]

ksh93 only. Display or edit commands in the history list. (Use only one of -l or -s.) first and last are numbers or strings specifying the range of commands to display or edit. If last is omitted, hist applies to a single command (specified by first). If both first and last are omitted, hist edits the previous command or lists the last 16. The second form of hist takes a history command, replaces old with new, and executes the modified command. If no strings are specified, command is just reexecuted. If no command is given either, the previous command is reexecuted. command is a number or string like first. See the examples in the earlier section "Command History."

Options

-e [ editor ]

Invoke editor to edit the specified history commands. The default editor is set by the shell variable HISTEDIT. If that variable is not set, FCEDIT is used. If neither is set, the default is /bin/ed.

-l

List the specified command or range of commands, or list the last 16.

-n

Suppress command numbering from the -l listing.

-N n

Start with the command n commands before the current one.

-r

Reverse the order of the -l listing.

-s

Execute (or redo) a history command; refer to second syntax line above.

Name

history

Synopsis

    history [count]
    history [options]

Bash version. Print commands in the history list or manage the history file. With no options or arguments, display the history list with command numbers. With a count argument, print only that many of the most recent commands.

Options

-a

Append new history lines (those executed since the beginning of the session) to the history file.

-c

Clear the history list (remove all entries).

-d position

Delete the history item at position position.

-n

Read unread history lines from the history file into the history list.

-p argument ...

Perform csh-style history expansion on each argument, printing the results to standard output. The results are not saved in the history list.

-r

Read the history file and replace the history list with its contents.

-s argument ...

Store the arguments in the history list, as a single entry.

-w

Write the current history list to the history file, overwriting it entirely.

Name

history

Synopsis

    history

ksh88 alias for fc -l. ksh93 alias for hist -l. Show the last 16 commands.

Name

if

Synopsis

    if condition1
    then commands1
    [ elif condition2
     then commands2 ]
     .
     .
     .
    [ else commands3 ]
    fi

If condition1 is met, do commands1; otherwise, if condition2 is met, do commands2; if neither is met, do commands3. Conditions are often specified with the test and [[ ]] commands. See test and [[ ]] for a full list of conditions, and see additional Examples under : and exit.

Examples

Insert a 0 before numbers less than 10:

    if [ $counter -lt 10 ]
    then number=0$counter
    else number=$counter
    fi

Make a directory if it doesn't exist:

    if [ ! -d $dir ]; then
       mkdir $dir
       chmod 775 $dir
    fi

Name

integer

Synopsis

    integer

Korn shell alias for typeset -i. Specify integer variables.

Name

jobs

Synopsis

    jobs [options] [jobIDs]

List all running or stopped jobs, or list those specified by jobIDs. For example, you can check whether a long compilation or text format is still running. Also useful before logging out. See the earlier section "Job Control."

Options

-l

List job IDs and process group IDs.

-n

List only jobs whose status changed since last notification.

-p

List process group IDs only.

-r

List running jobs only. Bash only.

-x cmd

Replace each job ID found in cmd with the associated process ID and then execute cmd. Bash only.

Name

kill

Synopsis

    kill [options]IDs

Terminate each specified process ID or job ID. You must own the process or be a privileged user. This built-in is similar to the external kill command described in Chapter 2 but also allows symbolic job names. See the kill entry in Chapter 2 for a list of commonly available signals and for the header files where the corresponding signal numbers may be found. Stubborn processes can be killed using signal 9. See the earlier section "Job Control."

Options

-l

List the signal names. (Used by itself.)

-n num

Send the given signal number. Not ksh88.

-s name

Send the given signal name. Not ksh88.

- signal

The signal number (from <signal.h>) or name (from kill -l). With a signal number of 9, the kill is absolute.

Name

let

Synopsis

    let expressions
            or
    ((expressions))

Perform arithmetic as specified by one or more expressions. expressions consist of numbers, operators, and shell variables (which don't need a preceding $). Expressions must be quoted if they contain spaces or other special characters. The (()) form does the quoting for you. For more information and examples, see the section "Arithmetic Expressions," earlier in this chapter. See also expr in Chapter 2.

Examples

Each of these examples adds 1 to variable i:

    i='expr $i + 1'         All Bourne shells
    let i=i+1               Bash
, ksh

    let "i = i + 1"
    (( i = i + 1 ))
    (( i += 1 ))
    (( i++ ))Bash, ksh93

Name

local

Synopsis

    local [options] [name[=value]]

Bash only. Declares local variables for use inside functions. The options are the same as those accepted by declare; see declare for the full list. It is an error to use local outside a function body.

Name

login

Synopsis

    login [user]

Korn shell only. The shell does an execve(2) of the standard login program, allowing you to replace one login session with another, without having to logout first.

Name

logout

Synopsis

    logout

Bash only. Exit a login shell. The command fails if the current shell is not a login shell.

Name

nameref

Synopsis

    nameref newvar=oldvar ...

ksh93 alias for typeset -n. See the discussion of indirect variables in the section "Variables," earlier in this chapter.

Name

nohup

Synopsis

    nohup command [arguments] &

Don't terminate a command after logout . nohup is a Korn shell alias:

    nohup='nohup '

The embedded space at the end lets the shell interpret the following command as an alias, if needed.

Name

popd

Synopsis

    popd [-n] [+count] [-count]

Bash only. Pop the top directory off the directory stack (as shown by the dirs command), and change to the new top directory, or manage the directory stack.

Options

-n

Don't change to the new top directory, just manipulate the stack.

+ count

Remove the item count entries from the left, as shown by dirs. Counting starts at zero. No directory change occurs.

-count

Remove the item count entries from the right, as shown by dirs. Counting starts at zero. No directory change occurs.

Name

print

Synopsis

    print [options] [string ...]

Korn shell only. Display string (on standard output by default). print includes the functions of echo and can be used in its place on most Unix systems.

Options

-

Ignore all subsequent options.

--

Same as -.

-e

Interpret escape sequences in argument strings. (This is the default, anyway.) Use it to undo an earlier -r in the same command line. ksh93 only.

-f format

Print like printf, using format as the format string. Ignores the -n, -r, and -R options. ksh93 only.

-n

Don't end output with a newline.

-p

Send string to the process created by |&, instead of to standard output.

-r

Ignore the escape sequences often used with echo.

-R

Same as -r and ignore subsequent options (except -n).

-s

Send string to the history file.

-u [ n ]

Send string to file descriptor n (default is 1).

Name

printf

Synopsis

    printf format [val ...]

Not ksh88. Formatted printing, like the ANSI C printf function.

Additional Format Letters

Both Bash and ksh93 accept additional format letters. Bash only provides %b and %q, while ksh93 provides all those in the following list.

%b

Expand escape sequences in strings (e.g., \t to tab, and so on).

%B

The corresponding argument is a variable name (typically created via typeset -b); its value is retrieved and printed.

%d

An additional period and the output base can follow the precision (e.g., %5.3.6d to produce output in base 6).

%H

Output strings in HTML/XML format. (Spaces become &nbsp; and < and > become &lt; and &gt;.)

%n

Place the number of characters printed so far into the named variable.

%P

Translate egrep extended regular expression into ksh pattern.

%q

Print a quoted string that can be reread later on.

%R

Reverse of %P: translate ksh pattern into egrep extended regular expression.

%( format )T

Print a string representing a date and time according to the strftime(3) format format. The parentheses are entered literally. See the Examples.

%Z

Print an ASCII NUL (8 zero bits).

Examples

$ date
                     Reformat date/time
    Tue Sep  7 15:39:42 EDT 2004
    $ printf "%(It is now %m/%d/%Y %H:%M:%S)T\n" "$(date)"
    It is now 09/07/2004 15:40:10

    $ printf "%H\n" "Here is a <string>"
                     Convert to HTML
    Here&nbsp;is&nbsp;a&nbsp;&lt;string&gt;

Name

pwd

Synopsis

    pwd [-LP]

Print your present working directory on standard output.

Options

Options give control over the use of logical versus physical treatment of the printed path. See also the entry for cd, earlier in this section.

-L

Use logical path (what the user typed, including any symbolic links) and the value of PWD for the current directory. This is the default.

-P

Use the actual filesystem physical path for the current directory.

Name

pushd

Synopsis

    pushd [-n] [directory]
    pushd [-n] [+count] [-count]

Bash only. Add directory to the directory stack, or rotate the directory stack. With no arguments, swap the top two entries on the stack, and change to the new top entry.

Options

-n

Don't change to the new top directory, just manipulate the stack.

+ count

Rotate the stack so that the count'th item from the left, as shown by dirs, is the new top of the stack. Counting starts at zero. The new top becomes the current directory.

-count

Rotate the stack so that the count'th item from the left, as shown by dirs, is the new top of the stack. Counting starts at zero. The new top becomes the current directory.

Name

r

Synopsis

    r

ksh88 alias for fc -e -. ksh93 alias for hist -s. Reexecute previous command.

Name

read

Synopsis

    read [options] [variable1[?string]] [variable2 ...]

Read one line of standard input and assign each word to the corresponding variable, with all leftover words assigned to the last variable. If only one variable is specified, the entire line is assigned to that variable. See the Examples here and under case. The return status is 0 unless EOF is reached. Both Bash and the Korn shell support options, as shown below. If no variables are given, input is stored in the REPLY variable.

Additionally, the Korn shell version supports the ? syntax for prompting. If the first variable is followed by ? string, string is displayed as a user prompt.

Options

-a array

Read into indexed array array. Bash only.

-A array

Read into indexed array array. ksh93 only.

-d delim

Read up to first occurrence of delim, instead of newline. Not ksh88.

-e

Use the readline library if reading from a terminal. Bash only.

-n count

Read at most count bytes. Not ksh88.

-p prompt

Bash: print prompt before reading input.

-p

Korn shell: read from the output of a |& coprocess.

-r

Raw mode; ignore \ as a line-continuation character.

-s

Bash: read silently; characters are not echoed.

-s

Korn shell: save input as a command in the history file.

-t timeout

When reading from a terminal or pipe, if no data is entered after timeout seconds, return 1. This prevents an application from hanging forever, waiting for user input. Not ksh88.

-u [ n ]

Read input from file descriptor n (default is 0).

Examples

Read three variables:

    $ read first last address
                     Sarah Caldwell 123 Main Street

    $ echo "$last, $first\n$address"
    Caldwell, Sarah
    123 Main Street

Prompt yourself to enter two temperatures, Korn shell version:

    $ read n1?"High low: " n2
    High low:65 33

Name

readonly

Synopsis

    readonly [-afp] [variable[=value] ...]

Prevent the specified shell variables from being assigned new values. An initial value may be supplied using the assignment syntax, but that value may not be changed subsequently.

Options

ksh88 does not accept options for this command.

-a

Each variable must refer to an array. Bash only.

-f

Each variable must refer to an function. Bash only.

-p

Print readonly before printing the names and values of read-only variables. This allows saving a list of read-only variables for rereading later.

Name

redirect

Synopsis

    redirect i/o-redirection ...

ksh93 alias for command exec.

Example

Change the shell's standard error to the console:

    $ redirect 2>/dev/console

Name

return

Synopsis

    return [n]

Use inside a function definition. Exit the function with status n or with the exit status of the previously executed command.

Name

select

Synopsis

    select x [in list]
    do
     commands
    done

Display a list of menu items on standard error, numbered in the order they are specified in list. If no in list is given, items are taken from the command line (via "$@"). Following the menu is a prompt string (set by PS3). At the PS3 prompt, users select a menu item by typing its number, or they redisplay the menu by pressing the ENTER key. User input is stored in the shell variable REPLY. If a valid item number is typed, commands are executed. Typing EOF terminates the loop.

Example

PS3="Select the item number: "
    select event in Format Page View Exit
    do
       case "$event" in
         Format) nroff $file | lp;;
         Page)   pr $file | lp;;
         View)   more $file;;
         Exit)   exit 0;;
         *   )   echo "Invalid selection";;
       esac
    done

The output of this script looks like this:

    1. Format
    2. Page
    3. View
    4. Exit
    Select the item number:

Name

set

Synopsis

    set [options arg1 arg2 ...]

With no arguments, set prints the values of all variables known to the current shell. Options can be enabled (- option) or disabled (+option). Options can also be set when the shell is invoked. (See the earlier section "Invoking the Shell.") Arguments are assigned in order to $1, $2, etc.

Options

There is a large set of overlapping options amongst ksh88, ksh93, and Bash. To minimize confusion, the following list includes every option. The table provided after the list summarizes which options are available in which shells.

-a

From now on automatically mark variables for export after defining or changing them.

+A name

Assign remaining arguments as elements of array name. Korn shell only.

-A name

Same as +A, but unset name before making assignments. Korn shell only.

-b

Print job completion messages as soon as jobs terminate; don't wait until the next prompt. Not ksh88.

-B

Enable brace expansion. On by default. Bash only.

-C

Prevent overwriting via > redirection; use >| to overwrite files. Not ksh88.

-e

Exit if a command yields a nonzero exit status. The ERR trap executes before the shell exits.

-E

Cause shell functions, command substitutions, and subshells to inherit the ERR trap. Bash only.

-f

Ignore filename metacharacters (e.g., * ? [ ]).

-G

Cause ** to also match subdirectories during filename expansion. ksh93 only.

-h

Locate commands as they are defined. The Korn shell creates tracked aliases, whereas Bash hashes command names. On by default. See hash.

-H

Enable csh-style history substitution. On by default. Bash only.

-k

Assignment of environment variables (var=value) takes effect regardless of where they appear on the command line. Normally, assignments must precede the command name.

-m

Enable job control; background jobs execute in a separate process group. -m is usually set automatically.

-n

Read commands but don't execute; useful for checking syntax. Both shells ignore this option if interactive.

+o [ mode ]

With mode, disable the given shell option. Plain set +o prints the settings of all the current options. For Bash and ksh93, this is in a form that can be reread by the shell later.

-o [ mode ]

List shell modes, or turn on mode mode. Many modes can be set by other options. Modes are:

allexport

Same as -a.

bgnice

Run background jobs at lower priority. Korn shell only.

braceexpand

Same as -B. Bash only.

emacs

Set command-line editor to emacs.

errexit

Same as -e.

errtrace

Same as -E. Bash only.

functrace

Same as -T. Bash only.

globstar

Same as -G. ksh93 only.

gmacs

Set command-line editor to gmacs (like GNU Emacs). Korn shell only.

hashall

Same as -h. Bash only.

histexpand

Same as -H. Bash only.

history

Enable command history. On by default. Bash only.

ignoreeof

Don't process EOF signals. To exit the shell, type exit.

keyword

Same as -k.

markdirs

Append / to directory names. Korn shell only.

monitor

Same as -m.

noclobber

Same as -C.

noexec

Same as -n.

noglob

Same as -f.

nolog

Omit function definitions from history file. Accepted but ignored by Bash.

notify

Same as -b.

nounset

Same as -u.

onecmd

Same as -t. Bash only.

physical

Same as -P. Bash only.

pipefail

Change pipeline exit status to be that of the rightmost command that failed, or zero if all exited successfully. Not ksh88.

posix

Change to POSIX mode. Bash only.

privileged

Same as -p.

trackall

Same as -h. Korn shell only.

verbose

Same as -v.

vi

Set command-line editor to vi.

viraw

Same as vi, but process each character when it's typed. Korn shell only.

xtrace

Same as -x.

+p

Reset effective UID to real UID.

-p

Start up as a privileged user. Bash: don't read $ENV or $BASH_ENV, don't import functions from the environment, and ignore the value of $SHELLOPTS. Korn shell: don't process $HOME/.profile; read /etc/suid_profile instead of $ENV.

-P

Always use physical paths for cd and pwd. Bash only.

-s

Sort the positional parameters. Korn shell only.

-t

Exit after one command is executed.

-T

Cause shell functions, command substitutions, and subshells to inherit the DEBUG trap. Bash only.

-u

In substitutions, treat unset variables as errors.

-v

Show each shell command line when read.

-x

Show commands and arguments when executed, preceded by the value of PS4. This provides step-by-step tracing of shell scripts.

-

Turn off -v and -x, and turn off option processing. Included for compatibility with older versions of the Bourne shell.

--

Used as the last option; -- turns off option processing so that arguments beginning with - are not misinterpreted as options. (For example, you can set $1 to -1.) If no arguments are given after --, unset the positional parameters.

Option Availability Summary

Option

Same as

ksh88

ksh93

Bash

-a

-o allexport

·

·

·

-A

·

·

-b

-o notify

·

·

-B

-o braceexpand

·

-C

-o noclobber

·

·

-e

-o errexit

·

·

·

-E

-o errtrace

·

-f

-o noglob

·

·

·

-G

-o globstar

·

-h

-o hashall

·

-h

-o trackall

·

·

-H

-o histexpand

·

-k

-o keyword

·

·

·

-m

-o monitor

·

·

·

-n

-o noexec

·

·

·

-o allexport

-a

·

·

·

-o bgnice

·

·

-o braceexpand

-B

·

-o emacs

·

·

·

-o errexit

-e

·

·

·

-o errtrace

-E

·

-o functrace

-T

·

-o globstar

-G

·

-o gmacs

·

·

-o hashall

-h

·

-o history

·

-o histexpand

-H

·

-o ignoreeof

·

·

·

-o keyword

-k

·

·

·

-o markdirs

·

·

-o monitor

-m

·

·

·

-o noclobber

-C

·

·

·

-o noexec

-n

·

·

·

-o noglob

-f

·

·

·

-o nolog

·

·

·

-o notify

-b

·

·

-o nounset

-u

·

-o onecmd

-t

·

-o physical

-P

·

-o pipefail

·

·

-o posix

·

-o privileged

-p

·

·

·

-o trackall

-h

·

·

-o verbose

-v

·

·

·

-o vi

·

·

·

-o viraw

·

·

-o xtrace

-x

·

·

·

-p

-o privileged

·

·

·

-P

-o physical

·

-s

·

·

-t

-o onecmd

·

·

·

-T

-o functrace

·

-u

-o nonunset

·

·

·

-v

-o verbose

·

·

·

-x

-o xtrace

·

·

·

Examples

    set -- "$num" -20 -30   Set $1 to $num, $2 to -20, $3 to -30
    set -vx                 Read each command line; show it;
                            execute it; show it again (with arguments)
    set +x                  Stop command tracing
    set -o noclobber        Prevent file overwriting
    set +o noclobberAllow file overwriting again

Name

shopt

Synopsis

    shopt [-opqsu] [option]

Bash only. Sets or unsets shell options. With no options or just -p, prints the names and settings of the options.

Options

-o

Each option must be one of the shell option names for set -o, instead of the options listed in the next section.

-p

Print the option settings as shopt commands that can be reread later.

-q

Quiet mode. The exit status is zero if the given option is set, nonzero otherwise. With multiple options, all of them must be set for a zero exit status.

-s

Set the given options. With no options, prints only those that are set.

-u

Unset the given options. With no options, prints only those that are unset.

Settable Shell Options

The following descriptions describe the behavior when set. Options marked with a dagger (|) are enabled by default.

cdable_vars

Treat a nondirectory argument to cd as a variable whose value is the directory to go to.

cdspell

Attempt spelling correction on each directory component of an argument to cd. Allowed in interactive shells only.

checkhash

Check that commands found in the hash table still exist before attempting to use them. If not, perform a normal PATH search.

checkwinsize

Check the window size after each command and update LINES and COLUMNS if the size has changed.

cmdhist †

Save all lines of a multiline command in one history entry. This permits easy re-editing of multiline commands.

dotglob

Include filenames starting with a period in the results of filename expansion.

execfail

Do not exit a noninteractive shell if the command given to exec cannot be executed. Interactive shells do not exit in such a case, no matter the setting of this option.

expand_aliases †

Expand aliases created with alias. Disabled in noninteractive shells.

extdebug

Enable behavior needed for debuggers:

declare -F displays the source filename and line number for each function name argument.

When a command run by the DEBUG trap fails, the next command is skipped.

When a command run by the DEBUG trap inside a shell function or script sourced with . (dot) or source returns with an exit status of 2, the shell simulates a call to return.

BASH_ARGC and BASH_A RGV are set as described earlier.

Function tracing is enabled. Command substitutions, shell functions, and subshells invoked via (...) inherit the DEBUG and RETURN traps.

Error tracing is enabled. Command substitutions, shell functions and subshells invoked via (...) inherit the ERROR trap.

extglob

Enable extended pattern matching facilities such as +(...). (These were not in the Bourne shell and are not in POSIX; thus Bash requires you to enable them if you want them.)

extquote †

Allow $'...' and $"..." within ${ variable } expansions inside double quotes.

failglob

Cause patterns that do not match filenames to produce an error.

force_fignore †

When doing completion, ignore words matching the list of suffixes in FIGNORE, even if such words are the only possible completions.

gnu_errfmt

Print error messages in the standard GNU format.

histappend

Append the history list to the file named by HISTFILE upon exit, instead of overwriting the file.

histreedit

Allow a user to re-edit a failed csh-style history substitution with the readline library.

histverify

Place the results of csh-style history substitution into the readline library's editing buffer, in case the user wishes to modify it further, instead of executing it directly.

hostcomplete †

If using readline, attempt hostname completion when a word containing an @ is being completed.

huponexit

Send a SIGHUP to all running jobs upon exiting an interactive shell.

interactive_comments †

Allow words beginning with # to start a comment in an interactive shell.

lithist

If cmdhist is also set, save mutliline commands to the history file with newlines instead of semicolons.

login_shell

Set by the shell when it is a login shell. This is a read-only option.

mailwarn

Print the message The mail in mailfile has been read when a file being checked for mail has been accessed since the last time Bash checked it.

no_empty_cmd_completion

If using readline, do not search $PATH when a completion is attempted on an empty line.

nocaseglob

Ignore letter case when doing filename matching.

nullglob

Expand patterns that do not match any files to the null string, instead of using the literal pattern as an argument.

progcomp †

Enable programmable completion.

promptvars †

Perform variable, command, and arithmetic substitution on the values of PS1, PS2 and PS4.

restricted_shell

Set by the shell when it is a restricted shell. This is a read-only option.

shift_verbose

Causes shift to print an error message when the shift count is greater than the number of positional parameters.

sourcepath †

Causes the . (dot) and source commands to search $PATH in order to find the file to read and execute.

xpg_echo

Causes echo to expand escape sequences, even without the -e or -E options.

Name

shift

Synopsis

    shift [n]

Shift positional arguments (e.g., $2 becomes $1). If n is given, shift to the left n places. Used in while loops to iterate through command-line arguments. In the Korn shell, n can be an integer expression.

Examples

shift $1+$6              Korn shell: use expression result as shift count

    shift $(($1 + $6))Same, portable to any POSIX shell

Name

sleep

Synopsis

    sleep [n]

ksh93 only. Sleep for n seconds. n can have a fractional part.

Name

source

Synopsis

    source file [arguments]

Bash only. Identical to the . (dot) command; see that entry.

Name

stop

Synopsis

    stop [jobIDs]

ksh88 alias for kill -STOP. ksh93 alias for kill -s STOP. Suspend the background job specified by jobIDs; this is the complement of CTRL-Z or suspend. See the earlier section "Job Control."

Name

suspend

Synopsis

    suspend [-f]

Suspend the current shell. Often used to stop an su command. In ksh88, suspend is an alias for kill -STOP $$. In ksh93, it is an alias for kill -s STOP $$. In Bash, it is a built-in command.

Option

-f

Force the suspension, even if the shell is a login shell. Bash only.

Name

test

Synopsis

    test condition
             or
    [ condition ]
             or
    [[ condition ]]

Evaluate a condition and, if its value is true, return a zero exit status; otherwise, return a nonzero exit status. An alternate form of the command uses [ ] rather than the word test. An additional alternate form uses [[ ]], in which case word splitting and pathname expansion are not done. (See the [[ ]] entry.) condition is constructed using the following expressions. Conditions are true if the description holds true. Features that are specific to Bash are marked with a (B). Features that are specific to the Korn shell are marked with a (K). Features that are specific to ksh93 are marked with a (K93).

File Conditions

-a file

file exists.

-b file

file exists and is a block special file.

-c file

file exists and is a character special file.

-C file

(K) file exists and is a contiguous file. This facility is not available on most Unix systems.

-d file

file exists and is a directory.

-f file

file exists and is a regular file.

-g file

file exists, and its set-group-id bit is set.

-G file

file exists, and its group is the effective group ID.

-h file

file exists and is a symbolic link.

-k file

file exists, and its sticky bit is set.

-L file

file exists and is a symbolic link.

-N file

(B) file exists and was modified after it was last read.

-O file

file exists, and its owner is the effective user ID.

-p file

file exists and is a named pipe (FIFO).

-r file

file exists and is readable.

-s file

file exists and has a size greater than zero.

-S file

file exists and is a socket.

-t [ n ]

The open file descriptor n is associated with a terminal device; default n is 1.

-u file

file exists, and its set-user-id bit is set.

-w file

file exists and is writable.

-x file

file exists and is executable.

f1 -ef f2

Files f1 and f2 are linked (refer to same file).

f1 -nt f2

File f1 is newer than f2.

f1 -ot f2

File f1 is older than f2.

String Conditions

string

string is not null.

-n s1

String s1 has nonzero length.

-z s1

String s1 has zero length.

s1 = s2

(K) Strings s1 and s2 are identical. s2 can be a wildcard pattern. Quote s2 to treat it literally. (See the section "Filename Metacharacters" earlier in this chapter.)

s1 == s2

(B, K93) Strings s1 and s2 are identical. s2 can be a wildcard pattern. Quote s2 to treat it literally. Preferred over =.

s1 != s2

Strings s1 and s2 are not identical. s2 can be a wildcard pattern. Quote s2 to treat it literally.

s1 =~ s2

(B) String s1 matches extended regular expression s2. Quote s2 to keep the shell from expanding embedded shell metacharacters. Strings matched by parenthesized subexpressions are placed into elements of the BASH_REMATCH array. See the description of BASH_REMATCH in the "Built-in Shell Variables" section earlier in this chapter.

s1 < s2

ASCII value of s1 precedes that of s2. (Valid only within [[ ]] construct.)

s1 > s2

ASCII value of s1 follows that of s2. (Valid only within [[ ]] construct.)

Internal Shell Conditions

-o opt

Option opt for set -o is on.

Integer Comparisons

n1 -eq n2

n1 equals n2.

n1 -ge n2

n1 is greater than or equal to n2.

n1 -gt n2

n1 is greater than n2.

n1 -le n2

n1 is less than or equal to n2.

n1 -lt n2

n1 is less than n2.

n1 -ne n2

n1 does not equal n2.

Combined Forms

( condition )

True if condition is true (used for grouping). For test and [ ], the ()s should be quoted by a \. The form using [[ ]] doesn't require quoting the parentheses.

! condition

True if condition is false.

condition1 -a condition2

True if both conditions are true.

condition1 && condition2

True if both conditions are true. (Valid only within [[ ]] construct.)

condition1 -o condition2

True if either condition is true.

condition1 || condition2

True if either condition is true. (Valid only within [[ ]] construct.)

Examples

The following examples show the first line of various statements that might use a test condition:

    while test $# -gt 0             While there are arguments...
    while [ -n "$1" ]               While there are nonempty
                     arguments...
    if [ $count -lt 10 ]            If $count is less than 10...
    if [ -d RCS ]                   If the RCS directory exists...
    if [ "$answer" != "y" ]         If the answer is not y...
    if [ ! -r "$1" -o ! -f "$1" ]   If the first argument is not areadable file or a regular file...

Name

time

Synopsis

    time command
    time [command]

Execute command and print the total elapsed time, user time, and system time (in seconds). Same as the Unix command time (see Chapter 2), except that the built-in version can also time other built-in commands as well as all commands in a pipeline.

The second form applies to ksh93; with no command, the total user and system times for the shell, and all children are printed.

Name

times

Synopsis

    times

Print accumulated process times for user and system.

Name

times

Synopsis

    times

ksh93 alias for { {time;} 2>&1;}. See also time.

Name

trap

Synopsis

    trap [ [commands] signals]
    trap -p
    trap -l

Execute commands if any signals are received. The second form is specific to Bash and ksh93; it prints the current trap settings in a form suitable for rereading later. The third form is specific to Bash; it lists all signals and their numbers, like kill -l.

Common signals include EXIT (0), HUP (1), INT (2), and TERM (15). Multiple commands must be quoted as a group and separated by semicolons internally. If commands is the null string (i.e., trap "" signals), signals are ignored by the shell. If commands are omitted entirely, reset processing of specified signals to the default action. Bash and ksh93: if commands is "-", reset signals to their initial defaults.

If both commands and signals are omitted, list current trap assignments. See the Examples here and in exec.

Signals

A list of signal names, numbers, and meanings were given earlier, in the kill entry in Chapter 2. The shells allow you to use either the signal number, or the signal name (without the SIG prefix). In addition, the shells support "pseudo-signals," signal names or numbers that aren't real operating system signals but which direct the shell to perform a specific action. These signals are:

DEBUG

Execution of any command.

ERR

Nonzero exit status.

EXIT

Exit from shell (usually when shell script finishes).

0

Same as EXIT, for historical compatibility with the Bourne shell.

KEYBD

A key has been read in emacs, gmacs, or vi editing mode. ksh93 only.

RETURN

A return is executed, or a script run with . (dot) or source finishes. Bash only.

Examples

trap "" INT     Ignore interrupts (signal 2)
    trap INTObey interrupts again

Remove a $tmp file when the shell program exits, or if the user logs out, presses CTRL-C, or does a kill:

    trap "rm -f $tmp; exit" EXIT HUP INT TERM     POSIX style
    trap "rm -f $tmp; exit" 0 1 2 15Pre-POSIX Bourne shell style

Print a "clean up" message when the shell program receives signals SIGHUP, SIGINT, or SIGTERM:

    trap 'echo Interrupt!  Cleaning up...' HUP INT TERM

Name

true

Synopsis

    true

ksh88 alias for :. Bash and ksh93 built-in command that exits with a true return value.

Name

type

Synopsis

    type [-afpPt] commands

Bash version. Show whether each command name is a Unix command, a built-in command, an alias, a shell keyword, or a defined shell function.

Options

-a

Print all locations in $PATH that include command, including aliases and functions. Use -p together with -a to suppress aliases and functions.

-f

Suppress function lookup, as with command.

-p

If type -t would print file for a given command, this option prints the full pathname for the executable files. Otherwise, it prints nothing.

-P

Like -p, but force a PATH search, even if type -t would not print file.

-t

Print a word describing each command. The word is one of alias, builtin, file, function, or keyword, depending upon the type of each command.

Example

$ type mv read if
    mv is /bin/mv
    read is a shell builtin
    if is a shell keyword

Name

type

Synopsis

    type commands

Korn shell alias for whence -v.

Name

typeset

Synopsis

    typeset [options] [variable[=value ...]]
    typeset -p

In Bash, identical to declare. See declare.

In the Korn shell, assign a type to each variable (along with an optional initial value), or, if no variables are supplied, display all variables of a particular type (as determined by the options). When variables are specified, - option enables the type and +option disables it. With no variables, - option prints variable names and values; +option prints only the names.

The second form shown is specific to ksh93.

Options

-A arr

arr is an associative array. ksh93 only.

-b

The variable can hold any data, including binary data. References retrieve the value printed in base-64 notation; The %B format with printf may be used to print the value. ksh93 only.

-E d

variable is a floating-point number. d is the number of decimal places. The value is printed using printf%g format. ksh93 only.

-f [ c ]

The named variable is a function; no assignment is allowed. If no variable is given, list current function names. Flag c can be t, u, or x. t turns on tracing (same as set -x). u marks the function as undefined, which causes autoloading of the function (i.e., a search of FPATH locates the function when it's first used. ksh93 also searches PATH). In ksh88, x exports the function. In ksh93, x is accepted but does nothing. Note the aliases autoload and functions.

-F d

variable is a floating-point number. d is the number of decimal places. The value is printed using printf%f format. ksh93 only.

-H

On non-Unix systems, map Unix filenames to host filenames.

-i [ n ]

Define variables as integers of base n. integer is an alias for typeset -i.

-L [ n ]

Define variables as left-justified strings, n characters long (truncate or pad with blanks on the right as needed). Leading blanks are stripped; leading zeroes are stripped if -Z is also specified. If no n is supplied, field width is that of the variable's first assigned value.

-l

Convert uppercase to lowercase.

-n

variable is an indirect reference to another variable (a nameref ). ksh93 only. (See the section "Variables," earlier in this chapter.)

-p

Print typeset commands to re-create the types of all the current variables. ksh93 only.

-R [ n ]

Define variables as right-justified strings, n characters long (truncate or pad with blanks on the left as needed). Trailing blanks are stripped. If no n is supplied, field width is that of the variable's first assigned value.

-r

Mark variables as read-only. See also readonly.

-t

Mark variables with a user-definable tag.

-u

Convert lowercase to uppercase.

-ui [ n ]

Define variables as unsigned integers of base n. ksh93 only.

-x

Mark variables for automatic export.

-Z [ n ]

When used with -L, strip leading zeroes. When used alone, it's similar to -R except that -Z pads numeric values with zeroes and pads text values with blanks.

Examples

typeset               List name, value, and type of all set variables
    typeset -x            List names and values of exported variables
    typeset +r PWD        End read-only status of PWD
    typeset -i n1 n2 n3   Three variables are integers
    typeset -R5 zipcodezipcode is flush right, five characters wide

Name

ulimit

Synopsis

    ulimit [options] [n]

Print the value of one or more resource limits, or, if n is specified, set a resource limit to n. Resource limits can be either hard (-H) or soft (-S). By default, ulimit sets both limits or prints the soft limit. The options determine which resource is acted on.

Options

-H

Hard limit. Anyone can lower a hard limit; only privileged users can raise it.

-S

Soft limit. Must be less than or equal to the hard limit.

-a

Print all limits.

-b

Size of socket buffers. ksh93 only.

-c

Maximum size of core files.

-d

Maximum kilobytes of data segment or heap.

-f

Maximum size of files (the default option).

-l

Maximum size of address space that can be locked in memory. Not ksh88.

-L

Maximum number of file locks. ksh93 only.

-m

Maximum kilobytes of physical memory. (Not effective on all Unix systems.)

-M

Maximum size of the address space. ksh93 only.

-n

Maximum number of file descriptors.

-p

Size of pipe buffers. (Not effective on all Unix systems.)

-s

Maximum kilobytes of stack segment.

-t

Maximum CPU seconds.

-T

Maximum number of threads. ksh93 only.

-u

Maximum number of processes a single user can have.

-v

Maximum kilobytes of virtual memory.

Name

umask

Synopsis

    umask [nnn]
    umask [-pS] [mask]

Display file creation mask or set file creation mask to octal value nnn. The file creation mask determines which permission bits are turned off (e.g., umask 002 produces rw-rw-r--). See the entry in Chapter 2 for examples.

The second form is not in ksh88. A symbolic mask is permissions to keep.

Options

-p

Output is in a form that can be reread later by the shell. Bash only.

-S

Print the current mask using symbolic notation. Not ksh88.

Name

unalias

Synopsis

    unalias names
    unalias -a

Remove names from the alias list. See also alias.

Option

-a

Remove all aliases. Not ksh88.

Name

unset

Synopsis

    unset [options]names

Erase definitions of functions or variables listed in names.

Options

-f

Unset functions names.

-n

Unset indirect variable (nameref) name, not the variable the nameref refers to. ksh93 only.

-v

Unset variables names (default). Not ksh88.

Name

until

Synopsis

    until condition
    do
     commandsdone

Until condition is met, do commands. condition is often specified with the test command. See the Examples under case and test.

Name

wait

Synopsis

    wait [ID]

Pause in execution until all background jobs complete (exit status 0 is returned), or pause until the specified background process ID or job ID completes (exit status of ID is returned). Note that the shell variable $! contains the process ID of the most recent background process.

Example

wait $!  Wait for most recent background process to finish

Name

whence

Synopsis

    whence [options]commands

Korn shell only. Show whether each command name is a Unix command, a built-in command, a defined shell function, or an alias.

Options

-a

Print all interpretations of commands. ksh93 only.

-f

Skip the search for shell functions. ksh93 only.

-p

Search for the pathname of commands.

-v

Verbose output.

Name

while

Synopsis

    while conditiondo
     commands
    done

While condition is met, do commands. condition is often specified with the test commands. See the Examples under case and test.

Name

filename

Synopsis

              filename

Read and execute commands from executable file filename, or execute a binary object file.

Chapter 5. tcsh: An Extended C Shell

This chapter describes tcsh, an enhanced version of the C shell. On many systems, tcsh is also the regular C shell (/bin/csh); in that case, the tcsh features described in this chapter work even when you run csh. The C shell was so named because many of its programming constructs and symbols resemble those of the C programming language. The following topics are presented:

Overview of features

Invoking the shell

Syntax

Variables

Expressions

Command history

Command-line manipulation

Job control

Built-in commands

For more information on tcsh, see Using csh & tcsh, which is listed in the Bibliography. The web site for tcsh is http://www.tcsh.org.

Overview of Features

Features of tcsh include:

Input/output redirection

Wildcard characters (metacharacters) for filename abbreviation

Shell variables for customizing your environment

Integer arithmetic

Access to previous commands (command history)

Command-name abbreviation (aliasing)

A built-in command language for writing shell programs

Job control

Command-line editing and editor commands

Word completion (tab completion)

Spellchecking

Scheduled events, such as logout or terminal locking after a set idle period and delayed commands

Read-only variables

Invoking the Shell

The tcsh shell can be invoked as follows:

tcsh [ options ] [ arguments ]

tcsh executes commands from a terminal or a file. The options -n, -v, and -x are useful when debugging scripts.

Options

-b

Allow the remaining command-line options to be interpreted as options to a specified command rather than as options to tcsh itself.

-c

Read and execute commands specified by the argument that follows and place any remaining arguments in the argv shell variable.

-d

Load directory stack from ~/.cshdirs even if not a login shell.

-e

Exit if a command produces errors.

-f

Fast startup; start without executing .tcshrc or .login.

-i

Invoke interactive shell (prompt for input) even if not on a terminal.

-l

Login shell (must be the only option specified).

-m

Load ~/.tcshrc even if effective user is not the owner of the file.

-n

Parse commands, but do not execute.

-q

Accept SIGQUIT when used under a debugger. Disables job control.

-s

Read commands from the standard input.

-t

Exit after executing one line of input (which may be continued with a \ to escape the newline).

-v

Display commands before executing them; expand history substitutions, but not other substitutions (e.g., filename, variable, and command). Same as setting verbose.

-V

Same as -v, but also display .tcshrc.

-x

Display commands before executing them, but expand all substitutions. Same as setting the echo shell variable. -x is often combined with -v.

-X

Same as -x, but also display .tcshrc.

Arguments

Arguments are assigned, in order, to the positional parameters $1, $2, and so on. If the first argument is an executable file, commands are read from it, and the remaining arguments are assigned to $1, $2, and so forth. The positional parameters are also available in the argv shell variable.

Syntax

This section describes the syntax used by tcsh . The topics are arranged as follows:

Special files

Filename metacharacters

Quoting

Command forms

Redirection forms

Special Files

Filename

Description

/etc/csh.cshrc

Read by any shell before reading per-user initialization files.

~/.tcshrc or ~/.cshrc

Executed at each instance of shell startup. If no ~/.tcshrc is found, tcsh tries ~/.cshrc.

/etc/csh.login

Read by login shell before reading per-user initialization files.

~/.login

Executed by login shell after .tcshrc.

~/.cshdirs

Used to reload the directory stack after executing ~/.login. (See the savedirs variable.)

~/.history

History list saved from previous login.

/etc/csh.logout

Executed by login shell at logout, before ~/.logout.

~/.logout

Executed by login shell at logout.

/etc/passwd

Source of home directories for ~ name abbreviations. (May come from NIS or NIS+ instead.)

Example startup files are available from http://tcshrc.sourceforge.net.

Filename Metacharacters

Metacharacters

Meaning

*

Match any string of zero or more characters.

?

Match any single character.

[ abc ...]

Match any one of the enclosed characters; a hyphen can be used to specify a range (e.g., a-z, A-Z, 0–9).

[^abc...]

Match any character not enclosed as above.

{abc,xxx,...}

Expand each comma-separated string inside braces. The strings need not match actual filenames.

~

Home directory for the current user.

~ name

Home directory of user name.

= n

The nth entry in the directory stack, counting from zero.

=-

The last entry in the directory stack.

^ pattern

Matches anything that pattern does not match. To work correctly, pattern must contain ?, *, or [...], and should not contain {...} or ~.

Examples

    % ls new*
                     Match new and new.1
    % cat ch?
                     Match ch9 but not ch10
    % vi[D-R]*
                     Match files that begin with uppercase D through R
    % ls {ch,app}?
                     Expand, then match ch1, ch2, app1, app2
    % mv info{,.old}
                     Expands to mv info info.old
    % cd ~tom
                     Change to tom's home directory

    % touch aa bb cc
                     Create some files
    % ls ^a*
                     List nonmatching filenames
    bb  cc

Tip

On modern systems, ranges such as [D-R] are not portable; the system's locale may include more than just the uppercase letters from D to R in the range.

Quoting

Quoting disables a character's special meaning and allows it to be used literally, as itself. The characters in the following table have special meaning to tcsh .

Characters

Description

;

Command separator

&

Background execution

()

Command grouping

|

Pipe

* ? [ ] ~ ^

Filename metacharacters

{ }

String expansion characters (usually don't require quoting )

< > & !

Redirection symbols

! ^

History substitution, quick substitution

" ' \

Used in quoting other characters

'

Command substitution

$

Variable substitution

space tab newline

Word separators

The characters that follow can be used for quoting:

" "

Everything between " and " is taken literally except for the following characters, which keep their special meaning:

$

Variable substitution will occur.

'

Command substitution will occur.

"

The end of the double quote.

\

Escape next character.

!

The history character.

newline

The newline character.

' '

Everything between ' and ' is taken literally except for ! (history), another ', and newline.

\

The character following a \ is taken literally. Use within " " to escape ", $, ', and newline. Use within ' ' to escape newlines. Often used to escape itself, spaces, or newlines. Always needed to escape a history character (usually !).

Examples

    % echo 'Single quotes "protect" double quotes'
    Single quotes "protect" double quotes

    % echo "Don't double quotes protect single quotes too?"
    Don't double quotes protect single quotes too?

    % echo "You have 'ls|wc -l' files in 'pwd'"
    You have       43 files in /home/bob

    % echo The value of \$x is $x
    The value of $x is 100

Command Forms

Command

Action

cmd &

Execute cmd in the background.

cmd1 ; cmd2

Command sequence; execute multiple cmds on the same line.

( cmd1 ; cmd2 )

Subshell; treat cmd1 and cmd2 as a command group.

cmd1 | cmd2

Pipe; use output from cmd1 as input to cmd2.

cmd1 ' cmd2 '

Command substitution; run cmd2 first and use its output as arguments to cmd1.

cmd1 && cmd2

AND; execute cmd1 and then (if cmd1 succeeds) cmd2. This is a "short-circuit" operation; cmd2 is never executed if cmd1 fails.

cmd1 || cmd2

OR; execute either cmd1 or (if cmd1 fails) cmd2. This is a "short-circuit" operation; cmd2 is never executed if cmd1 succeeds.

Examples

    % nroff file > file.out &
                     Format in the background
    % cd; ls
                     Execute sequentially
    % (date; who; pwd) > logfile
                     All output is redirected
    % sort file | pr -3 | lp
                     Sort file, page output, then print
    % vi 'grep -l ifdef *.c'
                     Edit files found by grep
    % egrep '(yes|no)' 'cat list'
                     Specify a list of files to search
    % grep XX file && lp file
                     Print file if it contains the pattern,
    % grep XX file || echo XX not foundotherwise, echo an error message

Redirection Forms

File descriptor

Name

Common abbreviation

Typical default

0

Standard input

stdin

Keyboard

1

Standard output

stdout

Screen

2

Standard error

stderr

Screen

The usual input source or output destination can be changed with the redirection commands listed in the following sections.

Simple redirection

Command

Action

cmd > file

Send output of cmd to file (overwrite).

cmd >! file

Same as preceding, even if noclobber is set.

cmd >> file

Send output of cmd to file (append).

cmd >>! file

Same as preceding, even if noclobber is set.

cmd < file

Take input for cmd from file.

cmd << text

Read standard input up to a line identical to text (text can be stored in a shell variable). Input usually is typed at the keyboard or in the shell program. Commands that typically use this syntax include cat, echo, ex, and sed. If text is quoted (using any of the shell's quoting mechanisms), the input is passed through verbatim. Otherwise, the shell performs variable and command substitutions on the input. When quoting text, the ending delimiter must be quoted identically.

Multiple redirection

Command

Action

cmd >& file

Send both standard output and standard error to file.

cmd >&! file

Same as preceding, even if noclobber is set.

cmd >>& file

Append standard output and standard error to end of file.

cmd >>&! file

Same as preceding, even if noclobber is set.

cmd1 |& cmd2

Pipe standard error together with standard output.

( cmd > f1 ) >& f2

Send standard output to file f1 and standard error to file f2.

cmd | tee files

Send output of cmd to standard output (usually the screen) and to files. (See the Example in Chapter 2 under tee.)

Examples

    % cat part1 > book
                     Copy part1 to book
    % cat part2 part3 >> book
                     Append parts 2 and 3 to same file as part1
    % mail tim < report
                     Take input to message from report
    % cc calc.c >& error_out
                     Store all messages, including errors
    % cc newcalc.c >&! error_out
                     Overwrite old file
    % grep Unix ch* |& pr
                     Pipe all messages, including errors
    % (find / -print > filelist) >& no_access
                     Separate error messages from list of files
    % sed 's/^/XX /' << "END_ARCHIVE"
                     Supply text right after command
    ? This is often how a shell archive is "wrapped",
    ? bundling text for distribution. You would normally
    ? run sed from a shell program, not from the command line.
    ? "END_ARCHIVE"
    XX This is often how a shell archive is "wrapped",
    XX bundling text for distribution.  You would normally
    XX run sed from a shell program, not from the command line.

Variables

This subsection describes the following:

Variable substitution

Variable modifiers

Predefined shell variables

Formatting in the prompt variable

Sample .tcshrc file

Environment variables

Variable Substitution

In the following substitutions, braces ({ }) are optional, except when needed to separate a variable name from following characters that would otherwise be considered part of the name.

Variable

Description

${ var }

The value of variable var.

${ var [ i ]}

Select word or words in position i of var. i can be a single number, a range m-n, a range -n (missing m implies 1), a range m- (missing n implies all remaining words), or * (select all words). i also can be a variable that expands to one of these values.

${# var }

The number of words in var.

${#argv}

The number of arguments.

$#

Same as ${#argv}.

${% var }

The number of characters in var.

${% n }

The number of characters in $argv[ n ].

$0

Name of the program.

${argv[ n ]}

Individual arguments on command line (positional parameters); 1 ≤ n ≤ 9.

${ n }

Same as ${argv[ n ]}.

${argv[*]}

All arguments on command line.

$*

Same as {$argv[*]}.

$argv[$#argv]

The last argument.

${? var }

Return 1 if var is set; 0 if var is not set.

$?0

Return 1 if input filename is known, 0 if not.

$$

Process number of current shell; useful as part of a filename for creating temporary files with unique names.

$?

Same as $status.

$!

Process ID number of last background process started by the shell.

$_

Text of the command line of the last command executed.

$<

Read a line from standard input.

Examples

Sort the third through last arguments and save the output in a file whose name is unique to this process:

    sort $argv[3-] > tmp.$$

In a .tcshrc file, process commands only if the shell is interactive (i.e., if the prompt variable is set):

    if ($?prompt) then
        set commands,
                     alias commands,
                     etc.
    endif

Variable Modifiers

Except for $? var, $?0, $# var, $% var, $#, $$, $?, $!, $_, and $<, the variable substitutions in the preceding section may be followed by one of these modifiers (when braces are used, the modifier goes inside them):

:r

Return the variable's root (the portion before the last dot).

:e

Return the variable's extension.

:h

Return the variable's header (the directory portion).

:t

Return the variable's tail (the portion after the last slash).

:gr

Return all roots.

:ge

Return all extensions.

:gh

Return all headers.

:gt

Return all tails.

:q

Quote a wordlist variable, keeping the items separate. Prevents further substitution. Useful when the variable contains filename metacharacters that should not be expanded.

:x

Quote a pattern, expanding it into a wordlist.

Examples using pathname modifiers

The following table shows the effect of pathname modifiers if the aa variable is set as follows:

    set aa=(/progs/num.c /book/chap.ps)

Variable portion

Specification

Output result

Normal variable

echo $aa

/progs/num.c /book/chap.ps

Second root

echo $aa[2]:r

/book/chap

Second header

echo $aa[2]:h

/book

Second tail

echo $aa[2]:t

chap.ps

Second extension

echo $aa[2]:e

ps

Root

echo $aa:r

/progs/num /book/chap.ps

Global root

echo $aa:gr

/progs/num /book/chap

Header

echo $aa:h

/progs /book/chap.ps

Global header

echo $aa:gh

/progs /book

Tail

echo $aa:t

num.c /book/chap.ps

Global tail

echo $aa:gt

num.c chap.ps

Extension

echo $aa:e

c /book/chap.ps

Global extension

echo $aa:ge

c ps

Examples using quoting modifiers

Unless quoted, the shell expands variables to represent files in the current directory:

    % set a="[a-z]*" A="[A-Z]*"
    % echo "$a" "$A"
    [a-z]* [A-Z]*

    % echo $a $A
    at cc m4 Book Doc

    % echo $a:x $A
    [a-z]* Book Doc

    % set d=($a:q $A:q)
    % echo $d
    at cc m4 Book Doc

    % echo $d:q
    [a-z]* [A-Z]*

    % echo $d[1]+++ $d[2]
    at cc m4 +++ Book Doc

    % echo $d[1]:q
    [a-z]*

Predefined Shell Variables

Variables can be set in one of two ways; by assigning a value:

    set var=value

or by simply turning the variable on:

    set var

The latter case is useful for simple "Is the variable set?" kinds of tests.

In the following list, variables that accept values are shown with the equals sign followed by the type of value they accept; the value is then described. (Note, however, that variables such as argv, cwd, and status are never explicitly assigned.) For variables that are turned on or off, the list describes what they do when set. tcsh automatically sets (and, in some cases, updates) the variables addsuffix, argv, autologout, command, csubstnonl, cwd, dirstack, echo-style, edit, gid, home, loginsh, logout, owd, path, prompt, prompt2, prompt3, shell, shlvl, status, tcsh, term, tty, uid, user, and version.

addsuffix

Append / to directories and a space to files during tab completion to indicate a precise match.

afsuser

Set value to be used instead of the local username for Kerberos authentication with the autologout locking feature.

ampm

Display all times in 12-hour format.

argv=( args )

List of arguments passed to current command; default is ().

autocorrect

Check spelling before attempting to complete commands.

autoexpand

Expand history (such as ! references) during command completion.

autolist[=ambiguous]

Print possible completions when correct one is ambiguous. If ambiguous is specified, print possible completions only when completion adds no new characters.

autologout=( logout-minutes [ locking-minutes ])

Log out after logout-minutes of idle time. Lock the terminal after locking-minutes of idle time, requiring a password before continuing. Not used if the DISPLAY environment variable is set.

backslash_quote

Always allow backslashes to quote \, ', and ".

catalog

Use tcsh.${catalog} as the filename of the message catalog. The default is tcsh.

cdpath=( dirs )

List of alternate directories to search when locating arguments for cd, popd, or pushd.

color

Turn on color for ls-F, ls, or both. Setting to nothing is equivalent to setting for both.

colorcat

Enable color escape sequence for Native Language System (NLS) support and display NLS messages in color.

command

If set, holds the command passed to the shell with the -c option.

complete=enhance

If set to enhance, ignore case in completion, treat ., -, and _ as word separators, and consider _ and - to be the same.

continue=( cmdlist )

cmdlist is a list of command names. If a stopped job consists of one of the named commands, restart that job when the user enters the corresponding command name, instead of starting a new job.

continue_args=( cmdlist )

Like continue, but execute the following:

    echo 'pwd' $argv > ~/.cmd_pause; %cmd

correct={cmd|complete|all}

When cmd, spellcheck commands. When complete, complete commands. When all, spellcheck whole command line.

csubstnonl

Newlines and carriage returns in command substitution output are replaced by spaces. Set by default.

cwd= dir

Full pathname of current directory.

dextract

When set, the pushd command extracts the desired directory and puts it at the top of the stack instead of rotating the stack.

dirsfile= file

History file consulted by dirs -S and dirs -L. Default is ~/.cshdirs.

dirstack

Directory stack, in array format. dirstack[1] is always equivalent to cwd. The other elements can be artificially changed.

dspmbyte= code

Enable use of multibyte code; for use with Kanji. See the tcsh manpage for details.

dunique

Make sure that each directory exists only once in the stack.

echo

Redisplay each command line before execution; same as tcsh -x.

echo_style={bsd|sysv|both|none}

Don't echo a newline with the -n option (bsd), parse escaped characters (sysv), do both, or do neither.

edit

Enable command-line editor. Set by default for interactive shells.

ellipsis

For use with prompt variable. Use ... to represent skipped directories.

fignore=( suffs )

List of filename suffixes to ignore during filename completion.

filec

This variable exists for compatibility with the 4.3 BSD csh. By default, it is ignored in tcsh. However, if edit has been unset, then if filec is set a filename that is partially typed on the command line can be expanded to its full name when the Escape key is pressed. If more than one filename matches, type CTRL-D (EOF) to list possible completions.

gid

User's group ID.

group

User's group name.

histchars= ab

A two-character string that sets the characters to use in history-substitution and quick-substitution (default is !^).

histdup={all|prev|erase}

Maintain a record only of unique history events (all), do not enter a new event when it is the same as the previous one (prev), or remove an old event that is the same as the new one (erase).

histfile= file

History file consulted by history -S and history -L. Default is ~/.history.

histlit

Do not expand history lines when recalling them.

history=( n format )

The first word indicates the number of commands to save in the history list. The second indicates the format with which to display that list. See the section "Formatting for the Prompt Variable" later in this chapter for possible formats.

home= dir

Home directory of user, initialized from the environment variable HOME. The ~ character is shorthand for this value.

ignoreeof

Ignore an end-of-file (EOF) from terminals; prevents accidental logout.

implicitcd[=verbose]

If a directory name is entered as a command, cd to that directory. Can be set to verbose to echo the cd to standard output.

inputmode={insert|overwrite}

Control editor's mode.

killdup={all|prev|erase}

Enter only unique strings in the kill ring (all), do not enter a new string when it is the same as the current killed string (prev), or erase from the kill ring an old string that is the same as the current string (erase).

killring= num

Set the number of killed strings to keep in memory to num. The default is 30. If unset or set to a number less than two, keep only the most recently killed string.

listflags=( flags [ path ])

One or more of the a, A, or x options for the ls-F built-in command. The second word can be set to the path for the ls command.

listjobs[=long]

When a job is suspended, list all jobs (in long format, if specified).

listlinks

In the ls-F command, include the type of file to which links point (directory, nonexistent file, nondirectory).

listmax= num

Do not allow the list-choices editor command to print more than num choices before prompting.

listmaxrows= num

Do not allow the list-choices editor command to print more than num rows of choices before prompting.

loginsh

Set if shell is a login shell.

logout

Indicates status of an imminent logout (normal, automatic, or hangup). Useful in a ~/.logout file.

mail=( n files )

One or more files checked for new mail every five minutes or (if n is supplied) every n seconds.

matchbeep={never|nomatch|ambiguous|notunique}

Specifies circumstances under which completion should beep: never, if no match exists, if multiple matches exist, or if multiple matches exist and one is exact. If unset, ambiguous is used.

nobeep

Disable beeping, such as for ambiguous file completion.

noclobber

Don't redirect output to an existing file; prevents accidental destruction of files.

noding

Don't print DING! in prompt time specifiers when the hour changes.

noglob

Turn off filename expansion; useful in shell scripts.

nokanji

Disable Kanji (if supported).

nonomatch

Treat filename metacharacters as literal characters if no match exists (e.g., vi ch* creates new file ch* instead of printing "No match").

nostat=( directory-list )

Do not stat directory-list during completion.

notify

Notify user of completed jobs right away, instead of waiting for the next prompt.

owd

Old working directory.

path=( dirs )

List of pathnames in which to search for commands to execute. Initialized from PATH; the default is . /usr/ucb /bin /usr/bin. However, standard start-up scripts may change it.

printexitvalue

Print all nonzero exit values.

prompt=' str '

String that prompts for interactive input; default is %# in interactive shells. See the section "Formatting for the Prompt Variable" later in this chapter for formatting information.

prompt2=' str '

String that prompts for interactive input in foreach and while loops and continued lines (those with escaped newlines). See the section "Formatting for the Prompt Variable" for formatting information.

prompt3=' str '

String that prompts for interactive input in automatic spelling correction. See the section "Formatting for the Prompt Variable" for formatting information.

promptchars= cc

Use the two characters specified as cc with the %# prompt sequence to indicate normal users and the superuser, respectively.

pushdsilent

Do not print directory stack when pushd and popd are invoked.

pushdtohome

Change to home directory when pushd is invoked without arguments.

recexact

Consider completion to be concluded on first exact match.

recognize_only_executables

When command completion is invoked, show only executable files.

rmstar

Prompt before executing the command rm *.

rprompt= string

The string to print on the right side of the screen while the prompt is displayed on the left. The string may have the same special contents as for the prompt variable.

savedirs

Execute dirs -S before exiting.

savehist=( max [merge])

Execute history -S before exiting. Save no more than max lines of history. If merge specified, merge those lines with previous history saves, and sort by time.

sched= string

Format for sched's printing of events. See the section "Formatting for the Prompt Variable" for formatting information.

shell= file

Pathname of the shell program.

shlvl

Number of nested shells.

status= n

Exit status of last command. Built-in commands return 0 (success) or 1 (failure).

symlinks={chase|ignore|expand}

Specify manner in which to deal with symbolic links. Expand them to real directory name in cwd (chase), treat them as real directories (ignore), or expand arguments that resemble pathnames (expand).

tcsh

Version of tcsh.

term

Terminal type.

time=' n % c '

If command execution takes more than n CPU seconds, report user time, system time, elapsed time, and CPU percentage. Supply optional % c flags to show other data. See the tcsh manpage for the details.

tperiod

Number of minutes between executions of the periodic alias (described later in this chapter).

tty

Name of tty, if applicable.

uid

User ID.

user

Login name of user, initialized from USER.

verbose

Display a command after history substitution; same as tcsh -v.

version

Shell's version and additional information, including options set at compile time.

visiblebell

Flash screen instead of beeping.

watch=([ n ] user terminal... )

Watch for user logging in at terminal, where terminal can be a device name or any. Check every n minutes, or 10 by default.

who= string

Specify information to be printed by watch. See the tcsh manpage for the details.

wordchars= chars

List of all nonalphanumeric characters that may be part of a word. Default is *?_-.[ ]~=.

Formatting for the Prompt Variable

tcsh provides a list of substitutions that can be used in formatting the prompt. The list of available substitutions includes:

%%

Literal %.

%/

The present working directory.

%~

The present working directory, in ~ notation.

%#

# for the superuser, > for others.

%?

Previous command's exit status.

%$ var

The value of the shell or environment variable var.

%{ string %}

Include string as a literal escape sequence to change terminal attributes (but should not move the cursor location); cannot be the last sequence in the prompt.

\c, ^c

Parse c as in the bindkey built-in command.

%b

End boldfacing.

%B

Begin boldfacing.

%c[[0]n], %.[[0]n]

The last n (default 1) components of the present working directory; if a leading 0 is specified, replace removed components with /<skipped>.

%C

Similar to %c, but use full pathnames instead of ~ notation.

%d

Day of the week (e.g., Mon, Tue).

%D

Day of month (e.g., 09, 10).

%h, %!, !

Number of current history event.

%j

The number of jobs.

%l

Current tty.

%L

Clear from the end of the prompt to the end of the display or the line.

%m

First component of hostname.

%M

Fully qualified hostname.

%n

Username.

%p

Current time, with seconds (12-hour mode).

%P

Current time, with seconds (24-hour format).

%R

In prompt2, the parser status; in prompt3, the corrected string; and in history, the history string.

%s

End standout mode (reverse video).

%S

Begin standout mode (reverse video).

%t, %@

Current time (12-hour format).

%T

Current time (24-hour format).

%u

End underlining.

%U

Begin underlining.

%w

Month name (e.g., Jan, Feb).

%W

Month number (e.g., 09, 10).

%y

Year, two digits (e.g., 06, 07).

%Y

Year, four digits (e.g., 2006, 2007).

Sample .tcshrc File

    # PREDEFINED VARIABLES

    set path=(~ ~/bin /usr/ucb /bin /usr/bin)
    set mail=(/var/mail/tom)

    if ($?prompt) then                   # settings for interactive use
      set echo
      set noclobber ignoreeof

      set cdpath=(/usr/lib /var/spool/uucp)
    # Now I can type cd macros
    # instead of cd /usr/lib/macros

      set history=100
      set prompt='tom \!% '              # includes history number
      set time=3

    # MY VARIABLES

      set man1="/usr/share/man/man1"     # lets me do   cd $man1, ls $man1
      set a="[a-z]*"                     # lets me do   vi $a
      set A="[A-Z]*"                     # or           grep string $A

    # ALIASES

      alias c "clear; dirs"              # use quotes to protect ; or |
      alias h "history|more"
      alias j jobs -l
      alias ls ls -sFC                   # redefine ls command
      alias del 'mv \!* ~/tmp_dir'       # a safe alternative to rm
    endif

Environment Variables

tcsh maintains a set of environment variables , which are distinct from shell variables and aren't really part of the shell. Shell variables are meaningful only within the currently running shell, but environment variables are exported automatically, making them available to other programs run by the shell. For example , shell variables are accessible only to the particular script in which they're defined, whereas environment variables can be used by any shell scripts, mail utilities, or editors you might invoke.

Environment variables are assigned as follows:

    setenv VAR value

By convention, environment variable names are all uppercase. You can create your own environment variables, or you can use the predefined environment variables that follow.

The following environment variables have corresponding tcsh shell variables. When either one changes, the value is copied to the other.

AFSUSER

Alternative to local user for Kerberos authentication with autologout locking; same as afsuser.

GROUP

User's group name; same as group.

HOME

Home directory; same as home.

PATH

Search path for commands; same as path.

SHLVL

Number of nested shell levels; same as shlvl.

TERM

Terminal type; same as term.

USER

User's login name; same as user.

Other environment variables, which do not have corresponding shell variables, include the following:

COLUMNS

Number of columns on terminal.

DISPLAY

Identifies user's display for the X Window System. If set, the shell doesn't set autologout.

EDITOR

Pathname to default editor. See also VISUAL.

EXINIT

A string of ex commands similar to those found in the startup .exrc file (e.g., set ai). Used by vi and ex. See also Chapter 9.

HOST

Name of machine.

HOSTTYPE

Type of machine. Obsolete; will be removed eventually.

HPATH

Colon-separated list of directories to search for documentation for the run-help editor command.

LANG

Preferred language. Used for native language support.

LC_CTYPE

The locale, as it affects character handling. Used for native language support.

LINES

Number of lines on the screen.

LOGNAME

Another name for the USER variable.

LS_COLORS

Colors for use with the ls command. See the tcsh manpage for detailed information.

MACHTYPE

Type of machine.

MAIL

The file that holds mail. Used by mail programs. This is not the same as the shell variable mail, which only checks for new mail.

NOREBIND

Printable characters not rebound. Used for native language support.

OSTYPE

Operating system.

PWD

The current directory; the value is copied from cwd, but only after a directory change.

REMOTEHOST

Machine name of remote host from which the user logged in.

SHELL

Undefined by default; once initialized to shell, the two are identical.

TERMCAP

The file that holds the cursor-positioning codes for your terminal type. Default is /etc/termcap.

VENDOR

System vendor.

VISUAL

Pathname to default full-screen editor. See also EDITOR.

Expressions

Expressions are used in @ (the C shell math operator), if, and while statements to perform arithmetic , string comparisons, file testing, and so on. exit and set also specify expressions , as can the tcsh built-in command filetest. Expressions are formed by combining variables and constants with operators that resemble those in the C programming language. Operator precedence is the same as in C. It is easiest to just remember the following precedence rules:

* / %

+ -

Group all other expressions inside ()s; parentheses are required if the expression contains <, >, &, or |

Operators

Operators can be one of the following types.

Assignment operators

Operator

Description

=

Assign value.

+= -=

Reassign after addition/subtraction.

*= /= %=

Reassign after multiplication/division/remainder.

&= ^= |=

Reassign after bitwise AND/XOR/OR.

++

Increment.

--

Decrement.

Arithmetic operators

Operator

Description

* / %

Multiplication; integer division; modulus (remainder).

+ -

Addition; subtraction.

Bitwise and logical operators

Operator

Description

~

Binary inversion (one's complement).

!

Logical negation.

<< >>

Bitwise left shift; bitwise right shift.

&

Bitwise AND.

^

Bitwise exclusive OR.

|

Bitwise OR.

&&

Logical AND (short-circuit).

||

Logical OR (short-circuit).

{ command }

Return 1 if command is successful, 0 otherwise. Note that this is the opposite of command 's normal return code. The $status variable may be more practical.

Comparison operators

Operator

Description

== !=

Equality; inequality.

<= >=

Less than or equal to; greater than or equal to.

< >

Less than; greater than.

=~

String on left matches a filename pattern on right containing *, ?, or [...].

!~

String on left does not match a filename pattern on right containing *, ?, or [...].

File inquiry operators

Command substitution and filename expansion are performed on file before the test is performed. Operators can be combined (e.g., -ef). The following is a list of the valid file inquiry operators.

Operator

Description

-b file

The file is a block special file.

-c file

The file is a character special file.

-d file

The file is a directory.

-e file

The file exists.

-f file

The file is a plain file.

-g file

The file's set-group-ID bit is set.

-k file

The file's sticky bit is set.

-l file

The file is a symbolic link.

-L file

Apply any remaining operators to symbolic link, not the file it points to.

-o file

The current user owns the file.

-p file

The file is a named pipe (FIFO).

-r file

The current user has read permission.

-s file

The file has nonzero size.

-S file

The file is a socket special file.

-t file

file is a digit and is an open file descriptor for a terminal device.

-u file

The file's set-user-ID bit is set.

-w file

The current user has write permission.

-x file

The current user has execute permission.

-X file

The file is executable and is in the path, or is a shell built-in.

-z file

The file has zero size.

!

Reverse the sense of any following inquiry, which may be any of the tests in this table.

Finally, tcsh provides the following operators, which return other kinds of information.

Operator

Description

-A [:] file

Last time file was accessed, as the number of seconds since the epoch. With a colon (:), the result is in timestamp format.

-C [:] file

Last time inode was modified. With a colon (:), the result is in timestamp format.

-D file

Device number.

-F file

Composite file identifier, in the form device:inode.

-G [:] file

Numeric group ID for the file. With a colon (:), the result is the group name if known, otherwise the numeric group ID.

-I file

Inode number.

-L file

The name of the file pointed to by symbolic link file.

-M [:] file

Last time file was modified. With a colon (:), the result is in timestamp format.

-N file

Number of hard links.

-P [:] file

Permissions in octal, without leading 0. With a colon (:), the result includes a leading 0.

-P mode [:] file

Equivalent to -P file ANDed with mode. With a colon (:), the result includes a leading 0.

-U [:] file

Numeric user ID of the file's owner. With a colon (:), the result is the username if known, otherwise the numeric user ID.

-Z file

The file's size, in bytes.

These operators may only be used in multioperator tests, and they must be the last operator in such tests.

Examples

The following examples show @ commands and assume n = 4.

Expression

Value of $x

@ × = ($n > 10 || $n < 5)

1

@ × = ($n >= 0 && $n < 3)

0

@ × = ($n << 2)

16

@ × = ($n >> 2)

1

@ × = $n % 2

0

@ × = $n % 3

1

The following examples show the first line of if or while statements.

Expression

Meaning

while ($#argv != 0)

While there are arguments ...

if ($today[1] == "Fri")

If the first word is "Fri" ...

if ($file !~ *.[zZ])

If the file doesn't end with .z or .Z ...

if ($argv[1] =~ chap?)

If the first argument is chap followed by a single character ...

if (-f $argv[1])

If the first argument is a plain file ...

if (! -d $tmpdir)

If tmpdir is not a directory ...

Command History

Previously executed commands are stored in a history list. You can access this list to verify commands, repeat them, or execute modified versions of them. The history built-in command displays the history list; the predefined variables histchars, history, and savehist also affect the history mechanism. There are a number of ways to use the history list:

Rerun a previous command

Edit a previous command

Make command substitutions

Make argument substitutions (replace specific words in a command)

Extract or replace parts of a command or word

The easiest way to take advantage of the command history is to use the arrow keys to move around in the history, select the command you want, and then rerun it or use the editing features described in the section "Command-Line Editing," later in this chapter, to modify the command. The arrow keys are:

Key

Description

Up arrow (↑)

Previous command.

Down arrow (↓)

Next command.

Left arrow (←)

Move left in command line.

Right arrow (→)

Move right in command line.

The next sections describe some tools for editing and rerunning commands. With the C shell, which does not have the command-line editing features of tcsh , these features are important for rerunning commands. With tcsh, they are less often used, but they still work.

Command Substitution

Command

Description

!

Begin a history substitution.

!!

Previous command.

! N

Command number N in history list.

!- N

N th command back from current command.

! string

Most recent command that starts with string.

!? string ?

Most recent command that contains string.

!? string ?%

Most recent command argument that contains string.

!$

Last argument of previous command.

!! string

Previous command, then append string.

! N string

Command N, then append string.

!{ s1 } s2

Most recent command starting with string s1, then append string s2.

^ old ^ new ^

Quick substitution; change string old to new in previous command, and execute modified command.

Command Substitution Examples

The following command is assumed:

        3% vi cprogs/01.c ch002 ch03

Event number

Command typed

Command executed

4

^00^0

vi cprogs/01.c ch02 ch03

5

nroff !*

nroff cprogs/01.c ch02 ch03

6

nroff !$

nroff ch03

7

!vi

vi cprogs/01.c ch02 ch03

8

!6

nroff ch03

9

!?01

vi cprogs/01.c ch02 ch03

10

!{nr}.new

nroff ch03.new

11

!!|lp

nroff ch03.new | lp

12

more !?pr?%

more cprogs/01.c

Word Substitution

Word specifiers allow you to retrieve individual words from previous command lines. Colons may precede any word specifier. After an event number, colons are optional unless shown here.

Specifier

Description

:0

Command name.

: n

Argument number n.

^

First argument.

$

Last argument.

%

Argument matched by a !? string ? search.

:n - m

Arguments n through m.

- m

Words 0 through m; same as :0- m.

: n -

Arguments n through next-to-last.

: n *

Arguments n through last; same as n -$.

*

All arguments; same as ^-$ or 1-$.

#

Current command line up to this point; fairly useless.

Word Substitution Examples

The following command is assumed:

    13% cat ch01 ch02 ch03 biblio back

Event number

Command typed

Command executed

14

ls !13^

ls ch01

15

sort !13:*

sort ch01 ch02 ch03 biblio back

16

lp !cat:3*

lp ch03 biblio back

17

!cat:0–3

cat ch01 ch02 ch03

18

vi !-5:4

vi biblio

History Modifiers

Command and word substitutions can be modified by one or more of the following modifiers.

Printing, substitution, and quoting

Modifier

Description

:p

Display command, but don't execute.

:s/ old / new

Substitute string new for old, first instance only.

:gs/ old / new

Substitute string new for old, all instances.

:&

Repeat previous substitution (:s or ^ command), first instance only.

:g&

Repeat previous substitution, all instances.

:q

Quote a word list.

:x

Quote separate words.

Truncation

Modifier

Description

:r

Extract the first available pathname root (the portion before the last period).

:gr

Extract all pathname roots.

:e

Extract the first available pathname extension (the portion after the last period).

:ge

Extract all pathname extensions.

:h

Extract the first available pathname header (the portion before the last slash).

:gh

Extract all pathname headers.

:t

Extract the first available pathname tail (the portion after the last slash).

:gt

Extract all pathname tails.

:u

Make first lowercase letter uppercase.

:l

Make first uppercase letter lowercase.

:a

Apply modifier(s) following a as many times as possible to a word. If used with g, a is applied to all words.

History Modifier Examples

From the table in the section "Word Substitution Examples," command number 17 is:

    17% cat ch01 ch02 ch03

Event number

Command typed

Command executed

19

!17:s/ch/CH/

cat CH01 ch02 ch03

20

!17:g&

cat CH01 CH02 CH03

21

!more:p

more cprogs/01.c (displayed only)

22

cd !$:h

cd cprogs

23

vi !mo:$:t

vi 01.c

24

grep stdio !$

grep stdio 01.c

25

^stdio^include stdio^:q

grep "include stdio" 01.c(quotes not shown intcsh output)

26

nroff !21:t:p

nroff 01.c (is that what I wanted?)

27

!!

nroff 01.c (execute it)

Special Aliases

Certain special aliases can be set in tcsh. The aliases are initially undefined. Once set, the commands they specify are executed when specific events occur. The following is a list of the special aliases and when they are executed:

beepcmd

At beep.

cwdcmd

When the current working directory changes.

jobcmd

Before running a command or before its state changes. Like postcmd, but does not print built-ins.

helpcommand

Invoked by the run-help editor command. See the tcsh manpage for details.

periodic

Every few minutes. The exact amount of time is set by the tperiod shell variable.

precmd

Before printing a new prompt.

postcmd

Before running a command.

shell program

If a script does not specify a shell, interpret it with program, which should be a full pathname.

Examples

Demonstrate the cwdcmd alias:

    [arnold@mybox ~]$ alias cwdcmd 'echo now in $PWD'
                     Set alias
    [arnold@mybox ~]$ cd /tmp
                     Change directory
    now in /tmp                                              Output from alias
    [arnold@mybox /tmp]$ cd
                     Change back home
    now in /home/arnoldOutput from alias

Demonstrate the postcmd alias:

    [arnold@mybox ~]$ alias postcmd 'echo now starting\!'
                     Set alias
    [arnold@mybox ~]$ ls -FC *.txt
                     Run a command
    now starting!                                            Output from alias
    adr.gdb.backcover.txt  gdb.backcover.txt  sol-d1-2.txt   Output from command
    awkhomepage.txt        sol-d1-1.txt

Command-Line Manipulation

tcsh provides functionality for manipulating the command line, including word or command completion and the ability to edit a command line.

Completion

The shell automatically completes words and commands when you press the Tab key, and notifies you when a completion is finished by appending a space to complete filenames or commands and a / to complete directories.

In addition, tcsh recognizes ~ notation for home directories; it assumes that words at the beginning of a line and following |, &, ;, ||, or && are commands, and modifies the search path appropriately. Completion can be done midword; only the letters to the left of the cursor are checked for completion.

Related Shell Variables

autolist

fignore

filec

listmax

listmaxrows

Related Command-Line Editor Commands

complete-word-back

complete-word-forward

expand-glob

list-glob

See the tcsh manpage for a discussion of the built-in command-line editor and its commands.

Related Shell Built-ins

complete

uncomplete

Command-Line Editing

tcsh lets you move your cursor around in the command line, editing the line as you type. There are two main modes for editing the command line , based on the two most common text editors: Emacs and vi. Emacs mode is the default; you can switch between the modes with:

    % bindkey -e
                  Select Emacs bindings
    % bindkey -vSelect vi bindings

The main difference between the Emacs and vi bindings is that the Emacs bindings are modeless (i.e., they always work). With the vi bindings, you must switch between input and command modes; different commands are useful in each mode. Additionally:

Emacs mode is simpler; vi mode allows finer control.

Emacs mode allows you to yank cut text and set a mark; vi mode does not.

The command-history searching capabilities differ.

Emacs mode

The various editing keystrokes available in Emacs mode are described in Tables 5-1 through 5-3.

Table 5-1. Cursor positioning (Emacs mode)

Command

Description

CTRL-B

Move cursor back (left) one character.

CTRL-F

Move cursor forward (right) one character.

M-b

Move cursor back one word.

M-f

Move cursor forward one word.

CTRL-A

Move cursor to beginning of line.

CTRL-E

Move cursor to end of line.

Table 5-2. Text deletion (Emacs mode)

Command

Description

DEL or CTRL-H

Delete character to left of cursor.

CTRL-D

Delete character under cursor.

M-d

Delete word.

M-DEL or M-CTRL-H

Delete word backward.

CTRL-K

Delete from cursor to end-of-line.

CTRL-U

Delete entire line.

Table 5-3. Command history (Emacs mode)

Command

Description

CTRL-P

Previous command.

CTRL-N

Next command.

Up arrow

Previous command.

Down arrow

Next command.

cmd-fragment M-p

Search history for cmd-fragment, which must be the beginning of a command.

cmd-fragment M-n

Like M-p, but search forward.

M-num

Repeat next command num times.

CTRL-Y

Yank previously deleted string.

vi mode

vi mode has two submodes, input mode and command mode. The default mode is input. You can toggle modes by pressing Esc; alternatively, in command mode, typing a (append) or i (insert) will return you to input mode.

The editing keystrokes available in vi mode are described in Tables 5-4 through 5-10.

Table 5-4. Command history (vi input and command modes)

Command

Description

CTRL-P

Previous command.

CTRL-N

Next command.

Up arrow

Previous command.

Down arrow

Next command.

Esc

Toggle mode.

Table 5-5. Editing (vi input mode)

Command

Description

CTRL-B

Move cursor back (left) one character.

CTRL-F

Move cursor forward (right) one character.

CTRL-A

Move cursor to beginning of line.

CTRL-E

Move cursor to end-of-line.

DEL or CTRL-H

Delete character to left of cursor.

CTRL-W

Delete word backward.

CTRL-U

Delete from beginning of line to cursor.

CTRL-K

Delete from cursor to end-of-line.

Table 5-6. Cursor positioning (vi command mode)

Command

Description

h or CTRL-H

Move cursor back (left) one character.

l or SPACE

Move cursor forward (right) one character.

w

Move cursor forward one word.

b

Move cursor back one word.

e

Move cursor to next word ending.

W, B, E

Like w, b, and e, but treat only whitespace as word separator instead of any nonalphanumeric character.

^ or CTRL-A

Move cursor to beginning of line (first nonwhitespace character).

0

Move cursor to beginning of line.

$ or CTRL-E

Move cursor to end-of-line.

Table 5-7. Text insertion (vi command mode)

Command

Description

a

Append new text after cursor until Esc.

i

Insert new text before cursor until Esc.

A

Append new text after end of line until Esc.

I

Insert new text before beginning of line until Esc.

Table 5-8. Text deletion (vi command mode)

Command

Description

x

Delete character under cursor.

X or DEL

Delete character to left of cursor.

d m

Delete from cursor to end of motion command m.

D

Same as d$.

CTRL-W

Delete word backward.

CTRL-U

Delete from beginning of line to cursor.

CTRL-K

Delete from cursor to end of line.

Table 5-9. Text replacement (vi command mode)

Command

Description

c m

Change characters from cursor to end of motion command m until Esc.

C

Same as c$.

r c

Replace character under cursor with character c.

R

Replace multiple characters until Esc.

s

Substitute character under cursor with characters typed until Esc.

Table 5-10. Character-seeking motion (vi command mode)

Command

Description

f c

Move cursor to next instance of c in line.

F c

Move cursor to previous instance of c in line.

t c

Move cursor to just before next instance of c in line.

T c

Move cursor to just after previous instance of c in line.

;

Repeat previous f or F command.

,

Repeat previous f or F command in opposite direction.

Job Control

Job control lets you place foreground jobs in the background, bring background jobs to the foreground, or suspend (temporarily stop) running jobs. The shell provides the following commands for job control . For more information on these commands, see the following section, "Built-in Commands."

bg

Put a job in the background.

fg

Put a job in the foreground.

jobs

List active jobs.

kill

Terminate a job.

notify

Notify when a background job finishes.

stop

Suspend a background job.

CTRL-Z

Suspend the foreground job.

Many job-control commands take a jobID as an argument. This argument can be specified as follows:

% n

Job number n.

% s

Job whose command line starts with string s.

%? s

Job whose command line contains string s.

%%

Current job.

%

Current job (same as preceding).

%+

Current job (same as preceding).

%-

Previous job.

Built-in Commands

Name

@

Synopsis

        @ variable = expression
        @ variable[n] = expression
        @

Assign the value of the arithmetic expression to variable, or to the nth element of variable if the index n is specified. With no variable or expression specified, print the values of all shell variables (same as set). Expression operators as well as examples are listed under the section "Expressions," earlier in this chapter. Two special forms are also valid:

@ variable ++

@ variable [ n ]++

Increment variable or element by 1.

@ variable --

@ variable [ n ]--

Decrement variable or element by 1.

Name

#

Synopsis

    #

Ignore all text that follows on the same line. # is used in shell scripts as the comment character and is not really a command. In addition, a file that has # as its first character is sometimes interpreted by older systems as a C shell script.

Name

#!

Synopsis

    #! shell

Used as the first line of a script to invoke the named shell. Anything given on the rest of the line is passed as a single argument to the named shell. This feature is typically implemented by the kernel, but may not be supported on some older systems. Some systems have a limit of around 32 characters on the maximum length of shell. Any program that interprets input may be used for shell, such as awk or Perl. For example:

    #! /bin/tcsh
 -f

Name

:

Synopsis

    :

Null command. Returns an exit status of 0. The colon command is often put as the first character of a Bourne or Korn shell script to act as a place-holder to keep a # (hash) from accidentally becoming the first character.

Name

alias

Synopsis

    alias [name [command]]

Assign name as the shorthand name, or alias, for command. If command is omitted, print the alias for name; if name also is omitted, print all aliases. Aliases can be defined on the command line, but more often they are stored in .tcshrc so that they take effect upon logging in. (See the section "Sample .tcshrc File" earlier in this chapter.) Alias definitions can reference command-line arguments, much like the history list. Use \!* to refer to all command-line arguments, \!^ for the first argument, \!\!:2 for the second, \!$ for the last, and so on. An alias name can also be any valid Unix command except alias or unalias; however, you lose the original command's meaning unless you type \name. See also unalias and the earlier section "Special Aliases."

Examples

Set the size for xterm windows under the X Window System:

    alias R 'set noglob; eval 'resize'; unset noglob'

Show aliases that contain the string "ls":

    alias | grep ls

Run nroff on all command-line arguments:

    alias ms 'nroff -ms \!*'

Copy the file that is named as the first argument:

    alias back 'cp \!^ \!^.old'

Use the regular ls, not its alias:

    % \ls

Name

alloc

Synopsis

    alloc

Print total amount of used and free memory.

Name

bg

Synopsis

    bg [jobIDs]

Put the current job or the jobIDs in the background. See the earlier section "Job Control."

Example

To place a time-consuming process in the background, you might begin with:

    4% nroff -ms report | col > report.txtCTRL-Z

and then issue any one of the following:

    5% bg
    5% bg %
                     Current job
    5% bg %1
                     Job number 1
    5% bg %nr
                     Match initial string nroff
    5%% &

Name

bindkey

Synopsis

    bindkey [options] [key] [command]

Display all key bindings, or bind a key to an editor command.

Options

-a

List standard and alternate key bindings.

-b key

Expect key to be one of the following: a control character (in hat notation, e.g., ^B, or C notation, e.g., C-B); a metacharacter (e.g., M-B); a function key (e.g., F-string); or an extended prefix key (e.g., X-B).

-c command

Interpret command as a shell command, not as an editor command.

-d key

Bind key to its original binding.

-e

Bind to standard Emacs bindings.

-k key

Expect key to refer to an arrow (left, right, up, or down).

-l

List and describe all editor commands.

-r key

Completely unbind key.

-s

Interpret command as a literal string and treat as terminal input.

-u

Print usage message.

-v

Bind to standard vi bindings.

--

End option processing. The following item is treated as a key, even if it looks like an option.

Name

break

Synopsis

    break

Resume execution following the end command of the nearest enclosing while or foreach.

Name

breaksw

Synopsis

    breaksw

Break from a switch; continue execution after the endsw.

Name

built-ins

Synopsis

    built-ins

Print all built-in shell commands.

Name

bye

Synopsis

    bye

Same as logout. Must have been compiled into the shell; see the version variable.

Name

case

Synopsis

    case pattern:

Identify a pattern in a switch.

Name

cd

Synopsis

    cd [options] [dir]

Change working directory to dir; default is home directory of user. If dir is a relative pathname but is not in the current directory, the cdpath variable is searched. See the section "Sample .tcshrc File" earlier in this chapter.

Options

-

Change to previous directory. (Compare to popd, which manipulates the directory stack.)

-l

Explicitly expand ~ notation; implies -p.

-n

Wrap entries before end-of-line; implies -p.

-p

Print directory stack.

-v

Print entries one per line; implies -p.

Name

chdir

Synopsis

    chdir [dir]

Same as cd. Useful if you are redefining cd as an alias.

Name

complete

Synopsis

    complete [string [word/pattern/list[:select]/[suffix]]]

List all completions, or, if specified, all completions for string (which may be a pattern). Further options can be specified.

Options for word

c

Complete current word only, without referring to pattern.

C

Complete current word only, referring to pattern.

n

Complete previous word.

N

Complete word before previous word.

p

Expect pattern to be a range of numbers. Perform completion within that range.

Options for list

Various lists of strings can be searched for possible completions. Some list options include:

( string )

Members of the list string.

$ variable

Words from variable.

' command '

Output from command.

a

Aliases.

b

Bindings.

c

Commands.

C

External (not built-in) commands.

d

Directories.

D

Directories whose names begin with string.

e

Environment variables.

f

Filenames.

F

Filenames that begin with string.

g

Groups.

j

Jobs.

l

Limits.

n

Nothing.

s

Shell variables.

S

Signals.

t

Text files.

T

Text files whose names begin with string.

u

Users.

v

Any variables.

x

Like n, but prints select as an explanation with the editor command list-choices.

X

Completions.

select

select should be a glob pattern. Completions are limited to words that match this pattern. suffix is appended to all completions.

Name

continue

Synopsis

    continue

Resume execution of nearest enclosing while or foreach.

Name

default

Synopsis

    default:

Label the default case (typically last) in a switch.

Name

dirs

Synopsis

    dirs [options]

Print the directory stack, showing the current directory first. See also popd and pushd.

Options

-c

Clear the directory stack.

-l

Expand the home directory symbol (~) to the actual directory name.

-L file

Recreate stack from file, which should have been created by dirs -S file.

-n

Wrap output.

-S file

Print to file a series of pushd and popd commands that can be invoked to replicate the stack.

-v

Print one directory per line.

Name

echo

Synopsis

    echo [-n] string

Write string to standard output; if -n is specified, the output is not terminated by a newline. Set the echo_style shell variable to emulate BSD and/or System V echo flags and escape sequences. See also echo in Chapter 2 and Chapter 4.

Name

echotc

Synopsis

    echotc [options]arguments

Display terminal capabilities or move cursor on screen, depending on the argument.

Options

-s

Return empty string, not error, if capability doesn't exist.

-v

Display verbose messages.

Arguments

baud

Display current baud rate.

cols

Display current column.

cm column row

Move cursor to specified coordinates.

home

Move cursor to home position.

lines

Print number of lines per screen.

meta

Does this terminal have meta capacity (usually the Alt key)?

tabs

Does this terminal have tab capacity?

Name

else

Synopsis

    else

Reserved word for interior of if ... endif statement.

Name

end

Synopsis

    end

Reserved word that ends a foreach or while statement.

Name

endif

Synopsis

    endif

Reserved word that ends an if statement.

Name

endsw

Synopsis

    endsw

Reserved word that ends a switch statement.

Name

eval

Synopsis

    eval args

Typically, eval is used in shell scripts, and args is a line of code that may contain shell variables. eval forces variable expansion to happen first and then runs the resulting command. This "double scanning" is useful any time shell variables contain input/output redirection symbols, aliases, or other shell variables. (For example, redirection normally happens before variable expansion, so a variable containing redirection symbols must be expanded first using eval; otherwise, the redirection symbols remain uninterpreted.) A Bourne shell example can be found under eval in Chapter 4. A tcsh example of eval can be found under alias. Other uses of eval are shown next.

Examples

The following lines can be placed in the .login file to set up terminal characteristics:

    set noglob
    eval 'tset -s xterm'
    unset noglob

The following commands show the effect of eval:

    % set b='$a'
    % set a=hello
    % echo $b
                     Read the command line once
    $a
    % eval echo $b
                     Read the command line twice
    hello

Name

exec

Synopsis

    exec command [args ...]

Execute command in place of current shell. This terminates the current shell, rather than creating a new process under it.

Name

exit

Synopsis

    exit [expr]

Exit a shell script with the status given by expr. A status of zero means success; nonzero means failure. If expr is not specified, the exit value is that of the status variable. exit can be issued at the command line to close a window (log out).

Name

fg

Synopsis

    fg [jobIDs]

Bring the current job or the jobIDs to the foreground. jobID can be % job-number. See also the section "Job Control" earlier in this chapter.

Example

If you suspend a vi editing session (by pressing CTRL-Z), you might resume vi using any of these commands:

    % %
    % fg
    % fg %
    % fg %viMatch initial string

Name

filetest

Synopsis

    filetest -op files

Apply op file-test operator to files. Print results in a list. See the section "File inquiry operators" earlier in this chapter for the list of file-test operators.

Name

foreach

Synopsis

    foreach name (wordlist)
     commands
    end

Assign variable name to each value in wordlist and execute commands between foreach and end. You can use foreach as a multiline command issued at the shell prompt (first of the following examples), or you can use it in a shell script (second example).

Examples

Rename all files that begin with a capital letter:

    % foreach i ([A-Z]*)
    foreach? mv $i $i.old
    foreach?end

Check whether each command-line argument is an option or not:

    foreach arg ($argv)
       # does it begin with - ?
       if ("$arg" =~ -*) then
          echo "Argument is an option"
       else
          echo "Argument is a filename"
       endif
    end

Name

glob

Synopsis

    glob wordlist

Do filename, variable, and history substitutions on wordlist. This expands it much like echo, except that no \ escapes are recognized, and words are delimited by null characters. glob is typically used in shell scripts to "hardcode" a value so that it remains the same for the rest of the script.

Name

goto

Synopsis

    goto string

Skip to a line whose first nonblank word is string followed by a colon, and continue execution below that line. On the goto line, string can be a variable or filename pattern, but the label branched to must be a literal, expanded value and must not occur within a foreach or while.

Name

hashstat

Synopsis

    hashstat

Display statistics that show the hash table's level of success at locating commands via the path variable.

Name

history

Synopsis

    history [options]

Display the list of history events. (History syntax is discussed earlier in the section "Command History.")

Note: multiline compound commands such as foreach ... end are not saved in the history list. In general, the interactive command-line editing facilities are preferable to those of history and history substitution with the ! character.

Options

n

Display only the last n history commands, instead of the number set by the history shell variable.

-c

Clear history list.

-h

Print history list without event numbers.

-L file

Append the list of saved history commands in file to the history list.

-M file

Merge the current history list and the history list in file, sorted by time.

-r

Print in reverse order; show oldest commands last.

-S file

Save the history list to file. See also the savehist variable.

-T

Print with timestamp.

Example

To save and execute the last five commands:

    history -h 5 > do_it
    source do_it

Name

hup

Synopsis

    hup [command]

Start command but make it exit when sent a hangup signal, which is sent when shell exits. With no arguments, set the shell to exit on hangup signal. This latter form is allowed only in scripts.

Name

if

Synopsis

    if

Begin a conditional statement. The simple format is:

    if (expr)cmd

There are three other possible formats, shown side by side:

    if (expr) then   if (expr) then   if (expr) then
       cmds
                     cmds1
                     cmds1
    endif            else             else if (expr) then
                        cmds2
                     cmds2
                     endif            else
                                          cmds3
                                      endif

In the simplest form, execute cmds if expr is true, otherwise do nothing. (Even if expr is false, any redirection in cmd still occurs; this is a bug.) In the other forms, execute one or more commands. If expr is true, continue with the commands after then; if expr is false, branch to the commands after else or else if and continue checking. For more examples, see the section "Expressions" earlier in this chapter, or the shift or while commands.

Example

Take a default action if no command-line arguments are given:

    if ($#argv == 0) then
       echo "No filename given. Sending to Report."
       set outfile = Report
    else
       set outfile = $argv[1]
    endif

Name

jobs

Synopsis

    jobs [-l]

List all running or stopped jobs; -l includes process IDs. For example, you can check whether a long compilation or text format is still running. Also useful before logging out.

Name

kill

Synopsis

    kill [options]IDs

Terminate each specified process ID or job ID. You must own the process or be a privileged user. This built-in is similar to the external kill command described in Chapter 2 but also allows symbolic job names. See the kill entry in Chapter 2 for a list of commonly available signals and for the header files where the corresponding signal numbers may be found. Stubborn processes can be killed using signal 9. See also the earlier section "Job Control."

Options

-l

List the signal names. (Used by itself.)

-signal, -ssignal

Send the given signal to the jobs specified by IDs. The signal is either a signal number, or a signal name without the SIG prefix (e.g., HUP, not SIGHUP).

Examples

If you've issued the following command:

    44% nroff -ms report > report.txt &
    [1] 19536tcsh prints job and process IDs

you can terminate it in any of the following ways:

    45% kill 19536
                     Process ID
    45% kill %
                     Current job
    45% kill %1
                     Job number 1
    45% kill %nr
                     Initial string
    45% kill %?reportMatching string

Name

limit

Synopsis

    limit [-h] [resource [limit]]

Display limits or set a limit on resources used by the current process and by each process it creates. If no limit is given, the current limit is printed for resource. If resource also is omitted, all limits are printed. By default, the current soft limits are shown or set; with -h, hard limits are used. A soft limit may be increased or decreased without requiring special privileges. A hard limit imposes an absolute limit that can't be exceeded. Only a privileged user may raise it. See also unlimit.

Option

-h

Use hard, not soft, limits.

Resources

concurrency

Maximum number of per-process threads. Not available on all systems.

coredumpsize

Maximum size of a core dump file.

cputime

Maximum number of seconds the CPU can spend; can be abbreviated as cpu.

datasize

Maximum size of data (including stack).

descriptors

Maximum number of open files.

filesize

Maximum size of any one file.

maxproc

Maximum number of processes.

memorylocked

Maximum size a process can lock into memory.

memoryuse

Maximum amount of physical memory that can be allocated to a process.

sbsize

Maximum size of a socket buffer. Not available on all systems.

stacksize

Maximum size of stack.

vmemoryuse

Maximum amount of virtual memory that can be allocated to a process.

Limit

A number followed by an optional character (a unit specifier).

For cputime:

nh (for n hours)

nm (for n minutes)

mm:ss (minutes and seconds)

For others:

nk (for n kilobytes, the default)

nm (for n megabytes)

Name

log

Synopsis

    log

Consult the watch variable for list of users being watched. Print list of those who are presently logged in.

Name

login

Synopsis

    login [options] [user]

Replace a login shell with /bin/login. See the entry for login in Chapter 2 and your system's login manpage.

Name

logout

Synopsis

    logout

Terminate the login shell.

Name

ls-F

Synopsis

    ls-F [options] [files]

Faster alternative to ls -F. If given any options, invokes ls. See also the listlinks variable.

Name

newgrp

Synopsis

    newgrp [-] [group]

Change user's group ID to specified group ID or, if none is specified, to original group ID. If - is entered as an option, reset environment as if user had logged in with new group. Must have been compiled into the shell; see the version variable.

Name

nice

Synopsis

    nice [±n]command

Change the execution priority for command or, if none is given, change priority for the current shell. (See also nice in Chapter 2.) The priority range is -20 to 19, with a default of 4. The range is backwards from what you might expect: -20 gives the highest priority (fastest execution); 19 gives the lowest. Only a privileged user may specify a negative number.

+ n

Add n to the priority value (lower job priority).

- n

Subtract n from the priority value (raise job priority). Privileged users only.

Name

nohup

Synopsis

    nohup [command]

"No hangup signals." Do not terminate command after terminal line is closed (i.e., when you hang up from a phone or log out). Use without command in shell scripts to keep script from being terminated. (See also nohup in Chapter 2.)

Name

notify

Synopsis

    notify [jobID]

Report immediately when a background job finishes (instead of waiting for you to exit a long editing session, for example). If no jobID is given, the current background job is assumed.

Name

onintr

Synopsis

    onintr label
    onintr -
    onintr

"On interrupt." Used in shell scripts to handle interrupt signals (similar to the trap 2 and trap "" 2 commands in the Bourne shell). The first form is like a goto label. The script will branch to label : if it catches an interrupt signal (e.g., CTRL-C). The second form lets the script ignore interrupts. This is useful at the beginning of a script or before any code segment that must run unhindered (e.g., when moving files). The third form restores interrupt handling previously disabled with onintr -.

Example

onintr cleanup     Go to "cleanup" on interrupt
     .
     .                 Shell script commands
     .
    cleanup:           Label for interrupts
      onintr -         Ignore additional interrupts
      rm -f $tmpfiles  Remove any files created
      exit 2Exit with an error status

Name

popd

Synopsis

    popd [options]

Remove the current entry from the directory stack or remove the n th entry from the stack. The current entry has number zero and appears on the left. See also dirs and pushd.

Options

+ n

Specify nth entry.

-l

Expand ~ notation.

-n

Wrap long lines.

-p

Override the pushdsilent shell variable, which otherwise prevents the printing of the final stack.

-v

Print precisely one directory per line.

Name

printenv

Synopsis

    printenv [variable]

Print all (or one specified) environment variables and their values.

Name

pushd

Synopsis

    pushd [options] name
    pushd [options] +n
    pushd

The first form changes the working directory to name and adds it to the directory stack. The second form rotates the nth entry to the beginning, making it the working directory. (Entry numbers begin at zero.) With no arguments, pushd switches the first two entries and changes to the new current directory.

The -l, -n, and -v options behave the same as in popd. See also dirs and popd.

Examples

% dirs
    /home/bob /usr
    % pushd /etc
                     Add /etc to directory stack
    /etc /home/bob /usr
    % pushd +2
                     Switch to third directory
    /usr /etc /home/bob
    % pushd
                     Switch top two directories
    /etc /usr /home/bob
    % popd
                     Discard current entry; go to next
    /usr /home/bob

Name

rehash

Synopsis

    rehash

Recompute the internal hash table for the path variable. Use rehash whenever a new command is created during the current session. This allows the path variable to locate and execute the command. (If the new command resides in a directory not listed in path, add the directory to path before rehashing.) See also unhash.

Name

repeat

Synopsis

    repeat n command

Execute n instances of command.

Examples

Generate a test file for a program by saving 25 copies of /usr/dict/words in a file:

    % repeat 25 cat /usr/dict/words > test_file

Read 10 lines from the terminal and store in item_list:

    % repeat 10 line > item_list

Append 50 boilerplate files to report:

    % repeat 50 cat template >> report

Name

sched

Synopsis

    sched [options]
    schedtime command

Without options, print all scheduled events. The second form schedules an event. time should be specified in hh:mm form (e.g., 13:00).

Options

+hh:mm

Schedule event to take place hh:mm from now.

-n

Remove n th item from schedule.

Name

set

Synopsis

    set [-r] variable = value
    set [-r] variable[n] = value
    set [-f | -l] variable=(list)
    set [-r] variable
    set [-r]

Set variable to value or, if multiple values are specified, set the variable to the list of words in the value list. If an index n is specified, set the n th word in the variable to value. (The variable must already contain at least that number of words.) If only variable is specified, set the variable to null. With no arguments, display the names and values of all set variables. See also the section "Predefined Shell Variables," earlier in this chapter. Only one of -f or -l can be given.

Options

-f

When setting a variable to a list, remove duplicate words from the list, keeping only the first occurrence of a duplicate.

-l

When setting a variable to a list, remove duplicate words from the list, keeping only the last occurrence of a duplicate.

-r

List only read-only variables, or set specified variable to read-only.

Examples

% set list=(yes no maybe)
                     Assign a wordlist
    % set list[3]=maybe
                     Assign an item in existing wordlist
    % set quote="Make my day"
                     Assign a variable
    % set x=5 y=10 history=100
                     Assign several variables
    % set blankAssign a null value to blank

Name

setenv

Synopsis

    setenv [name [value]]

Assign a value to an environment variable name. By convention, name should be uppercase. value can be a single word or a quoted string. If no value is given, the null value is assigned. With no arguments, display the names and values of all environment variables. A number of environment variables are automatically exported from the corresponding shell variables; see the earlier section "Environment Variables."

Name

settc

Synopsis

    settc capability value

Set terminal capability to value.

Name

setty

Synopsis

    setty [options] [±mode]

Do not allow shell to change specified tty modes. There are three sets of modes, edit, quote, and execute. By default, act on the execute set.

Options

+ mode

Without arguments, list all modes in specified set that are on. Otherwise, turn on specified mode.

- mode

Without arguments, list all modes in specified set that are off. Otherwise, turn off specified mode.

-a

List all modes in specified set.

-d

Act on the edit set of modes (used when editing commands).

-q

Act on the quote set of modes (used when entering characters verbatim).

-x

Act on the execute set of modes (used when executing commands). This is the default.

Name

shift

Synopsis

    shift [variable]

If variable is given, shift the words in a word list variable; e.g., assuming a wordlist variable named offices, offices[2] becomes offices[1]. With no argument, shift the positional parameters (command-line arguments); i.e., $2 becomes $1. shift is typically used in a while loop. See additional example under while.

Example

while ($#argv)      While there are arguments
        if (-f $argv[1])
           wc -l $argv[1]
        else
           echo "$argv[1] is not a regular file"
        endif
        shift           Get the next argument
    end

Name

source

Synopsis

    source [-h] script [args]

Read and execute commands from a shell script. With -h, the commands are added to the history list but aren't executed. Arguments can be passed to the script and are put in argv.

Example

% source ~/.tcshrc

Name

stop

Synopsis

    stop jobIDs

Stop the background jobs specified by jobIDs; this is the complement of CTRL-Z or suspend.

Name

suspend

Synopsis

    suspend

Suspend the current foreground job; similar to CTRL-Z. Often used to stop an su command.

Name

switch

Synopsis

    switch

Process commands depending on a string value. When you need to handle more than three choices, switch is a useful alternative to an if-then-else statement. If the string matches pattern1, the first set of commands executes; if string matches pattern2, the second set of commands executes; and so on. If no patterns match, the set of commands under the default case executes. string can be specified using command substitution, variable substitution, or filename expansion. Patterns can be specified using the pattern-matching symbols *, ?, [, and ]. breaksw exits the switch after commands are executed. If breaksw is omitted (which is rarely done), the switch continues to execute another set of commands until it reaches a breaksw or endsw. Here is the general syntax of switch, side-by-side with an example that processes the first command-line argument.

    switch (string)       switch ($argv[1])
      case pattern1:        case -[nN]:
          commands              nroff $file | lp
          breaksw               breaksw
      case pattern2:        case -[Pp]:
          commands              pr $file | lp
          breaksw               breaksw
      case pattern3:        case -[Mm]:
          commands              more $file
          breaksw               breaksw
          .                 case -[Ss]:
          .                     sort $file
          .                     breaksw
      default:              default:
          commands              echo "Error—no such option"
                                exit 1
          breaksw               breaksw
    endsw                 endsw

Name

telltc

Synopsis

    telltc

Print all terminal capabilities and their values.

Name

termname

Synopsis

    termname [termtype]

Check the termcap or terminfo database to see if termtype exists. With no argument, use the current value of the TERM variable. This command prints the termtype to standard output and returns zero if the terminal type is found in the database, one otherwise.

Name

time

Synopsis

    time [command]

Execute a command and show how much time it uses. With no argument, time can be used in a shell script to time the script.

Name

umask

Synopsis

    umask [nnn]

Display file-creation mask or set file-creation mask to octal nnn. The file-creation mask determines which permission bits are turned off. With no nnn, print the current mask. See the umask entry in Chapter 2 for examples.

Name

unalias

Synopsis

    unalias pattern

Remove all aliases whose names match pattern from the alias list. See alias for more information.

Name

uncomplete

Synopsis

    uncomplete pattern

Remove completions (specified by complete) whose names match pattern.

Name

unhash

Synopsis

    unhash

Stop using the internal hash table. The shell stops using hashed values and searches the path directories to locate a command. See also rehash.

Name

unlimit

Synopsis

    unlimit [-h] [resource]

Remove the allocation limits on resource. If resource is not specified, remove limits for all resources. See limit for more information. With -h, remove hard limits. Removing hard limits can be done only by a privileged user.

Name

unset

Synopsis

    unset variables

Remove one or more variables. Variable names may be specified as a pattern, using filename metacharacters. Does not remove read-only variables. See set.

Name

unsetenv

Synopsis

    unsetenv variables

Remove one or more environment variables. Variable names may be specified as a pattern, using filename metacharacters. See setenv.

Name

wait

Synopsis

    wait

Pause in execution until all child processes complete, or until an interrupt signal is received.

Name

watchlog

Synopsis

    watchlog

Same as log. Must have been compiled into the shell; see the version shell variable.

Name

where

Synopsis

    where command

Display all aliases, built-in commands, and executables named command found in the path.

Name

which

Synopsis

    which command

Report which version of command will be executed. Same as the external executable which, but faster, and checks tcsh built-ins.

Name

while

Synopsis

    while (expression)
     commands
    end

As long as expression is true (evaluates to nonzero), evaluate commands between while and end. break and continue can be used to terminate or continue the loop. See also the example under shift.

Example

set user = (alice bob carol ted)
    while ($argv[1] != $user[1])
       Cycle through each user, checking for a match
       shift user
       If we cycled through with no match...
       if ($#user == 0) then
         echo "$argv[1] is not on the list of users"
         exit 1
       endif
    end

Chapter 6. Package Management

Package management systems automate the installation, removal and upgrade of software. Different systems do things in similar but not identical ways. GNU/Linux systems have the most highly developed package management systems. This chapter describes the facilities available for Linux, Solaris, and Mac OS X. It presents the following topics:

Linux package management

The Red Hat package manager

Yum: Yellowdog Updater Modified

up2date: Red Hat update agent

The Debian package manager

Mac OS X package management

Solaris package management

Linux Package Management

This chapter describes the two major Linux packaging systems: the Red Hat Package Manager (RPM) and the Debian GNU/Linux Package Manager. It also describes the major frontend applications designed to simplify and automate package management: yum and up2date for RPM-based systems, aptitude and synaptic for Debian-based systems, and apt, which is a Debian package management tool that is now also available for RPM-based systems.

When you install applications on your Linux system, most often you'll find a binary or a source package containing the application you want, instead of (or in addition to) a .tar.gz file. A package is a file containing the files necessary to install an application. However, while the package contains the files you need for installation, the application might require the presence of other files or packages that are not included, such as particular libraries (and even specific versions of the libraries), to actually be able to run. Such requirements are known as dependencies .

Package management systems offer many benefits. As a user, you may want to query the package database to find out what packages are installed on the system and their versions. As a system administrator, you need tools to install and manage the packages on your system. And if you are a developer, you need to know how to build a package for distribution.

Among other things, package managers do the following:

Provide tools for installing, updating, removing, and managing the software on your system.

Allow you to install new or upgraded software directly across a network.

Tell you what software package a particular file belongs to or what files a package contains.

Maintain a database of packages on the system and their status, so that you can determine what packages or versions are installed on your system.

Provide dependency checking, so that you don't mess up your system with incompatible software.

Provide GPG, PGP, MD5, or other signature verification tools.

Provide tools for building packages.

Any user can list or query packages. However, installing, upgrading, or removing packages generally requires root privileges. This is because the packages normally are installed in system-wide directories that are writable only by root. Sometimes you can specify an alternate directory to install a package into your home directory or into a project directory where you have write permission, if you aren't running as root.

Signature verification is an important feature of package management systems that helps maintain the security of your system. An MD5 checksum is used to check the integrity of a package, making sure, for example, that it was downloaded correctly and that it has not been tampered with by a malicious user. GPG (and PGP) encrypt a digital signature into the package, which is used to verify the authenticity of the package creator.

Most often you'll install a binary package, where the source code has been compiled and the software is ready to run once it is installed. You may also want or need to install source packages, which provide the source code and instructions for compiling and installing the program. Source code packages do not contain executable files. Packages follow certain naming conventions, and you can tell from the name whether it is a binary or source package. RPM and Debian package names contain the same information, but they are expressed slightly differently. An RPM package has the form:

package-version-release.architecture.rpm

A Debian package has the form:

package_version-revision_architecture.deb

In both cases, package is the name of the package, version is the version number of the software, release (RPM) and revision (Debian) indicate the revision number of the package for that version, and architecture shows what system architecture the software was packaged for (e.g., i386 or m68k). The value of architecture may also be noarch for a package that is not hardware-specific or src for an RPM source package (Debian source packages come as tarred, gzipped files).

All the package managers check for dependencies when you install a package. In the case of RPM, if there are missing dependencies, it prints an error and terminates without installing the package. To proceed, you need to first install the missing package (or packages). This can become an involved process if the missing package has its own dependencies. A major advantage of the high-level package managers described in this chapter (i.e., apt, yum, up2date, synaptic, and aptitude) is that they automatically resolve dependencies and install missing packages for you. Another advantage is that they locate and download the package automatically, based on information in configuration files specifying where to look for packages. With RPM, you first have to locate the package, then download it, and only then can you run rpm to do the install. On the other hand, if you already have the package file on your system or on a CD, rpm is quick and easy to run.

Both RPM and the apt system back up old files before installing an updated package. Not only does this let you go back if there is a problem, but it also ensures that you don't lose your changes (to configuration files, for example).

The following list shows the package management programs described in the rest of this chapter. Which program to use is very much a matter of personal preference, and you can use more than one at different times. However, it's best to pick the program you prefer and use it consistently, so that all your packages are maintained in a single database that you can query.

The Advanced Package Tool (APT)

APT is a modern, user-friendly package management tool that consists of a number of commands. The most frequently used of these commands is apt-get, which is used to download and install a Debian package. apt-get can be run from the command line or selected as a method from dselect. One of the features of apt-get is that you can use it to get and install packages across the Internet by specifying an FTP or HTTP URL. You can also use it to upgrade all packages currently installed on your system in a single operation.

Note that there are versions of the apt commands that can be used on an RPM-based system. If you plan to do that, it's best to install the version of apt that comes with your Linux distribution.

aptitude

High-level text-based interface to APT. Runs either from the command line or in a visual mode inside a terminal window such as an xterm.

dpkg

The original Debian packaging tool. Used to install or uninstall packages or as a frontend to dpkg-deb. Getting and installing packages is usually done with apt-get, but dpkg is still commonly used to install a package that is already on your system. In fact, apt-get calls dpkg to do the installation once it's gotten the package.

dpkg-deb

Lower-level packaging tool. Used to create and manage the Debian package archives. Accepts and executes commands from dpkg or can be called directly.

dselect

An interactive frontend to dpkg. With the advent of the newer tools and the increased number of packages, the use of dselect is deprecated.

RPM

The original command-line system for installing and managing RPM packages. RPM has two commands, rpm for installing and managing packages, and rpmbuild for creating packages.

synaptic

A graphical frontend to APT.

up2date

A graphical frontend to RPM.

yum

A frontend to RPM that runs from the command line.

If you want to update your system daily, to keep it current and to be sure you have the latest security fixes, you can set up a command that you can reissue every day, or you can set it up as a cron job to run overnight. (See the description of the crontab command in Chapter 2 for more information on setting up a cron job.)

For example, with apt-get, you can set up the command:

apt-get update && apt-get -u dist-upgrade

This command runs apt-get twice; first to update the local package lists and then to actually do the upgrade. The dist-upgrade command handles all dependencies when it does the upgrade, and the -u option prints a list of the packages being upgraded.

yum, on the other hand, comes with a cron job that can be run daily. This job first updates yum itself, then updates all the remaining packages:

#!/bin/sh
if [ -f /var/lock/subsys/yum ]; then
        /usr/bin/yum -R 10 -e 0 -d 0 -y update yum
        /usr/bin/yum -R 120 -e 0 -d 0 -y update
fi

The -R option sets a maximum time, in minutes, for yum to wait before running the command, -e sets the error level to 0 to print only critical errors, -d specifies a debug level of 0 to print no debugging messages, and -y assumes "yes" as the answer to any questions.

The Red Hat Package Manager

The Red Hat Package Manager (RPM) is a freely available packaging system for software distribution and installation. In addition to the Red Hat Enterprise Linux and Fedora Core distributions, both SuSE and Mandrake are among the Linux distributions that use RPM.

Using RPM is straightforward. A single command, rpm, has options to perform all package management functions except building packages.[*] For example, to find out if the Emacs editor is installed on your system, you could say:

$ rpm -q emacs
emacs-21.3-17

This command prints the full package name, confirming its presence.

You use the rpmbuild command to build both binary and source packages.

RPM Package Concepts

This section provides an overview of some of the parts of an RPM package. Much of the information is of primary use to developers, but because some of the terms are referenced in the RPM command descriptions, they are explained briefly here.

An RPM package has three primary components. The header contains all the information about the package, such as its name and version, a description, a list of included files, the copyright terms, and where the source file can be found. The signature contains information used to verify the integrity and authenticity of the package. The archive contains the actual files that make up the package.

When a package is being built, one of the requirements for the developers is to create a spec file. If you download the source RPM for a package, you can look at the spec file; it has a filename of package .spec (e.g., yum.spec for the yum spec file). The spec file contains all the information required for building a package, including a description of the software, instructions telling the rpmbuild command how to build the package, and a list of the files included and where they get installed. Some other features of spec files include the following:

Macros

Macros are sequences of commands stored together and executed by invoking the macro name. The RPM build process provides two standard macros , %setup to unpack the original sources and %patch to apply patches. Other macros appear later in this chapter in the command descriptions and are described there.

Scripts

Scripts are used to control the build process. Some of the scripts RPM uses include %prep to begin the build process, %build primarily to run make and perhaps do some configuration, %install to do a make install and %clean to clean up afterwards. Four additional scripts may be created to run when a package is actually installed on a system. These scripts are %pre for scripts run before package installation, %post for scripts run after package installation, %preun for scripts run before a package is uninstalled, and %postun for scripts run after a package is uninstalled.

Trigger scriptlets

Trigger scriptlets are extensions of the normal install and uninstall scripts. They provide for interaction between packages. A trigger scriptlet provided with one package will be triggered to run by the installation or removal of some other package. For example, a newly installed RPM package may cause an existing application to run or restart once installation is complete. In many cases, a newly installed package requires services to be restarted.

The rpm Command

RPM packages are installed and queried with the rpm command. RPM package filenames usually end with a .rpm extension. rpm has a set of modes, each with its own options. The format of the rpm command is:

rpm [options] [packages]

With a few exceptions, as noted in the lists of options that follow, the first option specifies the rpm mode (install, query, update, etc.), and any remaining options affect that mode.

Options that refer to packages are sometimes specified as package-name and sometimes as package-file. The package name is the name of the program or application, such as xpdf. The package file is the name of the RPM file, such as xpdf-3.00-10.1.i386.rpm.

RPM provides a configuration file for specifying frequently used options. The default global configuration file is usually /usr/lib/rpm/rpmrc, the local system configuration file is /etc/rpmrc, and users can set up their own $HOME/.rpmrc files. You can use the --showrc option to show the values RPM will use by default for all the options that may be set in an rpmrc file:

rpm --showrc

The rpm command includes FTP and HTTP clients, so you can specify an ftp:// or http:// URL to install or query a package across the Internet. You can use an FTP or HTTP URL wherever package-file is specified in the commands presented here. Be careful, however, when downloading packages from the Internet. Always verify package contents by checking MD5 checksums and signatures. Whenever possible, install from trusted media.

Any user can query the RPM database. Most of the other functions, such as installing and removing packages, require superuser privileges.

General options

The following options can be used with all modes:

--dbpath path

Use path as the path to the RPM database instead of the default /var/lib/rpm.

-?, --help

Print a long usage message (running rpm with no options gives a shorter usage message).

--quiet

Display only error messages.

--rcfile filelist

Get configuration from the files in the colon-separated filelist. If --rcfile is specified, there must be at least one file in the list and the file must exist. filelist defaults to /usr/lib/rpm/rpmrc:/usr/lib/rpm/redhat/rpmrc:/etc/rpmrc:~/.rpmrc. Use with --showrc to see what options will be used if alternate configuration files are specified.

--root dir

Perform all operations within the directory tree rooted at dir.

-v

Verbose. Print progress messages.

--version

Print the version number of rpm.

-vv

Print debugging information. Each additional v character makes rpm be more verbose.

Install, upgrade, and freshen options

Use the install command to install or upgrade an RPM package. Upgrading with install leaves any existing versions on the system. The install syntax is:

rpm -i [install-options] package_file ...
rpm --install [install-options] package_file ...

To install a new version of a package and remove an existing version at the same time, use the upgrade option instead:

rpm -U [install-options] package_file ...
rpm --upgrade [install-options] package_file ...

If the package doesn't already exist on the system, -U acts like -i and installs it. To prevent that behavior, you can freshen a package instead; in that case, rpm upgrades the package only if an earlier version is already installed. The freshen syntax is:

rpm -F [install-options] package_file ...
rpm --freshen [install-options] package_file ...

For all forms, package-file can be specified as an FTP or HTTP URL to download the file before installing it. See the section "FTP/HTTP options," later in this chapter.

The installation and upgrade options are:

--aid

If rpm suggests additional packages, add them to the list of package files.

--allfiles

Install or upgrade all files.

--badreloc

Used with --relocate to force relocation even if the package is not relocatable.

--excludedocs

Don't install any documentation files.

--excludepath path

Don't install any file whose filename begins with path.

--force

Force the installation. Equivalent to --replacepkgs --replacefiles --oldpackage.

-h, --hash

Print 50 hash marks as the package archive is unpacked. Can be used with -v or --verbose for a nicer display.

--ignorearch

Install even if the binary package is intended for a different architecture.

--ignoreos

Install binary package even if the operating systems don't match.

--ignoresize

Don't check disk space availability before installing.

--includedocs

Install documentation files. This is needed only if excludedocs: 1 is specified in an rpmrc file.

--justdb

Update the database only; don't change any files.

--nodeps

Don't check whether this package depends on the presence of other packages.

--nodigest

Don't verify package or header digests.

--noorder

Don't reorder packages to satisfy dependencies before installing.

--nopost

Don't execute any post-install script.

--nopostun

Don't execute any post-uninstall script.

--nopre

Don't execute any pre-install script.

--nopreun

Don't execute any pre-uninstall script.

--noscripts

Don't execute any pre-install or post-install scripts. Equivalent to --nopre --nopost --nopreun --nopostun.

--nosignature

Don't verify package or header signatures.

--nosuggest

Don't suggest packages that provide a missing dependency.

--notriggerin

Don't execute any install trigger scriptlet.

--notriggerun

Don't execute any uninstall trigger scriptlet.

--notriggerpostun

Don't execute any post-uninstall trigger scriptlet.

--notriggers

Don't execute any scripts triggered by package installation. Equivalent to --notriggerin --notriggerun --notriggerpostun.

--oldpackage

Allow an upgrade to replace a newer package with an older one.

--percent

Print percent-completion messages as files are unpacked. Useful for running rpm from other tools.

--prefix path

Set the installation prefix to path for relocatable binary packages.

--relocate oldpath = newpath

For relocatable binary files, change all file paths from oldpath to newpath. Can be specified more than once to relocate multiple paths.

--repackage

Repackage the package files before erasing an older version, to save the package in case a transaction rollback is necessary. Rename the package as specified by the macro %_repackage_name_fmt and save it in the directory specified by the macro %_repackage_dir (by default /var/spool/repackage). The repackaged file is not identical to the original package.

--replacefiles

Install the packages even if they replace files from other installed packages.

--replacepkgs

Install the packages even if some of them are already installed.

--test

Go through the installation to see what it would do, but don't actually install the package. This option lets you test for problems before doing the installation.

Query options

The syntax for the query option is:

rpm -q [package-options] [information-options]
rpm --query [package-options] [information-options]

There are two subsets of query options . Package selection options determine what packages to query, and information selection options determine what information to provide.

Here are the package selection options :

package_name

Query the installed package package_name.

-a, --all

Query all installed packages.

-ffile, --filefile

Find out what package owns file.

--fileid md5

Query package with the specified MD5 checksum.

-ggroup, --groupgroup

Find out what packages have group group.

--hdrid sha1

Query package with the specified SHA1 digest in the package header.

-ppackage_file, --packagepackage_file

Query the uninstalled package package_file, which can be a URL. If package_file is not a binary package, it is treated as a text file containing a package manifest, with each line of the manifest containing a path or one or more whitespace-separated glob expressions to be expanded to paths. These paths are then used instead of package_file as the query arguments. The manifest can contain comments that begin with a hash mark (#).

--pkgid md5

Query the package with a package identifier that is the given MD5 checksum of the combined header and contents.

--querybynumber num

Query the numth database entry. Useful for debugging.

-qfstring, --queryformatstring

Specify the format for displaying the query output, using tags to represent different types of data (e.g., NAME, FILENAME, DISTRIBUTION). The format specification is a variation of the standard printf formatting, with the type specifier omitted and replaced by the name of the header tag enclosed in curly braces ({...}). For example:

%{NAME}

The tag names are case-insensitive. Use --querytags (see the later section "Miscellaneous options") to view a list of available tags. The tag can be followed by :type to get a different output format type. The possible types are:

:armor

Wrap a public key in ASCII armor.

:base64

Encode binary data as base64.

:date

Use "%c" format as in strftime(3) to display the preferred date and time format for this locale.

:day

Use "%a %b %d %Y" format as in the function strftime(3). This format displays the day of the week, the day of the month, the month as a decimal number, and the four-digit year.

:depflags

Format dependency flags.

:fflags

Format file flags.

:hex

Use hexadecimal format.

:octal

Use octal format.

:perms

Format file permissions.

:shescape

Escape single quotes for use in a script.

:triggertype

Display trigger suffix (i.e., in, un, or postun, indicating whether it's an install, uninstall, or post-uninstall trigger).

--specfile specfile

Query specfile as if it were a package. Useful for extracting information from a spec file.

--tid tid

List packages with the specified transaction identifier (tid). The tid is a Unix timestamp. All packages installed or erased in a single transaction have the same tid.

--triggeredby pkg

List packages containing triggers that are run when the installation status of package pkg changes. For example:

$ rpm -q --triggeredby glibc
redhat-lsb-1.3-4

In this example, the package redhat-lsb-1.3.4 contains a triggerpostun scriptlet that runs after glibc is uninstalled.

--whatrequires capability

List packages that require the given capability to function. For example:

$ rpm -q --whatrequires popt
rpm-4.3.2-21
gstreamer-0.8.7-3
librsvg2-2.8.1-1
planner-0.12.1-1

--whatprovides capability

List packages that provide the given capability. For example:

$ rpm -q --whatprovides popt
popt-1.9.1-21

Here are the information selection options :

-c, --configfiles

List configuration files in the package. Implies -l.

--changelog

Display the log of change information for the package.

-d, --docfiles

List documentation files in the package. Implies -l.

--dump

Dump information for each file in the package. This option must be used with at least one of -l, -c, or -d. The output includes the following information in this order:

path size mtime md5sum mode owner group isconfig isdoc rdev symlink

--filesbypkg

List all files in each package.

-i, --info

Display package information, including the name, version, and description. Formats the results according to --queryformat if specified.

-l, --list

List all files in the package.

--last

List packages by install time, with the latest packages listed first.

--provides

List the capabilities this package provides.

-R, --requires

List any packages this package depends on.

-s, --state

List each file in the package and its state. The possible states are normal, not installed, or replaced. Implies -l.

--scripts

List any package-specific shell scripts used during installation and uninstallation of the package.

--triggers, --triggerscript

Display any trigger scripts in the package.

Uninstall options

The syntax for the erase (uninstall) option is:

rpm -e [uninstall-options] package_name ...
rpm --erase [uninstall-options] package_name ...

The uninstall options are:

--allmatches

Remove all versions of the package. Only one package should be specified; otherwise, an error results.

--nodeps

Don't check dependencies before uninstalling the package.

--nopostun

Don't run any post-uninstall scripts.

--nopreun

Don't run any pre-uninstall scripts.

--noscripts

Don't execute any pre-uninstall or post-uninstall scripts. Equivalent to --nopreun --nopostun.

--notriggerpostun

Don't execute any post-uninstall scripts triggered by the removal of this package.

--notriggers

Don't execute any scripts triggered by the removal of this package. Equivalent to --notriggerun --notriggerpostun.

--notriggerun

Don't execute any uninstall scripts triggered by the removal of this package.

--repackage

Repackage the files before uninstalling them, to save the package in case a transaction rollback is necessary. Rename the package as specified by the macro %_repackage_name_fmt and save it in the directory specified by the macro %_repackage_dir (by default /var/spool/repackage). The repackaged file is not identical to the original package file.

--test

Don't really uninstall anything; just go through the motions. Use with -vv for debugging.

Verify options

The syntax for the verify option is:

rpm -V [package-selection-options] [verify-options]
rpm --verify [package-selection-options] [verify-options]

Verify mode compares information about the installed files in a package with information about the files that came in the original package, and displays any discrepancies. The information compared includes the size, MD5 checksum, permissions, type, owner, and group of each file. Uninstalled files are ignored.

The package selection options include those available for query mode. In addition, the following verify options are available:

--nodeps

Ignore package dependencies.

--nodigest

Ignore package or header digests.

--nofiles

Ignore attributes of package files.

--nogroup

Ignore group ownership errors.

--nolinkto

Ignore symbolic link errors.

--nomd5

Ignore MD5 checksum errors.

--nomode

Ignore file mode (permissions) errors.

--nordev

Ignore major and minor device number errors.

--nomtime

Ignore modification time errors.

--noscripts

Ignore any verify script.

--nosignature

Ignore package or header signatures.

--nosize

Ignore file size errors.

--nouser

Ignore user ownership errors.

The output is formatted as an eight-character string, possibly followed by an attribute marker, and then the filename. Each of the eight characters in the string represents the result of comparing one file attribute to the value of that attribute from the RPM database. A period (.) indicates that the file passed that test. The following characters indicate failure of the corresponding test:

5

MD5 checksum

D

Device

G

Group

L

Symlink

M

Mode (includes permissions and file type)

S

File size

T

Modification time

U

User

The possible attribute markers are:

c

Configuration file

d

Documentation file

g

Ghost file (contents not included in package)

l

License file

r

Readme file

Database rebuild options

The syntax of the command to rebuild the RPM database is:

rpm --rebuilddb [options]

You also can build a new database:

rpm --initdb [options]

The options available with the database rebuild mode are the --dbpath, --root, and -v options described in the earlier section "General options."

Signature check options

RPM packages may have a GPG signature built into them. There are three types of digital signature options: you can check signatures, add signatures to packages, and import signatures.

The syntax of the signature check mode is:

rpm --checksig [options] package_file ...
rpm -K [options] package_file ...

The signature-checking options -K and --checksig check the digests and signatures contained in the specified packages to insure the integrity and origin of the packages. Note that RPM now automatically checks the signature of any package when it is read; this option is still useful, however, for checking all headers and signatures associated with a package.

The --nosignature and --nodigest options described in the earlier section "Install, upgrade, and freshen options," are available for use with signature check mode.

The syntax for adding signatures to binary packages is:

rpm --addsign binary-pkgfile ...
rpm --resign binary-pkgfile ...

Both --addsign and --resign generate and insert new signatures, replacing any that already exist in the specified binary packages.[*]

The syntax for importing signatures is:

rpm --import public-key

The --import option is used to import an ASCII public key to the RPM database so that digital signatures for packages using that key can be verified. Imported public keys are carried in headers, and keys are kept in a ring, which can be queried and managed like any package file.

Miscellaneous options

Several additional rpm options are available:

--querytags

Print the tags available for use with the --queryformat option in query mode.

--setperms packages

Set file permissions of the specified packages to those in the database.

--setugids packages

Set file owner and group of the specified packages to those in the database.

--showrc

Show the values rpm will use for all options that can be set in an rpmrc file.

FTP/HTTP options

The following options are available for use with FTP and HTTP URLs in install, update, and query modes.

--ftpport port

Use port for making an FTP connection on the proxy FTP server instead of the default port. Same as specifying the macro %_ftpport.

--ftpproxy host

Use host as the proxy server for FTP transfers through a firewall that uses a proxy. Same as specifying the macro %_ftpproxy.

--httpport port

Use port for making an HTTP connection on the proxy HTTP server instead of the default port. Same as specifying the macro %_httpport.

--httpproxy host

Use host as the proxy server for HTTP transfers. Same as specifying the macro %_httpproxy.

RPM Examples

Query the RPM database to find Emacs-related packages:

rpm -q -a | grep emacs

Query an uninstalled package, printing information about the package and listing the files it contains:

rpm -qpil ~/downloads/bash2-doc-2.03-8.i386.rpm

Install a package (assumes superuser privileges):

rpm -i sudo-1.6.7p5-30.1.i386.rpm

Do the same thing, but report on the progress of the installation:

rpm -ivh sudo-1.6.7p5-30.1.i386.rpm

The rpmbuild Command

The rpmbuild command is used to build RPM packages. The syntax for rpmbuild is:

rpmbuild -bstage [build-options] spec-file ...
rpmbuild -tstage [build-options] spec-file ...

Specify -b to build a package directly from a spec file, or -t to open a tarred, gzipped file and use its spec file.

Both forms take the following single-character stage arguments, which specify the stages, or steps, required to build a package. The stages are listed in the order they would be performed:

p

Perform the prep stage, unpacking source files and applying patches.

l

Do a list check, expanding macros in the files section of the spec file and verifying that each file exists.

c

Perform the prep and build stages; generally equivalent to running make.

i

Perform the prep, build, and install stages; generally equivalent to running make install.

b

Perform the prep, build, and install stages, then build a binary package.

s

Build a source package.

a

Perform the prep, build, and install stages, then build both binary and source packages.

The difference between the build stage, which is one of the early steps, and building a binary package in b or a is the difference between building a working binary for the software and putting all the pieces together into a final rpm package.

rpmbuild options

The general rpm options described in the earlier section "General options" can be used with rpmbuild. The following additional options can also be used when building an RPM file with rpmbuild:

--buildroot dir

Override the BuildRoot tag with dir when building the package.

--clean

Clean up (remove) the build files after the package has been made.

--nobuild

Go through the motions, but don't execute any build stages. Used for testing spec files.

--rmsource

Remove the source files when the build is done. Can be used as a standalone option with rpmbuild to clean up files separately from creating the packages.

--rmspec

Remove the spec file when the build is done. Like --rmsource, --rmspec can be used as a standalone option with rpmbuild.

--short-circuit

Can be used with -bc and -bi to skip previous stages that already ran successfully. With --short-circuit, -bc starts directly at the build stage and -bi starts with the install stage.

--sign

Add a GPG signature to the package for verifying its integrity and origin.

--target platform

When building the package, set the %_target, %_target_arch, and %_target_os macros to the value indicated by platform.

Two other options can be used standalone with rpmbuild to recompile or rebuild a package:

--rebuildsource-pkgfile ...

Like --recompile, but also build a new binary package. Remove the build directory, the source files, and the spec file once the build is complete.

--recompilesource-pkgfile ...

Install the named source package, and prep, compile, and install the package.

Finally, the --showrc option shows the current rpmbuild configuration:

rpmbuild --showrc

This option shows the values that will be used for all options that can be set in an rpmrc file.

[*] In older versions of RPM, the build options were part of the rpm command.

[*] In older versions of RPM, --addsign was used to add new signatures without replacing existing ones, but currently both options work the same way and replace any existing signatures.

Yum: Yellowdog Updater Modified

Yum is a system for managing RPM packages, including installing, updating, removing, and maintaining packages; it automatically handles dependencies between packages. Yum is derived from yup, an updating system written for Yellow Dog Linux, an RPM-based Macintosh distribution. Yum downloads the information in the package headers to a directory on your system, which it then uses to make decisions about what it needs to do. Yum obtains both the headers and the RPMs themselves from a collection of packages on a server, known as a repository.

A repository consists of a set of RPM packages and the package headers on a server that can be accessed via FTP or HTTP, from an NFS server, or from a local filesystem. A single server can contain multiple repositories, repositories are often mirrored on many servers, and you can configure yum to use multiple repositories. When they are downloaded to your system, the header and package files are maintained in /var/cache/yum.

The configuration file, /etc/yum.conf, is where you customize yum. It consists of two section types. The first section, [main], sets configuration defaults for yum operation. This section is followed by [ server ] sections, where each server is named according to the repository it specifies. For example, for Fedora Core, you might have [base] for the base Fedora Core repository and [development] for the development repository.

The server sections can also be stored, one to a file, in /etc/yum.repos.d. yum comes with a default yum.conf file, which you can use as-is or as a starting point from which to add additional repositories.

The yum Command

The yum command is an automated system for updating rpm-based packages, particularly on Fedora Core and Red Hat Enterprise Linux. Yum can automatically install, upgrade, and remove packages. In addition to individual packages or a list of packages, yum can operate on an entire group of packages at a time.

When you run yum, it first updates the cache (unless you tell it not to with the -C option), then it proceeds to perform the requested operation.

The format of the yum command is:

yum [options] [command] [package ...]

Any general options are specified first, followed by a command telling yum what you want it to do, usually followed by a list of one or more packages. The command is always required, except with the --help, -h, and --version options.

Package names can be specified in various combinations of name, architecture, version, and release. For example, you could refer to the bash package as bash, bash.i386, bash-3.0, bash-3.0-17, or bash-3.0-17.i386.

General options

The following general options can be set on the command line. For those that can also be set in the [main] section of the yum.conf configuration file, the name of the configuration option is given.

-c config-file

Specify the location of the yum configuration file. The file can be specified as a path to a local file or as an HTTP or FTP URL. The default is /etc/yum.conf.

-C

Run entirely from the local cache. Don't download or update headers unless required to complete the requested action.

-d num

Set the debug level to num, which is generally a number between 0 and 10, to specify how much debugging information to print. The configuration option is debuglevel.

--disablerepo= repoid

Disable the repository specified by repoid so yum won't use it for this operation. The configuration option is enabled.

-e num

Set the error level to num, where num is a number, generally between 0 and 10. If the value is 0, print only critical errors. If it is 1, print all errors. Values greater than 1 mean print more errors, if there are any.

--enablerepo= repoid

Enable the specified repository that is marked as disabled (enable=0) in the configuration file. This allows the repository to be used for this operation. The configuration option is enabled.

--exclude= package

Exclude the specified package from updates on all repositories. package can be given as a name or a glob. The configuration option is exclude.

-h, --help

Display a help message and exit.

--installroot= root

Specify an alternative root for package installation. All packages will be installed relative to root. The configuration option is installroot.

--obsoletes

Enable obsoletes processing logic, taking into consideration packages that are obsoleted by other packages in the repository. Only meaningful with the yum update command. The configuration option is obsoletes.

-R min

Set the maximum amount of time in minutes that yum will wait before performing a command.

--rss-filename= filename

Use filename as the output file for the generate-rss command. The configuration option is rss-filename.

-t, --tolerant

Keep going (be tolerant) if there are package errors on the command line. This allows yum to continue processing other packages even if there is a problem with one package (e.g., trying to install a package that is already installed). The configuration option is tolerant.

-y

Assume that the answer to any question is yes. The configuration option is assumeyes.

Yum Command Summary

The individual yum commands are listed here.

Name

check-update

Synopsis

check-update

Determine if updates are available, without running yum interactively. If any package updates are available, return an exit value of 100 and a list of packages. If there are no updates, return 0.

Name

clean

Synopsis

clean [options]

Clean up the yum cache directory.

Options

all

Clean everything: headers, packages, metadata, and the cache.

cache

Clean up the cache.

headers

Remove all header files, forcing yum to download new headers the next time it runs.

metadata

Remove the metadata files, which maintain information about the packages such as package name, file size, description, dependencies, etc.

packages

Remove cached packages.

Name

generate-rss

Synopsis

generate-rss [updates]

Create an rss file that lists changelogs for all packages in the enabled repositories. If updates is specified, the rss file lists only updates that apply to your system.

Name

groupinfo

Synopsis

groupinfo groups

Like info, but operates on package groups instead of individual packages.

Name

groupinstall

Synopsis

groupinstall groups

Like install, but operates on package groups instead of individual packages.

Name

grouplist

Synopsis

grouplist

Generate a list of installed and available groups to standard output. You can use these groups as input parameters to the other group commands, with their names in quotes ("...").

Name

groupremove

Synopsis

groupremove groups

Like remove, but operates on package groups instead of individual packages.

Name

groupupdate

Synopsis

groupupdate groups

Like update, but operates on package groups instead of individual packages.

Name

info

Synopsis

info [options] [packages]

Display version information, a summary, and a description for each package, or for all packages if none is specified. See list for a description of the options.

Name

install

Synopsis

install packages

Install the latest version of a package or packages, ensuring that all dependencies are met. If no package matches the name as specified, the name is treated as a shell glob and any matches are installed.

Name

list

Synopsis

list [options] [packages]

Display a list of packages that match the packages specification and that are installed or available for installation.

Options

all

List all installed or available packages.

available

List packages on the repository that are available for installation.

extras

List packages on the system that are not available on any repository in the configuration file.

installed

List installed packages.

obsoletes

List installed packages that are made obsolete by any packages in any repository in the configuration file.

updates

List packages that have updates available for installation.

Name

localinstall

Synopsis

localinstall packages

Install the specified packages, which reside on the local system, rather than downloading them from a repository.

Name

localupdate

Synopsis

localupdate packages

Update the specified packages, which reside on the local system, rather than downloading them from a repository.

Name

makecache

Synopsis

makecache

Download and cache the metadata files from the repository. Once the cache has been built, you can use the -C option to run the commands that use the metadata (check-update, info, list, provides, and search) directly from the cache.

Name

provides

Synopsis

provides feature1 [feature2 ...]

List packages that are available or installed that provide the specified features. The features can be specified as a name or as a wildcard in file-glob syntax format, and Perl or Python regular expressions can be used.

Name

remove

Synopsis

remove package1 [package2 ...]
erase package1 [package2 ...]

Remove the specified packages from the system. Also remove any packages that depend on the specified packages.

Name

search

Synopsis

search string1 [string2 ...]

Find packages matching the specified string or strings in the description, summary, packager, or package name fields. Perl or Python regular expressions can be used for the strings. Useful for finding a package if you don't know the name.

Name

update

Synopsis

update [packages]

With no packages specified, update all installed packages. Otherwise, update the specified packages. In either case, yum makes sure that all dependencies are satisfied. If no package matches, the names specified are assumed to be shell globs and any matches are installed.

With the --obsoletes option, yum includes obsolete processing logic in its calculations.

Name

upgrade

Synopsis

upgrade [packages]

Equivalent to update --obsoletes.

Name

whatprovides

Synopsis

whatprovides feature1 [feature2 ...]

Same as provides. See provides for more information.

up2date: Red Hat Update Agent

The Red Hat Update Agent, up2date, installs and updates packages on RPM-based systems, primarily on Red Hat and Fedora Core Linux systems. Originally, up2date was intended for use with Red Hat Enterprise Linux and the Red Hat Network, but it has since been updated to work with yum and apt repositories as well. up2date operates on groupings of packages known as channels , based on the system architecture and Fedora Core or Red Hat Enterprise release. For example, a channel might be fedora-core-3, containing packages for that distribution; this type of channel is a base channel. Child channels are associated with a base channel and contain extra packages, such as for an application or a set of applications. Entries for the channels are found in /etc/sysconfig/rhn/sources. This file contains an entry for each channel that associates the repository type (e.g., up2date, yum, or apt) with a channel name and a URL in the case of a yum repository. For an apt repository, the URL is separated by spaces into parts: service:server, path, and repository name. You can also include entries for a local directory of packages, known as a dir repository.

up2date has both a command-line and a graphical interface; it is primarily the command-line interface that we describe in this section. If you are running GNOME or KDE and have the rhn-applet installed, clicking on the icon in the panel brings up the graphical up2date interface. The rhn-applet is the Red Hat Network Notification Tool, which runs in your desktop panel and notifies you when package updates are available. The panel icon is red with a blinking exclamation point if updates are available, and blue with a check mark if your system is up-to-date.

The format of the up2date command is:

up2date [options] [packages]

There are two additional commands:

up2date-nox [options] [packages]
up2date-config

Running up2date-nox is equivalent to running up2date with the --nox option; it runs without X (without the graphical interface). up2date-config runs a graphical tool for configuring up2date. You can also configure the program by editing the configuration file, /etc/sysconfig/rhn/up2date, directly. These versions of the up2date command are not described further here.

Running up2date with no packages specified brings up the graphical interface. With packages, up2date updates or installs those packages, resolving dependencies as needed. Specify packages by name; up2date determines the appropriate version, release, and distribution.

Options

--arch= arch

Install the package for the specified architecture. Not valid with -u, --list, or --dry-run.

--configure

Configure the Update Agent. Puts up a graphical window that lets you configure proxy and authentication information, retrieval options, and packages and files to skip.

--channel channels

Specify the channels to use.

-d, --download

Download the specified package, but do not install it.

--dbpath path

Specify the path to an alternate RPM database. The default path is /var/lib/rpm.

--dry-run

Go through the motions, but don't actually download and install any packages.

--exclude packages

Exclude packages in the comma-separated list packages from being installed or updated.

-f, --force

Force package installation. Overrides file, package, and configuration skip lists.

--get

Download the packages, but don't resolve any dependencies.

--get-source

Download the source package. Don't resolve any dependencies.

--gpg-flags

List the flags that will be used when GPG is invoked. Useful for scripts that want to invoke GPG the way up2date does.

-h, --help

Print a help message and exit.

-i, --install

Download and install the package. Overrides configuration option. Cannot be used with --download.

--installall

Install all available packages on the channel specified by --channel.

--justdb

Add packages to the database, but do not install them to the filesystem.

-k, --packagedirdirs

Use the colon-separated list of directories to search for packages.

-l, --list

List packages available for update. Also shows packages marked to be skipped.

--list-rollbacks

Display a list of all RPM rollbacks available. A rollback lets you return to an earlier state, from before you installed a package.

--nodownload

Do not download any packages. Used for testing.

--nosig

Do not use GPG to check package signatures. If specified, overrides configuration option.

--nosrc

Do not download source packages. If specified, overrides configuration option.

--nox

Do not display the graphical interface.

--proxy proxy

Specify an HTTP proxy to use.

--proxyUser= username

Specify the username to use with an authenticated HTTP proxy.

--proxyPassword= password

Specify a password to use with an authenticated HTTP proxy.

--register

Register or re-register the system.

--showall

Display a list of all packages available for download, including both packages that are already installed and those that are not.

--show-available

Display a list of all packages available for download and not currently installed.

--show-channels

Show the channels associated with a package. If used alone, show the currently subscribed channels.

--show-groups

Display a list of package groups that are available for download.

--show-orphans

List any installed packages that are not in any of the subscribed-to channels.

--show-package-dialog

When running in GUI mode, show the package installation dialog.

--solve-deps= dependencies

Download and install packages needed to resolve the specified dependencies. The dependencies are given in a comma-separated list.

--src

Download source, as well as binary, RPMs.

--serverUrl= url

Specify the URL of the server to use.

--tmpdir= directory

Specify a temporary storage directory for files and packages, overriding the configured value.

-u, --update

Do a complete system update, downloading and installing all relevant packages.

--undo

Undo the last package set update.

--upgrade-to-release= release-version

Upgrade to the specified release, where release-version indicates the channel for that release.

-v, --verbose

Display additional output.

--version

Print version information and exit.

--what-provides= dependencies

List packages that solve the comma-separated list of dependencies.

The Debian Package Manager

Debian GNU/Linux provides several package management tools, primarily intended to facilitate the building, installation, and management of binary packages. In addition to Debian GNU/Linux, the tools described here also work on other Debian-based systems such as Xandros, Knoppix, Ubuntu, and numerous others.

Debian package names generally end in .deb. The Debian package management tools described here include apt, aptitude, dpkg, dpkg-deb, dselect, and synaptic.

Each of these tools is described in detail in the section "Debian Package Manager Command Summary," later in this chapter.

Files

Some important files used by the Debian package management tools are described briefly here:

control

Comes with each package. Documents dependencies; contains the name and version of the package, a description, maintainer, installed size, the package priority, etc.

conffiles

Comes with each package. Contains a list of the configuration files associated with the package.

preinst, postinst, prerm, postrm

Scripts that developers can include in a package to be run before installation, after installation, before removal, or after removal of the package.

/var/lib/dpkg/available

Contains information about packages available on the system.

/var/lib/dpkg/status

Contains information about the status of packages available on the system.

/etc/apt/sources.list

A list for APT of package sources, used to locate packages. The sources are listed one per line, in order of preference.

/etc/apt/apt.conf

The main APT configuration file.

/etc/apt/apt_preferences

A preferences file that controls various aspects of APT, such as letting a user select the version or release of a package to install.

/etc/dpkg/dpkg.cfg

A configuration file containing default options for dpkg.

For a user, the important file is /etc/apt/sources.list. This file is where you set up the paths to the package archives, telling apt where to go to find packages. apt is installed with a default file. You aren't required to modify the sources in the file, but you'll probably want to change some sources, or add additional ones at some point. You might also want to change some of the options in the configuration files apt.conf, apt_preferences, and dpkg.config if you aren't satisfied with the defaults. The control, conffiles, and the pre- and post- install and removal script files are created by the package developers and used internally by the package management system.

Package Priorities

Every Debian package has a priority associated with it, indicating how important the package is to the system. The priorities are:

required

The package is essential to the proper functioning of the system.

important

The package provides important functionality that enables the system to run well.

standard

The package is included in a standard system installation.

optional

The package is one that you might want to install, but you can omit it if you are short on disk space, for example.

extra

The package either conflicts with other packages that have a higher priority, has specialized requirements, or is one that you would want to install only if you need it.

The control file for dpkg, for example, shows that dpkg itself has a priority of required, while dpkg-dev (which provides tools for building Debian packages ) has a priority of standard, and dpkg-doc is optional.

Package and Selection States

The possible states that a package can be in are:

config-files

Only the configuration files for the package are present on the system.

half-configured

The package is unpacked and configuration was started but not completed.

half-installed

Installation was started but not completed.

installed

The package is unpacked and configured.

not-installed

The package is not installed.

unpacked

The package is unpacked but not configured.

The possible package selection states are:

deinstall

The package has been selected for deinstallation (i.e., for removal of everything but the configuration files).

install

The package has been selected for installation.

purge

The package has been selected to be purged (i.e., for removal of everything including the configuration files).

Package Flags

Two possible package flags can be set for a package:

hold

The package shouldn't be handled by dpkg unless forced with the --force-hold option. Holding a package keeps it at the current version, preventing it from being updated. You might hold a package, for example, if the latest version is broken and you want to stay with the version you have until a newer one is released.

reinst-required

The package is broken and needs to be reinstalled. Such a package cannot be removed unless forced with the --force-reinstreq option.

Scripts

In addition to the commands described in the next section, a number of shell and Perl scripts are included with the package manager for use in managing and building packages:

apt-file

Search for packages, specifying an action and a pattern to search for. (Perl script)

apt-rdepends

Recursively list dependencies. (Perl script)

apt-setup

An interactive script for adding download sources to the sources.list file. (Shell script)

dpkg-architecture

Determine and set the build and host architecture for package building. (Perl script)

dpkg-checkbuilddeps

Check installed packages against the build dependencies and build conflicts listed in the control file. (Perl script)

dpkg-buildpackage

A control script to help automate package building. (Shell script)

dpkg-distaddfile

Add an entry for a file to debian/files. (Perl script)

dpkg-divert

Create and manage the list of diversions, used to override the default location for installing files. (Perl script)

dpkg-genchanges

Generate an upload control file from the information in an unpacked built source tree and the files it has generated. (Perl script)

dpkg-gencontrol

Read information from an unpacked source tree, generate a binary package control file (by default, debian/tmp/DEBIAN/control), and add an entry for the binary file to debian/files. (Perl script)

dpkg-name

Rename Debian packages to their full package names. (Shell script)

dpkg-parsechangelog

Read and parse the changelog from an unpacked source tree and write the information to standard output in machine-readable form. (Perl script)

dpkg-preconfigure

Let packages ask questions prior to installation. (Perl script)

dpkg-reconfigure

Reconfigure a package that is already installed. (Perl script)

dpkg-scanpackages

Create a Packages file from a tree of binary packages. The Packages file is used by dselect to provide a list of packages available for installation. (Perl script)

dpkg-shlibdeps

Calculate shared library dependencies for named executables. (Perl script)

dpkg-source

Pack and unpack Debian source archives. (Perl script)

dpkg-statoverride

Manage the list of stat overrides, which let dpkg override file ownership and mode when a package is installed. (Perl script)

Debian Package Manager Command Summary

For the apt- commands, options can be specified on the command line or set in the configuration file. Boolean options set in the configuration file can be overridden on the command line in a number of different ways, such as --no- opt and - opt =no, where opt is the single-character or full name of the option.

Many of these commands accept the following the common options:

-cfile, --config-file=file

Specify a configuration file to be read after the default configuration file.

-h, --help

Print usage information and exit.

-o, --option

Set a configuration option. Syntax is -o group :: tool = option.

-v, --version

Print version information and exit.

Name

apt-cache

Synopsis

apt-cache [options]command

Perform low-level operations on the APT binary cache, including the ability to perform searches and produce output reports from package metadata.

Commands

add files

Add the specified package index files to the source cache.

depends pkgs

For each specified package, show a list of dependencies and packages that can fulfill them.

dotty pkgs

Graph the relationships between the specified packages. The default is to trace out all dependent packages; turn this behavior off by setting the APT::Cache::GivenOnly configuration option.

dump

List every package in the cache. Used for debugging.

dumpavail

Print a list of available packages to standard output, suitable for use with dpkg.

gencaches

Build source and package caches from the sources in the file sources.list and from /var/lib/dpkg/status. Equivalent to running apt-get check.

madison [ pkgs ]

Display a table showing the available versions of each specified package. Similar to madison, a Debian tool that checks for package versions and reports their status. This option works locally and doesn't require access to the Debian project's internal archive.

pkgnames [ prefix ]

Print a list of packages in the system. If prefix is specified, print only packages whose names begin with that prefix. Most useful with the --generate option.

policy [ pkgs ]

Print detailed information about the priority selection of each specified package. With no arguments, print the priorities of all sources. Useful for debugging issues related to the preferences file.

rdepends [ pkgs ]

Show a list of reverse dependencies for each specified package; i.e., list any packages that depend on the specified packages.

search regex

Search package names and descriptions of all available package files for the specified regular expression and print the name and short description of each matching package. With --full, the output is identical to that from the show command. With --names-only, only the package name is searched. Multiple regular expressions can be specified. Useful for finding packages when you don't know the actual package name.

show pkgs

Display the package records for each specified package. See the -a option for more details.

showpkg pkgs

Display information about the specified packages. For each package, the output includes the available versions, packages that depend on this package, and packages that this package depends on. Useful for debugging.

showsrc pkgs

Display source package records for each specified package.

stats

Display statistics about the cache.

unmet

Display the unmet dependencies in the package cache.

Options

The common options listed earlier are also accepted.

-a, --all-versions

Print full records for all available versions. For use with the show command. The default is to show all versions; turn it off with --no-all-versions to display only the version that would be installed. The configuration option is APT::Cache::AllVersions.

--all-names

Cause pkgnames to print all names, including virtual packages and missing dependencies. The configuration option is APT::Cache::AllNames.

-f, --full

Print full package records when searching. The configuration option is APT::Cache::ShowFull.

-g, --generate

Automatically regenerate the package cache rather than using the current cache. The default is to regenerate; you can turn it off with --no-generate. The configuration option is APT::Cache::Generate.

-i, --important

Print only important dependencies (Depends and Pre-Depends relations). For use with unmet. The configuration option is APT::Cache::Important.

--installed

Only produce output for currently installed packages. For use with depends and rdepends. The configuration option is APT::Cache::Installed.

-n, --names-only

Search only on package names, not long descriptions. The configuration option is APT::Cache::NamesOnly.

-pfile, --pkg-cache=file

Use the specified file for the package cache, which is the primary cache used by all operations. The configuration option is Dir::Cache::pkgcache.

-q, --quiet

Operate quietly, producing output for logging but no progress indicators. Use -qq for even quieter operation. The configuration option is quiet.

--recurse

Run depends or rdepends recursively, so that all specified packages are printed once. The configuration option is APT::Cache::RecurseDepends.

-sfile, --src-cache=file

Specify the source cache file used by gencaches. The configuration option is Dir::Cache::srcpkgcache.

Name

apt-cdrom

Synopsis

apt-cdrom [options]command

Add a new CD-ROM to APT's list of available sources. The database of CD-ROM IDs that APT maintains is /var/lib/apt/cdroms.list.

Commands

add

Add a CD-ROM to the source list.

ident

Print the identity of the current CD-ROM and the stored filename. Used for debugging.

Options

The common options listed earlier are also accepted.

-a, --thorough

Do a thorough package scan. May be needed with some old Debian CD-ROMs.

-dmount-point, --cdrom=mount-point

Specify the CD-ROM mount point, which must be listed in /etc/fstab. The configuration option is Acquire::cdrom::mount.

-f, --fast

Do a fast copy, assuming the files are valid and don't all need checking. Specify this only if the disk has been run before without error. The configuration option is APT::CDROM::Fast.

-m, --no-mount

Don't mount or unmount the mount point. The configuration option is APT::CDROM::NoMount.

-n, --just-print, --recon, --no-act

Check everything, but don't actually make any changes. The configuration option is APT::CDROM::NoAct.

-r, --rename

Prompt for a new label and rename the disk to the new value. The configuration option is APT::CDROM::Rename.

Name

apt-config

Synopsis

apt-config [options] shell args
apt-config [options] dump

An internal program for querying configuration information.

Commands

dump

Display the contents of the configuration space.

shell

Access the configuration information from a shell script. The arguments are in pairs, specifying the name of a shell variable and a configuration value to query. The value may be postfixed with / x, where x is one of the following letters:

b

Return true or false.

d

Return directories.

f

Return filenames.

i

Return an integer.

Options

The common options listed earlier are accepted.

Name

apt-extracttemplates

Synopsis

apt-extracttemplates [options]files

Extract configuration scripts and templates from the specified Debian package files. For each specified file, a line of output is generated with the following information:

                package version template-file config-script

and the template files and configuration scripts are written to the directory specified with -t or --temp-dir or by the configuration option APT::ExtractTemplates::TempDir. The filenames are in the form package.template.xxxx and package.config.xxxx.

Options

The common options listed earlier are also accepted.

-tdir, --tempdir=dir

Write the extracted template files and configuration scripts to the specified directory. The configuration option is APT::ExtractTemplates::TempDir.

Name

apt-ftparchive

Synopsis

apt-ftparchive [options]command

Generate package and other index files used to access a distribution source. The files should be generated on the source's origin site.

Commands

clean config-file

Clean the databases used by the specified configuration file by removing obsolete records.

contents path

Search the specified directory tree recursively. For each .deb file found, read the file list, sort the files by package, and write the results to standard output. Use with --db to specify a binary caching database.

generate config-file sections

Build indexes according to the specified configuration file.

packages path [ override [ pathprefix ]]

Generate a package file from the specified directory tree. The optional override file contains information describing how the package fits into the distribution, and the optional path prefix is a string prepended to the filename fields. Similar to dpkg-scanpackages. Use with --db to specify a binary caching database.

release path

Generate a release file from the specified directory tree.

sources paths [ override [ pathprefix ]]

Generate a source index file from the specified directory tree. The optional override file contains information used to set priorities in the index file and to modify maintainer information. The optional path prefix is a string prepended to the directory field in the generated source index. Use --source-override to specify a different source override file. Similar to dpkg-scansources.

Options

The common options listed earlier are also accepted.

--contents

Perform contents generation. If set, and package indexes are being generated with a cache database, the file listing is extracted and stored in the database. If used with generate, allows the creation of any contents files. The default is on. The configuration option is APT::FTPArchive::Contents.

-d, --db

Use a binary caching database. This option has no effect on generate. The configuration option is APT::FTPArchive::DB.

--delink

Enable delinking of files when used with the External-Links setting. The default is on; turn off with --no-delink. The configuration option is APT::FTPArchive::DeLinkAct.

--md5

Generate MD5 checksums for the index files. The default is on. The configuration option is APT::FTPArchive::MD5.

-q, --quiet

Run quietly, producing logging information but no progress indicators. Use -qq for quieter operation. The configuration option is quiet.

--read-only

Make the caching databases read-only. The configuration option is APT::FTPArchive::ReadOnlyDB.

-sfile, --source-override=file

Specify a source override file. For use with the sources command. See sources description for more information. The configuration option is APT::FTPArchive::SourceOverride.

Name

apt-get

Synopsis

apt-get [options] command [package ...]

A command-line tool for handling packages. Also serves as a backend to other APT tools such as dselect, synaptic, and aptitude (all described later in this section). As described earlier in this chapter, the following command can be run every day to keep your system updated:

apt-get update && apt-get -u dist-upgrade

Commands

autoclean

Like clean, but remove only package files that can no longer be downloaded. Set the configuration option APT::Clean-Installed to off to prevent installed packages from being erased.

build-dep

Install or remove packages to satisfy the build dependencies for a source package.

clean

Clear the local repository of retrieved package files. Useful for freeing up disk space.

check

Update the package cache and check for broken packages.

dist-upgrade

Like upgrade, but also handle dependencies intelligently. See the -f option for more information.

dselect-upgrade

Used with dselect. Track the changes made by dselect to the Status field of available packages and take actions necessary to realize that status.

install packages

Install one or more packages. Specify the package name, not the full filename. Other required packages are also retrieved and installed. With a hyphen appended to the package name, the package is removed if it is already installed. Select a version to install by appending an equals sign and the version.

remove packages

Remove one or more packages. Specify the package name, not the full filename. With a plus sign appended to the name, the package is installed.

source packages

Find source packages and download them into the current directory. If specified with --compile, the source packages are compiled into binary packages. With --download-only, the source packages are not unpacked. Select a specific version by appending an equals sign and the version.

update

Resynchronize the package overview files from their sources. Must be done before an upgrade or dist-upgrade.

upgrade

Install the latest versions of all packages currently installed. Remember to run update first.

Options

The common options listed earlier are also accepted.

--arch-only

Process only architecture-dependent build dependencies. Configuration option is APT::Get::Arch-Only.

-b, --build, --compile

Compile source packages after download. The configuration option is APT::Get::Compile.

-d, --download-only

Retrieve package files, but don't unpack or install them. The configuration option is APT::Get::Download-only.

--diff-only

Download only the diff file from a source archive. The configuration option is APT::Get::Diff-Only.

-f, --fix-broken

Try to fix a system with broken dependencies. Can be used alone or with a command. Run with the install command if you have problems installing packages. You can run the sequence:

apt-get -f install
apt-get dist-upgrade

several times to clean up interlocking dependency problems. The configuration option is APT::Get::Fix-Broken.

--force-yes

Force yes. Causes APT to continue without prompting if it is doing something that could damage your system. Use with great caution and only if absolutely necessary. The configuration option is APT::Get::force-yes.

--ignore-hold

Ignore a hold placed on a package, which normally prevents the package from being upgraded. Use with dist-upgrade to override many undesired holds. The configuration option is APT::Get::Ignore-Hold.

--list-cleanup

Erase obsolete files from /var/lib/apt/lists. The default is on; use --no-list-cleanup to turn it off, which you would normally do only if you frequently modify your list of sources. The configuration option is APT::Get::List-Cleanup.

-m, --ignore-missing, --fix-missing

Ignore missing or corrupted packages or packages that cannot be retrieved. Can cause problems when used with -f. The configuration option is APT::Get::Fix-Missing.

--no-download

Disable package downloading; use with --ignore-missing to force APT to use only the packages that have already been downloaded. The configuration option is APT::Get::Download.

--no-remove

Do not remove any packages; instead, abort without prompting. The configuration option is APT::Get::Remove.

--no-upgrade

Do not upgrade packages. Use with install to prevent upgrade of packages that are already installed. The configuration option is APT::Get::Upgrade.

--only-source

Do not map the names specified with the source or build-dep commands through the binary table. With this option, only source package names can be specified. The configuration option is APT::Get::Only-Source.

--print-uris

Print Uniform Resource Indicators (URIs) of files instead of fetching them. Print path, destination filename, size, and expected MD5 checksum. The configuration option is APT::Get::Print-URIs.

--purge

Tell dpkg to do a purge instead of a remove for items that would be removed. Purging removes packages completely, including any configuration files. The configuration option is APT::Get::Purge.

-q, --quiet

Quiet mode. Omit progress indicators and produce only logging output. Use -qq to make even quieter. The configuration option is quiet.

--reinstall

Reinstall packages that are already installed, upgrading them to the latest version. The configuration option is APT::Get::ReInstall.

-s, --simulate, --just-print, --dry-run, --recon, --no-act

Go through the motions, but don't actually make any changes to the system. The configuration option is APT::Get::Simulate.

-trel, --target-release=rel, --default-release=rel

Retrieve packages only from the specified release. The value of rel can be a release number or a value such as unstable. The configuration option is APT::Default-Release.

--tar-only

Download only the tar file from a source archive. The configuration option is APT::Get::Tar-Only.

--trivial-only

Perform only operations that are considered trivial; i.e., ones that won't harm your system, by, say, removing needed files. Unlike --assume-yes, which always answers "yes" to any prompts, --trivial-only always answers "no." The configuration option is APT::Get::Trivial-Only.

-u, --show-upgraded

Print a list of all packages to be upgraded. The configuration option is APT::Get::Show-Upgraded.

-V, --verbose-versions

Show full versions for upgraded and installed packages. The configuration option is APT::Get::Show-Versions.

-y, --yes, --assume-yes

Automatically reply "yes" to prompts and run noninteractively. Abort if there is an error. The configuration option is APT::Get::Assume-Yes.

Name

apt-sortpkgs

Synopsis

apt-sortpkgs [options]indexfiles

Sort the records in a source or package index file by package name and write the results to standard output. apt-sortpkgs also sorts the internal fields of each record.

Options

The common options listed earlier are also accepted.

-s, --source

Order by source index field. The configuration option is APT::SortPkgs::Source.

Name

aptitude

Synopsis

aptitude [options] [action [arguments]]

A text-based frontend to apt, which can be run either directly from the command line or from a visual mode that runs in a terminal window.

Actions

The following actions are supported. Running aptitude with no action invokes the visual mode. Package names can be entered individually or as search patterns. A search pattern consists of terms starting with a tilde (~), followed by a character indicating the type of term, followed by the text to be searched for. The most common usage is to use ~n to search for a package name (e.g., ~nemacs, to search for packages that have emacs in their name). You can find the full list of term types in the Aptitude User's Manual. The manual can be found in /usr/share/doc/README on a Debian system. On an RPM-based system with aptitude installed, the README file may be in /usr/share/aptitude or /usr/share/doc/aptitude.

autoclean

Clean out the cache by removing only packages that can no longer be downloaded.

clean

Clean out the cache by removing all previously downloaded .deb files.

dist-upgrade

Upgrade as many installed packages as possible, installing and removing packages as needed to satisfy dependencies.

download packages

Download the .deb file for each specified package to the current directory.

forbid-versionpackage[=version] ...

Don't allow aptitude to upgrade the package to a particular version. If no version is specified, it is assumed to be the version that would normally be used.

forget-new

Remove internal information about what packages are "new."

help

Display help information and exit.

hold packages

Place a hold on each specified package.

install [package[=version] ...]

Install the specified packages. With a version, install that version. With no arguments, install any stored or pending actions. You can also use install to perform different actions on multiple packages with a single command. Append - to the package name to remove, + to install, _ to purge, or = to hold a package.

markauto packages

Mark the specified packages as automatically installed.

purge [package[=version] ...]

Remove the specified packages and their configuration files.

remove [package[=version] ...]

Remove the specified packages.

search patterns

Search for packages matching each of the specified patterns and display a list of matches. The full list of search terms can be found in the Aptitude User's Manual.

show patterns

Search for packages matching each of the specified patterns and display detailed information for every match it finds.

unhold packages

Remove the hold on each specified package.

unmarkauto packages

Mark the specified packages as manually installed.

update

Update the list of available packages by downloading the names of new and upgradeable packages.

upgrade

Upgrade as many packages as possible; if a package has dependency problems, avoid upgrading that package (but don't remove it).

Options

Most of the aptitude options have corresponding configuration options that can be set in the configuration file.

-d, --download-only

Download packages to the cache but do not install them. Configuration option is Aptitude::CmdLine::Download-Only.

-D, --show-deps

Show summaries of why packages will be automatically installed or removed. Aptitude::CmdLine::Show-Deps is the configuration option.

-f

Attempt to fix dependencies of broken packages. Configuration option is Aptitude::CmdLine::Fix-Broken.

-Fformat, --display-formatformat

Specify the output format for search. See the Aptitude User's Manual for details on specifying the format. Configuration option is Aptitude::CmdLine::Package-Display-Format.

-h, --help

Print help message and exit.

-Oorder, --sortorder

Specify the sort order for search output. See the Aptitude User's Manual for details.

-P, --prompt

Always display a prompt, even for actions that were explicitly requested. Configuration option is Aptitude::CmdLine::Always-Prompt.

-r, --with-recommends

Treat recommendations as dependencies when installing new packages. Aptitude::CmdLine::Recommends-Important is the configuration option.

-R, --without-recommends

Do not treat recommendations as dependencies when installing new packages. The configuration option is Aptitude::CmdLine::Recommends-Important.

-s, --simulate

Go through the motions, but do not actually perform the actions. Print the actions that would be performed. The configuration option is Aptitude::CmdLine::Simulate.

-trelease, --target-releaserelease

Specify the release to use for installing packages. The configuration option is Aptitude::CmdLine::Default-Release.

-v, --verbose

Operate verbosely, displaying additional information. Specify multiple times to get even more information displayed. Configuration option is Aptitude::CmdLine::Verbose.

-V, --show-versions

Display the version for packages being installed. The configuration option is Aptitude::CmdLine::Show-Versions.

--version

Display the version information for aptitude and exit.

--visual-preview

Start the visual interface and display the preview screen.

-wwidth, --widthwidth

Specify the output display width for search. The default is the terminal width. Aptitude::CmdLine::Package-Display-Width is the configuration option.

-y, --assume-yes

Assume a "yes" response to a yes/no prompt and don't display the prompt. Prompts for dangerous actions are still shown. This option overrides -P. The configuration option is Aptitude::CmdLine::Assume-Yes.

-Z

Display the disk space that will be used or freed by the packages being acted upon. The configuration option is Aptitude::CmdLine::Show-Size-Changes.

Internal options

The following options are used internally for aptitude's visual mode. You shouldn't need to issue them directly.

-i

Display a download preview when the program starts. Cannot be used with -u.

-S filename

Load extended state information from the specified file, not the default state file.

-u

Begin updating the package lists as soon as the program starts. Cannot be used with -i.

Name

dpkg

Synopsis

dpkg [options]action

A tool for installing, managing, and building packages. Also serves as a frontend to dpkg-deb and dpkg-query.

dpkg actions

These actions are carried out by dpkg itself:

-Apkgfile, --record-availpkgfile

Update the record of available files kept in /var/lib/dpkg/available with information from pkgfile. This information is used by dpkg and dselect to determine what packages are available. With -R or --recursive, pkgfile must be a directory.

-C, --audit

Search for partially installed packages and suggest how to get them working.

--clear-avail

Remove existing information about what packages are available.

--command-fd n

Accept commands passed on the file descriptor given by n. Note that any additional options set through this file descriptor or on the command line are not reset, but remain for other commands issued during the same session.

--compare-versions ver1 op ver2

Perform a binary comparison of two version numbers. The operators lt, le, eq, ne, ge, and gt treat a missing version as earlier. The operators lt-nl, le-nl, ge-nl, and gt-nl treat a missing version as later (where nl is "not later"). A third set of operators (< << <= = >= >> >) is provided for compatibility with control-file syntax. dpkg returns zero for success (i.e., the condition is satisfied) and nonzero otherwise.

--configure[packages|-a|--pending]

Reconfigure one or more unpacked packages. If -a or --pending is given instead of packages, configure all packages that are unpacked but not configured. Configuring a package involves unpacking the configuration files, backing up the old configuration files, and running the postinst script if one is present.

-Dh, --debug=help

Print debugging help message and exit.

--force-help

Print help message about the --force- list options and exit. See the --force- list option description later in this entry for the possible values of list.

--forget-old-unavail

Forget about uninstalled, unavailable packages.

--get-selections [ pattern ]

Get list of package selections and write to standard output. With pattern specified, write selections that match the pattern.

--help

Print help message and exit.

-ipkgfile, --installpkgfile

Install the package specified as pkgfile. With -R or --recursive, pkgfile must be a directory.

--license, --licence

Print dpkg license information and exit.

--merge-avail pkgs-file

Update the record of available files kept in /var/lib/dpkg/available. This information is used by dpkg and dselect to determine what packages are available. Merging combines the information from pkgs-file (distributed as Packages) with the existing information.

--print-architecture

Print the target architecture.

--print-gnu-build-architecture

Print the GNU version of the target architecture.

--print-installation-architecture

Print the host architecture for installation.

--purge[packages|-a|--pending]

-r, --remove [ packages|-a|--pending]

Purge or remove one or more installed packages. Removal gets rid of everything except the configuration files listed in debian/conffiles; purging also removes the configuration files. If -a or --pending is given instead of packages, dpkg removes or purges all packages that are unpacked and marked (in /var/lib/dpkg/status) for removing or purging.

--set-selections

Set package selections based on input file read from standard input.

--unpack pkgfile

Unpack the package, but do not configure it. With -R or --recursive, pkgfile must be a directory.

--update-avail pkgs-file

Like --merge-avail, but replaces the information with the contents of the pkgs-file.

--version

Print dpkg version information and exit.

--yet-to-unpack

Search for uninstalled packages that have been selected for installation.

dpkg-deb actions

The following actions can be specified for dpkg and are passed to dpkg-deb for execution. Also see dpkg-deb.

-bdir[archive], --builddir[archive]

Build a package.

-carchive, --contentsarchive

List the contents of a package.

-earchive[dir], --controlarchive[dir]

Extract control information from a package.

-farchive[control-fields], --fieldarchive[control-fields]

Display the control field or fields of a package.

-Iarchive[control-files], --infoarchive[control-files]

Show information about a package.

--fsys-tarfile archive

Write the filesystem tree contained in archive to standard output in tar format.

-xarchive dir, --extractarchive dir

Extract the files from a package.

-Xarchive dir, --vextractarchive dir

Extract the files and display the filenames from a package.

dpkg-query actions

The following actions can be specified for dpkg and are passed to dpkg-query for execution. Also see dpkg-query.

-l, --list[pkg-name-pattern]

List all packages whose names match the specified pattern. With no pattern, list all packages in /var/lib/dpkg/available. The pattern can include standard shell wildcard characters and may have to be quoted to prevent the shell from doing filename expansion.

-Lpackages, --listfilespackages

List installed files that came from the specified package or packages.

-p, --print-availpackage

Print the details about package from /var/lib/dpkg/available.

-spackages, --statuspackages

Report the status of one or more packages by displaying the entry in the status database /var/lib/dpkg/status.

-Sfilename-pattern, --searchfilename-pattern

Search installed packages for a filename. The pattern can include standard shell wildcard characters and may have to be quoted to prevent the shell from doing filename expansion.

Options

dpkg options can be specified on the command line or set in the configuration file. Each line in the configuration file contains a single option, specified without the leading dash (-).

--abort-after= num

Abort processing after num errors. Default is 50.

--admindir=adir, --instdir=idir, --root=rdir

Change default directories. adir contains administrative files with status and other information about packages; it defaults to /var/lib/dpkg. idir is the directory into which packages are installed; it defaults to /. Changing the root directory to rdir automatically changes idir to rdir and adir to / rdir /var/lib/dpkg.

-B, --auto-deconfigure

When a package is removed, automatically deconfigure any other package that depended on it.

-Doctal, --debug=octal

Turn on debugging, with the octal value specifying the desired level of debugging information. Use -Dh or --debug=help to display the possible values. You can OR the values to get the desired output.

-E, --skip-same-version

Don't install the package if this version is already installed.

--force-list, --no-force-list, --refuse-list

Force or refuse to force an operation. list is specified as a comma-separated list of options. With --force, a warning is printed, but processing continues. --refuse and --no-force cause processing to stop with an error. Use --force-help to display a message describing the options. The force/refuse options are:

all

Turn all force options on or off.

architecture

Process even if intended for a different architecture.

auto-select

Select or deselect packages to install or remove them. Forced by default.

bad-path

Some programs are missing from the path.

bad-verify

Install package even if it fails to verify.

confdef

Always choose the default action for modified configuration files. If there is no default and confnew or confold is also specified, use that to decide; otherwise, ask the user.

configure-any

Configure any unconfigured package that the package depends on.

conflicts

Permit installation of conflicting packages. Can result in problems from files being overwritten.

confmiss

Always install a missing configuration file. Be careful using this option, since it means overriding the removal of the file.

confnew

Always install the new version of a modified configuration file unless confdef is also specified. In that case, use the default action if there is one.

confold

Keep the old version of a modified configuration file unless confdef is also specified. In that case, use the default action if there is one.

depends

Turn dependency problems into warnings.

depends-version

Warn of version problems when checking dependencies, but otherwise ignore.

downgrade

Install even if a newer version is already installed. Forced by default.

hold

Process packages even if they are marked to be held.

not-root

Try to install or remove even when not logged on as root.

overwrite

Overwrite a file from one package with the same file from another package.

overwrite-dir

Overwrite one package's directory with a file from another package.

overwrite-diverted

Overwrite a diverted file with an undiverted version.

remove-essential

Remove a package even if it is essential. Note that this can cause your system to stop working.

remove-reinstreq

Remove a package even if it is broken and is marked to require reinstallation.

-G

Don't install a package if a newer version is already installed. Same as --refuse-downgrade.

--ignore-depends= pkglist

Dependency problems result only in a warning for the packages in pkglist.

--new

New binary package format. This is a dpkg-deb option.

--no-act, --dry-run, --simulate

Go through the motions, but don't actually write any changes. Used for testing. Be sure to specify before the action; otherwise, changes might be written.

--nocheck

Ignore the contents of the control file when building a package. This is a dpkg-deb option.

-O, --selected-only

Process only packages that are marked as selected for installation.

--old

Old binary package format. This is a dpkg-deb option.

-R, --recursive

Recursively handle .deb files found in the directories and their subdirectories specified with -A, -i, --install, --unpack, and --avail.

--status-fd n

Send the package status information to the specified file descriptor. Can be given more than once.

Name

dpkg-deb

Synopsis

dpkg-deb action [options]

Backend command for building and managing Debian package archives. Also see dpkg; you'll often want to use dpkg to pass commands through to dpkg-deb, rather than call dpkg-deb directly.

Actions

-bdir[archive], --builddir[archive]

Create an archive from the filesystem tree starting with directory dir. The directory must have a DEBIAN subdirectory containing the control file and any other control information. If archive is specified and is a filename, the package is written to that file; if no archive is specified, the package is written to dir .deb. If the archive already exists, it is replaced. If archive is the name of a directory, dpkg-deb looks in the control file for the information it needs to generate the package name. (Note that for this reason, you cannot use --nocheck with a directory name.)

-carchive, --contentsarchive

List the filesystem-tree portion of archive.

-earchive[dir], --controlarchive[dir]

Extract control information from archive into the directory dir, which is created if it doesn't exist. If dir is omitted, a DEBIAN subdirectory in the current directory is used.

-farchive[control-fields], --fieldarchive[control-fields]

Extract information about one or more fields in the control file for archive. If no fields are provided, print the entire control file.

-h, --help

Print help information and exit.

-Iarchive[control-files], --infoarchive[control-files]

Write information about binary package archive to standard output. If no control files are provided, print a summary of the package contents; otherwise, print the control files in the order they were specified. An error message is printed to standard error for any missing components.

--fsys-tarfile archive

Extract the filesystem tree from archive, and send it to standard output in tar format. Can be used with tar to extract individual files from an archive.

--license, --licence

Print the license information and exit.

--version

Print the version number and exit.

-Warchive, --showarchivearchive

Show information about the specified archive. The output can be customized with the --showformat option.

-xarchive dir, --extractarchive dir-Xarchive dir, --vextractarchive dir

Extract the filesystem tree from archive into the specified directory, creating dir if it doesn't already exist. -x (--extract) works silently, while -X (--vextract) lists the files as it extracts them. Do not use this action to install packages; use dpkg instead.

Options

-D, --debug

Turn on debugging.

--new

Build a new-style archive format (this is the default).

--nocheck

Don't check the control file before building an archive. This lets you build a broken archive.

--old

Build an old-style archive format.

--showformat= format

Specify the output format for -W/--show. The format can include the standard escape sequences \n (newline), \r (carriage return), or \\ (backslash). Specify package fields with the syntax ${ var [; width ]}. Fields are right-aligned by default, or left-aligned if width is negative.

-z #

Set the compression level to the value specified by #.

-Z type

Set the type of compression to use when building an archive. Possible values are: gzip, bzip2, and none.

Name

dpkg-query

Synopsis

dpkg-query [option]command

Display information about packages listed in the dpkg database. You can also use dpkg-query as a backend for dpkg, instead of calling dpkg-query directly.

Commands

--help

Print help information and exit.

-l[patterns], --list[patterns]

List packages whose names match any of the specified patterns. With no pattern specified, list all packages in /var/lib/dpkg/available. The pattern may need to be in quotes to avoid expansion by the shell.

-Lpackages, --listfilespackages

List files installed on your system from each of the specified packages. This command does not list files created by package-specific installation scripts.

--license, --licence

Print the license information and exit.

-ppackage, --print-availpackage

Display details for the specified package, as found in /var/lib/dpkg/available.

-spackage, --statuspackage

Report on the status of the specified package.

-Spatterns, --searchpatterns

Search the installed packages for filenames matching one of the specified patterns. At least one pattern must be specified.

-W[patterns], --show[patterns]

Similar to -l; however, the output can be customized with the --showformat option.

--version

Print version information and exit.

Options

--admindir= dir

Use dir as the location of the dpkg database. The default is /var/lib/dpkg.

--showformat= format

Specify the output format for -W/--show. The format can include the standard escape sequences \n (newline), \r (carriage return), or \\ (backslash). Specify package fields with the syntax ${ var [; width ]}. Fields are right-aligned by default, or left-aligned if width is negative.

Name

dpkg-split

Synopsis

dpkg-split [action] [options]

Split a binary package into smaller pieces and reassemble the pieces, either manually or in automatic mode. The automatic mode maintains a queue of parts for reassembling. Useful for transferring to and from floppy disks on older systems.

Actions

-a -ooutput part, --auto -ooutput part

Add part to the queue for automatic reassembly, and if all the parts are available, reassemble the package as output. Requires the use of the -o (or --output) option, as shown.

-d[packages], --discard[packages]

Discard parts from the automatic-assembly queue. If any packages are specified, discard only parts from those packages. Otherwise, empty the queue.

-Iparts, --infoparts

Print information about the part file or files specified to standard output.

-jparts, --joinparts

Join the parts of a package file together from the parts specified. The default output file is package-version .deb.

-l, --listq

List the contents of the queue of parts waiting for reassembly, giving the package name, the parts that are on the queue, and the number of bytes.

-sfull-package[prefix], --splitfull-package[prefix]

Split the package full-package into parts, named prefixN of M .deb. The prefix defaults to the full-package name without the .deb extension.

-h, --help

Print help message and exit.

--license, --licence

Print license information and exit.

--version

Print version information and exit.

Options

--depotdir dir

Specify an alternate directory dir for the queue of parts waiting for reassembly. Default is /var/lib/dpkg.

--msdos

Force --split output filenames to be MS-DOS-compatible.

-ooutput, --outputoutput

Use output as the filename for a reassembled package.

-Q, --npquiet

Do not print an error message for a part that doesn't belong to a binary package when doing automatic queuing or reassembly.

-Snum, --partsizenum

When splitting, specify the maximum part size (num) in kilobytes. Default is 450 KB.

Name

dselect

Synopsis

dselect [options] [action]

A screen-oriented user frontend to dpkg. One of the primary user interfaces for installing and managing packages. See dpkg and dpkg-deb for information on building packages.

Actions

If dselect is run with no action specified on the command line, it displays the following menu:

 * 0. [A]ccess   Choose the access method to use.
   1. [U]pdate   Update list of available packages, if
                 possible.
   2. [S]elect   Request which packages you want on your
                 system.
   3. [I]nstall  Install and upgrade wanted packages.
   4. [C]onfig   Configure any packages that are
                 unconfigured.
   5. [R]emove   Remove unwanted software.
   6. [Q]uit     Quit dselect.

The asterisk (on the first line) shows the currently selected option. Any of the menu items can be specified directly on the command line as an action (access, update, select, install, config, remove, quit) to go directly to the desired activity. For example:

dselect access

If you enter quit on the command line, dselect exits immediately without doing anything. An additional command-line action is menu, which displays the menu and is equivalent to running dselect with no action.

Options

Options can be specified both on the command line and in the dselect configuration file, /etc/dpkg/dselect.cfg.

--admindir dir

Change the directory that holds internal data files to dir. Default is /var/lib/dpkg.

--colorcolorspec, --colourcolorspec

Set colors for different parts of the screen, as specified by colorspec as follows:

screenpart:[fgcolor],[bgcolor][:attr[+attr+ ...]]

This option can be specified multiple times, to override the default colors for different screen parts. Rather than having to specify the colors on the command line each time you run dselect, you might prefer to set them in the configuration file. The possible screen parts (going from the top of the screen to the bottom) are:

title

The screen title.

listhead

The header line above the package list.

list

The scrolling list of packages and some help text.

listsel

The selected item in the list.

pkgstate

The text showing the current state of each package.

pkgstatesel

The text showing the current state of the selected package.

infohead

The header line showing the state of the selected package.

infodesc

The short description of the package.

info

The text that displays information such as the package description.

infofoot

The last line of the screen when selecting packages.

query

Query lines.

helpscreen

The color of help screens.

Either the foreground color, the background color, or both can be specified for each screen part. The colors are given as the standard curses colors. After the color specification, you can specify a list of attributes separated by plus signs (+). The possible attributes are normal, standout, underline, reverse, blink, bright, dim, and bold. Not all attributes work on all terminals.

--expert

Run in expert mode; don't print help messages.

-D[file], --debug[file]

Turn on debugging. Send output to file if specified.

--help

Print help message and exit.

--license, licence

Print license information and exit.

--version

Print version information and exit.

Name

synaptic

Synopsis

synaptic [options]

Graphical frontend for APT. Use in place of apt-get to install, upgrade, or remove packages from your system. With synaptic, you can view a list of all available packages, or you can break the list down in various ways to make it more manageable. From the synaptic window, you can select from a list of categories. The categories are section (e.g., view only development-related packages), package status, alphabetic (e.g., view only packages whose name starts with the letter A), search history, or filter.

If you choose to display by filter, there are a set of predefined filters, or you can define your own. The predefined filters include ones to display all packages, packages marked for a status change, packages that can be configured with debconf (Debian systems only), packages with broken dependencies, and packages that can be upgraded to a later version. You can edit the existing filters or define your own, by selecting Preferences → Filters from the Edit menu.

Once you've used the selection criteria to find the list of packages, you can select a single package, or you can select multiple packages by holding down the SHIFT or CTRL key. Like apt-get, first do an update to update the package lists, then you can do an install or upgrade.

To start synaptic from Gnome, select System tools → Synaptic Package Manager from the Application menu. From the KDE menu, select Settings → Extra → Synaptic Package Manager. You can also start the graphical interface from the command line, with the command:

synaptic [options]

Options

In addition to the following options, synaptic accepts the standard GTK+ toolkit command-line options.

-ffilename, --filter-file=filename

Use the specified file as an alternative filter settings file.

-h, --help

Print help message and exit.

-inum, --initial-filter=num

Start up with the filter numbered num as the initial filter.

--non-interactive

Run without prompting for user input.

-ooption, --option=option

Set an internal option. Don't use this option unless you are sure you know what you are doing.

-r

Open with the file repository window displayed. This window lists the repositories and shows which are active.

Mac OS X Package Management

There are two freely available package management systems for Mac OS X.

Fink and Fink Commander

The Fink project 's goal is to port important Open Source and Free Software to Darwin and Mac OS X. To that end, the project provides the Fink package management system, which makes it easy to install, upgrade, and uninstall Open Source software.

Fink is based on the Debian tools dpkg, dselect, and apt-get (described earlier in this chapter). It uses these tools to manage downloading, building, and installation of available packages. The current default location for installation is the /sw directory; this name does not conflict with any of the other standard Unix or Mac OS X installation directories, which keeps package management simple.

The Fink project is based at http://fink.sourceforge.net. From there you can download the fink command-line program and other tools and start downloading the packages that are available.

Fink Commander provides an Aqua-based GUI interface to Fink. The web starting point is http://finkcommander.sourceforge.net. A binary version of Fink Commander is included when you download Fink, so you don't have to build Fink Commander yourself.

For more information, including screenshots of Fink Commander, see the two web sites just cited.

The GNU Mac OS X Public Archive

The GNU Mac OS X Public Archive (OSXGNU) at http://www.osxgnu.org provides an alternative to Fink. It provides a package management system that extends the rudimentary facilities already available in Mac OS X (i.e., the standard Mac OS X installer facilities).

The advantage to the OSXGNU project is that you don't have to use a terminal to install packages; you just launch them. The OSXGNU project provides the OS X Package Manager , which is an Aqua-based GUI interface to the Mac OS X package management system. It lets you manage all the packages installed on your system, not just those downloaded from the OSXGNU site.

A disadvantage to the OSXGNU system is that it doesn't track different versions of packages or automatically download new software for you. You have to do that yourself manually, whereas Fink's Debian-based tools are considerably more Internet-aware.

Building from Source

Of course, you can always build software from source code as well. Open a Terminal window and download whatever package you wish to build using a program such as curl or ftp. Be sure you have the development tools installed, and then follow the standard recipe as presented in Chapter 1.

Solaris Package Management

Solaris uses an enhanced version of the System V Release 4 package management system. These tools are used for installation of Sun's software and for software available from http://www.sunfreeware.com. The tools are different from those of GNU/Linux, since they do not manage automatic updating of installed packages. (pkgadd can, however, download and install packages provided with http:// URLs.)

If you need to create Solaris packages, you should read Sun's Application Packaging Developer's Guide. The Solaris 9 version of this document is currently available at http://docs.sun.com/app/docs/doc/806-7008/.

Solaris Package Management Command Summary

Adding and removing packages are straightforward operations: use the pkgadd and pkgrm commands. The pkginfo command provides information about installed packages. The pkgadm command provides rudimentary control over installed packages.

Creating packages is more involved, requiring the use of pkgproto to build a prototype(4) file and then pkgmk to actually create the package.

The installf and removef commands are useful when writing scripts to be run by pkgadd and pkgrm.

Name

installf

Synopsis

/usr/sbin/installf [options] pkginst pathname                   [ftype [major minor] [mode owner group]]
/usr/sbin/installf [options] pkginst -
/usr/sbin/installf -f [options]pkginst

installf adds a file to the system installation database that isn't listed in the pkgmap file. It's used for files created dynamically (such as device files in /dev) during package installation. All invocations supply the package name and instance, pkginst, associated with the new file. This command should be run before any files are changed.

The first synatx supplies the file type, its major and minor device numbers if the file is a device file, and the protection mode, owner, and group on the command line.

The second syntax is similar to the first, but reads the information from standard input, one file's information per line. The third syntax is used after the files are all in place: it finalizes the information in the installation database.

Options

-c class

The class with which the objects should be associated. The default is none.

-f

Indicate that installation is complete (final).

-M

Do not use $root_path/etc/vfstab for determining a client's mount points. Rather, assume that the mount points are correct on the server.

-R root-path

Install all files under root-path. This is used on server systems when installing packages for clients.

-V vfstab-file

Use vfstab-file instead of $root_path/etc/vfstab when installing files. This is primarily useful on a server installing software for a client, where the client's /etc/vfstab file is not available or is incorrect.

ftype

The ftype value is a single character indicating the type of the file. The allowed values are:

b

A block-special device file.

c

A character-special device file.

d

A directory.

e

A file that will be edited on installation or removal.

f

A regular file (executable or data).

l

A linked file.

p

A named-pipe or FIFO.

s

A symbolic link.

v

A volatile file; one whose contents are expected to change over time.

x

An exclusive directory.

Name

pkgadd

Synopsis

/usr/sbin/pkgadd [options] [source-loc] [pkg-name]
/usr/sbin/pkgadd -s [source-loc] [pkg-name]

Install a package. By default, pkgadd looks in /var/spool/pkg for installable package files; this can be changed with the -d option. The -s option may be used to write a package from installation media to the spool directory instead of installing it.

Options

-a adminfile

Use adminfile as the installation administration file, instead of the system default file (/var/sadm/install/admin/default). This file specifies policies for installation in terms of user interaction, how many instances of a package may be installed, and so on.

-d device

Use device as the source for the package to be installed or copied.

-G

Install the package only in the current zone. If installed in the global zone, the package is not propagated to any nonglobal zones.

-k keystore

Use keystore as the source for trusted certificate authority certificates.

-M

Do not use $root_path/etc/vfstab for determining a client's mount points. Rather, assume that the mount points are correct on the server.

-n

Do a noninteractive installation. This suppresses the output list of installed files.

-P password

Use password to decrypt the keystore provided with -k.

-r response-file

The full pathname response-file provides the output of pkgask. Use the contents to provide the responses to questions that pkgadd would otherwise ask interactively. See pkgask.

-R root-path

Install all files under root-path. This is used on server systems when installing packages for clients.

-s spooldir

Write the package to spooldir instead of installing it.

-v

Verbose: trace execution of all scripts run by pkgadd.

-V vfstab-file

Use vfstab-file instead of $root_path/etc/vfstab when installing packages. This is primarily useful on a server installing software for a client, where the client's /etc/vfstab file is not available or is incorrect.

-x host : port

Use an HTTP or HTTPS proxy on host host at port number port.

Sources

The sources parameter is either the name of a package, in which case pkgadd searches for the package in /var/spool/pkg, or a device (such as a floppy disk or CD-ROM) specified with the -d option.

Instances

The instances parameter specifies which instances of the named packages should be installed, as follows:

all

Install all packages on the given source media.

pkg-name, pkg-name.*

Install just the named package. With the suffix .*, all instances of the named package are installed.

-Ycategory[,category ...]

Install packages whose CATEGORY parameter in the package's pkginfo file matches one of the given categories.

Name

pkgadm

Synopsis

pkgadm addcert [options] certfile
pkgadm removecert -n name [options]
pkgadm listcert -n name [options]
pkgadm dbstatus [-R rootpath]
pkgadm -V | -?

The pkgadm command manages the Solaris packaging system. The first argument is a command indicating what it should do, with options controlling the behavior. The certfile is a file containing the certificate and optionally, the private key for adding to the database.

Commands

addcert

Import a certificate into the database. Optionally, specify the trust of the certificate.

dbstatus

Print the type of internal database used for managing packages. The current version always prints text, but this could change in future Solaris releases.

listcert

Print the details of one or more certificates in the keystore.

removecert

Remove either a certificate/private key pair, or a trusted certificate authority certificate from the keystore. Once removed, they cannot be used.

Options

-a application

Use the keystore for application instead of the global keystore.

-e keyfile

Obtain the private key for a non-trusted certificate/key combination from keyfile instead of from the file containing the certificate.

-f format

Use format for reading or printing keys. Allowed values for input and output are pem for PEM encoding and der for DER encoding. Output also allows text format for human-readable output.

-k keystore

Use keystore as the keystore instead of the system default keystore.

-n name

Specify the name of the entity in the keystore on which the operation is being performed (key removed, deleted, etc.). When printing, if this option isn't supplied, all keystore entities are printed.

-o file

Send output to file instead of to standard output. Used when printing certificates.

-p method

Use the password retrieval method method for decrypting the certificate or private key. The method is one of those listed in pkgadd(1); the default is console.

-P method

Like -p but for decrypting the keystore.

-R rootpath

Use rootpath /var/sadm/security to store keys and certificates instead of the default $HOME/.pkg. You must have sufficient permissions to access this directory.

-t

The certificate being imported is a trusted CA certificate. pkgadm asks you to verify the details in the certificate; this step can be skipped with -y.

-V

Print version information for the package management programs.

-y

Do not bother verifying the details in a certificate being imported as a trusted certificate with -t.

-?

Print a help message.

Name

pkgask

Synopsis

/usr/sbin/pkgask [-d device] [-R root-path] -r response pkginst ...

This command creates response files for use with pkgadd. By producing "canned" responses for otherwise interactive installations, it's possible to install packages without requiring any interaction.

Options

-d device

Use device as the source for the package to be installed or copied.

-r response-file

The full pathname response-file for the output of pkgask. The argument may be a directory, in which case the response files for multiple packages are placed there, each one named according to the corresponding package.

-R root-path

Install all files under root-path. This is used on server systems when installing packages for clients.

Name

pkgchk

Synopsis

/usr/sbin/pkgchk [-d device] [options]pkginst

pkgchk checks the integrity of installed packages by comparing the information in the package file to what is actually on the system. With the -d option, it checks the packages on a particular device but cannot check the file attributes of the packages therein. The pkginst is a package name, possibly followed by .* to indicate all instances of the package.

Options

-a

Check file attributes only, do not check file contents.

-c

Check file contents only, do not check file attributes.

-d device

Use device as the source for the package to be checked.

-e file

Resolve parameters in the given package map file using information in the environment file file.

-f

Correct file attributes. With -x, remove hidden files.

-i file

Read pathnames from file and compare the list against the installation database or against the given package map file.

-l

List information on the files that make up a package. May not be used with -a, -c, -f, -g, or -v.

-m pkg-map-file

Check the package against pkg-map-file which is a package map file (see pkgmap(4)).

-M

Do not use $root_path/etc/vfstab for determining a client's mount points. Rather, assume that the mount points are correct on the server.

-n

Do not check files that are editable or are likely to change during normal operation. Intended for post-installation checking.

-p path

Check only the path listed. You can check multiple paths by separating pathnames with a comma, or quoting the list and separating them with spaces.

-P partial-path

Like -p, but checks the partial-path (a portion of a path, such as a file or directory name) instead of requiring a full path. It matches any pathname containing the partial-path.

-q

Quiet mode. Do not print messages about missing files.

-R root-path

Check all files under root-path. This is used on server systems when checking packages for clients.

-v

Verbose: list files as they are processed.

-V vfstab-file

Use vfstab-file instead of $root_path/etc/vfstab when checking packages. This is primarily useful on a server checking software for a client, where the client's /etc/vfstab file is not available or is incorrect.

-x

Search exclusive directories, looking for files which exist but are not in the database of installed packages or in the package map file.

-Ycategory[,category ...]

Check packages whose CATEGORY parameter in the package's pkginfo file matches one of the given categories.

Name

pkginfo

Synopsis

pkginfo [options] [pkginst ...]

With no options, display the primary category, package instance and names of all installed packages. With -d, provide information about the packages on the given device. With one or more pkginsts, print information about the named packages.

The pkginst may be a package name, optionally followed by a period and a version number to restrict it to a particular instance. Use .* to specify all instances.

Options

Options -l, -q and -x are mutually exclusive, and -p and -i have no meaning if used with -d.

-a arch

Use arch for the package's architecture.

-ccategory[,category ...]

Provide information about packages whose CATEGORY parameter in the package's pkginfo file matches one of the given categories.

-d device

Use device as the source for the package(s) to be described.

-i

Display information only about fully installed packages.

-l

Use long format output, which prints all available information.

-p

Display information only about partially installed packages.

-q

Quiet mode: do not display any information. Useful for scripts which need to check if a package has been installed.

-r

Print the installation base for relocatable packages.

-R root-path

Print information about all files under root-path. This is used on server systems when working with packages for clients.

-v version

Use version as the package version (corresponding to the VERSION parameter in the pkginfo file). All compatible versions can be requested by prefixing version with a ~ character.

-x

Print an "extracted" listing, giving the package abbreviation, the name, the architecture (if available), and the version (if available).

Name

pkgmk

Synopsis

pkgmk [options] [variable=value ...] [package-name]

pkgmk reads a package prototype file (see prototype(4)) and creates a package installable with pkgadd. It also creates the corresponding package map file (see pkgmap(4)). Prototype files are most easily created with pkgproto (see pkgproto).

variable=value places variable in the packaging environment with the given value. See prototype(4) for more information.

The package-name is a package name, optionally followed by a period and a version number to restrict it to a particular instance. Use .* to specify all instances.

pkgmk uses an elaborate algorithm for finding files to put in the package: see the pkgmk(1) manpage for the details.

Options

-a arch

Use arch as the architecture, overriding what's provided in the pkginfo file.

-b base-dir

Search under base-dir for objects named in the prototype file.

-d device

Use device as the destination for the package being built.

-f file

Use file as the prototype file. The default is to use a file named Prototype or prototype.

-l max

Use max as the maximum size of the output device. The value is in units of 512-byte blocks. Normally pkgmk uses df to determine if enough space is available.

-o

Overwrite the same instance of the package if it already exists.

-p stamp

Use stamp instead of the stamp definition in the pkginfo file.

-r root-path

Find files to be included in the package under root-path.

-v version

Use version as the version instead of what's in the pkginfo file.

Name

pkgparam

Synopsis

pkgparam [options] pkginst [param ...]
pkgparam -f filename[-v] [param ...]

pkgparam prints the values of the given parameters for the named packages. With no parameters, it prints the values of all parameters. By default it looks in the pkginfo file for the package, but the -f option restricts pkgparam to looking in the named file. pkginst is the package for which information should be printed.

Options

-d device

Use device as the source for the package to be processed.

-f file

Read parameter values from file instead of from the pkginfo file.

-R root-path

Process all files under root-path. This is used on server systems when working with packages for clients.

-v

Verbose mode. Display the parameter name and value, instead of just the value.

Name

pkgproto

Synopsis

pkgproto [-i] [-c class] [path1[=path2] ...]

pkgproto builds the prototype file for use with pkgmk. With no directories on the command line, it reads a list of pathnames from standard input to process. Otherwise, it processes the directories named on the command line. path1 is where objects are located on the system building the package. path2 indicates where the file should be placed on systems where the package is installed, if that location is different.

Options

-c class

Map the class of all objects to class.

-i

Follow symbolic links, recording them as regular files (ftype=f), instead of as links (ftype=s).

Name

pkgrm

Synopsis

/usr/sbin/pkgrm [options] [instances]
/usr/sbin/pkgrm -s spool [instances]

pkgrm removes installed packages. If some other package depends upon a package being removed, the action taken will be what's defined in the admin file.

Options

-a adminfile

Use adminfile as the removal administration file, instead of the system default file (/var/sadm/install/admin/default). This file specifies policies for installation and removal in terms of user interaction, how many instances of a package may be installed, and so on.

-A

Absolutely remove the package's files from the client's filesystem. However, if the file is shared with other packages, the default is not to remove it.

-M

Do not use $root_path/etc/vfstab for determining a client's mount points. Rather, assume that the mount points are correct on the server.

-n

Do a non-interactive removal. If a need for interaction arises, pkgrm exits.

-R root-path

Remove files from under root-path. This is used on server systems when removing packages for clients.

-s spooldir

Remove the package from spooldir instead of from the system.

-v

Verbose: trace execution of all scripts run by pkgrm.

-V vfstab-file

Use vfstab-file instead of $root_path/etc/vfstab when removing packages. This is primarily useful on a server removing software for a client, where the client's /etc/vfstab file is not available or is incorrect.

Instances

The instances parameter specifies which instances of the named packages should be installed.

pkg-name, pkg-name.*

Remove just the named package. With the suffix .*, all instances of the named package are removed.

-Ycategory[,category ...]

Remove packages whose CATEGORY parameter in the packages pkginfo file matches one of the given categories.

Name

removef

Synopsis

/usr/sbin/removef [options] pkginst path ...
/usr/sbin/removef [options] -fpkginst

removef updates the installation database with a list of pathnames that are about to be removed. The resulting output is a list of files that may be safely removed (i.e., for which there are no dependencies from other packages). This command is useful in scripts that are run when packages are removed; for example, removing device files created upon package installation.

Like installf, this command should be invoked twice; the first time before removing any files, and the second time, with the -f option, to indicate that the removal has indeed taken place. See also installf.

Options

-f

Indicate that removal is complete (final).

-M

Do not use $root_path/etc/vfstab for determining a client's mount points. Rather, assume that the mount points are correct on the server.

-R root-path

Remove files from under root-path. This is used on server systems when installing packages for clients.

-V vfstab-file

Use vfstab-file instead of $root_path/etc/vfstab when installing files. This is primarily useful on a server removing software for a client, where the client's /etc/vfstab file is not available or is incorrect.

Part II. Text Editing and Processing

Part II summarizes the command set for the text editors and related utilities in Unix. Chapter 7 reviews pattern matching, an important aspect of text editing.

Chapter 7, Pattern Matching

Chapter 8, The Emacs Editor

Chapter 9, The vi, ex, and vim Editors

Chapter 10, The sed Editor

Chapter 11, The awk Programming Language

Chapter 7. Pattern Matching

A number of Unix text-processing utilities let you search for, and in some cases change, text patterns rather than fixed strings. These utilities include the editing programs ed, ex, vi, and sed, the awk programming language, and the commands grep and egrep. Text patterns (called regular expressions in the computer science literature) contain normal characters mixed with special characters (called metacharacters ).

This chapter presents the following topics:

Filenames versus patterns

Description of metacharacters

List of metacharacters available to each program

Examples

For more information on regular expressions, see Mastering Regular Expressions, listed in the Bibliography.

Filenames Versus Patterns

Metacharacters used in pattern matching are different from metacharacters used for filename expansion (see Chapter 4 and Chapter 5). However, several metacharacters have meaning for both regular expressions and for filename expansion. This can lead to a problem: the shell sees the command line first, and can potentially interpret an unquoted regular expression metacharacter as a filename expansion. For example, the command:

$ grep [A-Z]* chap[12]

could be transformed by the shell into:

$ grep Array.c Bug.c Comp.c chap1 chap2

and grep would then try to find the pattern Array.c in files Bug.c, Comp.c, chap1, and chap2. To bypass the shell and pass the special characters to grep, use quotes as follows:

$ grep "[A-Z]*" chap[12]

Double quotes suffice in most cases, but single quotes are the safest bet, since the shell does absolutely no expansions on single-quoted text.

Note also that in pattern matching, ? matches zero or one instance of a regular expression; in filename expansion, ? matches a single character.

Metacharacters

Different metacharacters have different meanings, depending upon where they are used. In particular, regular expressions used for searching through text (matching) have one set of metacharacters, while the metacharacters used when processing replacement text (such as in a text editor) have a different set. These sets also vary somewhat per program. This section covers the metacharacters used for searching and replacing, with descriptions of the variants in the different utilities.

Search Patterns

The characters in the following table have special meaning only in search patterns .

Character

Pattern

.

Match any single character except newline. Can match newline in awk.

*

Match any number (or none) of the single character that immediately precedes it. The preceding character can also be a regular expression. For example, since . (dot) means any character, .* means "match any number of any character."

^

Match the following regular expression at the beginning of the line or string.

$

Match the preceding regular expression at the end of the line or string.

[ ]

Match any one of the enclosed characters: a hyphen (-) indicates a range of consecutive characters. A circumflex (^) as the first character in the brackets reverses the sense: it matches any one character not in the list. A hyphen or close bracket (]) as the first character is treated as a member of the list. All other metacharacters are treated as members of the list (i.e., literally).

{ n , m }

Match a range of occurrences of the single character that immediately precedes it. The preceding character can also be a regular expression. { n } matches exactly n occurrences, { n ,} matches at least n occurrences, and { n , m } matches any number of occurrences between n and m. n and m must be between 0 and 255, inclusive. (GNU programs allow a range of 0 to 32,767.)

\{ n , m \}

Just like { n , m }, earlier, but with backslashes in front of the braces. (Historically, different utilities used different syntaxes for the same thing.)

\

Turn off the special meaning of the following character.

\( \)

Save the subpattern enclosed between \( and \) into a special holding space. Up to nine subpatterns can be saved on a single line. The text matched by the subpatterns can be "replayed" in substitutions by the escape sequences \1 to \9.

\ n

Replay the nth subpattern enclosed in \( and \) into the pattern at this point. n is a number from 1 to 9, with 1 starting on the left. See the following Examples.

\< \>

Match characters at beginning (\<) or end (\>) of a word.

+

Match one or more instances of preceding regular expression.

?

Match zero or one instances of preceding regular expression.

|

Match the regular expression specified before or after the vertical bar (alternation).

()

Apply a match to the enclosed group of regular expressions.

Many Unix systems allow the use of POSIX "character classes" within the square brackets that enclose a group of characters. They are typed enclosed in [: and :]. For example, [[:alnum:]] matches a single alphanumeric character.

Class

Characters matched

alnum

Alphanumeric characters

lower

Lowercase characters

alpha

Alphabetic characters

print

Printable characters

blank

Space or TAB

punct

Punctuation characters

cntrl

Control characters

space

Whitespace characters

digit

Decimal digits

upper

Uppercase characters

graph

Non-space characters

xdigit

Hexadecimal digits

Finally, the GNU versions of the standard utilities accept additional escape sequences that act like metacharacters . (Because \b can also be interpreted as the sequence for the ASCII Backspace character, different utilities treat it differently. Check each utility's documentation.)

Sequence

Meaning

\b

Word boundary, either beginning or end of a word, as for the \< and \> metacharacters described earlier.

\B

Interword match; matches between two word-constituent characters.

\w

Matches any word-constituent character; equivalent to [[:alnum:]_].

\W

Matches any non-word-constituent character; equivalent to [^[:alnum:]_].

\'

Beginning of an Emacs buffer. Used by most other GNU utilities to mean unambiguously "beginning of string."

\'

End of an Emacs buffer. Used by most other GNU utilities to mean unambiguously "end of string."

Replacement Patterns

The characters in the following table have special meaning only in replacement patterns .

Character

Pattern

\

Turn off the special meaning of the following character.

\ n

Reuse the text matched by the nth subpattern previously saved by \( and \) as part of the replacement pattern . n is a number from 1 to 9, with 1 starting on the left.

&

Reuse the text matched by the search pattern as part of the replacement pattern.

~

Reuse the previous replacement pattern in the current replacement pattern. Must be the only character in the replacement pattern (ex and vi).

%

Reuse the previous replacement pattern in the current replacement pattern. Must be the only character in the replacement pattern (ed).

\u

Convert first character of replacement pattern to uppercase.

\U

Convert entire replacement pattern to uppercase.

\l

Convert first character of replacement pattern to lowercase.

\L

Convert entire replacement pattern to lowercase.

\e

Turn off previous \u or \l.

\E

Turn off previous \U or \L.

Metacharacters, Listed by Unix Program

Some metacharacters are valid for one program but not for another. Those that are available are marked by a bullet (·) in Table 7-1. (This table is correct for most commercial Unix systems, including Solaris.) Items marked with a "P" are specified by POSIX; double-check your system's version. (On Solaris, the versions in /usr/xpg4/bin and /usr/xpg6/bin accept these items.) Full descriptions were provided in the previous section.

Table 7-1. Unix metacharacters

Symbol

ed

ex

vi

sed

awk

grep

egrep

Action

Stored subpatterns can be "replayed" during matching. See Table 7-2.

.

·

·

·

·

·

·

·

Match any character.

*

·

·

·

·

·

·

·

Match zero or more preceding.

^

·

·

·

·

·

·

·

Match beginning of line/string.

$

·

·

·

·

·

·

·

Match end of line/string.

\

·

·

·

·

·

·

·

Escape following character.

[ ]

·

·

·

·

·

·

·

Match one from a set.

\( \)

·

·

·

·

·

Store pattern for later replay.*

\ n

·

·

·

·

·

Replay subpattern in match.

{ }

· P

· P

Match a range of instances.

\{ \}

·

·

·

Match a range of instances.

\< \>

·

·

·

Match word's beginning or end.

+

·

·

Match one or more preceding.

?

·

·

Match zero or one preceding.

|

·

·

Separate choices to match.

()

·

·

Group expressions to match.

Note that in ed, ex, vi, and sed, you specify both a search pattern (on the left) and a replacement pattern (on the right). The metacharacters in Table 7-1 are meaningful only in a search pattern.

In ed, ex, vi , and sed, the metacharacters in Table 7-2 are valid only in a replacement pattern.

Table 7-2. Metacharacters in replacement patterns

Symbol

ex

vi

sed

ed

Action

\

·

·

·

·

Escape following character.

\ n

·

·

·

·

Text matching pattern stored in \( \).

&

·

·

·

·

Text matching search pattern.

~

·

·

Reuse previous replacement pattern.

%

·

Reuse previous replacement pattern.

\u \U

·

·

Change character(s) to uppercase.

\l \L

·

·

Change character(s) to lowercase.

\e

·

·

Turn off previous \u or \l.

\E

·

·

Turn off previous \U or \L.

Examples of Searching

When used with grep or egrep, regular expressions should be surrounded by quotes. (If the pattern contains a $, you must use single quotes; e.g., ' pattern '.) When used with ed, ex, sed, and awk, regular expressions are usually surrounded by /, although (except for awk) any delimiter works. The following tables show some example patterns.

Pattern

What does it match?

bag

The string bag.

^bag

bag at the beginning of the line.

bag$

bag at the end of the line.

^bag$

bag as the only word on the line.

[Bb]ag

Bag or bag.

b[aeiou]g

Second letter is a vowel.

b[^aeiou]g

Second letter is a consonant (or uppercase or symbol).

b.g

Second letter is any character.

^...$

Any line containing exactly three characters.

^\.

Any line that begins with a dot.

^\.[a-z][a-z]

Same, followed by two lowercase letters (e.g., troff requests).

^\.[a-z]\{2\}

Same as previous, ed, grep, and sed only.

^[^.]

Any line that doesn't begin with a dot.

bugs*

bug, bugs, bugss, etc.

"word"

A word in quotes.

"*word"*

A word, with or without quotes.

[A-Z][A-Z]*

One or more uppercase letters.

[A-Z]+

Same; egrep or awk only.

[[:upper:]]+

Same as previous, POSIX egrep or awk.

[A-Z].*

An uppercase letter, followed by zero or more characters.

[A-Z]*

Zero or more uppercase letters.

[a-zA-Z]

Any letter, either lower- or uppercase.

[^0-9A-Za-z]

Any symbol or space (not a letter or a number).

[^[:alnum:]]

Same, using POSIX character class.

egrep or awk pattern

What does it match?

[567]

One of the numbers 5, 6, or 7.

five|six|seven

One of the words five, six, or seven.

80[2-4]?86

8086, 80286, 80386, or 80486.

80[2-4]?86|(Pentium(-III?)?)

8086, 80286, 80386, 80486, Pentium, Pentium-II, or Pentium-III.

compan(y|ies)

company or companies.

ex or vi pattern

What does it match?

\<the

Words like theater or the.

the\>

Words like breathe or the.

\<the\>

The word the.

ed, sed, or grep pattern

What does it match?

0\{5,\}

Five or more zeros in a row.

[0-9]\{3\}-[0-9]\{2\}-[0-9]\{4\}

U.S. Social Security number (nnn-nn-nnnn).

\(why\).*\1

A line with two occurrences of why.

\([[:alpha:]_][[:alnum:]_.]*\) = \1;

C/C++ simple assignment statements.

Examples of Searching and Replacing

The examples in Table 7-3 show the metacharacters available to sed or ex. Note that ex commands begin with a colon. A space is marked by a □; a TAB is marked by a →.

Table 7-3. Searching and replacing

Command

Result

s/.*/( & )/

Redo the entire line, but add spaces and parentheses.

s/.*/mv & &.old/

Change a wordlist (one word per line) into mv commands.

/^$/d

Delete blank lines.

:g/^$/d

Same as previous, in ex editor.

/^[ □ → ]*$/d

Delete blank lines, plus lines containing only spaces or TABs.

:g/^[ □ → ]*$/d

Same as previous, in ex editor.

s/ □ □ */ □ /g

Turn one or more spaces into one space.

:%s/ □ □ */ □ /g

Same as previous, in ex editor.

:s/[0–9]/Item &:/

Turn a number into an item label (on the current line).

:s

Repeat the substitution on the first occurrence.

:&

Same as previous.

:sg

Same as previous, but for all occurrences on the line.

:&g

Same as previous.

:%&g

Repeat the substitution globally (i.e., on all lines).

:.,$s/Fortran/\U&/g

On current line to last line, change word to uppercase.

:.,$s/\(F\)\(ORTRAN\)/\1\L\2/g

On current line to last line, change spelling of "FORTRAN" to correct, modern usage.

:%s/.*/\L&/

Lowercase entire file.

:s/\<./\u&/g

Uppercase first letter of each word on current line. (Useful for titles.)

:%s/yes/No/g

Globally change a word to No.

:%s/Yes/~/g

Globally change a different word to No (previous replacement).

Finally, here are some sed examples for transposing words. A simple transposition of two words might look like this:

s/die or do/do or die/                 Transpose words

The real trick is to use hold buffers to transpose variable patterns. For example:

s/\([Dd]ie\) or \([Dd]o\)/\2 or \1/    Transpose, using hold buffers

Chapter 8. The Emacs Editor

Although most commercial operating systems do not come with Emacs , it is available for all versions of Unix, including Mac OS X, and MS-Windows. (GNU/Linux systems usually do supply it.) On all these systems, there are often multiple versions: one for character terminals, another for X11, and possibly yet another for the native windowing system. This text editor is a popular alternative to vi. This chapter documents GNU Emacs (Version 21.3), which is available from the Free Software Foundation (http://www.gnu.org/software/emacs).

This chapter presents the following topics:

Conceptual overview

Command-line syntax

Summary of emacs commands by group

Summary of emacs commands by key

Summary of emacs commands by name

For more information about emacs, see Learning GNU Emacs, listed in the Bibliography.

Conceptual Overview

This section describes some Emacs terminology that may be unfamiliar if you haven't used Emacs before.

Modes

One of the features that makes Emacs popular is its editing modes . The modes set up an environment designed for the type of editing you are doing, with features like having appropriate key bindings available, and automatically indenting according to standard conventions for a particular type of document. There are two types of modes, major and minor. The major modes include modes for various programming languages like C or Java, for text processing (e.g., SGML or even straight text), and many more. One particularly useful major mode is Dired (Directory Editor), which has commands that let you manage directories. Minor modes set or unset features that are independent of the major mode, such as auto-fill (which controls line wrapping), insert versus overwrite, and auto-save. For a full discussion of modes, see Learning GNU Emacs or the Emacs Info documentation system (C-h i).

Buffer and Window

When you open a file in Emacs, the file is put into a buffer so you can edit it. If you open another file, that file goes into another buffer. The view of the buffer contents that you have at any point in time is called a window. For a small file, the window might show the entire file; for a large file, it shows only a portion of a file. Emacs allows multiple windows to be open at the same time, to display the contents of different buffers or different portions of a single buffer.

Point and Mark

When you are editing in Emacs, the position of the cursor is known as point. You can set a mark at another place in the text to operate on the region between point and mark . This is a very useful feature for such operations as deleting or moving an area of text.

Kill and Yank

Emacs uses the terms kill and yank for the concepts more commonly known today as cut and paste. You cut text in Emacs by killing it, and paste it by yanking it back. If you do multiple kills in a row, you can yank them back all at once.

Emacs can store any number of deleted chunks up to a user-settable maximum. In addition, it has powerful Undo and Redo facilities, letting you undo all the changes back to the last time your file was saved.

Notes on the Tables

Emacs commands use the Control key and the Meta key (Meta is usually the Alt key or the Escape key). In this chapter, the notation C- indicates that the Control key is pressed at the same time as the character that follows. Similarly, M- indicates the use of the Meta key. When using Escape for Meta, press and release the Escape key, then type the next key. If you use Alt (or Option on the Macintosh) for Meta, it is just like Control or Shift, and you should press it simultaneously with the other key(s).

In the command tables that follow, the first column lists the keystroke and the last column describes it. When there is a middle column, it lists the command name. If there are no keystrokes for a given command, you'll see (none) in the first column. Access these commands by typing M-x followed by the command name. If you're unsure of the name, you can type a tab or a carriage return, and Emacs lists possible completions of what you've typed so far.

Because Emacs is such a comprehensive editor, containing literally thousands of commands, some commands must be omitted for the sake of preserving a "quick" reference. You can browse the command set by typing C-h (for help) or M-x Tab (for command names).

Absolutely Essential Commands

If you're just getting started with Emacs, here's a short list of the most important commands:

Keystrokes

Description

C-h

Enter the online help system.

C-x C-s

Save the file.

C-x C-c

Exit emacs.

C-_

Undo last edit (can be repeated).

C-g

Get out of current command operation.

C-p

Up/down/forward/back by line or character.

C-n

C-f

C-b

C-v

Forward/backward by one screen.

M-v

C-s

Search forward/backward for characters.

C-r

C-d

Delete next/previous character.

Del

Command-Line Syntax

To start an Emacs editing session, type:

emacs [file]

Summary of Commands by Group

Reminder: C- indicates the Control key; M- indicates the Meta key.

File-Handling Commands

Keystrokes

Command name

Description

C-x C-f

find-file

Find file and read it.

C-x C-v

find-alternate-file

Read another file; replace the one read with C-x C-f.

C-x i

insert-file

Insert file at cursor position.

C-x C-s

save-buffer

Save file (may hang terminal; use C-q to restart).

C-x C-w

write-file

Write buffer contents to file.

C-x C-c

save-buffers-kill-emacs

Exit emacs.

C-z

suspend-emacs

Suspend emacs (use exit or fg to restart).

Cursor-Movement Commands

Keystrokes

Command name

Description

C-f

forward-char

Move forward one character (right).

C-b

backward-char

Move backward one character (left).

C-p

previous-line

Move to previous line (up).

C-n

next-line

Move to next line (down).

M-f

forward-word

Move one word forward.

M-b

backward-word

Move one word backward.

C-a

beginning-of-line

Move to beginning of line.

C-e

end-of-line

Move to end of line.

M-a

backward-sentence

Move backward one sentence.

M-e

forward-sentence

Move forward one sentence.

M-{

backward-paragraph

Move backward one paragraph.

M-}

forward-paragraph

Move forward one paragraph.

C-v

scroll-up

Move forward one screen.

M-v

scroll-down

Move backward one screen.

C-x [

backward-page

Move backward one page.

C-x ]

forward-page

Move forward one page.

M->

end-of-buffer

Move to end of file.

M-<

beginning-of-buffer

Move to beginning of file.

(none)

goto-line

Go to line n of file.

(none)

goto-char

Go to character n of file.

C-l

recenter

Redraw screen with current line in the center.

M-n

digit-argument

Repeat the next command n times.

C-u n

universal-argument

Repeat the next command n times.

Deletion Commands

Keystrokes

Command name

Description

Del

backward-delete-char

Delete previous character.

C-d

delete-char

Delete character under cursor.

M-Del

backward-kill-word

Delete from point to beginning of word.

M-d

kill-word

Delete from point to end of word.

C-k

kill-line

Delete from cursor to end of line.

M-k

kill-sentence

Delete from point to end of sentence.

C-x Del

backward-kill-sentence

Delete from point to beginning of sentence.

C-y

yank

Restore what you've deleted.

C-w

kill-region

Delete a marked region (see next section).

(none)

backward-kill-paragraph

Delete previous paragraph.

(none)

kill-paragraph

Delete from the cursor to the end of the paragraph.

Paragraphs and Regions

Keystrokes

Command name

Description

C-@

set-mark-command

Mark the beginning (or end) of a region.

C-Space

(same as above)

C-x C-p

mark-page

Mark page.

C-x C-x

exchange-point-and-mark

Exchange location of cursor and mark.

C-x h

mark-whole-buffer

Mark buffer.

M-q

fill-paragraph

Reformat paragraph.

(none)

fill-region

Reformat individual paragraphs within a region.

M-h

mark-paragraph

Mark paragraph.

Stopping and Undoing Commands

Keystrokes

Command name

Description

C-g

keyboard-quit

Abort current command.

C-_

advertised-undo

Undo last edit (can be done repeatedly).

(none)

revert-buffer

Restore buffer to the state it was in when the file was last saved (or auto-saved).

Transposition Commands

Keystrokes

Command name

Description

C-t

transpose-chars

Transpose two letters.

M-t

transpose-words

Transpose two words.

C-x C-t

transpose-lines

Transpose two lines.

(none)

transpose-sentences

Transpose two sentences.

(none)

transpose-paragraphs

Transpose two paragraphs.

Search Commands

Keystrokes

Command name

Description

C-s

isearch-forward

Incremental search forward.

C-r

isearch-backward

Incremental search backward

M-%

query-replace

Search and replace.

C-M-s Enter

re-search-forward

Regular expression search forward.

C-M-r Enter

re-search-backward

Regular expression search backward

Capitalization Commands

Keystrokes

Command name

Description

M-c

capitalize-word

Capitalize first letter of word.

M-u

upcase-word

Uppercase word.

M-l

downcase-word

Lowercase word.

M- - M-c

negative-argument; capitalize-word

Capitalize previous word.

M- - M-u

negative-argument; upcase-word

Uppercase previous word.

M- - M-l

negative-argument; downcase-word

Lowercase previous word.

(none)

capitalize-region

Capitalize region.

C-x C-u

upcase-region

Uppercase region

C-x C-l

downcase-region

Lowercase region.

Word-Abbreviation Commands

Keystrokes

Command name

Description

(none)

abbrev-mode

Enter (or exit) word abbreviation mode.

M-/

dabbrev-expand

Expand to the most recent preceding word.

C-x a i g

inverse-add-global-abbrev

Type global abbreviation, then definition.

C-x a i l

inverse-add-local-abbrev

Type local abbreviation, then definition.

(none)

unexpand-abbrev

Undo the last word abbreviation.

(none)

write-abbrev-file

Write the word abbreviation file.

(none)

edit-abbrevs

Edit the word abbreviations.

(none)

list-abbrevs

View the word abbreviations.

(none)

kill-all-abbrevs

Kill abbreviations for this session.

Buffer-Manipulation Commands

Keystrokes

Command name

Description

C-x b

switch-to-buffer

Move to specified buffer.

C-x C-b

list-buffers

Display buffer list.

C-x k

kill-buffer

Delete specified buffer.

(none)

kill-some-buffers

Ask about deleting each buffer.

(none)

rename-buffer

Change buffer name to specified name.

C-x s

save-some-buffers

Ask whether to save each modified buffer.

Window Commands

Keystrokes

Command name

Description

C-x 2

split-window-vertically

Divide the current window into two, one on top of the other.

C-x 3

split-window-horizontally

Divide the current window into two, side by side.

C-x >

scroll-right

Scroll the window right.

C-x <

scroll-left

Scroll the window left.

C-x o

other-window

Move to the other window.

C-x 0

delete-window

Delete current window.

C-x 1

delete-other-windows

Delete all windows but this one.

(none)

delete-windows-on

Delete all windows on a given buffer.

C-x ^

enlarge-window

Make window taller.

(none)

shrink-window

Make window shorter.

C-x }

enlarge-window-horizontally

Make window wider.

C-x {

shrink-window-horizontally

Make window narrower.

C-M-v

scroll-other-window

Scroll other window.

C-x 4 f

find-file-other-window

Find a file in the other window.

C-x 4 b

switch-to-buffer-other-window

Select a buffer in the other window.

C-x 5 f

find-file-other-frame

Find a file in a new frame.

C-x 5 b

switch-to-buffer-other-frame

Select a buffer in another frame.

(none)

compare-windows

Compare two buffers; show first difference.

Special Shell Characters

Keystrokes

Command name

Description

(none)

shell

Start a shell buffer.

C-c C-c

comint-interrupt-subjob

Terminate the current job.

C-c C-d

comint-send-eof

End of file character.

C-c C-u

comint-kill-inputw

Erase current line.

C-c C-w

backward-kill-word

Erase the previous word.

C-c C-z

comint-stop-subjob

Suspend the current job.

Indentation Commands

Keystrokes

Command name

Description

C-x .

set-fill-prefix

Use characters from the beginning of the line up to the cursor column as the "fill prefix." This prefix is prepended to each line in the paragraph. Cancel the prefix by typing this command in column 1.

(none)

indented-text-mode

Major mode: each tab defines a new indent for subsequent lines.

(none)

text-mode

Exit indented text mode; return to text mode.

C-M-\

indent-region

Indent a region to match first line in region.

M-m

back-to-indentation

Move cursor to first character on line.

C-M-o

split-line

Split line at cursor; indent to column of cursor.

(none)

fill-individual-paragraphs

Reformat indented paragraphs, keeping indentation.

Centering Commands

Keystrokes

Command name

Description

M-s

center-line

Center line that cursor is on.

(none)

center-paragraph

Center paragraph that cursor is on.

(none)

center-region

Center currently defined region.

Macro Commands

Keystrokes

Command name

Description

C-x (

start-kbd-macro

Start macro definition.

C-x )

end-kbd-macro

End macro definition.

C-x e

call-last-kbd-macro

Execute last macro defined.

M-n C-x e

digit-argument and call-last-kbd-macro

Execute last macro defined n times.

C-u C-x (

universal-argument and start-kbd-macro

Execute last macro defined, then add keystrokes.

(none)

name-last-kbd-macro

Name last macro you created (before saving it).

(none)

insert-keyboard-macro

Insert the macro you named into a file.

(none)

load-file

Load macro files you've saved and loaded.

(none)

macroname

Execute a keyboard macro you've saved.

C-x q

kbd-macro-query

Insert a query in a macro definition.

C-u C-x q

(none)

Insert a recursive edit in a macro definition.

C-M-c

exit-recursive-edit

Exit a recursive edit.

Basic Indentation Commands

Keystrokes

Command name

Description

C-M-\

indent-region

Indent a region to match first line in region.

M-m

back-to-indentation

Move to first nonblank character on line.

M-^

delete-indentation

Join this line to the previous one.

Detail Information Help Commands

Keystrokes

Command name

Description

C-h a

command-apropos

What commands involve this concept?

(none)

apropos

What functions and variables involve this concept?

C-h c

describe-key-briefly

What command does this keystroke sequence run?

C-h b

describe-bindings

What are all the key bindings for this buffer?

C-h k

describe-key

What command does this keystroke sequence run, and what does it do?

C-h l

view-lossage

What are the last 100 characters I typed?

C-h w

where-is

What is the key binding for this command?

C-h f

describe-function

What does this function do?

C-h v

describe-variable

What does this variable mean, and what is its value?

C-h m

describe-mode

Tell me about the mode the current buffer is in.

C-h s

describe-syntax

What is the syntax table for this buffer?

Help Commands

Keystrokes

Command name

Description

C-h t

help-with-tutorial

Run the emacs tutorial.

C-h i

info

Start the Info documentation reader.

C-h n

view-emacs-news

View news about updates to emacs.

C-h C-c

describe-copying

View the emacs General Public License.

C-h C-d

describe-distribution

View information on ordering emacs from the FSF.

C-h C-w

describe-no-warranty

View the (non)warranty for emacs.

Summary of Commands by Key

Emacs commands are presented below in two alphabetical lists. Reminder: C- indicates the Control key; M- indicates the Meta key.

Control-Key Sequences

Keystrokes

Command name

Description

C-@

set-mark-command

Mark the beginning (or end) of a region.

C-Space

(same as previous)

C-]

(none)

Exit recursive edit and exit query-replace.

C-a

beginning-of-line

Move to beginning of line.

C-b

backward-char

Move backward one character (left).

C-c C-c

comint-interrupt-subjob

Terminate the current job.

C-c C-d

comint-send-eof

End-of-file character.

C-c C-u

comint-kill-input

Erase current line.

C-c C-w

backward-kill-word

Erase the previous word.

C-c C-z

comint-stop-subjob

Suspend the current job.

C-d

delete-char

Delete character under cursor.

C-e

end-of-line

Move to end of line.

C-f

forward-char

Move forward one character (right).

C-g

keyboard-quit

Abort current command.

C-h

help-command

Enter the online help system.

C-h a

command-apropos

What commands involve this concept?

C-h b

describe-bindings

What are all the key bindings for this buffer?

C-h C-c

describe-copying

View the emacs General Public License.

C-h C-d

describe-distribution

View information on ordering emacs from FSF.

C-h C-w

describe-no-warranty

View the (non-)warranty for emacs.

C-h c

describe-key-briefly

What command does this keystroke sequence run?

C-h f

describe-function

What does this function do?

C-h i

info

Start the Info documentation reader.

C-h k

describe-key

What command does this keystroke sequence run, and what does it do?

C-h l

view-lossage

What are the last 100 characters I typed?

C-h m

describe-mode

Tell me about the mode the current buffer is in.

C-h n

view-emacs-news

View news about updates to emacs.

C-h s

describe-syntax

What is the syntax table for this buffer?

C-h t

help-with-tutorial

Run the emacs tutorial.

C-h v

describe-variable

What does this variable mean, and what is its value?

C-h w

where-is

What is the key binding for this command?

C-k

kill-line

Delete from cursor to end of line.

C-l

recenter

Redraw screen with current line in the center.

C-M-\

indent-region

Indent a region to match first line in region.

C-M-c

exit-recursive-edit

Exit a recursive edit.

C-M-o

split-line

Split line at cursor; indent to column of cursor.

C-M-v

scroll-other-window

Scroll other window.

C-n

next-line

Move to next line (down).

C-p

previous-line

Move to previous line (up).

C-r

isearch-backward

Start incremental search backward.

C-s

isearch-forward

Start incremental search forward.

C-t

transpose-chars

Transpose two letters.

C-u n

universal-argument

Repeat the next command n times.

C-u C-x (

universal-argument and start-kbd-macro

Execute last macro defined, then add keystrokes.

C-u C-x q

(none)

Insert recursive edit in a macro definition.

C-v

scroll-up

Move forward one screen.

C-w

kill-region

Delete a marked region.

C-x (

start-kbd-macro

Start macro definition.

C-x )

end-kbd-macro

End macro definition.

C-x [

backward-page

Move backward one page.

C-x ]

forward-page

Move forward one page.

C-x ^

enlarge-window

Make window taller.

C-x {

shrink-window-horizontally

Make window narrower.

C-x }

enlarge-window-horizontally

Make window wider.

C-x <

scroll-left

Scroll the window left.

C-x >

scroll-right

Scroll the window right.

C-x .

set-fill-prefix

Use characters from the beginning of the line up to the cursor column as the "fill prefix." This prefix is prepended to each line in the paragraph. Cancel the prefix by typing this command in column 1.

C-x 0

delete-window

Delete current window.

C-x 1

delete-other-windows

Delete all windows but this one.

C-x 2

split-window-vertically

Divide the current window into two, one on top of the other.

C-x 3

split-window-horizontally

Divide the current window into two, side by side.

C-x 4 b

switch-to-buffer-other-window

Select a buffer in the other window.

C-x 4 f

find-file-other-window

Find a file in the other window.

C-x 5 b

switch-to-buffer-other-frame

Select a buffer in another frame.

C-x 5 f

find-file-other-frame

Find a file in a new frame.

C-x C-b

list-buffers

Display the buffer list.

C-x C-c

save-buffers-kill-emacs

Exit emacs.

C-x C-f

find-file

Find file and read it.

C-x C-l

downcase-region

Lowercase region.

C-x C-p

mark-page

Mark page.

C-x C-q

(none)

Toggle read-only status of buffer.

C-x C-s

save-buffer

Save file (may hang terminal; use C-q to restart).

C-x C-t

transpose-lines

Transpose two lines.

C-x C-u

upcase-region

Uppercase region

C-x C-v

find-alternate-file

Read an alternate file, replacing the one read with C-x C-f.

C-x C-w

write-file

Write buffer contents to file.

C-x C-x

exchange-point-and-mark

Exchange location of cursor and mark.

C-x DEL

backward-kill-sentence

Delete previous sentence.

C-x a i g

inverse-add-global-abbrev

Type global abbreviation, then definition.

C-x a i l

inverse-add-local-abbrev

Type local abbreviation, then definition.

C-x b

switch-to-buffer

Move to the buffer specified.

C-x e

call-last-kbd-macro

Execute last macro defined.

C-x h

mark-whole-buffer

Mark buffer.

C-x i

insert-file

Insert file at cursor position.

C-x k

kill-buffer

Delete the buffer specified.

C-x o

other-window

Move to the other window.

C-x q

kbd-macro-query

Insert a query in a macro definition.

C-x s

save-some-buffers

Ask whether to save each modified buffer.

C-_

advertised-undo

Undo last edit (can be done repeatedly).

C-y

yank

Restore what you've deleted.

C-z

suspend-emacs

Suspend emacs (use exit or fg to restart).

Meta-Key Sequences

Keystrokes

Command name

Description

Meta

(none)

Exit a query-replace or successful search.

M- - M-c

negative-argument; capitalize-word

Capitalize previous word.

M- - M-l

negative-argument; downcase-word

Lowercase previous word.

M- - M-u

negative-argument; upcase-word

Uppercase previous word.

M-$

spell-word

Check spelling of word after cursor.

M-<

beginning-of-buffer

Move to beginning of file.

M->

end-of-buffer

Move to end of file.

M-{

backward-paragraph

Move backward one paragraph.

M-}

forward-paragraph

Move forward one paragraph.

M-^

delete-indentation

Join this line to the previous one.

M-/

dabbrev-expand

Expand to the most recent preceding word.

M-n

digit-argument

Repeat the next command n times.

M-n C-x e

digit-argument and call-last-kbd-macro

Execute the last defined macro, n times.

M-a

backward-sentence

Move backward one sentence.

M-b

backward-word

Move one word backward.

M-c

capitalize-word

Capitalize first letter of word.

M-d

kill-word

Delete word that cursor is on.

M-DEL

backward-kill-word

Delete previous word.

M-e

forward-sentence

Move forward one sentence.

M-f

forward-word

Move one word forward.

(none)

fill-region

Reformat individual paragraphs within a region.

M-h

mark-paragraph

Mark paragraph.

M-k

kill-sentence

Delete sentence the cursor is on.

M-l

downcase-word

Lowercase word.

M-m

back-to-indentation

Move cursor to first nonblank character on line.

M-q

fill-paragraph

Reformat paragraph.

M-s

center-line

Center line that cursor is on.

M-t

transpose-words

Transpose two words.

M-u

upcase-word

Uppercase word.

M-v

scroll-down

Move backward one screen.

M-x

(none)

Access command by command name.

Summary of Commands by Name

The emacs commands below are presented alphabetically by command name. Use M-x to access the command name. Reminder: C- indicates the Control key; M- indicates the Meta key.

Command name

Keystrokes

Description

macroname

(none)

Execute a keyboard macro you've saved.

abbrev-mode

(none)

Enter (or exit) word abbreviation mode.

advertised-undo

C-_

Undo last edit (can be done repeatedly).

apropos

(none)

What functions and variables involve this concept?

back-to-indentation

M-m

Move cursor to first nonblank character on line.

backward-char

C-b

Move backward one character (left).

backward-delete-char

Del

Delete previous character.

backward-kill-paragraph

(none)

Delete previous paragraph.

backward-kill-sentence

C-x Del

Delete previous sentence.

backward-kill-word

C-c C-w

Erase previous word.

backward-kill-word

M-Del

Delete previous word.

backward-page

C-x [

Move backward one page.

backward-paragraph

M-{

Move backward one paragraph.

backward-sentence

M-a

Move backward one sentence.

backward-word

M-b

Move backward one word.

beginning-of-buffer

M-<

Move to beginning of file.

beginning-of-line

C-a

Move to beginning of line.

call-last-kbd-macro

C-x e

Execute last macro defined.

capitalize-region

(none)

Capitalize region.

capitalize-word

M-c

Capitalize first letter of word.

center-line

M-s

Center line that cursor is on.

center-paragraph

(none)

Center paragraph that cursor is on.

center-region

(none)

Center currently defined region.

comint-interrupt-subjob

C-c C-c

Terminate the current job.

comint-kill-input

C-c C-u

Erase current line.

comint-send-eof

C-c C-d

End of file character.

comint-stop-subjob

C-c C-z

Suspend current job.

command-apropos

C-h a

What commands involve this concept?

compare-windows

(none)

Compare two buffers; show first difference.

dabbrev-expand

M-/

Expand to the most recent preceding word.

M-^

delete-indentation

Join this line to the previous one.

delete-char

C-d

Delete character under cursor.

delete-indentation

M-^

Join this line to previous one.

delete-other-windows

C-x 1

Delete all windows but this one.

delete-window

C-x 0

Delete current window.

delete-windows-on

(none)

Delete all windows on a given buffer.

describe-bindings

C-h b

What are all the key bindings for in this buffer?

describe-copying

C-h C-c

View the emacs General Public License.

describe-distribution

C-h C-d

View information on ordering emacs from the FSF.

describe-function

C-h f

What does this function do?

describe-key

C-h k

What command does this keystroke sequence run, and what does it do?

describe-key-briefly

C-h c

What command does this keystroke sequence run?

describe-mode

C-h m

Tell me about the mode the current buffer is in.

describe-no-warranty

C-h C-w

View the (non)warranty for emacs.

describe-syntax

C-h s

What is the syntax table for this buffer?

describe-variable

C-h v

What does this variable mean, and what is its value?

digit-argument and call-last-kbd-macro

M-n C-x e

Execute the last defined macro, n times.

digit-argument

M-n

Repeat next command, n times.

downcase-region

C-x C-l

Lowercase region.

downcase-word

M-l

Lowercase word.

edit-abbrevs

(none)

Edit word abbreviations.

end-kbd-macro

C-x )

End macro definition.

end-of-buffer

M->

Move to end of file.

end-of-line

C-e

Move to end of line.

enlarge-window

C-x ^

Make window taller.

enlarge-window-horizontally

C-x }

Make window wider.

exchange-point-and-mark

C-x C-x

Exchange location of cursor and mark.

exit-recursive-edit

C-M-c

Exit a recursive edit.

fill-individual-paragraphs

(none)

Reformat indented paragraphs, keeping indentation.

fill-paragraph

M-q

Reformat paragraph.

fill-region

(none)

Reformat individual paragraphs within a region.

find-alternate-file

C-x C-v

Read an alternate file, replacing the one read with C-x C-f.

find-file

C-x C-f

Find file and read it.

find-file-other-frame

C-x 5 f

Find a file in a new frame.

find-file-other-window

C-x 4 f

Find a file in the other window.

forward-char

C-f

Move forward one character (right).

forward-page

C-x ]

Move forward one page.

forward-paragraph

M-}

Move forward one paragraph.

forward-sentence

M-e

Move forward one sentence.

forward-word

M-f

Move forward one word.

goto-char

(none)

Go to character n of file.

goto-line

(none)

Go to line n of file.

help-command

C-h

Enter the online help system.

help-with-tutorial

C-h t

Run the emacs tutorial.

indent-region

C-M-\

Indent a region to match first line in region.

indented-text-mode

(none)

Major mode: each tab defines a new indent for subsequent lines.

info

C-h i

Start the Info documentation reader.

insert-file

C-x i

Insert file at cursor position.

insert-keyboard-macro

(none)

Insert the macro you named into a file.

inverse-add-global-abbrev

C-x a i g

Type global abbreviation, then definition.

inverse-add-local-abbrev

C-x a i l

Type local abbreviation, then definition.

isearch-backward

C-r

Start incremental search backward.

isearch-backward-regexp

C-r

Same, but search for regular expression.

isearch-forward

C-s

Start incremental search forward.

isearch-forward-regexp

C-r

Same, but search for regular expression.

kbd-macro-query

C-x q

Insert a query in a macro definition.

keyboard-quit

C-g

Abort current command.

kill-all-abbrevs

(none)

Kill abbreviations for this session.

kill-buffer

C-x k

Delete the buffer specified.

kill-line

C-k

Delete from cursor to end of line.

kill-paragraph

(none)

Delete from cursor to end of paragraph.

kill-region

C-w

Delete a marked region.

kill-sentence

M-k

Delete sentence the cursor is on.

kill-some-buffers

(none)

Ask about deleting each buffer.

kill-word

M-d

Delete word the cursor is on.

list-abbrevs

(none)

View word abbreviations.

list-buffers

C-x C-b

Display buffer list.

load-file

(none)

Load macro files you've saved.

mark-page

C-x C-p

Mark page.

mark-paragraph

M-h

Mark paragraph.

mark-whole-buffer

C-x h

Mark buffer.

name-last-kbd-macro

(none)

Name last macro you created (before saving it).

negative-argument; capitalize-word

M- - M-c

Capitalize previous word.

negative-argument; downcase-word

M- - M-l

Lowercase previous word.

negative-argument; upcase-word

M- - M-u

Uppercase previous word.

next-line

C-n

Move to next line (down).

other-window

C-x o

Move to the other window.

previous-line

C-p

Move to previous line (up).

query-replace-regexp

C-M-%

Query-replace a regular expression.

recenter

C-l

Redraw screen, with current line in center.

rename-buffer

(none)

Change buffer name to specified name.

replace-regexp

(none)

Replace a regular expression unconditionally.

re-search-backward

(none)

Simple regular expression search backward.

re-search-forward

(none)

Simple regular expression search forward.

revert-buffer

(none)

Restore buffer to the state it was in when the file was last saved (or auto-saved).

save-buffer

C-x C-s

Save file (may hang terminal; use C-q to restart).

save-buffers-kill-emacs

C-x C-c

Exit emacs.

save-some-buffers

C-x s

Ask whether to save each modified buffer.

scroll-down

M-v

Move backward one screen.

scroll-left

C-x <

Scroll the window left.

scroll-other-window

C-M-v

Scroll other window.

scroll-right

C-x >

Scroll the window right.

scroll-up

C-v

Move forward one screen.

set-fill-prefix

C-x .

Use characters from the beginning of the line up to the cursor column as the "fill prefix." This prefix is prepended to each line in the paragraph. Cancel the prefix by typing this command in column 1.

set-mark-command

C-@ or C-Space

Mark the beginning (or end) of a region.

shell

(none)

Start a shell buffer.

shrink-window

(none)

Make window shorter.

shrink-window-horizontally

C-x {

Make window narrower.

spell-buffer

(none)

Check spelling of current buffer.

spell-region

(none)

Check spelling of current region.

spell-string

(none)

Check spelling of string typed in minibuffer.

spell-word

M-$

Check spelling of word after cursor.

split-line

C-M-o

Split line at cursor; indent to column of cursor.

split-window-vertically

C-x 2

Divide the current window into two, one on top of the other.

split-window-horizontally

C-x 3

Divide the current window into two, side by side.

start-kbd-macro

C-x (

Start macro definition.

suspend-emacs

C-z

Suspend emacs (use exit or fg to restart).

switch-to-buffer

C-x b

Move to the buffer specified.

switch-to-buffer-other-frame

C-x 5 b

Select a buffer in another frame.

switch-to-buffer-other-window

C-x 4 b

Select a buffer in the other window.

text-mode

(none)

Exit indented text mode; return to text mode.

transpose-chars

C-t

Transpose two letters.

transpose-lines

C-x C-t

Transpose two lines.

transpose-paragraphs

(none)

Transpose two paragraphs.

transpose-sentences

(none)

Transpose two sentences.

transpose-words

M-t

Transpose two words.

unexpand-abbrev

(none)

Undo the last word abbreviation.

universal-argument

C-u n

Repeat the next command n times.

universal-argument and start-kbd-macro

C-u C-x (

Execute last macro defined, then add keystrokes to it.

upcase-region

C-x C-u

Uppercase region.

upcase-word

M-u

Uppercase word.

view-emacs-news

C-h n

View news about updates to emacs.

view-lossage

C-h l

What are the last 100 characters I typed?

where-is

C-h w

What is the key binding for this command?

write-abbrev-file

(none)

Write the word abbreviation file.

write-file

C-x C-w

Write buffer contents to file.

yank

C-y

Restore what you've deleted.

Chapter 9. The vi, ex, and vim Editors

The vi and ex editors are the "standard" editors on Unix systems. You can count on there being some version of them, no matter what Unix flavor you are using. The two editors are in fact the same program; based on how the editor was invoked, it enters full-screen mode or line mode. vim is a popular extended version of vi.

This chapter presents the following topics:

Conceptual overview

Command-line syntax

Review of vi operations

Alphabetical list of keys in command mode

vi commands

vi configuration

ex basics

Alphabetical summary of ex commands

vi is pronounced "vee eye."

Besides the original Unix vi, there are a number of freely available vi clones (including vim). Both the original vi and the clones are covered in Learning the vi Editor, listed in the Bibliography. The Internet starting point for vim is http://www.vim.org.

Conceptual Overview

vi is the classic screen-editing program for Unix. A number of enhanced versions exist, including nvi, vim, vile, and elvis. On GNU/Linux systems, the vi command is usually one of these programs (either a copy or a link). The Emacs editor, covered in Chapter 8, has several vi modes that allow you to use many of the same commands covered in this chapter.

The vi editor operates in two modes, command mode and insert mode. The dual mode makes vi an attractive editor for users who separate text entry from editing. For users who edit as they type, the modeless editing of emacs can be more comfortable. However, vim supports both ways of editing, through the insertmode option and the evim command for invoking vim.

vi is based on an older line editor called ex. (ex, in turn, was developed by Bill Joy at the University of California, Berkeley, from the primordial Unix line editor, ed.) A user can invoke powerful editing capabilities within vi by typing a colon (:), entering an ex command, and pressing the ENTER key. Furthermore, you can place ex commands in a startup file called ~/.exrc, which vi reads at the beginning of your editing session. Because ex commands are such an important part of vi, they are also described in this chapter.

One of the most common versions of vi found on GNU/Linux systems is Bram Moolenaar's Vi IMproved, or vim. On some GNU/Linux distributions, vim is the default version of vi and runs when you invoke vi. vim offers many extra features, and optionally changes some of the basic features of vi, most notoriously changing the undo command to support multiple levels of undo.

Fully documenting vim is beyond the scope of this chapter, but we do cover some of its most commonly used options and features. Beyond what we cover here, vim offers enhanced support to programmers through an integrated build and debugging process, syntax highlighting, extended ctags support, and support for Perl and Python, as well as GUI fonts and menus, function key mapping, independent mapping for each mode, and more. Fortunately, vim comes with a powerful internal help system that you can use to learn more about the things that we just couldn't fit into this chapter. See http://www.vim.org/ for more information.

Command-Line Syntax

The three most common ways of starting a vi session are:

vi [options] file
vi [options] +num file
vi [options] +/pattern file

You can open file for editing, optionally at line num or at the first line matching pattern. If no file is specified, vi opens with an empty buffer.

Command-Line Options

Because vi and ex are the same program, they share the same options. However, some options only make sense for one version of the program. Options specific to vim are so marked.

+[ num ]

Start editing at line number num, or the last line of the file if num is omitted.

+/ pattern

Start editing at the first line matching pattern. (For ex, this fails if nowrapscan is set in your .exrc startup file, since ex starts editing at the last line of a file.)

-b

Edit the file in binary mode. {vim}

-c command

Run the given ex command upon startup. Only one -c option is permitted for vi; vim accepts up to 10. An older form of this option, + command, is still supported.

--cmd command

Like -c, but execute the command before any resource files are read. {vim}

-C

Solaris vi: Same as -x, but assume the file is encrypted already.

vim: Start the editor in vi-compatible mode.

-d

Run in diff mode. Works like vimdiff. (See vimdiff in Chapter 2.) {vim}

-D

Debugging mode for use with scripts. {vim}

-e

Run as ex (line editing rather than full-screen mode).

-h

Print help message, then exit. {vim}

-i file

Use the specified file instead of the default (~/.viminfo) to save or restore vim's state. {vim}

-l

Enter Lisp mode for running Lisp programs (not supported in all versions).

-L

List files that were saved due to an aborted editor session or system crash (not supported in all versions). For vim, this option is the same as -r.

-m

Start the editor with the write option turned off so that the user cannot write to files. {vim}

-M

Do not allow text in files to be modified. {vim}

-n

Do not use a swap file; record changes in memory only. {vim}

--noplugin

Do not load any plug-ins. {vim}

-N

Run vim in a non-vi-compatible mode. {vim}

-o [ num ]

Start vim with num open windows. The default is to open one window for each file. {vim}

-O [ num ]

Start vim with num open windows arranged horizontally (split vertically) on the screen. {vim}

-r [ file ]

Recovery mode; recover and resume editing on file after an aborted editor session or system crash. Without file, list files available for recovery.

-R

Edit files read-only.

-s

Silent; do not display prompts. Useful when running a script. This behavior also can be set through the older - option. For vim, only applies when used together with -e.

-s scriptfile

Read and execute commands given in the specified scriptfile as if they were typed in from the keyboard. {vim}

-S commandfile

Read and execute commands given in commandfile after loading any files for editing specified on the command line. Shorthand for vim -c 'source commandfile '. {vim}

-t tag

Edit the file containing tag and position the cursor at its definition. (See ctags in Chapter 2 for more information.)

-T type

Set the terminal type. This value overrides the $TERM environment variable. {vim}

-u file

Read configuration information from the specified resource file instead of default .vimrc resource file. If the file argument is NONE, vim will read no resource files, load no plug-ins, and run in compatible mode. If the argument is NORC, it will read no resource files but it will load plug-ins. {vim}

-v

Run in full-screen mode (default for vi).

--version

Print version information, then exit. {vim}

-V [ num ]

Verbose mode; print messages about what options are being set and what files are being read or written. You can set a level of verbosity to increase or decrease the number of messages received. The default value is 10 for high verbosity. {vim}

-w rows

Set the window size so rows lines at a time are displayed; useful when editing over a slow dial-up line (or long distance Internet connection). Older versions of vi do not permit a space between the option and its argument. vim does not support this option.

-W scriptfile

Write all typed commands from the current session to the specified scriptfile. The file created can be used with the -s command. {vim}

-x

Prompt for a key that will be used to try to encrypt or decrypt a file using crypt (not supported in all versions).[*]

-y

Modeless vi; run vim in insert mode only, without a command mode. This is the same as invoking vim as evim. (See evim in Chapter 2.) {vim}

-Z

Start vim in restricted mode. Do not allow shell commands or suspension of the editor. {vim}

While most people know ex commands only by their use within vi, the editor also exists as a separate program and can be invoked from the shell (for instance, to edit files as part of a script). Within ex, you can enter the vi or visual command to start vi. Similarly, within vi, you can enter Q to quit the vi editor and enter ex.

You can exit ex in several ways:

:x

Exit (save changes and quit).

:q!

Quit without saving changes.

:vi

Enter the vi editor.

[*] The crypt command's encryption is weak. Don't use it for serious secrets.

Review of vi Operations

This section provides a review of the following:

vi modes

Syntax of vi commands

Status-line commands

Command Mode

Once the file is opened, you are in command mode . From command mode, you can:

Invoke insert mode

Issue editing commands

Move the cursor to a different position in the file

Invoke ex commands

Invoke a Unix shell

Save the current version of the file

Exit vi

Insert Mode

In insert mode, you can enter new text in the file. You normally enter insert mode with the i command. Press the ESCAPE key to exit insert mode and return to command mode. The full list of commands that enter insert mode is provided later, in the section "Insert Commands."

Syntax of vi Commands

In vi, editing commands have the following general form:

[n] operator [m]motion

The basic editing operators are:

c

Begin a change.

d

Begin a deletion.

y

Begin a yank (or copy).

If the current line is the object of the operation, the motion is the same as the operator: cc, dd, yy. Otherwise, the editing operators act on objects specified by cursor-movement commands or pattern-matching commands. (For example, cf. changes up to the next period.) n and m are the number of times the operation is performed, or the number of objects the operation is performed on. If both n and m are specified, the effect is n × m.

An object of operation can be any of the following text blocks:

word

Includes characters up to a whitespace character (space or tab) or punctuation mark. A capitalized object is a variant form that recognizes only whitespace.

sentence

Up to ., !, or ?, followed by two spaces.

paragraph

Up to the next blank line or paragraph macro defined by the para= option.

section

Up to the next nroff/troff section heading defined by the sect= option.

motion

Up to the character or other text object as specified by a motion specifier, including pattern searches.

Examples

2cw

Change the next two words.

d}

Delete up to next paragraph.

d^

Delete back to beginning of line.

5yy

Copy the next five lines.

y]]

Copy up to the next section.

cG

Change to the end of the edit buffer.

More commands and examples may be found in the section "Changing and deleting text," later in this chapter.

Visual mode (vim only)

vim provides an additional facility, "visual mode ." This allows you to highlight blocks of text which then become the object of edit commands such as deletion or saving (yanking). Graphical versions of vim allow you to use the mouse to highlight text in a similar fashion. See the vim help file visual.txt for the full story.

v

Select text in visual mode one character at a time.

V

Select text in visual mode one line at a time.

CTRL-V

Select text in visual mode in blocks.

Status-Line Commands

Most commands are not echoed on the screen as you input them. However, the status line at the bottom of the screen is used to edit these commands:

/

Search forward for a pattern.

?

Search backward for a pattern.

:

Invoke an ex command.

!

Invoke a Unix command that takes as its input an object in the buffer and replaces it with output from the command. You type a motion command after the ! to describe what should passed to the Unix command. The command itself is entered on the status line.

Commands that are entered on the status line must be entered by pressing the ENTER key. In addition, error messages and output from the CTRL-G command are displayed on the status line.

vi Commands

vi supplies a large set of single-key commands when in command mode. vim supplies additional multikey commands.

Movement Commands

Some versions of vi do not recognize extended keyboard keys (e.g., arrow keys, Page Up, Page Down, Home, Insert, and Delete); some do. All, however, recognize the keys in this section. Many users of vi prefer to use these keys, as it helps them keep their fingers on the home row of the keyboard. A number preceding a command repeats the movement. Movement commands are also used after an operator. The operator works on the text that is moved.

Character

h, j, k, l

Left, down, up, right (←, ↓, ↑, →).

Spacebar

Right.

BACKSPACE

Left.

CTRL-H

Left.

Text

w, b

Forward, backward by "word" (letters, numbers, and underscore make up words).

W, B

Forward, backward by "WORD" (only whitespace separates items).

e

End of word.

E

End of WORD.

ge

End of previous word. {vim}

gE

End of previous WORD. {vim}

), (

Beginning of next, current sentence.

}, {

Beginning of next, current paragraph.

]], [[

Beginning of next, current section.

][, [ ]

End of next, current section. {vim}

Lines

Long lines in a file may show up on the screen as multiple lines. (They wrap around from one screen line to the next.) While most commands work on the lines as defined in the file, a few commands work on lines as they appear on the screen. The vim option wrap allows you to control how long lines are displayed.

0, $

First, last position of current line.

^, _

First nonblank character of current line.

+, -

First nonblank character of next, previous line.

ENTER

First nonblank character of next line.

num |

Column num of current line.

g0, g$

First, last position of screen line. {vim}

g^

First nonblank character of screen line. {vim}

gm

Middle of screen line. {vim}

gk, gj

Move up, down one screen line. {vim}

H

Top line of screen (Home position).

M

Middle line of screen.

L

Last line of screen.

num H

num lines after top line.

num L

num lines before last line.

Screens

CTRL-F, CTRL-B

Scroll forward, backward one screen.

CTRL-D, CTRL-U

Scroll down, up one-half screen.

CTRL-E, CTRL-Y

Show one more line at bottom, top of screen.

z ENTER

Reposition line with cursor to top of screen.

z.

Reposition line with cursor to middle of screen.

z-

Reposition line with cursor to bottom of screen.

CTRL-L

Redraw screen (without scrolling).

CTRL-R

vi: Redraw screen (without scrolling).

vim: Redo last undone change.

Searches

/ pattern

Search forward for pattern. End with ENTER.

/ pattern /+ num

Go to line num after pattern.

? pattern

Search backward for pattern. End with ENTER.

? pattern ?- num

Go to line num before pattern.

:noh

Suspend search highlighting until next search. {vim}.

n

Repeat previous search.

N

Repeat search in opposite direction.

/

Repeat previous search forward.

?

Repeat previous search backward.

*

Search forward for word under cursor. Matches only exact words. {vim}

#

Search backward for word under cursor. Matches only exact words. {vim}

g*

Search backward for word under cursor. Matches the characters of this word when embedded in a longer word. {vim}

g#

Search backward for word under cursor. Matches the characters of this word when embedded in a longer word. {vim}

%

Find match of current parenthesis, brace, or bracket.

f x

Move cursor forward to x on current line.

F x

Move cursor backward to x on current line.

t x

Move cursor forward to character before x in current line.

T x

Move cursor backward to character after x in current line.

,

Reverse search direction of last f, F, t, or T.

;

Repeat last f, F, t, or T.

Line numbering

CTRL-G

Display current line number.

gg

Move to first line in file. {vim}

num G

Move to line number num.

G

Move to last line in file.

: num

Move to line number num.

Marks

m x

Place mark x at current position.

' x

(backquote) Move cursor to mark x.

' x

(apostrophe) Move to start of line containing x.

''

(backquotes) Return to position before most recent jump.

''

(apostrophes) Like preceding, but return to start of line.

'"

(apostrophe quote) Move to position when last editing the file. {vim}

'[, ']

(backquote bracket) Move to beginning/end of previous text operation. {vim}

'[, ']

(apostrophe bracket) Like preceding, but return to start of line where operation occurred. {vim}

'.

(backquote period) Move to last change in file. {vim}

'.

(apostrophe period) Like preceding, but return to start of line. {vim}

'0

Position where you last exited vim. {vim}

:marks

List active marks. {vim}

Insert Commands

a

Append after cursor.

A

Append to end of line.

c

Begin change operation.

C

Change to end of line.

gI

Insert at beginning of line. {vim}

i

Insert before cursor.

I

Insert at beginning of line.

o

Open a line below cursor.

O

Open a line above cursor.

R

Begin overwriting text.

s

Substitute a character.

S

Substitute entire line.

ESC

Terminate insert mode.

The following commands work in insert mode.

BACKSPACE

Delete previous character.

DELETE

Delete current character.

TAB

Insert a tab.

CTRL-A

Repeat last insertion. {vim}

CTRL-D

Shift line left to previous shift width. {vim}

CTRL-E

Insert character found just below cursor. {vim}

CTRL-H

Delete previous character (same as Backspace).

CTRL-I

Insert a tab.

CTRL-K

Begin insertion of multi-keystroke character.

CTRL-N

Insert next completion of the pattern to the left of the cursor. {vim}

CTRL-P

Insert previous completion of the pattern to the left of the cursor. {vim}

CTRL-T

Shift line right to next shift width. {vim}

CTRL-U

Delete current line.

CTRL-V

Insert next character verbatim.

CTRL-W

Delete previous word.

CTRL-Y

Insert character found just above cursor. {vim}

CTRL-[

(ESCAPE) Terminate insert mode.

Some of the control characters listed in the previous table are set by stty. Your terminal settings may differ.

Edit Commands

Recall that c, d, and y are the basic editing operators.

Changing and deleting text

The following table is not exhaustive, but illustrates the most common operations.

cw

Change word.

cc

Change line.

c$

Change text from current position to end-of-line.

C

Same as c$.

dd

Delete current line.

num dd

Delete num lines.

d$

Delete text from current position to end-of-line.

D

Same as d$.

dw

Delete a word.

d}

Delete up to next paragraph.

d^

Delete back to beginning of line.

d/ pat

Delete up to first occurrence of pattern.

dn

Delete up to next occurrence of pattern.

df x

Delete up to and including x on current line.

dt x

Delete up to (but not including) x on current line.

dL

Delete up to last line on screen.

dG

Delete to end of file.

gqap

Reformat current paragraph to textwidth. {vim}

g~w

Switch case of word. {vim}

guw

Change word to lowercase. {vim}

gUw

Change word to uppercase. {vim}

p

Insert last deleted or yanked text after cursor.

gp

Same as p, but leave cursor at end of inserted text. {vim}

]p

Same as p, but match current indention. {vim}

[p

Same as P, but match current indention. {vim}

P

Insert last deleted or yanked text before cursor.

gP

Same as P, but leave cursor at end of inserted text. {vim}

r x

Replace character with x.

R text

Replace with new text (overwrite), beginning at cursor. ESCAPE ends replace mode.

s

Substitute character.

4s

Substitute four characters.

S

Substitute entire line.

u

Undo last change.

CTRL-R

Redo last change. {vim}

U

Restore current line.

x

Delete current cursor position.

X

Delete back one character.

5X

Delete previous five characters.

.

Repeat last change.

~

Reverse case and move cursor right.

CTRL-A

Increment number under cursor. {vim}

CTRL-X

Decrement number under cursor. {vim}

Copying and moving

Register names are the letters a-z. Uppercase names append text to the corresponding register.

Y

Copy current line.

yy

Copy current line.

" x yy

Copy current line to register x.

ye

Copy text to end of word.

yw

Like ye, but include the whitespace after the word.

y$

Copy rest of line.

" x dd

Delete current line into register x.

" x d

Delete into register x.

" x p

Put contents of register x.

y]]

Copy up to next section heading.

J

Join current line to next line.

gJ

Same as J, but without inserting a space. {vim}

:j

Same as J.

:j!

Same as gJ.

Saving and Exiting

Writing a file means overwriting the file with the current text.

ZZ

Quit vi , writing the file only if changes were made.

:x

Same as ZZ.

:wq

Write file and quit.

:w

Write file.

:w file

Save copy to file.

: n , m w file

Write lines n to m to new file.

: n , m w >> file

Append lines n to m to existing file.

:w!

Write file (overriding protection).

:w! file

Overwrite file with current text.

:w %. new

Write current buffer named file as file .new.

:q

Quit vi (fails if changes were made).

:q!

Quit vi (discarding edits).

Q

Quit vi and invoke ex.

:vi

Return to vi after Q command.

%

Replaced with current filename in editing commands.

#

Replaced with alternate filename in editing commands.

Accessing Multiple Files

:e file

Edit another file; current file becomes alternate.

:e!

Return to version of current file at time of last write.

:e + file

Begin editing at end of file.

:e + num file

Open file at line num.

:e #

Open to previous position in alternate file.

:ta tag

Edit file at location tag.

:n

Edit next file in the list of files.

:n!

Force next file.

:n files

Specify new list of files.

:rewind

Edit first file in the list.

CTRL-G

Show current file and line number.

:args

Display list of files to be edited.

:prev

Edit previous file in the list of files.

Window Commands (vim)

The following table lists common commands for controlling windows in vim. See also the split, vsplit, and resize commands in the later section "Alphabetical Summary of ex Commands." For brevity, control characters are marked in the following list by ^.

:new

Open a new window.

:new file

Open file in a new window.

:sp [file]

Split the current window. With file, edit that file in the new window.

:sv [file]

Same as :sp, but make new window read-only.

:sn [file]

Edit next file in file list in new window.

:vsp [file]

Like :sp, but split vertically instead of horizontally.

:clo

Close current window.

:hid

Hide current window, unless it is the only visible window.

:on

Make current window the only visible one.

:res num

Resize window to num lines.

:wa

Write all changed buffers to their files.

:qa

Close all buffers and exit.

^W s

Same as :sp.

^W n

Same as :new.

^W ^

Open new window with alternate (previously edited) file.

^W c

Same as :clo.

^W o

Same as :only.

^W j, ^W k

Move cursor to next/previous window.

^W p

Move cursor to previous window.

^W h, ^W l

Move cursor to window on left/right.

^W t, ^W b

Move cursor to window on top/bottom of screen.

^W K, ^W B

Move current window to top/bottom of screen.

^W H, ^W L

Move current window to far left/right of screen.

^W r, ^W R

Rotate windows down/up.

^W +, ^W -

Increase/decrease current window size.

^W =

Make all windows same height.

Interacting with the System

:r file

Read in contents of file after cursor.

:r ! command

Read in output from command after current line.

: num r ! command

Like above, but place after line num (0 for top of file).

:! command

Run command, then return.

! motion command

Send the text covered by motion to Unix command; replace with output.

: n , m ! command

Send lines n-m to command; replace with output.

num !! command

Send num lines to Unix command; replace with output.

:!!

Repeat last system command.

:sh

Create subshell; return to editor with EOF.

CTRL-Z

Suspend editor, resume with fg.

:so file

Read and execute ex commands from file.

Macros

:ab in out

Use in as abbreviation for out in insert mode.

:unab in

Remove abbreviation for in.

:ab

List abbreviations.

:map string sequence

Map characters string as sequence of commands. Use #1, #2, etc., for the function keys.

:unmap string

Remove map for characters string.

:map

List character strings that are mapped.

:map! string sequence

Map characters string to input mode sequence.

:unmap! string

Remove input mode map (you may need to quote the characters with CTRL-V).

:map!

List character strings that are mapped for input mode.

q x

Record typed characters into register specified by letter x. If letter is uppercase, append to register. {vim}

q

Stop recording. {vim}

@ x

Execute the register specified by letter x. Use @@ to repeat the last @ command.

In vi, the following characters are unused in command mode and can be mapped as user-defined commands:

Letters

g K q V v

Control keys

^A ^K ^O ^W ^X ^_ ^\

Symbols

_ * \ = #

Tip

The = is used by vi if Lisp mode is set. Different versions of vi may use some of these characters, so test them before using.

vim does not use ^K, ^_, _, or \.

Miscellaneous Commands

<

Shift text described by following motion command left by one shiftwidth. {vim}

>

Shift text described by following motion command right by one shiftwidth. {vim}

<<

Shift line left one shift width (default is eight spaces).

>>

Shift line right one shift width (default is eight spaces).

>}

Shift right to end of paragraph.

<%

Shift left until matching parenthesis, brace, or bracket. (Cursor must be on the matching symbol.)

==

Indent line in C-style, or using program specified in equalprg option. {vim}

g

Start many multiple character commands in vim.

K

Look up word under cursor in manpages (or program defined in keywordprg). {vim}

^O

Return to previous jump. {vim}

q

Record keystrokes. {vim}

^Q

Same as ^V. {vim} (On some terminals, resume data flow.)

^T

Return to the previous location in the tag stack. (Solaris vi and vim)

^]

Perform a tag lookup on the text under the cursor.

^\

Enter ex line-editing mode.

^^

(Caret key with CTRL key pressed) Return to previously edited file.

vi Configuration

This section describes the following:

The :set command

Options available with :set

Example .exrc file

The :set Command

The :set command allows you to specify options that change characteristics of your editing environment. Options may be put in the ~/.exrc file or set during a vi session.

The colon does not need to be typed if the command is put in .exrc:

:set x

Enable boolean option x, show value of other options.

:set no x

Disable option x.

:set x = value

Give value to option x.

:set

Show changed options.

:set all

Show all options.

:set x ?

Show value of option x.

Options Used by :set

Table 9-1 contains brief descriptions of the important set command options. In the first column, options are listed in alphabetical order; if the option can be abbreviated, that abbreviation is shown in parentheses. The second column shows the default setting. The last column describes what the option does, when enabled.

This table lists set options for the Solaris version of vi, with the addition of important vim options. Other versions of vi may have more or fewer or different options. See your local documentation, or use :set all to see the full list. Options that receive a value are marked with an =.

Table 9-1. :set options

Option

Default

Description

autoindent (ai)

noai

In insert mode, indent each line to the same level as the line above or below. Use with the shiftwidth option.

autoprint (ap)

ap

Display changes after each editor command. (For global replacement, display last replacement.)

autowrite (aw)

noaw

Automatically write (save) the file if changed before opening another file with a command such as :n or before giving a Unix command with :!.

background (bg)

Describe the background so the editor can choose appropriate highlighting colors. Default value of dark or light depends on the environment in which the editor is invoked. {vim}

backup (bk)

nobackup

Create a backup file when overwriting an existing file. {vim}

backupdir= (bdir)

.,~/tmp/,~/

Name directories in which to store backup files if possible. The list of directories is comma-separated and in order of preference. {vim}

beautify (bf)

nobf

Ignore all control characters during input (except tab, newline, or formfeed).

backupext= (bex)

~

String to append to filenames for backup files. {vim}

cindent (cin)

nocindent

In insert mode, indents each line relative to the one above it, as is appropriate for C or C++ code. {vim}

compatible (cp)

cp

Make vim behave more like vi. Default is nocp when a ~/.vimrc file is found. {vim}

directory (dir)

/tmp

Name of directory in which ex/vi stores buffer files. (Directory must be writable.) This can be a comma-separated list for vim.

edcompatible

noedcompatible

Remember the flags used with the most recent substitute command (global, confirming) and use them for the next substitute command. Despite the name, no version of ed actually does this.

equalprg= (ep)

Use the specified program for the = command. When the option is blank (the default), the key invokes the internal C indenting function or the value of the indentexpr option. {vim}

errorbells (eb)

errorbells

Sound bell when an error occurs.

exrc (ex)

noexrc

Allow the execution of .exrc files that reside outside the user's home directory.

flash (fp)

Flash the screen instead of ringing the bell.

formatprg= (fp)

The gq command invokes the named external program to format text. It calls internal formatting functions when this option is empty (the default). {vim}

gdefault (gd)

nogdefault

Set the g flag on for substitutions by default. {vim}

hardtabs= (ht)

8

Define boundaries for terminal hardware tabs.

hidden (hid)

nohidden

Hide buffers rather than unload them when they are abandoned. {vim}

hlsearch (hls)

hlsearch

Highlight all matches of most recent search pattern. Use :nohlsearch to remove highlighting. {vim}

history= (hi)

20

Number of ex commands to store in the history table. {vim}

ignorecase (ic)

noic

Disregard case during a search.

incsearch (is)

noincsearch

Highlight matches to a search pattern as it is typed. {vim}

lisp

nolisp

Insert indents in appropriate Lisp format. (, ), {, }, [ [, and ] ] are modified to have meaning for Lisp.

list

nolist

Print tabs as ^I; mark ends of lines with $. (Use list to tell if end character is a tab or a space.)

magic

magic

Wildcard characters . (dot), * (asterisk), and [ ] (brackets) have special meaning in patterns.

mesg

mesg

Permit system messages to display on terminal while editing in vi.

mousehide (mh)

mousehide

When characters are typed, hide the mouse pointer. {vim}

novice

nonovice

Require the use of long ex command names, such as copy or read.

number (nu)

nonu

Display line numbers on left of screen during editing session.

open

open

Allow entry to open or visual mode from ex. Although not in Solaris vi or vim, this option has traditionally been in vi, and may be in your version of vi.

optimize (opt)

noopt

Abolish carriage returns at the end of lines when printing multiple lines; speed output on dumb terminals when printing lines with leading whitespace (spaces or tabs).

paragraphs (para)

IPLPPPQPP LIpplpipnpbplpipbp

Define paragraph delimiters for movement by { or }. The pairs of characters in the value are the names of troff macros that begin paragraphs.

paste

nopaste

Change the defaults of various options to make pasting text into a terminal window work better. All options are returned to their original value when the paste option is reset. {vim}

prompt

prompt

Display the ex prompt ( : ) when vi 's Q command is given.

readonly (ro)

noro

Any writes (saves) of a file fail unless you use ! after the write (works with w, ZZ, or autowrite).

redraw (re)

vi redraws the screen whenever edits are made. noredraw is useful at slow speeds on a dumb terminal: the screen isn't fully updated until you press ESCAPE. Default depends on line speed and terminal type.

remap

remap

Allow nested map sequences.

report=

5

Display a message on the status line whenever you make an edit that affects at least a certain number of lines. For example, 6dd reports the message "6 lines deleted."

ruler (ru)

ruler

Show line and column numbers for the current cursor position. {vim}

scroll=

[¹/₂ window]

Number of lines to scroll with ^D and ^U commands.

sections= (sect)

NHSHH HUuhsh+c

Define section delimiters for [ [ and ] ] movement. The pairs of characters in the value are the names of troff macros that begin sections.

shell= (sh)

/bin/sh

Pathname of shell used for shell escape (:!) and shell command (:sh). Default value is derived from shell environment, which varies on different systems.

shiftwidth= (sw)

8

Define number of spaces used when the indent is increased or decreased.

showmatch (sm)

nosm

In vi, when ) or } is entered, cursor moves briefly to matching ( or {. (If no match, rings the error message bell.) Very useful for programming.

showmode

noshowmode

In insert mode, display a message on the prompt line indicating the type of insert you are making. For example, "OPEN MODE" or "APPEND MODE."

slowopen (slow)

Hold off display during insert. Default depends on line speed and terminal type.

smartcase (scs)

nosmartcase

Override the ignorecase option when a search pattern contains uppercase characters. {vim}

tabstop= (ts)

8

Define number of spaces a tab indents during editing session. (Printer still uses system tab of 8.)

taglength= (tl)

0

Define number of characters that are significant for tags. Default (zero) means that all characters are significant.

tags=

tags /usr/lib/tags

Define pathname of files containing tags. (See the Unix ctags command.) (By default, vi searches the file tags in the current directory and /usr/lib/tags.)

tagstack

tagstack

Enable stacking of tag locations on a stack. (Solaris vi and vim.)

term=

Set terminal type.

terse

noterse

Display shorter error messages.

textwidth= (tw)

0

The maximum width of text to be inserted; longer lines are broken after whitespace. Default (zero) disables this feature, in which case wrapmargin is used. {vim}

timeout (to)

timeout

Keyboard maps time out after 1 second.[*]

timeoutlen= (tm)

1000

Number of milliseconds after which keyboard maps time out. Default value of 1000 provides traditional vi behavior. {vim}

ttytype=

Set terminal type. This is just another name for term.

undolevels= (ul)

1000

Number of changes that can be undone. {vim}

warn

warn

Display the warning message, "No write since last change."

window (w)

Show a certain number of lines of the file on the screen. Default depends on line speed and terminal type.

wrap

wrap

When on, long lines wrap on the screen. When off, only the first part of the line is displayed. {vim}

wrapmargin (wm)

0

Define right margin. If greater than zero, vi automatically inserts carriage returns to break lines.

wrapscan (ws)

ws

Searches wrap around either end of file.

writeany (wa)

nowa

Allow saving to any file.

writebackup (wb)

wb

Back up files before attempting to overwrite them. Remove the backup when the file has been successfully written, unless the backup option is set. {vim}

[*] When you have mappings of several keys (for example , :map zzz 3dw), you probably want to use notimeout. Otherwise, you need to type zzz within one second. When you have an insert mode mapping for a cursor key (for example, :map! ^[OB ^[ja), you should use timeout. Otherwise, vi won't react to ESCAPE until you type another key.

Example .exrc File

In an ex script file, comments start with the double-quote character. The following lines of code are an example of a customized .exrc file:

set nowrapscan                    " Searches don't wrap at end of file
set wrapmargin=7                  " Wrap text at 7 columns from right margin
set sections=SeAhBhChDh nomesg    " Set troff macros, disallow message
map q :w^M:n^M                    " Alias to move to next file
map v dwElp                       " Move a word
ab ORA O'Reilly Media, Inc.       " Input shortcut

Tip

The q alias isn't needed for vim, which has the :wn command. The v alias would hide the vim command v, which enters character-at-a-time visual mode operation.

ex Basics

The ex line editor serves as the foundation for the screen editor vi. Commands in ex work on the current line or on a range of lines in a file. Most often, you use ex from within vi. In vi, ex commands are preceded by a colon and entered by pressing ENTER.

You can also invoke ex on its own—from the command line—just as you would invoke vi. (You could execute an ex script this way.) Or you can use the vi command Q to quit the vi editor and enter ex.

Syntax of ex Commands

To enter an ex command from vi, type:

:[address] command [options]

An initial : indicates an ex command. As you type the command, it is echoed on the status line. Execute the command by pressing the ENTER key. address is the line number or range of lines that are the object of command. options and addresses are described below. ex commands are described in the section "Alphabetical Summary of ex Commands."

You can exit ex in several ways:

:x

Exit (save changes and quit).

:q!

Quit without saving changes.

:vi

Switch to the vi editor on the current file.

Addresses

If no address is given, the current line is the object of the command. If the address specifies a range of lines, the format is:

x,y

where x and y are the first and last addressed lines (x must precede y in the buffer). x and y may each be a line number or a symbol. Using ; instead of , sets the current line to x before interpreting y. The notation 1,$ addresses all lines in the file, as does %.

Address Symbols

1,$

All lines in the file.

x , y

Lines x through y.

x ; y

Lines x through y, with current line reset to x.

0

Top of file.

.

Current line.

num

Absolute line number num.

$

Last line.

%

All lines; same as 1,$.

x - n

n lines before x.

x + n

n lines after x.

-[num]

One or num lines previous.

+[num]

One or num lines ahead.

' x

Line marked with x.

''

Previous mark.

/ pattern /

Forward to line matching pattern.

? pattern ?

Backward to line matching pattern.

See Chapter 7 for more information on using patterns.

Options

!

Indicates a variant form of the command, overriding the normal behavior. The ! must come immediately after the command.

count

The number of times the command is to be repeated. Unlike in vi commands, count cannot precede the command, because a number preceding an ex command is treated as a line address. For example, d3 deletes three lines beginning with the current line; 3d deletes line 3.

file

The name of a file that is affected by the command. % stands for the current file; # stands for the previous file.

Alphabetical Summary of ex Commands

ex commands can be entered by specifying any unique abbreviation. In this listing, the full name appears in the margin, and the shortest possible abbreviation is used in the syntax line. Examples are assumed to be typed from vi, so they include the : prompt.

Name

abbreviate

Synopsis

ab [string text]

Define string when typed to be translated into text. If string and text are not specified, list all current abbreviations.

Examples

Note: ^M appears when you type ^V followed by ENTER.

:ab ora O'Reilly Media, Inc.
:ab id Name:^MRank:^MPhone:

Name

append

Synopsis

[address] a[!]
text.

Append new text at specified address, or at present address if none is specified. Add a ! to toggle the autoindent setting that is used during input. That is, if autoindent was enabled, ! disables it. Enter new text after entering the command. Terminate input of new text by entering a line consisting of just a period.

Example

:a                     Begin appending to current line
Append this line
and this line too.
.Terminate input of text to append

Name

args

Synopsis

ar
args file ...

Print the members of the argument list (files named on the command line), with the current argument printed in brackets ([ ]).

The second syntax is for vim, which allows you to reset the list of files to be edited.

Name

bdelete

Synopsis

[num] bd[!] [num]

Unload buffer num and remove it from the buffer list. Add a ! to force removal of an unsaved buffer. The buffer may also be specified by filename. If no buffer is specified, remove the current buffer. {vim}

Name

buffer

Synopsis

[num] b[!] [num]

Begin editing buffer num in the buffer list. Add a ! to force a switch from an unsaved buffer. The buffer may also be specified by filename. If no buffer is specified, continue editing the current buffer. {vim}

Name

buffers

Synopsis

buffers[!]

Print the members of the buffer list. Some buffers (e.g., deleted buffers) will not be listed. Add ! to show unlisted buffers. ls is another abbreviation for this command. {vim}

Name

cd

Synopsis

cd dirchdirdir

Change current directory within the editor to dir.

Name

center

Synopsis

[address] ce [width]

Center line within the specified width. If width is not specified, use textwidth. {vim}

Name

change

Synopsis

[address] c[!]
text.

Replace the specified lines with text. Add a ! to switch the autoindent setting during input of text. Terminate input by entering a line consisting of just a period.

Name

close

Synopsis

clo[!]

Close current window unless it is the last window. If buffer in window is not open in another window, unload it from memory. This command will not close a buffer with unsaved changes, but you may add ! to hide it instead. {vim}

Name

copy

Synopsis

[address] codestination

Copy the lines included in address to the specified destination address. The command t (short for "to") is a synonym for copy.

Example

:1,10 co 50     Copy first 10 lines to just after line 50

Name

delete

Synopsis

[address] d [register]

Delete the lines included in address. If register is specified, save or append the text to the named register. Register names are the lowercase letters a-z. Uppercase names append text to the corresponding register.

Examples

:/Part I/,/Part II/-1d  Delete to line above "Part II"
:/main/+d               Delete line below "main"
:.,$d x                 Delete from this line to last line into
register x

Name

edit

Synopsis

e[!] [+num] [filename]

Begin editing on filename. If no filename is given, start over with a copy of the current file. Add a ! to edit the new file even if the current file has not been saved since the last change. With the + num argument, begin editing on line num. Or num may be a pattern, of the form / pattern.

Examples

:e file             Edit file in current editing buffer
:e +/^Index #       Edit alternate file at pattern match
:e!Start over again on current file

Name

file

Synopsis

f [filename]

Change the filename for the current buffer to filename. The next time the buffer is written, it will be written to file filename. When the name is changed, the buffer's "not edited" flag is set, to indicate you are not editing an existing file. If the new filename is the same as a file that already exists on the disk, you will need to use :w! to overwrite the existing file. When specifying a filename, the % character can be used to indicate the current filename. A # can be used to indicate the alternate filename. If no filename is specified, print the current name and status of the buffer.

Example

:f %.new

Name

fold

Synopsis

address fo

Fold the lines specified by address. A fold collapses several lines on the screen into one line, which can later be unfolded. It doesn't affect the text of the file. {vim}

Name

foldclose

Synopsis

[address] foldc[!]

Close folds in specified address, or at present address if none is specified. Add a ! to close more than one level of folds. {vim}

Name

foldopen

Synopsis

[address] foldo[!]

Open folds in specified address, or at present address if none is specified. Add a ! to open more than one level of folds. {vim}

Name

global

Synopsis

[address] g[!]/pattern/[commands]

Execute commands on all lines that contain pattern or, if address is specified, on all lines within that range. If commands are not specified, print all such lines. Add a ! to execute commands on all lines not containing pattern. See also v.

Examples

:g/Unix/p               Print all lines containing "Unix"
:g/Name:/s/tom/Tom/     Change "tom" to "Tom" on all lines                                                 containing "Name:"

Name

hide

Synopsis

hid

Close current window unless it is the last window, but do not remove the buffer from memory. This is a safe command to use on an unsaved buffer. {vim}

Name

insert

Synopsis

[address] i[!]
text.

Insert text at line before the specified address, or at present address if none is specified. Add a ! to switch the autoindent setting during input of text. Terminate input of new text by entering a line consisting of just a period.

Name

join

Synopsis

[address] j[!] [count]

Place the text in the specified range on one line, with whitespace adjusted to provide two space characters after a period (.), no space characters before a ), and one space character otherwise. Add a ! to prevent whitespace adjustment.

Example

:1,5j!                Join first five lines, preserving whitespace

Name

jumps

Synopsis

ju

Print jump list used with CTRL-I and CTRL-O commands. The jump list is a record of most movement commands that skip over multiple lines. It records the position of the cursor before each jump. {vim}

Name

k

Synopsis

[address] kchar

Same as mark; see mark, later in this list.

Name

left

Synopsis

[address] le [count]

Left-align lines specified by address, or current line if no address is specified. Indent lines by count spaces. {vim}

Name

list

Synopsis

[address] l [count]

Print the specified lines so that tabs display as ^I, and the ends of lines display as $. l is like a temporary version of :set list.

Name

map

Synopsis

map[!] [string commands]

Define a keyboard macro named string as the specified sequence of commands. string is usually a single character, or the sequence # num, representing a function key on the keyboard. Use a ! to create a macro for input mode. With no arguments, list the currently defined macros.

Examples

:map K dwwP        Transpose two words
:map q :w^M:n^M    Write current file; go to next
:map! + ^[bi(^[ea)Enclose previous word in parentheses

Tip

vim has K and q commands, which the above aliases would hide.

Name

mark

Synopsis

[address] machar

Mark the specified line with char, a single lowercase letter. Return later to the line with 'x (where x is the same as char). vim also uses uppercase and numeric characters for marks. Lowercase letters work the same as in vi. Uppercase letters are associated with filenames and can be used between multiple files. Numbered marks, however, are maintained in a special viminfo file and cannot be set using this command. Same as k.

Name

marks

Synopsis

marks [chars]

Print list of marks specified by chars, or all current marks if no chars specified. {vim}

Example

:marks abc     Print marks a, b, and c

Name

mkexrc

Synopsis

mk[!] file

Create an .exrc file containing set commands for changed ex options and key mappings. This saves the current option settings, allowing you to restore them later.

Name

move

Synopsis

[address] mdestination

Move the lines specified by address to the destination address.

Example

:.,/Note/m /END/    Move text block to after line containing "END"

Name

new

Synopsis

[count] new

Create a new window count lines high with an empty buffer. {vim}

Name

next

Synopsis

n[!] [[+num] filelist]

Edit the next file from the command-line argument list. Use args to list these files. If filelist is provided, replace the current argument list with filelist and begin editing on the first file. With the + num argument, begin editing on line num. Or num may be a pattern, of the form / pattern.

Example

:n chap*            Start editing all "chapter" files

Name

nohlsearch

Synopsis

noh

Temporarily stop highlighting all matches to a search when using the hlsearch option. Highlighting is resumed with the next search. {vim}

Name

number

Synopsis

[address] nu [count]

Print each line specified by address, preceded by its buffer line number. Use # as an alternate abbreviation for number. count specifies the number of lines to show, starting with address.

Name

only

Synopsis

on [!]

Make the current window be the only one on the screen. Windows open on modified buffers are not removed from the screen (hidden), unless you also use the ! character. {vim}

Name

open

Synopsis

[address] o [/pattern/]

Enter open mode (vi ) at the lines specified by address, or at the lines matching pattern. Exit open mode with Q. Open mode lets you use the regular vi commands, but only one line at a time. It can be useful on slow dialup lines (or on very distant Internet ssh connections).

Name

preserve

Synopsis

pre

Save the current editor buffer as though the system were about to crash.

Name

previous

Synopsis

prev[!]

Edit the previous file from the command-line argument list. {vim}

Name

print

Synopsis

[address] p [count]

Print the lines specified by address. count specifies the number of lines to print, starting with address. P is another abbreviation.

Example

:100;+5p                Show line 100 and the next 5 lines

Name

put

Synopsis

[address] pu [char]

Place previously deleted or yanked lines from named register specified by char, to the line specified by address. If char is not specified, the last deleted or yanked text is restored.

Name

qall

Synopsis

qa[!]

Close all windows and terminate current editing session. Use ! to discard changes made since the last save. {vim}

Name

quit

Synopsis

q[!]

Terminate current editing session. Use ! to discard changes made since the last save. If the editing session includes additional files in the argument list that were never accessed, quit by typing q! or by typing q twice. vim only closes the editing window if there are still other windows open on the screen.

Name

read

Synopsis

[address] rfilename

Copy the text of filename after the line specified by address. If filename is not specified, the current filename is used.

Example

:0r $HOME/data        Read file in at top of current file

Name

read

Synopsis

[address] r !command

Read the output of shell command into the text after the line specified by address.

Example

:$r !spell %        Place results of spell checking at end of file

Name

recover

Synopsis

rec [file]

Recover file from the system save area.

Name

redo

Synopsis

red

Restore last undone change. Same as CTRL-R. {vim}

Name

resize

Synopsis

res [[±]num]

Resize current window to be num lines high. If + or - is specified, increase or decrease the current window height by num lines. {vim}

Name

rewind

Synopsis

rew[!]

Rewind argument list and begin editing the first file in the list. Add a ! to rewind even if the current file has not been saved since the last change.

Name

right

Synopsis

[address] ri [width]

Right-align lines specified by address, or current line if no address is specified, to column width. Use textwidth option if no width is specified. {vim}

Name

sbnext

Synopsis

[count] sbn [count]

Split the current window and begin editing the count next buffer from the buffer list. If no count is specified, edit the next buffer in the buffer list. {vim}

Name

sbuffer

Synopsis

[num] sb [num]

Split the current window and begin editing buffer num from the buffer list in the new window. The buffer to be edited may also be specified by filename. If no buffer is specified, open the current buffer in the new window. {vim}

Name

set

Synopsis

se parameter1 parameter2 ...

Set a value to an option with each parameter, or, if no parameter is supplied, print all options that have been changed from their defaults. For boolean options, each parameter can be phrased as option or no option; other options can be assigned with the syntax option = value. Specify all to list current settings. The form set option ? displays the value of option. See the list of set options in the section "The :set Command," earlier in this chapter.

Examples

:set nows wm=10
:set all

Name

shell

Synopsis

sh

Create a new shell. Resume editing when the shell terminates.

Name

snext

Synopsis

[count] sn [[+num] filelist]

Split the current window and begin editing the next file from the command-line argument list. If count is provided, edit the count next file. If filelist is provided, replace the current argument list with filelist and begin editing the first file. With the +n argument, begin editing on line num. Alternately, num may be a pattern of the form /pattern. {vim}

Name

source

Synopsis

so file

Read (source) and execute ex commands from file.

Example

:so $HOME/.exrc

Name

split

Synopsis

[count] sp [+num] [filename]

Split the current window and load filename in the new window, or the same buffer in both windows if no file is specified. Make the new window count lines high, or if count is not specified, split the window into equal parts. With the +n argument, begin editing on line num. num may also be a pattern of the form /pattern. {vim}

Name

sprevious

Synopsis

[count] spr [+num]

Split the current window and begin editing the previous file from the command-line argument list in the new window. If count is specified, edit the count previous file. With the + num argument, begin editing on line num. num may also be a pattern of the form /pattern. {vim}

Name

stop

Synopsis

st

Suspend the editing session. Same as CTRL-Z. Use the shell fg command to resume the session.

Name

substitute

Synopsis

[address] s [/pattern/replacement/] [options] [count]

Replace the first instance of pattern on each of the specified lines with replacement. If pattern and replacement are omitted, repeat last substitution. count specifies the number of lines on which to substitute, starting with address. See additional examples in Chapter 7. (Spelling out the command name does not work in Solaris vi.)

Options

c

Prompt for confirmation before each change.

g

Substitute all instances of pattern on each line (global).

p

Print the last line on which a substitution was made.

Examples

:1,10s/yes/no/g              Substitute on first 10 lines
:%s/[Hh]ello/Hi/gc           Confirm global substitutions
:s/Fortran/\U&/ 3            Uppercase "Fortran" on next three
                                                                                 lines
:g/^[0-9][0-9]*/s//Line &:/  For every line beginning with one or
more digits, add "Line" and a colon

Name

suspend

Synopsis

su

Suspend the editing session. Same as CTRL-Z. Use the shell fg command to resume the session.

Name

sview

Synopsis

[count] sv [+num] [filename]

Same as the split command, but set the readonly option for the new buffer. {vim}

Name

t

Synopsis

[address] tdestination

Copy the lines included in address to the specified destination address. t is equivalent to copy.

Example

:%t$               Copy the file and add it to the end

Name

tag

Synopsis

[address] tatag

In the tags file, locate the file and line matching tag and start editing there.

Example

Run ctags, then switch to the file containing myfunction:

:!ctags *.c
:tag myfunction

Name

tags

Synopsis

tags

Print list of tags in the tag stack. {vim}

Name

unabbreviate

Synopsis

una word

Remove word from the list of abbreviations.

Name

undo

Synopsis

u

Reverse the changes made by the last editing command. In vi the undo command will undo itself, redoing what you undid. vim supports multiple levels of undo. Use redo to redo an undone change in vim.

Name

unhide

Synopsis

[count] unh

Split screen to show one window for each active buffer in the buffer list. If specified, limit the number of windows to count. {vim}

Name

unmap

Synopsis

unm[!] string

Remove string from the list of keyboard macros. Use ! to remove a macro for input mode.

Name

v

Synopsis

[address] v/pattern/[command]

Execute command on all lines not containing pattern. If command is not specified, print all such lines. v is equivalent to g!. See global.

Example

:v/#include/d        Delete all lines except "#include" lines

Name

version

Synopsis

ve

Print the editor's current version number and date of last change.

Name

view

Synopsis

vie[[+num] filename]

Same as edit, but set file to readonly. When executed in ex mode, return to normal or visual mode. {vim}

Name

visual

Synopsis

[address] vi [type] [count]

Enter visual mode (vi) at the line specified by address. Return to ex mode with Q. type can be one of -, ^, or . (see the z command). count specifies an initial window size.

Name

visual

Synopsis

vi [+ num]file

Begin editing file in visual mode (vi), optionally at line num.

Name

vsplit

Synopsis

[count] vs [+num] [filename]

Same as the split command, but split the screen vertically. The count argument can be used to specify a width for the new window. {vim}

Name

wall

Synopsis

wa[!]

Write all changed buffers with filenames. Add ! to force writing of any buffers marked readonly. {vim}

Name

wnext

Synopsis

[count] wn[!] [[+num] filename]

Write current buffer and open next file in argument list, or the count next file if specified. If filename is specified, edit it next. With the + num argument, begin editing on line num. num may also be a pattern of the form /pattern. {vim}

Name

write

Synopsis

[address] w[!] [[>>] file]

Write lines specified by address to file, or write full contents of buffer if address is not specified. If file is also omitted, save the contents of the buffer to the current filename. If >> file is used, append lines to the end of the specified file. Add a ! to force the editor to write over any current contents of file.

Examples

:1,10w name_list              Copy first 10 lines to file name_list
:50w >> name_listNow append line 50

Name

write

Synopsis

[address] w !command

Write lines specified by address to command.

Example

:1,66w !pr -h myfile | lp        Print first page of file

Name

wq

Synopsis

wq[!]

Write and quit the file in one action. The file is always written. The ! flag forces the editor to write over any current contents of file.

Name

wqall

Synopsis

wqa[!]

Write all changed buffers and quit the editor. Add ! to force writing of any buffers marked readonly. xall is another alias for this command. {vim}

Name

X

Synopsis

X

Prompt for an encryption key. This can be preferable to :set key as typing the key is not echoed to the console. To remove an encryption key, just reset the key option to an empty value. {vim}

Name

xit

Synopsis

x

Write the file if it was changed since the last write; then quit.

Name

yank

Synopsis

[address] y [char] [count]

Place lines specified by address in named register char. Register names are the lowercase letters a-z. Uppercase names append text to the corresponding register. If no char is given, place lines in the general register. count specifies the number of lines to yank, starting with address.

Example

:101,200 ya a        Copy lines 100–200 to register "a"

Name

z

Synopsis

[address] z [type] [count]

Print a window of text with the line specified by address at the top. count specifies the number of lines to be displayed.

Type

+

Place specified line at the top of the window (default).

-

Place specified line at the bottom of the window.

.

Place specified line in the center of the window.

^

Print the previous window.

=

Place specified line in the center of the window and leave the current line at this line.

Name

&

Synopsis

[address] & [options] [count]

Repeat the previous substitute (s) command. count specifies the number of lines on which to substitute, starting with address. options are the same as for the substitute command.

Examples

:s/Overdue/Paid/        Substitute once on current line
:g/Status/&Redo substitution on all "Status" lines

Name

@

Synopsis

[address] @ [char]

Execute contents of register specified by char. If address is given, move cursor to the specified address first. If char is @, repeat the last @ command.

Name

=

Synopsis

[address] =

Print the line number of the line indicated by address. Default is line number of the last line.

Name

!

Synopsis

[address] !command

Execute Unix command in a shell. If address is specified, use the lines contained in address as standard input to command, and replace the lines with the output and error output. (This is called filtering the text through the command.)

Examples

:!ls                List files in the current directory
:11,20!sort -fSort lines 11–20 of current file

Name

< >

Synopsis

[address] < [count]
  or
[address] > [count]

Shift lines specified by address either left (<) or right (>). Only leading spaces and tabs are added or removed when shifting lines. count specifies the number of lines to shift, starting with address. The shiftwidth option controls the number of columns that are shifted. Repeating the < or > increases the shift amount. For example, :>>> shifts three times as much as :>.

Name

~

Synopsis

[address] ~ [count]

Replace the last used regular expression (even if from a search, and not from an s command) with the replacement pattern from the most recent s (substitute) command. This is rather obscure; see Chapter 6 of Learning the vi Editor for details.

Name

address

Synopsis

              address

Print the lines specified in address.

Name

ENTER

Synopsis

Print the next line in the file. (For ex only, not from the : prompt in vi.)

Chapter 10. The sed Editor

The sed "stream editor" is one of the most prominent Unix text processing tools. It is most often used for performing simple substitutions on data streams going through pipelines, but sed scripts can be written to do much more.

This chapter presents the following topics:

Conceptual overview of sed

Command-line syntax

Syntax of sed commands

Group summary of sed commands

Alphabetical summary of sed commands

Source code for GNU sed is available from ftp://ftp.gnu.org/gnu/sed/. The Free Software Foundation's home page for sed is http://www.gnu.org/software/sed/sed.html. For more information on sed, see sed & awk, listed in the Bibliography.

Conceptual Overview

The stream editor, sed, is a noninteractive editor. It interprets a script and performs the actions in the script. sed is stream-oriented because, like many Unix programs, input flows through the program and is directed to standard output. For example, sort is stream-oriented; vi is not. sed's input typically comes from a file or pipe but it can also be taken from the keyboard. Output goes to the screen by default but can be captured in a file or sent through a pipe instead. GNU sed can edit files that use multibyte character sets.

Typical Uses of sed

Editing one or more files automatically.

Simplifying repetitive edits to multiple files.

Writing conversion programs.

sed Operation

sed operates as follows:

Each line of input is copied into a "pattern space," an internal buffer where editing operations are performed.

All editing commands in a sed script are applied, in order, to each line of input.

Editing commands are applied to all lines (globally) unless line addressing restricts the lines affected.

If a command changes the input, subsequent commands and address tests are applied to the current line in the pattern space, not the original input line.

The original input file is unchanged because the editing commands modify an in-memory copy of each original input line. The copy is sent to standard output (but can be redirected to a file).

sed also maintains the "hold space," a separate buffer that can be used to save data for later retrieval.

Command-Line Syntax

The syntax for invoking sed has two forms:

    sed [-n] [-e] 'command' file(s)
    sed [-n]  -fscriptfile file(s)

The first form allows you to specify an editing command on the command line, surrounded by single quotes. The second form allows you to specify a scriptfile, a file containing sed commands. Both forms may be used together, and they may be used multiple times. If no file (s) is specified, sed reads from standard input.

Standard Options

The following options are recognized:

-n

Suppress the default output; sed displays only those lines specified with the p command or with the p flag of the s command.

-e cmd

Next argument is an editing command. Necessary if multiple scripts or commands are specified.

-f file

Next argument is a file containing editing commands.

If the first line of the script is #n, sed behaves as if -n had been specified.

Multiple -e and -f options may be provided, and they may be mixed. The final script consists of the concatenation of all the script and file arguments.

GNU sed Options

GNU sed accepts a number of additional command-line options, as well as long-option equivalents for the standard options. The GNU sed options are:

-ecmd, --expressioncmd

Use cmd as editing commands.

-ffile, --filefile

Obtain editing commands from file.

--help

Print a usage message and exit.

-i[suffix], --in-place[=suffix]

Edit files in place, overwriting the original file. If optional suffix is supplied, use it for renaming the original file as a backup file. See the GNU sed online Info documentation for the details.

-llen, --line-lengthlen

Set the line length for the l command to len characters.

-n, --quiet, --silent

Suppress the default output; sed displays only those lines specified with the p command or with the p flag of the s command.

--posix

Disable all GNU extensions. Setting POSIXLY_CORRECT in the environment merely disables those extensions that are incompatible with the POSIX standard.

-r, --regex-extended

Use Extended Regular Expressions instead of Basic Regular Expressions. See Chapter 7 for more information.

-s, --separate

Instead of considering the input to be one long stream consisting of the concatenation of all the input files, treat each file separately. Line numbers start over with each file; the address $ refers to the last line of each file; files read by the R command are rewound; and range addresses (/x/,/y/) may not cross file boundaries.

-u, --unbuffered

Buffer input and output as little as possible. Useful for editing the output of tail -f when you don't want to wait for the output.

--version

Print the version of GNU sed and a copyright notice, and then exit.

Syntax of sed Commands

sed commands have the general form:

    [address [,address ]][!]command [arguments]

commands consist of a single letter or symbol; they are described later, by group and alphabetically. arguments include the label supplied to b or t, the filename supplied to r or w, and the substitution flags for s. addresses are described below.

Pattern Addressing

A sed command can specify zero, one, or two addresses. In POSIX sed, an address has one of the forms in the following table. Regular expressions are described in Chapter 7. Additionally, \n can be used to match any newline in the pattern space (resulting from the N command), but not the newline at the end of the pattern space.

Address

Meaning

/ pattern /

Lines that match pattern.

\; pattern ;

Like previous, but use semicolon as the delimiter instead of slash. Any character may be used. This is useful if pattern contains multiple slash characters.

N

Line number N.

$

The last input line.

If the command specifies:

Then the command is applied to:

No address

Each input line.

One address

Any line matching the address. Some commands accept only one address: a, i, r, q, and =.

Two comma-separated addresses

First matching line and all succeeding lines up to and including a line matching the second address.

An address followed by !

All lines that do not match the address.

GNU sed allows additional address forms:

Address

Meaning

/ pattern /i

Match pattern, ignoring case. I may be used instead of i.

/ pattern /m

Match pattern, allowing ^ and $ to match around an embedded newline. M may be used instead of m.

0,/ pattern /

Similar to 1,/ pattern /, but if line 1 matches pattern, it will end the range.

address ,+ N

Matches line matching address, and the N following lines.

address ~ incr

Matches line matching address, and every incr lines after it. For example, 42~3 matches 42, 45, 48, and so on.

Examples

Command

Action performed

s/xx/yy/g

Substitute on all lines (all occurrences).

/BSD/d

Delete lines containing BSD.

/^BEGIN/,/^END/p

Print between BEGIN and END, inclusive.

/SAVE/!d

Delete any line that doesn't contain SAVE.

/BEGIN/,/END/!s/xx/yy/g

Substitute on all lines, except between BEGIN and END.

Braces ({ }) are used in sed to nest one address inside another or to apply multiple commands at a single matched address.

    [/pattern/[,/pattern/]]{
    command1
                  command2
    }

The opening curly brace must end its line, and the closing curly brace must be on a line by itself. Be sure there are no spaces after the braces.

GNU sed Regular Expression Extensions

With the -r option, GNU sed uses Extended Regular Expressions instead of Basic Regular Expressions. (See Chapter 7 for more information.) However, even without -r, you can use additional escape sequences for more powerful text matching. The following escape sequences are valid only in regular expressions :

\b

Matches on a word boundary, where of the two surrounding characters (x \b y) one is a word-constituent character and the other is not.

\B

Matches on a nonword boundary, where both of the two surrounding characters (x \B y) are either word-constituent or not word-constituent.

\w

Matches any word-constituent character (i.e., a letter, digit, or underscore).

\W

Matches any non-word-constituent character (i.e., anything that is not a letter, digit, or underscore).

\'

Matches the beginning of the pattern space. This is different from ^ when the m modifier is used for a pattern or the s command.

\'

Matches the end of the pattern space. This is different from $ when the m modifier is used for a pattern or the s command.

The following escape sequences may be used anywhere.

\a

The ASCII BEL character.

\f

The ASCII formfeed character.

\n

The ASCII newline character.

\r

The ASCII carriage return character.

\v

The ASCII vertical tab character.

\d NN

The character whose ASCII decimal value is NN (version 4.0 and later).

\o NN

The character whose ASCII octal value is NN (version 4.0 and later).

\x NN

The character whose ASCII hexadecimal value is NN (version 4.0 and later).

Group Summary of sed Commands

In the lists that follow, the sed commands are grouped by function and are described tersely. Full descriptions, including syntax and examples, can be found in the following section, "Alphabetical Summary." Commands marked with a | are specific to GNU sed.

Basic Editing

a\

Append text after a line.

c\

Replace text (usually a text block).

i\

Insert text before a line.

d

Delete lines.

s

Make substitutions.

y

Translate characters (like Unix tr).

Line Information

=

Display line number of a line.

l

Display control characters in ASCII.

p

Display the line.

Input/Output Processing

e †

Execute commands.

n

Skip current line and go to the next line.

r

Read another file's contents into the output stream.

R †

Read one line from a file into the output.

w

Write input lines to another file.

W †

Write first line in pattern space to another file.

q

Quit the sed script (no further output).

Q †

Quit without printing the pattern space.

v †

Require a specific version of GNU sed to run the script.

Yanking and Putting

h

Copy into hold space; wipe out what's there.

H

Copy into hold space; append to what's there.

g

Get the hold space back; wipe out the destination line.

G

Get the hold space back; append to the pattern space.

x

Exchange contents of the hold and pattern spaces.

Branching Commands

b

Branch to label or to end of script.

t

Same as b, but branch only after substitution.

T †

Same as t, but branch only if no successful substitutions.

: label

Label branched to by t or b.

Multiline Input Processing

N

Read another line of input (creates embedded newline).

D

Delete up to the embedded newline.

P

Print up to the embedded newline.

Alphabetical Summary of sed Commands

GNU sed lets you use the filenames /dev/stdin, /dev/stdout, and /dev/stderr to refer to standard input, output, and error respectively for the r, R, w, and W commands and the w flag to the s command.

GNU-specific commands or extensions are noted with {G} in the command synopsis. When the GNU version allows a command to have two addresses, the command is performed for each input line within the range.

Name

#

Synopsis

#

Begin a comment in a sed script. Valid only as the first character of the first line. (Some versions, including GNU sed, allow comments anywhere, but it is better not to rely on this.) If the first line of the script is #n, sed behaves as if -n had been specified.

Name

:

Synopsis

:label

Label a line in the script for the transfer of control by b or t. According to POSIX, sed must support labels that are unique in the first eight characters. GNU sed has no limit, but some older versions only support up to seven characters.

Name

=

Synopsis

[/pattern/]=
[address1[,address2]]={G}

Write to standard output the line number of each line addressed by pattern.

Name

a

Synopsis

[address]a\
text[address1[,address2]]a \ {G}text

Append text following each line matched by address. If text goes over more than one line, newlines must be "hidden" by preceding them with a backslash. The text is terminated by the first newline that is not hidden in this way. The text is not available in the pattern space, and subsequent commands cannot be applied to it. The results of this command are sent to standard output when the list of editing commands is finished, regardless of what happens to the current line in the pattern space.

The GNU version accepts two addresses, and allows you to put the first line of text on the same line as the a command.

Example

$a\
    This goes after the last line in the file\
    (marked by $).  This text is escaped at the\
    end of each line, except for the last one.

Name

b

Synopsis

[address1[,address2]]b[label]

Unconditionally transfer control to : label elsewhere in script. That is, the command following the label is the next command applied to the current line. If no label is specified, control falls through to the end of the script, so no more commands are applied to the current line.

Example

# Ignore HTML tables; resume script after </table>:
    /<table/,/<\/table>/b

Name

c

Synopsis

[address1[,address2]]c\text

Replace (change) the lines selected by the address(es) with text. (See a for details on text.) When a range of lines is specified, all lines are replaced as a group by a single copy of text. The contents of the pattern space are, in effect, deleted and no subsequent editing commands can be applied to the pattern space (or to text).

Example

# Replace first 100 lines in a file:
    1,100c\
    \
    <First 100 names to be supplied>

Name

d

Synopsis

[address1[,address2]]d

Delete the addressed line (or lines) from the pattern space. Thus, the line is not passed to standard output. A new line of input is read, and editing resumes with the first command in the script.

Example

# Delete all empty lines, including lines with just whitespace:
/^[□
                     →]*$/d

Name

D

Synopsis

[address1[,address2]]D

Delete the first part (up to embedded newline) of a multiline pattern space created by the N command and resume editing with the first command in the script. If this command empties the pattern space, then a new line of input is read, as if the d command had been executed.

Example

# Strip multiple blank lines, leaving only one:
    /^$/{
    N
    /^\n$/D
    }

Name

e

Synopsis

[address1[,address2]]e [command]{G}

With command, execute the command and send the result to standard output. Without command, execute the contents of the pattern space as a command, and replace the pattern space with the results.

Name

g

Synopsis

[address1[,address2]]g

Paste the contents of the hold space (see h and H) back into the pattern space, wiping out the previous contents of the pattern space. The Example shows a simple way to copy lines.

Example

This script collects all lines containing the word Item: and copies them to a place marker later in the file. The place marker is overwritten:

/Item:/H
/<Replace this line with the item list>/g

Name

G

Synopsis

[address1[,address2]]G

Same as g, except that a newline and the hold space are pasted to the end of the pattern space instead of overwriting it. The Example shows a simple way to "cut and paste" lines.

Example

This script collects all lines containing the word Item: and moves them after a place marker later in the file. The original Item: lines are deleted.

    /Item:/{
    H
    d
    }
    /Summary of items:/G

Name

h

Synopsis

[address1[,address2]]h

Copy the pattern space into the hold space, a special temporary buffer. The previous contents of the hold space are obliterated. You can use h to save a line before editing it.

Example

# Edit a line; print the change; replay the original
    /Unix/{
    h
    s/.* Unix \(.*\) .*/\1:/
    p
    x
    }

Sample input:

    This describes the Unix ls command.
    This describes the Unix cp command.

Sample output:

    ls:
    This describes the Unix ls command.
    cp:
    This describes the Unix cp command.

Name

H

Synopsis

[address1[,address2]]H

Append a newline and then the contents of the pattern space to the contents of the hold space. Even if the hold space is empty, H still appends a newline. H is like an incremental copy. See the Examples under g and G.

Name

i

Synopsis

[address]i\
text
[address1[,address2]]i \ {G}text

Insert text before each line matched by address. (See a for details on text.)

The GNU version accepts two addresses, and allows you to put the first line of text on the same line as the i command.

Example

/Item 1/i\
The five items are listed below:

Name

l

Synopsis

[address1[,address2]]l
[address1[,address2]]l [len]{G}

List the contents of the pattern space, showing nonprinting characters as ASCII codes. Long lines are wrapped. With GNU sed, len is the character position at which to wrap long lines. A value of 0 means to never break lines.

Name

n

Synopsis

[address1[,address2]]n

Read the next line of input into pattern space. The current line is sent to standard output, and the next line becomes the current line. Control passes to the command following n instead of resuming at the top of the script.

Example

In DocBook/XML, titles follow section tags. Suppose you are using a convention where each opening section tag is on a line by itself, with the title on the following line. To print all the section titles, invoke this script with sed -n:

/<sect[1-4]/{
n
p
}

Name

N

Synopsis

[address1[,address2]]N

Append the next input line to contents of pattern space; the new line is separated from the previous contents of the pattern space by a newline. (This command is designed to allow pattern matches across two lines.) By using \n to match the embedded newline, you can match patterns across multiple lines. See the Example under D.

Examples

Like the Example in n, but print the section tag line as well as header title:

/<sect[1-4]/{
N
p
}

Join two lines (replace newline with space):

/<sect[1-4]/{
N
s/\n/ /
p
}

Name

p

Synopsis

[address1[,address2]]p

Print the addressed line(s). Note that this can result in duplicate output unless default output is suppressed by using #n or the -n command-line option. Typically used before commands that change control flow (d, n, b), which might prevent the current line from being output. See the Examples under h, n, and N.

Name

P

Synopsis

[address1[,address2]]P

Print first part (up to embedded newline) of multiline pattern space created by N command. Same as p if N has not been applied to a line.

Example

Suppose you have function references in two formats:

function(arg1, arg2)
function(arg1,
         arg2)

The following script changes argument arg2, regardless of whether it appears on the same line as the function name:

s/function(arg1, arg2)/function(arg1, XX)/
/function(/{
N
s/arg2/XX/
P
D
}

Name

q

Synopsis

[address]q
[address]q [value]{G}

Quit when address is encountered. The addressed line is first written to the output (if default output is not suppressed), along with any text appended to it by previous a or r commands. GNU sed allows you to provide value, which is used as the exit status.

Examples

Delete everything after the addressed line:

/Garbled text follows:/q

Print only the first 50 lines of a file:

50q

Name

Q

Synopsis

[address]Q [value]{G}

Quits processing, but without printing the pattern space. If value is provided, it is used as sed's exit status.

Name

r

Synopsis

[address]r file[address1[,address2]]r file{G}

Read contents of file and append to the output after the contents of the pattern space. There must be exactly one space between the r and the filename. The GNU version accepts two addresses.

Example

/The list of items follows:/r item_file

Name

R

Synopsis

[address1[,address2]]R file{G}

Read one line of file and append to the output after the contents of the pattern space. Successive R commands read successive lines from file.

Name

s

Synopsis

[address1[,address2]]s/pattern/replacement/[flags]

Substitute replacement for pattern on each addressed line. If pattern addresses are used, the pattern // represents the last pattern address specified. Any delimiter may be used. Use \ within pattern or replacement to escape the delimiter. The following flags can be specified (those marked with a † are specific to GNU sed ):

n

Replace n th instance of pattern on each addressed line. n is any number in the range 1 to 512, and the default is 1.

e †

If the substitution was made, execute the contents of the pattern space as a shell command and replace the pattern space with the results.

g

Replace all instances of pattern on each addressed line, not just the first instance.

i or I †

Do a case-insensitive regular expression match.

m or M †

Allow ^ and $ to match around a newline embedded in the pattern space.

p

Print the line if the substitution is successful. If several successive substitutions are successful, sed prints multiple copies of the line.

w file

Write the line to file if a replacement was done. In Unix sed, a maximum of 10 different files can be opened.

GNU sed allows you to use the special filenames /dev/stdout and /dev/stderr to write to standard output or standard error, respectively.

Within the replacement, GNU sed accepts special escape sequences, with the following meanings:

\L

Lowercase the replacement text until a terminating \E or \U.

\l

Lowercase the following character only.

\U

Uppercase the replacement text until a terminating \E or \L.

\u

Uppercase the following character only.

\E

Terminate case conversion from \L or \U.

Examples

Here are some short, commented scripts:

    # Change third and fourth quote to ( and ):
    /function/{
    s/"/)/4
    s/"/(/3
    }

    # Remove all quotes on a given line:
    /Title/s/"//g

    # Remove first colon and all quotes; print resulting lines:
    s/://p
    s/"//gp

    # Change first "if" but leave "ifdef" alone:
    /ifdef/!s/if/   if/

Name

t

Synopsis

[address1[,address2]]t [label]

Test if successful substitutions have been made on addressed lines, and if so, branch to the line marked by : label. (See b and :.) If label is not specified, control branches to the bottom of the script. The t command is like a case statement in the C programming language or the various shell programming languages. You test each case; when it's true, you exit the construct.

Example

Suppose you want to fill empty fields of a database. You have this:

    ID: 1   Name: greg   Rate: 45
    ID: 2   Name: dale
    ID: 3

You want this:

    ID: 1   Name: greg   Rate: 45   Phone: ??
    ID: 2   Name: dale   Rate: ??   Phone: ??
    ID: 3   Name: ????   Rate: ??   Phone: ??

You need to test the number of fields already there. Here's the script (fields are tab-separated):

    #n
    /ID/{
    s/ID: .* Name: .* Rate: .*/&   Phone: ??/p
    t
    s/ID: .* Name: .*/&   Rate: ??   Phone: ??/p
    t
    s/ID: .*/&   Name: ????   Rate: ??   Phone: ??/p
    }

Name

T

Synopsis

[address1[,address2]]T [label]{G}

Like t, but only branches to label if there were not any successful substitutions. (See b, t, and :.) If label is not specified, control branches to the bottom of the script.

Name

v

Synopsis

[address1[,address2]]v [version]{G}

This command doesn't do anything. You use it to require GNU sed for your script. This works, since non-GNU versions of sed don't implement the command at all, and will therefore fail. If you supply a specific version, then GNU sed fails if the required version is newer than the one executing the script.

Name

w

Synopsis

[address1[,address2]]wfile

Append contents of pattern space to file. This action occurs when the command is encountered rather than when the pattern space is output. Exactly one space must separate the w and the filename. This command creates the file if it does not exist; if the file exists, its contents are overwritten each time the script is executed. Multiple write commands that direct output to the same file append to the end of the file.

Most Unix versions of sed allow a maximum of only 10 different files to be opened in a script. The GNU version does not have this limit.

GNU sed allows you to use the special filenames /dev/stdout and /dev/stderr to write to standard output or standard error, respectively.

Example

# Store HTML tables in  a file
    /<table/,/<\/table>/w tables.html

Name

W

Synopsis

[address1[,address2]]Wfile

Like w, but only write the contents of the first line in the pattern space to the file.

Name

x

Synopsis

[address1[,address2]]x

Exchange the contents of the pattern space with the contents of the hold space. See h for an example.

Name

y

Synopsis

[address1[,address2]]y/abc/xyz/

Translate characters. Change every instance of a to x, b to y, c to z, etc.

Example

# Change item 1, 2, 3 to Item A, B, C ...
    /^item [1-9]/y/i123456789/IABCDEFGHI/

Chapter 11. The awk Programming Language

The awk programming language is often used for text and string manipulation within shell scripts, particularly when input data can be viewed as records and fields. However, it is also an elegant and capable programming language that allows you to accomplish a lot with very little work.

This chapter presents the following topics:

Conceptual overview

Command-line syntax

Patterns and actions

Built-in variables

Operators

Variables and array assignment

User-defined functions

gawk-specific facilities

Implementation limits

Group listing of awk functions and commands

Alphabetical summary of awk functions and commands

Source code

For more information, see sed & awk and Effective awk Programming, listed in the Bibliography.

Conceptual Overview

awk is a pattern-matching program for processing files, especially when each line has a simple field-oriented layout. The new version of awk, called nawk, provides additional capabilities.[*] Every modern Unix system comes with a version of new awk, and its use is recommended over old awk. The GNU version of awk, called gawk, implements new awk and provides a number of additional features.

Different systems vary in what new and old awk are called. Some have oawk and awk, for the old and new versions, respectively. Others have awk and nawk. Still others only have awk, which is the new version. This example shows what happens if your awk is the old one:

    $ awk 1 /dev/null
    awk: syntax error near line 1
    awk: bailing out near line 1

awk will exit silently if it is the new version.

The POSIX standard for awk is based on new awk, and the standard uses the simple designation awk for that language. Thus, we do also. If your system's awk is the old one, find the new one, and use it for your programs.

Tip

Solaris is the only modern Unix system that persists in having old awk as the default version. You should be sure to put /usr/xpg4/bin in your shell's search path before /usr/bin, so that you will get a POSIX-compliant version of awk. Alternatively, just install the GNU version.

Items described here as "common extensions" are often available in different versions of new awk, as well as in gawk, but should not be used if strict portability of your programs is important to you.

The freely available versions of awk described in the section "Source Code," later in this chapter, all implement new awk.

With awk, you can:

Think of a text file as made up of records and fields in a textual database.

Perform arithmetic and string operations.

Use programming constructs such as loops and conditionals.

Produce formatted reports.

Define your own functions.

Execute Unix commands from a script.

Process the results of Unix commands.

Process command-line arguments gracefully.

Work easily with multiple input streams.

Flush open output files and pipes (with the latest Bell Laboratories version of awk).

In addition, with GNU awk (gawk), you can:

Use regular expressions to separate records, as well as fields.

Skip to the start of the next file, not just the next record.

Perform more powerful string substitutions.

Sort arrays.

Retrieve and format system time values.

Use octal and hexadecimal constants in your program.

Do bit manipulation.

Internationalize your awk programs, allowing strings to be translated into a local language at runtime.

Perform two-way I/O to a coprocess.

Open a two-way TCP/IP connection to a socket.

Dynamically add built-in functions.

Profile your awk programs.

[*] It really isn't so new. The additional features were added in 1984, and it was first shipped with System V Release 3.1 in 1987.

Command-Line Syntax

The syntax for invoking awk has two forms:

    awk  [options]  'script'  var=value  file(s)
    awk  [options]  -f scriptfile  var=value  file(s)

You can specify a script directly on the command line, or you can store a script in a scriptfile and specify it with -f. POSIX awk allows multiple -f scripts. Variables can be assigned a value on the command line. The value can be a string or numeric constant, a shell variable ($ name), or a command substitution (' cmd '), but the value is available only after the BEGIN statement is executed.

awk operates on one or more files. If none are specified (or if - is specified), awk reads from the standard input.

Standard Options

The standard options are:

-F fs

Set the field separator to fs. This is the same as setting the built-in variable FS. POSIX awk allows fs to be a regular expression. Each input line, or record, is divided into fields by white space (spaces or TABs) or by some other user-definable field separator. Fields are referred to by the variables $1, $2,..., $ n. $0 refers to the entire record.

-v var = value

Assign a value to variable var. This allows assignment before the script begins execution.

For example, to print the first three (colon-separated) fields of each record on separate lines:

    awk -F: '{ print $1; print $2; print $3 }' /etc/passwd

Many examples are shown later in the section "Simple Pattern-Action Examples."

Important gawk Options

Besides the standard command-line options, gawk has a large number of additional options. This section lists those that are of most value in day-to-day use. Any unique abbreviation of these options is acceptable.

--dump-variables[ = file ]

When the program has finished running, print a sorted list of global variables and their types and final values to file. The default file is awkvars.out.

--gen-po

Read the awk program and print all strings marked as translatable to standard output in the form of a GNU gettext Portable Object file. See the later section "Internationalization," for more information.

--help

Print a usage message to standard error and exit.

--lint[ =fatal ]

Enable checking of nonportable or dubious constructs, both when the program is read, and as it runs. With an argument of fatal, lint warnings become fatal errors.

--non-decimal-data

Allow octal and hexadecimal data in the input to be recognized as such. This option is not recommended; use strtonum() in your program, instead.

--profile[ = file ]

With gawk, put a "prettyprinted" version of the program in file. Default is awkprof.out. With pgawk (see the "Profiling" section later in this chapter), put the profiled listing of the program in file.

--posix

Turn on strict POSIX compatibility, in which all common and gawk-specific extensions are disabled.

--source =' program text '

Use program text as the awk source code. Use this option with -f to mix command line programs with awk library files.

--traditional

Disable all gawk-specific extensions, but allow common extensions (e.g., the ** operator for exponentiation).

--version

Print the version of gawk on standard error and exit.

Patterns and Procedures

awk scripts consist of patterns and actions :

pattern  { action }

Both are optional. If pattern is missing, { action } is applied to all lines. If { action } is missing, the matched line is printed.

Patterns

A pattern can be any of the following:

general expression
    /regular expression/
    relational expressionpattern-matching expression
    BEGIN
    END

General expressions can be composed of quoted strings, numbers, operators, function calls, user-defined variables, or any of the predefined variables described later in the section "Built-in Variables."

Regular expressions use the extended set of metacharacters as described in Chapter 7.

The ^ and $ metacharacters refer to the beginning and end of a string (such as the fields), respectively, rather than the beginning and end of a line. In particular, these metacharacters will not match at a newline embedded in the middle of a string.

Relational expressions use the relational operators listed in the section "Operators," later in this chapter. For example, $2 > $1 selects lines for which the second field is greater than the first. Comparisons can be either string or numeric. Thus, depending upon the types of data in $1 and $2, awk will do either a numeric or a string comparison. This can change from one record to the next.

Pattern-matching expressions use the operators ~ (matches) and !~ (doesn't match). See the section "Operators" later in this chapter.

The BEGIN pattern lets you specify actions that take place before the first input line is processed. (Generally, you process the command line and set global variables here.)

The END pattern lets you specify actions that take place after the last input record is read.

BEGIN and END patterns may appear multiple times. The actions are merged as if there had been one large action.

Except for BEGIN and END, patterns can be combined with the Boolean operators || (or), && (and), and ! (not). An inclusive range of lines can also be specified using comma-separated patterns:

pattern,pattern

Procedures

Procedures consist of one or more commands, function calls, or variable assignments, separated by newlines or semicolons, and are contained within curly braces. Commands fall into five groups:

Variable or array assignments

Input/output commands

Built-in functions

Control-flow commands

User-defined functions

Simple Pattern-Action Examples

Print first field of each line:

    { print $1 }

Print all lines that contain pattern:

    /pattern/

Print first field of lines that contain pattern:

    /pattern/ { print $1 }

Select records containing more than two fields:

    NF > 2

Interpret input records as a group of lines up to a blank line. Each line is a single field:

    BEGIN { FS = "\n"; RS = "" }

Print fields 2 and 3 in switched order, but only on lines whose first field matches the string URGENT:

    $1 ~ /URGENT/ { print $3, $2 }

Count and print the number of lines matching pattern:

    /pattern/ { ++x }
    END { print x }

Add numbers in second column and print the total:

    { total += $2 }
    END { print "column total is", total}

Print lines that contain fewer than 20 characters:

    length($0) < 20

Print each line that begins with Name: and that contains exactly 7 fields:

    NF == 7 && /^Name:/

Print the fields of each record in reverse order, one per line:

    {
            for (i = NF; i >= 1; i--)
                    print $i
    }

Built-in Variables

All awk variables are included in gawk.

Version

Variable

Description

awk

ARGC

Number of arguments on the command line.

ARGV

An array containing the command-line arguments, indexed from 0 to ARGC - 1.

CONVFMT

String conversion format for numbers ("%.6g"). (POSIX)

ENVIRON

An associative array of environment variables.

FILENAME

Current filename.

FNR

Like NR, but relative to the current file.

FS

Field separator (a space).

NF

Number of fields in current record.

NR

Number of the current record.

OFMT

Output format for numbers ("%.6g"). (Pre-POSIX awk used this for string conversion also.)

OFS

Output field separator (a space).

ORS

Output record separator (a newline).

RLENGTH

Length of the string matched by match() function.

RS

Record separator (a newline).

RSTART

First position in the string matched by match() function.

SUBSEP

Separator character for array subscripts ("\034").

$0

Entire input record.

$ n

nth field in current record; fields are separated by FS.

gawk

ARGIND

Index in ARGV of current input file.

BINMODE

Controls binary I/O for input and output files. Use values of 1, 2, or 3 for input, output, or both kinds of files, respectively. Set it on the command line to affect standard input, standard output and standard error.

ERRNO

A string indicating the error when a redirection fails for getline or if close() fails.

FIELDWIDTHS

A space-separated list of field widths to use for splitting up the record, instead of FS.

IGNORECASE

When true, all regular expression matches, string comparisons and index() ignore case.

LINT

Dynamically controls production of "lint" warnings. With a value of "fatal", lint warnings become fatal errors.

PROCINFO

An array containing information about the process, such as real and effective UID numbers, process ID number, and so on.

RT

The text matched by RS, which can be a regular expression in gawk.

TEXTDOMAIN

The text domain (application name) for internationalized messages ("messages").

Operators

The following table lists the operators , in order of increasing precedence, that are available in awk.

Symbol

Meaning

= += -= *= /= %= ^= **=

Assignment

?:

C conditional expression

||

Logical OR (short-circuit)

&&

Logical AND (short-circuit)

in

Array membership

~ !~

Match regular expression and negation

< <= > >= != ==

Relational operators

(blank)

Concatenation

+ -

Addition, subtraction

* / %

Multiplication, division, and modulus (remainder)

+ - !

Unary plus and minus, and logical negation

^ **

Exponentiation

++ --

Increment and decrement, either prefix or postfix

$

Field reference

Tip

While ** and **= are common extensions, they are not part of POSIX awk .

Variable and Array Assignment

Variables can be assigned a value with an = sign. For example:

    FS = ","

Expressions using the operators +, -, /, and % (modulo) can be assigned to variables.

Arrays can be created with the split() function (described later), or they can simply be named in an assignment statement. Array elements can be subscripted with numbers (array [1], ..., array [ n ]) or with strings. Arrays subscripted by strings are called associative arrays.[*] For example, to count the number of widgets you have, you could use the following script:

    /widget/ { count["widget"]++ }       Count widgets
    END      { print count["widget"] }Print the count

You can use the special for loop to read all the elements of an associative array:

    for (item in array)
            process array[item]

The index of the array is available as item, while the value of an element of the array can be referenced as array[item].

You can use the in operator to test that an element exists by testing to see if its index exists. For example:

    if (index in array)
            ...

tests that array[index] exists, but you cannot use it to test the value of the element referenced by array[index].

You can also delete individual elements of the array using the delete statement. (See also the delete entry in the section "Alphabetical Summary of awk Functions and Commands," later in this chapter.)

Escape Sequences

Within string and regular expression constants, the following escape sequences may be used.

Sequence

Meaning

\a

Alert (bell)

\b

Backspace

\f

Form feed

\n

Newline

\r

Carriage return

\t

TAB

\v

Vertical tab

\\

Literal backslash

\ nnn

Octal value nnn

\x nn

Hexadecimal value nn

\"

Literal double quote (in strings)

\/

Literal slash (in regular expressions)

Tip

The \x escape sequence is a common extension; it is not part of POSIX awk.

Octal and Hexadecimal Constants in gawk

gawk allows you to use octal and hexadecimal constants in your program source code. The form is as in C: octal constants start with a leading 0, and hexadecimal constants with a leading 0x or 0X. The hexadecimal digits a-f may be in either upper- or lowercase.

    $ gawk 'BEGIN { print 042, 42, 0x42 }'
    34 42 66

Use the strtonum() function to convert octal or hexadecimal input data into numerical values.

[*] In fact, all arrays in awk are associative; numeric subscripts are converted to strings before using them as array subscripts. Associative arrays are one of awk's most powerful features.

User-Defined Functions

POSIX awk allows you to define your own functions. This makes it easy to encapsulate sequences of steps that need to be repeated into a single place, and reuse the code from anywhere in your program.

The following function capitalizes each word in a string. It has one parameter, named input, and five local variables that are written as extra parameters:

    # capitalize each word in a string
    function capitalize(input,    result, words, n, i, w)
    {
       result = ""
       n = split(input, words, " ")
       for (i = 1; i <= n; i++) {
            w = words[i]
            w = toupper(substr(w, 1, 1)) substr(w, 2)
            if (i > 1)
                     result = result " "
            result = result w
       }
       return result
    }

    # main program, for testing
    { print capitalize($0) }

With this input data:

    A test line with words and numbers like 12 on it.

This program produces:

    A Test Line With Words And Numbers Like 12 On It.

Tip

For user-defined functions, no space is allowed between the function name and the left parenthesis when the function is called.

Gawk-Specific Features

This section describes features unique to gawk .

Coprocesses and Sockets

gawk allows you to open a two-way pipe to another process, called a coprocess. This is done with the |& operator used with getline and print or printf.

    print database command |& "db_server"
    "db_server" |& getline response

If the command used with |& is a filename beginning with /inet/, gawk opens a TCP/IP connection. The filename should be of the following form:

    /inet/protocol/lport/hostname/rport

The parts of the filename are:

protocol

One of tcp, udp, or raw, for TCP, UDP, or raw IP sockets, respectively. Note: raw is currently reserved but unsupported.

lport

The local TCP or UPD port number to use. Use 0 to let the operating system pick a port.

hostname

The name or IP address of the remote host to connect to.

rport

The port (application) on the remote host to connect to. A service name (e.g., tftp) is looked up using the C getservbyname() function.

Profiling

When gawk is built and installed, a separate program named pgawk (profilinggawk) is built and installed with it. The two programs behave identically; however, pgawk runs more slowly since it keeps execution counts for each statement as it runs. When it is done, it automatically places an execution profile of your program in a file named awkprof.out. (You can change the filename with the --profile option.)

The execution profile is a "prettyprinted" version of your program with execution counts listed in the left margin. For example, after running this program:

    $ pgawk '/bash$/ { nusers++ }
    > END { print nusers, "users use Bash." }' /etc/passwd
    16 users use Bash.

The execution profile looks like this:

        # gawk profile, created Mon Nov  1 14:34:38 2004

        # Rule(s)

    35  /bash$/ { # 16
    16          nusers++
        }

        # END block(s)

        END {
     1          print nusers, "users use Bash."
        }

If sent SIGUSR1, pgawk prints the profile and an awk function call stack trace, and then keeps going. Multiple SIGUSR1 signals may be sent; the profile and trace will be printed each time. This facility is useful if your awk program appears to be looping, and you want to see if something unexpected is being executed.

If sent SIGHUP, pgawk prints the profile and stack trace, and then exits.

File Inclusion

The igawk program provides a file inclusion facility for gawk. You invoke it the same way you do gawk: it passes all command-line arguments on to gawk. However, igawk processes source files and command-line programs for special statements of the form:

    @include file.awk

Such files are searched for along the list of directories specified by the AWKPATH environment variable. When found, the @include line is replaced with the text of the corresponding file. Included files may themselves include other files with @include.

The combination of the AWKPATH environment variable and igawk makes it easy to have and use libraries of awk functions.

Internationalization

You can internationalize your programs if you use gawk. This consists of choosing a text domain for your program, marking strings that are to be translated, and if necessary, using the bindtextdomain(), dcgettext(), and dcngettext() functions.

Localizing your program consists of extracting the marked strings, creating translations, and compiling and installing the translations in the proper place. Full details are given in Effective awk Programming, cited in the Bibliography.

The internationalization features in gawk use GNU gettext. You may need to install the GNU gettext tools to create translations if your system doesn't already have them. Here is a very brief outline of the steps involved.

Set TEXTDOMAIN to your text domain in a BEGIN block:

    BEGIN { TEXTDOMAIN = "whizprog" }

Mark all strings to be translated by prepending a leading underscore:

    printf(_"whizprog: can't open /dev/telepath (%s)\n",
                       dcgettext(ERRNO)) > "/dev/stderr"

Extract the strings with the --gen-po option:

    $ gawk --gen-po -f whizprog.awk > whizprog.pot

Copy the file for translating, and make the translations:

    $ cp whizprog.pot esperanto.po
    $ed esperanto.po

Use the msgfmt program from GNU gettext to compile the translations. The binary format allows fast lookup of the translations at runtime. The default output is a file named messages:

    $ msgfmt esperanto.po
    $mv messages esperanto.mo

Install the file in the standard location. This is usually done at program installation. The location can vary from system to system.

That's it! gawk will automatically find and use the translated messages, if they exist.

Implementation Limits

Many versions of awk have various implementation limits , on things such as:

Number of fields per record

Number of characters per input record

Number of characters per output record

Number of characters per field

Number of characters per printf string

Number of characters in literal string

Number of characters in character class

Number of files open

Number of pipes open

The ability to handle 8-bit characters and characters that are all zero (ASCII NUL)

gawk does not have limits on any of the above items, other than those imposed by the machine architecture and/or the operating system.

Group Listing of awk Functions and Commands

The following table classifies awk functions and commands.

Function type

Functions or commands

a Available in gawk.

b Available in Bell Labs awk and gawk.

Arithmetic

atan2

cos

exp

int

log

rand

sin

sqrt

srand

String

asort a

asorti a

gensub a

gsub

index

length

match

split

sprintf

strtonum a

sub

substr

tolower

toupper

Control Flow

break

continue

do/while

exit

for

if/else

return

while

I/O

close

fflush b

getline

next

nextfile B

print

printf

Programming

extension b

delete

function

system

The following functions are specific to gawk.

Function type

Functions or commands

Bit Manipulation

and

compl

lshift

or

rshift

xor

Time

mktime

strftime

systime

Translation

bindtextdomain

dcgettext

dcngettext

Alphabetical Summary of awk Functions and Commands

The following alphabetical list of keywords and functions includes all that are available in POSIX awk and gawk. Extensions that aren't part of POSIX awk but that are in both gawk and the Bell Laboratories awk are marked as {E}. Cases where gawk has extensions are marked as {G}. Items that aren't marked with a symbol are available in all versions.

Name

#

Synopsis

#

Ignore all text that follows on the same line. # is used in awk scripts as the comment character and is not really a command.

Name

and

Synopsis

and(expr1, expr2){G}

Return the bitwise AND of expr1 and expr2, which should be values that fit in a C unsigned long.

Name

asort

Synopsis

asort(src [,dest]){G}

Sort the array src based on the element values, destructively replacing the indices with values from one to the number of elements in the array. If dest is supplied, copy src to dest and sort dest, leaving src unchanged. Returns the number of elements in src.

Name

asorti

Synopsis

asorti(src [,dest]){G}

Like asort(), but the sorting is done based on the indices in the array, not based on the element values. For gawk 3.1.2 and later.

Name

atan2

Synopsis

atan2(y, x)

Return the arctangent of y/x in radians.

Name

bindtextdomain

Synopsis

bindtextdomain(dir [,domain]){G}

Look in directory dir for message translation files for text domain domain (default: value of TEXTDOMAIN). Returns the directory where domain is bound.

Name

break

Synopsis

break

Exit from a while, for, or do loop.

Name

close

Synopsis

close(expr)
close(expr, how){G}

In most implementations of awk, you can only have up to 10 files open simultaneously and one pipe. Therefore, POSIX awk provides a close() function that allows you to close a file or a pipe. It takes the same expression that opened the pipe or file as an argument. This expression must be identical, character by character, to the one that opened the file or pipe—even whitespace is significant.

In the second form, close one end of either a TCP/IP socket or a two-way pipe to a coprocess. how is a string, either "from" or "to". Case does not matter.

Name

compl

Synopsis

compl(expr){G}

Return the bitwise complement of expr, which should be a value that fits in a C unsigned long.

Name

continue

Synopsis

continue

Begin next iteration of while, for, or do loop.

Name

cos

Synopsis

cos(x)

Return the cosine of x, an angle in radians.

Name

dcgettext

Synopsis

dcgettext(str [, dom [, cat]]){G}

Return the translation of str for the text domain dom in message category cat. Default text domain is value of TEXTDOMAIN. Default category is "LC_MESSAGES".

Name

dcngettext

Synopsis

dcngettext(str1, str2, num [, dom [, cat]]){G}

If num is one, return the translation of str1 for the text domain dom in message category cat. Otherwise return the translation of str2. Default text domain is value of TEXTDOMAIN. Default category is "LC_MESSAGES". For gawk 3.1.1 and later.

Name

delete

Synopsis

delete array[element]
delete array{E}

Delete element from array. The brackets are typed literally. The second form is a common extension, which deletes all elements of the array in one shot.

Name

do

Synopsis

do
 statementwhile (expr)

Looping statement. Execute statement, then evaluate expr and if true, execute statement again. A series of statements must be put within braces.

Name

exit

Synopsis

exit [expr]

Exit from script, reading no new input. The END action, if it exists, will be executed. An optional expr becomes awk 's return value.

Name

exp

Synopsis

exp(x)

Return exponential of x (e x).

Name

extension

Synopsis

extension(lib, init){G}

Dynamically load the shared object file lib, calling the function init to initialize it. Return the value returned by the init function. This function allows you to add new built-in functions to gawk. See Effective awk Programming for the details.

Name

fflush

Synopsis

fflush([output-expr]){E}

Flush any buffers associated with open output file or pipe output-expr.

gawk extends this function. If no output-expr is supplied, it flushes standard output. If output-expr is the null string (""), it flushes all open files and pipes.

Name

for

Synopsis

for (init-expr; test-expr; incr-expr)statement

C-style looping construct. init-expr assigns the initial value of a counter variable. test-expr is a relational expression that is evaluated each time before executing the statement. When test-expr is false, the loop is exited. incr-expr is used to increment the counter variable after each pass. All of the expressions are optional. A missing test-expr is considered to be true. A series of statements must be put within braces.

Name

for

Synopsis

for (item in array)statement

Special loop designed for reading associative arrays. For each element of the array, the statement is executed; the element can be referenced by array [item]. A series of statements must be put within braces.

Name

function

Synopsis

function name(parameter-list) {
 statements}

Create name as a user-defined function consisting of awk statements that apply to the specified list of parameters. No space is allowed between name and the left parenthesis when the function is called.

Name

gensub

Synopsis

gensub(regex, str, how [, target]){G}

General substitution function. Substitute str for matches of the regular expression regex in the string target. If how is a number, replace the howth match. If it is "g" or "G", substitute globally. If target is not supplied, $0 is used. Return the new string value. The original target is not modified. (Compare with gsub and sub.) Use & in the replacement string to stand for the text matched by the pattern.

Name

getline

Synopsis

getline
getline [var] [< file]
command | getline [var]
command |& getline [var]{G}

Read next line of input.

The second form reads input from file and the third form reads the output of command. All forms read one record at a time, and each time the statement is executed it gets the next record of input. The record is assigned to $0 and is parsed into fields, setting NF, NR, and FNR. If var is specified, the result is assigned to var and $0 and NF are not changed. Thus, if the result is assigned to a variable, the current record does not change. getline is actually a function and it returns 1 if it reads a record successfully, 0 if end-of-file is encountered, and -1 if for some reason it is otherwise unsuccessful.

The fourth form reads the output from coprocess command. See the earlier section "Coprocesses and Sockets" for more information.

Name

gsub

Synopsis

gsub(regex, str [, target])

Globally substitute str for each match of the regular expression regex in the string target. If target is not supplied, default to $0. Return the number of substitutions. Use & in the replacement string to stand for the text matched by the pattern.

Name

if

Synopsis

if (condition)
 statement1[else
 statement2]

If condition is true, do statement1; otherwise, do statement2 in optional else clause. The condition can be an expression using any of the relational operators <, <=, ==, !=, >=, or >, as well as the array membership operator in, and the pattern-matching operators ~ and !~ (e.g., if ($1 ~ /[Aa].*/)). A series of statements must be put within braces. Another if can directly follow an else in order to produce a chain of tests or decisions.

Name

index

Synopsis

index(str, substr)

Return the position (starting at 1) of substr in str, or zero if substr is not present in str.

Name

int

Synopsis

int(x)

Return integer value of x by truncating any fractional part.

Name

length

Synopsis

length([arg])

Return length of arg, or the length of $0 if no argument.

Name

log

Synopsis

log(x)

Return the natural logarithm (base e) of x.

Name

lshift

Synopsis

lshift(expr, count){G}

Return the result of shifting expr left by count bits. Both expr and count should be values that fit in a C unsigned long.

Name

match

Synopsis

match(str, regex)
match(str, regex [, array]){G}

Function that matches the pattern, specified by the regular expression regex, in the string str, and returns either the position in str where the match begins, or 0 if no occurrences are found. Sets the values of RSTART and RLENGTH to the start and length of the match, respectively.

If array is provided, gawk puts the text that matched the entire regular expression in array [0], the text that matched the first parenthesized subexpression in array [1], the second in array [2], and so on.

Name

mktime

Synopsis

mktime(timespec){G}

Turns timespec (a string of the form " YYYY MM DD HH MM SS [DST] " representing a local time) into a time-of-day value in seconds since Midnight, January 1, 1970, UTC.

Name

next

Synopsis

next

Read next input line and start new cycle through pattern/actions statements.

Name

nextfile

Synopsis

nextfile {E}

Stop processing the current input file and start new cycle through pattern/actions statements, beginning with the first record of the next file.

Name

or

Synopsis

or(expr1, expr2){G}

Return the bitwise OR of expr1 and expr2, which should be values that fit in a C unsigned long.

Name

print

Synopsis

print [ output-expr[, ...]] [ dest-expr ]

Evaluate the output-expr and direct it to standard output followed by the value of ORS. Each comma-separated output-expr is separated in the output by the value of OFS. With no output-expr, print $0. The output may be redirected to a file or pipe via the dest-expr, which is described in the section "Output Redirections," later in this chapter.

Name

printf

Synopsis

printf(format [, expr-list ]) [ dest-expr ]

An alternative output statement borrowed from the C language. It has the ability to produce formatted output. It can also be used to output data without automatically producing a newline. format is a string of format specifications and constants. expr-list is a list of arguments corresponding to format specifiers. As for print, output may be redirected to a file or pipe. See the section "printf Formats," later in the chapter, for a description of allowed format specifiers.

Like any string, format can also contain embedded escape sequences: \n (newline) or \t (tab) being the most common. Spaces and literal text can be placed in the format argument by quoting the entire argument. If there are multiple expressions to be printed, there should be multiple format specifiers.

Example

Using the script:

    { printf("The sum on line %d is %.0f.\n", NR, $1+$2) }

The following input line:

    5   5

produces this output, followed by a newline:

    The sum on line 1 is 10.

Name

rand

Synopsis

rand()

Generate a random number between 0 and 1. This function returns the same series of numbers each time the script is executed, unless the random number generator is seeded using srand().

Name

return

Synopsis

return [expr]

Used within a user-defined function to exit the function, returning the value of expr. The return value of a function is undefined if expr is not provided.

Name

rshift

Synopsis

rshift(expr, count){G}

Return the result of shifting expr right by count bits. Both expr and count should be values that fit in a C unsigned long.

Name

sin

Synopsis

sin(x)

Return the sine of x, an angle in radians.

Name

split

Synopsis

split(string, array [, sep])

Split string into elements of array array [1],...,array [ n ]. Return the number of array elements created. The string is split at each occurrence of separator sep. If sep is not specified, FS is used.

Name

sprintf

Synopsis

sprintf(format [, expressions])

Return the formatted value of one or more expressions, using the specified format. Data is formatted but not printed. See the section "printf Formats," later in the chapter, for a description of allowed format specifiers.

Name

sqrt

Synopsis

sqrt(arg)

Return the square root of arg.

Name

srand

Synopsis

srand([expr])

Use optional expr to set a new seed for the random number generator. Default is the time of day. Return value is the old seed.

Name

strftime

Synopsis

strftime([format [,timestamp]]){G}

Format timestamp according to format. Return the formatted string. The timestamp is a time-of-day value in seconds since Midnight, January 1, 1970, UTC. The format string is similar to that of sprintf, in that it is a mixture of literal text and format specifiers. If timestamp is omitted, it defaults to the current time. If format is omitted, it defaults to a value that produces output similar to that of the Unix date command. See the date entry in Chapter 2 for a list.

Name

strtonum

Synopsis

strtonum(expr){G}

Return the numeric value of expr, which is a string representing an octal, decimal, or hexadecimal number in the usual C notations. Use this function for processing nondecimal input data.

Name

sub

Synopsis

sub(regex, str [, target])

Substitute str for first match of the regular expression regex in the string target. If target is not supplied, default to $0. Return 1 if successful; 0 otherwise. Use & in the replacement string to stand for the text matched by the pattern.

Name

substr

Synopsis

substr(string, beg [, len])

Return substring of string at beginning position beg (counting from 1), and the characters that follow to maximum specified length len. If no length is given, use the rest of the string.

Name

system

Synopsis

system(command)

Function that executes the specified command and returns its exit status. The status of the executed command typically indicates success or failure. A value of 0 means that the command executed successfully. A nonzero value indicates a failure of some sort. The documentation for the command that you're running will give you the details.

awk does not make the output of the command available for processing within the awk script. Use command| getline to read the output of a command into the script.

Name

systime

Synopsis

systime() {G}

Return a time-of-day value in seconds since Midnight, January 1, 1970, UTC.

Example

Log the start and end times of a data-processing program:

    BEGIN {
            now = systime()
            mesg = strftime("Started at %Y-%m-%d %H:%M:%S", now)
            print mesg
    }
    process data ...
    END {
            now = systime()
            mesg = strftime("Ended at %Y-%m-%d %H:%M:%S", now)
            print mesg
    }

Name

tolower

Synopsis

tolower(str)

Translate all uppercase characters in str to lowercase and return the new string.[*]

[*] Very early versions of nawk don't support tolower() and toupper(). However, they are now part of the POSIX specification for awk .

Name

toupper

Synopsis

toupper(str)

Translate all lowercase characters in str to uppercase and return the new string.

Name

while

Synopsis

while (condition)statement

Do statement while condition is true (see if for a description of allowable conditions). A series of statements must be put within braces.

Name

xor

Synopsis

xor(expr1, expr2){G}

Return the bitwise XOR of expr1 and expr2, which should be values that fit in a C unsigned long.

Output Redirections

For print and printf, dest-expr is an optional expression that directs the output to a file or pipe.

> file

Directs the output to a file, overwriting its previous contents.

>> file

Appends the output to a file, preserving its previous contents. In both of these cases, the file will be created if it does not already exist.

| command

Directs the output as the input to a system command.

|& command

Directs the output as the input to a coprocess. gawk only.

Be careful not to mix > and >> for the same file. Once a file has been opened with >, subsequent output statements continue to append to the file until it is closed.

Remember to call close() when you have finished with a file, pipe, or coprocess. If you don't, eventually you will hit the system limit on the number of simultaneously open files.

printf Formats

Format specifiers for printf and sprintf have the following form:

    %[posn$][flag][width][.precision]letter

The control letter is required. The format conversion control letters are given in the following table.

Character

Description

c

ASCII character.

d

Decimal integer.

i

Decimal integer. (Added in POSIX)

e

Floating-point format ([-]d.precision e[+-]dd).

E

Floating-point format ([-]d.precision E[+-]dd).

f

Floating-point format ([-]ddd.precision).

g

e or f conversion, whichever is shortest, with trailing zeros removed.

G

E or f conversion, whichever is shortest, with trailing zeros removed.

o

Unsigned octal value.

s

String.

u

Unsigned decimal value.

x

Unsigned hexadecimal number. Uses a-f for 10 to 15.

X

Unsigned hexadecimal number. Uses A-F for 10 to 15.

%

Literal %.

gawk allows you to provide a positional specifier after the % (posn$). A positional specifier is an integer count followed by a $. The count indicates which argument to use at that point. Counts start at one, and don't include the format string. This feature is primarily for use in producing translations of format strings. For example:

    $ gawk 'BEGIN { printf "%2$s, %1$s\n", "world", "hello" }'
    hello, world

The optional flag is one of the following:

Character

Description

-

Left-justify the formatted value within the field.

space

Prefix positive values with a space and negative values with a minus.

+

Always prefix numeric values with a sign, even if the value is positive.

#

Use an alternate form: %o has a preceding 0; %x and %X are prefixed with 0x and 0X, respectively; %e, %E, and %f always have a decimal point in the result; and %g and %G do not have trailing zeros removed.

0

Pad output with zeros, not spaces. This only happens when the field width is wider than the converted result. This flag applies to all output formats, even nonnumeric ones. (Unfortunately, not all awk implementations do this correctly.)

'

gawk 3.1.4 and later only. For numeric formats, in locales that support it, supply a thousands-separator character.

The optional width is the minimum number of characters to output. The result will be padded to this size if it is smaller. The 0 flag causes padding with zeros; otherwise, padding is with spaces.

The precision is optional. Its meaning varies by control letter, as shown in this table:

Conversion

Precision means

%d, %i, %o, %u, %x, %X

The minimum number of digits to print.

%e, %E, %f

The number of digits to the right of the decimal point.

%g, %G

The maximum number of significant digits.

%s

The maximum number of characters to print.

Source Code

The following URLs indicate where to get source code for four freely available versions of awk, and for GNU gettext .

http://cm.bell-labs.com/~bwk

Brian Kernighan's home page, with links to the source code for the latest version of awk from Bell Laboratories.

ftp://ftp.whidbey.net/pub/brennan/mawk1.3.3.tar.gz

Michael Brennan's mawk . A very fast, very robust version of awk.

ftp://ftp.gnu.org/gnu/gawk/

The Free Software Foundation's version of awk, called gawk.

http://www.gnu.org/software/gawk/gawk.html

The Free Software Foundation's home page for gawk.

http://awka.sourceforge.net

The home page for awka, a translator that turns awk programs into C, compiles the generated C, and then links the object code with a library that performs the core awk functions.

ftp://ftp.gnu.org/gnu/gettext/

The source code for GNU gettext. Get this if you need to produce translations for your awk programs that use gawk.

Part III. Software Development

Part III describes important tools for software development. The Unix operating system earned its reputation by providing an unexcelled environment for software development. RCS, CVS, Subversion, make, and GDB are major contributors to the efficiency of this environment.

RCS allows multiple versions of a source file to be stored in a single archival file. CVS goes further, enabling easy multideveloper access to a group of shared source files. Subversion is a new version control system intended to "build a better CVS." make automatically updates a group of interrelated programs. The GDB debugger lets you examine the state of your program as it runs in order to find and fix problems.

Finally, an important part of software development is program documentation. Unix programs traditionally come with a "man page," a file that documents the program's usage, for use with the man command. Manual pages are written using the venerable troff text formatting program. troff is no longer used for much else, though. Therefore, we have provided enough information to enable you to write a manual page.

Chapter 12, Source Code Management: An Overview

Chapter 13, The Revision Control System

Chapter 14, The Concurrent Versions System

Chapter 15, The Subversion Version Control System

Chapter 16, The GNU make Utility

Chapter 17, The GDB Debugger

Chapter 18, Writing Manual Pages

Chapter 12. Source Code Management: An Overview

The following chapters describe three popular source code management systems for Unix. This chapter introduces the major concepts involved with using these systems for users who may never have used one. If you're already familiar with source code management, feel free to skip ahead to the particular software suite that interests you. See also the related books in the Bibliography.

This chapter covers the following topics:

Introduction and terminology

Usage models

Unix source code management systems

Other source code management systems

Introduction and Terminology

Source code management systems let you store and retrieve multiple versions of a file. While originally designed for program source code, they can be used for any kind of file: source code, documentation, configuration files, and so on. Modern systems allow you to store binary files as well, such as image or audio data.

Source code management systems let you compare different versions of a file, as well as do "parallel development." In other words, you can work on two different versions of a file at the same time, with the source code management system storing both versions. You can then merge changes from two versions into a third version. This will become more clear shortly. We'll start by defining some terms.

Repository

A repository is where the source code management system stores its copy of your file. Usually one Unix file is used to hold all the different versions of a source file. Each source code management system uses its own format to allow it to retrieve different versions easily, and to track who made what changes, and when.

Sandbox

A sandbox is your personal, so-called "working copy" of the program or set of documents under development. You edit your private copy of the file in your own sandbox, returning changes to the source code management system when you're satisfied with the new version.

Check in, check out

You "check out" files from the repository, edit them, and then "check them in" when you're satisfied with your changes. Other developers working against the same repository will not see your changes until after you check them back in. Another term used for check-in is commit.

Log message

Every time you check in a file, you are prompted for a message describing the changes you made. You should do so in a concise fashion. If your software development practices include the use of a bug tracking system, you might also wish to include the bug number or problem report (PR) number which your change resolves.

Keyword substitutions

When you check out a file, the source code management system can replace special keywords with values representing such things as the file's version number, the name of the user who made the most recent change, the date and time the file was last changed, the file's name, and so on. Each of the systems described in this book uses an overlapping set of keywords. Some systems always do keyword substitution, while others require that you explicitly enable the feature for each file.

Branch

A branch is a separate development path. For example, once you've released version 1.0 of whizprog, you will wish to proceed with the development for version 2.0. The main line of development is often called the trunk.

Now consider what happens when you wish to make a bug-fix release to whizprog 1.0, to be named version 1.1. You create a separate branch, based on the original 1.0 code, in a new sandbox. You perform all your development there, without disturbing the development being done for the 2.0 release.

Tag

A tag is a name you give to a whole group of files at once, at whatever version each individual file may be, in order to identify those files as part of a particular group. For example, you might create tags WHIZPROG-1_0-ALPHA, WHIZPROG-1_0-BETA, WHIZPROG-1_0-RELEASE, and so on. This is a powerful facility which should be used well, since it allows you to retrieve a "snapshot" of your entire development tree as it existed at different points in time.

Merging

Most typically, when development along a branch is completed, it becomes necessary to merge the changes from that branch back into the main line of development. In our hypothetical example, all the bugs fixed in whizprog 1.0 to create version 1.1 should also be fixed in the ongoing 2.0 development. Source code management systems can help you automate the process of merging.

Conflict

A conflict occurs when two developers make inconsistent changes to the same part of a source file. Modern source code management systems detect the conflict, usually marking the conflicting parts of the file in your working copy using special markers. You first discuss the conflict with the other developer, in order to arrive at a correct resolution of the conflict. Once that's done, you then resolve the conflict manually (by making the appropriate changes), and then you check in the new version of the file.

Client/server

As with other "client/server" networking models, the idea here is that the repository is stored on one machine, the server, and that different developers may access the repository from multiple client systems. This powerful feature facilitates distributed development, allowing developers to work easily on their local systems, with the repository kept in a central place where it can be easily accessed and administered.

Usage Models

Different systems have different conceptual "models" as to how they're used.

Older systems such as SCCS and RCS use a "check out with locking" model. These systems were developed before client/server computing, when software development was done on centralized minicomputers and mainframes. In this model, the repository is a central directory on the same machine where the developers work, and each developer checks out a private copy into their own sandbox. In order to avoid two developers making conflicting changes to a file, the file must be locked when it's checked out. Only one user may lock a particular version of a file at a time. When that user has checked in their changes, they unlock the file so that the next user can check in changes. If necessary, the second user may "break" the first user's lock, in which case the first user is notified via electronic mail.

This model works well for small projects where developers are co-located and can communicate easily. As long as one developer locks a file when she checks it out, another developer wishing to work with the file will know that he can't until the first one is done. The drawback is that such locking can slow down development significantly.

Newer systems, such as CVS and Subversion, use a "copy, modify, merge" model. In practice, when two developers wish to work on the same file, they usually end up changing different, unrelated parts of the file. Most of the time each developer can make changes without adversely affecting the other. Thus, files are not locked upon checkout into a sandbox. Instead, the source code management system detects conflicts and disallows a check-in when conflicts exist.

For example, consider two developers, dangermouse and penfold, who are both working on whizprog.c. They each start with version 1.4 of the file. dangermouse commits his changes, creating version 1.5. Before penfold can commit his changes, the source code management system notices that the file has changed in the repository. penfold must first merge dangermouse's changes into his working copy. If there are no conflicts, he can then commit his changes, creating version 1.6. On the other hand, if there are conflicts, he must first resolve them (they'll be marked in the working copy), and only then may he commit his version.

The combination of the "copy, modify, merge" model with a networked client/server facility creates a powerful environment for doing distributed development. Developers no longer have to worry about file locks. Because the source code management system enforces serialization (making sure that new changes are based on the latest version in the repository), development can move more smoothly, with little danger of miscommunication or that successive changes will be lost.

Unix Source Code Management Systems

There are several source code management systems for Unix .

Source Code Control System (SCCS)

SCCS is the original Unix source code management system. It was developed in the late 1970s for the Programmer's Workbench (PWB) Unix systems within Bell Labs. It is still in use at a few large long-time Unix sites. However, for a long time it was not available as a standard part of most commercial or BSD Unix systems, and it did not achieve the wide-spread popularity of other, later systems. (It is still available with Solaris.) SCCS uses a file storage format that allows it to retrieve any version of a source file in constant time.

Revision Control System (RCS)

RCS was developed in the early 1980s at Purdue University by Walter F. Tichy. It became popular in the Unix world when it was shipped with 4.2 BSD in 1983. At the time, Berkeley Unix was the most widely-used Unix variant, even though to get it a site had to have a Unix license from AT&T.

RCS is easier to use than SCCS. Although it has a number of related commands, only three or four are needed for day-to-day use, and they are quickly mastered. A central repository is easy to use: you first create a directory for the sandbox. In the sandbox, you make a symbolic link to the repository named RCS, and then all the developers can share the repository. RCS uses a file format that is optimized for retrieving the most recent version of a file.

Concurrent Versions System (CVS)

CVS was initially built as a series of shell scripts sitting atop RCS. Later it was rewritten in C for robustness, although still using RCS commands to manage the storage of files. However, for quite some time, CVS has had the RCS functionality built into it, and no longer requires that RCS be available. The file format continues to be the same. CVS was the first distributed source code management system, and is currently the standard one for Unix systems, and in particular for collaborative, distributed, Free, and Open Source development projects.

The repository is named when you create a sandbox, and is then stored in the files in the sandbox, so that it need not be provided every time you run a CVS command. Unlike SCCS and RCS, which provide multiple commands, CVS has one main command (named cvs), which you use for just about every operation.

Subversion

With increasing use, it became clear that CVS lacked some fundamental capabilities. The Subversion project was started by several long-time CVS users and developers with the explicit goal to "build a better CVS," not necessarily to explore uncharted territory in source code management systems. Subversion is thus intentionally easy to learn for CVS users. Subversion uses its own format for data storage, based on the Berkeley DB in-process data library. Distributed use was designed in from day one, providing useful facilities that leverage the capabilities of the well-known Apache HTTP server.

RCS, CVS, and Subversion represent a progression, each one building on the features of its predecessors. For example, all three share a large subset of the same keyword substitutions, and command names are similar or identical in all three. They also demonstrate the progression from centralized, locking-based development to distributed, conflict-resolution-based development.

Other Source Code Management Systems

Besides the source code management systems covered in this book, several other systems are worth knowing about. The following list, though, is by no means exhaustive.

Arch

GNU Arch is a distributed source code management system similar to CVS and Subversion. One of its significant strengths is that you can do off-line development with it, working on multiple versions even on systems that are not connected to the Internet and that cannot communicate with the central repository. For more information, see http://www.gnu.org/software/gnu-arch/.

Codeville

Codeville is a distributed version control system in the early stages of development. It is written in Python, is easy to set up and use, and shows a lot of promise. For more information, see http://codeville.org/.

CSSC

CSSC is a free clone of SCCS. It intends to provide full compatibility with SCCS, including file format, command names and options, and "bug for bug" compatible behavior. If you have an existing SCCS repository, you should be able to drop CSSC into your environment, in place of SCCS. CSSC can be used to migrate from a commercial Unix system to a freely available clone, such as GNU/Linux or a BSD system. For more information, see http://directory.fsf.org/GNU/CSSC.html.

Monotone

The web page for monotone describes it well:

monotone is a free distributed version control system. It provides a simple, single-file transactional version store, with fully disconnected operation and an efficient peer-to-peer synchronization protocol. It understands history-sensitive merging, lightweight branches, integrated code review, and third party testing. It uses cryptographic version naming and client-side RSA certificates. It has good internationalization support, has no external dependencies, runs on Linux, Solaris, Mac OS X, NetBSD, and Windows, and is licensed under the GNU GPL.

For more information, see http://www.venge.net/monotone/.

Chapter 13. The Revision Control System

The Revision Control System (RCS ) provides a series of commands for maintaining multiple versions of files. It can manage both textual and binary data. While primarily used for software development, RCS can manage other files as well: documentation, textual databases, and so on.

This chapter presents the following topics:

Overview of commands

Basic operation

General RCS specifications

Alphabetical summary of commands

The Revision Control System (RCS) is designed to keep track of multiple file revisions, thereby reducing the amount of storage space needed. With RCS you can automatically store and retrieve revisions, merge or compare revisions, keep a complete history (or log) of changes, and identify revisions using symbolic keywords. RCS preserves execute permission on the files it manages, and you can store binary data in RCS files.

RCS is not a standard part of Solaris. It can be obtained from the Free Software Foundation (see http://www.gnu.org/software/rcs/). It typically does come with GNU/Linux and Mac OS X. The Official RCS Homepage may be found at http://www.cs.purdue.edu/homes/trinkle/RCS/. This chapter describes RCS Version 5.7.

For more information, see Applying RCS and SCCS, listed in the Bibliography.

Overview of Commands

The three most important RCS commands are:

ci

Check in revisions (put a file under RCS control).

co

Check out revisions.

rcs

Set up or change attributes of RCS files.

Two commands provide information about RCS files:

ident

Extract keyword values from an RCS file.

rlog

Display a summary (log) about the revisions in an RCS file.

You can compare RCS files with these commands:

merge

Incorporate changes from two files into a third file.

rcsdiff

Report differences between revisions.

rcsmerge

Incorporate changes from two RCS files into a third RCS file.

The following commands help with configuration management. However, they are considered optional, so they are not always installed:

rcsclean

Remove working files that have not been changed.

rcsfreeze

Label the files that make up a configuration.

Basic Operation

Normally, you maintain RCS files in a subdirectory called RCS, so the first step in using RCS should be:

    mkdir RCS

Next, you place an existing file (or files) under RCS control by running the check-in command:

    ci file

This creates a file called file ,v in the RCS directory. file ,v is called an RCS file, and it stores all future revisions of file. When you run ci on a file for the first time, you are prompted to describe the contents. ci then deposits file into the RCS file as revision 1.1.

To edit a new revision, check out a copy:

    co -l file

This causes RCS to extract a copy of file from the RCS file. You must lock the file with -l to make it writable by you. This copy is called a working file. When you're done editing, you can record the changes by checking the working file back in again:

    ci file

This time, you are prompted to enter a log of the changes made, and the file is deposited as revision 1.2. Note that a check-in normally removes the working file. To retrieve a read-only copy, do a check-out without a lock:

    co file

This is useful when you need to keep a copy on hand for compiling or searching. As a shortcut to the previous ci/co, you could type:

    ci -u file

This checks in the file but immediately checks out a read-only ("unlocked") copy. In practice, you would probably make a "checkpoint" of your working version and then keep going, like this:

    ci -l file

This checks in the file, and then checks it back out again, locked, for continued work. To compare changes between a working file and its latest revision, you can type:

    rcsdiff file

Another useful command is rlog, which shows a summary of log messages. System administrators can use the rcs command to set up the default behavior of RCS .

General RCS Specifications

This section discusses:

Keyword substitution

Keywords

Example values

Revision numbering

Specifying the date

Specifying states

Standard options and environment variables

Keyword Substitution

RCS lets you place keyword variables in your working files. These variables are later expanded into revision notes. You can then use the notes either as embedded comments in the input file or as text strings that appear when the output is printed. To create revision notes via keyword substitution , follow this procedure:

In your working file, type any of the keywords listed below.

Check the file in.

Check the file out again. Upon checkout, the co command expands each keyword to include its value. That is, co replaces instances of:

                $
                keyword
                $

with:

$keyword:value$.

Subsequent check-in and check-out of a file updates any existing keyword values. Unless otherwise noted below, existing values are replaced by new values.

Many commands have a -k option that provides considerable flexibility during keyword substitution.

Keywords

$Author$

Username of person who checked in the revision.

$Date$

Date and time of check-in.

$Header$

A title that includes the RCS file's full pathname, revision number, date, author, state, and (if locked) the person who locked the file.

$Id$

Same as $Header$, but exclude the full pathname of the RCS file.

$Locker$

Username of person who locked the revision. If the file isn't locked, this value is empty.

$Log$

The message that was typed during check-in to describe the file, preceded by the RCS filename, revision number, author, and date. Log messages accumulate rather than being overwritten.

RCS uses the "comment leader" of the $Log$ line for the log messages left in the file. The comment leader stored in the RCS file is useful only for exchanging files with older versions of RCS.

$Name$

The symbolic name used to check in the revision, if any.

$RCSfile$

The RCS filename, without its pathname.

$Revision$

The assigned revision number.

$Source$

The RCS filename, including its pathname.

$State$

The state assigned by the -s option of ci or rcs.

Example Values

Let's assume that the file /projects/new/mydata has been checked in and out by a user named arnold. Here's what keyword substitution produces for each keyword, for the second revision of the file:

    $Author: arnold $

    $Date: 2004/08/05 10:32:27 $

    $Header: /projects/new/RCS/mydata,v 1.2 2004/08/05 10:32:27 arnold Exp arnold $

    $ID$

    $Locker: arnold $

    $Log: mydata,v
    Revision 1.2  2004/08/05 10:32:27  arnold
    Added more important information.

    Revision 1.1  2004/08/05 10:31:44  arnold
    Initial revision

    $Name:  $

    $RCSfile: mydata,v $

    $Revision: 1.2 $

    $Source: /projects/new/RCS/mydata,v $

    $State: Exp $

    Test data file.
    This second line is very important.

Revision Numbering

Unless told otherwise, RCS commands typically operate on the latest revision. Some commands have a -r option that specifies a revision number. In addition, many options accept a revision number as an optional argument. (In the command summary, this argument is shown as [R ].) Revision numbers consist of up to four fields: release, level, branch, and sequence, but most revisions consist of only the release and level. For example, you can check out revision 1.4 as follows:

    co -l -r1.4 ch01

When you check it in again, the new revision will be marked as 1.5. Now suppose the edited copy needs to be checked in as the next release. You would type:

    ci -r2 ch01

This creates revision 2.1. (Revision numbers always start at one, not at zero.) You can also create a branch from an earlier revision. The following command creates revision 1.4.1.1:

    ci -r1.4.1 ch01

Numbers that begin with a period are considered to be relative to the default branch of the RCS file. Normally, this is the "trunk" of the revision tree.

Numbers are not the only way to specify revisions, though. You can assign a text label as a revision name, using the -n option of ci or rcs. You can also specify this name in any option that accepts a revision number for an argument. For example, you could check in each of your C files, using the same label regardless of the current revision number:

    ci -u -nPrototype *.c

In addition, you may specify a $, which means the revision number extracted from the keywords of a working file. For example:

    rcsdiff -r$ ch01

compares ch01 to the revision that is checked in. You can also combine names and symbols. The command:

    rcs -nDraft:$ ch*

assigns a name to the revision numbers associated with several chapter files. (These last two examples require that the file contain a $ID$ line.)

Specifying the Date

Revisions are timestamped by time and date of check-in. Several keyword strings include the date in their values. Dates can be supplied in options to ci, co, and rlog. RCS uses the following date format as its default:

    2000/01/10 02:00:00     Year/month/day  time

The default time zone is Greenwich Mean Time (GMT), which is also referred to as Coordinated Universal Time (UTC) . Dates can be supplied in free format. This lets you specify many different styles. Here are some of the more common ones, which show the same time as in the previous example:

    6:00 pm lt              Assuming today is Jan. 10, 2000
    2:00 AM, Jan. 10, 2000
    Mon Jan 10 18:00:00 2000 LT
    Mon Jan 10 18:00:00 PST 2000

The uppercase or lowercase "lt" indicates local time (here, Pacific Standard Time). The third line shows ctime format (plus the "LT"); the fourth line is the date command format.

Specifying States

In some situations, particularly programming environments, you want to know the status of a set of revisions. RCS files are marked by a text string that describes their state. The default state is Exp (experimental). Other common choices include Stab (stable) or Rel (released). These words are user-defined and have no special internal meaning. Several keyword strings include the state in their values. In addition, states can be supplied in options to ci, co, rcs, and rlog.

Standard Options and Environment Variables

RCS defines an environment variable, RCSINIT, which sets up default options for RCS commands. If you set RCSINIT to a space-separated list of options, they will be prepended to the command-line options that you supply to any RCS command.

Six options are useful to include in RCSINIT: -q, -V, -V n, -T, -x, and -z. They can be thought of as standard options because most RCS commands accept them.

-q[ R ]

Quiet mode; don't show diagnostic output. R specifies a file revision.

-T

If the file with the new revision has a later modification time than that of the RCS file, update the RCS file's modification time. Otherwise, preserve the RCS file's modification time. This option should be used with care; see the discussion in the ci manpage for more detail.

-V

Print the RCS version number.

-V n

Emulate version n of RCS; useful when trading files between systems that run different versions. n can be 3, 4, or 5.

-x suffixes

Specify an alternate list of suffixes for RCS files. Each suffix is separated by a /. On Unix systems, RCS files normally end with the characters ,v. The -x option provides a workaround for systems that don't allow a comma character in filenames.

-z timezone

timezone controls the output format for dates in keyword substitution. timezone should have one of the following values:

Value

Effect

empty

Default format: UTC with no time zone and slashes separating the parts of the date.

LT

The local time and date, in ISO-8601 format, with time-zone indication (YYYY - MM-DD HH : MM : SS - ZZ).

±hh : mm

With a numeric offset from UTC, the output is in ISO-8601 format.

For example, when depositing a working file into an RCS file, the command:

    ci -x,v/ ch01    Second suffix is blank

searches in order for the RCS filenames:

    RCS/ch01,v
    ch01,v
    RCS/ch01

RCS allows you to specify a location for temporary files. It checks the environment variables TMPDIR, TMP, and TEMP, in that order. If none of those exist, it uses a default location, such as /tmp.

Alphabetical Summary of Commands

For details on the syntax of keywords, revision numbers, dates, states, and standard options, refer to the previous discussions.

Name

ci

Synopsis

ci [options]files

Check in revisions. ci stores the contents of the specified working files into their corresponding RCS files. Normally, ci deletes the working file after storing it. If no RCS file exists, the working file is an initial revision. In this case, the RCS file is created, and you are prompted to enter a description of the file. If an RCS file exists, ci increments the revision number and prompts you to enter a message that logs the changes made. If a working file is checked in without changes, the file reverts to the previous revision.

The two mutually exclusive options -u and -l, along with -r, are the most common. Use -u to keep a read-only copy of the working file (for example, so the file can be compiled or searched). Use -l to update a revision and then immediately check it out again with a lock. This allows you to save intermediate changes but continue editing (for example, during a long editing session). Use -r to check in a file with a different release number. ci accepts the standard options -q, -V, -V n, -T, -x, and -z.

Options

-d[ date ]

Check the file in with a timestamp of date or, if no date is specified, with the time of last modification.

-f[ R ]

Force a check-in even if there are no differences.

-i[ R ]

Initial check-in, report an error if the RCS file already exists.

-I[ R ]

Interactive mode; prompt user even when standard input is not a terminal (e.g., when ci is part of a command pipeline).

-j[ R ]

Just check in and do not initialize. Report an error if the RCS file does not already exist.

-k[ R ]

Assign a revision number, creation date, state, and author from keyword values that were placed in the working file, instead of computing the revision information from the local environment. -k is useful for software distribution: the preset keywords serve as a timestamp shared by all distribution sites.

-l[ R ]

Do a co -l after checking in. This leaves a locked copy of the next revision.

-m msg

Use the msg string as the log message for all files checked in. When checking in multiple files, ci normally prompts whether to reuse the log message of the previous file. -m bypasses this prompting.

-M[ R ]

Set the working file's modification time to that of the retrieved version. Use of -M can confuse make and should be used with care.

-n name

Associate a text name with the new revision number.

-N name

Same as -n, but override a previous name.

-r R

Check the file in as revision R.

-r

Without a revision number, -r restores the default behavior of releasing a lock and removing the working file. It is intended to override any default -l or -u set up by aliases or scripts. The behavior of -r in ci is different from most other RCS commands.

-s state

Set the state of the checked-in revision.

-t file

Replace RCS file description with contents of file. This works only for initial check-in.

-t- string

Replace RCS file description with string. This works only for initial check-in.

-u[ R ]

Do a co -u after checking in. This leaves a read-only copy.

-w user

Set the author field to user in the checked-in revision.

Examples

Check in chapter files using the same log message:

    ci -m'First round edits' chap*

Check in edits to prog.c, leaving a read-only copy:

    ci -u prog.c

Start revision level 2; refer to revision 2.1 as "Prototype":

    ci -r2 -nPrototype prog.c

Name

co

Synopsis

co [options]files

Retrieve (check out) a previously checked-in revision and place it in the corresponding working file (or print to standard output if -p is specified). If you intend to edit the working file and check it in again, specify -l to lock the file. co accepts the standard options -q, -V, -V n, -T, -x, and -z.

Options

-d date

Retrieve latest revision whose check-in timestamp is on or before date.

-f[ R ]

Force the working file to be overwritten.

-I[ R ]

Interactive mode; prompt user even when standard input is not a terminal.

-jR2:R3[,...]

This works like rcsmerge. R2 and R3 specify two revisions whose changes are merged into a third file: either the corresponding working file or a third revision (any R specified by other co options). Multiple comma-separated pairs may be provided; the output of the first join becomes the input of the next. See the co manpage for more details.

-k c

Expand keyword symbols according to flag c. c can be:

b

Like -ko, but uses binary I/O. This is most useful on non-Unix systems.

kv

Expand symbols to keyword and value (the default). Insert the locker's name only during a ci -l or co -l.

kvl

Like kv, but always insert the locker's name.

k

Expand symbols to keywords only (no values). This is useful for ignoring trivial differences during file comparison.

o

Expand symbols to keyword and value present in previous revision. This is useful for binary files that don't allow substring changes.

v

Expand symbols to values only (no keywords). This prevents further keyword substitution and is not recommended.

-l[ R ]

Same as -r, but also lock the retrieved revision.

-M[ R ]

Set the working file's modification time to that of the retrieved version. Use of -M can confuse make and should be used with care.

-p[ R ]

Send retrieved revision to standard output instead of to a working file. Useful for output redirection or filtering.

-r[ R ]

Retrieve the latest revision or, if R is given, retrieve the latest revision that is equal to or lower than R. If R is $, retrieve the version specified by the keywords in the working file.

-s state

Retrieve the latest revision having the given state.

-u[ R ]

Same as -r, but also unlock the retrieved revision if you locked it previously.

-w[ user ]

Retrieve the latest revision that was checked in either by the invoking user or by the specified user.

Examples

Sort the latest stored version of file :

    co -p file | sort

Check out (and lock) all files whose names start with an uppercase letter for editing:

    co -l [A-Z]*

Note that filename expansion fails unless a working copy resides in the current directory. Therefore, this example works only if the files were previously checked in via ci -u. Finally, here are some different ways to extract the working files for a set of RCS files (in the current directory):

    co -r3 *,v                   Latest revisions of release 3
    co -r3 -wjim *,v             Same, but only if checked in by jim
    co -rPrototype *,v           Latest revisions named Prototype
    co -d'May 5, 2 pm LT' *,v    Latest revisions that weremodified on or before the date

Name

ident

Synopsis

ident [options] [files]

Extract keyword/value symbols from files. files can be text files, object files, or dumps. ident accepts the standard option -V.

Options

-q

Suppress warning message when no keyword patterns are found.

-V

Print the version number of ident.

Examples

If file prog.c is compiled, and it contains this line of code:

    char  rcsID[   ] =  "$Author:  arnold  $";

the following output is produced:

    $ ident prog.c prog.o
    prog.c:
         $Author: arnold $
    prog.o:
         $Author: arnold $

Show keywords for all RCS files (suppress warnings):

    co -p RCS/*,v | ident -q

Name

merge

Synopsis

merge [options] [diff3 options]file1 file2 file3

Perform a three-way merge of files (via diff3) and place changes in file1. file2 is the original file. file1 is the "good" modification of file2. file3 is another, conflicting modification of file2. merge finds the differences between file2 and file3, and then incorporates those changes into file1. If both file1 and file3 have changes to common lines, merge warns about overlapping lines and inserts both choices in file1. The insertion appears as follows:

    <<<<<<< file1
                     lines from file1
    ========
    lines from file3
    >>>>>>>file3

You'll need to edit file1 by deleting one of the choices. merge exits with a status of 0 (no overlaps), 1 (some overlaps), or 2 (unknown problem). See also rcsmerge.

merge accepts the -A, -e, and -E options for diff3, and simply passes them on, causing diff3 to perform the corresponding kind of merge. See the entry for diff3 in Chapter 2 for details. (The -A option is for the GNU version of diff3.)

Options

-L label

This option may be provided up to three times, supplying different labels in place of the filenames file1, file2, and file3, respectively.

-p

Send merged version to standard output instead of to file1.

-q

Produce overlap insertions but don't warn about them.

Name

rcs

Synopsis

rcs [options]files

An administrative command for setting up or changing the default attributes of RCS files. rcs requires you to supply at least one option. (This is for "future expansion.")

Among other things, rcs lets you set strict locking (-L), delete revisions (-o), and override locks set by co (-l and -u). RCS files have an access list (created via -a); anyone whose username is on the list can run rcs. The access list is often empty, meaning that rcs is available to everyone. In addition, you can always invoke rcs if you own the file, if you're a privileged user, or if you run rcs with -i. rcs accepts the standard options -q, -V, -V n, -T, -x, and -z.

Options

-a users

Append the comma-separated list of users to the access list.

-A otherfile

Append otherfile's access list to the access lists of files.

-b[ R ]

Set the default branch to R or, if R is omitted, to the highest branch on the trunk.

-c ' s '

The comment leader for $Log$ keyword is set to string s. You could, for example, set s to .\" for troff files or set s to * for C programs. (You would need to manually insert an enclosing /* and */ before and after $Log$.)

-c is obsolescent; RCS uses the character(s) preceding $Log$ in the file as the comment leader for log messages. You may wish to set this, though, if you are accessing the RCS file with older versions of RCS.

-e[ users ]

Erase everyone (or only the specified users) from the access list.

-i

Create (initialize) an RCS file, but don't deposit a revision.

-I

Interactive mode; prompt user even when standard input is not a terminal.

-k c

Use c as the default style for keyword substitution. (See co for values of c.) -kkv restores the default substitution style.

-l[ R ]

Lock revision R or the latest revision. -l "retroactively locks" a file and is useful if you checked out a file incorrectly by typing co instead of co -l. rcs will ask you if it should break the lock if someone else has the file locked.

-L

Turn on strict locking (the default). This means that everyone, including the owner of the RCS file, must use co -l to edit files. Strict locking is recommended when files are to be shared. (See -U.)

-m R : msg

Use the msg string to replace the log message of revision R.

-M

Do not send mail when breaking a lock. This is intended for use by RCS frontends, not for direct use by users!

-n flags

Add or delete an association between a revision and a name. flags can be:

name : R

Associate name with revision R.

name :

Associate name with latest revision.

name

Remove association of name.

-N flags

Same as -n, but overwrite existing names.

-o R_list

Delete (outdate) revisions listed in R_list. R_list can be specified as: R1, R1:R2, R1 :, or :R2. When a branch is given, -o deletes only the latest revision on it. The - range separator character from RCS versions prior to 5.6 is still valid.

-s state [ : R ]

Set the state of revision R (or the latest revision) to the word state.

-t[ file ]

Replace RCS file description with contents of file or, if no file is given, with standard input.

-t- string

Replace RCS file description with string.

-u[ R ]

The complement of -l: unlock a revision that was previously checked out via co -l. If someone else did the check-out, you are prompted to state the reason for breaking the lock. This message is mailed to the original locker.

-U

Turn on nonstrict locking. Everyone except the file owner must use co -l to edit files. (See -L.)

Examples

Associate the label To_customer with the latest revision of all RCS files:

    rcs -nTo_customer: RCS/*

Add three users to the access list of file beatle_deals:

    rcs -ageorge,paul,ringo beatle_deals

Delete revisions 1.2 through 1.5:

    rcs -o1.2:1.5 doc

Replace an RCS file description with the contents of a variable:

    echo "$description" | rcs -t file

Name

rcsclean

Synopsis

rcsclean [options] [files]

Although included with RCS, this command is optional and might not be installed on your system. rcsclean compares checked-out files against the corresponding latest revision or revision R (as given by the options). If no differences are found, the working file is removed. (Use rcsdiff to find differences.) rcsclean is useful in makefiles; for example, you could specify a "clean-up" target to update your directories. rcsclean is also useful prior to running rcsfreeze. rcsclean accepts the standard options -q, -V, -V n, -T, -x, and -z.

Options

-k c

When comparing revisions, expand keywords using style c. (See co for values of c.)

-n[ R ]

Show what would happen but don't actually execute.

-r[ R ]

Compare against revision R. R can be supplied as arguments to other options, so -r is redundant.

-u[ R ]

Unlock the revision if it's the same as the working file.

Example

Remove unchanged copies of program and header files:

    rcsclean *.c *.h

Name

rcsdiff

Synopsis

rcsdiff [options] [diff_options]files

Compare revisions via diff. Specify revisions using -r as follows:

# of revisions

Comparison made

None

Working file against latest revision.

One

Working file against specified revision.

Two

One revision against the other.

rcsdiff accepts the standard options -q, -V, -Vn, -T, -x, and -z, as well as diff_options, which can be any valid diff option. rcsdiff exits with a status of 0 (no differences), 1 (some differences), or 2 (unknown problem). The -c and -u options to diff can be very useful with rcsdiff.

rcsdiff prints "retrieving revision ..." messages to standard error, as well as a line of equals signs for separating multiple files. It is often useful to redirect standard error and standard output to the same file.

Options

-k c

When comparing revisions, expand keywords using style c. (See co for values of c.)

-r R1

Use revision R1 in the comparison.

-r R2

Use revision R2 in the comparison. (-r R1 must also be specified.)

Examples

Compare the current working file against the last checked-in version:

    rcsdiff -c ch19.sgm 2>&1 | more

Compare the current working file against the very first version:

    rcsdiff -c -r1.1 ch19.sgm 2>&1 | more

Compare two earlier versions of a file against each other:

    rcsdiff -c -r1.3 -r1.4 ch19.sgm 2>&1 | more

Name

rcsfreeze

Synopsis

rcsfreeze [name]

Although included with RCS, this shell script is optional and might not be installed on your system. rcsfreeze assigns a name to an entire set of RCS files, which must already be checked in. This is useful for marking a group of files as a single configuration. The default name is C_ n, where n is incremented each time you run rcsfreeze.

Name

rcsmerge

Synopsis

rcsmerge [options] [diff3 options]file

Perform a three-way merge of file revisions, taking two differing versions and incorporating the changes into the working file. You must provide either one or two revisions to merge (typically with -r). Overlaps are handled the same as with merge, by placing warnings in the resulting file. rcsmerge accepts the standard options -q, -V, -V n, -T, -x, and -z. rcsmerge exits with a status of 0 (no overlaps), 1 (some overlaps), or 2 (unknown problem).

rcsmerge accepts the -A, -e, and -E options for diff3 and simply passes them on, causing diff3 to perform the corresponding kind of merge. See merge, and also see the entry for diff3 in Chapter 2 for details. (The -A option is for the GNU version of diff3.)

Options

-k c

When comparing revisions, expand keywords using style c. (See co for values of c.)

-p[ R ]

Send merged version to standard output instead of overwriting file.

-r[ R ]

Merge revision R or, if no R is given, merge the latest revision.

Examples

Suppose you need to add updates to an old revision (1.3) of prog.c, but the current file is already at revision 1.6. To incorporate the changes:

    $ co -l prog.c
                     Get latest revision
                         (Edit latest revision by adding updates for revision 1.3, then:)
    $rcsmerge -p -r1.3 -r1.6 prog.c > prog.updated.c

Undo changes between revisions 3.5 and 3.2, and overwrite the working file:

    rcsmerge -r3.5 -r3.2 chap08

Name

rlog

Synopsis

rlog [options]files

Display identification information for RCS files, including the log message associated with each revision, the number of lines added or removed, date of last check-in, etc. With no options, rlog displays all information. Use options to display specific items. rlog accepts the standard options -q, -V, -V n, -T, -x, and -z.

Options

-b

Prune the display; print information only about the default branch.

-d dates

Display information for revisions whose check-in timestamp falls in the range of dates (a list separated by semicolons). Be sure to use quotes. Each date can be specified as:

d1 < d2

Select revisions between date d1 and d2, inclusive.

d1 <

Select revisions made on or after date1.

d1 >

Select revisions made on or before date1.

Timestamp comparisons are strict. If two files have exactly the same time, < and > won't work. Use <= and >= instead.

-h

Display the beginning of the normal rlog listing.

-l[ users ]

Display information only about locked revisions or, if users is specified, only about revisions locked by the list of users.

-L

Skip files that aren't locked.

-N

Don't print symbolic names.

-r[ list ]

Display information for revisions in the comma-separated list of revision numbers. If no list is given, the latest revision is used. Items can be specified as:

R1

Select revision R1. If R1 is a branch, select all revisions on it.

R1.

If R1 is a branch, select its latest revision.

R1 : R2

Select revisions R1 through R2.

: R1

Select revisions from beginning of branch through R1.

R1 :

Select revisions from R1 through end of branch.

The - range separator character from RCS versions prior to 5.6 is still valid.

-R

Display only the name of the RCS file.

-s states

Display information for revisions whose state matches one from the comma-separated list of states.

-t

Same as -h, but also display the file's description.

-w[ users ]

Display information for revisions checked in by anyone in the comma-separated list of users. If no users are supplied, assume the name of the invoking user.

Examples

Display the revision histories of all your RCS files:

    rlog RCS/*,v | more

Display names of RCS files that are locked by user arnold:

    rlog -R -L -larnold RCS/*

Display the "title" portion (no revision history) of a working file:

    rlog -t calc.c

Chapter 14. The Concurrent Versions System

This chapter is a comprehensive reference of all CVS commands, with a brief summary of what each does. It is intended to be useful as a quick reference, not as a tutorial.

This chapter covers the following topics:

Conceptual overview

Command-line syntax and options

CVS dot files

Environment variables

Keywords and keyword modes

Dates

CVSROOT variables

Alphabetical summary of commands

Most of the material in this chapter is adapted from Essential CVS, which is cited in the Bibliography. See that book for much more information on CVS. The Internet starting point for CVS is http://www.cvshome.org/.

Conceptual Overview

The basic concepts for source code management systems were presented earlier in Chapter 12. As described there, CVS is a distributed source code management system based on the "copy, modify, merge" model. It uses RCS format files for storing data in its repository and is currently the most popular source code management suite for Unix and Unix-like systems.

Table 14-1 is a quick-start guide to using CVS. You would use the commands in the order shown to create and start using a CVS repository. (The basic steps for the Subversion source code management system are shown in more detail in the section "Using Subversion: A Quick Tour" in Chapter 15. Using CVS is similar.)

Table 14-1. CVS commands quick-start guide

Command

Purpose

mkdir /path/to/repos

Make the repository directory.

cvs init /path/to/repos

Initialize the repository.

cvs import ...

Import the initial version of a project into the repository.

cvs checkout ...

Create a sandbox.

cvs diff ...

Compare the sandbox to the repository, or different versions in the repository.

cvs status

Check if files have changed in the sandbox or the repository.

cvs update

Download changes from the repository to the sandbox.

cvs commit

Upload changes from the sandbox to the repository.

CVS Wrappers

When resolving conflicts, the usual method CVS uses is MERGE, which means that CVS puts both versions of the conflicting group of lines into the file, surrounded by special markers. However, this method doesn't work for binary files. Thus the second conflict-resolution method is COPY, which presents both versions of the file to the user for manual resolution.

You can manually specify the conflict resolution method and keyword expansion method when a file is added to a repository, as well as later, after the file is already there. However, doing so manually for lots of files is painful and error-prone. Wrappers allow you to specify the conflict resolution method and keyword expansion method for groups of files, based on filename patterns. You may do this on the command line, or more conveniently, by placing the wrappers into a .cvswrappers file. Each line has the following format:

wildcard option 'value' [option 'value' ...]

The wildcard is a shell-style wildcard pattern. If option is -m, it indicates the conflict resolution method. In this case, value should be either MERGE or COPY. If option is -k, then value is one of the keyword resolution modes (b, k, o, etc.).

Stickiness

When some aspect of the persistent state of a file in a sandbox is different from that of the file in the repository, that aspect is said to be sticky. For example, when a file is retrieved based on a specific date, tag, or revision, those attributes are sticky. Similarly, when a file in a sandbox belongs to a branch, the branch is said to be sticky, and if the keyword expansion mode is set on a file, that mode is also sticky. Entire directories may be marked as sticky, not just individual files.

These attributes are termed "sticky" because the state of the file becomes persistent. In particular, a cvs update does not update such files to the latest revision in the repository. Similarly, you cannot use cvs commit to make such a file become the head of a branch or the trunk in the repository. Finally, when a file is on a sticky branch, it can only be committed on that branch. cvs status shows the stickiness of various attributes.

This all makes sense: work on a branch should be done only on that branch. When work on the branch is finished, the branch's changes should be merged into the files on the trunk, instead of checking the files into the head of the trunk directly.

Stickiness is created or changed using the -D, -k or -r options to cvs checkout and cvs update. Use cvs update -A to remove stickiness. You must use this command on a sticky directory directly; applying it just to all the contained files in the directory is not enough.

See Chapter 4 in Essential CVS for more details.

Command-Line Syntax and Options

CVS supports a number of command-line options that you can use to control various aspects of CVS behavior. Each CVS subcommand has its own options, as well.

The syntax of any CVS command is as follows:

    cvs [cvs-options] [command] [command-options-and-arguments]

The cvs-options modify the behavior of the main CVS code, rather than the code for a specific command.

cvs Options

Options to the cvs command are supplied before the particular subcommand to be executed. This section focuses on options that you pass to the cvs executable itself, not to any specific CVS command. The following options are valid:

-a

Authenticate all network traffic. Without this option, the initial connection for the command is authenticated, but later traffic along the same data stream is assumed to be from the same source.

This option is available only with GSS-API connections, but if you use ssh as your rsh replacement in the ext connection mode, ssh authenticates the data stream.

This option is supported if it is listed in cvs --help-options. The command-line client can be compiled to support it by using the --enable-client option to the configure script.

--allow-root= directory

Used as part of the inetd command string for the server, kserver, and pserver connection methods. The directory is the repository root directory that the server allows connections to. Using --allow-root more than once in a command allows users to connect to any of the specified repositories.

-d repository_path

Use repository_path as the path to the repository root directory. This option overrides both the CVSROOT environment variable and the contents of the Root file in the sandbox's CVS subdirectory. It also overrides the contents of the .cvsrc file.

The syntax for the repository path is:

    [:method:][[[user][:password]@]hostname[:[port]]]/path

See Essential CVS for a full explanation of each element of the repository path.

-e editor

Use the specified editor when CVS calls an editor for log information during the commit or import process. This option overrides the EDITOR, CVSEDITOR, and VISUAL environment variables and the contents of the .cvsrc file.

-f

Prevent CVS from reading the ~/.cvsrc file and using the options in it.

-H, --help

If called as cvs -H or cvs --help, CVS displays a general CVS help message.

If called as cvs -H command or cvs --help command, CVS displays the available options and help information for the specified command.

--help-commands

List the available CVS commands with brief descriptions of their purposes.

--help-options

List the available cvs-options with brief descriptions of their purposes.

--help-synonyms

List the valid synonyms (short names) for the CVS commands.

-l

Do not log the current command to the history file in the repository's CVSROOT directory. The command will not show in subsequent cvs history output.

-n

Execute only commands that do not change the repository. Using this option with cvs update can provide a status report on the current sandbox.

-q

Run in quiet mode. This option causes CVS to display only some of the informational messages.

-Q

Run in very quiet mode. This option causes CVS to display only the most critical information.

-r

Set files checked out to the sandbox as read-only. This option only sets newly checked-out files. If a file is being watched with cvs watch, read-only is the default. This option overrides settings in the .cvsrc file.

-s variable = value

Set a user variable for use with one of the scripting files in CVSROOT. The user variables are explained in the later section "CVSROOT Variables."

-t

Display messages that trace the execution of the command. This option can be used with -n to determine precisely what a command does.

-T directory

Use the named directory to store temporary files. This option overrides environment variables or settings in the .cvsrc file.

-v, --version

Display CVS version and copyright information.

-w

Set files checked out to the sandbox as readable and writable. This option only sets the permissions of newly checked-out files. This option overrides the CVSREAD environment variable and it overrides settings in the .cvsrc file.

-x

Encrypt all data that travels across the network between the client and the server. This option is currently available in GSS-API or Kerberos mode only, but if you use ssh as your rsh replacement in the ext connection mode, ssh encrypts the data stream.

This option is available only if the client supports it. It is supported if it is listed in cvs --help-options. You can compile the command-line client to support it by using the --enable-client and --enable-encryption options to the configure script.

-z N

Compress all network traffic by using the specified gzip compression level N. The compression levels range from 0 (no compression) to 9 (maximum compression). This option overrides settings in the .cvsrc file.

This option is available only if the client supports it. It is supported if it is listed in cvs --help-options. You can compile the command-line client to support it by using the --enable-client option to the configure script.

Common Subcommand Options

Many of the CVS subcommands (add, commit, and so on) share a large number of common options. They are described here.

-d directory-name

Check out or update a sandbox into a directory called directory-name instead of using the repository directory name or the name designated in the modules file in the repository's CVSROOT directory. This is particularly useful when creating a second sandbox for a project.

CVS usually creates the same directory structure that the repository uses. However, if the checkout parameter contains only one file or directory and the -d option is used, CVS does not create any intervening directories. Use -N to prevent CVS from shortening the path.

-D date

Run the subcommand on the latest revision of a file that is as old as or older than the date or time specified by date.

-f

Use the latest (HEAD) revision of a file that is on the current branch or trunk if no revision matches a specified date or revision number. This option applies only if -r or -D is used.

-k mode

Specify the keyword expansion mode to be mode. For cvs add, this option also sets the default keyword mode for the file. If you forget to set the default keyword mode with cvs add, you can do so later with cvs admin. The keyword-expansion modes are listed in the later section "Keywords and Keyword Modes."

-l

Run the subcommand on the files in the local directory only. (Do not recurse into subdirectories.) See also -R.

-m message

Use the specified message as the description of the newly added file or as the description of the change made.

-n

Do not run any program listed in the modules file for this directory.

-N

Do not shorten the path. CVS usually creates the same directory structure that the repository uses. However, if the checkout parameter contains only one file and the -d option is used, CVS does not create any intervening directories unless -N is also specified.

-r revision

Run the subcommand on the specified revision or tag of a file. If this option refers to a branch, run the command on the latest (HEAD) revision of the branch.

-R

Run the subcommand on the files in the local directory and all subdirectories and recurse down the subdirectories. This option is generally the default. See also -l.

Dot Files

In client/server mode, all the dot files other than .rhosts should be on the client computer. The .rhosts file should be in the user's home directory on the server computer.

These are the dot files in the sandbox directory:

.cvsignore

Contains a list of files CVS should not process. The format is one or more lines, with whitespace-separated filenames or shell wildcard patterns matching files that CVS should ignore when producing informational messages, and during commit, update, or status operations. A single ! causes CVS to empty out its ignore list and start over again with subsequent filenames or patterns. The file may be checked into CVS.

.# filename . revision

If a project file that is not fully synchronized with the repository is overwritten by CVS, the original file is stored as .# filename . revision, where revision is the BASE revision of the file.

These are the dot files in a user's home directory:

.cvsignore

Contains a list of files CVS should not process. See the earlier description.

.cvspass

Used in pserver remote-access mode. This file contains the user's password for each repository the user is logged into, stored in a simple form of encoding. Be aware that the file is human-readable and that the passwords are easy to decrypt.

.cvsrc

Contains a list of CVS commands and the options the user wants as default options for those commands.

.cvswrappers

Contains a list of wrappers that affect how a file is stored. The wrappers include a pattern that CVS matches against filenames and a keyword-expansion mode that CVS applies to any file whose name matches the pattern.

.rhosts

Used when connecting with rsh. This file should be in the user's home directory on the server machine, and it should contain the client 's computer and username.

Warning

The rsh command is terribly, terribly insecure. You should avoid it completely; use ssh instead.

Environment Variables

Several environment variables affect CVS. Some are read only when CVS is the client, and some are read only when CVS is the server. When the repository resides on the local machine, both sets are read.

Client Environment Variables

The environment variables in the following list are read and used by the process that runs on the client computer and must be in the calling user's environment:

CVS_CLIENT_LOG

Used for debugging CVS in client/server mode. If set, everything sent to the server is stored in the $CVS_CLIENT_LOG.in file, and everything received by the client is stored in $CVS_CLIENT_LOG.out.

CVS_CLIENT_PORT

Used to set the port the client uses to connect to the CVS server in kserver, gserver, and pserver modes. By default, the client uses port 2401 (gserver and pserver) or port 1999 (kserver) to connect to the server.

CVSIGNORE

A whitespace-separated list of filename patterns that should be ignored. See the description of the .cvsignore file, earlier in this chapter.

CVSEDITOR, EDITOR, VISUAL

Used to set the editor CVS calls when it opens an editor for log messages. On Unix and GNU/Linux systems, the default editor is vi. Using CVSEDITOR is preferred over EDITOR and VISUAL, as other variables may be used by other programs.

CVS_PASSFILE

Used to change the file CVS uses to store and retrieve the password in pserver remote-access mode. The default file is $HOME/.cvspass.

CVSREAD

If set to 1, CVS tries to check out your sandbox in read-only mode. (CVS actually checks whether this variable is nonnull, so it works regardless of the setting. This behavior may change in the future.)

CVSROOT

Contains the full pathname of the CVS repository. When you're working in a sandbox, this variable is not needed. If you're working outside a sandbox, either this variable must be present or the -d repository_path option must be used.

CVS_RSH

Used to set the program CVS calls to connect to a remote repository in ext mode. The default program is rsh.

Warning

The rsh command is terribly, terribly insecure. You should avoid it completely; use ssh instead.

CVS_SERVER

If connecting to a CVS server using rsh, this variable is used to determine which program is started on the server side. In ext and server modes, this defaults to cvs. When the repository is on the local system, this defaults to the path to the CVS client program.

CVSWRAPPERS

May contain no more than one wrapper, as explained in the earlier section "CVS Wrappers."

HOME, HOMEPATH, HOMEDRIVE

Used to determine where the user's home directory is, to enable CVS to locate its files. On Unix, GNU/Linux, and related systems, only HOME is used. On Windows systems, HOMEDRIVE and HOMEPATH are used. Some Windows operating systems (Windows NT, 2000, and XP) set these variables automatically. If yours doesn't, HOMEDRIVE should be set to the drive letter (e.g., C:) and HOMEPATH should be set to the path (e.g., \home\arnold).

PATH

Used to locate any programs whose path is not compiled with the CVS program. This variable is still used, but it is less important now that the rcs, diff, and patch programs CVS uses are all distributed with CVS.

Server Environment Variables

The following variables are read when CVS is operating as the server (or when the repository is on the local system). They must be in the calling user's environment on the server computer.

CVS_SERVER_SLEEP

Used only when debugging the server in client/server mode. This variable delays the start of the server process by CVS_SERVER_SLEEP seconds to allow the debugger to be attached to it.

CVSUMASK

Used to set the default permissions of files in the repository. This variable may be added to the client code in a later version of CVS .

PATH

Used to locate any programs whose path is not compiled with the CVS program. This variable is still used, but it is less important now that the rcs, diff, and patch programs CVS uses are all distributed with CVS.

TMPDIR

Sets the temporary directory CVS stores data in. This variable defaults to /tmp.

CVS creates temporary files with mkstemp (BSD 4.3), if possible. If mkstemp is not available when CVS is compiled, it tries tempnam (SVID 3), mktemp (BSD 4.3), or tmpnam (POSIX), in that order. If it uses tmpnam, it cannot use the TMPDIR environment variable and files are created in /tmp.

Keywords and Keyword Modes

CVS contains keywords that can be included in nonbinary project files. When CVS finds a keyword in a file it is checking out, it expands the keyword to provide metadata about the latest revision of the file. You can set keyword-expansion modes on a file to tell CVS whether (and how) to expand the keywords it finds.

Keyword-expansion modes also control line-ending conversion. Unix, Macintosh, and Windows operating systems use different sets of codes to signal the ends of lines. (GNU/Linux uses the same codes as Unix.) When you commit a file from an operating system that doesn't use Unix line endings, CVS converts the line endings to Unix style. If you are storing binary files, this conversion can corrupt the file. Use the -kb keyword-expansion mode to tell CVS not to convert line endings.

CVS keywords take the form:

    $Keyword$

All keywords except Log expand to the format:

    $Keyword: value$

These are the keywords and the information they show about the file they are in:

Author

The username of the user who committed the last revision.

Date

The date on which the last revision was committed, in UTC.

Header

A header containing information about the file, including the author, date and revision number, path and filename of the RCS file (project file in the repository), file status, and whether the file is locked.

Id

A header like the one given by the Header keyword, without the path of the RCS file.

Locker

The username of the user who locked the file with cvs admin -l (empty if the file is not locked).

Log

The commit messages, dates, and authors for the file. This keyword instructs CVS to store this information in the file itself. Any characters that prefix the keyword are also used to prefix log lines; this enables comment markers to be included automatically. Unlike most keywords, existing log expansions are not overwritten with the new ones; the new log expansions are merely prepended to the list.

The Log keyword is best used at the end of a file, to avoid users having to go through all the log messages to get to the important parts of the file.

This feature was inherited from RCS. As such, the log created by the Log keyword does not merge neatly when CVS merges a branch back to the trunk. If your file is likely to be branched and remerged, it is better to use the cvs log command than to store a log within the file.

Tip

The cvs log command displays all the information that the Log keyword provides.

Name

The tag name the file was checked out with. This keyword can display a branch or provide a more meaningful identification of a revision than the revision number alone.

RCSfile

The name of the RCS file (the project file in the repository).

Revision

The CVS internal revision number of the file. This number is specific to the individual file and does not identify a stage within the project.

Source

The name and path of the RCS file (the project file in the repository).

State

The current state assigned to the current revision, set with cvs admin -s. See Chapter 7 in Essential CVS.

The keyword-expansion modes in the following list are used in commands and CVS wrappers to control keyword expansion and line-ending conversion. The syntax differs slightly for each use. In commands, you use the mode without a space between the option and the mode (e.g., -kb). In wrappers, you need a space and may need to quote (e.g., -k 'b').

b

Inhibit keyword expansion and line-ending conversion. Use this keyword-expansion mode to signal that a file is binary. This option is needed because CVS can convert line endings from the form appropriate to the server to the form appropriate to the client. This causes obvious problems when working with binary files.

k

Generate only a keyword name, not a name and value. Use this option when merging different (nonbinary) versions of a file, to prevent keyword substitution from creating spurious merge errors. This option can corrupt binary files.

o

Generate the version of a keyword string that was present just before the current file was last committed, rather than generating a version with the modifications of the last commit. This option is similar to -kb, but with line-ending conversion.

v

Generate only the value of a keyword, rather than the name and value. This is most useful with cvs export, but do not use it for binary files. Once any keyword is removed from a file, further expansions are not possible unless the word is replaced.

kv

Generate the name and value of a keyword. This is the default mode.

kvl

Generate the name and value of a keyword and add the name of the locking user if the revision is locked with cvs admin -l.

Dates

In CVS, all dates and times are processed by a version of the GNU getdate function, which can translate dates and times given in several different formats. Case is always irrelevant when interpreting dates. Spaces are permitted in date strings, but in the command-line client a string with spaces should be surrounded by quotes. If a year is 0 to 99, it is considered to be in the twentieth century.

If a time is not given, midnight at the start of the date is assumed. If a time zone is not specified, the date is interpreted as being in the client's local time zone.

Legal Date Formats

The legal time and date formats for CVS are defined by the ISO 8601 standard and RFC 822 as amended by RFC 1123. Other formats can be interpreted, but CVS is designed to handle only these standards.

ISO 8601

The basic ISO 8601 date format is as follows:

year-month-day hours:minutes:seconds

All values are numbers with leading zeros to ensure that the correct number of digits are used. Hours are given in 24-hour time. This produces the structure YYYY-MM-DD HH:MM:SS, which is internationally acceptable and can be sorted easily. You can use a date, a time, or both.

If you're using ISO 8601 format with the hyphens, the full date is required in CVS. The YYYYMMDD date format is also acceptable and can be abbreviated to YYYYMM or YYYY.

The HH and HH:MM time formats are acceptable. Times can also be specified without the colon, so HHMMSS or HHMM are usable.

Warning

Be aware that HHMM may be misinterpreted as YYYY. Get into the habit of using separators.

In strict ISO 8601 format, a T is required between the date and the time, but CVS understands this format with or without the T. The ISO 8601 standard also states that a Z at the end of the string designates UTC (Universal Coordinated Time), but CVS does not recognize the use of Z.

RFC 822 and RFC 1123

RFCs 822 and 1123 define a precise time format:

    [DDD ,] DD MMM YYYY HH:MM[:SS]ZZZ

These are the terms in the format:

DDD

A three-letter day of the week.

DD

A two-digit date of the month.

MMM

A three-letter month.

YYYY

The year (it must be a four-digit year).

HH

Hours.

MM

Minutes.

SS

Seconds.

ZZZ

The time zone (can be the text abbreviation, a military time zone, or an offset from UTC in hours and minutes).

Legal Date Keywords

CVS also allows short English phrases such as "last Wednesday" and "a month ago" to be used in placed of actual dates. Case is not significant, and CVS can understand plurals. These are the keywords it understands:

Month names

January, February, March, April, May, June, July, August, September, October, November, and December

Month abbreviations

Jan, Feb, Mar, Apr, Jun, Jul, Aug, Sep, Sept, Oct, Nov, and Dec

Days of the week

Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, and Saturday

Day abbreviations

Sun, Mon, Tue, Tues, Wed, Wednes, Thu, Thur, Thurs, Fri, and Sat

Units of time

year, month, fortnight, week, day, hour, minute, min, second, and sec

Relative times

tomorrow, yesterday, today, and now

Meridian qualifiers

am, pm, a.m., and p.m.

Modifiers

a, last, this, next, and ago

Sequences

first, third, fourth, fifth, sixth, seventh, eighth, ninth, tenth, eleventh, and twelfth (second can't be used as a sequence term, because it is used as a time unit)

Time Zones

CVS understands time zones expressed in offsets from UTC, such as +0700 (7 hours ahead) and -1130 (11 hours, 30 minutes behind). The format for these time zones is +HHMM or -HHMM, where + means ahead of UTC and - means behind UTC. CVS also understands time-zone abbreviations and ignores case and punctuation when interpreting them.

Tip

Some of the time-zone abbreviations CVS recognizes are ambiguous. CVS recognizes only one meaning for each of the ambiguous time zones. However, which meaning is recognized may vary depending on your operating system, and on how CVS was configured when it was compiled.

Table 14-2 shows the valid civilian time-zone abbreviations for CVS. Table 14-3 shows military time-zone abbreviations that CVS recognizes.

Table 14-2. Civilian time-zone abbreviations

Abbrev.

Offset/name

gmt

+0000 Greenwich Mean

met

−0100 Middle European

ut

+0000 Coordinated Universal Time

mewt

−0100 Middle European Winter

utc

+0000 Coordinated Universal Time

mest

Middle European Summer

wet

+0000 Western European

swt

−0100 Swedish Winter

bst

+0000 British Summer (ambiguous with Brazil Standard)

sst

Swedish Summer (ambiguous with South Sumatra)

wat

+0100 West Africa

fwt

−0100 French Winter

at

+0200 Azores

fst

French Summer

bst

+0300 Brazil Standard (ambiguous with British Summer)

eet

−0200 Eastern Europe, USSR Zone 1

gst

+0300 Greenland Standard (ambiguous with Guam Standard)

bt

−0300 Baghdad, USSR Zone 2

nft

+0330 Newfoundland

it

−0330 Iran

nst

+0330 Newfoundland Standard (ambiguous with North Sumatra)

zp4

−0400 USSR Zone 3

ndt

Newfoundland Daylight

zp5

−0500 USSR Zone 4

ast

+0400 Atlantic Standard

ist

−0530 Indian Standard

adt

Atlantic Daylight

zp6

−0600 USSR Zone 5

est

+0500 Eastern Standard

nst

−0630 North Sumatra (ambiguous with Newfoundland Summer)

edt

Eastern Daylight

sst

−0700 South Sumatra, USSR Zone 6 (ambiguous with Swedish Summer)

cst

+0600 Central Standard

wast

−0700 West Australian Standard

cdt

Central Daylight

wadt

West Australian Daylight

mst

+0700 Mountain Standard

jt

−0730 Java

mdt

Mountain Daylight

cct

−0800 China Coast, USSR Zone 7

pst

+0800 Pacific Standard

jst

−0900 Japan Standard, USSR Zone 8

pdt

Pacific Daylight

cast

−0930 Central Australian Standard

yst

+0900 Yukon Standard

cadt

Central Australian Daylight

ydt

Yukon Daylight

east

−1000 Eastern Australian Standard

hst

+1000 Hawaii Standard

eadt

Eastern Australian Daylight

hdt

Hawaii Daylight

gst

−1000 Guam Standard, USSR Zone 9 (ambiguous with Greenland Standard)

cat

+1000 Central Alaska

nzt

−1200 New Zealand

ahst

+1000 Alaska-Hawaii Standard

nzst

−1200 New Zealand Standard

nt

+1100 Nome

nzdt

New Zealand Daylight

idlw

+1200 International Date Line West

idle

−1200 International Date Line East

cet

−0100 Central European

Table 14-3. Military time-zone abbreviations

Name

Offset

Name

Offset

Name

Offset

Name

Offset

Name

Offset

a

+0100

f

+0600

l

+1100

q

−0400

v

−0900

b

+0200

g

+0700

m

+1200

r

−0500

w

−1000

c

+0300

h

+0800

n

−0100

s

−0600

x

−1100

d

+0400

i

+0900

o

−0200

t

−0700

y

−1200

e

+0500

k

+1000

p

−0300

u

−0800

z

0000

CVSROOT Variables

The administrative files in CVSROOT can use several types of variables: internal, environment, and shell variables. You can use these variables to pass parameters to the scripts in the scripting files, or you can use them as part of command-line templates.

The internal variables allow you to use information CVS stores about the currently running command. The environment variables are used to access information from the environment the command is running in, and the shell variables are used to access information about the shell.

Environment Variables in CVSROOT Files

Three environment variables are set when CVS runs commands or scripts from CVS administrative files:

CVS_USER

This variable is meaningful only with the pserver access method. It refers to the CVS username provided in the leftmost field of the appropriate line in CVSROOT/passwd. If this username does not exist, the variable expands to an empty string.

LOGNAME, USER

Both of these variables contain the username of the user calling the CVS process.

In the pserver access method, the username is the third field of the line in passwd. If no username is there, the CVS_USER value is used.

Internal Variables in CVSROOT Files

The syntax for referencing a CVS internal variable is ${VARIABLE}. The $VARIABLE syntax can also be used if the character immediately following the variable is neither alphanumeric nor an underscore (_).

These are the internal CVS variables:

CVSROOT

The path to the repository root directory (not the path to the CVSROOT directory within the repository). This variable contains the path only, not any access method or host information.

CVSEDITOR, EDITOR, VISUAL

The editor CVS is using. If you use the -e editor CVS option, CVS uses the editor you specify on the command line. If you don't use -e, CVS reads the environment variables and uses the first editor it finds. CVS uses CVSEDITOR by preference, then EDITOR, then VISUAL.

USER

The username (on the server machine in client/server mode) of the user running CVS.

With the pserver access method, this is the third field of the appropriate line in passwd. If no username is there, it is the name in the leftmost field.

CVS permits user-defined variables that can be passed to administrative files from the client. In the administrative files, reference such a variable with the syntax ${=VARIABLE}. On the command line, use the -s variable=value CVS option to pass the variable to CVS. All strings that contain the $ symbol, other than the variable references, are reserved for CVS internal use. There is no way to escape the $ symbol.

Shell Variables in CVSROOT Files

Two shell variables are also used in the administrative files:

~/

The home directory of the user calling the CVS process.

~ username

The home directory of the user identified as username.

Alphabetical Summary of Commands

Most of your interaction with CVS is through the various CVS subcommands. Even if you use a graphical client, most of the functions the client uses call the CVS subcommands.

Most subcommands have a shortened nickname that you can type instead of the longer subcommand name. These are called command synonyms in CVS jargon.

Name

add

Synopsis

cvs [cvs-options] add [-k mode] [-m message]files

Add a file or directory to the repository. This command can also be used to undo an uncommitted file deletion or to restore a deleted file. You must commit any added files in order for the addition to fully take effect.

Synonyms: ad, new.

Standard subcommand options: -k, -m.

Example

    $ cvs add Design.rtf
    cvs server: scheduling file 'Design.rtf' for addition
    cvs server: use 'cvs commit' to add this file permanently

Name

admin

Synopsis

cvs [cvs-options] admin [options] [files ...]

Use RCS commands on the repository copy of project files. This command is a frontend for a range of useful (though sometimes useless to CVS) RCS-based commands. Project files are stored in the repository in RCS format, so it is useful to have a way to use some of the RCS commands on the files directly.

Synonyms: adm, rcs.

Standard subcommand options: -k.

Options

-a usernames

Append the comma-separated list of usernames to the RCS access list in the repository (RCS-format) copy of a file. This change to an RCS file has no effect on CVS. See also -A and -e.

-A filename

Append the RCS access list in filename to the access list of the files being operated on.This change to an RCS file has no effect on CVS. See also -a and -e.

-b[ revision ]

Set the default branch of a file to the named branch revision; or, if no revision is named, set the default branch to the highest branch revision on the trunk. This option should be used very rarely in CVS; it is better to check out a sandbox as a branch sandbox with the -r option to checkout or update.

-c string

Set the RCS comment leader of a file to the specified string. This option is not used in CVS.

-e[ usernames ]

Remove the comma-separated list of usernames from the RCS access list in the repository (RCS-format) copy of a file. If no list of usernames is provided, remove all names. This change to an RCS file has no effect on CVS. See also -a and -A.

-i

Create and initialize an RCS file. This option isn't used in CVS (use cvs add instead), and it is not available in CVS 1.9.14 and later.

-I

Run interactively. This option does not work in client/server-mode CVS and may be removed from later versions of CVS.

-l[ revision ]

Lock the specified revision of a file so that another user cannot commit to it. If revision is omitted, CVS locks the latest revision on the current sandbox's branch or the trunk. To work with CVS, the lock requires a script such as the rcslock script in the contrib directory of the source. See Essential CVS for how to use this option. See also -u.

-L

Set RCS locking for a file to strict, which means that the owner of the file must lock the file before committing. (This locking is done by the CVS code, and need not be done manually.) File locking must be set to strict for CVS to work properly; see also -U.

-m revision : message

Replace the log message of the designated revision of a file with the specified message.

-n tagname [:[ revision ]]

Tag the designated revision or branch of a file with the tagname. If there is no revision and no colon, delete the tag; if there is a colon but no revision, tag the latest revision on the default branch, usually the trunk. If the tagname is already present in the file (and the operation isn't "delete"), this option prints an error and exits. See also -N.

Generally, it is better to use cvs tag and cvs rtag to manipulate tags.

-N tagname [:[ revision ]]

Tag the designated revision or branch of a file with the tagname. If there is no revision and no colon, delete the tag; if there is a colon but no revision, tag the latest revision on the default branch, usually the trunk. If the tagname is already present in the file (and the operation isn't "delete"), this option moves the tag to the new revision. See also -n.

Generally, it is better to use cvs tag and cvs rtag to manipulate tags.

-o range

Delete the revisions specified in the range. The revisions given in the range can be revision numbers or tags, but be wary of using tags if multiple tags in a file denote the same revision.

Warning

There is no way to undo a cvs admin -o command.

The range can be any of the following:

revision1 : revision2

Delete revisions between revision1 and revision2, including revision1 and revision2.

revision1 :: revision2

Delete revisions between revision1 and revision2, excluding revision1 and revision2.

revision :

Delete revision and all newer revisions on the same branch (or the trunk).

revision ::

Delete all revisions newer than revision on the same branch (or the trunk).

: revision

Delete revision and all older revisions on the same branch (or the trunk). This range does not delete the base revision of the branch or revision 1.1.

:: revision

Delete all revisions older then revision on the same branch (or the trunk). This range does not delete the base revision of the branch or revision 1.1.

revision

Delete revision.

-q

Run quietly, without printing diagnostics (redundant with cvs -q admin).

-s state [: revision ]

Set the state of the designated revision of a file, or set the last revision on the trunk or the current branch if no revision is listed. The state should be a string and is shown in the output of cvs log and by the Log and State keywords. The dead state is reserved for CVS internal use.

-t[ filename ]

Write the contents of the file specified by filename to the description of each file listed in the command. The description is an RCS field, shown in cvs log output. This option deletes any existing description. If the filename is omitted, CVS seeks input from standard input, ending with a period (.) on a line by itself. See also -t- string.

-t- string

Write the contents of the string to the description of each file listed in the command. The description is an RCS field, shown in cvs log output. This option deletes any existing description. See also -t.

-u[ revision ]

Unlock the specified revision of a file so that another user can commit from that revision. If the revision is omitted, this option unlocks the latest revision on the current sandbox's branch or the trunk. This option requires a script such as the rcslock script in the contrib directory of the source. See Essential CVS for how to use this option. See also -l.

-U

Set RCS locking for a file to nonstrict, which means that the owner of the file does not need to lock the file before committing. (This locking is done by the CVS code and need not be done manually.)

File locking must be set to strict for CVS to work properly. This option should never be used on CVS-stored files. See also -L.

-V N

Write an RCS file compatible with RCS version N. This option isn't used in CVS anymore, and it is not available in CVS 1.9.20 and later.

-x suffix

Specify the suffix for the RCS file. This option is not used or available in CVS (all CVS files use ,v as the suffix).

Example

    $ cvs admin -kb AcceptanceTest.doc
    RCS file: /var/lib/cvs/wizzard/doc/AcceptanceTest.doc,v
    done

Name

annotate

Synopsis

cvs [cvs-options] annotate [options] [files ...]

Display a file or files with annotations showing the last editor and revision that changed each line of the file. If no files are supplied, the files in the current sandbox are shown. See also rannotate.

Synonym: ann.

Standard subcommand options: -D, -f, -l, -r, -R.

Option

-F

Show annotations for binary files.

Example

    $ cvs annotate Makefile

    Annotations for Makefile
    ***************
    1.2  (arnold     01-Sep-02): #
    1.2  (arnold     01-Sep-02): # Wizzard project Makefile
    1.2  (arnold     01-Sep-02): # A Robbins, 1 September 2002

Name

checkout

Synopsis

cvs [cvs-options] checkout [options] projects ...

Create a new sandbox in the current working directory. This command can also be used to update an existing sandbox. See also export and update.

The projects argument to checkout may be one or more paths to directories within the repository, paths to files within the repository, or module names as specified in the modules file in the repository's CVSROOT directory. These paths must be separated by spaces.

When creating a new sandbox, the repository path must be specified by using the -d repository_path CVS option or the CVSROOT environment variable.

If you are creating a new sandbox inside an existing sandbox, the CVS/Root file of the current directory in the existing sandbox can provide a repository path. In most cases, having a sandbox inside a sandbox is needlessly confusing.

Synonyms: co, get.

Standard subcommand options: -d, -D, -f, -k, -l, -n, -N, -r, -R.

Options

-A

Clear sticky tags, dates, and keyword-expansion modes from a project and replace the current files with the head of the trunk.

-c

Display the contents of the modules file in the repository's CVSROOT directory. This option lists the modules in the current repository and the options applicable to those modules. See also -s.

Tip

checkout -c lists only those projects that have entries in the modules file.

-j revision [: date ]

Determine the changes between the revision the files in the sandbox are based on and the specified revision and merge those changes to the sandbox.

If two -j options are used, determine the changes between the first -j revision and the second -j revision and merge those changes to the sandbox.

The date can be used only if the revision designates a branch. date specifies the latest revision on that date.

-p

Check out the listed files to the standard output, rather than to the filesystem.

-P

Do not include empty directories in the sandbox.

-s

Display the contents of the modules file in the repository's CVSROOT directory. This option lists the modules in the current repository and their status. See also -c.

Example

    $ cvs -d cvs:/var/lib/cvs checkout wizzard
    cvs server: Updating wizzard
    U wizzard/Changelog
    U wizzard/INSTALL
    U wizzard/Makefile

Name

commit

Synopsis

cvs [cvs-options] commit [options] [files ...]

Commit changes in a sandbox to the repository. Until a commit is run, changes such as modified, new, or removed files are not reflected in the repository. If no files are listed as arguments, CVS uploads all changes in the current sandbox.

Unless you use either the -m or -F options, commit invokes an editor to request a log message.

If there have been changes in the repository version of a file since it was last synchronized with the repository and the local version has also changed, you have a conflict and the file cannot be committed. You can try to commit the file again once you have updated it using cvs update or cvs checkout. The update will include an attempt to merge the file.

Synonyms: ci, com.

Standard subcommand options: -l, -m, -n, -r, -R.

Options

-f

Force CVS to commit a file even if there have been no changes to the file. This option implies the -l option.

-F logfile

Read a log message from the specified logfile rather than calling an editor.

Example

    /home/arnold/cvs/wizzard$ cvs commit
    cvs commit: Examining .
    cvs commit: Examining doc
    cvs commit: Examining lib
    ...
    RCS file: /var/lib/cvs/wizzard/doc/Design.rtf,v
    done
    Checking in doc/Design.rtf;
    /var/lib/cvs/wizzard/doc/Design.rtf,v  <--  Design.rtf
    initial revision: 1.1
    done

Name

diff

Synopsis

cvs [cvs-options] diff [format-options] [options] [files ...]

Display the differences between two revisions of a file or files. By default, diff checks the sandbox copy against the revision in the repository that the sandbox copy was last synchronized with. If the files argument is a directory, all files under that directory are compared and files in subdirectories are also compared recursively. See also rdiff.

Synonyms: di, dif.

Standard subcommand options: -D, -k, -l, -r, -R.

The format-options determine how cvs diff displays any differences it finds. They operate in the same way as the options to the GNU diff program. This includes full support for the line and group format options; see the entry for diff in Chapter 2.

Example

This is a simple example to show how CVS displays the difference between the current and repository revisions of the Makefile.

    $ cvs diff Makefile
    Index: Makefile
    =============================
    RCS file: /var/lib/cvs/wizzard/Makefile,v
    retrieving revision 1.6
    diff -r1.6 Makefile
    25a26
    >       rm -f lib/*.o

Name

edit

Synopsis

cvs [cvs-options] edit [options] [files ...]

Mark a file as being edited by the current user. This command is used as part of the cvs watch family of commands. If a file is being watched, it is checked out to the sandbox with read permissions but not write permissions. The edit command sets the sandbox file as writable, notifies any watchers that the file is being edited, and sets the user as a temporary watcher to be notified if certain actions are performed on the file by other users. See also editors, unedit, watch, and watchers.

Tip

CVS does not notify you of your own changes.

You can unedit (set read-only and clear the temporary watch) a file with cvs unedit or cvs release, or by removing the file and recreating it with cvs update or cvs checkout.

CVS uses any script in the notify file in the repository's CVSROOT directory to notify the user of changes.

Synonyms: none.

Standard subcommand options: -l, -R.

Option

-a action

Notify the user when the specified action occurs to the file. This setting acts as a temporary watch (see watch) on the file and is removed when the file is no longer being edited. Each -a designates one of the possible actions. The -a option can be repeated to designate multiple actions. The action may be any of the following:

commit

Notify the user when someone else commits changes to the file.

edit

Notify the user if someone else has run cvs edit on the file.

unedit

Notify the user when the file is no longer being edited by someone else. This notification is triggered by the user running cvs unedit or cvs release or by the file being deleted and re-created with cvs update or cvs checkout.

all

Notify the user of all of the previous actions.

none

Notify the user of none of the previous actions.

Name

editors

Synopsis

cvs [cvs-options] editors [-lR] [files ...]

Displays the list of people who have a current edit command for the file or files listed as parameters. If no files are listed, this command lists the editors for the files in the current directory and subdirectories. See also edit, unedit, watch, and watchers.

Synonyms: none.

Standard subcommand options: -l, -R.

Example

    $ cvs editors Makefile
    Makefile arnold Sat Oct 26 01:51:02 2002 GMT helit
    /home/arnold/cvs/wizzard

Name

export

Synopsis

cvs [cvs-options] export [options]project

Create a directory containing all directories and files belonging to a specified release of a project, with no CVS administrative files. It acts like a checkout or update for that specific point, but it does not produce the CVS administrative files. export requires the -r or -D command options. When exporting, the repository path must be specified by using the -d repository_path CVS option or the CVSROOT environment variable. See also checkout and update.

The argument to export can be a directory name or path within the repository, a filename or path within the repository, or a module name as specified in the modules file in the repository's CVSROOT directory.

Tip

You can imply the repository path by being in a sandbox, but exporting into a sandbox is not recommended.

Synonyms: exp, ex.

Standard subcommand options: -d, -D, -f, -k, -l, -n, -N, -r, -R.

Example

    $ cvs -d cvs:/var/lib/cvs export -D now wizzard
    cvs server: Updating wizzard
    U wizzard/Changelog
    U wizzard/INSTALL
    U wizzard/Makefile

Name

history

Synopsis

cvs [cvs-options] history [options] [files ...]

Display the information stored in the history file in the repository's CVSROOT directory. If that file does not exist or is not writable, the history command fails with an error. CVS writes to the history file during checkout, export, commit, rtag, update, and release operations.

Synonyms: hi, his.

Standard subcommand options: -D, -r.

Tip

The -f, -l, -n, and -p options for cvs history act differently than their normal uses in CVS.

Options

-a

Show history data for all users. By default, CVS shows only the data for the calling user.

-b string

Show data that is more recent than the newest record that contains the given string in the module name, filename, or repository path.

-c

Report only commits—times when the repository was modified (equivalent to -xAMR).

-e

Report on every record type. This option is equivalent to -x with every type specified.

-f file

Show data for the specified file. This option can be repeated to show data for multiple files.

-l

Show only the most recent commit to the repository.

-m module

Show data for a particular module. CVS checks the modules file in the repository's CVSROOT directory and then searches the history file for files and directories that belong to the module.

-n module

Like -m, but search only the history file for the specified module name.

-o

Report on records of checkouts (equivalent to -xO).

-p directory

Show records for a particular project directory. This option can be repeated to show records for several projects.

-r revision

Show data as of, or more recent than, the revision or tag. CVS searches the repository's project files to determine the timestamp of the revision.

-t tagname

Show data as of, or more recent than, the latest time a tag record with this tagname was stored in the history file by any user.

-T

Report on records of tags (equivalent to -xT).

-u username

Report on records for the specified username. This option can be repeated to search for multiple users.

-w

Report on records of actions that match the current working directory.

-x flag(s)

Extract records that match the given flag or flags. Any number of flags can be used with the -x option. cvs history extracts all records in the history file that match this option and all other options. The flags may be any of the following:

A

Report on records of files added to the repository.

C

Report on records of files that would have been updated in a sandbox, but where the files needed to be merged and there were conflicts in the merge.

E

Report on records of files exported from the repository.

F

Report on records of files that were released.

G

Report on records of files updated in a sandbox with a successful merge.

M

Report on records of files that were modified (a sandbox revision added to the repository).

O

Report on records of files that were checked out.

R

Report on records of files that were removed from the repository.

T

Report on records of files that were tagged with CVS rtag.

U

Report on records of files updated in a sandbox file with no merge required.

W

Report on records of files deleted from a sandbox during an update because they were no longer active in the repository.

-z timezone

Produce output and convert times to the specified timezone. The time zone can be a recognized abbreviation such as EST, or it can be given as an offset of UTC. Time zones are listed in the earlier section "Time Zones."

Example

    $ cvs history
    O 2002-10-03 08:33 +0000 arnold wizzard/src =wizmain=  <remote>/*
    O 2002-10-03 09:12 +0000 arnold wizzard     =wizmake=  <remote>/*
    O 2002-10-03 09:12 +0000 arnold wizzard/src =wiztest=  <remote>/*
    O 2002-10-25 08:58 +0000 arnold wizzard     =wizzard=  <remote>/*

Name

import

Synopsis

cvs [cvs-options] import [options]project-name vendor-tag release-tag

Create a new project in the repository or manage vendor branches. To create a new project, lay out the project structure and any initial files. You can do this in a temporary directory, as CVS does not need the initial structure or files once the project has been imported. Change directories into the root directory of the new project, then run cvs import. You need to specify the repository path and provide a project name and two tags: a vendor tag and a release tag.

The project-name will become the project's root directory name. The tags are less critical; if you do not intend to use a vendor branch, a meaningless pair of tags such as a1 b2 is sufficient. The tag names must conform to all the normal requirements for tags: they must start with a letter and can contain only alphanumeric characters, underscores (_), and hyphens (-). The HEAD and BASE tag names are reserved.

A vendor branch is a special branch that CVS provides to track third-party code that contributes to a project. If you use vendor branches, CVS uses the vendor-tag as a branch tag for the vendor branch, and it uses the release-tag to mark the current revisions of the vendor branch files.

Create a vendor branch by using cvs import to create the project. When you want to update to a new release from the vendor, use cvs import on the same project with the same vendor tag and a new release tag.

Tip

Test that you can cvs checkout the new project before removing the original files.

Synonyms: im, imp.

Standard subcommand options: -k, -m.

Options

-b branch

Import to the specified vendor branch. If you have more than one external supplier for a project, you may need to use two or more distinct vendor branches to manage the project. If you are using multiple vendor branches, use the -b option to specify which branch you are importing to. branch must be the branch number, not a tag, and CVS does not check that the branch number given with the option and the symbolic tag provided as the vendor-tag argument to the command correspond to the same branch.

-d

When setting the timestamp on each imported file, use each file's last modification time rather than the current time.

-I file

Ignore file when updating. -I can be used more than once. Use -I ! to clear the list of ignored files.

-W wrapper

Modify the import based on elements of each filename.

Example

    $ cvs -d cvs:/var/lib/cvs import wizzard wizproject ver_0-1
    ...
    No conflicts created by this import

Name

init

Synopsis

cvs [cvs-options] init

Convert an existing directory into a CVS repository and create and populate the CVSROOT directory that contains the administrative files for a CVS repository.

CVS creates the final directory in the path if it does not already exist. Previous directories in the path must exist.

Synonyms: none.

Example

    $ cvs -d /var/lib/cvsroot init

Name

kserver

Synopsis

cvs [cvs-options] kserver

Run the repository-server end of a Kerberos 4 connection. The cvs kserver command must be called from inetd or an equivalent server daemon. See also pserver.

Synonyms: none.

Name

log

Synopsis

cvs [cvs-options] log [options] [files ...]

Display information about the files in the current sandbox or the files specified as parameters. The information this command provides is part of the header section of the files in the repository. This command also provides information from the log messages created when files are imported or changes are committed.

With no options, cvs log displays all the information it has available. See also rlog.

Synonym: lo.

Standard subcommand options: -l.

Options

-b

Display information about only the revisions on the default branch, normally the trunk.

-d dates

Display information only on revisions checked in on or between the dates or times provided. Date and time formats are listed in the earlier section "Dates." More than one date range can be given; ranges must be separated by semicolons. Date ranges can be specified according to the following list:

date1>date2, date2<date1

Select all revisions between the two dates.

date1>=date2, date2<=date1

Select all revisions on or between the two dates.

date>, <date

Select all revisions earlier than date.

date>=, <=date

Select all revisions on or earlier than date.

date<, >date

Select all revisions later than date.

date<=, >=date

Select all revisions on or later than date.

date

Select all revisions on date.

-h

Print only the header information for a file, not the description, the log messages, or revision information.

-N

Do not list the tags (the symbolic names).

-r[ revisions ]

Provide information only on revisions in the ranges provided. More than one range can be given; ranges must be separated by commas. There must be no space between the -r and its argument. If no range is provided, the latest revision on the default branch, normally the trunk, is used.

Ranges can be specified according to the following list:

revision1:revision2, revision1::revision2

Select all revisions between revision1 and revision2. The revisions must be on the same branch. With the double colon, CVS excludes revision1.

:revision, ::revision

Select revisions from the start of the branch or trunk the revision is on, up to and including the revision.

revision:, revision::

Select revisions from revision to the end of the branch or trunk the revision is on. With the double colon, CVS excludes the revision.

branch

Select all revisions on branch.

branch1:branch2, branch1::branch2

Select all revisions on both branches and any branches that split off from the two branches.

branch .

Select the latest revision on branch. Note the trailing period.

-R

Display the name of the repository copy of a file only.

-s states

Display only revisions with states that match one of the states in the comma-separated list.

-S

Do not display header information if there are no revisions to display.

-t

Print only the header information and description, not the log messages or revision information.

-w[ usernames ]

Display only revisions committed by the specified list of users. Provide the list of users as a comma-separated list. If no usernames are listed, the revisions committed by the current user are displayed. There can be no space between -w and its argument.

Example

    $ cvs log
    cvs server: Logging .

    RCS file: /var/lib/cvs/wizzard/Changelog,v
    Working file: Changelog
    head: 1.1
    branch:
    locks: strict
    access list:
    symbolic names:
    beta_0-1_branch: 1.1.0.2
    beta_0-1_branch_root: 1.1
    pre_beta_0-1: 1.1
    keyword substitution: kv
    total revisions: 1;     selected revisions: 1
    description:
    ----------------------------
    revision 1.1
    date: 2002/08/31 13:37:56;  author: arnold;  state: Exp;
    Creating a structure.
    ...

Name

login

Synopsis

cvs [cvs-options] login

Log in to a CVS pserver session. This command is needed only with the pserver connection mode. See also logout.

Synonyms: none.

Example

    $ acct=:pserver:arnold:password:@cvs.nosuch.net:/var/lib/cvs
    $ cvs -d $acct login
    Logging in to :pserver:arnold@cvs:2401/var/lib/cvs

Name

logout

Synopsis

cvs [cvs-options] logout

Log out of a CVS pserver session. This command is needed only with the pserver connection mode. See also login.

Synonyms: none.

Example

    $ cvs -d :pserver:arnold@cvs:/var/lib/cvs logout
    Logging out of :pserver:arnold@cvs:2401/var/lib/cvs

Name

pserver

Synopsis

cvs [cvs-options] pserver

Run the repository-server end of a password server or Kerberos 5 (via the GSS-API) connection. This command must be called from inetd or an equivalent server daemon. See also kserver.

Synonyms: none.

Name

rannotate

Synopsis

cvs [cvs-options] rannotate [options] files ...

Displays files with annotations showing the last editor and revision that changed each line of each specified file. You can run rannotate without a sandbox, but you must have a repository specified if you do so. rannotate requires at least one filename, directory name, or module name from within the repository as an argument. See also annotate.

Synonyms: ra, rann.

Standard subcommand options: -D, -f, -l, -r, -R.

Option

-F

Show annotations for binary files.

Example

    $ cvs rannotate wizzard/Makefile

    Annotations for wizzard/Makefile
    ***************
    1.2  (arnold     01-Sep-02): #
    1.2  (arnold     01-Sep-02): # Wizzard project Makefile
    1.2  (arnold     01-Sep-02): # A Robbins, 1 September 2002

Name

rdiff

Synopsis

cvs [cvs-options] rdiff [options] projects ...

Create output that can be redirected into a file and used with the GNU (or equivalent) patch program. The output goes to the standard output. rdiff operates directly from the repository and does not need to be used from a sandbox. It does require a filename, directory name, or module name as an argument, and you must specify one or two revisions or dates. If you specify one revision or date, rdiff calculates the differences between that date and the current (HEAD) revision. If two dates are specified, rdiff calculates the differences between the two. See also diff.

Synonyms: pa, patch.

Tip

Most people use rdiff to make a file to use with patch. If you're using a patch file that was created over more than one directory, you may need to use the -p option to patch, so that it can find all the appropriate directories.

Standard subcommand options: -D, -f, -l, -r, -R.

Options

-c

Use context output format, with three lines of context around each change. This is the default format.

-s

Create a summary change report rather than a patch, showing which files have changed with one line per file.

-t

Produce a report on the two most recent revisions in a file. Do not use -r or -D with the -t option.

-u

Use unidiff format instead of context format.

-V version

This option is now obsolete, but it used to allow you to expand keywords according to the rules of the specified RCS version.

Example

    $ cvs rdiff -r 1.5 wizzard/Makefile
    Index: wizzard/Makefile
    diff -c wizzard/Makefile:1.5 wizzard/Makefile:1.6
    *** wizzard/Makefile:1.5     Thu Oct 17 08:50:14 2002
    --- wizzard/Makefile         Thu Oct 17 10:01:12 2002
    ***************
    *** 2,18 ****
      # Makefile for the Wizzard project
      # First created by A Robbins, 1 September 2002
      #
    ! # Current revision $Revision: 1.1 $
      # On branch $Name:  $ (not expanded if this is the trunk)
    ! # Latest change by
      # $Author: ellie $ on $Date: 2005/11/28 20:16:25 $
      #
      ##

      # Initial declarations
      #
      CC=gcc
    ! SUBDIRS = man doc src lib

      # Declaring phony targets
    --- 2,18 ----
      # Makefile for the Wizzard project
      # First created by A Robbins, 1 September 2002
      #
    ! # Current revision $Revision: 1.1 $
      # On branch $Name:  $ (not expanded if this is the trunk)
    ! # Latest change by
      # $Author: ellie $ on $Date: 2005/11/28 20:16:25 $
      #
      ##

      # Initial declarations
      #
      CC=gcc
    ! SUBDIRS = man doc src lib test

      # Declaring phony targets
    ***************
    ...

Name

release

Synopsis

cvs [cvs-options] release [-d] directories ...

Make a sandbox inactive. This command checks for uncommitted changes, removing any existing edit flags, and writes to the CVSROOT/history file that the sandbox has been released. You can use release on an entire sandbox or on one or more subdirectories.

Synonyms: re, rel.

Option

-d

Delete the sandbox after it has been released.

Example

    $ cvs -d cvs:/var/lib/cvs release wizzard
    You have [0] altered files in this repository.
    Are you sure you want to release directory 'wizzard':y

Name

remove

Synopsis

cvs [cvs-options] remove [-flR] [files ...]

The remove command removes a file or directory from the repository. It can also be used to undo an uncommitted file addition.

Synonyms: rm, delete.

Standard subcommand options: -l, -R.

Option

-f

Delete the files from the sandbox before removing them from the repository.

Example

    $ cvs remove server.cc
    cvs server: scheduling 'server.cc' for removal
    cvs server: use 'cvs commit' to remove this file permanently

Name

rlog

Synopsis

cvs [cvs-options] rlog [options] files ...

The rlog command is a remote version of the log command. rlog works without a sandbox and requires a file, directory, or module name from the repository. See also log.

Synonym: rl.

Standard subcommand option: -l.

Options

-b

Provide information only about the revisions or a file on the default branch, normally the highest branch on the trunk.

-d dates

Provide information only on revisions of a file that were checked in on or between the dates or times provided. Date formats are listed in the earlier section "Dates." More than one date range can be given; ranges must be separated by semicolons. Date ranges are the same as for the log command; see log.

-h

Print only the header information, not the description, log messages, or revision information.

-N

Do not list the tags (the symbolic names).

-r[ revisions ]

Provide information only on revisions in the ranges provided. More than one revision range can be given; ranges must be separated by commas. There must be no space between the -r and its argument. If no range is provided, the latest revision on the default branch, normally the trunk, is used. The possible values for revisions are the same as for log, see log.

-R

Display the name of the repository copy of the file only.

-s states

Display only revisions with states that match one of the states in the comma-separated list.

-S

Do not display header information of a file if there are no revisions to display.

-t

Print only the header information of a file and its description, not the log messages or revision information.

-w[ usernames ]

Display only revisions committed by the usernames in the comma-separated list. If there are no usernames listed, the revisions committed by the current user are displayed. There can be no space between -w and its argument.

Name

rtag

Synopsis

cvs [cvs-options] rtag [options] tagname files ...

Mark a revision of a single file with a meaningful name or mark a set of revisions of multiple files so that they can all be retrieved easily as a group. Tagnames must begin with a letter and may contain only alphanumeric characters, underscores (_), and hyphens (-). There are two tags reserved for CVS : the BASE and HEAD tags. See also tag.

The tag and rtag commands are also used to create branches.

The rtag command does not need to run from a sandbox, but it does need to have a revision or date specified. It also requires a filename, directory name, or module name given as a parameter.

Synonyms: rt, rfreeze.

Standard subcommand options: -D, -f, -l, -n, -r, -R.

Options

-a

Clear a tag from files that have been removed from active development. Normally, removed files are not searched when tags are removed. This option works with the -d and -F options.

-b

Create a branch off the designated revision (provided with -r), using the designated tagname as the branch name.

-B

Allow -F and -d to act on branch tags. Back up the repository before you use this option, and be extremely careful. See Chapter 4 in Essential CVS before using this option.

-d

Delete the specified tag.

-F

Move the tag from the revision it currently refers to, to the revision specified in the rtag command.

Example

    $ cvs -d cvs:/var/lib/cvs rtag -D now alpha_1-6 wizzard
    cvs rtag: Tagging wizzard
    cvs rtag: Tagging wizzard/doc
    cvs rtag: Tagging wizzard/doc/design
    cvs rtag: Tagging wizzard/doc/plan
    ...

Name

server

Synopsis

cvs server

Runs the repository end of the CVS server using an internal version of the rsh program. The CVS client must also be able to use this internal version. This is used for the server access method. See also kserver and pserver.

Synonyms: none.

Name

status

Synopsis

cvs [cvs-options] status [-vlR] [files ...]

Display information about files, such as the current working or base revision, the current revision in the repository, and whether the files are currently synchronized with the repository. With the -v option, status also shows the files' tags.

Synonyms: st, stat.

Standard subcommand options: -l, -R.

Option

-v

Include information about tags.

Example

    $ cvs status Makefile
    =============================
    File: Makefile              Status: Locally Modified

    Working revision:    1.6
    Repository revision: 1.6     /var/lib/cvs/wizzard/Makefile,v
    Sticky Tag:          (none)
    Sticky Date:         (none)
    Sticky Options:      (none)

Name

tag

Synopsis

cvs [cvs-options] tag [options] tagname[files ...]

Mark a revision of a single file with a meaningful name or mark a set of revisions of multiple files so that they can all be retrieved easily as a group. Tagnames must begin with a letter and may contain only alphanumeric characters, underscores (_), and hyphens (-). There are two tags reserved for CVS: the BASE and HEAD tags. See also rtag.

The tag and rtag commands are also used to create branches.

If no revision number or date is given to the tag command, this command tags based on the most recent revision in the repository that was synchronized with the current sandbox directory (i.e., the most recently updated, checked-out, or committed revision). This revision can be seen as the working revision in the cvs status command.

Synonyms: ta, freeze.

Standard subcommand options: -D, -f, -l, -r, -R.

Options

-b

Create a branch off the specified revision, using the specified tagname as the branch name.

-c

Check whether the sandbox copies of the specified files have been modified since they were last synchronized with the repository. If they have been modified, do not tag them and display an error. If they are unmodified, tag them with the specified tagname. This option is useful when tagging the current sandbox revisions.

-d

Delete the specified tagname from a file.

-F

Move the tagname from the revision it currently refers to, to the revision specified in the tag command.

Example

    $ cvs tag alpha_1-5
    cvs server: Tagging .
    T Changelog
    T INSTALL
    T Makefile
    T README
    T TODO
    ...

Name

unedit

Synopsis

cvs [cvs-options] unedit [-lR] [files ...]

Unmark a file as being edited by the current user. The cvs unedit command is used as part of the cvs watch family of commands. If a file is being watched, CVS writes it (when it is checked out) to the sandbox with read permissions but not write permissions. The unedit command notifies watchers that the file is no longer being edited, clears the temporary watch, sets the file as read-only, and restores the file to the repository revision that the sandbox copy was based on. See also edit, editors, watch, and watchers.

The script in the notify file in the repository's CVSROOT directory is used to notify the user of changes.

Synonyms: none.

Standard subcommand options: -l, -R.

Name

update

Synopsis

cvs [cvs-options] update [options] [files ...]

Download changes from the repository to an existing sandbox. While doing this, update merges changes from the repository into changed files in the sandbox. See also checkout and export.

If update cannot merge repository changes with sandbox changes without losing data, it reports a conflict.

If update is not given any filenames or directory names as parameters, it acts on the current sandbox.

Synonyms: up, upd.

Standard subcommand options: -D, -f, -k, -l, -r, -R.

Options

-A

Clear sticky tags, dates, and keyword-expansion modes and replace the current files in the sandbox with the head of the trunk.

-C

Replace any file that has been changed locally with the revision from the repository that the local file was based on. The modified local file is saved as .# file . revision in the local sandbox directory.

-d

Create any directories that are in the repository but not in the sandbox. By default, update works only on the directories that are currently in the sandbox and ignores any new directories.

-I file

Ignore file when updating. -I can be used more than once. Use -I ! to clear the list of ignored files.

-j revision [: date ]

Determine the changes between the revision the files in the sandbox are based on and the specified revision and merge the changes to the sandbox.

If two -j options are used, determine the changes between the first -j revision and the second -j revision and merge those changes to the sandbox.

The date can be used only if the revision designates a branch. If date is used, it specifies the latest revision on (not before) that date.

-p

Update the listed files, but write them to the standard output rather than to the filesystem. Do not change the sandbox.

-P

Do not include empty directories in the sandbox.

-W wrapper

Modify the update based on elements of each filename.

Example

    $ cvs update
    cvs server: Updating .
    U wizzard/Changelog
    U wizzard/INSTALL
    U wizzard/Makefile

Name

version

Synopsis

cvs [cvs-options] version

Display the version information for the current installation of CVS .

Synonyms: ve, ver.

Example

    $ cvs version
    Concurrent Versions System (CVS) 1.11.15 (client/server)

Name

watch

Synopsis

cvs [cvs-options] watch command [options] [files ...]

Set files to be watched or add users to the file watch list. Users who are watching a file are notified via the script in the notify file in the repository's CVSROOT directory when other users perform specific actions. Essential CVS explains uses of the cvs watch family of commands. See also edit, editors, unedit, and watchers.

Tip

CVS does not notify you of your own changes.

Synonyms: none.

Standard subcommand options: -l, -R.

Commands

on and off

The on and off subcommands control whether the file or files are marked as being watched. If a file is marked as being watched, CVS sets it as read-only when it is checked out of the repository. Without this read-only setting, developers might forget to use cvs edit when editing a file.

If the argument is a directory, all current files in the directory and all new files added to that directory in the future are set as being watched.

The on and off subcommands set whether a file is watchable, but they do not set who is watching it; the add and remove subcommands set whether or not you are watching a file.

add and remove

Use the add and remove subcommands to set or remove files you want to watch. Use the -a option to specify which actions you want to be notified of.

Option

-a action

Notify the user when the designated actions occur to the file. Each -a designates one possible action. The -a option can be repeated to designate multiple actions. The -a option is usable only with the add and remove subcommands.

These are the possible actions:

commit

Notify the user when someone else commits changes to the file.

edit

Notify the user if someone else has run cvs edit on the file.

unedit

Notify the user when the file is no longer being edited by someone else. Notification occurs when cvs unedit or cvs release runs or when the file is deleted and re-created with cvs update or cvs checkout.

all

Notify the user in all of the previous cases.

none

Notify the user in none of the previous cases.

Examples

    $ cvs watch on Makefile
                     Enable watching
    $ cvs watch add MakefileAdd me to list of watchers

Name

watchers

Synopsis

cvs [cvs-options] watchers [-lR] [files ...]

Displays the list of users who are watching the files listed as parameters. If no files are listed, this command lists the watchers for the files in the current directory and its subdirectories. See also edit, editors, unedit, and watch.

Standard subcommand options: -l, -R.

Example

    $ cvs watchers Makefile
    Makefile doppel edit unedit commit
    arnold edit unedit commit

Chapter 15. The Subversion Version Control System

The Subversion version control system is a powerful Open Source system for management of file and directory versions. Designed from the ground up to support distributed development, it offers many leading-edge features.

This chapter covers the following topics:

Conceptual overview

Obtaining Subversion

Using Subversion: a quick tour

The Subversion command line client: svn

Repository administration: svnadmin

Examining the repository: svnlook

Providing remote access: svnserve

Other Subversion components

Most of the material in this chapter is adapted from Version Control with Subversion, which is cited in the Bibliography. See that book for much more information on Subversion.

Conceptual Overview

Subversion is a version control system. It lets you track changes to an entire project directory tree. Every change made to the tree is recorded and can be retrieved.

Subversion is intended to be "a better CVS;" this is discussed in detail shortly. Subversion is purposely an Open Source project. If you want to participate, you can!

Basic Version Control Operations

Actual data is kept in a repository, a set of directories and files managed by Subversion . Users use the svn client program to access the repository and make changes to it.

Subversion uses the copy-modify-merge development model. You make a private copy of a given project in a sandbox . (This is often called checking out a copy.) Like CVS and unlike RCS, this private copy is not locked in the repository. You then make all the changes you like to the copy within the sandbox, without having to worry about what other developers are doing. As you work, you can compare your changes to the version you started with, as well as to the version currently in the repository. Once you're satisfied with the changes, you commit them, sometimes referred to as a check-in. (These terms come from RCS and CVS.)

In the event that another developer has modified part of a file that you were working on and checked it in, when you commit your changes Subversion notices, and indicates that a conflict exists. Conflicts are marked as such in the file, and Subversion creates pristine copies of the file as it exists in the repository and of the file as you modified it, so that you can do full comparisons. Once you have resolved the conflict, you tell Subversion about it, and then commit the final version.

Like CVS, Subversion lets you create a development branch , a separate stream of development versions. You can periodically merge changes from the main development stream (the trunk) into your branch, and also merge changes from your branch back into the trunk.

Finally, you can tag a particular copy of the project. For instance, when a project is ready for a release, you can create a snapshot of the project, and give it a descriptive tag that allows you to re-create the project tree exactly as it was for the release. This is particularly valuable for when you need to produce a bug fix for an older version of the project, or attempt to retrofit a fix or feature from current development into an older version.

Building a Better CVS

When discussing Subversion's features, it is often helpful to speak of them in terms of how they improve upon CVS's design. Subversion provides:

Directory versioning

CVS only tracks the history of individual files, but Subversion implements a "virtual" versioned filesystem that tracks changes to whole directory trees over time. Files and directories are versioned.

True version history

Since CVS is limited to file versioning, operations such as copies and renames—which might happen to files, but which are really changes to the contents of some containing directory—aren't supported in CVS. In CVS, you cannot delete a versioned file and then create a new file of the same name with different contents without inheriting the history of the old—perhaps completely unrelated—file. With Subversion, you can add, delete, copy, and rename both files and directories. Every newly added file begins with a fresh, clean history all its own, even if the filename was previously used.

Atomic commits

A collection of modifications either goes into the repository completely, or not at all. This allows developers to construct and commit changes as logical chunks, and prevents problems that can occur when only a portion of a set of changes is successfully sent to the repository.

Versioned metadata

Each file and directory has a set of properties—keys and their values—associated with it. You can create and store any arbitrary key/value pairs. Properties are versioned over time, just like file contents.

Choice of network layers

Subversion has an abstracted notion of repository access, making it easy to implement new network mechanisms. Subversion can plug into the Apache HTTP Server as an extension module. This gives Subversion a big advantage in stability and interoperability, and instant access to existing features provided by that server—authentication, authorization, wire compression, and so on. A more lightweight, standalone Subversion server process is also available. This server speaks a custom protocol that can be easily tunneled over SSH.

Consistent data handling

Subversion expresses file differences using a binary differencing algorithm, which works identically on both text (human-readable) and binary (human-unreadable) files. Both types of files are stored equally compressed in the repository, and only the differences are transmitted in both directions across the network.

Efficient branching and tagging

The cost of branching and tagging need not be proportional to the project size. Subversion creates branches and tags by simply copying the project, using a mechanism similar to a hard link. Thus these operations take only a very small, constant amount of time.

Hackability

Subversion has no historical baggage; it is implemented as a collection of shared C libraries with well-defined APIs. This makes Subversion extremely maintainable and usable by other applications and languages.

Optimized around the network

Disk storage continues to increase in size and speed and decrease in cost: disk space is cheap on today's systems. However, network connectivity has not kept pace; access to remote repositories is several orders of magnitude slower than local access. Thus the Subversion design is optimized to avoid connecting to the repository when possible. For example, in the working copy's administrative directory, .svn, Subversion maintains a pristine copy of each file as it was checked out of the repository. This makes it possible to produce the differences very quickly, with no need to contact the repository.

In addition, Subversion uses commands similar to those of CVS, making it straightforward to transfer your CVS habits to Subversion.

Converting a Repository from CVS to Subversion

A very effective way to learn Subversion if you already know CVS is to move your project from CVS to Subversion. The quickest way to accomplish this is to do a flat import into a Subversion repository from an exported CVS repository. However, this only gives you a "snapshot" of your repository; the revision history (changes, logs, tags, branches, etc.) are not kept.

Copying a repository while maintaining history is a difficult problem to solve. Nevertheless, a few tools exist that at least partially convert existing CVS repositories into new Subversion ones, such as cvs2svn, a Python script originally created by members of Subversion's own development community (see http://cvs2svn.tigris.org/), and Lev Serebryakov's RefineCVS (see http://lev.serebryakov.spb.ru/refinecvs/).

For an updated collection of links to known converter tools, visit the Links page of the Subversion web site, http://subversion.tigris.org/project_links.html.

Special File Properties

Subversion allows you to associate properties with files or directories. A property is just a keyword/value pair associated with the file. Subversion reserves property names starting with svn: for its own use. The special properties in Subversion 1.0 are:

svn:author

The username of the person who committed a particular revision.

svn:date

The date when the transaction for a revision was created.

svn:eol-style

Different operating systems use different conventions to mark the end of lines in text files. Unix and its workalikes use a single ASCII line-feed character (LF) to end lines. MS Windows systems use a Carriage Return + Line Feed combination (CRLF), and older Macintosh systems use a single Carriage Return (CR). This can cause problems when a Windows user stores a new revision of the file: suddenly a Unix user who does a checkout sees a file with extraneous Carriage Return characters at the end of every line. The svn:eol-style attribute solves this problem. It should be set to one of the following values:

CR

Clients should always use CR line terminators, no matter what the native format is.

CRLF

Clients should always use CR-LF line terminators, no matter what the native format is.

LF

Clients should always use LF line terminators, no matter what the native format is.

native

Clients should use the native format when checking out files.

Subversion always stores files in normalized, LF-only format in the repository.

svn:executable

Valid only for files, the mere presence of this property indicates that the file should be made executable when it's checked out or updated from the repository. It has no effect on filesystems, such as FAT-32 or NTFS, that don't have the concept of an execute bit.

svn:externals

This property, when set on a directory under version control, allows you to specify other external repositories to use for particular local subdirectories. You set this property with svn propset or svn propedit (see the "svn Subcommands" section later in the chapter). The value is a multiline table of directories and fully-qualified Subversion URLs. For example:

    $ svn propget svn:externals calc
    third-party/sounds             http://sounds.red-bean.com/repos
    third-party/skins              http://skins.red-bean.com/repositories/skinproj
    third-party/skins/toolkit -r21 http://svn.red-bean.com/repos/skin-maker

Once set, anyone else who checks out a working copy will also get the third-party files checked out automatically.

svn:ignore

A property containing a list of file patterns that certain Subversion operations will ignore. It should be set on directories, as needed. It works to filter unversioned files and directories out of commands like svn status, svn add, and svn import. It is similar to the .cvsignore file in CVS, and you can often import your .cvsignore with this command:

    $ svn propset svn:ignore -F .cvsignore .
    property 'svn:ignore' set on '.'

svn:keywords

A list of keywords for which Subversion should perform keyword expansion when checking out the file. This is purposely similar to the same feature in RCS and CVS. However, Subversion only does keyword expansion when this property is set, and only for the keywords listed in the property's value. The list of recognized keywords is provided shortly.

svn:log

The log message associated with the commit of a particular revision.

svn:mime-type

An indication of the type of data stored in the file. In general, if it does not begin with text/, Subversion assumes that the file contains binary data. For updates, this causes Subversion to rename a modified working copy of the file with a .orig extension and replace the file with the current version from the repository. This prevents an attempt to perform a "merge" on data that can't be merged. This property also influences how the Subversion Apache module sets the HTTP Content-type: header.

svn:realmstring

A specialized property that describes the "authentication realm" for a file in Subversion's cached copy of the authentication credentials. See Chapter 6 of Version Control with Subversion for more information.

Subversion defines the list of keywords available for substitution. That list contains the following five keywords, some of which have shorter aliases that you can also use:

$LastChangedDate$

This keyword describes the last time the file was changed in the repository, and looks like $LastChangedDate: 2002-07-22 21:42:37 -0700 (Mon, 22 Jul 2002) $. It may be abbreviated as Date.

$LastChangedRevision$

This keyword describes the last revision in which this file changed in the repository, and looks like $LastChangedRevision: 144 $. It may be abbreviated as Revision or Rev.

$LastChangedBy$

This keyword describes the last user to change this file in the repository, and looks like $LastChangedBy: joe $. It may be abbreviated as Author.

$HeadURL$

This keyword describes the full URL to the latest version of the file in the repository. It looks like $HeadURL: http://svn.collab.net/repos/trunk/README $. It may be abbreviated as URL.

$Id: ch15.xml,v 1.1 2005/11/28 20:16:26 ellie Exp ellie $

This keyword is a compressed combination of the other keywords. Its substitution looks like $Id: ch15.xml,v 1.1 2005/11/28 20:16:26 ellie Exp ellie $, and is interpreted to mean that the file calc.c was last changed in revision 148 on the evening of July 28, 2002 by the user sue.

Obtaining Subversion

The Subversion project web site is http://subversion.tigris.org/. It contains links to project documentation, Frequently Asked Questions (FAQs), and project source code.

Some GNU/Linux systems come with Subversion available on the installation CDs. Thus, you may be able to install a pre-built binary for your system, or use a package manager to download and install it.

Subversion Releases

Subversion uses the "even/odd" release model. Even numbered point releases (1.0, 1.2, etc.) are considered to be stable releases. Such releases undergo change only to fix problems. New features are not added, and users can expect to use the software without problems. Odd numbered point releases (1.1, 1.3, etc.), on the other hand, are development versions. New features are added in such versions, they tend to undergo rapid change and evolution, and such releases may have bugs or problems that could cause loss of data. You should use an even-numbered release if stability and data preservation are important to you. Use an odd-numbered release only if it has a critical, must-have feature and if you are willing to live with the risks involved.

A View Down the Road

The one constant in the Open Source world is change. At the time of writing, Subversion 1.0 is the current released stable version. The first development release of Subversion 1.1 is also available. Along with a host of fixes and several new command-line options, the next version has the following interesting features:

Symbolic links may be versioned

Unix-style symbolic links are stored in the repository as a regular file with a special attribute. The svn client knows how to store and extract symbolic links correctly on Unix-style systems.

Nondatabase repository back-end

Repositories can be set up to store data in regular files, instead of requiring the use of Berkeley DB.

Better localization support

The framework for localization of the Subversion code has been improved, with at least eight translations already available.

The Subversion web site's Roadmap page (http://subversion.tigris.org/roadmap.html ) lists the following future development goals (you should recheck the web site; things will undoubtedly have changed):

Subversion 1.2 goals

Optional locking (reserved checkouts)

Medium-term goals

True rename support (not based on copy/delete)

Merge tracking (describes a whole class of problems)

Repository-level Access Control Lists (ACLs)[*]

Long-term goals

SQL repository back-end

Rewrite of working-copy library

Broader WebDAV/deltaV compatibility[†]

Pluggable client-side diff programs

Progressive multilingual support

Source Code

The latest Subversion source is kept in a Subversion archive available from the main Subversion site. This leads to a so-called bootstrapping problem; you can't get Subversion unless you already have it. Fortunately, the developers make Subversion releases available as standalone tar archives that you can use to build your initial Subversion client. You can get these from the main web site, http://subversion.tigris.org. Once there, select the "Downloads" link. You may choose to download a binary distribution (Red Hat RPM file, Debian package, etc.), if one is available. This is the easiest road to take. Or you may choose to download source code and build your own. Building Subversion follows the general steps outlined in the section "Building Software," in Chapter 1.

[*] ACLs provide finer-grained access controls than the regular Unix user/group/other permissions mechanism. Many Unix systems support some form of ACLs, but in incompatible ways.

[†] WebDAV is short for "Web-based Distributed Authoring and Versioning," an extension to HTTP that makes read/write file resources available over the Web. Despite the "V" in the name, the original specification (RFC 2518) does not provide a model for version control; this is provided by DeltaV, described in RFC 3253. See http://www.webdav.org for more information.

Using Subversion: A Quick Tour

This section provides a very quick tour of using Subversion for version control. We start with the initial version of a project for importing into Subversion:

    $ find /tmp/hello -print
               Show directory layout
    /tmp/hello
    /tmp/hello/branches                       Directory for branch development
    /tmp/hello/tags                           Directory for tagged releases
    /tmp/hello/trunk
    /tmp/hello/trunk/hello.c                  Mainline development is done on the trunk
    /tmp/hello/trunk/Makefile
    /tmp/hello/trunk/README

The next steps are to create the repository and then to import the project into it:

    $ svnadmin create /path/to/svnrepos
    $ svn import /tmp/hello file:///path/to/svnrepos -m "initial import"
    Adding         /tmp/hello/trunk
    Adding         /tmp/hello/trunk/hello.c
    Adding         /tmp/hello/trunk/Makefile
    Adding         /tmp/hello/trunk/README
    Adding         /tmp/hello/branches
    Adding         /tmp/hello/tags

    Committed revision 1.

Now that the project exists in Subversion, we check out a working copy into a sandbox underneath our home directory and start making changes:

    $ cd
               Move to home directory
    $ svn checkout file:///path/to/svnrepos hello
               Check out working copy
    A  hello/trunk
    A  hello/trunk/hello.c
    A  hello/trunk/README
    A  hello/trunk/Makefile
    A  hello/branches
    A  hello/tags
    Checked out revision 1.

    $ cd hello/trunk
               Change to sandbox
    $ vi message.c hello.c Makefile
               Make changes
    3 files to edit

    $ cat message.c
               Show newly created file
    const char message[  ] = "hello, world!";
    $ make
               Compile program and test it
    cc    -c -o hello.o hello.c
    cc    -c -o message.o message.c
    cc -O hello.o message.o -o hello
    $ hello
    hello, world!

One of the most common operations is to compare the changed copy with the original. The result is in "unified diff" format, the equivalent of the regular diff -u command:

    $ svn diff hello.c
    Index: hello.c
    ===================================================================
    --- hello.c     (revision 1)
    +++ hello.c     (working copy)
    @@ -1,7 +1,9 @@
     #include <stdio.h>

    +extern const char message[  ];
    +
     int main(void)
     {
    -       printf("hello, world!\n");
    +       printf("%s\n", message);
            return 0;
     }

Now that we're comfortable with the changes, we schedule the new file, message.c, for addition to the repository, and then we actually commit our changes:

    $ svn add message.c
               Schedule message.c for addition
    A         message.c
    $ svn commit
               Commit all the changes
    Sending        trunk/Makefile
    Sending        trunk/hello.c
    Adding         trunk/message.c
    Transmitting file data ...
    Committed revision 2.

Finally, we can view all of our changes relative to the initial revision:

    $ svn diff -r 1
    Index: hello.c
    ===================================================================
    --- hello.c     (revision 1)
    +++ hello.c     (working copy)
    @@ -1,7 +1,9 @@
     #include <stdio.h>

    +extern const char message[  ];
    +
     int main(void)
     {
    -       printf("hello, world!\n");
    +       printf("%s\n", message);
            return 0;
     }
    Index: Makefile
    ===================================================================
    --- Makefile    (revision 1)
    +++ Makefile    (working copy)
    @@ -1,2 +1,2 @@
    -hello: hello.c
    -       $(CC) -O $< -o $@
    +hello: hello.o message.o
    +       $(CC) -O hello.o message.o -o $@
    Index: message.c
    ===================================================================
    --- message.c   (revision 0)
    +++ message.c   (revision 2)
    @@ -0,0 +1 @@
    +const char message[  ] = "hello, world!";

The Subversion Command Line Client: svn

The syntax for the Subversion command line client, svn, is:

    svn [options

] subcommand [arguments]

The options and subcommand may be provided in any order.

svn Options

While Subversion has different options for its subcommands, all options are global—that is, each option is guaranteed to mean the same thing regardless of the subcommand that you use it with. For example, --verbose (-v) always means "verbose output," no matter which subcommand you use it with.

--auto-props

Enable auto-props, overriding the enable-auto-props directive in the config file.

--config-dir dir

Read configuration information from the specified directory instead of the default location (.subversion in the user's home directory).

--diff-cmd cmd

Use cmd as the external program to show differences between files. Normally, svn diff uses Subversion's internal diff engine, which provides unified diffs by default. To use an external diff program, use --diff-cmd. You can pass options to the diff program with the --extensions option (discussed later in this list).

--diff3-cmd cmd

Use cmd as the external program to merge files.

--dry-run

Pretend to run a command, but make no actual changes—either in the sandbox or in the repository.

--editor-cmd cmd

Use cmd as the program for editing a log message or a property value. If not set, Subversion checks the environment variables SVN_EDITOR, VISUAL, and EDITOR, in that order, for the name of the editor to use.

--encoding enc

Use enc as the encoding for the commit message. The default encoding is your operating system's native locale, and you should specify the encoding if your commit message is in any other encoding.

--extensionsargs, -xargs

Pass args to an external diff command when providing differences between files. To pass multiple arguments, enclose all of them in quotes (for example, svn diff --diff-cmd /usr/bin/diff -x "-b -E"). This option can be used only if you also pass the --diff-cmd option.

--filefilename, -Ffilename

Use the contents of filename for the specified subcommand.

--force

Force a particular command or operation to run. There are some operations that Subversion prevents you from doing in normal usage, but you can pass this option to tell Subversion "I know what I'm doing as well as the possible repercussions of doing it, do it anyway." Use with caution.

--force-log

Force a suspicious parameter passed to the --message (-m) or --file (-F) options to be accepted as valid. By default, Subversion produces an error if parameters to these options look like they might instead be targets of the subcommand. For example, if you pass a versioned file's path to the --file (-F) option, Subversion assumes that you've made a mistake, that the path was instead intended as the target of the operation, and that you simply failed to provide some other—unversioned--file as the source of your log message. To assert your intent and override these types of errors, pass the --force-log option to commands that accept log messages.

--help, -h, -?

If used with one or more subcommands, show the built-in help text for each subcommand. If used alone, display the general client help text.

--ignore-ancestry

Ignore ancestry when calculating differences (i.e., rely on path contents alone).

--incremental

Print output in a format suitable for concatenation.

--messagemessage, -mmessage

Use message as the commit message. For example:

    $ svn commit -m "They don't make Sunday."

--new arg

Use arg as the newer target when producing a diff.

--no-auth-cache

Do not cache authentication information (e.g., username and password) in the Subversion administrative directories.

--no-auto-props

Disable auto-props, overriding the enable-auto-props directive in the config file.

--no-diff-deleted

Do not print differences for deleted files. The default behavior when you remove a file is for svn diff to print the same differences that you would see if you had left the file but removed all the content.

--no-ignore

Show files in the status listing that would normally be omitted since they match a pattern in the svn:ignore property.

--non-interactive

In the case of an authentication failure, or insufficient credentials, do not prompt for credentials (e.g., username or password). This is useful if you're running Subversion inside of an automated script where it's better to have Subversion fail instead of trying to prompt for more information.

--non-recursive, -N

Stop a subcommand from recursing into subdirectories. Most subcommands recurse by default, but some subcommands—usually those that have the potential to remove or undo your local modifications—do not.

--notice-ancestry

Pay attention to ancestry when calculating differences.

--old arg

Use arg as the older target when producing a diff.

--password pass

Use pass as the password for authentication on the command line—otherwise, if it is needed, Subversion prompts you for it.

--quiet, -q

Print only essential information while performing an operation.

--recursive, -R

Make a subcommand recurse into subdirectories. Most subcommands recurse by default.

--relocatefrom to[path ...]

Used with the svn switch subcommand to change the location of the repository that your working copy references. This is useful if the location of your repository changes and you have an existing working copy that you'd like to continue to use. See svn switch for an example.

--revisionrev, -rrev

Use rev as the revision (or range of revisions) for a particular operation. You can provide revision numbers, revision keywords, or dates (in curly braces), as arguments to the revision option. To provide a range of revisions, provide two revisions separated by a colon. For example:

    $ svn log -r 1729
    $ svn log -r 1729:HEAD
    $ svn log -r 1729:1744
    $ svn log -r {2001-12-04}:{2002-02-17}
    $svn log -r 1729:{2002-02-17}

The list of revision keywords is provided later in this section.

--revprop

Operate on a revision property instead of a Subversion property specific to a file or directory. This option requires that you also pass a revision with the --revision (-r) option.

--show-updates, -u

Display information about which files in your working copy are out-of-date. This doesn't actually update any of your files, it just shows you which files will be updated if you run svn update.

--stop-on-copy

Cause a Subversion subcommand that is traversing the history of a versioned resource to stop harvesting that historical information when it encounters a copy—that is, a location in history where that resource was copied from another location in the repository.

--strict

Use strict semantics, a notion that is rather vague unless talking about specific subcommands. See Version Control with Subversion for more information.

--targets filename

Retrieve the list of files to operate on from filename instead of listing all the files on the command line.

--username name

Use name as the username for authentication—otherwise, if it is needed, Subversion prompts you for it.

--verbose, -v

Print out as much information as possible while running any subcommand. This may result in Subversion printing out additional fields, detailed information about every file, or additional information regarding its actions.

--version

Print the client version info. This information not only includes the version number of the client, but also a listing of all repository access modules that the client can use to access a Subversion repository.

--xml

Print output in XML format.

The acceptable revision keywords for --revision are:

BASE

The original unmodified version of the working copy. This keyword cannot refer to a URL.

COMMITTED

The last revision, before or at BASE, at which an item actually changed. This keyword cannot refer to a URL.

HEAD

The most recent revision in the repository.

PREV

The revision just before that at which an item changed. Equivalent to COMMITED - 1. This keyword cannot refer to a URL.

Revision Date

A date specification enclosed in curly braces, { and }, such as {2002-02-17}, {15:30}, {"2002-02-17 15:30"}, {2002-02-17T15:30}, or {20020217T1530-0500}. Full details are provided in Version Control with Subversion.

svn Subcommands

The svn command is the main user interface to Subversion. It works by accepting subcommands with arguments. The general form is:

    svn subcommand [options]arguments

Name

add

Synopsis

svn add path ...

Add files and directories to your working copy and schedule them for addition to the repository. They will be uploaded and added to the repository on your next commit. If you add something and change your mind before committing, you can unschedule the addition using svn revert.

Alternate Names:

None

Changes:

Working Copy

Accesses Repository:

No

Options

--auto-props

--non-recursive (-N)

--config-dir dir

--quiet (-q)

--no-auto-props

--targets filename

Examples

To add a file to your working copy:

    $ svn add foo.c
    A         foo.c

You can add a directory without adding its contents:

    $ svn add --non-recursive otherdir
    A         otherdir

Name

blame

Synopsis

svn
 blame target ...

Show author and revision information in-line for the specified files or URLs. Each line of text is annotated at the beginning with the author (username) and the revision number for the last change to that line.

Alternate Names:

praise, annotate, ann

Changes:

Nothing

Accesses Repository:

Yes

Options

--config-dir dir

--password pass

--no-auth-cache

--revisionrev, -rrev

--non-interactive

--username user

Name

cat

Synopsis

svn cat target ...

Output the contents of the specified files or URLs. For listing the contents of directories, see svn list.

Alternate Names:

None

Changes:

Nothing

Accesses Repository:

Yes

Options

--config-dir dir

--password pass

--no-auth-cache

--revisionrev, -rrev

--non-interactive

--username user

Examples

To view readme.txt in your repository without checking it out:

    $ svn cat http://svn.red-bean.com/repos/test/readme.txt
    This is a README file.
    You should read this.

Tip

If your working copy is out of date (or if you have local modifications) and you want to see the HEAD revision of a file in your working copy, svn cat automatically fetches the HEAD revision when you give it a path:

    $ cat foo.c
    This file is in my local working copy
    and has changes that I've made.

    $ svn cat foo.c
    Latest revision fresh from the repository!

Name

checkout

Synopsis

svn
 checkout URL ... [path]

Check out a working copy from a repository. If path is omitted, the basename of the URL is used as the destination. If multiple URLs are given, each one is checked out into a subdirectory of path, with the name of the subdirectory being the basename of the URL.

Alternate Names:

co

Changes:

Creates a working copy

Accesses Repository:

Yes

Options

--config-dir dir

--password pass

--no-auth-cache

--quiet (-q)

--non-interactive

--revisionrev, -rrev

--non-recursive (-N)

--username user

Examples

Check out a working copy into a directory called mine:

    $ svn checkout file:///tmp/repos/test mine
    A  mine/a
    A  mine/b
    Checked out revision 2.
    $ ls
    mine

If you interrupt a checkout (or something else interrupts your checkout like loss of connectivity, etc.), you can restart it either by issuing the identical checkout command again, or by updating the incomplete working copy:

    $ svn checkout file:///tmp/repos/test test
    A  test/a
    A  test/b
    ^C
    svn: The operation was interrupted
    svn: caught SIGINT

    $ svn checkout file:///tmp/repos/test test
    A  test/c
    A  test/d
    ^C
    svn: The operation was interrupted
    svn: caught SIGINT

    $ cd test
    $ svn update
    A  test/e
    A  test/f
    Updated to revision 3.

Name

cleanup

Synopsis

svn
 cleanup [path ...]

Recursively clean up the working copy, removing locks and resuming unfinished operations. If you ever get a "working copy locked" error, run this command to remove stale locks and get your working copy into a usable state again.

If, for some reason, an svn update fails due to a problem running an external diff program (e.g., user input or network failure), pass the --diff3-cmd option to allow cleanup to complete any merging with your external diff program. You can also specify any configuration directory with the --config-dir option, but you should rarely need these options.

Alternate Names:

None

Changes:

Working copy

Accesses Repository:

No

Options:

--config-dir dir

--diff3-cmd cmd

Name

commit

Synopsis

svn commit [path ...]

Send changes from your working copy to the repository. If you don't supply a log message with your commit by using either the --file or --message option, svn starts your editor for you to compose a commit message.

Tip

If you begin a commit and Subversion starts your editor to compose the commit message, you can still abort without committing your changes. To cancel your commit, just quit your editor without saving your commit message. Subversion prompts you to either abort the commit, continue with no message, or edit the message again.

Alternate Names:

ci (short for "check in," not co, which is short for "check out")

Changes:

Working copy, repository

Accesses Repository:

Yes

Options

--config-dir dir

--non-interactive

--encoding enc

--non-recursive (-N)

--filefile, -Ffile

--password pass

--force-log

--quiet (-q)

--messagetext, -mtext

--targets filename

--no-auth-cache

--username user

Examples

Commit a simple modification to a file with the commit message on the command line and an implicit target of your current directory ("."):

    $ svn
 commit -m "added howto section."
    Sending        a
    Transmitting file data .
    Committed revision 3.

To commit a file scheduled for deletion:

    $ svn commit -m "removed file 'c'."
    Deleting       c
    Committed revision 7.

Name

copy

Synopsis

svn copy src dst

Copy a file in a working copy or in the repository. src and dst can each be either a working copy (WC) path or a URL:

WC → WC

Copy and schedule an item for addition (with history).

WC → URL

Immediately commit a copy of WC to URL.

URL → WC

Check out URL into WC, and schedule it for addition.

URL → URL

Complete server-side copy. This is usually used to branch and tag.

Tip

You can only copy files within a single repository. Subversion does not support cross-repository copying.

Alternate Names:

cp

Changes:

Repository if destination is a URL

Working copy if destination is a WC path

Accesses Repository:

If source or destination is in the repository, or if needed to look up the source revision number

Options

--config-dir dir

--no-auth-cache

--editor-cmd editor

--non-interactive

--encoding enc

--password pass

--filefile, -Ffile

--quiet (-q)

--force-log

--revisionrev, -rrev

--messagetext, -mtext

--username user

Examples

Copy an item within your working copy (just schedule the copy—nothing goes into the repository until you commit):

    $ svn
 copy foo.txt bar.txt
    A         bar.txt
    $ svn status
    A  +   bar.txt

Copy an item from the repository to your working copy (just schedule the copy—nothing goes into the repository until you commit):

    $ svn copy file:///tmp/repos/test/far-away near-here
    A         near-here

Tip

This is the recommended way to resurrect a dead file in your repository!

And finally, copying between two URLs:

    $ svn copy file:///tmp/repos/test/far-away \
    >          file:///tmp/repos/test/over-there -m "remote copy."
    Committed revision 9.

Tip

This is the easiest way to "tag" a revision in your repository—just svn copy that revision (usually HEAD) into your tags directory.

    $ svn copy file:///tmp/repos/test/trunk \
    >          file:///tmp/repos/test/tags/0.6.32-prerelease \
    >          -m "tag tree"
    Committed revision 12.

Name

delete

Synopsis

svn delete path ...
svn delete URL ...

Items specified by path are scheduled for deletion upon the next commit. Files (and directories that have not been committed) are immediately removed from the working copy. The command will not remove any unversioned or modified items; use the --force option to override this behavior.

Items specified by URL are deleted from the repository via an immediate commit. Multiple URLs are committed atomically.

Alternate Names:

del, remove, rm

Changes:

Working copy if operating on files

Repository if operating on URLs

Accesses Repository:

Only if operating on URLs

Options

--config-dir dir

--no-auth-cache

--editor-cmd editor

--non-interactive

--encoding enc

--password pass

--filefile, -Ffile

--quiet (-q)

--force-log

--targets filename

--force

--username user

--messagetext, -mtext

Name

diff

Synopsis

svn

 diff [-r N[:M]] [--old old-tgt][--new new-tgt] [path ...]
svn diff -r N:M URLsvn diff [-r N[:M]] URL1[@N] URL2[@M]

Display the differences between two paths. The three different ways you can use svn diff are:

svn diff [-rN[:M]] [--oldold-tgt] [--newnew-tgt] [path ...]

Display the differences between old-tgt and new-tgt. If paths are given, they are treated as relative to old-tgt and new-tgt and the output is restricted to differences in only those paths. old-tgt and new-tgt may be working copy paths or URL[@ rev]. old-tgt defaults to the current working directory and new-tgt defaults to old-tgt. N defaults to BASE or, if old-tgt is a URL, to HEAD. M defaults to the current working version or, if new-tgt is a URL, to HEAD. svn diff -r N sets the revision of old-tgt to N, whereas svn diff -r N : M also sets the revision of new-tgt to M.

svn diff -r N : M URL

A shorthand for svn diff -r N : M --old= URL --new= URL.

svn diff [-r N [: M ]] URL1 [@ N ] URL2 [@ M ]

A shorthand for svn diff [-r N[: M]] --old= URL1 --new= URL2.

If target is a URL, then revisions N and M can be given either via the --revision option or by using "@" notation as described earlier.

If target is a working copy path, then the --revision option means:

--revision N : M

The server compares target @ N and target @ M.

--revision N

The client compares target @ N against the working copy.

No --revision option

The client compares the base and working copies of target.

If the alternate syntax is used, the server compares URL1 and URL2 at revisions N and M respectively. If either N or M are omitted, a value of HEAD is assumed.

By default, svn diff ignores the ancestry of files and merely compares the contents of the two files being compared. If you use --notice-ancestry, the ancestry of the paths in question is taken into consideration when comparing revisions (that is, if you run svn diff on two files with identical contents but different ancestry you will see the entire contents of the file as having been removed and added again).

Alternate Names:

di

Changes:

Nothing

Accesses Repository:

For obtaining differences against anything but the BASE revision in your working copy

Options

--config-dir dir

--non-recursive (-N)

--diff-cmd cmd

--notice-ancestry

--extensionsargs, -xargs

--old old-target

--new new-target

--password pass

--no-auth-cache

--revisionrev, -rrev

--no-diff-deleted

--username user

--non-interactive

Examples

Compare BASE and your working copy:

    $ svn
 diff COMMITTERS
    Index: COMMITTERS
    ==========================================================
    --- COMMITTERS  (revision 4404)
    +++ COMMITTERS  (working copy)
    ...

See how your working copy's modifications compare against an older revision:

    $ svn diff -r 3900 COMMITTERS
    Index: COMMITTERS
    ==========================================================
    --- COMMITTERS  (revision 3900)
    +++ COMMITTERS  (working copy)
    ...

Use --diff-cmd cmd and -x to pass arguments directly to the external diff program:

    $ svn diff --diff-cmd /usr/bin/diff -x "-i -b" COMMITTERS
    Index: COMMITTERS
    ==========================================================
    0a1,2
    > This is a test
    >

Name

export

Synopsis

svn export [-r rev] URL [path]
svn exportpath1 path2

The first form exports a clean directory tree from the repository specified by URL (at revision rev if it is given, otherwise at HEAD) into path. If path is omitted, the last component of the URL is used for the local directory name.

The second form exports a clean directory tree from the working copy specified by path1 into path2. All local changes are preserved, but files not under version control are not copied.

Alternate Names:

None

Changes:

Local disk

Accesses Repository:

Only if exporting from a URL

Options

--config-dir dir

--password pass

--force

--quiet (-q)

--no-auth-cache

--revisionrev, -rrev

--non-interactive

--username user

Name

help

Synopsis

svn

 help [subcommand ...]

Provide a quick usage summary. With subcommand, provide information about the given subcommand.

Alternate Names:

?, h

Changes:

Nothing

Accesses Repository:

No

Options

--quiet (-q)

--version

Name

import

Synopsis

svn import [path]URL

Recursively commit a copy of path to URL. If path is omitted "." is assumed. Parent directories are created in the repository as necessary.

Alternate Names:

None

Changes:

Repository

Accesses Repository:

Yes

Options

--auto-props

--no-auth-cache

--config-dir dir

--no-auto-props

--editor-cmd editor

--non-interactive

--encoding enc

--non-recursive (-N)

--filefile, -Ffile

--password pass

--force-log

--quiet (-q)

--messagetext, -mtext

--username user

Examples

Import the local directory myproj into the root of your repository:

    $ svn
 import -m "New import" myproj \
    > http://svn.red-bean.com/repos/test
    Adding         myproj/sample.txt
    ...
    Transmitting file data .........
    Committed revision 16.

Import the local directory myproj into trunk/vendors in your repository. The directory trunk/vendors need not exist before you import into it--svn import will recursively create directories for you:

    $ svn import -m "New import" myproj \
    > http://svn.red-bean.com/repos/test/trunk/vendors/myproj
    Adding         myproj/sample.txt
    ...
    Transmitting file data .........
    Committed revision 19.

After importing data, note that the original tree is not under version control. To start working, you still need to svn checkout a fresh working copy of the tree.

Name

info

Synopsis

svn info [path ...]

Print information about paths in your working copy, including:

Path

Name

URL

Revision

Node Kind

Last Changed Author

Last Changed Revision

Last Changed Date

Text Last Updated

Properties Last Updated

Checksum

Alternate Names:

None

Changes:

Nothing

Accesses Repository:

No

Options

--config-dir dir

--recursive (-R)

--targets filename

Name

list

Synopsis

svn

 list [target ...]

List each target file and the contents of each target directory as they exist in the repository. If target is a working copy path, the corresponding repository URL is used. The default target is ".", meaning the repository URL of the current working copy directory.

With --verbose, the following fields show the status of the item:

Revision number of the last commit

Author of the last commit

Size (in bytes)

Date and time of the last commit

Alternate Names:

ls

Changes:

Nothing

Accesses Repository:

Yes

Options

--config-dir dir

--recursive (-R)

--no-auth-cache

--revisionrev, -rrev

--non-interactive

--username user

--password pass

--verbose (-v)

Examples

To see what files a repository has without downloading a working copy:

    $ svn list http://svn.red-bean.com/repos/test/support
    README.txt
    INSTALL
    examples/
    ...

Pass the --verbose option for additional information:

    $ svn list --verbose file:///tmp/repos
         16 sue         28361 Jan 16 23:18 README.txt
         27 sue             0 Jan 18 15:27 INSTALL
         24 joe               Jan 18 11:27 examples/

Name

log

Synopsis

svn log [path]
svn log URL [path ...]

The default target is the path of your current directory. If no arguments are supplied, svn log shows the log messages for all files and directories inside of (and including) the current working directory of your working copy. You can refine the results by specifying a path, one or more revisions, or any combination of the two. The default revision range for a local path is BASE:1.

If you specify a URL alone, svn log prints log messages for everything that the URL contains. If you add paths past the URL, only messages for those paths under that URL are printed. The default revision range for a URL is HEAD:1.

With --verbose, svn log also prints all affected paths with each log message. With --quiet, svn log does not print the log message body itself (this is compatible with --verbose).

Each log message is printed just once, even if more than one of the affected paths for that revision were explicitly requested. Logs follow copy history by default. Use --stop-on-copy to disable this behavior, which can be useful for determining branch points.

Alternate Names:

None

Changes:

Nothing

Accesses Repository:

Yes

Options

--config-dir dir

--revisionrev, -rrev

--incremental

--stop-on-copy

--no-auth-cache

--targets filename

--non-interactive

--username user

--password pass

--verbose (-v)

--quiet (-q)

--xml

Examples

To see the log messages for all the paths that changed in your working copy, run svn log from the top (some long output lines have wrapped):

    $ svn log
    -------------------------------------------------------------------
    r20 | joe | 2003-01-17 22:56:19 -0600 (Fri, 17 Jan 2003) | 1 line
    Tweak.
    -------------------------------------------------------------------
    r17 | sue | 2003-01-16 23:21:19 -0600 (Thu, 16 Jan 2003) | 2 lines
    ...

If you don't have a working copy handy, you can log a URL:

    $ svn log http://svn.red-bean.com/repos/test/foo.c
    -------------------------------------------------------------------
    r32 | sue | 2003-01-13 00:43:13 -0600 (Mon, 13 Jan 2003) | 1 line

    Added defines.
    -------------------------------------------------------------------
    r28 | sue | 2003-01-07 21:48:33 -0600 (Tue, 07 Jan 2003) | 3 lines
    ...

Tip

If you run svn log on a specific path and provide a specific revision and get no output at all:

    $ svn log -r 20
    > http://svn.red-bean.com/untouched.txt
    -------------------------------------------------

then that just means that the path was not modified in that revision. If you log from the top of the repository, or know the file that changed in that revision, you can specify it explicitly:

    $ svn log -r 20 touched.txt
    -------------------------------------------------
    r20 | sue | 2003-01-17 22:56:19 -0600 (Fri, 17 Jan 2003) | 1 line

    Made a change.
    -------------------------------------------------

Name

merge

Synopsis

svn merge sourceURL1[@N] sourceURL2[@M] [wcpath]
svn merge -r N:M source [path]

In the first form, the source URLs are specified at revisions N and M. These are the two sources to be compared. The revisions default to HEAD if omitted.

In the second form, source can be a URL or working copy item, in which case the corresponding URL is used. This URL, at revisions N and M, defines the two sources to be compared.

wcpath is the working copy path that will receive the changes. If wcpath is omitted, a default value of "." is assumed, unless the sources have identical basenames that match a file within ".", in which case, the differences are applied to that file.

Unlike svn diff, this command takes the ancestry of a file into consideration when performing a merge operation. This is very important when you're merging changes from one branch into another and you've renamed a file on one branch but not the other.

Alternate Names:

None

Changes:

Working copy

Accesses Repository:

Only if working with URLs

Options

--config-dir dir

--non-interactive

--diff3-cmd cmd

--non-recursive (-N)

--dry-run

--password pass

--force

--quiet (-q)

--ignore-ancestry

--revisionrev, -rrev

--no-auth-cache

--username user

Examples

Merge a branch back into the trunk (assuming that you have a working copy of the trunk, and that the branch was created in revision 250):

    $ svn

 merge -r 250:HEAD \
    >         http://svn.red-bean.com/repos/branches/my-branch
    U  myproj/tiny.txt
    U  myproj/thhgttg.txt
    U  myproj/win.txt
    U  myproj/flo.txt

If you branched at revision 23, and you want to merge changes from the trunk into your branch, you could do this from inside the working copy of your branch:

    $ svn merge -r 23:30 file:///tmp/repos/trunk/vendors
    U  myproj/thhgttg.txt
    ...

To merge changes to a single file:

    $ cd myproj
    $ svn merge -r 30:31 thhgttg.txt
    U  thhgttg.txt

Name

mkdir

Synopsis

svn mkdir path ...
svn mkdir URL ...

Create a directory with a name given by the final component of the path or URL. A directory specified by a working copy path is scheduled for addition in the working copy. A directory specified by a URL is created in the repository via an immediate commit. Multiple directory URLs are committed atomically. In both cases all the intermediate directories must already exist.

Alternate Names:

None

Changes:

Working copy; repository if operating on a URL

Accesses Repository:

Only if operating on a URL

Options

--config-dir dir

--no-auth-cache

--editor-cmd editor

--non-interactive

--encoding enc

--password pass

--filefile, -Ffile

--quiet (-q)

--force-log

--username user

--messagetext, -mtext

Name

move

Synopsis

svn move src dst

This command moves (renames) a file or directory in your working copy or in the repository.

Tip

This command is equivalent to an svn copy followed by svn delete.

WC → WC

Move and schedule a file or directory for addition (with history).

URL → URL

Complete server-side rename.

Tip

Subversion does not support moving between working copies and URLs. In addition, you can only move files within a single repository—Subversion does not support cross-repository moving.

Alternate Names:

mv, rename, ren

Changes:

Working copy; repository if operating on a URL

Accesses Repository:

Only if operating on a URL

Options

--config-dir dir

--no-auth-cache

--editor-cmd editor

--non-interactive

--encoding enc

--password pass

--filefile, -Ffile

--quiet (-q)

--force-log

--revisionrev, -rrev

--force

--username user

--messagetext, -mtext

Name

propdel

Synopsis

svn propdel propname [path ...]
svn propdel propname --revprop -r rev [URL]

This removes properties from files, directories, or revisions. The first form removes versioned properties in your working copy, whereas the second removes unversioned remote properties on a repository revision.

Alternate Names:

pdel, pd

Changes:

Working copy; repository only if operating on a URL

Accesses Repository:

Only if operating on a URL

Options

--config-dir dir

--recursive (-R)

--no-auth-cache

--revisionrev, -rrev

--non-interactive

--revprop

--password pass

--username user

--quiet (-q)

Examples

Delete a property from a file in your working copy:

    $ svn
 propdel svn:mime-type some-script
    property 'svn:mime-type' deleted from 'some-script'.

Delete a revision property:

    $ svn propdel --revprop -r 26 release-date
    property 'release-date' deleted from repository revision '26'

Name

propedit

Synopsis

svn propedit propname path ...
svn propedit propname --revprop -r rev [URL]

Edit one or more properties using your favorite editor. The first form edits versioned properties in your working copy, while the second edits unversioned remote properties on a repository revision.

Alternate Names:

pedit, pe

Changes:

Working copy; repository only if operating on a URL

Accesses Repository:

Only if operating on a URL

Options

--config-dir dir

--password pass

--editor-cmd editor

--revisionrev, -rrev

--encoding enc

--revprop

--no-auth-cache

--username user

--non-interactive

Name

propget

Synopsis

svn propget propname [path ...]
svn propget propname --revprop -r rev [URL]

Print the value of a property on files, directories, or revisions. The first form prints the versioned property of an item or items in your working copy, while the second prints the unversioned remote property on a repository revision.

Alternate Names:

pget, pg

Changes:

Working copy; repository only if operating on a URL

Accesses Repository:

Only if operating on a URL

Options

--config-dir dir

--recursive (-R)

--no-auth-cache

--revprop

--non-interactive

--strict

--password pass

--username user

Name

proplist

Synopsis

svn
 proplist propname [path ...]
svn proplist propname --revprop -r rev [URL]

List all properties on files, directories, or revisions. The first form lists versioned properties in your working copy, while the second lists unversioned remote properties on a repository revision.

Alternate Names:

plist, pl

Changes:

Working copy; repository only if operating on a URL

Accesses Repository:

Only if operating on a URL

Options

--config-dir dir

--recursive (-R)

--no-auth-cache

--revisionrev, -rrev

--non-interactive

--revprop

--password pass

--username user

--quiet (-q)

--verbose (-v)

Examples

You can use svn proplist to see the properties on an item in your working copy:

    $ svn proplist foo.c
    Properties on 'foo.c':
      svn:mime-type
      svn:keywords
      owner

But with the --verbose flag, svn proplist is extremely handy as it also shows you the values for the properties:

    $ svn proplist --verbose foo.c
    Properties on 'foo.c':
      svn:mime-type : text/plain
      svn:keywords : Author Date Rev
      owner : sue

Name

propset

Synopsis

svn propset propname [propval] path ...
svn propset propname --revprop -r rev [propval] [URL]

Set propname to propval on files, directories, or revisions. The first example creates a versioned, local property change in the working copy, and the second creates an unversioned, remote property change on a repository revision. The new property value, propval, may be provided literally, or using the -F valfile option.

Alternate Names:

pset, ps

Changes:

Working copy; repository only if operating on a URL

Accesses Repository:

Only if operating on a URL

Options

--config-dir dir

--quiet (-q)

--encoding enc

--recursive (-R)

--filefile, -Ffile

--revisionrev, -rrev

--force

--revprop

--no-auth-cache

--targets filename

--non-interactive

--username user

--password pass

Examples

Set the mimetype on a file:

    $ svn propset svn:mime-type image/jpeg foo.jpg
    property 'svn:mime-type' set on 'foo.jpg'

On a Unix system, if you want a file to have execute permission:

    $ svn propset svn:executable ON somescript
    property 'svn:executable' set on 'somescript'

Tip

By default, you cannot modify revision properties in a Subversion repository. Your repository administrator must explicitly enable revision property modifications by creating a hook named pre-revprop-change.

Name

resolved

Synopsis

svn resolved path ...

Remove the "conflicted" state on working copy files or directories. This command does not semantically resolve conflict markers; it merely removes conflict-related artifact files and allows path to be committed again; that is, it tells Subversion that the conflicts have been "resolved." Use it after you have resolved the conflict in the file.

Alternate Names:

None

Changes:

Working copy

Accesses Repository:

No

Options

--config-dir dir

--recursive (-R)

--quiet (-q)

--targets filename

Example

If you get a conflict on an update, your working copy will contain three additional files:

    $ svn update
    C  foo.c
    Updated to revision 31.
    $ ls
    foo.c                  Merged version with conflict markers
    foo.c.mine             Original working copy version
    foo.c.r30              Unmodified BASE version
    foo.c.r31Unmodified HEAD version

Once you've resolved the conflict and foo.c is ready to be committed, run svn resolved to let your working copy know you've taken care of everything.

Warning

You can just remove the conflict files and commit, but svn resolved fixes up some bookkeeping data in the working copy administrative area in addition to removing the conflict files, so you should use this command.

Name

revert

Synopsis

svn revert path ...

Revert any local changes to a file or directory and resolve any conflicted states. svn revert not only reverts the contents of an item in your working copy, but also any property changes. Finally, you can use it to undo any scheduling operations that you may have done (e.g., files scheduled for addition or deletion can be "unscheduled").

Alternate Names:

None

Changes:

Working copy

Accesses Repository:

No

Options

--config-dir dir

--recursive (-R)

--quiet (-q)

--targets filename

Examples

Discard changes to a file:

    $ svn revert foo.c
    Reverted foo.c

If you want to revert a whole directory of files, use the --recursive flag:

    $ svn revert --recursive .
    Reverted newdir/afile
    Reverted foo.c
    Reverted bar.txt

Tip

If you provide no targets to svn revert, it does nothing—to protect you from accidentally losing changes in your working copy, svn revert requires you to provide at least one target.

Name

status

Synopsis

svn status [path ...]

Print the status of working copy files and directories. With no arguments, print only locally modified items (no repository access). With --show-updates, add working revision and server out-of-date information. With --verbose, print full revision information on every item.

The first five columns in the output are each one character wide, and each column gives you information about different aspects of each working copy item.

The first column indicates that an item was added, deleted, or otherwise changed:

space

No modifications.

A

Item is scheduled for addition.

D

Item is scheduled for deletion.

M

Item has been modified.

C

Item is in conflict with updates received from the repository.

X

Item is related to an externals definition.

I

Item is being ignored (e.g., with the svn:ignore property).

?

Item is not under version control.

!

Item is missing (e.g., you moved or deleted it without using svn). This also indicates that a directory is incomplete (a checkout or update was interrupted).

~

Item is versioned as a directory, but has been replaced by a file, or vice versa.

The second column tells the status of a file's or directory's properties:

space

No modifications.

M

Properties for this item have been modified.

C

Properties for this item are in conflict with property updates received from the repository.

The third column is populated only if the working copy directory is locked:

space

Item is not locked.

L

Item is locked.

The fourth column is populated only if the item is scheduled for addition-with-history:

space

No history scheduled with commit.

+

History scheduled with commit.

The fifth column is populated only if the item is switched relative to its parent:

space

Item is a child of its parent directory.

S

Item is switched.

If you pass the --show-updates option, the out-of-date information appears in the eighth column:

space

The item in your working copy is up-to-date.

*

A newer revision of the item exists on the server.

The remaining fields are variable width and delimited by spaces. The working revision is the next field if the --show-updates or --verbose options are passed.

If the --verbose option is passed, the last committed revision and last committed author are displayed next.

The working copy path is always the final field, so it can include spaces.

Alternate Names:

stat, st

Changes:

Nothing

Accesses Repository:

Only if using --show-updates

Options

--config-dir dir

--password pass

--no-auth-cache

--quiet (-q)

--no-ignore

--show-updates (-u)

--non-interactive

--username user

--non-recursive (-N)

--verbose (-v)

Examples

To find out what changes you have made to your working copy:

    $ svn status wc
     M     wc/bar.c
    A  +   wc/qax.c

To find out what files in your working copy are out-of-date, pass the --show-updates option (this does not make any changes to your working copy). Here you can see that wc/foo.c has changed in the repository since we last updated our working copy:

    $ svn status --show-updates wc
     M           965    wc/bar.c
           *     965    wc/foo.c
    A  +         965    wc/qax.c
    Status against revision:    981

Tip

--show-updates places an asterisk only next to items that are out of date (that is, items that will be updated from the repository if you run svn update). --show-updates does not cause the status listing to reflect the repository's version of the item.

And finally, the most information you can get out of the status subcommand:

    $ svn
 status --show-updates --verbose wc
     M           965       938 sue        wc/bar.c
           *     965       922 joe        wc/foo.c
    A  +         965       687 joe        wc/qax.c
                 965       687 joe        wc/zig.c
    Head revision:   981

Name

switch

Synopsis

svn switch URL [path]

This subcommand updates your working copy to mirror a new URL—usually a URL that shares a common ancestor with your working copy, although not necessarily. This is the Subversion way to move a working copy to a new branch.

Alternate Names:

sw

Changes:

Working copy

Accesses Repository:

Yes

Options

--config-dir dir

--password pass

--diff3-cmd cmd

--quiet (-q)

--no-auth-cache

--relocate

--non-interactive

--revisionrev, -rrev

--non-recursive (-N)

--username user

Examples

If you're currently inside the directory vendors, which was branched to fixed, and you'd like to switch your working copy to that branch:

    $ svn switch http://svn.red-bean.com/repos/branches/fixed .
    U  myproj/foo.txt
    U  myproj/bar.txt
    U  myproj/baz.c
    U  myproj/qux.c
    Updated to revision 31.

And to switch back, just provide the URL to the location in the repository from which you originally checked out your working copy:

    $ svn switch http://svn.red-bean.com/repos/trunk/vendors .
    U  myproj/foo.txt
    U  myproj/bar.txt
    U  myproj/baz.c
    U  myproj/qux.c
    Updated to revision 31.

Tip

You can just switch part of your working copy to a branch if you don't want to switch your entire working copy.

Sometimes an administrator might change the "base location" of your repository—in other words, the contents of the repository doesn't change, but the main URL used to reach the root of the repository does. For example, the hostname may change, or the URL schema, or perhaps just the path that leads to the repository. Rather than check out a new working copy, you can have the svn switch command "rewrite" the beginnings of all the URLs in your working copy. Use the --relocate command to do the substitution. No file contents are changed, nor is the repository contacted. It's similar to running a sed script over your working copy .svn/ directories that runs s/OldRoot/NewRoot/.

    $ cd /tmp
    $ svn checkout file:///tmp/repos test
    A  test/a
    A  test/b
    ...

    $ mv repos newlocation
    $ cd test/

    $ svn update
    svn: Unable to open an ra_local session to URL
    svn: Unable to open repository 'file:///tmp/repos'

    $ svn switch --relocate \
    > file:///tmp/repos file:///tmp/newlocation .
    $ svn update
    At revision 3.

Name

update

Synopsis

svn update [PATH ...]

svn update brings changes from the repository into your working copy. If no revision is given, it brings your working copy up-to-date with the HEAD revision. Otherwise, it synchronizes the working copy to the revision given by the --revision option.

For each updated item, Subversion prints a line starting with a specific character reporting the action taken. These characters have the following meaning:

A

Added

C

Conflict

D

Deleted

G

Merged

U

Updated

A character in the first column signifies an update to the actual file, while updates to the file's properties are shown in the second column.

Alternate Names:

up

Changes:

Working copy

Accesses Repository:

Yes

Tip

If you want to examine an older revision of a single file, you may want to use svn cat.

Options

--config-dir dir

--password pass

--diff3-cmd cmd

--quiet (-q)

--no-auth-cache

--revisionrev, -rrev

--non-interactive

--username user

--non-recursive (-N)

Repository Administration: svnadmin

svnadmin is the administrative tool for monitoring and repairing your Subversion repository.

svnadmin Options

--bdb-log-keep

Disable automatic log removal of database log files. (Berkeley DB-specific)

--bdb-txn-nosync

Disable use of fsync() when committing database transactions. (Berkeley DB-specific)

--bypass-hooks

Bypass the repository hook system.

--clean-logs

Remove unused Berkeley DB logs.

--force-uuid

By default, when loading data into a repository that already contains revisions, svnadmin ignores the UUID from the dump stream. This option causes the repository's UUID to be set to the UUID from the stream.

--ignore-uuid

By default, when loading an empty repository, svnadmin uses the UUID from the dump stream. This option causes that UUID to be ignored.

--incremental

Dump a revision only as a diff against the previous revision, instead of the usual full text.

--parent-dir dir

When loading a dumpfile, root paths at dir instead of /.

--quiet

Do not show normal progress—show only errors.

--revisionrev, -rrev

Specify a particular revision to operate on.

svnadmin Subcommands

The svnadmin command creates and administers the repository. As such, it always operates on local paths, not on URLs.

Name

create

Synopsis

svnadmin create repos_path

Create a new, empty repository at the path provided. If the provided directory does not exist, it is created for you.

Options

--bdb-log-keep

--bdb-txn-nosync

Example

Creating a new repository is just this easy:

    $ svnadmin create /usr/local/svn/repos

Name

deltify

Synopsis

svnadmin deltify [-r lower[:upper]]repos_path

svnadmin deltify exists in 1.0.x only due to historical reasons. This command is deprecated and no longer needed.

It dates from a time when Subversion offered administrators greater control over compression strategies in the repository. This turned out to be a lot of complexity for very little gain, and this "feature" was deprecated.

Options

--quiet

--revisionrev, -rrev

Name

dump

Synopsis

svnadmin dump repos_path [-r lower[:upper]] [--incremental]

Dump the contents of filesystem to standard output in a "dumpfile" portable format, sending feedback to standard error. Dump revisions lower rev through upper rev. If no revisions are given, dump all revision trees. If only lower is given, dump that one revision tree.

Options

--incremental

--quiet

--revisionrev, -rrev

Examples

Dump your whole repository:

    $ svnadmin
 dump /usr/local/svn/repos
    SVN-fs-dump-format-version: 1
    Revision-number: 0
    * Dumped revision 0.
    Prop-content-length: 56
    Content-length: 56
    ...

Incrementally dump a single transaction from your repository:

    $ svnadmin dump /usr/local/svn/repos -r 21 --incremental
    * Dumped revision 21.
    SVN-fs-dump-format-version: 1
    Revision-number: 21
    Prop-content-length: 101
    Content-length: 101
    ...

Name

help

Synopsis

svnadmin help [subcommand ...]

Provide a quick usage summary. With subcommand, provide information about the given subcommand.

Alternate Names:

?, h

Name

hotcopy

Synopsis

svnadmin hotcopy old_repos_path new_repos_path

This subcommand makes a full "hot" backup of your repository, including all hooks, configuration files, and, of course, database files. If you pass the --clean-logs option, svnadmin performs a hotcopy of your repository, and then removes unused Berkeley DB logs from the original repository. You can run this command at any time and make a safe copy of the repository, regardless of whether other processes are using the repository.

Options

--clean-logs

Name

list-dblogs

Synopsis

svnadmin list-dblogs repos_path

List Berkeley DB log files. Berkeley DB creates logs of all changes to the repository, allowing the repository to recover in the face of catastrophe. Unless you enable DB_LOGS_AUTOREMOVE, the log files accumulate, although most are no longer used and can be deleted to reclaim disk space.

Name

list-unused-dblogs

Synopsis

svnadmin list-unused-dblogs repos_path

List unused Berkeley DB log files (see svnadmin list-dblogs).

Example

Remove all unused log files from a repository:

    $ svnadmin
 list-unused-dblogs /path/to/repos | xargs rm
    ## disk space reclaimed!

Name

load

Synopsis

    svnadmin load repos_path

Read a "dumpfile"-formatted stream from standard input, committing new revisions into the repository's filesystem. Send progress feedback to standard output.

Options

--force-uuid

--parent-dir

--ignore-uuid

--quiet (-q)

Examples

This shows the beginning of loading a repository from a backup file (made, of course, with svn dump):

    $ svnadmin load /usr/local/svn/restored < repos-backup
    <<< Started new txn, based on original revision 1
         * adding path : test ... done.
         * adding path : test/a ... done.
    ...

Or, to load into a subdirectory:

    $ svnadmin load --parent-dir new/subdir/for/project \
    >   /usr/local/svn/restored < repos-backup
    <<< Started new txn, based on original revision 1
         * adding path : test ... done.
         * adding path : test/a ... done.
    ...

Name

lstxns

Synopsis

svnadmin lstxns repos_path

Print the names of all uncommitted transactions.

Name

recover

Synopsis

svnadmin recover repos_path

Run this command if you get an error indicating that your repository needs to be recovered.

Name

rmtxns

Synopsis

svnadmin rmtxns repos_path txn_name ...

Delete outstanding transactions from a repository.

Options

--quiet (-q)

Examples

Remove all uncommitted transactions from your repository, using svn lstxns to provide the list of transactions to remove:

    $ svnadmin rmtxns /usr/local/svn/repos/ \
    >'svnadmin lstxns /usr/local/svn/repos/'

Name

setlog

Synopsis

svnadmin setlog repos_path -rrevision file

Set the log message on revision revision to the contents of file.

This is similar to using svn propset --revprop to set the svn:log property on a revision, except you can also use the option --bypass-hooks to avoid running any pre- or post-commit hooks, which is useful if the modification of revision properties has not been enabled in the pre-revprop-change hook.

Warning

Revision properties are not under version control, so this command permanently overwrites the previous log message.

Options

--bypass-hooks

--revisionrev, -rrev

Example

Set the log message for revision 19 to the contents of the file msg:

    $ svnadmin setlog /usr/local/svn/repos/ -r 19 msg

Name

verify

Synopsis

svnadmin verify repos_path

Run this command to verify the integrity of your repository. This iterates through all revisions in the repository by internally dumping all revisions and discarding the output.

Examining the Repository: svnlook

svnlook is a command-line utility for examining different aspects of a Subversion repository. It does not make any changes to the repository. svnlook is typically used by the repository hooks, but a repository administrator might find it useful for diagnostic purposes.

Since svnlook works via direct repository access (and thus can only be used on the machine that holds the repository), it refers to the repository with a path, not a URL.

If no revision or transaction is specified, svnlook defaults to the youngest (most recent) revision of the repository.

svnlook Options

Options in svnlook are global, just like in svn and svnadmin; however, most options only apply to one subcommand since the functionality of svnlook is (intentionally) limited in scope.

--no-diff-deleted

Do not print differences for deleted files. The default behavior when a file is deleted in a transaction/revision is to print the same differences that you would see if you had left the file but removed all the content.

--revisionrev, -rrev

Examine revision number rev.

--show-ids

Show the filesystem node revision IDs for each path in the filesystem tree.

--transactiontid, -ttid

Examine transaction ID tid.

--verbose

Show property values too for the property-related commands.

--version

Display version and copyright information.

svnlook Subcommands

Name

author

Synopsis

svnlook author repos_path

Print the author of a revision or transaction in the repository.

Options

--revisionrev, -rrev

--transactiontid, -ttid

Name

cat

Synopsis

svnlook cat repos_path path_in_repos

Print the contents of a file.

Options

--revisionrev, -rrev

--transactiontid, -ttid

Name

changed

Synopsis

svnlook changed repos_path

Print the paths that were changed in a particular revision or transaction, as well as an svn update-style status letter in the first column: A for added, D for deleted, and U for updated (modified).

Options

--revisionrev, -rrev

--transactiontid, -ttid

Example

Show a list of all the changed files in revision 39 of a test repository:

    $ svnlook

 changed -r 39 /usr/local/svn/repos
    A   trunk/vendors/deli/
    A   trunk/vendors/deli/chips.txt
    A   trunk/vendors/deli/sandwich.txt
    A   trunk/vendors/deli/pickle.txt

Name

date

Synopsis

svnlook date repos_path

Print the datestamp of a revision or transaction in a repository.

Options

--revisionrev, -rrev

--transactiontid, -ttid

Name

diff

Synopsis

svnlook diff repos_path

Print GNU-style differences of changed files and properties in a repository. If a file has a nontextual svn:mime-type property, then the differences are explicitly not shown.

Options

--no-diff-deleted

--revisionrev, -rrev

--transactiontid, -ttid

Name

dirs-changed

Synopsis

svnlook dirs-changed repos_path

Print the directories that were themselves changed (property edits) or whose file children were changed.

Options

--revisionrev, -rrev

--transactiontid, -ttid

Name

help

Synopsis

svnlook help
svnlook -h
svnlook -?

Provide a quick usage summary. With subcommand, provide information about the given subcommand.

Alternate Names:

?, h

Name

history

Synopsis

svnlook

 history repos_path [path_in_repos]

Print information about the history of a path in the repository (or the root directory if no path is supplied).

Options

--revisionrev, -rrev

--show-ids

Example

This shows the history output for the path /tags/1.0 as of revision 20 in our sample repository.

    $ svnlook history -r 20 /usr/local/svn/repos /tags/1.0 \
    > --show-ids
    REVISION   PATH <ID>
    --------   ---------
          19   /tags/1.0 <1.2.12>
          17   /branches/1.0-rc2 <1.1.10>
          16   /branches/1.0-rc2 <1.1.x>
          14   /trunk <1.0.q>
    ...

Name

info

Synopsis

svnlook info repos_path

Print the author, datestamp, log message size, and log message.

Options

--revisionrev, -rrev

--transactiontid, -ttid

Name

log

Synopsis

svnlook log repos_path

Print the log message.

Options

--revisionrev, -rrev

--transactiontid, -ttid

Name

propget

Synopsis

svnlook propget repos_path propname path_in_repos

List the value of a property on a path in the repository.

Alternate Names:

pg, pget

Options

--revisionrev, -rrev

--transactiontid, -ttid

Example

Show the value of the "seasonings" property on the file /trunk/sandwich in the HEAD revision:

    $ svnlook
 pg /usr/local/svn/repos seasonings \
    > /trunk/sandwich
    mustard

Name

proplist

Synopsis

svnlook proplist repos_path path_in_repos

List the properties of a path in the repository. With --verbose, show the property values too.

Alternate Names:

pl, plist

Options

--revisionrev, -rrev

--transactiontid, -ttid

--verbose (-v)

Examples

Show the names of properties set on the file /trunk/README in the HEAD revision:

    $ svnlook proplist /usr/local/svn/repos /trunk/README
    original-author
    svn:mime-type

This is the same command as in the previous example, but this time showing the property values as well:

    $ svnlook proplist --verbose /usr/local/svn/repos \
    > /trunk/README
    original-author : fitz
    svn:mime-type : text/plain

Name

tree

Synopsis

svnlook tree repos_path[path_in_repos]

Print the tree, starting at path_in_repos (if supplied, at the root of the tree otherwise), optionally showing node revision IDs.

Options

--revisionrev, -rrev

--show-ids

--transactiontid, -ttid

Example

This shows the tree output (with node-IDs) for revision 40 in our sample repository:

    $ svnlook tree -r 40 /usr/local/svn/repos --show-ids
    / <0.0.2j>
     trunk/ <p.0.2j>
      vendors/ <q.0.2j>
       deli/ <1g.0.2j>
        egg.txt <1i.e.2j>
        soda.txt <1k.0.2j>
        sandwich.txt <1j.0.2j>

Name

uuid

Synopsis

svnlook uuid repos_path

Print the UUID for the repository. The UUID is the repository's Universal Unique IDentifier. The Subversion client uses this identifier to differentiate between one repository and another.

Name

youngest

Synopsis

svnlook youngest repos_path

Print the youngest revision number of a repository.

Providing Remote Access: svnserve

svnserve provides access to Subversion repositories using the svn network protocol. You can run svnserve either as a standalone server process, or you can have another process, such as inetd, xinetd, or sshd, start it for you.

Once the client has selected a repository by transmitting its URL, svnserve reads a file named conf/svnserve.conf in the repository directory to determine repository-specific settings such as what authentication database to use and what authorization policies to apply. The details are provided in Version Control with Subversion.

svnserve Options

Unlike the previous commands we've described, svnserve has no subcommands--svnserve is controlled exclusively by options.

--daemon, -d

Run in daemon mode. svnserve backgrounds itself and accepts and serves TCP/IP connections on the svn port (3690, by default).

--foreground

When used together with -d, this option causes svnserve to stay in the foreground. This option is mainly useful for debugging.

--help, -h

Display a usage summary and exit.

--inetd, -i

Use the standard input/standard output file descriptors, as is appropriate for a server running out of inetd.

--listen-host = host

Listen on the interface specified by host, which may be either a hostname or an IP address.

--listen-once, -X

Accept one connection on the svn port, serve it, and exit. This option is mainly useful for debugging.

--listen-port = port

Listen on port when run in daemon mode.

--root=root, -r=root

Set the virtual root for repositories served by svnserve to root. The pathnames in URLs provided by the client are interpreted relative to this root, and are not allowed to escape this root.

--threads, -T

When running in daemon mode, spawn a thread instead of a process for each connection. The svnserve process still backgrounds itself at startup time.

--tunnel, -t

Run in tunnel mode, which is just like the inetd mode of operation (serve one connection over standard input/standard output) except that the connection is considered to be pre-authenticated with the username of the current UID. This flag is selected by the client when running over a tunnelling agent such as ssh.

Other Subversion Components

Subversion creates the mod_dav_svn plug-in for use with the Apache 2.0 httpd web server. By running Apache 2.0 with mod_dav_svn, you can make your repository available via the HTTP protocol. Full details are provided in Version Control with Subversion, which is cited in the Bibliography. Two other commands are supplied with Subversion.

Name

svndumpfilter

Synopsis

svndumpfilter subcommand [options] paths ...

Filter out files from a repository dump for use in later repository restoration (see svnadmin dump and svnadmin load).

Subcommands

exclude

Exclude from the dump the files and directories named by paths. Everything else is left in the dump.

help, h, ?

Print a help message and exit.

include

Include in the dump only the files and directories named by paths. Everything else is excluded.

Options

--drop-empty-revs

Remove empty revisions. Such a revision can be created when the original revision contained paths that were filtered out. This option removes such empty revisions from the dump.

--preserve-revprops

If empty revisions are being kept, preserve their revision properties (such as log message, author, date, and so on). Otherwise, empty revisions contain only the original datestamp and a generated log message that the revision was dropped.

--renumber-revs

If empty revisions are being dropped, subsequent revisions are renumbered, so that all revision numbers are contiguous.

Example

Dump the repository, then separate out its two components:

    $ svnadmin dump /path/to/repos > dumpfile
    * Dumped revision 0.
    * Dumped revision 1.
    * Dumped revision 2.
    ...

    $ svndumpfilter include \
    > client < dumpfile > client-dumpfile
    $ svndumpfilter include \
    >server < dumpfile > server-dumpfile

Name

svnversion

Synopsis

svnversion [options] path [URL]

Produce a version number for the working copy in path. The URL is the pathname part of a Subversion URL used to tell if the path was switched (see svn switch).

The output is a single number if the working copy represents an unmodified, non-switched revision whose URL matches the supplied URL.

Options

-c

Report "last changed" revision instead of the current revision.

-n

Do not print the final newline.

Chapter 16. The GNU make Utility

The make program is a long time mainstay of the Unix toolset. It automates the building of software and documentation based on a specification of dependencies among files; e.g., object files that depend upon program source files, or PDF files that depend upon documentation program input files. GNU make is the standard version for GNU/Linux and Mac OS X.

This chapter presents the following topics:

Conceptual overview

Command-line syntax

Makefile lines

Macros

Special target names

Writing command lines

For more information, see Managing Projects with GNU make and GNU Make: A Program for Directing Recompilation, both listed in the Bibliography.

The software download site for GNU make is ftp://ftp.gnu.org/gnu/make/.

Conceptual Overview

The make program generates a sequence of commands for execution by the Unix shell. It uses a table of file dependencies provided by the programmer, and with this information, can perform updating tasks automatically for the user. It can keep track of the sequence of commands that create certain files, and the list of files or programs that require other files to be current before they can be rebuilt correctly. When a program is changed, make can create the proper files with a minimum of effort.

Each statement of a dependency is called a rule. Rules define one or more targets, which are the files to be generated, and the files they depend upon, the prerequisites or dependencies. For example, prog.o would be a target that depends upon prog.c; each time you update prog.c, prog.o must be regenerated. It is this task that make automates, and it is a critical one for large programs that have many pieces.

The file containing all the rules is termed a makefile; for GNU make, it may be named GNUmakefile, makefile or Makefile, in which case make will read it automatically, or you may use a file with a different name and tell make about it with the -f option.

Over the years, different enhancements to make have been made by many vendors, often in incompatible ways. POSIX standardizes how make is supposed to work. Today, GNU make is the most popular version in the Unix world. It has (or can emulate) the features of just about every other version of make, and many Open Source programs require it.

This chapter covers GNU make. Commercial Unix systems come with versions derived from the original System V version; these can be used for bootstrapping GNU make if need be. On the x86 versions of Solaris 10, you can find GNU make in /usr/sfw/bin/gmake. It isn't available on the Sparc version, although it can be easily bootstrapped with the standard version of make in /usr/ccs/bin.

Command-Line Syntax

The make program is invoked as follows:

    make  [options

]  [targets]  [macro definitions]

Options, targets, and macro definitions can appear in any order. The last assignment to a variable is the one that's used. Macro definitions are typed as:

name=string

or

name:=string

For more information, see the section "Creating and Using Macros," later in this chapter.

If no GNUmakefile, makefile, or Makefile exists, make attempts to extract the most recent version of one from either an RCS file, if one exists, or from an SCCS file, if one exists. Note though, that if a real makefile exists, make will not attempt to extract one from RCS or SCCS, even if the RCS or SCCS file is newer than the makefile.

Options

Like just about every other GNU program, GNU make has both long and short options. The available options are as follows:

-b

Silently accepted, but ignored, for compatibility with other versions of make.

-B, --always-make

Treat all targets as out of date. All targets are remade, no matter what the actual status is of their prerequisites.

-Cdir, --directory=dir

Change directory to dir before reading makefiles. With multiple options, each one is relative to the previous. This is usually used for recursive invocations of make.

-d

Print debugging information in addition to regular output. This information includes which files are out of date, the file times being compared, the rules being used to update the targets, and so on. Equivalent to --debug=a.

--debug[ = debug-opt ]

Print debugging information as specified by debug-opt, which is one or more of the following letters, separated by spaces or commas. With no argument, provide basic debugging.

a

All. Enable all debugging.

b

Basic. Print each target that is out of date, and whether or not the build was successful.

i

Implicit. Like basic, but include information about the implicit rules searched for each target.

j

Jobs. Provide information about subcommand invocation.

m

Makefiles. Enable basic debugging, and any of the other options, for description of attempts to rebuild makefiles. (Normally, make doesn't print information about its attempts to rebuild makefiles.)

v

Verbose. Like basic, but also print information about which makefiles were read, and which prerequisites did not need to be rebuilt.

-e, --environment-overrides

Environment variables override any macros defined in makefiles.

-ffile, --file=file, --makefile=file

Use file as the makefile; a filename of - denotes standard input. -f can be used more than once to concatenate multiple makefiles. With no -f option, make first looks for a file named GNUmakefile, then one named makefile, and finally one named Makefile.

-h, --help

Print a usage summary, and then exit.

-i, --ignore-errors

Ignore error codes from commands (same as .IGNORE).

-Idir, --include-dir=dir

Look in dir for makefiles included with the include directive. Multiple options add more directories to the list; make searches them in order.

-j[count], --jobs[=count]

Run commands in parallel. With no count, make runs as many separate commands as possible. (In other words, it will build all the targets that are independent of each other, in parallel.) Otherwise, it runs no more than count jobs. This can decrease the time it takes to rebuild a large project.

-k, --keep-going

Abandon the current target when it fails, but keep working with unrelated targets. In other words, rebuild as much as possible.

-l[load], --load-average[=load], --max-load[=load]

If there are jobs running and the system load average is at least load, don't start any new jobs running. Without an argument, clear a previous limit. The load value is a floating point number.

-m

Silently accepted, but ignored, for compatibility with other versions of make.

-n, --dry-run, --just-print, --recon

Print commands but don't execute (used for testing). -n prints commands even if they begin with @ in the makefile.

Lines that contain $(MAKE) are an exception. Such lines are executed. However, since the -n is passed to the subsequent make in the MAKEFLAGS environment variable, that make also just prints the commands it executes. This allows you to test out all the makefiles in a whole software hierarchy without actually doing anything.

--no-print-directory

Don't print the working directory as make runs recursive invocations. Useful if -w is automatically in effect but you don't want to see the extra messages.

-ofile, --assume-old=file, --old-file=file

Pretend that file is older than the files that depend upon it, even if it's not. This avoids remaking the other files that depend on file. Use this in cases where you know that the changed contents of file will have no effect upon the files that depend upon it; e.g., changing a comment in a header file.

-p, --print-data-base

Print macro definitions, suffixes, and built-in rules. In a directory without a makefile, use env -i make -p to print out the default variable definitions and built-in rules.

-q, --question

Query; return 0 if the target is up to date; nonzero otherwise.

-r, --no-builtin-rules

Do not use the default rules. This also clears out the default list of suffixes and suffix rules.

-s, --quiet, --silent

Do not display command lines (same as .SILENT).

-S, --no-keep-going, --stop

Cancel the effect of a previous -k. This is only needed for recursive make invocations, where the -k option might be inherited via the MAKEFLAGS environment variable.

-t, --touch

Touch the target files, causing them to be updated.

-v, --version

Print version, copyright, and author information, and exit.

-w, --print-directory

Print the working directory, before and after executing the makefile. Useful for recursive make invocations. This is usually done by default, so it's rare to explicitly need this option.

--warn-undefined-variables

Print a warning message whenever an undefined variable is used. This is useful for debugging complicated makefiles .

-Wfile, --assume-new=file, --new-file=file, --what-if=file

Treat file as if it had just been modified. Together with -n, this lets you see what make would do if file were modified, without actually doing anything. Without -n, make pretends that the file is freshly updated, and acts accordingly.

Makefile Lines

Instructions in the makefile are interpreted as single lines. If an instruction must span more than one input line, use a backslash (\) at the end of the line so that the next line is considered a continuation. The makefile may contain any of the following types of lines:

Blank lines

Blank lines are ignored.

Comment lines

A number sign (#) can be used at the beginning of a line or anywhere in the middle. make ignores everything after the #.

Dependency lines

One or more target names, a single- or double-colon separator, and zero or more prerequisites:

targets : prerequisitestargets ::prerequisites

In the first form, subsequent commands are executed if the prerequisites are newer than the target. The second form is a variant that lets you specify the same targets on more than one dependency line. (This second form is useful when the way you rebuild the target depends upon which prerequisite is newer.) In both forms, if no prerequisites are supplied, subsequent commands are always executed (whenever any of the targets are specified). For example, the following is invalid, since single-colon rules do not allow targets to repeated:

    # PROBLEM: Single colon rules disallow repeating targets
    whizprog.o: foo.h
            $(CC) -c $(CFLAGS) whizprog.o
            @echo built for foo.h

    whizprog.o: bar.h
            $(CC) -c $(CFLAGS) whizprog.o
            @echo built for bar.h

In such a case, the last set of rules is used and make issues a diagnostic. However, double-colon rules treat the dependencies separately, running each set of rules if the target is out of date with respect to the individual dependencies:

    # OK: Double colon rules work independently of each other
    whizprog.o:: foo.h
            $(CC) -c $(CFLAGS) whizprog.o
            @echo built for foo.h

    whizprog.o:: bar.h
            $(CC) -c $(CFLAGS) whizprog.o
            @echo built for bar.h

No tab should precede any targets. (At the end of a dependency line, you can specify a command, preceded by a semicolon; however, commands are typically entered on their own lines, preceded by a tab.)

Targets of the form library ( member ) represent members of archive libraries, e.g., libguide.a(dontpanic.o). Furthermore, both targets and prerequisites may contain shell-style wildcards (e.g., *.c). make expands the wildcard and uses the resulting list for the targets or prerequisites.

Suffix rules

These specify that files ending with the first suffix can be prerequisites for files ending with the second suffix (assuming the root filenames are the same). Either of these formats can be used:

    .suffix.suffix:
    .suffix:

The second form means that the root filename depends on the filename with the corresponding suffix.

Pattern rules

Rules that use the % character define a pattern for matching targets and prerequisites. This is a powerful generalization of the original make's suffix rules. Many of GNU make's built-in rules are pattern rules. For example, this built-in rule is used to compile C programs into relocatable object files:

    %.o : %.c
            $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@

Each target listed in a pattern rule must contain only one % character. To match these rules, files must have at least one character in their names to match the %; a file named just .o would not match the above rule. The text that matches the % is called the stem, and the stem's value is substituted for the % in the prerequisite. (Thus, for example, prog.c becomes the prerequisite for prog.o.)

Conditional statements

Statements that evaluate conditions, and depending upon the result, include or exclude other statements from the contents of the makefile. More detail is given in the section "Conditional Input," later in this chapter.

Macro definitions

Macro definitions define variables: identifiers associated with blocks of text. Variable values can be created with either =, :=, or define, and appended to with +=. More detail is provided in the later section "Creating and Using Macros."

include statements

Similar to the C #include directive, there are three forms:

    include file [file ...]
    -include file [file ...]
    sinclude file [file ...]

make processes the value of file for macro expansions before attempting to open the file. Furthermore, each file may be a shell-style wildcard pattern, in which case make expands it to produce a list of files to read.

The second and third forms have the same meaning. They indicate that make should try to include the named lines, but should continue without an error if a file could not be included. The sinclude version provides compatibility with other versions of make.

vpath statements

Similar to the VPATH variable, the vpath line has one of the following three forms:

    vpath pattern directory ...
                        Set directory list for pattern
    vpath pattern
                        Clear list for pattern
    vpathClear all lists

Each pattern is similar to those for pattern rules, using % as a wildcard character. When attempting to find a prerequisite, make looks for a vpath rule that matches the prerequisite, and then searches in the directory list (separated by spaces or colons) for a matching file. Directories provided with vpath directives are searched before those provided by the VPATH variable.

Command lines

These lines are where you give the commands to actually rebuild those files that are out of date. Commands are grouped below the dependency line and are typed on lines that begin with a tab. If a command is preceded by a hyphen (-), make ignores any error returned. If a command is preceded by an at sign (@), the command line won't echo on the display (unless make is called with -n). Lines beginning with a plus (+) are always executed, even if -n, -q, or -t are used. This also applies to lines containing $(MAKE) or ${MAKE}. Further advice on command lines is given later in this chapter.

Special Dependencies

GNU make has two special features for working with dependencies.

Library dependencies

A dependency of the form -l NAME causes make to search for a library file whose name is either lib NAME .so or lib NAME.a in the standard library directories. This is customizable with the .LIBPATTERNS variable; see the later section "Macros with Special Handling" for more information.

Order-only prerequisites

When a normal prerequisite of a target is out of date, two things happen. First, the prerequisite (and its prerequisites, recursively) are rebuilt as needed. This imposes an ordering on the building of targets and prerequisites. Second, after the prerequisites are updated, the target itself is rebuilt using the accompanying commands. Normally, both of these are what's desired.

Sometimes, you just wish to impose an ordering, such that the prerequisites are themselves updated, but the target is not rebuilt by running its rules. Such order-only prerequisites are specified in a dependency line by placing them to the right of a vertical bar or pipe symbol, |:

    target: normal-dep1 normal-dep2 | order-dep1 order-dep2
            command

Dependency lines need not contain both. I.e., you do not have to provide regular dependencies if there are order-only dependencies as well; just place the | right after the colon.

Here is an annotated example of an order-only dependency:

    $ cat Makefile
    all: target                       First target is default, point to real target

    prereq0:                          How to make prereq0
            @echo making prereq0
            touch prereq0

    prereq1:                          How to make prereq1
            @echo making prereq1
            touch prereq1

    prereq2: prereq0                  prereq2 depends on prereq0
            @echo making prereq2
            touch prereq2

    target: prereq1 | prereq2         How to make target
            @echo making target
            touch target

The order of creation is shown in Figure 16-1.

Figure 16-1. The order of creation

And here is the result of running make:

    $ make
    making prereq1
    touch prereq1
    making prereq0
    touch prereq0
    making prereq2
    touch prereq2
    making target
    touch target

This is normal and as expected. Now, let's update one of the order-only prerequisites and rerun make:

    $ touch prereq0
    $ make
    making prereq2
    touch prereq2

Note that target was not rebuilt! Had the dependency on prereq2 been a regular dependency, then target itself would also have been remade.

Conditional Input

Conditional statements allow you to include or exclude specific lines based on some condition. The condition can be that a macro is or is not defined, or that the value of a macro is or is not equal to a particular string. The equivalence/nonequivalence tests provide three different ways of quoting the values. Conditionals may have an optional "else" part; i.e., lines that are used when the condition is not true. The general form is as follows:

    ifXXX test
                  lines to include if true
    [ else
        lines to include if false ]
    endif

(The square brackets indicate optional parts of the construct; they are not to be entered literally.) Actual tests are as follows:

Condition

Meaning

ifdef macroname

True if macroname is a macro that has been given a value.

ifndef macroname

True if macroname is a macro that has not been given a value.

ifeq ( v1 , v2 )

ifeq ' v1 ' ' v2 '

True if values v1 and v2 are equal.

ifeq " v1 " " v2 "

ifneq ( v1 , v2 )

ifneq ' v1 ' ' v2 '

True if values v1 and v2 are not equal.

ifneq " v1 " " v2 "

For example:

    whizprog.o: whizprog.c
    ifeq($(ARCH),ENIAC)      # Serious retrocomputing in progess!
            $(CC) $(CFLAGS) $(ENIACFLAGS) -c $< -o $@
    else
            $(CC) $(CFLAGS) -c $< -o $@
    endif

Macros

This section summarizes creating and using macros , internal macros, macro modifiers, macros with special handling, and text manipulation with macros and functions.

Creating and Using Macros

Macros (often called variables) are like variables in a programming language. In make, they are most similar to variables in the shell language, having string values that can be assigned, referenced, and compared.

Defining macros

GNU make provides multiple ways to define macros. The different mechanisms affect how make treats the value being assigned. This in turn affects how the value is treated when the macro's value is retrieved, or referenced. GNU make defines two types of variables, called recursively expanded variables and simply expanded variables, respectively. The various macro assignment forms are as follows:

name = value

Create a recursively expanded variable. The value of name is the verbatim text on the right side of the =. If this value contains any references to other variable values, those values are retrieved and expanded when the original variable is referenced. For example:

    bar = v1
    foo = $(bar)            Value of bar retrieved when foo's value is referenced
    ...
    x = $(foo)              x is assigned 'v1'
    bar = v2
    y = $(foo)y is assigned 'v2'

name := value

Create a simply expanded variable. The value is expanded completely, immediately at the time of the assignment. Any variable references in value are expanded then and there. For example:

    bar = v1
    foo := $(bar)           foo is assigned 'v1'
    x = $(foo)              x is assigned 'v1'
    bar = v2
    y = $(foo)y is still assigned 'v1'

A significant advantage of simply expanded variables is that they work like variables in most programming languages, allowing you to use their values in assignments to themselves:

    x := $(x) other stuff

name += value

Append value to the contents of variable name. If name was never defined, += acts like =, creating a recursively defined variable. Otherwise, the result of += depends upon the type of name. If name was defined with =, then value is appended literally to the contents of name. However, if name was defined with :=, then make completely expands value before appending it to the contents of name.

name ?= value

Create recursively expanded variable name with value value only if name is not defined. Note that a variable that has been given an empty value is still considered to be defined.

define name

...

endef

Define a recursively expanded variable, similar to =. However, using define, you can give a macro a value that contains one or more newlines. This is not possible with the other assignment forms (=, :=, +=, ?=).

Macro values

Macro values are retrieved by prefixing the macro name with a $. A plain $ is enough for macros whose names are a single character, such as $< and $@. However, macro names of two or more characters must be enclosed in parentheses and preceded by a $. For example, $(CC), $(CPP), and so on.

Although it was not documented, the original V7 Unix version of make allowed the use of curly braces instead of parentheses: ${CC}, ${RM}, and so on.[*] All Unix versions and GNU make support this as well, and it is included in POSIX. This usage was particularly common in makefiles in the BSD distributions. There is no real reason to prefer one over the other, although long-time Unix programmers may prefer the parentheses form, since that is what was originally documented.

Exporting macros

By default, make exports variables to subprocesses only if those variables were already in the environment or if they were defined on the command line. Furthermore, only variables whose names contain just letters, digits, and underscores are exported, as many shells cannot handle environment variables with punctuation characters in their names. You can use the export directive to control exporting of specific variables, or all variables. The unexport directive indicates that a particular variable should not be exported; it cancels the effect of a previous export command. The command forms are as follows:

export

By itself, the export directive causes make to export all alphanumerically named variables to the environment (where underscore counts as a letter too).

export var

Export variable var to the environment. The variable will be exported even if its name contains nonalphanumeric characters.

export var = value

export var := value

export var += value

export var ? value

Perform the kind of assignment indicated by the given operator (as described earlier), and then export the variable to the environment.

unexport var

Do not export variable var to the environment. Cancels a previous export of var (for example, from a separate, included makefile).

Overriding command-line macros

Normally, when a macro is defined on the command line, the given value is used, and any value assigned to the macro within the makefile is ignored. Occasionally, you may wish to force a variable to have a certain value, or to append a value to a variable, no matter what value was given on the command line. This is the job of the override directive.

override var = value

override var := value

override var += value

override var ? value

override define name

...

endef

Perform the kind of assignment indicated by the given operator (as described earlier), and then export the variable to the environment.

The example given in the GNU make documentation, GNU Make: A Program for Directing Recompilation, is forcing CFLAGS to always contain the -g option:

    override CFLAGS += -g

Internal Macros

$?

The list of prerequisites that have been changed more recently than the current target. Can be used only in normal makefile entries—not suffix rules.

$@

The name of the current target, except in makefile entries for making libraries, where it becomes the library name. (For libguide.a(dontpanic.o), $@ is libguide.a). Can be used both in normal makefile entries and in suffix rules.

$$@

The name of the current target. Can be used only to the right of the colon in dependency lines. This is provided only for compatibility with System V make; its use is not recommended.

$<

The name of the current prerequisite that has been modified more recently than the current target.

$*

The name—without the suffix—of the current prerequisite that has been modified more recently than the current target. Should be used only in implicit rules or static pattern rules.

$%

The name of the corresponding .o file when the current target is a library module. (For libguide.a(dontpanic.o), $% is dontpanic.o). Can be used both in normal makefile entries and in suffix rules.

$^

The list of prerequisites for the current target. For archive members, only the member name is listed. Even if a prerequisite appears multiple times in a dependency list for a target, it only appears once in the value of $^.

$+

Like $^, but prerequisites that appear multiple times in a dependency list for a target are repeated. This is most useful for libraries, since multiple dependencies upon a library can make sense and be useful.

$$

A literal $ for use in rule command lines: for example, when referencing shell variables in the environment or within a loop.

$|

The order-only prerequisites for the current target.

Macro Modifiers

Macro modifiers may be applied to the built-in internal macros listed earlier, except for $$.

D

The directory portion of any internal macro name. Valid uses are:

    $(%D)     $(@D)
    $(*D)     $$(@D)
    $(<D)     $(^D)
    $(?D)     @(+D)

F

The file portion of any internal macro name. Valid uses are:

    $(%F)     $(@F)
    $(*F)     $$(@F)
    $(<F)     $(^F)
    $(?F)     @(+F)

Macros with Special Handling

CURDIR

The current working directory. Set by make but not used by it, for use in makefiles.

.LIBPATTERNS

Used for finding link library names as prerequisites of the form -l name. For each such prerequisite, make searches in the current directory, directories matching any vpath directives, directories named by the VPATH variable, /lib, /usr/lib, and prefix /lib, where prefix is the installation directory for GNU make (normally /usr/local).

The default value of .LIBPATTERNS is lib%.so lib%.a. Thus make first searches for a shared library file, and then for a regular archive library.

MAKE

The full pathname used to invoke make. It is special because command lines containing the string $(MAKE) or ${MAKE} are always executed, even when any of the -n, -q, or -t options are used.

MAKECMDGOALS

The targets given to make on the command line.

MAKEFILE_LIST

A list of makefiles read so far. The rightmost entry in the list is the name of the makefile currently being read.

MAKEFILES

Environment variable: make reads the whitespace-separated list of files named in it before reading any other makefiles.

MAKEFLAGS

Contains the flags inherited in the environment variable MAKEFLAGS, plus any command-line options. Used to pass the flags to subsequent invocations of make, usually via command lines in a makefile entry that contain $(MAKE).

MAKELEVEL

The depth of recursion (sub-make invocation). Primarily for use in conditional statements so that a makefile can act in one way as the top-level makefile and in another way if invoked by another make.

OVERRIDES

A list of the command-line variable definitions. MAKEFLAGS refers to this variable. By setting it to the empty string:

    MAKEOVERRIDES =

You can pass down the command-line options to sub-makes but avoid passing down the variable assignments.

MAKESHELL

For MS-DOS only, the shell make should use for running commands.

MFLAGS

Similar to MAKEFLAGS, this variable is set for compatibility with other versions of make. It contains the same options as in MAKEFLAGS, but not the variable settings. It was designed for explicit use on command lines that invoke make. For example:

    mylib:
            cd mylib && $(MAKE) $(MFLAGS)

The use of MAKEFLAGS is preferred.

SHELL

Sets the shell that interprets commands. If this macro isn't defined, the default is /bin/sh. On MS-DOS, if SHELL not set, the value of COMSPEC is used; see also the MAKESHELL variable, earlier in this list.

SUFFIXES

The default list of suffixes, before make reads and processes makefiles.

.VARIABLES

A list of all variables defined in all makefiles read up to the point that this variable is referenced.

VPATH

Specifies a list of directories to search for prerequisites when not found in the current directory. Directories in the list should be separated with spaces or colons.

Text Manipulation with Macros and Functions

Standard versions of make provide a limited text manipulation facility:

$( macro : s1 = s2 )

Evaluates to the current definition of $( macro ), after substituting the string s2 for every occurrence of s1 that occurs either immediately before a blank or tab, or at the end of the macro definition.

GNU make supports this for compatibility with Unix make and the POSIX standard. However, GNU make goes far beyond simple text substitution, providing a host of functions for text manipulation. The following list provides a brief description of each function.

$(addprefixprefix,names ...)

Generates a new list, created by prepending prefix to each of the names.

$(addsuffixsuffix,names ...)

Generates a new list, created by appending suffix to each of the names.

$(basenamenames ...)

Returns a list of the basename of each of the names. The basename is the text up to but not including the final period.

$(callvar,param, ...)

The call function allows you to treat the value of a variable as a procedure. var is the name of a variable, not a variable reference. The params are assigned to temporary variables that may be referenced as $(1), $(2), and so on. $(0) will be the name of the variable. The value of var should reference the temporary values. The result of call is the result of evaluating var in this way. If var names a built-in function, that function is always called, even if a make variable of the same name exists. Finally, call may be used recursively; each invocation gets its own $(1), $(2), and so on.

$(dirnames ...)

Returns a list of the directory part of each of the names. The directory part is all text, up to and including the final / character. If there is no /, the two characters ./ are used.

$(errortext ...)

Causes make to produce a fatal error message consisting of text.

$(filterpattern ...,text)

Chooses the words in text that match any pattern. Patterns are written using %, as for the patsubst function.

$(filter-outpattern ...,text)

Like filter, but selects the words that do not match the patterns.

$(findstring find , text )

Searches text for an instance of find. If found, the result is find; otherwise, it's the empty string.

$(firstwordnames ...)

Returns the first word in names.

$(foreach var , words , text )

This function is similar to the for loop in the shell. It expands var and words, first. The result of expanding var names a macro. make then loops, setting var to each word in words, and then evaluating text. The result is the concatenation of all the iterations. The text should contain a reference to the variable for this to work correctly.

If var is defined before the foreach is evaluated, it maintains the same value it had after the evaluation. If it was undefined before the foreach, it remains undefined afterwords. In effect, foreach creates a temporary, private variable named var.

$(if condition , then-text [, else-text ])

The condition is evaluated. If, after removing leading and trailing whitespace, the result is not empty, the condition is considered to be true, and the result of if is the expansion of the then-text. Otherwise, the condition is considered to be false, and the result is the expansion of else-text, if any. If there's no else-text, then a false condition produces the empty string. Only one or the other of then-text and else-text is evaluated.

$(join list1 , list2 )

Produces a new list where the first element is the concatenation of the first elements in list1 and list2, the second element is the concatenation of the second elements in list1 and list2, and so on.

$(notdirnames ...)

Returns a list of the nondirectory part of each of the names. The nondirectory part is all the text after the final /, if any. If not, it's the entire name.

$(origin variable )

Returns a string describing the origin of variable. Here, variable is a variable name (foo), not a variable reference ($(foo)). Possible return values are one of the following:

automatic

The variable is an automatic variable for use in the commands of rules, such as $* and $@.

command line

The variable was defined on the command line.

default

The variable is one of those defined by make's built-in rules, such as CC.

environment

The variable was defined in the environment, and -e was not used.

environment override

The variable was defined in the environment, and -e was used.

file

The variable was defined in a makefile.

override

The variable was defined with an override command. See the earlier section "Overriding command-line macros."

undefined

The variable was never given a value.

$(patsubst pattern , replacement , text )

Replaces words in text that match pattern with replacement. The pattern should use a % as a wildcard character. In replacement, a % acts as the placeholder for the text that matched the % in pattern. This is a general form of string substitution. For example, the traditional OBJS = $(SRCS:.c=.o) could instead be written OBJS = $(patsubst %.c, %.o, $(SRCS)).

$(shell command )

Runs the shell command command and returns the output. make converts newlines in the output into spaces and removes trailing newlines. This is similar to '...' in the shell.

$(sort list )

Returns a sorted copy of the words in list, with duplicates removed. Each word is separated from the next by a single space.

$(subst from , to , text )

Replaces every instance of from in text with to.

$(suffixnames ...)

Returns a list of the suffixes of each name. The suffix is the final period and any following text. Returns an empty string for a name without a period.

$(strip string )

Removes leading and trailing whitespace from string and converts internal runs of whitespace into single spaces. This is especially useful in conjunction with conditionals.

$(warningtext ...)

Causes make to produce a warning message consisting of text.

$(wildcardpattern ...)

Creates a space-separated list of filenames that match the shell pattern pattern. (Note! Not a make-style % pattern.)

$(word n , text )

Returns the nth word of text, counting from one.

$(wordlist start , end , text )

Creates a new list consisting of the words start to end in text. Counting starts at one.

$(words text )

Returns the number of words in text.

[*] See the function subst() in http://minnie.tuhs.org/UnixTree/V7/usr/src/cmd/make/misc.c.html.

Special Target Names

.DEFAULT:

Commands associated with this target are executed if make can't find any makefile entries or suffix rules with which to build a requested target.

.DELETE_ON_ERROR:

If this target appears in a makefile, then for any target that make is rebuilding, if its command(s) exit with a nonzero status, make deletes the target.

.EXPORT_ALL_VARIABLES:

The mere existence of this target causes make to export all variables to child processes.

.IGNORE:

With prerequisites, ignore problems just for those files. For historical compatibility, with no prerequisites, ignore error returns from all commands. This is the same as the -i option.

.INTERMEDIATE:

Prerequisites for this target are treated as intermediate files, even if they are mentioned explicitly in other rules. (An intermediate file is one that needs to be built "along the way" to the real target. For example, making a .c file from a .y file, in order to create a .o object file. The .c file is an intermediate file.) This prevents them from being re-created, unless one of their prerequisites is out of date.

.LOW_RESOLUTION_TIME:

make notes that prerequisites for this target are updated by commands that only create low resolution timestamps (one second granularity). For such targets, if their modification time starts at the same second as the modification time of a prerequisite, make does not try to compare the sub-second time values, and does not treat the file as being out of date.

.NOTPARALLEL:

Prerequisites for this target are ignored. Its existence in a makefile overrides any -j option, forcing all commands to run serially. Recursive make invocations may still run jobs in parallel, unless their makefiles also contain this target.

.POSIX:

When this target exists, changing the MAKEOVERRIDES variable does not affect the MAKEFLAGS variable. (This is a rather specialized case.) This target also disables the special treatment of $$@, $$(@D), and $$(@F).

.PHONY:

Prerequisites for this target are marked as "phony." I.e., make always executes their rules, even if a file by the same name exists.

.PRECIOUS:

Files you specify for this target are not removed when you send a signal (such as interrupt) that aborts make, or when a command line in your makefile returns an error.

.SECONDARY:

Prerequisites of this target are treated like intermediate files, except that they are never automatically removed. With no prerequisites, all targets are treated as secondary.

.SILENT:

When given prerequisites, make will not print the commands for those prerequisites when they are rebuilt. Otherwise, for historical compatibility, when this target has no prerequisites, make executes all commands silently, which is the same as the -s option.

.SUFFIXES:

Suffixes associated with this target are meaningful in suffix rules. If no suffixes are listed, the existing suffix rules are effectively "turned off."

Writing Command Lines

Writing good, portable makefile files is a bit of an art. Skill comes with practice and experience. Here are some tips to get you started:

Depending upon your locale, naming your file Makefile instead of makefile can cause it to be listed first with ls. This makes it easier to find in a directory with many files.

Remember that command lines must start with a leading tab character. You cannot just indent the line with spaces, even eight spaces. If you use spaces, make exits with an unhelpful message about a "missing separator."

Remember that $ is special to make. To get a literal $ into your command lines, use $$. This is particularly important if you want to access an environment variable that isn't a make macro. Also, if you wish to use the shell's $$ for the current process ID, you have to type it as $$$$.

Write multiline shell statements, such as shell conditionals and loops, with trailing semicolons and a trailing backslash:

    if [ -f specfile ] ; then \
    ... ; \
    else \
    ... ; \
    fi

Note that the shell keywords then and else don't need the semicolon. (What happens is that make passes the backslashes and the newlines to the shell. The escaped newlines are not syntactically important, so the semicolons are needed to separate the different parts of the command. This can be confusing. If you use a semicolon where you would normally put a newline in a shell script, things should work correctly.)

Remember that each line is run in a separate shell. This means that commands that change the shell's environment (such as cd) are ineffective across multiple lines. The correct way to write such commands is to keep the commands on the same line, separated with a semicolon. In the particular case of cd, separate the commands with && in case the subdirectory doesn't exist or can't be changed to:

    cd subdir && $(MAKE)
    ...
    PATH=special-path-value ; export PATH ; $(MAKE)

For guaranteed portability, always set SHELL to /bin/sh. Some versions of make use whatever value is in the environment for SHELL, unless it is explicitly set in the makefile.

Use macros for standard commands. make already helps out with this, providing macros such as $(CC), $(YACC), and so on.

When removing files, start your command line with -$(RM) instead of $(RM). (The - causes make to ignore the exit status of the command.) This way, if the file you were trying to remove doesn't exist, and rm exits with an error, make can keep going.

When running subsidiary invocations of make, typically in subdirectories of your main program tree, always use $(MAKE), and not make. Lines that contain $(MAKE) are always executed, even if -n has been provided, allowing you to test out a whole hierarchy of makefiles. This does not happen for lines that invoke make directly.

Often, it is convenient to organize a large software project into subprojects, with each one having a subdirectory. The top-level makefile then just invokes make in each subdirectory. Here's the way to do it:

    SUBDIRS = proj1 proj2 proj3
    ...
    projects: $(SUBDIRS)
            for i in $(SUBDIRS); \
            do \
                    echo ====== Making in $$i ; \
                    ( cd $$i && $(MAKE) $(MAKEFLAGS) $@ ) ; \
            done

Chapter 17. The GDB Debugger

The GNU Debugger, GDB, is the standard debugger on GNU/Linux and BSD systems, and can be used on just about any Unix system with a C compiler and at least one of several well-known object file formats. It can be used on other kinds of systems as well. It has a very rich feature set, making it the preferred debugger of many developers the world over.

This chapter covers the following topics:

Conceptual overview

Command-line syntax

Initialization files

GDB expressions

The GDB text user interface

Group listing of GDB commands

Summary of set and show commands

Summary of info command

Alphabetical summary of GDB commands

For more information, see Debugging with GDB: The GNU Source-Level Debugger, listed in the Bibliography.

Conceptual Overview

A debugger is a program that lets you run a second program, which we will call the debuggee. The debugger lets you examine and change the state of the debuggee, and control its execution. In particular, you can single-step the program, executing one statement or instruction at a time, in order to watch the program's behavior.

Debuggers come in two flavors: instruction-level debuggers , which work at the level of machine instructions, and source-level debuggers , which operate in terms of your program's source code and programming language. The latter are considerably easier to use, and usually can do machine-level debugging if necessary. GDB is a source level debugger; it is probably the most widely applicable debugger (portable to the largest number of architectures) of any current debugger.

GDB itself provides two user interfaces : the traditional command-line interface (CLI) and a text user interface (TUI). The latter is meant for regular terminals or terminal emulators, dividing the screen into separate "windows" for the display of source code, register values, and so on.

GDB provides support for debugging programs written in C, C++, Objective C, Java,[*] and Fortran. It provides partial support for Modula-2 programs compiled with the GNU Modula-2 compiler and for Ada programs compiled with the GNU Ada Translator, GNAT. GDB provides some minimal support for debugging Pascal programs. The Chill language is no longer supported.

When working with C++ and Objective C, GDB provides name demangling . C++ and Objective C encode overloaded procedure names into a unique "mangled" name that represents the procedure's return type, argument types, and class membership. This ensures so-called type-safe linkage . There are different methods for name mangling, thus GDB allows you to select among a set of supported methods, besides just automatically demangling names in displays.

If your program is compiled with GCC (the GNU Compiler Collection), using the -g3 and -gdwarf-2 options, GDB understands references to C preprocessor macros . This is particularly helpful for code using macros to simplify complicated struct and union members. GDB itself also has partial support for expanding preprocessor macros, with more support planned.

GDB allows you to specify several different kinds of files when doing debugging:

The exec file is the executable program to be debugged—i.e., your program.

The optional core file is a memory dump generated by the program when it dies; this is used, together with the exec file, for post-mortem debugging. Core files are usually named core on commercial Unix systems. On BSD systems, they are named program .core. On GNU/Linux systems, they are named core. PID, where PID represents the process ID number. This lets you keep multiple core dumps, if necessary.

The symbol file is a separate file from which GDB can read symbol information: information describing variable names, types, sizes, and locations in the executable file. GDB, not the compiler, creates these files if necessary. Symbol files are rather esoteric; they're not necessary for run-of-the-mill debugging.

There are different ways to stop your program:

A breakpoint specifies that execution should stop at a particular source code location.

A watchpoint indicates that execution should stop when a particular memory location changes value. The location can be specified either as a regular variable name or via an expression (such as one involving pointers). If hardware assistance for watchpoints is available, GDB uses it, making the cost of using watchpoints small. If it is not available, GDB uses virtual memory techniques, if possible, to implement watchpoints. This also keeps the cost down. Otherwise, GDB implements watchpoints in software by single-stepping the program (executing one instruction at a time).

A catchpoint specifies that execution should stop when a particular event occurs.

The GDB documentation and command set often use the word breakpoint as a generic term to mean all three kinds of program stoppers . In particular, you use the same commands to enable, disable, and remove all three.

GDB applies different statuses to breakpoints (and watchpoints and catchpoints ). They may be enabled, which means that the program stops when the breakpoint is hit (or fires), disabled, which means that GDB keeps track of them but that they don't affect execution, or deleted, which means that GDB forgets about them completely. As a special case, breakpoints can be enabled only once. Such a breakpoint stops execution when it is encountered, then becomes disabled (but not forgotten).

Breakpoints may have conditions associated with them. When execution reaches the breakpoint, GDB checks the condition, stopping the program only if the condition is true.

Breakpoints may also have an ignore count, which is a count of how many times GDB should ignore the breakpoint when it's reached. As long as a breakpoint's ignore count is nonzero, GDB does not bother checking any condition associated with the breakpoint.

Perhaps the most fundamental concept for working with GDB is that of the frame. This is short for stack frame, a term from the compiler field. A stack frame is the collection of information needed for each separate function invocation. It contains the function's parameters and local variables, as well as linkage information indicating where return values should be placed and the location the function should return to. GDB assigns numbers to frames, starting at 0 and going up. Frame 0 is the innermost frame, i.e., the function most recently called.

GDB uses the readline library, as does the Bash shell, to provide command history, command completion, and interactive editing of the command line. Both Emacs and vi style editing commands are available.

Finally, GDB has many features of a programming language. You can define your own variables and apply common programming language operators to them. You can also define your own commands. Additionally, you can define special hook commands, user-defined commands that GDB executes before or after running a built-in command. (See the entry for define in the section "Alphabetical Summary of GDB Commands" for the details.) You can also create while loops and test conditions with if ... else ... end.

GDB is typically used to debug programs on the same machine (host) on which it's running. GDB can also be configured for cross-debugging, i.e., controlling a remote debuggee with a possibly different machine architecture (the target). Remote targets are usually connected to the host via a serial port or a network connection. Such use is rather esoteric and is therefore not covered here. See the GDB documentation for the full details.

Source Code Locations

GDB is the default debugger on GNU/Linux and BSD systems. It is usable on just about any modern Unix system, though, as well as many older ones. (However, if your system is really ancient, you may need to fall back to an older version of GDB.) Besides the command line and text user interfaces built in to GDB, there are other programs that provide GUI debuggers. Two of the more popular ones are ddd (the Data Display Debugger) and Insight . Both of these use GDB to provide the underlying debugging functionality. Source code URLs for these programs are listed in the following table.

Debugger

Location

ddd

ftp://ftp.gnu.org/gnu/ddd/

GDB

ftp://ftp.gnu.org/gnu/gdb/

Insight

http://sources.redhat.com/insight/

[*] GDB can only debug Java programs that have been compiled to native machine code with GJC, the GNU Java compiler (part of GCC, the GNU Compiler Collection).

Command-Line Syntax

GDB is invoked as follows:

    gdb [options] [executable [corefile-or-PID]]
    gdb [options] --args executable [program args ...]

The gdbtui command is equivalent to gdb --tui; it invokes GDB with the Text User Interface. The TUI is described in the later section "The GDB Text User Interface."

GDB has both traditional short options and GNU-style long options. Long options may start with either one or two hyphens. The command-line options are as follows.

--args

Pass on arguments after executable to the program being debugged.

--async, --noasync

Enable/disable the asynchronous version of the command-line interface.

-bbaudrate, --baudbaudrate

Set the serial port baud rate used for remote debugging.

--batch

Process options and then exit.

--cd dir

Change current directory to dir.

-cfile, --corefile

Analyze the core dump file.

-ddir, --directorydir

Search for source files in dir.

-efile, --execfile

Use file as the executable.

-f, --fullname

Output information used by the Emacs-GDB interface.

--help

Print a usage and option summary and then exit.

--interpreter interp

Select a specific interpreter/user interface. The command-line interface is the default, although there are other interfaces for use by frontend programs.

-n, --nx

Do not read the .gdbinit file.

-nw, --nowindows

Force the use of the command-line interface, even if a windows interface is available.

-ppidnum, -cpidnum, --pidpidnum

Attach to running process pidnum.

-q, --quiet, --silent

Do not print the version number on startup.

-r, --readnow

Fully read symbol files on first access.

-sfile, --symbolsfile

Read symbols from file.

--se file

Use file for both the symbol file and the executable file.

--statistics

Print statistics about CPU time and memory usage after each command finishes.

-tdevice, --ttydevice

Use device for input/output by the program being debugged.

--tui

Use the Terminal User Interface (TUI).

-xfile, --commandfile

Execute GDB commands from file.

--version

Print version information and then exit.

-w, --windows

Force the use of a window interface if there is one.

--write

Allow writing into the executable and core files.

Initialization Files

Two files are used to initialize GDB and the readline library, respectively.

The .gdbinit File

At startup, GDB reads its initialization file. This is a file of commands, such as option settings, that you tell GDB to run every time it starts up. The initialization file is named .gdbinit on Unix (BSD, Linux, etc.) systems. Some MS-Windows versions of GDB use gdb.ini instead. Empty lines (they do nothing) are allowed, and comments in initialization files start with a # and continue to the end of the line. GDB executes commands from initialization files and from the command line in the following order:

Commands in $HOME/.gdbinit. This acts as a "global" initialization; settings that should always be used go here.

Command-line options and operands.

Commands in ./.gdbinit. This allows for option settings that apply to a particular program by keeping the file in the same directory as the program's source code.

Command files specified with the -x option.

You may use the -nx option to make GDB skip the execution of the initialization files.

The .inputrc File

Just like the Bash shell (see Chapter 4), GDB uses the readline library to provide command-line history and editing. You may use either vi- or Emacs-style commands for editing your command line. The readline library reads the file ~/.inputrc to initialize its settings and options. The details are beyond the scope of this book; see the Bash and GDB documentation or the online Info system for the full story. Here is a sample .inputrc file:

    set editing-mode vi                Use vi editor commands
    set horizontal-scroll-mode On      Scroll line left/right as cursor moves along it
    control-h: backward-delete-char    Use ^H as backspace character
    set comment-begin #                For Bash, # starts comments
    set expand-tilde On                Expand ~ notation
    "\C-r": redraw-current-lineMake ^R redraw the current input line

GDB Expressions

GDB can be thought of as a specialized programming language. It has variables and operators similar to those of C, and special features for debugging. This section looks at the different kinds of expressions that GDB understands.

The Value History

Every time you print a value with print, GDB saves the value in the value history . You can reference these saved values by their numeric place in the history, preceded with a $. GDB reminds you of this by printing $ n = val. For example:

    $ gdb whizprog
    ...
    (gdb) print stopped_early
    $1 = 0
    (gdb) print whiny_users
    $2 = TRUE
    (gdb)

A plain $ refers to the most recent value in the value history. This can save considerable typing. If you've just looked at a pointer variable, you can use:

    (gdb) print *$

to print the contents of whatever the pointer is pointing to. $$ refers to the next most recent value in the history, and $$ n refers to the value n places from the end. (Thus, $ n counts from the beginning, while $$ n counts from the end.)

You can use show values to see the values in the history. Whenever GDB reloads the executable (rereads the symbol table), it clears the value history. This is because the value history may have contained pointers into the symbol table and such pointers become invalid when the symbol table is reloaded.

Convenience Variables and Machine Registers

GDB lets you create convenience variables . These are variables you can use to store values as you need them. Their names begin with a $ and consist of alphanumeric characters and underscores. They should start with a letter or underscore. (Note that values in the value history have names that are numeric.) You might want to use a convenience variable as an array index:

    (gdb) set $j = 0
    (gdb)print data[$j++]

After these two commands, simply hitting the ENTER key repeats the last command, stepping through the array one element at a time.

GDB predefines several convenience variables. It also enables you to access the machine registers using predefined register names. Register names vary with machine architecture, of course, but there are four predefined registers available on every architecture. The following list summarizes the convenience variables and predefined registers. The last four entries in the list are the registers that are always available.

$

The most recent value in the value history.

$ n

Item n in the value history.

$$

The next to last item in the value history.

$$ n

Item n in the value history, counting from the end.

$_

The address last printed by the x command.

$_ _

The contents of the address last printed by the x command.

$_exitcode

The exit status that the debuggee returned when it exited.

$bpnum

The breakpoint number of the most recently set breakpoint.

$cdir

The compilation directory for the current source file, if one is recorded in the object file.

$cwd

The current working directory.

$fp

The frame pointer register.

$pc

The program counter register.

$ps

The processor status register.

$sp

The stack pointer register.

Special Expressions

GDB understands the syntax (types, operators, operator precedence) of the language being debugged. You can use the same syntax to enter expressions as you do to modify GDB convenience variables (such $i++). GDB also understands several special syntaxes that let you do things that are not in the target language, as follows:

Array constants

You can create an array constant in the debuggee's memory by enclosing a list of element values in braces. For example, { 1, 2, 3, 42, 57 }.

Array operator

The @ array operator prints all the elements of an array up to a given subscript. For example, if your program uses malloc() to allocate memory:

    double *vals = malloc(count * sizeof(double));

you can print a single element using regular subscripting:

    (gdb) print vals[3]

    $1 = 9

However, you can access vals[0] through vals[2] with:

    (gdb) print *vals@3

    $2 = {0, 1, 4}

File resolution

If you use the same variable name in several source files (for example, each one is static), you can specify which one you mean using file :: variable. For example:

    (gdb) print 'main.c'::errcount

    $2 = 0

It is necessary to put main.c in single quotes to avoid ambiguity with the C++ :: operator.

The GDB Text User Interface

GDB , in its default mode, shows its line-oriented heritage. When single stepping, it displays only one line of source code at a time. Graphical debuggers can show you much more, and indeed many programmers prefer a graphical debugger, if only for this reason. However, recent versions of GDB offer a Text User Interface (TUI), which uses the tried-and-true curses library to provide several "windows" on a regular terminal or terminal emulator, such as an xterm. This can be quite effective, especially since it allows you to do everything from the keyboard.

A number of set options and GDB commands are specific to the TUI. These are listed along with the rest of the set options and GDB commands in the later sections "Summary of set and show Commands" and "Alphabetical Summary of GDB Commands."

Unfortunately (as of GDB 6.3), the TUI is still immature; the author could not get several documented features to work. Thus this book doesn't provide detailed coverage of it. However, it should improve over time, and you should continue to evaluate it to see if it meets your needs.

Group Listing of GDB Commands

This section summarizes the GDB commands by task. Esoteric commands, such as those used by GDB's maintainers, or to cross-debug remote systems connected via serial port or a network, have been omitted.

Aliases for Other Commands

Alias

Short for...

Alias

Short for...

Alias

Short for...

bt

backtrace

f

frame

p

print

c

continue

fo

forward-search

po

print-object

cont

continue

gcore

generate-core-file

r

run

d

delete

h

help

s

step

dir

directory

i

info

share

sharedlibrary

dis

disable

l

list

si

stepi

do

down

n

next

u

until

e

edit

ni

nexti

where

backtrace

Breakpoints

awatch

Set an expression watchpoint.

break

Set a breakpoint at a line or function.

catch

Set a catchpoint to catch an event.

clear

Clear a given breakpoint.

commands

Specify commands to run when a breakpoint is reached.

condition

Supply a condition to a particular breakpoint.

delete

Delete one more breakpoints or auto-display expressions.

disable

Disable one or more breakpoints.

enable

Enable one or more breakpoints.

hbreak

Set a hardware assisted breakpoint.

ignore

Set the ignore-count of a particular breakpoint.

rbreak

Set a breakpoint for all functions matching a regular expression.

rwatch

Set a read watchpoint for an expression.

tbreak

Set a temporary breakpoint.

tcatch

Set a temporary catchpoint.

thbreak

Set a temporary hardware assisted breakpoint.

watch

Set an expression watchpoint.

Examining Data

call

Call a function in the program.

delete display

Cancel one or more expressions that have been set to display when the program stops.

delete mem

Delete a memory region.

disable display

Disable one or more expressions that have been set to display when the program stops.

disable mem

Disable a memory region.

disassemble

Disassemble a section of memory.

display

Print the value of an expression each time the program stops.

enable display

Enable one or more expressions that have been set to display when the program stops.

enable mem

Enable a memory region.

inspect

Same as print.

mem

Define attributes for a memory region.

output

Similar to print, but doesn't save the value in history and doesn't print a newline. For scripting.

print

Print the value of an expression.

print-object

Cause an Objective C object to print information about itself.

printf

Print values like the printf command.

ptype

Print the definition of a given type.

set

Evaluate an expression and save the result in a program variable.

set variable

Same as set, avoids conflict with GDB variables.

undisplay

Cancel one or more expressions that have been set to display when the program stops.

whatis

Print the data type of an expression.

x

Examine memory: x/ fmt address. See the entry for x in the later section "Alphabetical Summary of GDB Commands."

Controlling and Examining Files

add-symbol-file

Add symbols from a dynamically loaded file to GDB's symbol table.

add-symbol-file-from-memory

Load the symbols from a dynamically loaded object file in the debuggee's memory.

cd

Set the current directory for GDB and the debuggee.

core-file

Specify a file to use as the core dump for memory and register contents.

directory

Add a directory to the beginning of the source file search path.

edit

Edit a file or function.

exec-file

Specify a file to use as the executable.

file

Specify the filename of the program to be debugged.

forward-search

Search forward in the current source file for a regular expression, starting at the last line listed.

generate-core-file

Create a core file from the current state of the debuggee.

list

List a function or line.

nosharedlibrary

Unload all shared object library symbols.

path

Add one or more directories to the object file search path.

pwd

Print the current directory.

reverse-search

Search backward in the current source file for a regular expression, starting at the last line listed.

search

Same as forward-search.

section

Change the base address of a particular section in the exec file.

sharedlibrary

Load shared object library symbols for files matching a regular expression.

symbol-file

Load symbol table information from a specified executable file.

Running a Program

advance

Continue the program up to the given location.

attach

Attach to a process or file outside of GDB.

continue

Continue the program being debugged.

detach

Detach a previously attached process or file.

finish

Execute until selected stack frame returns.

handle

Specify how to handle a signal.

interrupt

Interrupt the execution of the debugged program.

jump

Continue program being debugged at specified line or address.

kill

Kill the program being debugged.

next

Execute the program's next statement.

nexti

Execute the program's next instruction.

run

Start the debugged program.

signal

Continue the program, giving it a specified signal.

start

Run the debugged program until the beginning of the main procedure. Useful for C++ where constructors run before main().

step

Step the program until it reaches a different source line. Descends into called functions.

stepi

Step exactly one instruction.

thread

Switch between threads.

thread apply

Apply a command to a list of threads.

thread apply all

Apply a command to all threads.

tty

Set the terminal for future runs of the debuggee.

unset environment

Remove a variable from the debuggee's environment.

until

Execute until the program reaches a source line greater than the current one.

Examining the Stack

backtrace

Print a backtrace of all stack frames.

down

Select and print the stack frame called by the current one.

frame

Select and print a stack frame.

return

Make selected stack frame return to its caller.

select-frame

Select a stack frame without printing anything.

up

Select and print the stack frame that called the current one.

Status Inquiries

info

General command for showing information about the debuggee.

macro

Prefix for commands dealing with C preprocessor macros.

show

General command for showing information about the debugger.

Support Facilities

apropos

Search for commands matching a regular expression.

complete

List the command completions for the rest of the line.

define

Define a new command.

document

Document a user-defined command.

dont-repeat

Don't repeat this command. For use in user-defined commands.

down-silently

Same as the down command, but doesn't print messages.

echo

Print a constant string.

else

Provide a list of alternative commands for use with if.

end

End a list of commands or actions.

help

Print list of commands.

if

Execute nested commands once if the conditional expression is nonzero.

make

Run the make program using the rest of the line as arguments.

quit

Exit GDB.

shell

Execute the rest of the line as a shell command.

source

Read commands from a named file.

up-silently

Same as the up command, but doesn't print messages.

while

Execute nested commands while the conditional expression is nonzero.

Text User Interface Commands

focus

Change which window receives the keyboard focus.

layout

Change the layout of the windows in use.

refresh

Clear and redraw the screen.

tui reg

Change which registers are shown in the register window.

update

Update the source window.

winheight

Change the height of a particular window.

Frequently Used Commands

GDB offers a bewilderingly large number of commands, but most users can get by with just a small handful. Table 17-1 lists the ones that you are likely to use most often.

Table 17-1. The top dozen GDB commands

Command

Purpose

Examples

backtrace

Show call trace

ba

break

Set breakpoint at routine entry or at line number

b main

b parser.c:723

continue

Continue from breakpoint

cont

delete

Remove breakpoint

d 3

finish

Step until end of routine

fin

info breakpoints

List current breakpoints

i br

next

Step to next statement and over routine calls

ne

print

Print expression

print 1.0/3.0

run

(Re)run program, optionally with arguments

ru

ru -u -o foo < data

step

Step to next statement and into routines

s

x

Examine memory

x/s *environ

until

Continue execution until reaching a source line

until

until 2367

Summary of set and show Commands

The set command accepts a large number of different parameters that control GDB's behavior. Many of the accepted parameters are rather esoteric. The show command displays the values of the same parameters as set accepts. This section summarizes the parameters and how they affect GDB.

For most of the options, set option and set option on are equivalent; they enable the option. Use set option off to disable the option.

Name

annotate

Synopsis

set annotate level
show annotate

Set the annotation_level variable to level. GUI programs that call GDB as a subsidiary process use this variable.

Name

architecture

Synopsis

set architecture architecture
show architecture

Set the architecture of target to architecture. Primarily used in cross-debugging.

Name

args

Synopsis

set args
show args

Give the debuggee the argument list when you start it. The run command uses this list when it isn't given any arguments. See the entry for run in the later section "Alphabetical Summary of GDB Commands."

Name

auto-solib-add

Synopsis

set auto-solib-add
show auto-solib-add

Automatically load symbols from shared libraries as needed. When set to off, symbols must be loaded manually with the sharedlibrary command.

Name

auto-solib-limit

Synopsis

set auto-solib-limit megs
show auto-solib-limit

Limit the size of symbols from shared libraries that will be automatically loaded to megs megabytes. Not available on all systems.

Name

backtrace

Synopsis

set backtrace limit count
show backtrace limit
set backtrace past-main
show backtrace past-main

The first syntax limits the number of stack frames shown in a backtrace to count. The default is unlimited. The second syntax controls whether GDB shows information about frames that precede the main() function. Such startup code is usually not of interest, thus the default is off.

Name

breakpoint

Synopsis

set breakpoint
 pending val
show breakpoint pending

How GDB should handle breakpoint locations that can't be found (for example, if a shared library has yet to be loaded). Values are on, off, or auto. When val is on, GDB automatically creates a pending breakpoint. For auto, it asks you. For off, pending breakpoints are not created.

Name

can-use-hw-watchpoints

Synopsis

set can-use-hw-watchpoints value
show can-use-hw-watchpoints

If nonzero, GDB uses hardware support for watchpoints, if the system has such support. Otherwise, it doesn't.

Name

case-sensitive

Synopsis

set case-sensitive
show case-sensitive

Set whether GDB should ignore case when searching for symbols. This variable can be set to on, off, or auto. For auto the case sensitivity depends upon the language.

Name

coerce-float-to-double

Synopsis

set coerce-float-to-double
show coerce-float-to-double

When calling a function that is not prototyped, if this variable is on, GDB coerces values of type float to type double. If the variable is off, floats are not coerced to double and prototyped functions receive float values as is.

Name

commands

Synopsis

show commands [cmdnum]
show commands +

By default, show the last 10 commands in the command history. With a numeric cmdnum, show the 10 commands centered around cmdnum. The second syntax shows the 10 commands following those just printed.

Name

complaints

Synopsis

set complaints limit
show complaints

When GDB encounters problems reading in symbol tables, it normally does not complain. By setting this variable, GDB produces up to limit complaints about each kind of problem it finds. The default is 0, which creates no complaints. Use a large number to mean "unlimited."

Name

confirm

Synopsis

set confirm
show confirm

GDB normally asks for confirmation before certain operations, such as deleting breakpoints. Set this value to off to disable confirmation. Do this only if you're really sure that you know what you're doing.

Name

convenience

Synopsis

show convenience

Print a list of convenience variables used so far, along with their values. Can be abbreviated show conv.

Name

copying

Synopsis

show copying

Display the GNU General Public License (GPL).

Name

cp-abi

Synopsis

set cp-abi
show cp-abi

The Application Binary Interface (ABI) used for inspecting C++ objects. The default is auto, where GDB determines the ABI on its own. Other acceptable values are gnu-v2 for g++ versions before 3.0, gnu-v3 for g++ versions 3.0 and later, and hpaCC for the HP ANSI C++ compiler.

Name

debug-file-directory

Synopsis

set debug-file-directory dir
show debug-file-directory

Look in dir for separate debugging information files. For use on systems where debugging information is not included in executable files.

Name

demangle-style

Synopsis

set demangle-style style
show demangle-style

Choose the scheme used to convert a "mangled" name back into the original Objective C or C++ name. Available values for style are:

a In practice this isn't likely to be an issue; cfront-based C++ compilers are no longer common.

arm

Use the algorithm given in The Annotated C++ Reference Manual (see the Bibliography). The GDB documentation warns that this setting alone does not allow debugging of code produced by cfront.

auto

GDB attempts to figure out the demangling style.

gnu

Use the same scheme as that of the GNU C++ compiler (g++). This is the default.

hp

Use the scheme of HP's ANSI C++ compiler, aCC.

lucid

Use the scheme from Lucid's C++ compiler, lcc.

Name

directories

Synopsis

show directories

Print the current search path of directories that contain source files.

Name

disassembly-flavor

Synopsis

set disassembly-flavor flavor
show disassembly-flavor

The current instruction set for printing machine-level instructions. This command is currently defined only for the Intel x86 architecture. The flavor is either intel or att; the default is att.

Name

editing

Synopsis

set editing
show editing

Enable editing of command lines as they are typed.

Name

environment

Synopsis

set environment variable[=value]
show environment [variable]

Set environment variable variable to optional value or to the empty string. With no variable, show the entire environment. Otherwise, show the value of the given variable.

Name

exec-done-display

Synopsis

set exec-done-display
show exec-done-display

Enable notification of completion for asynchronous execution commands.

Name

extension-language

Synopsis

set extension-language .ext lang
show extension-language

Associate filename extension .ext with programming language lang.

Name

follow-fork-mode

Synopsis

set follow-fork-mode mode
show follow-fork-mode

Choose which process GDB should continue to debug when the debuggee creates a new process. The value of mode is parent if GDB should follow the parent, or child if GDB should follow the child.

Name

gnutarget

Synopsis

set gnutarget format
show gnutarget

The current file format of the debuggee (core file, executable, .o file). The default is auto, and is probably best left that way.

Name

height

Synopsis

set height count
show height

The number of lines GDB thinks are in a page. Use 0 to keep GDB from pausing.

Name

history

Synopsis

set history feature
show historyfeature

Control different aspects of GDB's command history. Values and meanings for feature are as follows:

set history expansion, show history expansion

Use csh-style ! commands for history operations. The default is off.

set history filename file , show history filename

Save the command history to file, and restore it from there upon startup. This overrides the default filename, which is taken from the value of the environment variable GDBHISTFILE if it is set. Otherwise, the default filename is ./.gdb_history.

set history save, show history save

Enable saving/restoring of the command history.

set history size amount , show history size

Limit the number of saved history commands to amount.

Name

input-radix

Synopsis

set input-radix base
show input-radix

The default input radix for entering numbers. Acceptable values for base are 8, 10, and 16. The value must be entered unambiguously (leading 0 for octal, leading 0x or 0X for hexadecimal), or in the current input radix.

Name

language

Synopsis

set language lang
show language

Set the source language to lang. Normally, GDB is able to determine the source language from information in the executable file.

Name

listsize

Synopsis

set listsize count
show listsize

The number of source lines GDB lists with the list command.

Name

logging

Synopsis

set logging
set logging option value
show logging

With the usual on and off values, set logging enables and disables logging of GDB command output . With an option and value, the particular logging option is set to value.

Logging Options

file

The file to which GDB logs command output. The default is gdb.txt.

overwrite

If set, overwrite the log file each time. Otherwise GDB appends to it.

redirect

If set, send output to the log file only. The default outputs to both the terminal and the log file.

Name

max-user-call-depth

Synopsis

set max-user-call-depth limit
show max-user-call-depth

Set the maximum number of recursive calls to a user-defined command to limit. When the limit is exceeded, GDB assumes that the command has gone into infinite recursion and aborts with an error.

Name

opaque-type-resolution

Synopsis

set opaque-type-resolution
show opaque-type-resolution

Resolve opaque struct/class/union types when loading symbols. That is, if one file uses a type opaquely (struct foo *), find the definition for that type in the file that defines it.

Name

osabi

Synopsis

set osabi os-abi-type
show osabi

The Operating System/Application Binary Interface of the debuggee. The default is auto, which means GDB figures it out automatically. Use this if you need to override GDB's guess.

Name

output-radix

Synopsis

set output-radix base
show output-radix

The default output radix for displaying numbers. Acceptable values for base are 8, 10, and 16. The value must be entered unambiguously (leading 0 for octal, leading 0x or 0X for hexadecimal), or in the current input radix.

Name

overload-resolution

Synopsis

set overload-resolution
show overload-resolution

When calling an overloaded function from GDB, search for a function whose signature matches the types of the arguments.

Name

pagination

Synopsis

set pagination
show pagination

Enable/disable pagination of output. Default is on.

Name

paths

Synopsis

show paths

Display the current search path for executable programs (the PATH environment variable). This path is also used to find object files.

Name

print

Synopsis

set print print-opt
show printprint-opt

GDB lets you control the printing of many different aspects of the debuggee. Many of these options are enabled by typing either set print option-name or set print option-name on. Using off instead of on disables the particular printing option. You can use show print option-name to see if the option's printing setting is on or off. The values for print-opt, and descriptions of GDB's behavior when a particular print-opt is on, are presented in the following list.

set print address, show print address

Include the program counter in stack frame information.

set print array, show print array

Prettyprint arrays. This is easier to read but takes up more space. Default is off.

set print asm-demangle, show print asm-demangle

Demangle C++/Objective C names, even in disassembly listings.

set print demangle, show print demangle

Demangle C++/Objective C names in output.

set print elementscount, show print elements

Print no more than count elements from an array. The default is 200; a value of 0 means "unlimited."

set print null-stop, show print null-stop

Stop printing array elements upon encountering one set to zero (ASCII NUL for character arrays, hence the name). Default is off.

set print object, show print object

For a pointer, print the pointed-to object's actual type, which is derived from virtual function table information, instead of the declared type. The default is off, which prints the declared type.

set print pascal_static-members

show print pascal_static-members

Print Pascal static members.

set print pretty, show print pretty

Prettyprint structures, one element per line, with indentation to convey nesting.

set print sevenbit-strings, show print sevenbit-strings

Print 8-bit characters in strings as \ nnn.

set print static-members, show print static-members

Print static members when displaying a C++ object.

set print symbol-filename, show print symbol-filename

When printing the symbolic form of an address, include the source filename and line number.

set print union, show print union

Print unions inside structures.

set print vtbl, show print vtbl

Prettyprint C++ virtual function tables. The default is off.

set print max-symbolic-offset max

show print max-symbolic-offset

When displaying addresses, only use the symbol + offset form if the offset is less than max. The default is 0, which means "unlimited."

Name

prompt

Synopsis

set prompt string
show prompt

Set GDB 's prompt to string, or show the prompt string. The default prompt is (gdb).

Name

radix

Synopsis

set radix base
show radix

Set the input and output radixes to the same number. Acceptable values for base are 8, 10, and 16. The value must be entered unambiguously (leading 0 for octal, leading 0x or 0X for hexadecimal), or in the current input radix. See also input-radix and output-radix.

Name

scheduler-locking

Synopsis

set scheduler-locking
show scheduler-locking

On some operating systems, control the scheduling of other threads (those not being traced) in the debuggee. The value is one of on, off, or step. If set to off, all threads run, with the chance that a different thread could pre-empt the debugger (hit a breakpoint, catch a signal, etc.). When set to on, GDB only allows the current thread to run. When set to step, the scheduler locks only during single-stepping operations.

Name

solib-absolute-prefix

Synopsis

set solib-absolute-prefix path
show solib-absolute-prefix

Use path as the prefix for any absolute paths to shared libraries. This is mainly useful for cross-debugging, to find the target's shared libraries when debugging on a host.

Name

solib-search-path

Synopsis

set solib-search-path path
show solib-search-path

Search the colon separated list of directories in path to find a shared library. GDB searches this path after trying solib-absolute-prefix. This too is mainly useful for cross-debugging.

Name

step-mode

Synopsis

set step-mode
show step-mode

Set the mode of the step command. By default, step does not enter functions that lack debugging information. Setting this variable to on causes GDB to enter such functions, allowing you to examine the machine-level instructions.

Name

stop-on-solib-events

Synopsis

set stop-on-solib-events
show stop-on-solib-events

Stop when a shared library event occurs. The most common such events are the loading and unloading of a shared library.

Name

symbol-reloading

Synopsis

set symbol-reloading
show symbol-reloading

On systems that support automatic relinking (such as VxWorks), reload the symbol table when an object file has changed.

Name

trust-readonly-sections

Synopsis

set trust-readonly-sections
show trust-readonly-sections

Believe that read-only sections will remain read-only. This allows GDB to fetch the contents from the object file, instead of from a possibly remote debuggee. This is useful primarily for remote debugging.

Name

tui

Synopsis

set tui feature value
show tuifeature

Set the TUI feature feature to value.

TUI Features

set tui active-border-mode mode

show tui active-border-mode

Choose/show the curses library attribute for the border of the active window. Available choices are normal, standout, half, half-standout, bold, and bold-standout.

set tui border-kind kind , show tui border-kind

Set/show the characters used to draw the border to one of the following:

acs

Draw borders using the Alternate Character Set (line drawing characters) if the terminal supports it.

ascii

Draw borders using the regular characters +, -, and |.

space

Draw borders using space characters.

set tui border-mode mode , show tui border-mode

Choose/show the curses library attribute for the border of the other, nonactive windows. Available choices are normal, standout, half, half-standout, bold, and bold-standout.

Name

values

Synopsis

show values [valnum]
show values +

With no arguments, print the last 10 values in the value history (see the earlier section "The Value History"). With valnum, print 10 values centered around that value history item number. With +, print 10 more saved values following the one most recently printed.

Name

variable

Synopsis

set variable assignment

Ensure that assignment actually affects a program variable instead of a GDB variable.

Name

verbose

Synopsis

set verbose
show verbose

Enable display of informative messages during long operations. This reassures you that GDB is still alive.

Name

version

Synopsis

show version

Show the current version of GDB.

Name

warranty

Synopsis

show warranty

Display the "no warranty" provisions from the GNU General Public License (GPL).

Name

watchdog

Synopsis

set watchdog seconds
show watchdog

Wait no more than seconds seconds for a remote target to finish a low-level stepping or continuation operation. If the timeout expires, GDB reports an error.

Name

width

Synopsis

set width numchars
show width

Set the number of characters allowed in a line. Use a value of 0 to keep GDB from wrapping long lines.

Name

write

Synopsis

set write
show write

Allow GDB to write into the executable and core files. The default is off.

Summary of the info Command

The info command displays information about the state of the debuggee (as opposed to show, which provides information about internal GDB features, variables and options). With no arguments, it provides a list of possible features about which information is available.

info ...

Information displayed

address sym

Information about where symbol sym is stored. This is either a memory address or a register name.

all-registers

Information about all registers, including floating-point registers.

args

Information about the arguments to the current function (stack frame).

break [bpnum]

Information about breakpoint bpnum if given, or about all breakpoints if not.

breakpoints [bpnum]

Same information as the info break command.

catch

Information on exception handlers active in the current frame.

classes [regexp]

Information about Objective-C classes that match regexp, or about all classes if regexp is not given.

display

Information about items in the automatic display list.

extensions

Information about the correspondence of filename extensions to source code programming languages.

f [address]

Same information as the info frame command.

files

Information about the current debugging target, including the current executable, core, and symbol files.

float

Information about the floating-point flags and registers.

frame [address]

With no argument, print information about the current frame. With an address, print information about the frame containing address, but do not make it the current frame.

functions [regexp]

With no argument, print the names and types of all functions. Otherwise, print information about functions whose names match regexp.

handle

The list of all signals and how GDB currently treats them.

line line-spec

The starting and ending address for the code containing the line specified by line-spec. See list for a description of line-spec. This sets the default address to the starting address for the given line, so that x/i may be used to examine instructions.

locals

Information about local variables (static or automatic) accessible from the current frame.

macro macroname

Show the definition and source location for the macro macroname.

mem

Information about memory regions and their attributes.

proc [item]

Information about the running debuggee. Available on systems that supply /proc. The optional item is one of: mappings for available address ranges and how they may be accessed, times for starting time and user and system CPU time, id for process ID information, status for general status of the process, or all for all of the above.

program

Information about the running debuggee, such as running or stopped, and the process ID.

registers [reg ...]

With no arguments, information about all machine registers except floating-point registers. Otherwise, information about the named registers.

s

Same information as the info stack command (which is the same as the backtrace command).

scope address

Information about variables local to the scope containing address, which can be a function name, source line, or absolute address preceded by *.

selectors [regexp]

Information about Objective-C selectors that match regexp, or about all selectors if regexp is not given.

set

Same as the show command with no arguments.

share

Same as the info sharedlibrary command.

sharedlibrary

Information about currently loaded shared libraries.

signal

Same as the info handle command.

source

Information about the source file, such as compilation directory, programming language, and debugging information.

sources

Information about all source files that have debugging information. The output is split into two lists: those whose information has already been read, and those whose information will be read when needed.

stack

Same information as the backtrace command.

symbol address

The name of the symbol (function, variable, etc.) stored at address address.

target

Identical to the info files command.

terminal

Current terminal modes settings.

threads

All the program's current threads.

types [regexp]

Information about types that match regexp, or about all types in the program if regexp is not given.

variables [regexp]

With no argument, print the names and types of all variables except for local variables. Otherwise, print information about variables whose names match regexp.

watchpoints [wpnum]

Information about watchpoint wpnum, or about all watchpoints if wpnum is not given.

win

The names and sizes of all displayed TUI windows.

Alphabetical Summary of GDB Commands

The following alphabetical summary of GDB commands includes all those that are useful for day-to-day debugging. Esoteric commands, such as those used by GDB's maintainers, or to cross-debug remote systems connected via serial port or a network, have been omitted.

Many of these commands may be abbreviated. The list of abbreviations is provided in the earlier section "Aliases for Other Commands."

Name

add-symbol-file

Synopsis

add-symbol-file file addr [-readnow]
add-symbol-file file [-s section address ...]

Read additional symbol table information from file, which was dynamically loaded into the debuggee outside of GDB's knowledge. You must tell GDB the address at which it was loaded, since GDB cannot determine this on its own. The -readnow option is the same as for the file command; see file for more information. You may use -s to name the memory starting at address with the name section. You can provide multiple section/address pairs with multiple -s options.

Name

advance

Synopsis

advance bp-spec

Continue executing until the program reaches bp-spec, which can have any value acceptable to the break command (see break for the details). This command is like the until command, but it does not skip recursive function calls, and the location doesn't have to be in the current frame.

Name

apropos

Synopsis

apropos regex

Search through the built-in documentation for commands that match the regular expression regex. Multiple words constitute a single regular expression. GDB uses Basic Regular Expressions (see Chapter 7); however, it also ignores case when matching.

Name

attach

Synopsis

attach pid

Attach to the running process pid, and use it to obtain information about in-memory data. You must have appropriate permission in order to attach to a running process.

Name

awatch

Synopsis

awatch expression

Set a watchpoint to stop when expression is either read or written. (Compare rwatch and watch.)

Name

backtrace

Synopsis

backtrace [count]

Print a full list of all stack frames. With a positive count, print only the innermost count stack frames. With a negative count, print only the outermost count stack frames.

Example

Show a backtrace upon hitting a breakpoint:

    ...
    Breakpoint 1, do_print (tree=0x924f9e0) at builtin.c:1573
    1573            struct redirect *rp = NULL;
    (gdb) backtrace
    #0  do_print (tree=0x924f9e0) at builtin.c:1573
    #1  0x08087bef in interpret (tree=0x924f9e0) at eval.c:784
    #2  0x08086b68 in interpret (tree=0x924f980) at eval.c:453
    #3  0x08072804 in main (argc=2, argv=0xbfe41bd4) at main.c:584

Name

break

Synopsis

break [bp-spec]
break bp-specif condition
break bp-spec thread threadnum
break bp-spec thread threadnum ifcondition

Set a breakpoint. The first form sets an unconditional breakpoint; execution of the debuggee stops when the breakpoint is reached. The second form sets a conditional breakpoint: when the breakpoint is reached, GDB evaluates the condition. If the condition is true, execution stops. If it isn't, the program continues. In either case, bp-spec is one of the items given in the following section.

The third and fourth forms are similar to the first and second ones respectively; however, they work on individual threads of control running within the debuggee. They specify that GDB should stop the program only when the given thread threadnum reaches the point specified by bp-spec.

Breakpoint Specifications

The following list shows the different forms that the break command can take.

break

Set a breakpoint at the next instruction in the current stack frame. If you are not in the innermost stack frame, control stops as soon as execution returns to that frame. This is like the finish command, except that finish doesn't leave a breakpoint set. In the innermost frame, GDB stops when the breakpoint is reached. This is most useful inside loop bodies.

break function

Set a breakpoint at the first instruction of function.

break linenumber

Set a breakpoint at line linenumber in the current file.

break file : line

Set a breakpoint at line number line in source file file.

break file : function

Set a breakpoint at function function in source file file.

break + offset break - offset

Set a breakpoint at offset lines forward (+ offset) or backward (- offset) from where execution stopped in the current stack frame.

break * address

Set a breakpoint at address. This is useful for parts of the object file that don't have debugging symbols available (such as inside shared libraries).

A breakpoint set at a line or statement stops when the first instruction in that statement is reached.

Example

Set a breakpoint in the main() function:

    $ gdb whizprog
    GNU gdb 6.3
    ...
    (gdb) break main
    Breakpoint 1 at 0x80483c0: file whizprog.c, line 6.

Name

call

Synopsis

call expression

Call a function within the debuggee. expression is a function name and parameter list. Non-void results are printed and saved in the value history.

Name

catch

Synopsis

catch event

Place a catchpoint. Execution stops when the specified event occurs.

Catchpoint Events

catch

A C++ exception is caught.

exec

The program calls execve(). This is not implemented on all systems.

fork

The program calls fork(). This is not implemented on all systems.

throw

A C++ exception is thrown.

vfork

The program calls vfork(). This is not implemented on all systems.

Name

cd

Synopsis

cd dir

Change GDB 's working directory to dir.

Name

clear

Synopsis

clear [bp-spec]

Clear a breakpoint. The argument is the same as for the break command (see break).

Name

commands

Synopsis

commands [bp]
... commands ...
end

Supply GDB commands that should run when the program stops at a given breakpoint. With no bp, the list of commands is associated with the most recent breakpoint, watchpoint, or catchpoint that was set, not the one that was most recently executed. To clear a list of commands, supply the commands keyword and follow it immediately with end.

Example

break myfunc if x > 42       Break myfunc if x > 42
    commands                     List of commands
    silent                       Don't print GDB commands
    printf "x = %d\n", x         Print variable value
    cont                         Continue execution
    endEnd of command list

Name

complete

Synopsis

complete prefix

Show possible command completions for prefix. This is intended for Emacs when running GDB in an Emacs buffer.

Name

condition

Synopsis

condition bpconditionbp expression

Add or remove a condition to a given breakpoint. The first syntax removes any condition associated with breakpoint number bp. The second form adds expression as a condition for breakpoint number bp, similar to the break ... if command. See also break.

Name

continue

Synopsis

continue [count]

Resume execution after stopping at a breakpoint. If supplied, count is an ignore count; see the entry for ignore.

Example

Set a breakpoint in main(). Once there, set another break point and then continue until the new breakpoint is reached.

    (gdb) break main
    Breakpoint 3 at 0x8071d2e: file main.c, line 209.
    (gdb) run ...
    Starting program: ...

    Breakpoint 3, main (argc=2, argv=0xbff59f04) at main.c:209
    209             const char *optlist = "+F:f:v:W;m:D";
    (gdb) break do_print
    Breakpoint 4 at 0x805b239: file builtin.c, line 1573.
    (gdb) continue
    Continuing.

    Breakpoint 4, do_print (tree=0x91589e0) at builtin.c:1573
    1573            struct redirect *rp = NULL;

Name

core-file

Synopsis

core-file [filename]

With no argument, indicate that there is no separate core file. Otherwise, treat filename as the file to use as a core file; that is, a file containing a dump of memory from an executing program.

Name

define

Synopsis

define commandname... commands ...
end

Create a user-defined command named commandname. The series of commands makes up the definition of commandname. Whenever you type commandname, GDB executes the commands. This is similar to functions or procedures in regular programming languages. See also document.

Hooks

If commandname has the form hook- command, where command is a built-in GDB command, when you enter command GDB runs commandname before it runs command.

Similarly, if commandname has the form hookpost- command, then GDB runs the provided sequence of commands after command finishes. You thus have available both pre- and post-execution hook facilities.

Finally, for the purposes of providing hooks, GDB recognizes a pseudo-command named stop that "executes" every time the debuggee stops. This allows you to define a hook of the form hook-stop in order to execute a sequence of commands every time the program stops.

Name

delete

Synopsis

delete [breakpoints] [range ...]
delete display dnums ...
delete mem mnums ...

For the first syntax, remove the given range of breakpoints, watchpoints, or catchpoints. With no arguments, delete all breakpoints. (GDB may prompt for confirmation depending upon the setting of set confirm.) The second syntax removes items from the automatic display list (created with display); see display for more information. The third syntax removes defined memory regions created with mem; see mem for more information.

Name

detach

Synopsis

detach

Detach the debugger from the running process previously attached to with attach.

Name

directory

Synopsis

directory [dirname ...]

Add dirname to the list of directories that GDB searches when attempting to find source files. The directory is added to the front of the search path. With no argument, clear the directory search path.

Name

disable

Synopsis

disable [breakpoints] [range ...]
disable display dnums ...
disable mem mnums ...

With the first syntax, disable the breakpoints in range, or all breakpoints if these are not supplied. GDB remembers disabled breakpoints, but they do not affect execution of the debuggee. The second syntax disables item(s) dnums in the automatic display list; see display for more information. The third syntax disables item(s) mnums in the list of defined memory regions; see mem for more information.

Name

disassemble

Synopsis

disassemble
disassemble pc-valdisassemblestart end

Print a range of memory addresses as assembly code instructions. With no argument, print the entire current function. One argument is assumed to be a program counter value; the function containing this value is dumped. Two arguments specify a range of addresses to dump, from (and including) start up to (but not including) end.

Name

display

Synopsis

display
display/format expression

Add expression (usually a variable or address) to the list of values that GDB automatically displays every time the debuggee stops. The format is one of the format letters accepted by the x command; see x for the full list. The trailing "/" and format immediately follow the display command. With no arguments, print the current values of the expressions on the display list.

Name

document

Synopsis

document commandname
... text ...end

Provide documentation for the user-defined command commandname. The documentation consists of the lines provided in text. After executing this command, help commandname displays text. See also define.

Name

dont-repeat

Synopsis

dont-repeat

This command is designed for use inside user-defined commands (see define). It indicates that the user-defined command should not be repeated if the user presses ENTER.

Name

down

Synopsis

down count

Move down count stack frames. Positive values for count move towards more recent stack frames. See also frame and up.

Name

down-silently

Synopsis

down-silently count

Same as the down command, but don't print any messages. This is intended mainly for use in GDB scripts.

Name

echo

Synopsis

echo strings ...

Print strings. You may use the standard C escape sequences to generate nonprinting characters. In particular, you should use \n for newline. Note: unlike the shell-level echo command, GDB 's echo does not automatically supply a newline. You must explicitly request one if you want it.

Name

edit

Synopsis

edit [line-spec]

Edit the lines in the source file as specified by line-spec. See list for values for line-spec. With no argument, edit the file containing the most recently listed line. This uses the value of $EDITOR as the editor, or ex if that environment variable is not set.

Name

else

Synopsis

else

Provide an alternate list of commands to execute if the expression in an if is false. Terminate the commands with end. See if.

Name

enable

Synopsis

enable [breakpoints] [range ...]
enable [breakpoints] delete range ...
enable [breakpoints] once range ...
enable display dnums ...
enable mem mnums ...

The first syntax enables breakpoints; either all breakpoints if no range is supplied, or just the given breakpoints. The second syntax enables the specified breakpoints so that they stop the program when they're encountered, but are then deleted. The third syntax enables the specified breakpoints so that they stop the program when encountered, but then become disabled. The fourth syntax enables items in the automatic display list that were previously disabled with disable; for more information see display. The fifth syntax enables items in the list of defined memory regions; for more information, see mem.

Name

end

Synopsis

end

Terminate a list of commands provided with keywords commands, define, document, else, if, or while.

Name

exec-file

Synopsis

exec-file [filename]

With no argument, discard all information about the executable file. Otherwise, treat filename as the file to execute. This command searches $PATH to find the file if necessary.

Name

fg

Synopsis

fg [count]

An alias for continue; see continue.

Name

file

Synopsis

file
file filename [-readnow]

The first syntax causes GDB to discard all its information on both the symbol file and the executable file. The second syntax treats filename as the file to be debugged; it is used both for symbol table information and as the program to run for the run command.

The -readnow option forces GDB to load symbol table information immediately instead of waiting until information is needed.

Name

finish

Synopsis

finish

Continue execution until the current stack frame (function) is about to return. This is most useful when you accidentally step into a function (using step) that does not have debugging information in it (such as a library function).

Name

focus

Synopsis

focus window

Change the focus to TUI window window. Acceptable values for window are next, prev, src, asm, regs, and cmd.

Name

forward-search

Synopsis

forward-search regex

Search forward from the current line for a line that matches the regular expression regex, and print it.

Name

frame

Synopsis

frame
frame frame-numframeaddress

Select or print information about the current stack frame (function invocation). Frame zero is the innermost (most recent) stack frame. With no arguments, print the current stack frame. With a frame-num, move to that frame. This is the most common kind of argument. An address argument may be used to select the frame at the given address. This is necessary if the chaining of stack frames has been damaged by a bug. Some architectures may require more than one address.

Example

Move up the call stack toward an older function:

    (gdb) where
    #0  do_print (tree=0x83579e0) at builtin.c:1573
    #1  0x08087bef in interpret (tree=0x83579e0) at eval.c:784
    #2  0x08086b68 in interpret (tree=0x8357980) at eval.c:453
    #3  0x08072804 in main (argc=2, argv=0xbfeb8584) at main.c:584
    (gdb) frame 2
    #2  0x08086b68 in interpret (tree=0x8357980) at eval.c:453
    453                       (void) interpret(tree->rnode);

Name

generate-core-file

Synopsis

generate-core-file [file]

Generate a core file from the state of the debuggee. With file, send the core dump to file. Otherwise, use a file named core. PID.

Name

handle

Synopsis

handle signal keywords ...

Set GDB up to handle one or more signals. The signal may be a signal number, a signal name (with or without the SIG prefix), a range of the form low-high, or the keyword all. The keywords are one or more of the following:

ignore

Ignore the signal; do not let the program see it.

noignore

Same as the pass command.

nopass

Same as the ignore command.

noprint

Do not print a message when the signal arrives.

nostop

Do not stop the program when the signal arrives; let the debuggee receive it immediately.

pass

Pass the signal on through to the program.

print

Print a message when the signal arrives.

stop

Stop the program when the signal arrives. Normally, only "error" signals such as SIGSEGV stop the program.

Name

hbreak

Synopsis

hbreak bp-spec

Set a hardware-assisted breakpoint. The argument is the same as for the break command (see break, earlier in this list). This command is intended for EEPROM/ROM code debugging; it allows you to set a breakpoint at a location without changing the location. However, not all systems have the necessary hardware for this.

Name

help

Synopsis

help [command]

With no arguments, print a list of subtopics for which help is available. With command, provide help on the given GDB command or group of commands.

Name

if

Synopsis

if expression
... commands1 ...[ else
... commands2 ... ]
end

Conditionally execute a series of commands. If expression is true, execute commands1. If an else is present and the expression is false, execute commands2.

Name

ignore

Synopsis

ignore bp count

Set the ignore count on breakpoint, watchpoint, or catchpoint bp to count. GDB does not check conditions as long as the ignore count is positive.

Name

inspect

Synopsis

inspect print-expressions

An obsolete alias for the print command. See print for more information.

Name

info

Synopsis

info [feature]

Display information about feature, which concerns the state of the debuggee. With no arguments, provide a list of features about which information is available. Full details are provided in the section "Summary of the info Command," earlier in this chapter.

Name

jump

Synopsis

jump location

Continue execution at location, which is either a line-spec as for the list command (see list), or a hexadecimal address preceded by a *.

The continue command resumes execution where it stopped, while jump moves to a different place. If the location is not within the current frame, GDB asks for confirmation since GDB will not change the current setup of the machine registers (stack pointer, frame pointer, etc.).

Name

kill

Synopsis

kill

Kill the process running the debuggee. This is most useful to force the production of a core dump for later debugging.

Name

layout

Synopsis

layout layout

Change the layout of the TUI windows to layout. Acceptable values for layout are:

asm

The assembly window only.

next

The next layout.

prev

The previous layout.

regs

The register window only.

split

The source and assembly windows.

src

The source window only.

The command window is always displayed.

Name

list

Synopsis

list functionlistline-spec

List lines of source code, starting at the beginning of function function (first form), or centered around the line defined by line-spec (second form). Pressing the ENTER key repeats the last command; for list, this shows successive lines of source text. A line-spec can take one of the forms shown below.

Line Specifications

list number

List lines centered around line number.

list + offset

list - offset

List lines centered around the line offset lines after (first form) or before (second form) the last line printed.

list file : line

List lines centered around line line in source file file.

list file : function

List lines centered around the opening brace of function function in source file file. This is necessary if there are multiple functions of the same name in different source files.

list * address

List lines centered around the line containing address, which can be an expression.

list first , last

List the lines from first to last, each of which may be any of the previous forms for a line-spec.

list first ,

List lines starting with first.

list , last

List lines ending with last.

list +

list −

List the lines just after (first form) or just before (second form) the lines just printed.

Name

macro

Synopsis

macro expand expressionmacro expand-once expressionmacro define macro bodymacro define macro(args) bodymacro undefinemacro

Work with C preprocessor macros. As of GDB 6.3, not all of these are implemented.

macro expand expression

Display the result of macro expanding expression. The results are not evaluated, thus they don't need to be syntactically valid. expand may be abbreviated exp.

macro expand-once expression

Expand only those macros whose names appear in expression instead of fully expanding all macros. expand-once may be abbreviated exp1. Not implemented as of GDB 6.3.

macro define macro body

macro define macro(args) body

Define a macro named macro with replacement text body. As in C and C++, the first form defines a symbolic constant, while the second form defines a macro that accepts arguments. Not implemented as of GDB 6.3.

macro undefine macro

Remove the definition of the macro named macro. This works only for macros defined with macro define; you cannot undefine a macro in the debuggee. Not implemented as of GDB 6.3.

Name

make

Synopsis

make [args]

Run the make program, passing it args. Equivalent to the shell make args command. This is useful for rebuilding your program while remaining within GDB.

Name

mem

Synopsis

mem start-addr end-addr attributes ...

Define a memory region, i.e., a portion of the address space starting at start-addr and ending at end-addr that has particular attributes.

Memory Access Attributes

ro

Memory is read-only.

rw

Memory is read-write.

wo

Memory is write-only.

8, 16, 32, 64

GDB should use memory accesses of the specified width in bits. This is often needed for memory-mapped device registers.

Name

next

Synopsis

next [count]

Run the next statement. Unlike step, a function call is treated as a simple statement; single-stepping does not continue inside the called function. With a count, run the next count statements. In any case, execution stops upon reaching a breakpoint or receipt of a signal. See also step.

Name

nexti

Synopsis

nexti [count]

Run the next machine instruction. Otherwise, this is similar to the next command in that single-stepping continues past a called function instead of into it.

Name

nosharedlibrary

Synopsis

nosharedlibrary

Unload all shared libraries from the debuggee.

Name

output

Synopsis

output expressionoutput/format expression

Print expression, completely unadorned. No newlines are added, nor is the value preceded by the usual $ n =. Neither is the value added to the value history. With "/" and format, output the expression using format, which is the same as for the print command; see print.

Name

path

Synopsis

path dir

Add directory dir to the front of the PATH environment variable.

Name

print

Synopsis

print [/format] [expression]

Print the value of expression. If the first argument is "/" and format, use the format to print the expression. Omitting expression prints the previous expression, allowing you to use a different format to see the same value. The allowed format values are a subset of the format items for the x command; see also x, later in this section.

Print Formats

a

Print the value as an address. The address is printed as both an absolute (hexadecimal) address, and as an offset from the nearest symbol.

c

Print the value as a character constant.

d

Print the value as a signed decimal integer.

f

Print the value as a floating point number.

o

Print the value as an octal integer.

t

Print the value as a binary integer (t stands for "two").

u

Print the value as an unsigned decimal integer.

x

Print the value as a hexadecimal integer.

Example

Print a wide character value as a regular character:

    (gdb) print tmp->sub.val.wsp
    $2 = (wchar_t *) 0x99f0910
    (gdb) print/c *$2
    $3 = 97 'a'

Name

print-object

Synopsis

print-object object

Cause the Objective C object object to print information about itself. This command may only work with Objective C libraries that define the hook function _NSPrintForDebugger().

Name

printf

Synopsis

printf format-string,expressions ...

Print expressions under control of the format-string, as for the C library printf(3) function. GDB allows only the simple, single-letter escape sequences (such as \t and \n) to appear in format-string.

Name

ptype

Synopsis

ptype
ptype expressionptypetype-name

Print the full definition of a type. This differs from whatis, in that whatis only prints type names, while ptype gives a full description.

With no argument (the first syntax), print the type of the last value in the value history. This is equivalent to ptype $. With expression (the second syntax), print the type of expression. Note that the expression is not evaluated. No operators with side effects (such as ++, or a function call) execute. The third syntax prints the type of type-name, which is either the name of a type or one of the keywords class, enum, struct, or union, followed by a tag. See also whatis.

Name

pwd

Synopsis

pwd

Print GDB 's current working directory.

Name

quit

Synopsis

quit

Exit GDB.

Name

rbreak

Synopsis

rbreak regexp

Set breakpoints on all functions matching the regular expression regexp. The regular expression syntax used is that of grep (i.e., Basic Regular Expressions, see Chapter 7). This is useful for overloaded functions in C++.

Name

refresh

Synopsis

refresh

Redraw and refresh the screen for the TUI. See the earlier section "The GDB Text User Interface" for more information.

Name

return

Synopsis

return [expression]

Cause the current stack frame to return to its caller. If provided, expression is used at the return value. GDB pops the current stack frame and any below it (functions it called) from the execution stack, causing the returning frame's caller to become the current frame. Execution does not resume; the program remains stopped until you issue a continue command.

Name

reverse-search

Synopsis

reverse-search regex

Search backwards from the current line for a line that matches the regular expression regex, and print it.

Name

run

Synopsis

run [arguments]

Run the debuggee, optionally passing it arguments as the command-line arguments. GDB also supports simple I/O redirections (<, >, >>); pipes are not supported. GDB remembers the last-used arguments; thus a plain run command restarts the program with these same arguments. (Use set args to clear or change the argument list.)

The debuggee receives the arguments you give to the run command, the environment as inherited by GDB and modified by set environment, the current working directory, and the current standard input, standard output, and standard error (unless redirected).

Name

rwatch

Synopsis

rwatch expression

Set a watchpoint to stop when expression is read. (Compare awatch and watch.)

Name

search

Synopsis

search regex

An alias for forward-search. See forward-search for more information.

Name

section

Synopsis

section sectname address

Change the base address of sectname to address. This is a last-ditch command, used when the executable file format doesn't contain data on section addresses or if the data in the file is wrong.

Name

select-frame

Synopsis

select-frame
select-frame frame-numselect-frameaddress

Same as the frame command, except that it does not print any messages. See frame for more information.

Name

set

Synopsis

set [variable]

Change the setting either of GDB variables or variables in the debuggee. See the earlier section "Summary of set and show Commands" for more information.

Name

sharedlibrary

Synopsis

sharedlibrary [regexp]

With no argument, load all the shared libraries required by the program or core file. Otherwise, load only those files whose names match regexp.

Name

shell

Synopsis

shell [command args]

Run the shell command command with arguments args without leaving GDB. With no arguments, start an interactive subshell.

Example

Run grep to find the definition of a macro:

    510             return tmp_number((AWKNUM) len);
    (gdb) shell grep tmp_number *.h
    whizprog.h:#define   tmp_number(x)   mk_number((x), TEMP)
    (gdb)

Name

show

Synopsis

show [variable]

Show the setting of internal GDB variables. See the earlier section "Summary of set and show Commands" for more information.

Name

signal

Synopsis

signal sig

Continue the program running, and immediately send it signal sig. sig may be either a signal number or a signal name. The signal number 0 is special: if the program stops due to receipt of a signal, sending signal 0 resumes it without delivering the original signal.

Name

silent

Synopsis

silent

Don't print breakpoint-reached messages. Use this command inside a commands list; see commands.

Name

source

Synopsis

source file

Read and execute the commands in file. The commands are not printed as they are read, and an error in any one command terminates execution of the file. When executing a command file, commands that normally ask for confirmation do not do so, and many commands that would otherwise print messages are silent.

Name

step

Synopsis

step [count]

Run the next statement. This differs from the next command in that if the next statement is a function call, step steps into it and continues single-stepping in the called function. However, next calls the function without stepping into it. With a count, step through count statements. In any case, execution stops upon reaching a breakpoint or receipt of a signal. See also next.

Name

stepi

Synopsis

stepi [count]

Run the next machine instruction. Otherwise, this is similar to the step command in that single-stepping continues into a called function. With a count, step through count instructions.

Name

symbol-file

Synopsis

symbol-file
symbol-file filename [-readnow]

With no argument, discard all symbol table information. Otherwise, treat filename as the file to get symbol table information from, and as the file to execute. This command searches $PATH to find the file if necessary. The -readnow option has the same meaning as for the file command; see file for more information.

Name

tbreak

Synopsis

tbreak bp-spec

Set a temporary breakpoint. The argument is the same as for the break command (see break, earlier in this list). The difference is that once the breakpoint is reached, it is removed.

Name

tcatch

Synopsis

tcatch event

Set a temporary catchpoint. The argument is the same as for the catch command (see catch, earlier in this list). The difference is that once the catchpoint is reached, it is removed.

Name

thbreak

Synopsis

thbreak bp-spec

Set a temporary hardware-assisted breakpoint. The argument is the same as for the hbreak command (see hbreak, earlier in this list).

Name

thread

Synopsis

thread threadnumthread apply [threadnum | all]command

The first form makes threadnum the current thread, i.e., the one that GDB works with. The second form lets you apply command to either the specific thread threadnum or to all threads.

Name

tty

Synopsis

tty device

Set the debuggee's input and output to device (typically the device file for a terminal).

Name

tui

Synopsis

tui reg regkind

For the TUI, update the register window to display the register set regkind.

Register Sets

The following are the acceptable values for regkind.

float

The floating-point registers.

general

The general purpose registers.

next

The "next" register group. Predefined register groups are all, float, general, restore, save, system, and vector.

system

The system registers.

Name

undisplay

Synopsis

undisplay dnums ...

Remove display items dnums from the automatic display list. See display for more information.

Name

unset

Synopsis

unset environment variable

Remove environment variable variable from the environment passed to the debuggee.

Name

until

Synopsis

until [location]

Continue execution until it reaches the next source line after the current line. This is most useful for reaching the line after the end of a loop body. Without a location, until uses single-stepping to reach the next source line. With a location, it uses an internal breakpoint to reach the next source line; this is much faster. The location may be any form acceptable to the break command; see break for more information.

Example

Use until to skip through the entire execution of a loop:

    $ nl -ba foo.c
                     Show source file
         1  #include <stdio.h>
         2
         3  int main(void)
         4  {
         5      int i;
         6
         7      for (i = 1; i <= 10; i++)
         8              printf("i = %d\n", i);
         9
        10      printf("all done: i = %d\n", i);
        11  }
    $ gcc -g foo.c -o foo
                     Compile it
    $ gdb foo
                     Run GDB

    GNU gdb 6.3
    ...

    (gdb) break main
                     Set breakpoint
    Breakpoint 1 at 0x8048358: file foo.c, line 7.
    (gdb) run
                     Start it running
    Starting program: /tmp/foo

    Breakpoint 1, main () at foo.c:7
    7       for (i = 1; i <= 10; i++)
    (gdb) next
                     Next statement
    8           printf("i = %d\n", i);
    (gdb)                        ENTER repeats 'next'
    i = 1
    7       for (i = 1; i <= 10; i++)
    (gdb)                        Same
    8           printf("i = %d\n", i);
    (gdb)                        Same
    i = 2
    7       for (i = 1; i <= 10; i++)
    (gdb) until 9
                     Finish up the loop
    i = 3
    i = 4
    i = 5
    i = 6
    i = 7
    i = 8
    i = 9
    i = 10
    main () at foo.c:10
    10      printf("all done: i = %d\n", i);
    (gdb) continue
                     Finish program
    Continuing.
    all done: i = 11

    Program exited with code 021.
    (gdb)quit

Name

up

Synopsis

up count

Move up count stack frames. Positive values for count move towards less recent stack frames. See also frame and down.

Name

up-silently

Synopsis

up-silently count

Same as the up command, but don't print any messages. Intended mainly for use in GDB scripts.

Name

update

Synopsis

update

For the TUI, update the source window and the current execution point.

Name

watch

Synopsis

watch expression

Set a watchpoint to stop when expression is written. (Compare awatch and rwatch.)

Name

whatis

Synopsis

whatis [expression]

With no argument, print the type of the last value in the value history. This is equivalent to whatis $. With expression, print the type of expression. Note that the expression is not evaluated. No operators with side effects (such as ++, or a function call) execute. See also ptype.

Name

where

Synopsis

where [count]

Identical to the backtrace command; see backtrace for more information.

Name

while

Synopsis

while expression... commands ...
end

Repeatedly execute a series of commands. As long as expression is true, execute commands.

Name

winheight

Synopsis

winheight win ±amount

For the TUI, change the height of window win by amount. Using + increases the height; using - decreases it. The window name win may be one of asm, cmd, regs, or src.

Name

x

Synopsis

x [[/NFU] addr]

Examine the data at address. Subsequent x commands without an address move forward in memory according to the values for N, F, and U.

The N value is a repeat count, for example, to examine a given number of instructions. The F value is a format, indicating how to print the data. The U value is the unit size in bytes of the items to be displayed.

GDB stores the address printed by the x command in the $_ convenience variable. It stores the contents of the address in the $_ _ convenience variable.

Format Values

a

Print the value as an address. The address is printed as both an absolute (hexadecimal) address and as an offset from the nearest symbol.

c

Print the value as a character constant.

d

Print the value as a signed decimal integer.

f

Print the value as a floating point number.

i

Print the value as a machine instruction.

o

Print the value as an octal integer.

s

Print the value as a NUL-terminated string.

t

Print the value as a binary integer (t stands for "two").

u

Print the value as an unsigned decimal integer.

x

Print the value as a hexadecimal integer.

Unit Size Values

b

Bytes.

g

Giant words, i.e., 8 bytes.

h

Halfwords, i.e., 2 bytes.

w

Words, i.e., 4 bytes.

Chapter 18. Writing Manual Pages

The man command prints the online "manual page" for commands, system calls, functions, devices and file formats. Developers creating new software also need to create manual pages for their programs. This in turn requires a basic understanding of the Unix troff text-processing program and the man macro package.

This chapter presents the following topics:

Introduction

Overview of nroff/troff

Alphabetical summary of the man macros

Predefined strings

Names used internally by the man macros

Sample document

Introduction

The standard Unix text-processing tools are nroff and troff. They are not What You See Is What You Get (WYSIWYG) word-processors. Rather, they are text processing programs, where the input consists of a mixture of text to be formatted and special commands that instruct the programs how to format the text.

troff is for output devices such as typesetters and high resolution laser printers that can handle variable-width fonts and different character sizes. nroff is for simpler devices where all characters have the same width, such as terminals or line printers. Both programs accept the same set of commands; thus, carefully prepared input may be used with both programs to produce reasonable results. The original troff program worked for only one specific typesetter. The modern version, known as "device independent troff," or ditroff, can be tuned via specific drivers to work on multiple output devices.

Different commercial versions of Unix come with different versions of the troff suite. GNU/Linux and BSD systems all use GNU troff (groff), which is an excellent, full-featured implementation of ditroff and all the troff preprocessors. The Internet starting point for groff is http://www.gnu.org/software/groff/groff.html. We recommend downloading and building it if you intend to do serious troff-based typesetting work.[*]

Knowledge of nroff and troff was once an integral part of a Unix wizard's claims to Unix mastery. Over time though, they have been superseded for daily document preparation, either by WYSIWYG programs, or by TEX and LATEX. More information about troff in general is available from http://www.troff.org/.

However, one important task where knowledge of troff is still handy is the writing of manual pages (for the man command) to accompany software. This chapter introduces the subset of the troff command and feature set that is useful for writing manual pages, and then describes the man macros, concluding with a sample manual page. See also the Writing Manual Pages appendix in Classic Shell Scripting, cited in the Bibliography.

The canonical reference for nroff/troff is Bell Labs Computing Science Technical Report #54, Troff User's Manual, by J.F. Ossanna and B.W. Kernighan. It is available in PostScript from http://cm.bell-labs.com/cm/cs/cstr/54.ps.gz. You should read it if you plan to do any serious work in nroff/troff (such as writing or modifying macro packages). This document explains the ideas of diversions, environments, fields, registers, strings, and traps. The online Info documentation for groff explains the GNU-specific extensions that it supplies.

[*] groff is written in C++, so you may need a C++ compiler. In this case, you may first need to bootstrap g++, the GNU C++ compiler from GCC (the GNU Compiler Collection).

Overview of nroff/troff

This section is condensed from the material on troff from the third edition of this book. It covers features available in all versions of nroff and troff, and focuses on those features necessary for writing manual pages.

Command-Line Invocation

nroff and troff are invoked from the command line as follows:

    nroff  [options]  [files]
    troff  [options]  [files]

Although both formatters support a plethora of options, the following two are the most important for everyday use.

-m name

Prepend a macro file to input files. Historically, one of /usr/lib/tmac/tmac. name or /usr/share/lib/tmac/tmac. name were the locations of the macros for name. Solaris uses /usr/share/lib/tmac/ name. GNU troff uses something like /usr/local/share/groff/ x.y.z /tmac/ name .tmac. The actual location and filename(s) vary among different Unix systems.

-T name

Prepare output designed for printer or typesetter name. For device names, see your specific documentation or a local expert. GNU troff provides both PostScript and TEX DVI output.

Example

Format a manual page for printing using groff:

    $ groff -man /usr/share/man/man1/awk.1 | lpr

Conceptual Overview

This section provides a brief overview of how to prepare input for nroff and troff. It presents the following topics:

Requests and macros

Common requests

Specifying measurements

Requests that cause a line break

Embedded formatting controls

Requests and macros

Formatting is specified by embedding brief codes (called requests) into the text source file. These codes act as directives to nroff and troff when they run. For example, to center a line of text, type the following code in a file:

    .ce
    This text should be centered.

When formatted, the output appears centered:

                    This text should be centered.

There are two types of formatting codes:

Requests, which provide the most elementary instructions

Macros, which are predefined combinations of requests

Requests, also known as primitives, allow direct control of almost any feature of page layout and formatting. Macros combine requests to create a total effect. In a sense, requests are like statements, and macros are like functions.

All nroff/troff requests are two-letter lowercase names. Macros are usually upper- or mixed-case names. GNU troff removes the two-character restriction on the length of names.

Specifying measurements

With some requests, the numeric argument can be followed by a scale indicator that specifies a unit of measurement. The valid indicators and their meanings are listed in the following table. Note that all measurements are internally converted to basic units (this conversion is shown in the last column). A basic unit is the smallest possible size on the printer device. The device resolution (e.g., 600 dots per inch) determines the size of a basic unit. Also, T specifies the current point size, and R specifies the device resolution.

Scale indicator

Meaning

Equivalent unit

# of basic units

c

Centimeter

0.394 inches

R / 2.54

i

Inch

6 picas or 72 points

R

m

Em

T points

R × T / 72

n

En

0.5 em

R × T / 144

p

Point

1/72 inch

R / 72

P

Pica

1/6 inch

R / 6

u

Basic unit

1

v

Vertical line space

(Current value of line spacing in basic units)

None

Default

It is worth noting that all numbers in nroff/troff are stored internally using integers. This applies even to apparently fractional values in commands such as:

    .sp .5

which spaces down one-half of the current vertical spacing.

An "em" is the width of the letter "m" in the current font and point size. An "en" is the width of the letter "n" in the current font and point size. Note that in nroff, an "em" and an "en" are the same—the width of one character.

Requests that cause a line break

A line break occurs when nroff/troff writes the current output line, even if it is not completely filled. Most requests can be interspersed with text without causing a line break in the output. The following requests cause a break:

    .bp   .ce   .fi   .in   .sp
    .br   .cf   .fl   .nf   .ti

If you need to prevent these requests from causing a break, begin them with the "no break" control character (normally ') instead of a dot (.). For example, .bp flushes the current output line and starts a new page immediately. However, 'bp starts a new page, with the current output line not being written until it is full.

Embedded formatting controls

In addition to requests and macros, which are written on their own separate lines, you may also have formatting controls embedded within your text lines. These typically provide the following capabilities:

General formatting

Considerable formatting control is available, such as switching fonts (\f), changing point sizes (\s), computing widths (\w), and many other things. For example:

    This text is in \fIitalic\fR, but this is in roman.
    This text is \s-2VERY SMALL\s0 but this text is not.

Special characters

Predefined special typesetting characters, such as the bullet symbol \(bu (·), the left hand \(lh ( Embedded formatting controls ), and the right hand \(rh ( Embedded formatting controls ).

Strings

User-defined sequences of characters, like macros, but usable inline. For example:

    .\" define a shorthand for UNIX
    .ds UX  the \s-1UNIX\s0 Operating System
    ...
    Welcome to \*(UX.
    While \*(UX may appear daunting at first,
    it is immensely powerful. ...

Number registers

Like variables in programming languages, number registers store numeric values that can be printed in a range of formats (decimal, roman, etc.). Number registers hold integer values; fractional values are converted into the corresponding number of basic units. Number registers can be set to auto-increment or auto-decrement, and are particularly useful when writing macro packages, for managing automatic numbering of headings, footnotes, figures, and so on. For example:

    .nr Cl 0 1  \" Chapter Level
    .de CH
    .bp
    \\n+(Cl. \\$1 \\$2 \\$3
    ..

This creates a macro that uses register Cl as the "chapter level." The first three arguments to the macro (represented in the macro body by \\$1 etc.) become the chapter title. The extra backslashes are needed inside the macro definition to prevent too-early evaluation.

Comments in nroff/troff begin with \". Lines beginning with . that contain an unknown request are ignored. In general, don't put leading whitespace on your text lines. This causes a break, and nroff and troff honor the leading whitespace literally.

Outline of Useful Requests

The following is a list of the requests that you may see in manual pages, or that were mentioned earlier in the chapter.

.ad

Adjust margins.

.ls

Line spacing (e.g., single-spaced).

.bp

Begin a new page.

.na

Don't adjust margins.

.br

Break the output line.

.ne

Keep lines on same page if there's room.

.ce

Center lines.

.nf

Don't fill lines.

.cf

Copy raw file to output.

.nr

Define a number register.

.de

Define a macro.

.po

Change page offset.

.ds

Define a string.

.ps

Set point size.

.fi

Fill lines.

.so

Go to a file, then return.

.fl

Flush output buffer.

.sp

Output blank spacing.

.ft

Set font.

.ta

Define tab settings.

.in

Indent.

.ti

Indent next line (temporary indent).

.ll

Set line length.

.vs

Set vertical spacing for lines.

Useful Escape Sequences

This partial list of troff escape sequences provides those that are most useful.

Sequence

Effect

\\

Prevent or delay the interpretation of \.

\e

Printable version of the current escape character (usually \).

\-

- (minus sign in the current font).

\.

Period (dot).

\ space

Unpaddable space-size space character.

\ newline

Concealed (ignored) newline.

\|

1/6-em narrow space character (zero width in nroff).

\^

1/12-em half-narrow space character (zero width in nroff).

\&

Nonprinting, zero-width character.

\"

Beginning of comment.

\$ n

Interpolate macro argument 1 ≤ n ≤ 9.

\( xx

Character named xx. See the following section "Special Characters."

\*x or \*(xx

Interpolate string x or xx.

\fx or \f(xx or \fn

Change to font named x or xx or to position n. If x is P, return to the previous font.

\nx, \n(xx

Interpolate number register x or xx.

\n+x, \n+(xx

Interpolate number register x or xx, applying auto-increment.

\n-x, \n-(xx

Interpolate number register x or xx, applying auto-decrement.

\sn, \s±n

Change point size to n or increment by n. For example, \s0 returns to previous point size.

\s(nn, \s±(nn

Just like \s, but allow unambiguous two-character point sizes (ditroff only).

\w' string '

Interpolate width of string in basic units.

Special Characters

Table 18-1 lists the special characters that reside in the standard fonts. troff includes a large number of other characters that we have not described here, since they are mostly for typesetting mathematics.

Table 18-1. Characters in the standard fonts

Input

Char

Character name

'

'

Close quote

'

'

Open quote

\(em

—

Em-dash (width of "m")

\(en

–

En-dash (width of "n")

\-

−

Minus in current font

-

-

Hyphen

\(hy

-

Hyphen

\(bu

·

Bullet

\(sq

□

Square

\(rg

®

Registered

\(co

©

Copyright

Alphabetical Summary of man Macros

Brian Kernighan describes the reason for macro packages very pithily:

Since bare troff is unusable by humans, a race of gods now gone created macro packages for mortals to use.

Today, the man macros are the most widely used macro package. They are used for writing program manual pages for the online manual, accessed via the man command.

As many as six arguments may be given for all the macros that change fonts or produce a heading. The seventh and later arguments are ignored. Use double quotes around multiple words to get longer headings.

The .TS, .TE, .EQ, and .EN macros are not defined by the man macros. Because nroff and troff ignore unknown requests, you can still use them in your manpages; tbl and eqn work with no problems.

Name

.B

Synopsis

.B [text ...]

Set the arguments in the bold font, with a space between each argument. If no arguments are supplied, the next input line is set in bold.

Name

.BI

Synopsis

.BI barg iarg ...

Set alternating barg in bold and iarg in italic, with no intervening spaces.

Name

.BR

Synopsis

.BR barg rarg ...

Set alternating barg in bold and rarg in roman, with no intervening spaces.

Name

.DT

Synopsis

.DT

Reset the tab stops to their defaults, every 1/2 inch.

Name

.HP

Synopsis

.HP [indent]tag text

Start a paragraph with a "hanging" indent, one where a tag sits out to the left side. The optional indent is how far to indent the paragraph. The tag text follows on the next line. See the example under .TP.

Name

.I

Synopsis

.I [text ...]

Set the arguments in the italic font, with a space between each argument. If no arguments are supplied, the next input line is set in italic.

Name

.IB

Synopsis

.IB iarg barg ...

Set alternating iarg in italic and barg in bold, with no intervening spaces.

Name

.IP

Synopsis

.IP tag [indent]

Start a paragraph with a hanging indent, one where a tag sits out to the left side. Unlike .HP and .TP, the tag is supplied as an argument to the macro. The optional indent is how far to indent the paragraph.

Example

.IP 1.
    The first point is ...
    .IP 2.
    The second point is ...

Name

.IR

Synopsis

.IR iarg rarg ...

Set alternating iarg in italic and rarg in roman, with no intervening spaces.

Name

.LP

Synopsis

.LP

Start a new paragraph. Just like .PP.

Name

.P

Synopsis

.P

Start a new paragraph. Just like .PP.

Name

.PD

Synopsis

.PD [distance]

Set the interparagraph spacing to distance. With no argument, reset it to the default. Most useful to get multiple tags for a paragraph.

Example

Show that two options do the same thing:

    .PP
    .I Whizprog
    accepts the following options.
    .TP \w'\fB\-\^\-help\fP'u+3n
    .PD 0
    .B \-h
    .TP
    .PD
    .B \-\^\-help
    Print a helpful message and exit.

Name

.PP

Synopsis

.PP

Start a new paragraph. This macro resets all the defaults, such as point size, font, and spacing.

Name

.RB

Synopsis

.RB rarg barg ...

Set alternating rarg in roman and barg in bold, with no intervening spaces.

Name

.RE

Synopsis

.RE

End a relative indent. Each .RE should match a preceding .RS. See .RS for an example.

Name

.RI

Synopsis

.RI rarg iarg ...

Set alternating rarg in roman and iarg in italic, with no intervening spaces.

Name

.RS

Synopsis

.RS [indent]

Start a relative indent. Each successive .RS increases the indent. The optional indent is how far to indent the following text. Each .RS should have an accompanying .RE.

Example

.PP
    There are a number of important points to remember.
    .RS
    .IP 1.
    The first point is ...
    .IP 2.
    The second point is ...
    ...
    .RE
    Forget these at your own risk!

Name

.SB

Synopsis

.SB arg ...

Set arguments in bold, using a smaller point size, separated by spaces.

Name

.SH

Synopsis

.SH arg ...

Section header. Start a new section, such as NAME or SYNOPSIS. Use double quotes around multiple words for longer headings.

Name

.SM

Synopsis

.SM arg ...

Set arguments in roman, using a smaller point size, separated by spaces.

Name

.SS

Synopsis

.SS arg ...

Subsection header. Start a new subsection. Use double quotes around multiple words for longer headings.

Name

.TH

Synopsis

.TH title section date ...

Title heading. This is the first macro of a manpage, and sets the header and footer lines. The title is the name of the manpage. The section is the section the manpage should be in (a number, possibly followed by a letter). The date is the date the manpage was last updated. Different systems have different conventions for the remaining arguments to this macro. For Solaris, the fourth and fifth arguments are the left-page footer and the main (center) header.

Example

.TH WHIZPROG 1L "April 1, 2007"
    .SH NAME
    whizprog \- do amazing things
    ...

Name

.TP

Synopsis

.TP [indent]tag text

Start a paragraph with a hanging indent, one where a tag sits out to the left side. The optional indent is how far to indent the paragraph. The tag text follows on the next line. See also the example under .PD.

Example

.TP .2i
    1.
    The first point is ...
    .TP .2i
    2.
    The second point is ...

Predefined Strings

The following strings are predefined by the man macros; of these, only R and S are documented.

String

Effect in troff

Effect in nroff

\*(lq

'' ('')

"

\*(rq

'' ('')

"

\*R

\(rg (®)

(Reg.)

\*S

Restore default point size

Restore default point size

Internal Names

The Solaris man macros use a number of macro, string, and number register names that begin with ], }, and ). Such names should be avoided in your own files.

The number registers D, IN, LL, P, X, d, m, and x are used internally by the Solaris man macros. Using .nr D 1 before calling the .TH macro generates pages with different even and odd footers.[*]

[*] This information was gleaned by examining the actual macros. It is not documented, so Your Mileage May Vary.

Sample Document

The output of this sample document is shown in Figure 18-1.

    .TH WHIZPROG 1 "April 1, 2007"
    .SH NAME
    whizprog \- do amazing things
    .SH SYNOPSIS
    .B whizprog
    [
    .I options
    ] [
    .I files
    \&... ]
    .SH DESCRIPTION
    .I Whizprog
    is the next generation of really
    .B cool
    do-it-all programs. ...
    .SH OPTIONS
    .PP
    .I Whizprog
    accepts the following options.
    .TP \w'\fB\-\^\-level\fP'u+3n
    .PD 0
    .B \-h
    .TP
    .PD
    .B \-\^\-help
    Print a helpful message and exit.
    .TP
    .BI \-\^\-level " level"
    Set the level for the
    .B \-\^\-stun
    option.
    .TP
    .B \-\^\-stun
    Stun the competition, or other beings, as needed. ...
    .SH SEE ALSO
    .IR "Whizprog \- The Be All and End All Program" ,
    by J. Programmer.
    .PP
    .IR wimpprog (1)
    .SH FILES
    .B /dev/phaser
    .br
    .B /dev/telepath
    .SH CAVEATS
    .PP
    There are a number of important points to remember.
    .RS
    .IP 1.
    Use
    .B \-\^\-help
    to get help.
    .IP 2.
    Use
    .B \-\^\-stun
    with care.  ...
    .RE
    Forget these at your own risk!
    .SH BUGS
    The
    .B \-\^\-stun
    option currently always uses
    .BR "\-\^\-level 10" ,
    making it rather dangerous.
    .SH AUTHOR
    J. Programmer,
    .B jp@wizard-corp.com

Figure 18-1. Output of sample document

Part IV. References

Part IV contains an Appendix of ISO 8859-1 (Latin-1) characters and a Unix Bibliography.

Appendix: ISO 8859-1 (Latin-1) Character Set

Bibliography

Appendix A. ISO 8859-1 (Latin-1) Character Set

This appendix presents the set of ISO 8859-1 (Latin-1) characters, along with their equivalent values in decimal, octal, and hexadecimal. This character set suffices for English and languages that can be written using just the English alphabet, plus the major Western European languages. The lower half of this set of characters is identical to traditional ASCII . Table A-1 shows nonprinting characters; it's useful when you need to represent nonprinting characters in some printed form, such as octal. For example, the echo and tr commands let you specify characters using octal values of the form \nnn. Also, the od command can display nonprinting characters in a variety of forms.

Table A-2 shows printing characters. This table is useful when using the previous commands, but also when specifying a range of characters in a pattern-matching construct. The characters from decimal 128–159 are not used in Latin-1.

Table A-1. Nonprinting characters

Decimal

Octal

Hex

Character

Remark

0

000

00

CTRL-@

NUL (Null prompt)

1

001

01

CTRL-A

SOH (Start of heading)

2

002

02

CTRL-B

STX (Start of text)

3

003

03

CTRL-C

ETX (End of text)

4

004

04

CTRL-D

EOT (End of transmission)

5

005

05

CTRL-E

ENQ (Enquiry)

6

006

06

CTRL-F

ACK (Acknowledge)

7

007

07

CTRL-G

BEL (Bell)

8

010

08

CTRL-H

BS (Backspace)

9

011

09

CTRL-I

HT (Horizontal tab)

10

012

0A

CTRL-J

LF (Linefeed)

11

013

0B

CTRL-K

VT (Vertical tab)

12

014

0C

CTRL-L

FF (Formfeed)

13

015

0D

CTRL-M

CR (Carriage return)

14

016

0E

CTRL-N

SO (Shift out)

15

017

0F

CTRL-O

SI (Shift in)

16

020

10

CTRL-P

DLE (Data link escape)

17

021

11

CTRL-Q

DC1 (XON)

18

022

12

CTRL-R

DC2

19

023

13

CTRL-S

DC3 (XOFF)

20

024

14

CTRL-T

DC4

21

025

15

CTRL-U

NAK (Negative acknowledge)

22

026

16

CTRL-V

SYN (Synchronous idle)

23

027

17

CTRL-W

ETB (End transmission blocks)

24

030

18

CTRL-X

CAN (Cancel)

25

031

19

CTRL-Y

EM (End of medium)

26

032

1A

CTRL-Z

SUB (Substitute)

27

033

1B

CTRL-[

ESC (Escape)

28

034

1C

CTRL-\

FS (File separator)

29

035

1D

CTRL-]

GS (Group separator)

30

036

1E

CTRL-^

RS (Record separator)

31

037

1F

CTRL-_

US (Unit separator)

127

177

7F

DEL (Delete or rubout)

Table A-2. Printing characters

Decimal

Octal

Hex

Character

Remark

32

040

20

Space

33

041

21

!

Exclamation point

34

042

22

"

Double quote

35

043

23

#

Number sign

36

044

24

$

Dollar sign

37

045

25

%

Percent sign

38

046

26

&

Ampersand

39

047

27

'

Apostrophe

40

050

28

(

Left parenthesis

41

051

29

)

Right parenthesis

42

052

2A

*

Asterisk

43

053

2B

+

Plus sign

44

054

2C

,

Comma

45

055

2D

-

Hyphen

46

056

2E

.

Period

47

057

2F

/

Slash

48

060

30

0

49

061

31

1

50

062

32

2

51

063

33

3

52

064

34

4

53

065

35

5

54

066

36

6

55

067

37

7

56

070

38

8

57

071

39

9

58

072

3A

:

Colon

59

073

3B

;

Semicolon

60

074

3C

<

Left angle bracket

61

075

3D

=

Equal sign

62

076

3E

>

Right angle bracket

63

077

3F

?

Question mark

64

100

40

@

At sign

65

101

41

A

66

102

42

B

67

103

43

C

68

104

44

D

69

105

45

E

70

106

46

F

71

107

47

G

72

110

48

H

73

111

49

I

74

112

4A

J

75

113

4B

K

76

114

4C

L

77

115

4D

M

78

116

4E

N

79

117

4F

O

80

120

50

P

81

121

51

Q

82

122

52

R

83

123

53

S

84

124

54

T

85

125

55

U

86

126

56

V

87

127

57

W

88

130

58

X

89

131

59

Y

90

132

5A

Z

91

133

5B

[

Left square bracket

92

134

5C

\

Backslash

93

135

5D

]

Right square bracket

94

136

5E

^

Caret

95

137

5F

_

Underscore

96

140

60

'

Back quote

97

141

61

a

98

142

62

b

99

143

63

c

100

144

64

d

101

145

65

e

102

146

66

f

103

147

67

g

104

150

68

h

105

151

69

i

106

152

6A

j

107

153

6B

k

108

154

6C

l

109

155

6D

m

110

156

6E

n

111

157

6F

o

112

160

70

p

113

161

71

q

114

162

72

r

115

163

73

s

116

164

74

t

117

165

75

u

118

166

76

v

119

167

77

w

120

170

78

x

121

171

79

y

122

172

7A

z

123

173

7B

{

Left curly brace

124

174

7C

|

Vertical bar

125

175

7D

}

Right curly brace

126

176

7E

~

Tilde

160

240

A0

Non-breaking space

161

241

A1

¡

Inverted exclamation

162

242

A2

¢

Cent sign

163

243

A3

£

Pound sign (British currency)

164

244

A4

¤

Currency sign

165

245

A5

¥

Yen sign

166

246

A6

|

Broken bar

167

247

A7

§

Section symbol

168

250

A8

̈

Umlaut or diaeresis

169

251

A9

©

Copyright symbol

170

252

AA

ª

Feminine ordinal

171

253

AB

«

Left angle quotes

172

254

AC

¬

Logical not symbol

173

255

AD

-

Soft hyphen

174

256

AE

®

Registered trademark symbol

175

257

AF

-

Spacing macron

176

260

B0

¬

Degree sign

177

261

B1

±

Plus-minus

178

262

B2

²

Superscript 2

179

263

B3

³

Superscript 3

180

264

B4

′

Spacing acute

181

265

B5

μ

Micro sign

182

266

B6

¶

Paragraph symbol

183

267

B7

·

Middle dot

184

270

B8

¸

Spacing cedilia

185

271

B9

i

Superscript 1

186

272

BA

º

Masculine ordinal

187

273

BB

»

Right angle quotes

188

274

BC

¹/₄

One-fourth

189

275

BD

¹/₂

One-half

190

276

BE

³/₄

Three-fourths

191

277

BF

¿

Inverted question mark

192

300

C0

À

A with grave accent

193

301

C1

Á

A with acute accent

194

302

C2

Â

A with circumflex

195

303

C3

Ã

A with tilde

196

304

C4

Ä

A with umlaut

197

305

C5

Å

A with ring accent

198

306

C6

Æ

AE ligature

199

307

C7

Ç

C with cedilia

200

310

C8

È

E with grave accent

201

311

C9

É

E with acute accent

202

312

CA

Ê

E with circumflex

203

313

CB

Ë

E with umlaut

204

314

CC

Ì

I with grave accent

205

315

CD

í

I with acute accent

206

316

CE

Î

I with circumflex

207

317

CF

Ï

I with umlaut

208

320

D0

D

Eth (Icelandic)

209

321

D1

Ñ

N with tilde

210

322

D2

Ò

O with grave accent

211

323

D3

Ó

O with acute accent

212

324

D4

Ô

O with circumflex

213

325

D5

Õ

O with tilde

214

326

D6

Ö

O with umlaut

215

327

D7

×

Multiplication sign

216

330

D8

Ø

O with slash

217

331

D9

Ù

U with grave accent

218

332

DA

Ú

U with acute accent

219

333

DB

û

U with circumflex

220

334

DC

Ü

U with umlaut

221

335

DD

ý

Y with acute accent

222

336

DE

þ

Thorn (Icelandic)

223

337

DF

ß

Sharp s

224

340

E0

à

a with grave accent

225

341

E1

á

a with acute accent

226

342

E2

â

a with circumflex

227

343

E3

ã

a with tilde

228

344

E4

ä

a with umlaut

229

345

E5

å

a with ring accent

230

346

E6

æ

ae ligature

231

347

E7

ç

c with cedilia

232

350

E8

è

e with grave accent

233

351

E9

é

e with acute accent

234

352

EA

ê

e with circumflex

235

353

EB

ë

e with umlaut

236

354

EC

ì

i with grave accent

237

355

ED

í

i with acute accent

238

356

EE

î

i with circumflex

239

357

EF

ï

i with umlaut

240

360

F0

D

eth (Icelandic)

241

361

F1

ñ

n with tilde

242

362

F2

ò

o with grave accent

243

363

F3

ó

o with acute accent

244

364

F4

ô

o with circumflex

245

365

F5

õ

o with tilde

246

366

F6

ö

o with umlaut

247

367

F7

⋇

Division sign

248

370

F8

Ø

o with slash

249

371

F9

ù

u with grave accent

250

372

FA

ú

u with acute accent

251

373

FB

Û

u with circumflex

252

374

FC

ü

u with umlaut

253

375

FD

ý

y with acute accent

254

376

FE

þ

thorn (Icelandic)

255

377

FF

ÿ

y with umlaut

Appendix B. Bibliography

Many books have been written about Unix and related topics. It would be impossible to list them all, nor would that be very helpful. In this chapter, we present the "classics"--those books that the true Unix wizard has on his or her shelf. (Alas, some of these are now out of print; thus only older Unix wizards have them.)

Because Unix has affected many aspects of computing, you will find books listed here on things besides just the Unix operating system itself.

This chapter presents:

Unix descriptions and programmer's manuals

Unix internals

System and network administration

Programming with the Unix mindset

Programming languages

TCP/IP networking

Software development

Emacs

Standards

O'Reilly books

Unix Descriptions and Programmer's Manuals

The Bell System Technical Journal, Volume 57 Number 6, Part 2, July-August 1978. AT&T Bell Laboratories, Murray Hill, NJ, USA. ISSN 0005-8580. A special issue devoted to Unix, by the creators of the system.

AT&T Bell Laboratories Technical Journal, Volume 63 Number 8, Part 2, October 1984. AT&T Bell Laboratories, Murray Hill, NJ, USA. Another special issue devoted to Unix.

These two volumes were republished as:

UNIX System Readings and Applications, Volume 1, Prentice Hall, Englewood Cliffs, NJ, USA, 1987. ISBN 0-13-938532-0.

UNIX System Readings and Applications, Volume 2, Prentice Hall, Englewood Cliffs, NJ, USA, 1987. ISBN 0-13-939845-7.

UNIX Time-sharing System: UNIX Programmers Manual, Seventh Edition, Volumes 1, 2A, 2B. Bell Telephone Laboratories, Inc., January 1979.

These are the reference manuals (Volume 1), and descriptive papers (Volumes 2A and 2B) for the landmark Seventh Edition Unix system, the direct ancestor of all current commercial Unix systems.

They were reprinted by Holt Rinehart & Winston, but are now long out of print. However, they are available online from Bell Labs in troff source, PDF, and PostScript formats. See http://plan9.bell-labs.com/7thEdMan.

UNIX Research System: Programmer's Manual, Tenth Edition, Volume 1, AT&T Bell Laboratories, M.D. McIlroy and A.G. Hume editors, Holt Rinehart & Winston, New York, NY, USA, 1990. ISBN 0-03-047532-5.

UNIX Research System: Papers, Tenth Edition, Volume 2, AT&T Bell Laboratories, M.D. McIlroy and A.G. Hume editors, Holt Rinehart & Winston, New York, NY, USA, 1990. ISBN 0-03-047529-5.

These are the manuals and papers for the Tenth Edition Unix system. Although this system was not used much outside of Bell Labs, many of the ideas from it and its predecessors were incorporated into various versions of System V. The manuals make interesting reading, in any case.

4.4BSD Manuals, Computing Systems Research Group, University of California, Berkeley. O'Reilly Media, Inc., Sebastopol, CA, USA, 1994. ISBN 1-56592-082-1. Out of print.

The manuals for 4.4BSD.

Your Unix programmer's manual. One of the most instructive things you can do is read your manual from front to back.[1] (This is harder than it used to be, as Unix systems have grown.) It is easier to do if your Unix vendor makes printed copies of its documentation available. Otherwise, start with the Seventh Edition manual, and then read your local documentation as needed.

A Quarter Century of Unix, Peter H. Salus. Addison-Wesley, Reading, MA, USA, 1994. ISBN 0-201-54777-5.

A delightful book that tells the history of Unix, from its inception up to the time the book was written. It reads like a good novel, except that it's all true!

Linux and the Unix Philosophy, Mike Gancarz. Digital Press, Bedford, MA, USA, 2003. ISBN 1-55558-273-7.

[1] One summer, while working as a contract programmer, I spent my lunchtimes reading the manual for System III (yes, that long ago) from cover to cover. I don't know that I ever learned so much in so little time.

Unix Internals

The dedicated Unix wizard knows not only how to use his or her system, but how it works.

Lions' Commentary on UNIX 6th Edition, with Source Code, John Lions. Peer-To-Peer Communications LLC, Charlottesville, VA, USA, 2005. ISBN 1-57398-013-7. http://www.peerllc.com/.

This classic work provides the source code for the Sixth Edition Unix kernel, with a complete exegesis of it. It set the standard for clear exposition of operating system internals.

The Design of the UNIX Operating System, Maurice J. Bach. Prentice Hall, Englewood Cliffs, NJ, USA, 1986. ISBN 0-13-201799-7.

This book very lucidly describes the design of System V Release 2, with some discussion of important features in System V Release 3, such as STREAMS and the filesystem switch.

The Magic Garden Explained: The Internals of Unix System V Release 4: An Open Systems Design, Berny Goodheart, James Cox, and John R. Mashey. Prentice Hall, Englewood Cliffs, NJ, USA, 1994. ISBN 0-13-098138-9.

Unix Internals: The New Frontiers, Uresh Vahalia. Prentice Hall, Englewood Cliffs, NJ, USA, 1996. ISBN 0-13-101908-2.

Solaris Internals: Core Kernel Architecture, Jim Mauro and Richard McDougall. Prentice Hall PTR, Upper Saddle River, NJ, USA, 2000. ISBN 0-13-022496-0.

UNIX(R) Systems for Modern Architectures: Symmetric Multiprocessing and Caching for Kernel Programmers, Curt Schimmel. Addison-Wesley, Reading, MA, USA, 1994. ISBN 0-201-63338-8.

The Design and Implementation of the 4.3BSD UNIX Operating System, Samuel J. Leffler, Marshall Kirk McKusick, Michael J. Karels and John S. Quarterman. Addison-Wesley, Reading, MA, USA, 1989. ISBN 0-201-06196-1.

This book describes the 4.3BSD version of Unix. Many important features found in commercial Unix systems first originated in the BSD Unix systems, such as long filenames, job control, and networking.

The Design and Implementation of the 4.4 BSD Operating System, Marshall Kirk McKusick, Keith Bostic, Michael J. Karels, and John S. Quarterman. Addison Wesley Longman, Reading, MA, USA, 1996. ISBN 0-201-54979-4.

This book is an update of the previous one, for 4.4BSD, the last Unix system released from UCB. To quote from the publisher's description, the book "details the major changes in process and memory management, describes the new extensible and stackable filesystem interface, includes an invaluable chapter on the new network filesystem, and updates information on networking and interprocess communication."

The Design and Implementation of the FreeBSD Operating System, Marshall Kirk McKusick and George V. Neville-Neil. Addison-Wesley, Reading, MA, USA, 2005. ISBN 0-201-70245-2.

An update of the previous book, focusing on the FreeBSD operating system. It presents the state of current BSD operating system technology.

Linux Kernel Development, Second Edition, Robert Love. Novell Press, Que Publishing, Indianapolis, IN, USA, 2005. ISBN 0-672-32720-1.

Understanding the Linux Kernel, Second Edition, Daniel P. Bovet, and Marco Cesati. O'Reilly Media, Inc., Sebastopol, CA, USA, 2002. ISBN 0-596-00213-0.

Linux Device Drivers, Third Edition, Jonathan Corbet, Alessandro Rubini, and Greg Kroah-Hartman. O'Reilly Media, Inc. Sebastopol, CA, USA, 2005. ISBN 0-596-00590-3

System and Network Administration

Unix system administration is a complicated topic in its own right. In these days of single-user workstations, even regular users also have to understand basic system administration tasks. Besides managing the system (users, filesystems, accounting), administrators also have to understand TCP/IP network administration.

UNIX System Administration Handbook, Third Edition, Evi Nemeth, Garth Snyder, Scott Seebass, and Trent R. Hein. Prentice Hall PTR, Upper Saddle River, NJ, USA, 2000. ISBN 0-13-020601-6.

Linux Administration Handbook, Evi Nemeth, Garth Snyder, and Trent R. Hein. Prentice Hall PTR, Upper Saddle River, NJ, USA, 2002. ISBN 0-13-008466-2.

A revision of the previous book focused on GNU/Linux.

Essential System Administration, Third Edition, Æleen Frisch. O'Reilly Media, Inc., Sebastopol, CA, USA, 2002. ISBN 0-596-00343-9.

DNS and BIND, Fouth Edition, Paul Albitz and Cricket Liu. O'Reilly Media, Inc., Sebastopol, CA, USA, 2001. ISBN 0-596-00158-4.

TCP/IP Network Administration, Third Edition, Craig Hunt. O'Reilly Media, Inc., Sebastopol, CA, USA, 2002. ISBN 0-596-00297-1.

Linux Network Administrator's Guide, Third Edition, Tony Bautts, Terry Dawson, and Gregor N. Purdy. O'Reilly Media, Inc. Sebastopol, CA, USA, 2005. ISBN 0-596-00548-2.

Programming with the Unix Mindset

Any book written by Brian Kernighan deserves careful reading, usually several times. The first two books present the Unix "toolbox" programming methodology. They will help you learn how to "think Unix." The third book continues the process, with a more explicit Unix focus. The fourth and fifth are about programming in general, and also very worthwhile.

Software Tools, Brian W. Kernighan and P. J. Plauger. Addison-Wesley, Reading, MA, USA, 1976. ISBN 0-201-03669-X.

A wonderful book[2] that presents the design and code for programs equivalent to Unix's grep, sort, ed, and others. The programs use RATFOR (Rational FORTRAN), a preprocessor for FORTRAN with C-like control structures.

Software Tools in Pascal, Brian W. Kernighan and P. J. Plauger. Addison-Wesley, Reading, MA, USA, 1981. ISBN 0-201-10342-7.

A translation of the previous book into Pascal. Still worth reading; Pascal provides many things that FORTRAN does not.

The Unix Programming Environment, Brian W. Kernighan and Rob Pike. Prentice Hall, Englewood Cliffs, NJ, USA, 1984. ISBN 0-13-937699-2 (hardcover), 0-13-937681-X (paperback).

This books focuses explicitly on Unix, using the tools in that environment. In particular, it adds important material on the shell, awk, and the use of lex and yacc. See http://cm.bell-labs.com/cm/cs/upe.

The Elements of Programming Style, Second Edition, Brian W. Kernighan and P. J. Plauger. McGraw-Hill, New York, NY, USA, 1978. ISBN 0-07-034207-5.

Modeled after Strunk & White's famous The Elements of Style, this book describes good programming practices that can be used in any environment.

The Practice of Programming, Brian W. Kernighan and Rob Pike. Addison Wesley Longman, Reading, MA, USA, 1999. ISBN 0-201-61586-X.

Similar to the previous book, with a somewhat stronger technical focus. See http://cm.bell-labs.com/cm/cs/tpop.

The Art of UNIX Programming, Eric S. Raymond. Addison-Wesley, Reading, MA, USA, 2003. ISBN 0-13-124085-4.

We don't agree with everything the author says, but this book is still worth reading.

Writing Efficient Programs, Jon Louis Bentley. Prentice Hall, Englewood Cliffs, NJ, USA, 1982. ISBN 0-13-970251-2 (hardcover), 0-13-970244-X (paperback).

Although not related to Unix, this is an excellent book for anyone interested in programming efficiently.

Programming Pearls, Second Edition, Jon Louis Bentley. Addison-Wesley, Reading, MA, USA, 2000. ISBN 0-201-65788-0.

More Programming Pearls: Confessions of a Coder, Jon Louis Bentley. Addison-Wesley, Reading, MA, USA, 1988. ISBN 0-201-11889-0.

These two excellent books, to quote Nelson H. F. Beebe, "epitomize the Unix mindset, and are wonderful examples of little languages, algorithm design, and much more." These should be on every serious programmer's bookshelf.

Advanced Programming in the UNIX Environment, Second Edition, W. Richard Stevens and Stephen Rago. Addison-Wesley, Reading, MA, USA, 2005. ISBN 0-201-43307-9.

A thick but excellent work on how to use the wealth of system calls in modern Unix systems.

Linux Programming by Example: The Fundamentals, Arnold Robbins. Prentice Hall PTR, Upper Saddle River, NJ, USA, 2004. ISBN 0-13-142964-7.

This book is more selective than the one by Stevens and Rago, focusing on the core systems calls and library functions used by most standard applications. Wherever possible, it uses example code from both V7 Unix and GNU software for demonstration.

Advanced UNIX Programming, Second Edition, Marc J. Rochkind, Addison-Wesley, Reading, MA, USA, 2004. ISBN 0-13-141154-3.

[2] One that changed my life forever.

Programming Languages

A number of important programming languages were first developed under Unix. Note again the books written by Brian Kernighan.

The C Programming Language, Brian W. Kernighan and Dennis M. Ritchie. Prentice Hall, Englewood Cliffs, NJ, USA, 1978. ISBN 0-13-110163-3.

The original "bible" on C. Dennis Ritchie invented C and is one of the two "fathers" of Unix. This edition is out of print.

The C Programming Language, Second Edition, Brian W. Kernighan and Dennis M. Ritchie. Prentice Hall, Englewood Cliffs, NJ, USA, 1988. ISBN 0-13-110362-8.

This revision of the original covers the 1990 version of Standard C. It retains and improves upon the high qualities of the first edition. See http://cm.bell-labs.com/cm/cs/cbook.

C: A Reference Manual, Fifth Edition, Samuel P. Harbison III and Guy L. Steele. Prentice Hall, Upper Saddle River, NJ, USA, 2002. ISBN 0-13-089592-X.

An excellent discussion of the details for those who need to know. This edition covers everything from the original, pre-Standard C, through the 1999 version of Standard C.

The C++ Programming Language, Special Third Edition, Bjarne Stroustrup. Addison-Wesley, Reading, MA, USA, 2000. ISBN 0-201-70073-5.

The definitive statement on C++ by the language's inventor and the ANSI C++ committee chair. See http://www.awl.com/cseng/titles/0-201-70073-5/.

The C++ Standard Library—A Tutorial and Reference, Nicolai M. Josuttis. Addison-Wesley, Reading, MA, USA, 1999. ISBN 0-201-37926-0.

C++ Primer, Third Edition, Stanley B. Lippman and Josée Lajoie. Addison Wesley Longman, Reading, MA, USA, 1998. ISBN 0-201-82470-1.

This is an excellent introduction to C++. See http://www.awl.com/cseng/titles/0-201-82470-1/.

The Annotated C++ Reference Manual, Margaret A. Ellis and Bjarne Stroustrup. Addison-Wesley, Reading, MA, USA, 1990. ISBN 0-201-51459-1.

The first attempt to rigorously define the C++ language. This book became one of the base documents for the ANSI C++ standardization committee. It is now of mostly historical interest. See http://www.awl.com/cseng/titles/0-201-51459-1/.

The Java Programming Language, Third Edition, Ken Arnold, James Gosling and David Holmes. Addison-Wesley, Reading, MA, USA, 2000. ISBN 0-201-70433-1.

This book is intended for learning Java. The first two authors are two of the designers of the language.

The Java Language Specification, Second Edition, James Gosling, Bill Joy, Guy L. Steele Jr. and Gilad Bracha. Addison-Wesley, Reading, MA, USA, 2000. ISBN 0-201-31008-2.

The AWK Programming Language, Alfred V. Aho, Brian W. Kernighan, and Peter J. Weinberger. Addison-Wesley, Reading, MA, USA, 1987. ISBN 0-201-07981-X.

The original definition for the awk programming language. Extremely worthwhile. See http://cm.bell-labs.com/cm/cs/awkbook.

Effective awk Programming, Third Edition, Arnold Robbins. O'Reilly Media, Inc., Sebastopol, CA, USA, 2001. ISBN 0-596-00070-7.

A more tutorial treatment of awk that covers the POSIX standard for awk. It also serves as the user's guide for gawk.

Tcl and the Tk Toolkit, John K. Ousterhout. Addison-Wesley, Reading, MA, USA, 1994. ISBN 0-201-63337-X.

The first book on Tcl/Tk. this book is now out of date, although it was written by the creator of Tcl/Tk.

Practical Programming in Tcl & Tk, Fourth Edition, Brent B. Welch, Ken Jones, and Jeffry Hobbs. Prentice Hall PTR, Upper Saddle River, NJ, USA, 2003. ISBN 0-13-038560-3

Effective Tcl/Tk Programming: Writing Better Programs in Tcl and Tk, Mark Harrison and Michael J. McLennan. Addison-Wesley, Reading, MA, USA, 1997. ISBN 0-201-63474-0.

The New Kornshell Command and Programming Language, Morris I. Bolsky and David G. Korn. Prentice Hall, Englewood Cliffs, NJ, USA, 1995. ISBN 0-13-182700-6.

The definitive work on the Korn shell, by its author.

Hands-On KornShell 93 Programming, Barry Rosenberg. Addison Wesley Longman, Reading, MA, USA, 1998. ISBN 0-201-31018-X.

Compilers—Principles, Techniques, and Tools, Alfred V. Aho and Ravi Sethi and Jeffrey D. Ullman. Addison Wesley Longman, Reading, MA, USA, 1986. ISBN 0-201-10088-6.

This is the famous "dragon book" on compiler construction. It provides much of the theory behind the operation of lex and yacc.

TCP/IP Networking

The books by Comer are well-written; they are the standard descriptions of the TCP/IP protocols. The books by Stevens are also very highly regarded.

Internetworking with TCP/IP Volume 1: Principles, Protocols, and Architecture, Fourth Edition, Douglas E. Comer. Prentice Hall, Upper Saddle River, NJ, USA, 2000. ISBN 0-13-018380-6.

Internetworking With TCP/IP Volume 2: ANSI C Version: Design, Implementation, and Internals, Third Edition, Douglas E. Comer and David L. Stevens. Prentice Hall, Englewood Cliffs, NJ, USA, 1998. ISBN 0-13-973843-6.

Internetworking With TCP/IP Volume 3: Client-Server Programming and Applications: Linux/Posix Sockets Version, Second Edition, Douglas E. Comer, David L. Stevens, Marshall T. Rose, and Michael Evangelista. Prentice-Hall, Englewood Cliffs, NJ, USA, 2000. ISBN 0-13-032071-4.

TCP/IP Illustrated, Volume 1: The Protocols, W. Richard Stevens. Addison Wesley Longman, Reading, MA, USA, 1994. ISBN 0-201-63346-9.

TCP/IP Illustrated, Volume 2: The Implementation, W. Richard Stevens and Gary R. Wright. Addison Wesley Longman, Reading, MA, USA, 1995. ISBN 0-201-63354-X.

TCP/IP Illustrated, Volume 3: TCP for Transactions, HTTP, NNTP, and the Unix Domain Protocols, W. Richard Stevens. Addison Wesley Longman, Reading, MA, USA, 1996. ISBN 0-201-63495-3.

Unix Network Programming, Volume 1: The Sockets Networking API, Third Edition W. Richard Stevens, Bill Fenner and Andrew M. Rudoff. Addison-Wesley, Reading, MA, USA, 2003. ISBN 0-13-141155-1.

Unix Network Programming, Volume 2: Interprocess Communications, Second Edition, W. Richard Stevens. Prentice Hall PTR, Upper Saddle River, NJ, USA, 1998. ISBN 0-13-081081-9.

Software Development

Applying RCS and SCCS, Don Bolinger and Tan Bronson. O'Reilly Media, Inc., Sebastopol, CA, USA, 1995. ISBN 1-56592-117-8.

Open Source Development with CVS, Third Edition, Karl Fogel and Moshe Bar. Paraglyph Press, Phoenix, AZ, USA, 2003. ISBN 1932111816.

This book is available online: see http://cvsbook.red-bean.com/.

Essential CVS, Jennifer Vesperman. O'Reilly Media, Inc., Sebastopol, CA, USA, 2003. ISBN 0-596-00459-1.

Version Control With Subversion, Ben Collins-Sussman, Brian W. Fitzpatrick and C. Michael Pilato. O'Reilly Media, Inc., Sebastopol, CA, USA, 2004. ISBN 0-596-00448-6.

GNU Make: A Program for Directing Recompilation, Richard M. Stallman, Roland McGrath, and Paul D. Smith. The Free Software Foundation, Cambridge, MA, USA, 2004. ISBN 1-882114-83-3.

Managing Projects with GNU make, Third Edition, Robert Mecklenburg, Andy Oram, and Steve Talbott. O'Reilly Media, Inc., Sebastopol, CA, USA, 2005. ISBN 0-596-00610-1.

Debugging with GDB: The GNU Source-Level Debugger, Richard M. Stallman, Roland Pesch, Stan Shebs, et al. The Free Software Foundation, Cambridge, MA, USA, 2002. ISBN 1-882114-88-4.

The Cathedral and the Bazaar, Eric S. Raymond, O'Reilly Media, Inc., Sebastopol, CA, USA, 2001. ISBN 0-596-00131-2 (hardback), 0-596-00108-8 (paperback).

Emacs

GNU Emacs Manual, for Version 21, Fifteenth Edition, Richard M. Stallman. The Free Software Foundation, Cambridge, MA, USA, 2002. ISBN 1-882114-85-X.

An Introduction to Programming in Emacs Lisp, Revised Second Edition, Robert J. Chassell. The Free Software Foundation, Cambridge, MA, USA, 2004. ISBN 1-882114-56-6

GNU Emacs Lisp Reference Manual (in two volumes), Bil Lewis, Dan LaLiberte, Richard Stallman, and the GNU Manual Group. The Free Software Foundation, Cambridge, MA, USA, 2000. ISBN 1-882114-73-6. Out of print.

Learning GNU Emacs, Third Edition, Debra Cameron, James Elliott, and Marc Loy. O'Reilly Media, Inc., Sebastopol, CA, USA, 2005. ISBN 0-596-00648-9.

Writing GNU Emacs Extensions, Bob Glickstein. O'Reilly Media, Inc., Sebastopol, CA, USA, 1997. ISBN 1-56592-261-1.

GNU Emacs: UNIX Text Editing and Programming, Michael A. Schoonover, John S. Bowie, and William R. Arnold. Addison-Wesley, Reading, MA, USA, 1992. ISBN 0-201-56345-2.

Standards

There are a number of "official" standards for the behavior of portable applications among Unix and Unix-like systems. The first entry is the current POSIX standard. The rest are the formal standards for the C and C++ programming languages.

IEEE Standard 1003.1-2004: Standard for information Technology—Portable Operating System Interface (POSIX®). IEEE, New York, NY, USA, 2004.

This is the POSIX standard. It combines both the system call interface standard and the shell and utilities standard in one document. The standard consists of several volumes: Base Definitions (Volume 1), System Interfaces (Volume 2), Shell and Utilities (Volume 3), and Rationale (Volume 4).

The standard may be ordered from http://www.standards.ieee.org on CD-ROM (Product number SE95238, ISBN 0-7381-4049-X) or as PDF (Product number SS95238, ISBN 0-7381-4048-1).

X3 Secretariat: Standard—The C Language. X3J11/90-013. ISO Standard ISO/IEC 9899. Computer and Business Equipment Manufacturers Association. Washington DC, USA, 1990.

International Standard: Programming Languages—C. ISO Standard ISO/IEC 9899:1999(E). Information Technology Industry Council, Washington DC, USA, 1999.

These two documents are the 1990 and 1999 standards for the C language. It generally takes five or more years from when a language standard is published until compilers for that version become widely available.

X3 Secretariat: International Standard—The C++ Language. X3J16-14882. Information Technology Council (NSITC). Washington DC, USA, 1998.

This is the initial standard for the C++ programming language, used by most C++ compilers as of this writing.

International Standard: Programming Languages—C++. ISO Standard ISO/IEC 14882-2003. Information Technology Industry Council, Washington DC, USA, 2003.

A revision of the previous document.

O'Reilly Books

Here is a list of O'Reilly Media books cited throughout this book. There are, of course, many other O'Reilly books relating to Unix. See http://www.oreilly.com/catalog.

Advanced Perl Programming, Second Edition, Simon Cozens. O'Reilly Media, Inc., Sebastopol, CA, USA, 2005. ISBN 0-596-00456-7

Checking C Programs with lint, Ian F. Darwin. O'Reilly Media, Inc., Sebastopol, CA, USA, 1988. ISBN 0-937175-30-7.

Classic Shell Scripting, Arnold Robbins and Nelson H.F. Beebe. O'Reilly Media, Inc., Sebastopol, CA, USA, 2005. ISBN 0-596-00595-4.

Learning Perl, Third Edition, Randal L. Schwartz and Tom Phoenix. O'Reilly Media, Inc., Sebastopol, CA, USA, 2001. ISBN 0-596-00132-0.

Learning the bash Shell, Third Edition, Cameron Newham and Bill Rosenblatt. O'Reilly Media, Inc., Sebastopol, CA, USA, 2005. ISBN 0-596-00965-8.

Learning the Korn Shell, Second Edition, Bill Rosenblatt and Arnold Robbins. O'Reilly Media, Inc., Sebastopol, CA, USA, 2002. ISBN 0-596-00195-9.

Learning Python, Second Edition, Mark Lutz and David Ascher. O'Reilly Media, Inc., Sebastopol, CA, USA, 2003. ISBN: 0-596-00281-5.

Learning the Unix Operating System, Fifth Edition, Jerry Peek, Grace Todino, and John Strang. O'Reilly Media, Inc., Sebastopol, CA, USA, 2001. ISBN 0-596-00261-0.

Learning the vi Editor, Sixth Edition, Linda Lamb and Arnold Robbins. O'Reilly Media, Inc., Sebastopol, CA, USA, 1998. ISBN 1-56592-426-6.

lex & yacc, Second Edition, John Levine, Tony Mason, and Doug Brown. O'Reilly Media, Inc., Sebastopol, CA, USA, 1992. ISBN 1-56592-000-7.

Linux in a Nutshell, Fifth Edition, Ellen Siever, Aaron Weber, Stephen Figgins, Robert Love, and Arnold Robbins. O'Reilly Media, Inc., Sebastopol, CA, USA, 2005. ISBN 0-596-00482-6.

Mac OS X Panther in a Nutshell, Second Edition, Jason McIntosh, Chuck Toporek, and Chris Stone. O'Reilly Media, Inc., Sebastopol, CA, USA, 2004. ISBN 0-596-00606-3.

Mastering Regular Expressions, Second Edition, Jeffrey E. F. Friedl. O'Reilly Media, Inc., Sebastopol, CA, USA, 2002. ISBN 0-596-00289-0.

PGP: Pretty Good Privacy, Simson Garfinkel. O'Reilly Media, Inc., Sebastopol, CA, USA, 1994. ISBN 1-56592-098-8.

Programming Perl, Third Edition, Larry Wall, Tom Christiansen, and Jon Orwant. O'Reilly Media, Inc., Sebastopol, CA, USA, 2000. ISBN 0-596-00027-8.

Programming Python, Second Edition, Mark Lutz. O'Reilly Media, Inc., Sebastopol, CA, USA, 2001. ISBN: 0-596-00085-5.

sed & awk, Second Edition, Dale Dougherty and Arnold Robbins. O'Reilly Media, Inc., Sebastopol, CA, USA, 1997. ISBN 1-56592-225-5.

SSH, The Secure Shell, The Definitive Guide, Second Edition, Daniel J. Barrett, Richard E. Silverman, and Robert G. Byrnes. O'Reilly Media, Inc., Sebastopol, CA, USA, 2005. ISBN: 0-596-00895-3.

Using csh & tcsh, Paul DuBois. O'Reilly Media, Inc., Sebastopol, CA, USA, 1995. ISBN 1-56592-132-1.

Index

Symbols

"text mode" browser (lynx), Alphabetical Summary of GNU/Linux Commands

#define statements (C), generating template file of, Alphabetical Summary of Common Commands

$ENV file (read by Korn and Bash shells at startup), Special Files

& (ampersand)

&& (logical AND) operator, Examples, Built-in Mathematical Functions (ksh93 Only), Operators, Variable and Array Assignment

&= (assignment) operator, Built-in Mathematical Functions (ksh93 Only), Operators

background execution, Bash and ksh, Examples, Examples

background execution, tcsh, Examples

bitwise AND operator, Built-in Mathematical Functions (ksh93 Only), Operators

ex command, Alphabetical Summary of ex Commands

redirection symbol, Bash and ksh, Examples

redirection symbol, tcsh, Examples

replacement pattern metacharacter, Replacement Patterns

< > (angle brackets)

< > redirection operator, Bash and ksh, Examples, Redirection using file descriptors

* (asterisk)

** exponentiation operator, Built-in Mathematical Functions (ksh93 Only), Variable and Array Assignment

*= (assignment) operator, Built-in Mathematical Functions (ksh93 Only), Operators, Variable and Array Assignment

filename metacharacter, Bash and ksh, Examples

filename metacharacter, tcsh, Syntax, Examples

multiplication operator, Built-in Mathematical Functions (ksh93 Only), Operators, Variable and Array Assignment

Unix metacharacter, Metacharacters, Metacharacters, Listed by Unix Program

@ (at command)

ex, Alphabetical Summary of ex Commands

tcsh, Examples, Built-in Commands

@ (at sign)

array operator, Special Expressions

filename metacharacter, Bash and ksh, Examples

` (backquote)

command substitution in Bash and ksh, Examples

command substitution in tcsh, Examples

\ (backslash)

filename metacharacter, Examples

line continuation in makefile, Makefile Lines

quoting in Bash and ksh, Examples

quoting in tcsh, Examples

replacement pattern metacharacter, Replacement Patterns

search pattern metacharacter, Metacharacters, Metacharacters, Listed by Unix Program

/bin/sh (Bourne shell), Which Shell Do I Want?

{ } (braces)

groups of commands, Examples

ksh93 variable names containing . (dot), Built-in Shell Variables

search pattern metacharacters, Metacharacters

string expansion characters, tcsh, Examples

Unix metacharacter, Metacharacters, Listed by Unix Program

[ ] (brackets), Examples

enclosing array elements, Bash and ksh, Arrays

filename metacharacters, tcsh, Syntax, Examples

Unix metacharacters, Metacharacters, Metacharacters, Listed by Unix Program

[[ ]] command (Bash and ksh), Built-in Commands (Bash and Korn Shells)

[[.c.]] notation, specifying collating sequences, Examples

[[=c=]] notation, matching characters with same weight, Examples

^ (caret)

bitwise exclusive OR operator, Built-in Mathematical Functions (ksh93 Only), Operators

exponentiation operator, Variable and Array Assignment

filename metacharacter, tcsh, Syntax, Examples

quick substitution, tcsh, Examples

search pattern metacharacter, Metacharacters

Unix metacharacter, Metacharacters, Listed by Unix Program

^= (assignment) operator, Built-in Mathematical Functions (ksh93 Only), Operators, Variable and Array Assignment

[[:class:]] (character classes), Examples

: (colon)

ex commands, Command-Line Syntax, Syntax of ex Commands

null command, Bash and ksh, Built-in Commands (Bash and Korn Shells)

sed command, Multiline Input Processing

tcsh command, Built-in Commands

, (comma) operator, Built-in Mathematical Functions (ksh93 Only)

$ (dollar sign)

$" ", quoting in Bash and Korn shells, Examples

$' ', quoting in Bash and Korn shells, Examples

${ ... } syntax, referencing arrays, Arrays

built-in Bash and Korn shell variable names, Examples

field reference operator, Variable and Array Assignment

GDB convenience variable names, The Value History

GDB value history, The Value History

make utility macro names, Macro values

make utility, in command lines, Writing Command Lines

search pattern metacharacter, Metacharacters, Metacharacters, Listed by Unix Program

variable substitution in Bash and ksh, Examples

variable substitution in tcsh, Examples

. (dot)

Bash and ksh command, Built-in Commands (Bash and Korn Shells)

ksh93 variable names containing, Built-in Shell Variables

Unix metacharacter, Metacharacters, Metacharacters, Listed by Unix Program

= (equal sign)

= = equality operator, Built-in Mathematical Functions (ksh93 Only), File inquiry operators, Variable and Array Assignment

=~ string equality, tcsh, File inquiry operators

assignment operator, Built-in Mathematical Functions (ksh93 Only), Operators, Variable and Array Assignment

ex command, Alphabetical Summary of ex Commands

sed command, Multiline Input Processing

! (exclamation mark)

!= (inequality) operator, Built-in Mathematical Functions (ksh93 Only), File inquiry operators, Variable and Array Assignment

!~ regular expression nonmatch, awk, Variable and Array Assignment

!~ string inequality, tcsh, File inquiry operators

ex command, Alphabetical Summary of ex Commands

expanded to current command number in Korn shell, Discipline Functions (ksh93 Only)

filename metacharacter, Bash and ksh, Examples, Examples

history substitution, tcsh, Examples

negating pipeline, ksh and Bash, Built-in Commands (Bash and Korn Shells)

negation in sed, Pattern Addressing

NOT operator, Examples, Arithmetic Expressions, Operators

redirection symbol, tcsh, Examples

# (hash mark)

#! command, invoking named shell, Built-in Commands (Bash and Korn Shells)

#! command, invoking tcsh shell, Built-in Commands

comments

awk, #

Bash and ksh, Built-in Commands (Bash and Korn Shells)

sed, Alphabetical Summary of sed Commands

tcsh, Built-in Commands

- (hyphen)

- - (auto-decrement) operator, Arithmetic Expressions, Operators, Variable and Array Assignment

-= (assignment) operator, Built-in Mathematical Functions (ksh93 Only), Operators, Variable and Array Assignment

filename metacharacter, Bash and ksh, Examples

negation operator, Arithmetic Expressions

subtraction operator, Built-in Mathematical Functions (ksh93 Only), Operators, Variable and Array Assignment

tag names and (cvs), Alphabetical Summary of Commands

< (left angle bracket)

<& (file descriptor), Bash and ksh, Redirection using file descriptors

<< bitwise left shift operator, Built-in Mathematical Functions (ksh93 Only), Operators

<< redirection operator, Redirection using file descriptors, Command Forms

<<< redirection operator, Redirection using file descriptors

<<= (assignment) operator, Built-in Mathematical Functions (ksh93 Only)

<= (less than or equal to) operator, Built-in Mathematical Functions (ksh93 Only), File inquiry operators, Variable and Array Assignment

ex command, Alphabetical Summary of ex Commands

less than operator, Built-in Mathematical Functions (ksh93 Only), File inquiry operators, Variable and Array Assignment

redirection operator, Examples, Examples, Command Forms

() (parentheses)

command grouping, Bash and ksh, Examples, Examples

command grouping, tcsh, Examples

enclosing make utility macro names, Macro values

Unix metacharacter, Replacement Patterns, Metacharacters, Listed by Unix Program

% (percent)

%= (assignment) operator, Built-in Mathematical Functions (ksh93 Only), Operators, Variable and Array Assignment

modulus operator, Built-in Mathematical Functions (ksh93 Only), Operators, Variable and Array Assignment

pattern rules in makefile lines, Makefile Lines

replacement pattern metacharacter (ed), Metacharacters, Listed by Unix Program

| (pipe character)

Bash and ksh, Examples

bitwise OR operator, Built-in Mathematical Functions (ksh93 Only), Operators

redirecting command output, Examples, Command Forms

tcsh shell, Examples

Unix metacharacter, Replacement Patterns, Metacharacters, Listed by Unix Program

|& (execute coprocesses in ksh), Examples

|& (multiple redirection), Command Forms

|= (assignment) operator, Built-in Mathematical Functions (ksh93 Only), Operators

|| (logical OR) operator, Examples, Built-in Mathematical Functions (ksh93 Only), Operators, Variable and Array Assignment

+ (plus sign)

++ (auto-increment) operator, Arithmetic Expressions, Operators, Variable and Array Assignment

+= (assignment) operator, Built-in Mathematical Functions (ksh93 Only), Operators, Variable and Array Assignment

addition operator, Built-in Mathematical Functions (ksh93 Only), Operators, Variable and Array Assignment

filename metacharacter, Bash and ksh, Examples

unary operator, Arithmetic Expressions

Unix metacharacter, Replacement Patterns, Metacharacters, Listed by Unix Program

? (question mark)

?: (inline conditional evaluation), Built-in Mathematical Functions (ksh93 Only), Variable and Array Assignment

filename metacharacter, Bash and ksh, Examples

filename metacharacter, tcsh, Syntax, Examples

search pattern metacharacter, Replacement Patterns, Metacharacters, Listed by Unix Program

" " (quotation marks, double)

quoting in Bash and ksh, Examples

quoting in tcsh, Examples

' ' (quotation marks, single)

quoting in Bash and ksh, Examples

quoting in tcsh, Examples

"r" (remote) commands, Alphabetical Summary of Common Commands

> (right angle bracket)

>! redirection operator, Command Forms

>& (multiple redirection), Redirection using file descriptors, Command Forms

>&! (multiple redirection), Command Forms

>= (greater than or equal to) operator, Built-in Mathematical Functions (ksh93 Only), File inquiry operators, Variable and Array Assignment

>> bitwise right shift operator, Built-in Mathematical Functions (ksh93 Only), Operators

>> redirection operator, Examples, Command Forms

>>! redirection operator, Command Forms

>>& (multiple redirection), Command Forms

>>&! (multiple redirection), Command Forms

>>= (assignment) operator, Built-in Mathematical Functions (ksh93 Only)

>| redirection operator, Redirection using file descriptors

ex command, Alphabetical Summary of ex Commands

greater than operator, Built-in Mathematical Functions (ksh93 Only), File inquiry operators, Variable and Array Assignment

redirection operator, Examples, Examples, Command Forms

; (semicolon) command separator, Examples, Examples, Examples

/ (slash)

/= (assignment) operator, Built-in Mathematical Functions (ksh93 Only), Operators, Variable and Array Assignment

division operator, Built-in Mathematical Functions (ksh93 Only), Operators, Variable and Array Assignment

~ (tilde)

binary inversion operator, Operators

bitwise negation operator, Arithmetic Expressions

ex command, Alphabetical Summary of ex Commands

filename metacharacter, Bash and ksh, Examples

filename metacharacter, tcsh, Examples

home directories in Bash and ksh, Special Files

home directories in tcsh, Examples, Completion

home directory in CVS, Internal Variables in CVSROOT Files

regular expression match operator, Variable and Array Assignment

replacement pattern metacharacter, Metacharacters, Listed by Unix Program

_ (underscore), tag names and, Alphabetical Summary of Commands

. (dot) files, Dot Files

.#file.revision, Alphabetical Summary of Commands

.#filename.revision file, Dot Files

.cshdirs file (tcsh), Syntax

.cshrc file (tcsh), Syntax

.cvsignore file (CVS), Dot Files

.cvspass file (CVS), Environment Variables

.cvsrc file (CVS), Environment Variables

.cvswrappers file (CVS), Environment Variables

.exrc file (vi), Command-Line Syntax

.gdbinit file (GDB), Initialization Files

.history file (tcsh), Syntax

.inputrc file, Initialization Files

.login file (tcsh), Syntax

.logout file (tcsh), Syntax

.plan file, Alphabetical Summary of Common Commands

.profile file

shell variables, Bash and ksh, Other Shell Variables

.project file, Alphabetical Summary of Common Commands

.rhosts file, Environment Variables

.so requests, eliminating in nroff or troff files, Alphabetical Summary of Common Commands

.tcshrc file, Syntax

example, Environment Variables

/bin/ksh, The Bash and Korn Shells

/etc/bash_completion file, Examples

/etc/passwd file

Bash and ksh, Special Files

tcsh, Syntax

/etc/profile file, Special Files

/usr/lib/rpm/rpmrc file, The rpm Command

:set command (vi), vi Configuration

@include statements, gawk, Profiling

A

a command (sed), Multiline Input Processing

abbreviate command (ex), Options

abbreviations commands (Emacs), Search Commands

ABI (Application Binary Interface), Summary of set and show Commands

access mode for files, changing, Alphabetical Summary of Common Commands

access time for files, updating, Alphabetical Summary of Common Commands

aclocal command, Alphabetical Summary of Common Commands

actions, awk, Patterns and Procedures, Procedures

simple pattern-action examples, Simple Pattern-Action Examples

active processes, reports on, Alphabetical Summary of Solaris Commands

Ada programming language, compiling, Alphabetical Summary of Common Commands

add command

CVS, Alphabetical Summary of Commands

svn, svn Subcommands

add-symbol-file command (GDB), Alphabetical Summary of GDB Commands

addresses for ex commands, Syntax of ex Commands

addresses for sed commands, Pattern Addressing

admin command (CVS), Alphabetical Summary of Commands

advance command (GDB), Alphabetical Summary of GDB Commands

alias command

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

tcsh, #!

aliases (command)

removing, Built-in Commands (Bash and Korn Shells)

special, for tcsh commands, Special Aliases

aliasing variables, Examples

alloc command (tcsh), Built-in Commands

alnum character class, Examples

alpha character class, Examples

Alt key (Emacs commands), Buffer and Window

and function (gawk), Alphabetical Summary of awk Functions and Commands

AND operator

& (bitwise AND), Built-in Mathematical Functions (ksh93 Only), Operators

&& (logical AND), Examples, Built-in Mathematical Functions (ksh93 Only), Operators

annotate command (CVS), Alphabetical Summary of Commands

annotation processing tool (apt), Alphabetical Summary of Java Commands

ANSI/VT100 terminal emulation, enabling (screen), Alphabetical Summary of Common Commands

Apache 2.0 httpd web server, use with Subversion, Other Subversion Components

append command (ex), Options

appending to files, Alphabetical Summary of Common Commands

appletviewer Java command, Alphabetical Summary of Java Commands

Application Binary Interface (ABI), cp-abi

application defaults on Mac OS X, Alphabetical Summary of Mac OS X Commands

apply Mac OS command, Alphabetical Summary of Mac OS X Commands

apropos command

GDB, Alphabetical Summary of GDB Commands

Unix, Alphabetical Summary of Common Commands

APT (Advanced Package Tool), Linux Package Management

apt Java command, Alphabetical Summary of Java Commands

apt- commands, options, Debian Package Manager Command Summary

apt-cache command, Debian Package Manager Command Summary

apt-cdrom command, Debian Package Manager Command Summary

apt-config command, Debian Package Manager Command Summary

apt-extracttemplates command, Debian Package Manager Command Summary

apt-ftparchive command, Debian Package Manager Command Summary

apt-get command, Linux Package Management, Debian Package Manager Command Summary

apt-sortpkgs command, Debian Package Manager Command Summary

aptitude command, Linux Package Management, Debian Package Manager Command Summary

ar command, Alphabetical Summary of Common Commands

arbitrary-precision arithmetic, performing with bc, Alphabetical Summary of Common Commands

Arch (source code management system), Other Source Code Management Systems

archives

copying, Alphabetical Summary of Common Commands

disassembling, Alphabetical Summary of Solaris Commands

Java

adding digital signature, Alphabetical Summary of Java Commands

jar command, Alphabetical Summary of Java Commands

maintenance (ar), Alphabetical Summary of Common Commands

Portable Archive Exchange (pax), Alphabetical Summary of Common Commands

removing information from (strip), Alphabetical Summary of Common Commands

shell archive, producing, Alphabetical Summary of Mac OS X Commands

tar (tape archive), Alphabetical Summary of Common Commands

zip command, Alphabetical Summary of Common Commands

ZIP format, printing information about, Alphabetical Summary of Common Commands

args command (ex), Alphabetical Summary of ex Commands

arguments

Bash and Korn shells, Syntax

tcsh shell, Syntax

arithmetic expressions

Bash and ksh, Arithmetic Expressions

tcsh shell, Operators

arithmetic operators

awk, Operators, Group Listing of awk Functions and Commands

Bash and ksh, Arithmetic Expressions

tcsh, Expressions

array constants, Special Expressions

array operator (@), Special Expressions

arrays

Bash and Korn shells, Arrays

in awk, Variable and Array Assignment

tcsh shell, Predefined Shell Variables

arrow keys, navigating ksh command history, Command Substitution

as command, Alphabetical Summary of Common Commands

asort function (gawk), Alphabetical Summary of awk Functions and Commands

asorti function (gawk), Alphabetical Summary of awk Functions and Commands

aspell command, Alphabetical Summary of Common Commands, Alphabetical Summary of GNU/Linux Commands

assembly language processing

as command, Alphabetical Summary of Common Commands

cc command, Alphabetical Summary of Common Commands

assignment operators

awk, Operators

Bash and ksh, Built-in Mathematical Functions (ksh93 Only)

tcsh, Expressions

associative arrays, Arrays

awk, Operators

at (@) command (ex), Alphabetical Summary of ex Commands

at command, Alphabetical Summary of Common Commands

AT&T Research, ksh93, Differing Features

atan2 function (awk), Alphabetical Summary of awk Functions and Commands

atomic commits, Building a Better CVS

atq command, Alphabetical Summary of Common Commands

atrm command, Alphabetical Summary of Common Commands

attach command (GDB), Alphabetical Summary of GDB Commands

authentication agent

adding RSA or DSA identities, Alphabetical Summary of Common Commands

allowing/disabling forwarding of connection, Alphabetical Summary of Common Commands

ssh-agent command, Alphabetical Summary of Common Commands

authentication keys, generating for ssh, Alphabetical Summary of Common Commands

author command (svnlook), svnlook Subcommands

autoconf command, Alphabetical Summary of Common Commands

aclocal command and, Alphabetical Summary of Common Commands

autoheader, autoheader

Autoconf software suite, Building Software

autoheader command, Alphabetical Summary of Common Commands

autoload command (ksh), Built-in Commands (Bash and Korn Shells)

automake command, Alphabetical Summary of Common Commands

awatch command (GDB), Alphabetical Summary of GDB Commands

awk command, Alphabetical Summary of Common Commands

awk programming language, Conceptual Overview

actions, Patterns

command-line syntax, Command-Line Syntax

features, Conceptual Overview

functions and commands, alphabetical summary, Group Listing of awk Functions and Commands

functions and commands, group listing, Group Listing of awk Functions and Commands

gawk command, Alphabetical Summary of GNU/Linux Commands

implementation limits, Implementation Limits

nawk command, Alphabetical Summary of Common Commands, Alphabetical Summary of Solaris Commands

new and old versions, Conceptual Overview

operators, Operators

pattern-action examples, Simple Pattern-Action Examples

patterns, Patterns

patterns and actions, Patterns and Procedures

printf formats, printf Formats

redirections, printf Formats

source code for four versions and GNU gettext, Source Code

user-defined functions, Escape Sequences

variable and array assignment, Variable and Array Assignment

escape sequences, Escape Sequences

variables, built-in, Simple Pattern-Action Examples

B

b command (sed), Alphabetical Summary of sed Commands

background processes, waiting for completion of, Alphabetical Summary of Common Commands

backtrace command (GDB), Alphabetical Summary of GDB Commands

banner command, Alphabetical Summary of Common Commands

basename command, Alphabetical Summary of Common Commands

Bash (Bourne-Again shell), Which Shell Do I Want?

arithmetic expressions, Arithmetic Expressions

bash command, Alphabetical Summary of Common Commands

command execution, Job Control

command history, Command History

line-edit mode, Line-Edit Mode

programmable completion, Examples

command syntax, Examples

commands, built-in, Built-in Commands (Bash and Korn Shells)

features differing from ksh and tcsh, Differing Features

features in common with ksh and C shells, Shell Source Code URLs

filename metacharacters, Special Files

functions, Functions

history of, Differing Features

invoking, Invoking the Shell

arguments, Arguments

as sh, Invoking the Shell

common options, Invoking the Shell

options unique to Bash, Arguments

job control, Job Control

overview of features, Overview of Features

quoting, Examples

characters used for, Examples

redirection syntax, Examples

setting restrictions on, Restricted Shells

syntax, Arguments

special files, Special Files

variables, Variables

arrays, Arrays

built-in, Examples

other shell variables, Other Shell Variables

special prompt settings, Discipline Functions (ksh93 Only)

variable substitution, Variable Substitution

version 3, The Bash and Korn Shells

batch command, Alphabetical Summary of Common Commands

batch execution

at specified date/time, Alphabetical Summary of Common Commands

printing queued jobs, Alphabetical Summary of Common Commands

removing queued jobs, Alphabetical Summary of Common Commands

bc command, Alphabetical Summary of Common Commands

bdelete command (ex), Alphabetical Summary of ex Commands

bg command

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

tcsh shell, Built-in Commands

biff command, Alphabetical Summary of Common Commands

bind command (Bash), Built-in Commands (Bash and Korn Shells)

bindkey command (tcsh), Built-in Commands

bindtextdomain function (gawk), Alphabetical Summary of awk Functions and Commands

bison command, Alphabetical Summary of Common Commands

bitwise operators (tcsh), Operators

blame command (svn), svn Subcommands

blank character class, Examples

blank lines in makefiles, Makefile Lines

block size (characters), Alphabetical Summary of Common Commands

bootstrapping problem with Subversion, Source Code

Bourne family of shells, Searching

Bourne shell, Shell Flavors

history of, Differing Features

branch, Introduction and Terminology, Basic Version Control Operations

branching and tagging improvements, Subversion, Building a Better CVS

branching commands (sed), Basic Editing

break command

awk, #

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

GDB, break

tcsh, Built-in Commands

breakpoints, Conceptual Overview

breaksw command (tcsh), Built-in Commands

BSD (Berkeley Software Distribution), Unix in the 21st Century

"r" commands, Alphabetical Summary of Common Commands

printing commands, Miscellaneous

BSD Compatibility Package (Solaris), Unix in the 21st Century

bt (backtrace) command (GDB), Group Listing of GDB Commands

buffer command (ex), Alphabetical Summary of ex Commands

buffer-manipulation commands (Emacs), Window Commands

buffers (Emacs), Buffer and Window

buffers command (ex), Alphabetical Summary of ex Commands

build process for software, Building Software

built-in shell variables

Bash and ksh, Examples

tcsh, Predefined Shell Variables

sample .tcshrc file, Sample .tcshrc File

built-ins command (tcsh), Built-in Commands

builtin command

Bash, builtin

ksh, Built-in Commands (Bash and Korn Shells)

bundling commands, Alphabetical Summary of Common Commands

byacc Linux command, Alphabetical Summary of Common Commands

bye command (tcsh), Built-in Commands

bzip2 command, Alphabetical Summary of Common Commands

C

c (continue) command (GDB), Group Listing of GDB Commands

C and C++ languages

call-graph profile data, gprof

compilers, Obtaining Compilers

compiling source files, Alphabetical Summary of Common Commands

compiling with gcc, Alphabetical Summary of Common Commands

extracting messages from, Alphabetical Summary of Common Commands

lexical analysis program for C statements, Alphabetical Summary of Common Commands

c command (sed), Alphabetical Summary of sed Commands

C shells, Searching

features in common with Korn and Bash shells, Shell Source Code URLs

tcsh, tcsh

c, d, and y editing operators (vi), Review of vi Operations, Edit Commands

cal command, Alphabetical Summary of Common Commands

calculator commands

bc command, Alphabetical Summary of Common Commands

dc command, Alphabetical Summary of Common Commands

Caldera package manager, The Red Hat Package Manager

calendar command, Alphabetical Summary of Common Commands

calendars, Alphabetical Summary of Common Commands

call command (GDB), Alphabetical Summary of GDB Commands

call-graph profile data, C programs, Alphabetical Summary of Common Commands

caller command (Bash), Built-in Commands (Bash and Korn Shells)

cancel command, Alphabetical Summary of Common Commands

canceling commands (Emacs), Paragraphs and Regions

capitalization commands (Emacs), Search Commands

case command

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

tcsh, Built-in Commands

case-sensitivity

Mac OS X filesystem and, Obtaining Compilers

setting for GDB, Summary of set and show Commands

cat command, Alphabetical Summary of Common Commands

svn, blame

svnlook, svnlook Options

catch command (GDB), Alphabetical Summary of GDB Commands

catchpoints, Conceptual Overview

cc command, Alphabetical Summary of Common Commands

cd command, Alphabetical Summary of Common Commands

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

ex, Alphabetical Summary of ex Commands

GDB, cd

tcsh, Built-in Commands

CD-ROM, ejecting, Alphabetical Summary of Common Commands

cdda2wav Linux command, Alphabetical Summary of GNU/Linux Commands

CDE (Common Desktop Environment), Alphabetical Summary of Solaris Commands

cdparanoia Linux command, Alphabetical Summary of GNU/Linux Commands

cdrdao Linux command, Alphabetical Summary of GNU/Linux Commands

cdrecord Linux command, Alphabetical Summary of GNU/Linux Commands

cdrw Solaris command, Alphabetical Summary of Solaris Commands

center command (ex), Alphabetical Summary of ex Commands

centering commands (Emacs), Indentation Commands

certificate management utility (keytool), Alphabetical Summary of Java Commands

change command (ex), Alphabetical Summary of ex Commands

changed command (svnlook), svnlook Subcommands

changing directory, Alphabetical Summary of Common Commands

channels, up2date: Red Hat Update Agent

character classes

listed, Replacement Patterns

matching in Bash and Korn shells, Examples

character sets

ASCII, ISO 8859-1 (Latin-1) Character Set

converting, Alphabetical Summary of Common Commands

ISO 8859-1 (Latin-1), ISO 8859-1 (Latin-1) Character Set

characters

buffer block size, Alphabetical Summary of Common Commands

converting DOS to ISO, Alphabetical Summary of Common Commands

converting ISO to DOS, Alphabetical Summary of Common Commands

counting in files, Alphabetical Summary of Common Commands

chdir command (tcsh), Built-in Commands

check-update command (yum), Yum Command Summary

checking in files, Introduction and Terminology

CVS, Conceptual Overview, commit

RCS, Overview of Commands, Standard Options and Environment Variables

Subversion, Basic Version Control Operations

checking out files, Introduction and Terminology

CVS, Conceptual Overview, Options

from Subversion, Building a Better CVS

RCS, Overview of Commands, Alphabetical Summary of Commands

checkout command

CVS, Options

RCS, Alphabetical Summary of Commands

svn, checkout

checksums

MD5, computing or checking, Alphabetical Summary of GNU/Linux Commands

SHA1, computing or checking, Alphabetical Summary of GNU/Linux Commands

chflags Mac OS command, Alphabetical Summary of Mac OS X Commands

chfn Mac OS command, Alphabetical Summary of Mac OS X Commands

chgrp command, Alphabetical Summary of Common Commands

chkey Solaris command, Alphabetical Summary of Solaris Commands

chmod command, Alphabetical Summary of Common Commands

chown command, Alphabetical Summary of Common Commands

chpass Mac OS command, Alphabetical Summary of Mac OS X Commands

chsh Mac OS command, Alphabetical Summary of Mac OS X Commands

ci command (RCS), Basic Operation, Alphabetical Summary of Commands

cksum command, Alphabetical Summary of Common Commands

class files (Java), disassembling, Alphabetical Summary of Java Commands

classifying files by data type, Alphabetical Summary of Common Commands

clean command (yum), Yum Command Summary

cleanup command (svn), svn Subcommands

clear command, Alphabetical Summary of Common Commands

GDB, cd

clearing the screen, Alphabetical Summary of Common Commands

client environment variables (CVS), Environment Variables

client/server networking, source code management, Usage Models

close command (ex), Alphabetical Summary of ex Commands

close function (awk), Alphabetical Summary of awk Functions and Commands

cmp command, Alphabetical Summary of Common Commands

cntrl character class, Examples

co command (RCS), Basic Operation, Alphabetical Summary of Commands

Codeville (version control system), Other Source Code Management Systems

collating sequences, specified by [[.c.]], Examples

columns

merging file lines into, Alphabetical Summary of Common Commands

selecting from files, Alphabetical Summary of Common Commands

combining files, Alphabetical Summary of Common Commands

comm command, Alphabetical Summary of Common Commands

command command, Built-in Commands (Bash and Korn Shells)

command history

GDB, height

ksh and Bash shells, Line-Edit Mode

line-edit mode, Line-Edit Mode

tcsh shell, Command Substitution

command line

invoking nroff/troff, Overview of nroff/troff

manipulation in Bash and ksh, Line-Edit Mode

manipulation in tcsh, Completion

command line macros (make), overriding, Overriding command-line macros

command lines (makefile), Special Dependencies

writing, Writing Command Lines

command mode (telnet), Alphabetical Summary of Common Commands

command mode (vi), Review of vi Operations

command substitution

Bash and ksh, Examples, Examples, Arithmetic Expressions

tcsh, Command History

examples, Word Substitution

command-line editor

Bash and ksh, Line-Edit Mode

tcsh, Command-Line Manipulation

command-line interface (CLI), GDB, Conceptual Overview

commands

aliases for, Built-in Commands (Bash and Korn Shells), Built-in Commands

awk

alphabetical summary, Group Listing of awk Functions and Commands

group listing, Group Listing of awk Functions and Commands

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

forms of, Examples

job control, Job Control

basic, listing of, Beginner's Guide

bundled arguments, Alphabetical Summary of Common Commands

covered in the quick reference, What's in the Quick Reference

CVS, Alphabetical Summary of Commands

Debian Package Manager, Debian Package Manager Command Summary

descriptions of, displaying, Alphabetical Summary of Common Commands

Emacs editor

Control and Meta keys, Buffer and Window

essential, listing of, Absolutely Essential Commands

listed by category, File-Handling Commands

listed by key, Control-Key Sequences

listed by name, Meta-Key Sequences

ex editor, Options

executing

after logout, Alphabetical Summary of Common Commands, nohup, Built-in Commands

Bash and Korn shells, Job Control

wait between, Alphabetical Summary of Common Commands

GDB

alphabetical summary, Alphabetical Summary of GDB Commands

set and show commands, Text User Interface Commands

summarized by category, Group Listing of GDB Commands

GNU/Linux, alphabetical summary, Alphabetical Summary of GNU/Linux Commands

Java, summary of, Alphabetical Summary of Java Commands

lower priority, executing, Alphabetical Summary of Common Commands

Mac OS X, summary of, Alphabetical Summary of Mac OS X Commands

RCS, Standard Options and Environment Variables

overview, Overview of Commands

running repeatedly (watch), Alphabetical Summary of GNU/Linux Commands

sed editor

alphabetical listing, Multiline Input Processing

by category, Basic Editing

syntax, Pattern Addressing

Solaris

alphabetical summary, Alphabetical Summary of Solaris Commands

compliant with POSIX standard, System Status

package management, Solaris Package Management Command Summary

Solaris 10 installs, Solaris

Subversion

svn subcommands, svn Subcommands

svnadmin, svnadmin Subcommands

svnlook, svnlook Options

tcsh shell, Built-in Commands

job control, Job Control

type, showing, Built-in Commands (Bash and Korn Shells)

Unix, summary of common, Finding Commands on GNU/Linux and Mac OS X

vi editor, Movement Commands

status line, Status-Line Commands

syntax, Review of vi Operations

yum, check-update

commands command (GDB), Alphabetical Summary of GDB Commands

comments

awk, #

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

makefiles, Options

nroff/troff, Outline of Useful Requests

sed editor, Multiline Input Processing

tcsh shell, Built-in Commands

commit command

CVS, commit

svn, cleanup

commits, atomic, Building a Better CVS

committing changes, Building a Better CVS

Common Desktop Environment (CDE), Common Desktop Environment

common synonyms (CVS subcommands), Alphabetical Summary of Commands

communication commands, Beginner's Guide

Compact Disc audio files, reading as WAV, AIFF, AIFF-C, or raw format files, Alphabetical Summary of GNU/Linux Commands

Compact Disc Digital Audio (CDDA), converting to WAV, Alphabetical Summary of GNU/Linux Commands

comparison commands, Beginner's Guide

cmp, cmp

comm, cmp

diff, diff, diff

svn, diff

svnlook, Example

diff3, diff3

dircmp, dircmp

RCS, Overview of Commands

rcsdiff, rcsdiff

rdiff, Alphabetical Summary of Commands

sdiff, sdiff

vimdiff, vimdiff

comparison operators

awk, Operators

Bash and ksh, Built-in Mathematical Functions (ksh93 Only)

tcsh, File inquiry operators

compgen command (Bash), Built-in Commands (Bash and Korn Shells)

compilers, Obtaining Compilers

bc, bc

gcc, g++

javac, javac

rmic (Java), Alphabetical Summary of Java Commands

compiling C source files, Alphabetical Summary of Common Commands

compl function (gawk), Alphabetical Summary of awk Functions and Commands

complete command

Bash, compgen

GDB, cd

tcsh, Built-in Commands

completion facilities

Bash, The fc and hist Commands, compgen

tcsh shell, Completion

compression

commands for Zip files, Alphabetical Summary of Common Commands

gunzip command, Alphabetical Summary of Common Commands

gzip command, Alphabetical Summary of Common Commands

uncompressing files with zcat, Alphabetical Summary of Common Commands

unzip command, Alphabetical Summary of Common Commands

zip command, Alphabetical Summary of Common Commands

condition command (GDB), Alphabetical Summary of GDB Commands

conditional statements (makefile), Makefile Lines, Conditional Input

configuration

autoconf command, Alphabetical Summary of Common Commands

RCS commands for, Basic Operation

configuration files

rpm command, The rpm Command

vi, Conceptual Overview

configuration variables, system, Alphabetical Summary of Common Commands

configure shell script, Building Software

conflicts, source code changes, Usage Models, Building a Better CVS

resolution methods in CVS, CVS Wrappers

cont (continue) command (GDB), Group Listing of GDB Commands

continue command

awk, exit

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

GDB, define

tcsh, Built-in Commands

control assignments (terminal), Alphabetical Summary of Common Commands

control modes (terminal), Alphabetical Summary of Common Commands

Control-key commands (Emacs), Buffer and Window, Control-Key Sequences

convenience variables, Convenience Variables and Machine Registers, convenience

conversation between users, Alphabetical Summary of Common Commands

converting

character sets, Alphabetical Summary of Common Commands

characters

DOS to ISO, Alphabetical Summary of Common Commands

ISO to DOS, Alphabetical Summary of Common Commands

spaces to tabs, Alphabetical Summary of Common Commands

tabs to spaces, Alphabetical Summary of Common Commands

files into tables, Alphabetical Summary of Common Commands

number units, Alphabetical Summary of Common Commands

Coordinated Universal Time (UTC), Specifying the Date

coprocesses

gawk, Gawk-Specific Features

Korn shell, Coprocesses

copy command

ex, Alphabetical Summary of ex Commands

svn, Examples

copy, modify, merge model

CVS, The Concurrent Versions System

Subversion, Basic Version Control Operations

version control systems, Usage Models

copying

file archives, cpio

files

remotely, Alphabetical Summary of Common Commands

hotcopy command, svnadmin, svnadmin Subcommands

standard input, tee

core file, Conceptual Overview

core images, creating, Alphabetical Summary of Common Commands

core-file command (GDB), Alphabetical Summary of GDB Commands

cos function (awk), Alphabetical Summary of awk Functions and Commands

cp command, Alphabetical Summary of Common Commands

cpio command, Alphabetical Summary of Common Commands

CRCs (cyclic redundancy checks), Alphabetical Summary of Common Commands

create command (svnadmin), svnadmin Subcommands

crontab command, Alphabetical Summary of Common Commands

csh (C shell), Alphabetical Summary of Common Commands, Which Shell Do I Want?, Differing Features

csh.login file (tcsh), Syntax

csh.logout file (tcsh), Syntax

csplit command, Alphabetical Summary of Common Commands

CSSC (source code management system), Other Source Code Management Systems

ctags command, Alphabetical Summary of Common Commands

CTRL-Z command

Bash and ksh, Job Control

tcsh, Built-in Commands

CUPS (Common Unix Printing System)

cancel command, Alphabetical Summary of Common Commands

lp command, Alphabetical Summary of Common Commands

lpq command, Alphabetical Summary of Common Commands

lpr command, Alphabetical Summary of Common Commands

lprm command, Alphabetical Summary of Common Commands

lpstat command, Alphabetical Summary of Common Commands

curl command, Building Software, Alphabetical Summary of Common Commands

current date/time, Alphabetical Summary of Common Commands

current system name, Alphabetical Summary of Common Commands

cursor-movement commands (Emacs), File-Handling Commands

cut and paste

Emacs, Modes

sed editor, Basic Editing

vi editor, Copying and moving

cut command, Alphabetical Summary of Common Commands

CVS (Concurrent Versions System), Unix Source Code Management Systems, Conceptual Overview

command-line syntax and options, Command-Line Syntax and Options

common subcommand options, Common Subcommand Options

commands, alphabetical summary, Alphabetical Summary of Commands

commands, quick start guide, CVS Wrappers

copy, modify, merge model, Usage Models, Conceptual Overview

CVSROOT variables, CVSROOT Variables

environment variables, Environment Variables in CVSROOT Files

internal variables, Internal Variables in CVSROOT Files

shell variables in files, Internal Variables in CVSROOT Files

dates, Dates

legal date keywords, RFC 822 and RFC 1123

dot files, Dot Files

environment variables, Environment Variables

client, Dot Files

server, Client Environment Variables

keywords and keyword modes, Keywords and Keyword Modes

stickiness, CVS Wrappers

time zones, Time Zones

wrappers, CVS Wrappers

cyclic redundancy checks (CRCs), Alphabetical Summary of Common Commands

D

d (delete) command

ex, Alphabetical Summary of ex Commands

GDB, The GDB Text User Interface

sed, Alphabetical Summary of sed Commands

D command (sed), Alphabetical Summary of sed Commands

d editing operator (vi), Review of vi Operations, Edit Commands

DAO (disk-at-once) mode, Alphabetical Summary of GNU/Linux Commands

data classification of files, Alphabetical Summary of Common Commands

dates and times

access time and modification timestamp, touch

at command, Alphabetical Summary of Common Commands

calendars, Alphabetical Summary of Common Commands

crontab command, Alphabetical Summary of Common Commands

CVS dates, Dates

CVS time zones, Time Zones

date command, Alphabetical Summary of Common Commands

date command (svnlook), svnlook Subcommands

leave command, Alphabetical Summary of Mac OS X Commands

sleep command, Alphabetical Summary of Common Commands

specifying on RCS check-ins, Revision Numbering

time command, Alphabetical Summary of Common Commands, Built-in Commands (Bash and Korn Shells), Built-in Commands

timex command, system usage information, Alphabetical Summary of Solaris Commands

uptime command, Alphabetical Summary of Common Commands

dc command, Alphabetical Summary of Common Commands

dcgettext function (gawk), Alphabetical Summary of awk Functions and Commands

dcngettext function (gawk), Alphabetical Summary of awk Functions and Commands

dd command, Alphabetical Summary of Common Commands

ddd (Data Display Debugger), Source Code Locations

Debian Package Manager, Linux Package Management, The Debian Package Manager

command summary, Debian Package Manager Command Summary

files, Files

package flags, Package Flags

package names, Linux Package Management

package priorities, Package Priorities

package/selection states, Package and Selection States

shell and Perl scripts, Scripts

tools, listed, The Debian Package Manager

debugger, defined, Conceptual Overview

debugging tools

gprof, gprof

jdb (Java debugger), Alphabetical Summary of Java Commands

ltrace Linux command, Alphabetical Summary of GNU/Linux Commands

patch command, Alphabetical Summary of Common Commands

strace Linux command, Alphabetical Summary of GNU/Linux Commands

declare command (Bash), Built-in Commands (Bash and Korn Shells)

decrypt Solaris command, Alphabetical Summary of Solaris Commands

default command (tcsh), Built-in Commands

defaults Mac OS command, Alphabetical Summary of Mac OS X Commands

define command (GDB), Alphabetical Summary of GDB Commands

delete command

awk, exit

ex, Alphabetical Summary of ex Commands

GDB, Hooks

svn, Examples

deleting directories, Alphabetical Summary of Common Commands

deletion commands (Emacs), Paragraphs and Regions

deltify command (svnadmin), svnadmin Subcommands

demangling names, Conceptual Overview, Summary of set and show Commands

dependencies, Linux Package Management

GNU make, Command-Line Syntax, Special Dependencies

listing dynamic (ldd command), Alphabetical Summary of Common Commands

dependency lines (makefile), Makefile Lines

desk calculator program (dc), Alphabetical Summary of Common Commands

Desktop Korn shell, Shell Flavors

detach command (GDB), Alphabetical Summary of GDB Commands

Developer Tools, Mac OS X, Alphabetical Summary of Mac OS X Commands

development branch, Building a Better CVS

development tools, Mac OS X, Solaris

df command, Alphabetical Summary of Common Commands

dgettext function, Alphabetical Summary of Common Commands

diff command, Alphabetical Summary of Common Commands

CVS, commit

svn, diff

svnlook, Example

diff3 command, Alphabetical Summary of Common Commands

dig command, Alphabetical Summary of Common Commands

digest Solaris command, Alphabetical Summary of Solaris Commands

digit character class, Examples

digital signature, adding to a .jar file, Alphabetical Summary of Java Commands

dir command

GDB, The GDB Text User Interface

Linux, Alphabetical Summary of GNU/Linux Commands

dircmp Solaris command, Alphabetical Summary of Solaris Commands

dircolors Linux command, Alphabetical Summary of GNU/Linux Commands

directories

changing, Alphabetical Summary of Common Commands

comparing contents with dircmp, Alphabetical Summary of Solaris Commands

copying with ditto, Alphabetical Summary of Mac OS X Commands

creating, Alphabetical Summary of Common Commands

deleting, Mac OS X Options

listing contents of (dir), Alphabetical Summary of GNU/Linux Commands

moving or renaming, Alphabetical Summary of Common Commands

navigating, Built-in Commands (Bash and Korn Shells), Built-in Commands

printing full pathname of current, Alphabetical Summary of Common Commands

printing names of, Alphabetical Summary of Common Commands

Solaris commands, Finding Commands on Solaris

synchronizing between different computer systems, Alphabetical Summary of Common Commands, Alphabetical Summary of Solaris Commands

directory command (GDB), Alphabetical Summary of GDB Commands

directory versioning, Building a Better CVS

dirname command, Alphabetical Summary of Common Commands

dirs command

Bash, dirs

tcsh, Built-in Commands

dirs-changed command (svnlook), svnlook Subcommands

dis (disable) command (GDB), Group Listing of GDB Commands

dis Solaris command, Alphabetical Summary of Solaris Commands

disable command (GDB), Alphabetical Summary of GDB Commands

disassemble command (GDB), Alphabetical Summary of GDB Commands

disassembling Java class files, Alphabetical Summary of Java Commands

disassembling object files, Alphabetical Summary of Solaris Commands

discipline functions (ksh93), Discipline Functions (ksh93 Only)

disk-at-once (DAO) mode, cdrdao

disks

copying archive files, Alphabetical Summary of Common Commands

ejecting, Alphabetical Summary of Common Commands

formatting, Alphabetical Summary of Common Commands

free space, reporting on (df), Alphabetical Summary of Common Commands

usage information (du), Alphabetical Summary of Common Commands

disown command (Bash), Built-in Commands (Bash and Korn Shells)

disown command (ksh93), Built-in Commands (Bash and Korn Shells)

display command (GDB), Alphabetical Summary of GDB Commands

ditroff program, Introduction

ditto Mac OS command, Alphabetical Summary of Mac OS X Commands

DNS (Domain Name Service), querying servers with dig, Alphabetical Summary of Common Commands

do (shell keyword), Built-in Commands (Bash and Korn Shells)

do command

awk, exit

GDB, The GDB Text User Interface

DocBook/XML file, converting to formatted file, Alphabetical Summary of GNU/Linux Commands

document command (GDB), Alphabetical Summary of GDB Commands

documentation

accessing with info command, Alphabetical Summary of Common Commands

Java language, Options

looking up commands in manpages with whatis, Alphabetical Summary of Common Commands

done (shell keyword), Built-in Commands (Bash and Korn Shells)

dont-repeat command (GDB), Alphabetical Summary of GDB Commands

dos2unix command, Alphabetical Summary of Common Commands

dot (.) files, Dot Files

down command (GDB), Alphabetical Summary of GDB Commands

down-silently command (GDB), Alphabetical Summary of GDB Commands

dpkg command, Linux Package Management, Debian Package Manager Command Summary

actions, Options

actions, dpkg-deb, Debian Package Manager Command Summary

options, Options

query actions, Debian Package Manager Command Summary

dpkg-deb command, The Red Hat Package Manager, Debian Package Manager Command Summary

dpkg-query command, Debian Package Manager Command Summary

dpkg-split command, Debian Package Manager Command Summary

DSA identities, adding to authentication agent, Alphabetical Summary of Common Commands

dselect command, The Red Hat Package Manager, Debian Package Manager Command Summary

du command, Alphabetical Summary of Common Commands

dump command (svnadmin), svnadmin Subcommands

dumps, octal, Alphabetical Summary of Common Commands

dvdrecord Linux command, Alphabetical Summary of GNU/Linux Commands

dynamic dependencies, listing (ldd), Alphabetical Summary of Common Commands

E

e (edit) command (GDB), Group Listing of GDB Commands

e command (sed), Alphabetical Summary of sed Commands

echo command, Alphabetical Summary of Common Commands

Bash, Options

GDB, echo

Korn shell, echo

tcsh, Built-in Commands

echotc command (tcsh), Built-in Commands

ed text editor, Alphabetical Summary of Common Commands

edit command

CVS, Example

ex, Alphabetical Summary of ex Commands

GDB, echo

editing, keyboard shortcuts for, Line-Edit Mode

editors

stream (sed), Alphabetical Summary of Common Commands

tcsh command-line editor, Completion

text

Emacs, The Emacs Editor

ex, ex Basics

vi, vi, The vi, ex, and vim Editors

editors command (CVS), Alphabetical Summary of Commands

egrep command, Alphabetical Summary of Common Commands

pattern-matching metacharacters, Metacharacters, Listed by Unix Program

quoting regular expressions, Examples of Searching

eject command, Alphabetical Summary of Common Commands

ellipsis tcsh shell variable, Predefined Shell Variables

else (shell keyword), Built-in Commands (Bash and Korn Shells), Built-in Commands

else command (GDB), Alphabetical Summary of GDB Commands

elvis text editor, Conceptual Overview

emacs command, Alphabetical Summary of Common Commands

Emacs editor, Conceptual Overview

Bash and ksh command-line editing mode, Line-Edit Mode

bindings, compared to vi bindings, Completion

buffer and window, Buffer and Window

command-line syntax, Absolutely Essential Commands

commands

essential, listing of, Absolutely Essential Commands

summary by category, File-Handling Commands

summary by key, Control-Key Sequences

summary by name, Meta-Key Sequences

keys and keystrokes for commands, Buffer and Window

kill and yank, Buffer and Window

modes, Modes

point and mark, Point and Mark

tcsh command-line editing mode, Emacs mode

email messages

automatic replies to, Alphabetical Summary of Solaris Commands

mail notification, biff

reading and sending, Alphabetical Summary of Common Commands

enable command

Bash, enable

GDB, echo

encoded files, recreating original file, Alphabetical Summary of Common Commands

encrypt Solaris command, Alphabetical Summary of Solaris Commands

end (tcsh reserved word), Built-in Commands

end command (GDB), Alphabetical Summary of GDB Commands

endif (tcsh reserved word), Built-in Commands

endsw (tcsh reserved word), Built-in Commands

enhance Solaris command, Alphabetical Summary of Solaris Commands

ENTER command (ex), Alphabetical Summary of ex Commands

env command, Alphabetical Summary of Common Commands

environment variables

CVS, Dot Files

client, Dot Files

server, Client Environment Variables

CVSROOT directory, Internal Variables in CVSROOT Files

modifying values, Alphabetical Summary of Common Commands

printing values of, Alphabetical Summary of Common Commands

RCS, Specifying States

tcsh shell, Sample .tcshrc File

environment, displaying, Alphabetical Summary of Common Commands

equal sign

=- last entry in directory stack (tcsh), Examples

esac (shell keyword), Built-in Commands (Bash and Korn Shells)

Escape key (Emacs commands), Buffer and Window

escape sequences

awk strings and regular expression constants, Escape Sequences

Bash processing of PS1, PS2, and PS4 values, Discipline Functions (ksh93 Only)

echo command, Alphabetical Summary of Common Commands

GNU utilities, Search Patterns

text quoted with $' ', Examples

troff, Useful Escape Sequences

valid anywhere, GNU sed Regular Expression Extensions

valid only in regular expressions, GNU sed Regular Expression Extensions

etags command, Alphabetical Summary of Common Commands

eval command

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

tcsh, eval

evaluating arguments and expressions, Alphabetical Summary of Common Commands

evim command, Alphabetical Summary of Common Commands

ex editor, Alphabetical Summary of Common Commands, Command-Line Syntax, Syntax of ex Commands

addresses for commands, Syntax of ex Commands

command options, Options

command syntax, Syntax of ex Commands

commands, alphabetical summary of, Options

pattern-matching metacharacters, Metacharacters, Listed by Unix Program

search-and-replace examples, Examples of Searching and Replacing

starting vi from, Command-Line Options

exec command

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

tcsh, eval

exec file (GDB), Conceptual Overview

exec-file command (GDB), Alphabetical Summary of GDB Commands

executable files, shared objects for, Alphabetical Summary of Common Commands

executable object module, combining object files into, Alphabetical Summary of Common Commands

executing commands

after logout, Alphabetical Summary of Common Commands

of lower priority, Alphabetical Summary of Common Commands

wait between, Alphabetical Summary of Common Commands

executing Java bytecode, Alphabetical Summary of Java Commands

exit command

awk, exit

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

tcsh, Built-in Commands

exit status, test

commands, Common Options

exp function (awk), Alphabetical Summary of awk Functions and Commands

expand command, Alphabetical Summary of Common Commands

export command, Built-in Commands (Bash and Korn Shells)

CVS, export

svn, Examples

exporting make utility macros, Macro values

expr command, Alphabetical Summary of Common Commands

expressions

Bash and ksh, Arithmetic Expressions, Built-in Commands (Bash and Korn Shells)

evaluating, Alphabetical Summary of Common Commands

GDB, GDB Expressions

tcsh shell, Operators

@ command examples, Examples

if and while statements (examples), Examples

operators, Expressions

.exrc file (vi)

example, Options Used by :set

extension function (gawk), Alphabetical Summary of awk Functions and Commands

extracting columns/fields from files, Alphabetical Summary of Common Commands

Exuberant ctags, ctags

F

f (frame) command (GDB), Group Listing of GDB Commands

factor command, Alphabetical Summary of Common Commands

false command, Alphabetical Summary of Common Commands, Built-in Commands (Bash and Korn Shells)

Fast Lexical Analyzer Generator (flex) command, Alphabetical Summary of Common Commands

fc command, Examples, Built-in Commands (Bash and Korn Shells)

fdformat command, Alphabetical Summary of Common Commands

fflush function (gawk), Alphabetical Summary of awk Functions and Commands

fg command

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

GDB, file

tcsh shell, Built-in Commands

fgrep command, Alphabetical Summary of Common Commands

fi (shell keyword), Built-in Commands (Bash and Korn Shells)

figlet program, Alphabetical Summary of Common Commands

/etc/passwd file, Which Shell Do I Want?, Special Files

file command, Alphabetical Summary of Common Commands

ex, Alphabetical Summary of ex Commands

GDB, file

file creation mode mask, umask

file descriptors, Redirection using file descriptors

file flags, changing, Alphabetical Summary of Mac OS X Commands

file inclusion facility, gawk, Profiling

file inquiry operators (tcsh), File inquiry operators

file management commands, Beginner's Guide

chgrp, chgrp

chmod, chmod

chown, chown

csplit, csplit

Emacs, File-Handling Commands

GDB, Examining Data

split, split

vi, Saving and Exiting

file properties (Subversion), Converting a Repository from CVS to Subversion

file resolution (GDB), Special Expressions

filename command, Built-in Commands (Bash and Korn Shells)

filename metacharacter, Bash and ksh, Examples

filenames

metacharacters, Pattern Matching

Bash and Korn shells, Special Files

pattern matching vs., Filenames Versus Patterns

tcsh, Syntax

reducing pathnames to, Alphabetical Summary of Common Commands

stripping from pathnames, Alphabetical Summary of Common Commands

temporary, generating for use in script, Alphabetical Summary of Common Commands

files, Alphabetical Summary of Common Commands

access and modification times, updating, Alphabetical Summary of Common Commands

access modes, changing (chmod), Alphabetical Summary of Common Commands

calculating checksum, Alphabetical Summary of Common Commands

classifying by data type, Alphabetical Summary of Common Commands

comparing, Alphabetical Summary of Common Commands

comm command, Alphabetical Summary of Common Commands

diff command, Alphabetical Summary of Common Commands

diff3 command, Alphabetical Summary of Common Commands

sdiff command, Alphabetical Summary of Common Commands

vimdiff command, Alphabetical Summary of Common Commands

compiling, Alphabetical Summary of Common Commands

converting

character sets, Alphabetical Summary of Common Commands

DOS to ISO, Alphabetical Summary of Common Commands

ISO to DOS, Alphabetical Summary of Common Commands

converting into tables with yacc, Alphabetical Summary of Common Commands

copying, GNU/Linux and Mac OS X Options

ditto command, Alphabetical Summary of Mac OS X Commands

remotely, Alphabetical Summary of Common Commands

securely between network hosts, Alphabetical Summary of Common Commands

to or from tape, Alphabetical Summary of Common Commands

counting words/characters/lines of, Alphabetical Summary of Common Commands

crontab files, Alphabetical Summary of Common Commands

deleting with rm, Alphabetical Summary of Common Commands

disassembling, Alphabetical Summary of Solaris Commands

display format options (hexdump), Alphabetical Summary of Common Commands

displaying by page, Alphabetical Summary of Common Commands

dot files, Dot Files

encoded, recreating original file, Alphabetical Summary of Common Commands

extracting columns/fields with cut, Alphabetical Summary of Common Commands

formatting lines in, Alphabetical Summary of Common Commands

formatting with pr command, Alphabetical Summary of Common Commands

joining similar lines of, Alphabetical Summary of Common Commands

linking, Alphabetical Summary of Common Commands

listing

for current directory, Alphabetical Summary of Common Commands

those to be executed, Alphabetical Summary of Common Commands

listing shared objects for, Alphabetical Summary of Common Commands

merging lines into columns, Alphabetical Summary of Common Commands

moving or renaming, Alphabetical Summary of Common Commands

name list (symbol table), printing, Alphabetical Summary of Common Commands

numbering lines in, Alphabetical Summary of Common Commands

object files, displaying profile data for, Alphabetical Summary of Common Commands

overwriting to make unrecoverable, Alphabetical Summary of GNU/Linux Commands

ownership of, Alphabetical Summary of Common Commands

changing (chown), Alphabetical Summary of Common Commands

paging, Alphabetical Summary of Common Commands

printing

appending to, Alphabetical Summary of Common Commands

initial lines of, Alphabetical Summary of Common Commands

last lines of, Alphabetical Summary of Common Commands

lp command, Alphabetical Summary of Common Commands

pseudonyms (links) for, ln

removing duplicate lines, Alphabetical Summary of Common Commands

removing information from, Alphabetical Summary of Common Commands

removing with srm, Alphabetical Summary of Mac OS X Commands

renaming, Alphabetical Summary of GNU/Linux Commands

retrieving from Internet

curl command, Building Software, Alphabetical Summary of Common Commands

wget command, Building Software, Alphabetical Summary of GNU/Linux Commands

searching for with find, Alphabetical Summary of Common Commands

size of, Options

sorting, Alphabetical Summary of Common Commands

splitting into multiple files, Alphabetical Summary of Common Commands

based on size, Alphabetical Summary of Common Commands

synchronizing across network connection, Alphabetical Summary of Common Commands, Alphabetical Summary of Solaris Commands

uncompressing with zcat, Alphabetical Summary of Common Commands

filesync Solaris command, Alphabetical Summary of Solaris Commands

filesystem-related parameters, getconf

filesystems

ISO 9660/Joliet/HFS filesystem, Alphabetical Summary of Common Commands

mount command, Alphabetical Summary of Solaris Commands

mounting, Alphabetical Summary of Common Commands

GNU/Linux, Alphabetical Summary of GNU/Linux Commands, Alphabetical Summary of Mac OS X Commands

Mac OS X, mount

Solaris, mount

Unix, serving to Windows systems, Alphabetical Summary of Common Commands

unmounting, Alphabetical Summary of Common Commands, Options

GNU/Linux umount, Alphabetical Summary of GNU/Linux Commands

Mac OS X, Options

Solaris, Alphabetical Summary of Solaris Commands

filetest command (tcsh), Built-in Commands

find command, Alphabetical Summary of Common Commands

finger command, Alphabetical Summary of Common Commands

finish command (GDB), Alphabetical Summary of GDB Commands

Fink package manager, Mac OS X Package Management

Aqua-based GUI, Fink and Fink Commander

flags

changing file flags, Alphabetical Summary of Mac OS X Commands

Debian packages, Package Priorities

format specifiers for printf and sprintf, printf Formats

flex (Fast Lexical Analyzer Generator) command, Alphabetical Summary of Common Commands

floppy disks

ejecting, Alphabetical Summary of Common Commands

formatting, Alphabetical Summary of Common Commands

fmt command, Alphabetical Summary of Common Commands

fo (forward-search) command (GDB), Group Listing of GDB Commands

focus command (GDB), Alphabetical Summary of GDB Commands

fold command (ex), Alphabetical Summary of ex Commands

foldclose command (ex), Alphabetical Summary of ex Commands

foldopen command (ex), Alphabetical Summary of ex Commands

for command (awk), Alphabetical Summary of awk Functions and Commands

for loop, Built-in Commands (Bash and Korn Shells)

for shell keyword, Built-in Commands (Bash and Korn Shells)

foreach command (tcsh), Built-in Commands

format specifiers for printf and sprintf, printf Formats

formatting disks and memory cards, Alphabetical Summary of Common Commands

formatting files with pr command, Alphabetical Summary of Common Commands

formatting text (fmt command), Alphabetical Summary of Common Commands

Fortran programming language, compiling (gcc), Alphabetical Summary of Common Commands

forward-search command (GDB), Alphabetical Summary of GDB Commands

frame command (GDB), Alphabetical Summary of GDB Commands

free disk space, reporting, Alphabetical Summary of Common Commands

freshen options (rpm), Install, upgrade, and freshen options

FTP (File Transfer Protocol), secure transfer using ssh (sftp), Alphabetical Summary of Common Commands

ftp command, Alphabetical Summary of Common Commands

function (shell keyword), Built-in Commands (Bash and Korn Shells)

function command (awk), Alphabetical Summary of awk Functions and Commands

functions, Functions

awk

alphabetical summary, Group Listing of awk Functions and Commands

group listing, Group Listing of awk Functions and Commands

built-in mathematical functions (ksh93), Built-in Mathematical Functions (ksh93 Only)

discipline functions (ksh93), Discipline Functions (ksh93 Only)

GNU make, for text manipulation, Text Manipulation with Macros and Functions

listing names (ctags), Alphabetical Summary of Common Commands

user-defined, in awk, Escape Sequences

functions command (ksh), Built-in Commands (Bash and Korn Shells)

G

g command (sed), Alphabetical Summary of sed Commands

G command (sed), Alphabetical Summary of sed Commands

g++ command, Alphabetical Summary of Common Commands

gawk Linux command, Alphabetical Summary of GNU/Linux Commands

gawk programming language, Conceptual Overview

features, Conceptual Overview

features specific to, Gawk-Specific Features

coprocesses and sockets, Gawk-Specific Features

file inclusion, File Inclusion

internationalization, Internationalization

profiling, Profiling

format specifiers for printf and sprintf, printf Formats

important options, Patterns and Procedures

octal and hexadecimal constants, Octal and Hexadecimal Constants in gawk

source code URLs, Source Code

variables, built-in, Operators

GCC (GNU Compiler Collection), Solaris, Alphabetical Summary of Common Commands

general options, Alphabetical Summary of Common Commands

linker options, Alphabetical Summary of Common Commands

preprocessor options, Alphabetical Summary of Common Commands

gcore (generate-core-file) command (GDB), Group Listing of GDB Commands

gcore command, Alphabetical Summary of Common Commands

GDB (GNU Debugger), Conceptual Overview

C preprocessor macros, Conceptual Overview

command-line syntax, Source Code Locations

commands, alphabetical summary, Alphabetical Summary of GDB Commands

commands, listed by category, Group Listing of GDB Commands

aliases for other commands, Group Listing of GDB Commands

examining data, Examining Data

examining the stack, Examining the Stack

file manipulation, Examining Data

frequently used commands, Text User Interface Commands

running a program, Running a Program

status inquiries, Examining the Stack

support facilities, Examining the Stack

Text User Interface commands, Text User Interface Commands

expressions, GDB Expressions

special expressions, Special Expressions

files specified when doing debugging, Conceptual Overview

info command, Summary of the info Command

initialization files, The .gdbinit File

program stoppers, Conceptual Overview

set and show commands, Text User Interface Commands

source code URLs, Source Code Locations

Text User Interface (TUI), Group Listing of GDB Commands

user interfaces, Conceptual Overview

gdb command, Alphabetical Summary of Common Commands

generate-core-file command (GDB), Alphabetical Summary of GDB Commands

generate-rss command (yum), Yum Command Summary

gensub function (gawk), Alphabetical Summary of awk Functions and Commands

getconf command, Alphabetical Summary of Common Commands

ksh93, for

getline command (awk), Alphabetical Summary of awk Functions and Commands

getopts command, Alphabetical Summary of Common Commands, Built-in Commands (Bash and Korn Shells)

getpwnam() function, Special Files

getpwuid() function, Special Files

gettext and dgettext functions, Alphabetical Summary of Common Commands

gettext command, Alphabetical Summary of Common Commands

source code URL, Source Code

gettextize Linux command, Alphabetical Summary of GNU/Linux Commands

ghostscript command, Alphabetical Summary of Common Commands

GhostScript, gs command, Alphabetical Summary of Common Commands

glob command (tcsh), Built-in Commands

global command (ex), Alphabetical Summary of ex Commands

GNU Mac OS X Public Archive (OSXGNU), The GNU Mac OS X Public Archive

GNU utilities

escape sequences, Search Patterns

gettext, Source Code

sed

addresses for commands, Pattern Addressing

options, Standard Options

regular expression extensions, GNU sed Regular Expression Extensions

troff (groff), Overview of nroff/troff

GNU/Linux, xiii

command summary, Alphabetical Summary of GNU/Linux Commands

compilers, Obtaining Compilers

Fedora distribution, Obtaining Compilers

finding commands, Finding Commands on GNU/Linux and Mac OS X

package management, The Debian Package Manager

goto command (tcsh), Built-in Commands

gpatch Solaris command, Alphabetical Summary of Solaris Commands

gprof command, Alphabetical Summary of Common Commands

graph character class, Examples

grep command, Alphabetical Summary of Common Commands

pattern-matching metacharacters, Metacharacters, Listed by Unix Program

quoting regular expressions, Examples of Searching

groff (GNU troff), Overview of nroff/troff

groff command, Alphabetical Summary of Common Commands

groupinfo command (yum), Yum Command Summary

groupinstall command (yum), Yum Command Summary

grouplist command (yum), Yum Command Summary

groupremove command (yum), Yum Command Summary

groups

file ownership for, Alphabetical Summary of Common Commands

id command, Alphabetical Summary of Common Commands

groups command, Alphabetical Summary of Common Commands

groupupdate command (yum), Yum Command Summary

gs command, Alphabetical Summary of Common Commands

gsub function (awk), Alphabetical Summary of awk Functions and Commands

GUIs (Graphical User Interfaces)

python program with, Alphabetical Summary of Mac OS X Commands

shells vs., Introduction to the Shell

gunzip command, Alphabetical Summary of Common Commands

gvimdiff command, Alphabetical Summary of Common Commands

gzcat command, Alphabetical Summary of Common Commands

gzip command, Alphabetical Summary of Common Commands

H

h (help) command (GDB), Group Listing of GDB Commands

h command (sed), Alphabetical Summary of sed Commands

H command (sed), Alphabetical Summary of sed Commands

hackability of Subversion, Building a Better CVS

handle command (GDB), Alphabetical Summary of GDB Commands

hangups, command immunity to, Alphabetical Summary of Common Commands

hash command

Bash, getopts

ksh, Built-in Commands (Bash and Korn Shells)

hashstat command (tcsh), Built-in Commands

hbreak command (GDB), Alphabetical Summary of GDB Commands

head command, Alphabetical Summary of Common Commands

headers (Java code), Alphabetical Summary of Java Commands

help

Emacs commands for, Basic Indentation Commands

manpage keyword lookup, Alphabetical Summary of Common Commands

help command

Bash, hash

GDB, handle

svn, help

svnadmin, Examples

svnlook, Example

here document, Simple redirection

here string, Simple redirection

hexadecimal constants (gawk), Escape Sequences

hexadecimal digits, matched by xdigit character class, Examples

hexdump command, Alphabetical Summary of Common Commands

HFS filesystem, generating, Alphabetical Summary of Common Commands

hide command (ex), Alphabetical Summary of ex Commands

hist command (ksh93), Examples, Built-in Commands (Bash and Korn Shells)

history command

Bash, history

CVS, history

Korn shells, Built-in Commands (Bash and Korn Shells)

svnlook, history

tcsh, Built-in Commands

hostname command, Alphabetical Summary of Common Commands

hotcopy command (svnadmin), svnadmin Subcommands

hup command (tcsh), Built-in Commands

I

i (info) command (GDB), Group Listing of GDB Commands

i command (sed), Alphabetical Summary of sed Commands

I/O processing commands (sed), Basic Editing

iconv command, Alphabetical Summary of Common Commands

id command, Alphabetical Summary of Common Commands

ident command (RCS), Alphabetical Summary of Commands

if (shell keyword), Built-in Commands (Bash and Korn Shells)

if command

awk, Alphabetical Summary of awk Functions and Commands

GDB, ignore

tcsh, Built-in Commands

if statements (tcsh), Examples

igawk program, Alphabetical Summary of GNU/Linux Commands, Profiling

ignore command (GDB), Alphabetical Summary of GDB Commands

import command

CVS, import

svn, help

include statements (makefile), Special Dependencies

indentation commands (Emacs), Indentation Commands

basic, Basic Indentation Commands

index function (awk), Alphabetical Summary of awk Functions and Commands

indirect variables, Variable Substitution

info command, Alphabetical Summary of Common Commands

GDB, watchdog, ignore

svn, Examples

svnlook, history

yum, Yum Command Summary

InfoZIP format, zip

init command (CVS), Alphabetical Summary of Commands

initialization files (GDB), Initialization Files

inodes, reporting on, Alphabetical Summary of Common Commands

input mode (telnet), Alphabetical Summary of Common Commands

input modes (terminal), Alphabetical Summary of Common Commands

insert command (ex), Alphabetical Summary of ex Commands

insert mode (vi), Review of vi Operations

Insight, Source Code Locations

inspect command (GDB), Alphabetical Summary of GDB Commands

install command (yum), Yum Command Summary

installation options (rpm), Install, upgrade, and freshen options

installf Solaris command, Solaris Package Management Command Summary

instruction-level debuggers, Conceptual Overview

int function (awk), Alphabetical Summary of awk Functions and Commands

integer command (ksh), Built-in Commands (Bash and Korn Shells)

interactive conversation, Alphabetical Summary of Common Commands

interactive use of shells, Purpose of the Shell

internationalization, Alphabetical Summary of Common Commands

gawk features, Internationalization

locale command, Alphabetical Summary of Common Commands

ISO 8601 date format, ISO 8601

ISO 9660/Joliet/HFS filesystem, generating, Alphabetical Summary of Common Commands

ispell command, Alphabetical Summary of Common Commands, Alphabetical Summary of GNU/Linux Commands

J

jar Java command, Alphabetical Summary of Java Commands

jarsigner Java command, Alphabetical Summary of Java Commands

Java

command summary, Alphabetical Summary of Java Commands

compiling with gcc, Alphabetical Summary of Common Commands

java Java command, Alphabetical Summary of Java Commands

javac Java command, Alphabetical Summary of Java Commands

javadoc Java command, Alphabetical Summary of Java Commands

javah Java command, Alphabetical Summary of Java Commands

javap Java command, Alphabetical Summary of Java Commands

jdb Java command, Alphabetical Summary of Java Commands

job control

Bash and Korn shells, Job Control

tcsh shell, Job Control

jobID argument, Job Control

tcsh job control commands, Built-in Commands

jobs command

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

tcsh, Built-in Commands

join command, Alphabetical Summary of Common Commands

ex, Alphabetical Summary of ex Commands

jump command (GDB), Alphabetical Summary of GDB Commands

jumps command (ex), Alphabetical Summary of ex Commands

K

k command (ex), Alphabetical Summary of ex Commands

keyboard shortcuts for editing, Line-Edit Mode

keylogin Solaris command, Alphabetical Summary of Solaris Commands

keylogout Solaris command, Alphabetical Summary of Solaris Commands

keys (authentication), generating for ssh, Alphabetical Summary of Common Commands

keytool Java command, Alphabetical Summary of Java Commands

keyword substitutions, Introduction and Terminology

CVS, Server Environment Variables

RCS, Basic Operation

example, Example Values

Subversion, Special File Properties

keywords

CVS, Server Environment Variables

date keywords, RFC 822 and RFC 1123

expr, Keywords

RCS, listed, Example Values

Subversion, Building a Better CVS, Special File Properties

kill command, Alphabetical Summary of Common Commands

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

Emacs, Modes

GDB, ignore

tcsh shell, Built-in Commands

kserver command (CVS), Alphabetical Summary of Commands

ksh (Korn shell), Which Shell Do I Want?

arithmetic expressions, Arithmetic Expressions

command execution, Job Control

command history, Command History

line-edit mode, Line-Edit Mode

command syntax, Examples

commands, built-in, Built-in Commands (Bash and Korn Shells)

coprocesses, Coprocesses

features differing from Bash and tcsh, Differing Features

features in common with Bash and tcsh, Shell Source Code URLs

filename metacharacters, Special Files

functions, Functions

history of, Differing Features

invoking, Invoking the Shell

arguments, Arguments

common options, Invoking the Shell

job control, Job Control

overview of features, Overview of Features

Public Domain Korn shell (pdksh), Alphabetical Summary of GNU/Linux Commands, Shell Source Code URLs

quoting, Examples

redirection syntax, Examples

restricted version (rksh), Alphabetical Summary of Solaris Commands

setting restrictions on, Restricted Shells

syntax, Arguments

special files, Special Files

variables, Variables

arrays, Arrays

built-in, Examples

discipline functions, Discipline Functions (ksh93 Only)

other shell variables, Other Shell Variables

special prompt settings, Discipline Functions (ksh93 Only)

variable substitution, Variable Substitution

ksh88, The Bash and Korn Shells

ksh93, The Bash and Korn Shells

associative arrays, Arrays

built-in mathematical functions, Built-in Mathematical Functions (ksh93 Only)

built-in shell variables, Built-in Shell Variables

capabilities differing from ksh88, Invoking the Shell

L

l (list) command (GDB), Group Listing of GDB Commands

l command (sed), Alphabetical Summary of sed Commands

lam Mac OS command, Alphabetical Summary of Mac OS X Commands

layout command (GDB), Alphabetical Summary of GDB Commands

ld command, Alphabetical Summary of Common Commands

ldd command, Alphabetical Summary of Common Commands

leave Mac OS command, Alphabetical Summary of Mac OS X Commands

left command (ex), Alphabetical Summary of ex Commands

Lempel-Ziv (LZ77) coding, Alphabetical Summary of Common Commands

length function (awk), Alphabetical Summary of awk Functions and Commands

less program, Alphabetical Summary of Common Commands

let command, Arithmetic Expressions, Built-in Commands (Bash and Korn Shells)

lex command, Alphabetical Summary of Common Commands

lexical analysis programs, generating, Alphabetical Summary of Common Commands

library calls, tracing (ltrace), Alphabetical Summary of GNU/Linux Commands

library dependencies (GNU make), Special Dependencies

limit command (tcsh), Built-in Commands

line breaks, nroff/troff requests and, Requests that cause a line break

line information commands (sed), Basic Editing

line Solaris command, Alphabetical Summary of Solaris Commands

line-edit mode (command history), Line-Edit Mode

lines

counting in files, Alphabetical Summary of Common Commands

formatting in files, Alphabetical Summary of Common Commands

numbering in files, Alphabetical Summary of Common Commands

reading from standard input, Alphabetical Summary of Solaris Commands

link command, Alphabetical Summary of Common Commands

/bin/sh, link to Bash, Invoking the Shell

links, creating for files, Alphabetical Summary of Common Commands

lint command, secure (splint), Alphabetical Summary of GNU/Linux Commands

Linux

package management, Package Management

list command

ex, Alphabetical Summary of ex Commands

GDB, Alphabetical Summary of GDB Commands

svn, list

yum, Yum Command Summary

list dynamic dependencies (ldd command), Alphabetical Summary of Common Commands

list-dblogs command (svnadmin), svnadmin Subcommands

list-unused-dblogs command (svnadmin), svnadmin Subcommands

listing files

for current directory, Alphabetical Summary of Common Commands

in archives, Alphabetical Summary of Common Commands

to be executed, Alphabetical Summary of Common Commands

listusers Solaris command, Alphabetical Summary of Solaris Commands

ln command, Alphabetical Summary of Common Commands

load command (svnadmin), svnadmin Subcommands

loader (ld command), Alphabetical Summary of Common Commands

loading and executing Java bytecode, Alphabetical Summary of Java Commands

local command (Bash), Built-in Commands (Bash and Korn Shells)

local modes (terminal), Alphabetical Summary of Common Commands

locale command, Alphabetical Summary of Common Commands

localinstall command (yum), Yum Command Summary

localization of strings, Alphabetical Summary of Common Commands

localupdate command (yum), Yum Command Summary

locate command, Alphabetical Summary of Common Commands

lockfile that can be used from shell scripts, shlock

locking/unlocking files, Usage Models

log command

CVS, Options

svn, list

svnlook, history

tcsh, Built-in Commands

log function (awk), Alphabetical Summary of awk Functions and Commands

logged-in users

displaying with users, Alphabetical Summary of Common Commands

listing with who, Alphabetical Summary of Common Commands

logger command, Alphabetical Summary of Common Commands

logging

checking in edited source code, Introduction and Terminology

GDB command output, logging

rlog command, General RCS Specifications

logging in

as another user, Alphabetical Summary of Common Commands

displaying login name, Alphabetical Summary of Common Commands

slogin command, Alphabetical Summary of Common Commands

logical operators, Logical Operators

awk, Operators

Bash and ksh, Examples, Arithmetic Expressions, Built-in Mathematical Functions (ksh93 Only)

tcsh, Expressions

login command, Alphabetical Summary of Common Commands

CVS, login

ksh, Examples

tcsh, Built-in Commands

logname command, Alphabetical Summary of Common Commands

logout command

Bash, Examples

CVS, logout

tcsh, Built-in Commands

look command, Alphabetical Summary of Common Commands

lower character class, Examples

lp command, Alphabetical Summary of Common Commands

lpq command, Alphabetical Summary of Common Commands

lpr command, Alphabetical Summary of Common Commands

lprm command, Alphabetical Summary of Common Commands

lpstat command, Alphabetical Summary of Common Commands

ls command, Alphabetical Summary of Common Commands

color options, setting, Alphabetical Summary of GNU/Linux Commands

ls-F command (tcsh), Built-in Commands

lshift function (gawk), Alphabetical Summary of awk Functions and Commands

lstxns command (svnadmin), svnadmin Subcommands

ltrace Linux command, Alphabetical Summary of GNU/Linux Commands

lynx Linux command, Alphabetical Summary of GNU/Linux Commands

M

M- commands (emacs), Meta-Key Sequences

m4 command, Alphabetical Summary of Common Commands

mac command, Alphabetical Summary of Solaris Commands

Mac OS X Developer Tools, Alphabetical Summary of Mac OS X Commands

Mac OS X, xiii

command summary, Alphabetical Summary of Mac OS X Commands

compilers, Obtaining Compilers

finding commands, Finding Commands on GNU/Linux and Mac OS X

ksh93 from AT&T Research, Differing Features

package management, Mac OS X Package Management

mac2unix Linux command, Alphabetical Summary of GNU/Linux Commands

machine faults, tracing, Alphabetical Summary of Solaris Commands

machine registers, accessing with GDB, The Value History

Macintosh OS 9 files, converting to Unix, Alphabetical Summary of GNU/Linux Commands

macro command (GDB), Alphabetical Summary of GDB Commands

macro commands (Emacs), Indentation Commands

macros, RPM Package Concepts

definitions (makefile), Special Dependencies

Emacs, Indentation Commands

listing names (ctags), Alphabetical Summary of Common Commands

m4 processor, Alphabetical Summary of Common Commands

make utility, Creating and Using Macros

defining, Command-Line Syntax, Creating and Using Macros

exporting, Exporting macros

internal, Overriding command-line macros

macro values, Macro values

modifiers, Macro Modifiers

text manipulation, Text Manipulation with Macros and Functions

with special handling, Macro Modifiers

man, Alphabetical Summary of man Macros

nroff/troff, Example

vi editor, Macros

mail command, Alphabetical Summary of Common Commands

mail notification, biff

Mail User Agent (MUA) program (mutt), Alphabetical Summary of GNU/Linux Commands

mailx command, Alphabetical Summary of Common Commands

make command, Alphabetical Summary of Common Commands

GDB, macro

make utility, Conceptual Overview

command-line syntax, Command-Line Syntax

options, Command-Line Syntax

macro modifiers, Macro Modifiers

macros, Macros

defining, Creating and Using Macros

exporting, Exporting macros

internal, Overriding command-line macros

macro values, Macro values

overriding command line macros, Overriding command-line macros

text manipulation, Text Manipulation with Macros and Functions

with special handling, Macro Modifiers

makefile lines, Makefile Lines

conditional input, Conditional Input

special dependencies, Special Dependencies

special target names, Special Target Names

versions other than GNU make, Command-Line Syntax

writing command lines, Writing Command Lines

writing Makefile files, Writing Command Lines

makecache command (yum), Yum Command Summary

makefile files, writing, Writing Command Lines

makefile lines (make), Makefile Lines

Makefile, tuned for target system, Building Software

makefiles, Command-Line Syntax

overriding, Alphabetical Summary of Common Commands

man command, Alphabetical Summary of Common Commands

man macros, Alphabetical Summary of man Macros

internal names, Internal Names

predefined strings, Internal Names

sample document output, Internal Names

mangled names (C++ and Objective C), Conceptual Overview

manpages

displaying, Alphabetical Summary of Common Commands

displaying command descriptions in, Alphabetical Summary of Common Commands

keyword lookup, Alphabetical Summary of Common Commands

manual pages, writing, Introduction

man macros

internal names, Internal Names

summary of, Alphabetical Summary of man Macros

overview of nroff/troff, Overview of nroff/troff

sample document, Sample Document

strings predefined by man macros, Internal Names

map command (ex), Alphabetical Summary of ex Commands

mark (Emacs), Buffer and Window

mark command (ex), Alphabetical Summary of ex Commands

marks command (ex), Alphabetical Summary of ex Commands

match function (awk), Alphabetical Summary of awk Functions and Commands

mathematical functions (ksh93), Built-in Mathematical Functions (ksh93 Only)

md5sum Linux command, Alphabetical Summary of GNU/Linux Commands

measurements for nroff/troff, Example

mem command (GDB), Alphabetical Summary of GDB Commands

merge command

RCS, rcs

svn, Examples

merging changes to source code, Introduction and Terminology

mesg command, Alphabetical Summary of Common Commands

message authentication code (MAC), mac

message digests (PKCS#11), computing for files, Alphabetical Summary of Solaris Commands

Meta-key commands (Emacs), Buffer and Window, Meta-Key Sequences

metacharacters, Pattern Matching, Metacharacters

Bash and Korn shell filenames, Special Files

filenames vs. patterns, Filenames Versus Patterns

listed by Unix program, Metacharacters, Listed by Unix Program

replacement pattern, Replacement Patterns

searching and replacing in sed and ex, Examples of Searching and Replacing

tcsh filenames, Syntax

metadata, versioned, Building a Better CVS

mkdir command, Alphabetical Summary of Common Commands

svn, Examples

mkexrc command (ex), Alphabetical Summary of ex Commands

mkisofs command, Alphabetical Summary of Common Commands

mktemp command, Alphabetical Summary of Common Commands

mktime function (gawk), Alphabetical Summary of awk Functions and Commands

modes

Emacs editor, Conceptual Overview

telnet, telnet

vi editor, Command-Line Syntax, Review of vi Operations

modification timestamp for files, updating, Alphabetical Summary of Common Commands

mod_dav_svn plug-in (Subversion), Other Subversion Components

monotone version control system, Other Source Code Management Systems

more command, Alphabetical Summary of Common Commands

mount command, Alphabetical Summary of Common Commands

Linux, Alphabetical Summary of GNU/Linux Commands

Mac OS, mount

Solaris, mount

move command

ex, mkexrc

svn, Examples

moving directories and files, Alphabetical Summary of Common Commands

msgfmt command, Alphabetical Summary of Common Commands

MUA (Mail User Agent) program (mutt), Alphabetical Summary of GNU/Linux Commands

multiline input processing (sed), Multiline Input Processing

multiple redirection, Redirection using file descriptors

mutt Linux command, Alphabetical Summary of GNU/Linux Commands

mv command, Alphabetical Summary of Common Commands

N

n (next) command (GDB), Group Listing of GDB Commands

n command (sed), Alphabetical Summary of sed Commands

N command (sed), Alphabetical Summary of sed Commands

name demangling, Conceptual Overview, Summary of set and show Commands

name list (symbol table), printing for object files, Alphabetical Summary of Common Commands

name() function, Built-in Commands (Bash and Korn Shells)

nameref command (ksh93), Built-in Commands (Bash and Korn Shells)

names

current Unix system name, printing, Alphabetical Summary of Common Commands

directories, printing, Alphabetical Summary of Common Commands

functions and macros, listing (ctags), Alphabetical Summary of Common Commands

nano Mac OS command, Alphabetical Summary of Mac OS X Commands

native methods, implementing in Java, Alphabetical Summary of Java Commands

nawk command, Alphabetical Summary of Common Commands, Alphabetical Summary of Solaris Commands

nawk programming language, Conceptual Overview

network layers, choice with Subversion, Building a Better CVS

networks, securing remote connections cryptographically (ssh), Alphabetical Summary of Common Commands

new command (ex), Alphabetical Summary of ex Commands

newgrp command (tcsh), Built-in Commands

newlines

word separators in Bash and ksh, Examples

word separators in tcsh, Examples

next command

awk, Alphabetical Summary of awk Functions and Commands

ex, mkexrc

GDB, Memory Access Attributes

nextfile command (awk), Alphabetical Summary of awk Functions and Commands

nexti command (GDB), Alphabetical Summary of GDB Commands

ni (nexti) command (GDB), Group Listing of GDB Commands

nice command, Alphabetical Summary of Common Commands

tcsh, Built-in Commands

nl command, Alphabetical Summary of Common Commands

nm command, Alphabetical Summary of Common Commands

nohlsearch command (ex), Alphabetical Summary of ex Commands

nohup command, Alphabetical Summary of Common Commands

Korn shells, Built-in Commands (Bash and Korn Shells)

tcsh, Built-in Commands

nosharedlibrary command (GDB), Alphabetical Summary of GDB Commands

NOT operator (!), Examples

notify command (tcsh), Built-in Commands

nroff/troff

command-line invocation, Overview of nroff/troff

comments, Outline of Useful Requests

eliminating .so requests, Alphabetical Summary of Common Commands

embedded formatting controls, Requests that cause a line break

escape sequences, Useful Escape Sequences

input files, preprocessing, Alphabetical Summary of Common Commands

man macros, Alphabetical Summary of man Macros

measurements, specifying, Example

requests and macros, Example

requests that cause a line break, Requests that cause a line break

special characters, Special Characters

null command, Alphabetical Summary of Common Commands, Built-in Commands

number command (ex), Alphabetical Summary of ex Commands

number registers (man macros), Internal Names

numbering lines in files, Alphabetical Summary of Common Commands

numbers

converting from one base to another, Alphabetical Summary of Common Commands

converting units of, Alphabetical Summary of Common Commands

prime factors, factor

printing in sequence, Alphabetical Summary of GNU/Linux Commands

nvi text editor, Conceptual Overview

O

object files

combining into single executable object module, Alphabetical Summary of Common Commands

generating, Alphabetical Summary of Common Commands

portable, translation into loadable message files, Alphabetical Summary of Common Commands

removing information from, Alphabetical Summary of Common Commands

Objective C programming language, compiling (gcc), Alphabetical Summary of Common Commands

octal and hexadecimal constants (gawk), Escape Sequences

octal dump (od) command, Alphabetical Summary of Common Commands

od (octal dump) command, Alphabetical Summary of Common Commands

onintr command (tcsh), Built-in Commands

only command (ex), Alphabetical Summary of ex Commands

ooffice Linux command, Alphabetical Summary of GNU/Linux Commands

open command (ex), Alphabetical Summary of ex Commands

Open Office office productivity suite, ooffice

open-x11 Mac OS command, Alphabetical Summary of Mac OS X Commands

OpenSSH, ssh

scp command, Alphabetical Summary of Common Commands

sftp command, Alphabetical Summary of Common Commands

ssh command, Alphabetical Summary of Common Commands

OpenWindows Graphical Tools, Alphabetical Summary of Solaris Commands

Operating System/Application Binary Interface (OSABI), Summary of set and show Commands

operators

awk, Built-in Variables

Bash and ksh, Arithmetic Expressions

tcsh shell, Operators

optimization around the network (Subversion), Building a Better CVS

Option key (Emacs commands), Buffer and Window

or function (gawk), Alphabetical Summary of awk Functions and Commands

OR operator

^ (bitwise exclusive OR), Built-in Mathematical Functions (ksh93 Only)

| (bitwise OR), Built-in Mathematical Functions (ksh93 Only), Operators

|| (logical OR), Examples, Built-in Mathematical Functions (ksh93 Only), Variable and Array Assignment

order-only prerequisites (GNU make dependencies), Special Dependencies

OS X Package Manager, The GNU Mac OS X Public Archive

OSXGNU (GNU Mac OS X Public Archive), The GNU Mac OS X Public Archive

output command (GDB), Alphabetical Summary of GDB Commands

output modes (terminal), Alphabetical Summary of Common Commands

output processing commands (sed), Basic Editing

overloaded procedure names (C++ and Objective C), Conceptual Overview

ownership of files, Alphabetical Summary of Common Commands

changing, Alphabetical Summary of Common Commands

P

p (print) command

GDB, The GDB Text User Interface

sed, q

P command (sed), Alphabetical Summary of sed Commands

package management, Package Management

Linux, Package Management

Debian Package Manager, The Debian Package Manager

Red Hat Package Manager, The Red Hat Package Manager

Red Hat Update Agent (up2date), up2date: Red Hat Update Agent

Yum (Yellowdog Updater Modified), Yum: Yellowdog Updater Modified

Mac OS X, Mac OS X Package Management

Solaris, Solaris Package Management

page command, Alphabetical Summary of Solaris Commands

paging commands

less, less

more, more

paging files, Alphabetical Summary of Common Commands

paragraph commands (Emacs), Paragraphs and Regions

parser (bison), Alphabetical Summary of Common Commands

passwd command, Alphabetical Summary of Common Commands

passwd file, Which Shell Do I Want?

Bash and ksh, Special Files

tcsh, Syntax

user database stored in, Special Files

passwords

changing, Alphabetical Summary of Solaris Commands

creating or changing, Alphabetical Summary of Common Commands

prompting for, Alphabetical Summary of Solaris Commands

paste command, Alphabetical Summary of Common Commands

pasting text in Emacs, Buffer and Window

patch command, Alphabetical Summary of Common Commands

path command (GDB), Alphabetical Summary of GDB Commands

pathchk command, Alphabetical Summary of Common Commands

pathnames

checking for acceptability, Alphabetical Summary of Common Commands

searching for files, Alphabetical Summary of Common Commands

stripping filenames from, Alphabetical Summary of Common Commands

pattern matching, Filenames Versus Patterns

awk, awk

ex addresses, Options

fgrep, fgrep

metacharacters, Metacharacters

listed by Unix program, Metacharacters, Listed by Unix Program

replacement patterns, Replacement Patterns

search patterns, Search Patterns

searching and replacing (examples), in sed or ex, Examples of Searching and Replacing

searching, examples of, Examples of Searching

pattern rules (makefile), Makefile Lines

patterns, awk, Patterns and Procedures, Procedures

simple pattern-action examples, Simple Pattern-Action Examples

pax command, Alphabetical Summary of Common Commands

pbcopy Mac OS command, Alphabetical Summary of Mac OS X Commands

pbpaste Mac OS command, Alphabetical Summary of Mac OS X Commands

PCMCIA memory cards, formatting, Alphabetical Summary of Common Commands

PDF (Portable Document Format) language

converting PostScript input file to, Alphabetical Summary of Mac OS X Commands

ghostscript command, Alphabetical Summary of Common Commands

gs command, Alphabetical Summary of Common Commands

pdksh (Public Domain Korn shell), Shell Source Code URLs

pdksh Linux command, Alphabetical Summary of GNU/Linux Commands

perl command, Alphabetical Summary of Common Commands

Perl scripts, Debian package management, Scripts

permissions (file), changing, Alphabetical Summary of Common Commands

pgawk (profiling gawk), Profiling

pico Mac OS command, Alphabetical Summary of Mac OS X Commands

PKCS#11 message authentication code, mac

PKCS#11 message digest, computing for files, Alphabetical Summary of Solaris Commands

pkgadd Solaris command, Solaris, Solaris Package Management Command Summary

pkgadm Solaris command, Solaris Package Management Command Summary

pkgask Solaris command, Solaris Package Management Command Summary

pkgchk Solaris command, Solaris Package Management Command Summary

pkginfo Solaris command, Solaris Package Management Command Summary

pkgmk Solaris command, Solaris Package Management Command Summary

pkgparam Solaris command, Solaris Package Management Command Summary

pkgproto Solaris command, Solaris Package Management Command Summary

pkgrm Solaris command, Solaris Package Management Command Summary

po (print-object) command (GDB), Group Listing of GDB Commands

point (Emacs), Buffer and Window

popd command

Bash, popd

tcsh, Built-in Commands

Portable Archive Exchange program (pax), Alphabetical Summary of Common Commands

portable object files (.po files), translation into loadable message files, Alphabetical Summary of Common Commands

positional specifier (gawk), printf Formats

POSIX standard

character classes, listed, Replacement Patterns

make utility, Command-Line Syntax

Solaris systems, command versions, System Status

PostScript language

converting input file to PDF, Alphabetical Summary of Mac OS X Commands

ghostscript command, Alphabetical Summary of Common Commands

gs command, Alphabetical Summary of Common Commands

pr command, Alphabetical Summary of Common Commands

precision (format specifiers for printf and sprintf), Source Code

precompiled packages from Sun Microsystems, Solaris

predefined shell variables

Bash and ksh, Examples

tcsh, Predefined Shell Variables

sample .tcshrc file, Sample .tcshrc File

prerequisites (make utility), Command-Line Syntax

preserve command (ex), Alphabetical Summary of ex Commands

previous command (ex), Alphabetical Summary of ex Commands

prime factors, factor

print character class, Examples

print command

awk, Alphabetical Summary of awk Functions and Commands

output redirection, Output Redirections

ex, Alphabetical Summary of ex Commands

GDB, Memory Access Attributes

value history, The Value History

ksh, Built-in Commands (Bash and Korn Shells)

print-object command (GDB), Alphabetical Summary of GDB Commands

printenv command, Alphabetical Summary of Common Commands

tcsh, Built-in Commands

printf command, Alphabetical Summary of Common Commands

awk, Alphabetical Summary of awk Functions and Commands

output redirection, Output Redirections

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

GDB, printf

printing

all lines that begin with a string, Alphabetical Summary of Common Commands

archive files, Alphabetical Summary of Common Commands

banners, Alphabetical Summary of Common Commands

BSD commands, Miscellaneous

cancelling print requests, Alphabetical Summary of Common Commands

current system name, Alphabetical Summary of Common Commands

environment variable values, Alphabetical Summary of Common Commands

file creation mode mask, umask

files, cat

lines specified, Alphabetical Summary of Common Commands

sending files to printer with lp, Alphabetical Summary of Common Commands

sending files to printer with lpr, Alphabetical Summary of Common Commands

strings, using specified formats, Alphabetical Summary of Common Commands

system configuration variables, getconf

system usage information, Alphabetical Summary of Common Commands

System V commands, Miscellaneous

terminal device name, Alphabetical Summary of Common Commands

to standard output, echo

printing commands

cancel, cancel

lp, lp

lpq, checking spool queue, Alphabetical Summary of Common Commands

lpr, lpr

lprm, removing jobs from the queue, Alphabetical Summary of Common Commands

lpstat, printing queue status, Alphabetical Summary of Common Commands

procedures, awk, Procedures

processes

active, reports on, Alphabetical Summary of Solaris Commands

ps command, Alphabetical Summary of GNU/Linux Commands, Alphabetical Summary of Mac OS X Commands

core images of, Alphabetical Summary of Common Commands

sending signal or resetting priority, Alphabetical Summary of GNU/Linux Commands

terminating IDs, Alphabetical Summary of Common Commands

profile data, displaying, Alphabetical Summary of Common Commands

profiling in gawk, Profiling

programmable completion (Bash), Built-in Shell Variables, Examples

programming commands, Searching

programming languages

compiling with gcc, Alphabetical Summary of Common Commands

GDB support for, Conceptual Overview

source files, listing function and macro names, Alphabetical Summary of Common Commands

programming lint (splint command), Alphabetical Summary of GNU/Linux Commands

programs

GDB commands for running, Running a Program

getting description of, Alphabetical Summary of Common Commands

prompts, xvi

GDB, prompt

special prompt strings, Bash and Korn shells, Discipline Functions (ksh93 Only)

tcsh, Predefined Shell Variables

propdel command (svn), svn Subcommands

propedit command (svn), svn Subcommands

properties, Subversion files, Converting a Repository from CVS to Subversion

propget command

svn, Examples

svnlook, history

proplist command

svn, proplist

svnlook, Example

propset command (svn), svn Subcommands

provides command (yum), Yum Command Summary

ps (process status) command, Alphabetical Summary of Common Commands

Linux, Alphabetical Summary of GNU/Linux Commands

Mac OS, Alphabetical Summary of Mac OS X Commands

Solaris, openwin

PS1-PS4 variables, Discipline Functions (ksh93 Only)

pserver command (CVS), Alphabetical Summary of Commands

pstopdf Mac OS command, Alphabetical Summary of Mac OS X Commands

ptype command (GDB), Alphabetical Summary of GDB Commands

Public Domain Korn Shell (pdksh), Alphabetical Summary of GNU/Linux Commands

punct character class, Examples

pushd command

Bash, pushd

tcsh, Built-in Commands

put command (ex), Alphabetical Summary of ex Commands

putting and yanking commands

Emacs, Modes

sed, Group Summary of sed Commands

vi, Alphabetical Summary of ex Commands, open

pwd (print working directory) command, Alphabetical Summary of Common Commands

Bash and ksh, Built-in Commands (Bash and Korn Shells)

GDB, pwd

python command, Alphabetical Summary of Common Commands

pythonw Mac OS command, Alphabetical Summary of Mac OS X Commands

Q

q command (sed), Alphabetical Summary of sed Commands

Q command (sed), Alphabetical Summary of sed Commands

qall command (ex), Alphabetical Summary of ex Commands

query options (rpm), Query options

queued jobs

listing jobs created by at command, Alphabetical Summary of Common Commands

removing, Alphabetical Summary of Common Commands

quit command

ex, Alphabetical Summary of ex Commands

GDB, pwd

quoting

bash and ksh shells, Examples

tcsh shell, Examples

R

r (run) command (GDB), Group Listing of GDB Commands

r command

ksh, Built-in Commands (Bash and Korn Shells)

sed, s

R command (sed), Alphabetical Summary of sed Commands

rand function (awk), Alphabetical Summary of awk Functions and Commands

ranges, matching, Syntax

rannotate command (CVS), Alphabetical Summary of Commands

rbreak command (GDB), Alphabetical Summary of GDB Commands

rcp command, Alphabetical Summary of Common Commands

RCS (Revision Control System), Unix Source Code Management Systems, Overview of Commands

basic operation, Basic Operation

check out with locking model, Usage Models

commands, overview, Overview of Commands

commands, summarized alphabetically, Alphabetical Summary of Commands

date and time of check-in, Revision Numbering

keyword substitution, Keyword Substitution

example, Example Values

keywords, listed, Example Values

options and environment variables, Specifying States

revision numbers, Revision Numbering

revision states, Specifying States

rcs command, Alphabetical Summary of Common Commands

svn, Alphabetical Summary of Commands

rcsclean command (RCS), Alphabetical Summary of Commands

rcsdiff command (RCS), General RCS Specifications, Alphabetical Summary of Commands

rcsfreeze command (RCS), Alphabetical Summary of Commands

RCSINIT environment variable, Specifying States

rcsmerge command (RCS), Alphabetical Summary of Commands

rdiff command (CVS), Alphabetical Summary of Commands

read command

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

ex, Alphabetical Summary of ex Commands

reading email messages, Alphabetical Summary of Common Commands

readline library, Initialization Files

readonly command, Built-in Commands (Bash and Korn Shells)

recover command

ex editor, Alphabetical Summary of ex Commands

svnadmin, Example

Red Hat Network Notification Tool (rhn-applet), up2date: Red Hat Update Agent

redirect command (ksh93), Built-in Commands (Bash and Korn Shells)

redirections

awk, print and printf output, Output Redirections

Bash and ksh forms for, Examples

tcsh, Quoting, Command Forms

redo command (ex), Alphabetical Summary of ex Commands

referencing arrays, Arrays

refresh command (GDB), Alphabetical Summary of GDB Commands

region commands (Emacs), Paragraphs and Regions

regular expressions, Pattern Matching

egrep command, Alphabetical Summary of Common Commands

GNU sed, extended, GNU sed Regular Expression Extensions

grep command, Alphabetical Summary of Common Commands

lexical analysis program, lex

metacharacters, Pattern Matching, Metacharacters

not supported by fgrep, Alphabetical Summary of Common Commands

search pattern metacharacters, Metacharacters

searching, examples of, Examples of Searching

sed command addresses, Pattern Addressing

rehash command (tcsh), Built-in Commands

relational operators, Relational Operators

awk, Operators

Bash and ksh, Built-in Mathematical Functions (ksh93 Only)

tcsh, File inquiry operators

release command (CVS), Alphabetical Summary of Commands

releases, Subversion, Obtaining Subversion

remote (r) commands, Alphabetical Summary of Common Commands

remote file transfer, Alphabetical Summary of Common Commands

Remote Method Invocation compiler for Java (rmic), Alphabetical Summary of Java Commands

remote object registry (Java), Alphabetical Summary of Java Commands

remote systems, copying files between, Alphabetical Summary of Common Commands

scp, scp

removable media

checking if inserted, Alphabetical Summary of Solaris Commands

ejecting, Alphabetical Summary of Common Commands

remove command

CVS, Alphabetical Summary of Commands

yum, Yum Command Summary

removef Solaris command, Solaris Package Management Command Summary

removing directories (rmdir), Alphabetical Summary of Common Commands

removing files

rm command, Alphabetical Summary of Common Commands

srm command, Alphabetical Summary of Mac OS X Commands

rename Linux command, Alphabetical Summary of GNU/Linux Commands

renaming directories and files, Alphabetical Summary of Common Commands

repeat command (tcsh), Built-in Commands

replacement patterns

metacharacters, Search Patterns

Unix program metacharacters, Examples of Searching

replacing files in archives, Alphabetical Summary of Common Commands

replacing text in sed or ex, examples of, Examples of Searching and Replacing

repository, Introduction and Terminology

access to (svnserve tool), Providing Remote Access: svnserve

administration (svnadmin tool), Repository Administration: svnadmin

options, Repository Administration: svnadmin

subcommands, svnadmin Subcommands

converting from CVS to Subversion, Converting a Repository from CVS to Subversion

examining (svnlook tool), Examining the Repository: svnlook

options, svnlook Options

subcommands, svnlook Subcommands

filtering files from dump (svndumpfilter), Other Subversion Components

requests (nroff/troff), Example

causing a line break, Requests that cause a line break

useful requests, Outline of Useful Requests

reset command, Alphabetical Summary of Common Commands

resize command (ex), Alphabetical Summary of ex Commands

resolved command (svn), svn Subcommands

restricted shells, Restricted Shells

return command

awk, Alphabetical Summary of awk Functions and Commands

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

GDB, pwd

reverse-search command (GDB), Alphabetical Summary of GDB Commands

revert command (svn), svn Subcommands

revision control systems

CVS, The Concurrent Versions System

RCS, The Revision Control System

Subversion, The Subversion Version Control System

rewind command (ex), Alphabetical Summary of ex Commands

RFC 1123 time format, RFC 822 and RFC 1123

RFC 822 time format, RFC 822 and RFC 1123

rhn-applet, up2date: Red Hat Update Agent

right command (ex), Alphabetical Summary of ex Commands

rksh Solaris command, Alphabetical Summary of Solaris Commands

rlog command

CVS, rtag

RCS, Basic Operation, rlog

rlogin command, Alphabetical Summary of Common Commands

rm command, Alphabetical Summary of Common Commands

rmdir command, Alphabetical Summary of Common Commands

RMI (remote method invocation)

compiler, rmic

rmic Java command, Alphabetical Summary of Java Commands

rmid Java command, Alphabetical Summary of Java Commands

rmiregistry Java command, Alphabetical Summary of Java Commands

rmtxns command (svnadmin), svnadmin Subcommands

RPM (Red Hat Package Manager), Linux Package Management, The Red Hat Package Manager

package concepts, RPM Package Concepts

package names, Linux Package Management

rpm command, RPM Package Concepts

rpmbuild command, RPM Examples

rpm command, RPM Package Concepts

database rebuild options, Database rebuild options

downloading packages off the Internet, The rpm Command

examples, RPM Examples

FTP/HTTP options, RPM Examples

general options, The rpm Command

information selection options, Query options

install, upgrade, and freshen options, Install, upgrade, and freshen options

miscellaneous options, Miscellaneous options

package selection options, Query options

query options, Query options

signature check options, Miscellaneous options

uninstall options, Uninstall options

verify options, Verify options

rpmbuild command, RPM Examples

RSA or DSA identities, adding to authentication agent, Alphabetical Summary of Common Commands

rsh command, Alphabetical Summary of Common Commands, Environment Variables

rshift function (gawk), Alphabetical Summary of awk Functions and Commands

rsync command, Alphabetical Summary of Common Commands

rtag command (CVS), Alphabetical Summary of Commands

rules (GNU make), Command-Line Syntax

run command (GDB), Alphabetical Summary of GDB Commands

running programs (GDB commands), Running a Program

rwatch command (GDB), Alphabetical Summary of GDB Commands

S

s (step) command (GDB), Group Listing of GDB Commands

s command (sed), Alphabetical Summary of sed Commands

Samba software suite, Alphabetical Summary of Common Commands

sandbox, Introduction and Terminology, Basic Version Control Operations

dot files in CVS, Dot Files

say command (Mac OS), Alphabetical Summary of Mac OS X Commands

sbnext command (ex), Alphabetical Summary of ex Commands

sbuffer command (ex), Alphabetical Summary of ex Commands

SCCS (Source Code Control System), Unix Source Code Management Systems

check out with locking model, Usage Models

sched command (tcsh), Built-in Commands

scp (secure copy) command, Alphabetical Summary of Common Commands

script command, Alphabetical Summary of Common Commands

scripts, RPM Package Concepts

Debian package management, Scripts

sdiff command, Alphabetical Summary of Common Commands

search command

GDB, set

yum, Yum Command Summary

search commands, Searching

egrep, egrep

Emacs, Search Commands

fgrep, fgrep

find, find

grep, grep

locate, locate

look, look

slocate, slocate

strings, strings

vi, Metacharacters, Listed by Unix Program

search patterns

metacharacters, Metacharacters

Unix metacharacters, Metacharacters, Listed by Unix Program

searching

by pattern matching, Alphabetical Summary of Common Commands

in vi editor, Screens

regular expressions, using, Examples of Searching

search-and-replace examples, sed and ex, Examples of Searching and Replacing

secret keys

decrypting, Alphabetical Summary of Solaris Commands

deleting, Alphabetical Summary of Solaris Commands

encrypting, Alphabetical Summary of Solaris Commands

section command (GDB), Alphabetical Summary of GDB Commands

secure copy (scp) command, Alphabetical Summary of Common Commands

secure ftp (sftp) command, Alphabetical Summary of Common Commands

secure network services

computing PKCS#11 MAC for given files, Alphabetical Summary of Solaris Commands

decrypting secret keys in, Alphabetical Summary of Solaris Commands

deleting secret keys in, Alphabetical Summary of Solaris Commands

encrypt Solaris command, Alphabetical Summary of Solaris Commands

encrypting secret key, Alphabetical Summary of Solaris Commands

Secure Shell (SSH), Alphabetical Summary of Common Commands

ssh command, Alphabetical Summary of Common Commands

ssh-add command, Alphabetical Summary of Common Commands

ssh-agent command, Alphabetical Summary of Common Commands

sed editor, Alphabetical Summary of Common Commands, Conceptual Overview

command syntax, Pattern Addressing

GNU sed extended regular expressions, GNU sed Regular Expression Extensions

pattern addressing, Pattern Addressing

command-line syntax, sed Operation

GNU sed options, GNU sed Options

standard options, sed Operation

commands

summary, listed alphabetically, Multiline Input Processing

commands by category, Basic Editing

basic editing, Basic Editing

branching, Basic Editing

input/output processing, Basic Editing

line information, Basic Editing

multiline input processing, Multiline Input Processing

yanking and putting, Basic Editing

operation, sed Operation

pattern-matching metacharacters, Metacharacters, Listed by Unix Program

search-and-replace examples, Examples of Searching and Replacing

typical uses of, sed Operation

select (shell keyword), Built-in Commands (Bash and Korn Shells)

select-frame command (GDB), Alphabetical Summary of GDB Commands

selection states (Debian packages), Package and Selection States

sending email messages, Alphabetical Summary of Common Commands

seq Linux command, Alphabetical Summary of GNU/Linux Commands

server command (CVS), Alphabetical Summary of Commands

server environment variables (CVS), Server Environment Variables

sessions

control by shell, Purpose of the Shell

recording, Alphabetical Summary of Common Commands

set and show commands (GDB), Text User Interface Commands

annotate, annotate

architecture, architecture

args, args

auto-solib-add, auto-solib-add

auto-solib-limit, auto-solib-limit

backtrace, backtrace

breakpoint, breakpoint

can-use-hw-watchpoints, can-use-hw-watchpoints

case-sensitive, case-sensitive

coerce-float-to-double, coerce-float-to-double

commands, commands

complaints, complaints

confirm, confirm

convenience, convenience

copying, copying

cp-abi, cp-abi

debug-file-directory, debug-file-directory

demangle-style, demangle-style

directories, directories

disassembly-flavor, disassembly-flavor

editing, editing

environment, environment

exec-done-display, exec-done-display

follow-fork-mode, follow-fork-mode

gnutarget, gnutarget

height, height

history, history

input-radix, input-radix

language, language

listsize, listsize

logging, logging

max-user-cal-depth, Summary of set and show Commands

opaque-type-resolution, opaque-type-resolution

osabi, osabi

output radix, output-radix

overload-resolution, overload-resolution

pagination, pagination

paths, paths

print, print

prompt, prompt

radix, radix

scheduler-locking, scheduler-locking

solib-absolute-prefix, solib-absolute-prefix

solib-search-path, solib-search-path

step mode, Summary of set and show Commands

stop-on-solib-events, stop-on-solib-events

symbol-reloading, symbol-reloading

tui, tui

values, values

variable, variable

verbose, verbose

version, version

warranty, warranty

watchdog, watchdog

width, width

write, write

set command

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

ex, Alphabetical Summary of ex Commands

GDB, set

tcsh, Built-in Commands

setenv command (tcsh), Built-in Commands

setlog command (svnadmin), Examining the Repository: svnlook

setpgrp Solaris command, Alphabetical Summary of Solaris Commands

settc command (tcsh), Built-in Commands

setty command (tcsh), Built-in Commands

sftp (secure ftp) command, Alphabetical Summary of Common Commands

sh command, Alphabetical Summary of Common Commands

sh, invoking Bash as, Invoking the Shell

SHA1 160-bit checksums, sha1sum

sha1sum Linux command, Alphabetical Summary of GNU/Linux Commands

shar Mac OS command, Alphabetical Summary of Mac OS X Commands

share command (GDB), Group Listing of GDB Commands

shared object libraries, tracing calls into/out of, Alphabetical Summary of Solaris Commands

sharedlibrary command (GDB), Alphabetical Summary of GDB Commands

shell archive (shar) command, Alphabetical Summary of Mac OS X Commands

shell characters, special (Emacs), Window Commands

shell command

ex, Alphabetical Summary of ex Commands

GDB, set

shell programming commands, Searching

shell scripts, Programming

Debian package management, Scripts

for background processes, Alphabetical Summary of Common Commands

lockfile used from, Alphabetical Summary of Mac OS X Commands

reading from terminal, Alphabetical Summary of Solaris Commands

shells, The Unix Shell: An Overview

choosing your shell, Which Shell Do I Want?

commands, Programming

csh command, Alphabetical Summary of Common Commands

differing features, Bash, ksh, and tcsh, Differing Features

introduction to, Introduction to the Shell

invoking Bash and Korn shells, Invoking the Shell

restricted, Restricted Shells

source code, URLs for, Shell Source Code URLs

tcsh shell, Alphabetical Summary of Common Commands

types (flavors) of, Which Shell Do I Want?

uses of, Purpose of the Shell

customizing Unix session, Purpose of the Shell

interactive use, Purpose of the Shell

shift command

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

tcsh, Built-in Commands

shlock Mac OS command, Alphabetical Summary of Mac OS X Commands

shopt command (Bash), Built-in Commands (Bash and Korn Shells)

show command (GDB), Alphabetical Summary of GDB Commands

shred Linux command, Alphabetical Summary of GNU/Linux Commands

si (stepi) command (GDB), Group Listing of GDB Commands

signal command (GDB), Alphabetical Summary of GDB Commands

signals, tracing, Alphabetical Summary of Solaris Commands

signature verification for packages, Linux Package Management

signature-checking options (rpm), Miscellaneous options

silent command (GDB), Alphabetical Summary of GDB Commands

sin function (awk), Alphabetical Summary of awk Functions and Commands

size command, Alphabetical Summary of Common Commands

skill Linux command, Alphabetical Summary of GNU/Linux Commands

sleep command, Alphabetical Summary of Common Commands

sleep command (ksh93), Built-in Commands (Bash and Korn Shells)

slocate Linux command, Alphabetical Summary of GNU/Linux Commands

slogin command, Alphabetical Summary of Common Commands

snext command (ex), Alphabetical Summary of ex Commands

snice Linux command, Alphabetical Summary of GNU/Linux Commands

sockets, use with gawk coprocesses, Gawk-Specific Features

soelim command, Alphabetical Summary of Common Commands

software, building, Building Software

Solaris

command summary, Alphabetical Summary of Solaris Commands

finding commands, Finding Commands on Solaris

package management, The GNU Mac OS X Public Archive

command summary, Solaris Package Management Command Summary

POSIX standard, programs compliant with, System Status

Solaris 10, xiii, Obtaining Compilers

compilers, Obtaining Compilers

sort command, Alphabetical Summary of Common Commands

sorting files

joining lines of sorted files, Alphabetical Summary of Common Commands

removing duplicate lines, Alphabetical Summary of Common Commands

sotruss Solaris command, Alphabetical Summary of Solaris Commands

source code

awk versions and GNU gettext, URLs, Source Code

building software from, Building Software, The GNU Mac OS X Public Archive

management, Source Code Management: An Overview

CVS (Concurrent Versions System), Conceptual Overview

RCS (Revision Control System), Overview of Commands

Subversion, The Subversion Version Control System

systems for Unix, Unix Source Code Management Systems

terminology, Source Code Management: An Overview

usage models for systems, Usage Models

source command

Bash, source

ex, source

GDB, show

tcsh, Built-in Commands

source-level debuggers, Conceptual Overview

space character class, Examples

spaces

expanding tab characters into, Alphabetical Summary of Common Commands

word separators in Bash and ksh, Examples

word separators in tcsh, Examples

special characters

tcsh, Quoting

troff, Useful Escape Sequences

spell command, Alphabetical Summary of Common Commands

splint Linux command, Alphabetical Summary of GNU/Linux Commands

split command, Alphabetical Summary of Common Commands

ex, source

split function (awk), Alphabetical Summary of awk Functions and Commands

splitting files, Alphabetical Summary of Common Commands

sprevious command (ex), Alphabetical Summary of ex Commands

sprintf function (awk), Alphabetical Summary of awk Functions and Commands

format specifiers, printf Formats

sqrt function (awk), Alphabetical Summary of awk Functions and Commands

srand function (awk), Alphabetical Summary of awk Functions and Commands

srm Mac OS command, Alphabetical Summary of Mac OS X Commands

ssh (Secure Shell) command, Alphabetical Summary of Common Commands

ssh-add command, Alphabetical Summary of Common Commands

ssh-agent command, Alphabetical Summary of Common Commands

ssh-keygen command, Alphabetical Summary of Common Commands

stack examination commands (GDB), Examining the Stack

standard input, output, and error

GNU sed, Multiline Input Processing

STDIN, copying, Alphabetical Summary of Common Commands

STDOUT, printing to, Alphabetical Summary of Common Commands

startup files (tcsh), Syntax

state, RCS revisions, Specifying States

status command

CVS, Alphabetical Summary of Commands

svn, Example

status inquiry commands (GDB), Examining the Stack

step command (GDB), Alphabetical Summary of GDB Commands

mode, setting, Summary of set and show Commands

stepi command (GDB), Alphabetical Summary of GDB Commands

stickiness, CVS files, CVS Wrappers

stop command

ex, source

Korn shells, Built-in Commands (Bash and Korn Shells)

tcsh, Built-in Commands

stopping commands (Emacs), Paragraphs and Regions

storage commands, System Status

strace Linux command, Alphabetical Summary of GNU/Linux Commands

stream editor, Alphabetical Summary of Common Commands

strftime function (gawk), Alphabetical Summary of awk Functions and Commands

string searches with apropos, Alphabetical Summary of Common Commands

strings

comparing and searching with expr, Alphabetical Summary of Common Commands

localizing, Alphabetical Summary of Common Commands

printing, using specified formats, Alphabetical Summary of Common Commands

substituting characters in, Alphabetical Summary of Common Commands

strings command, Alphabetical Summary of Common Commands

strip command, Alphabetical Summary of Common Commands

strtonum function (gawk), Escape Sequences, Alphabetical Summary of awk Functions and Commands

stty command, Alphabetical Summary of Common Commands

su command, Alphabetical Summary of Common Commands

sub function (awk), Alphabetical Summary of awk Functions and Commands

subcommands (CVS), common synonyms, Alphabetical Summary of Commands

substitute command (ex), Alphabetical Summary of ex Commands

substitutions, PS1-PS4 variables, Arithmetic Expressions

substr function (awk), Alphabetical Summary of awk Functions and Commands

Subversion, The Subversion Version Control System

"copy, modify, merge" model, Usage Models

basic version control operations, Building a Better CVS

converting repository from CVS, Converting a Repository from CVS to Subversion

file properties, special, Converting a Repository from CVS to Subversion

improvements on CVS design, Building a Better CVS

obtaining, Obtaining Subversion

features in next version, Source Code

releases, Subversion Releases

source code, Source Code

svn (command line client), The Subversion Command Line Client: svn

options, The Subversion Command Line Client: svn

subcommands, svn Subcommands

svnadmin (repository administration), Repository Administration: svnadmin

options, Repository Administration: svnadmin

subcommands, svnadmin Subcommands

svndumpfilter command, Other Subversion Components

svnlook (repository, examining), Examining the Repository: svnlook

options, svnlook Options

subcommands, svnlook Subcommands

svnserve command, Providing Remote Access: svnserve

svnversion command, Other Subversion Components

using for version control, Using Subversion: A Quick Tour

suffix rules (makefile), Makefile Lines

Sun Desktop commands, Useful CDE Programs

suspend command

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

ex, Alphabetical Summary of ex Commands

tcsh, Built-in Commands

sview command (ex), Alphabetical Summary of ex Commands

svn (Subversion command line client), The Subversion Command Line Client: svn

options, The Subversion Command Line Client: svn

subcommands, svn Subcommands

svnadmin (Subversion repository administration), Repository Administration: svnadmin

options, Repository Administration: svnadmin

subcommands, svnadmin Subcommands

svndumpfilter command (Subversion), Other Subversion Components

svnlook (Subversion repository, examining), Examining the Repository: svnlook

options, svnlook Options

subcommands, svnlook Subcommands

svnserve (Subversion repository access), Providing Remote Access: svnserve

SVR4 (System V Release 4), Unix in the 21st Century

switch command

svn, Examples

tcsh, Built-in Commands

symbol file, Conceptual Overview

symbol tables (name list), printing for files, Alphabetical Summary of Common Commands

symbol-file command (GDB), Alphabetical Summary of GDB Commands

synaptic Linux command, The Red Hat Package Manager, Debian Package Manager Command Summary

synchronizing files across a network connection, Alphabetical Summary of Common Commands, Alphabetical Summary of Solaris Commands

system calls, tracing, Alphabetical Summary of Solaris Commands

strace Linux command, Alphabetical Summary of GNU/Linux Commands

system configuration variables, printing, Alphabetical Summary of Common Commands

system dictionary, adding to, Alphabetical Summary of Common Commands

system function (awk), Alphabetical Summary of awk Functions and Commands

system name, current, Alphabetical Summary of Common Commands

system status commands, System Status

system usage information, Alphabetical Summary of Common Commands

printing, Alphabetical Summary of Common Commands

timex (Solaris) command, Alphabetical Summary of Solaris Commands

w command, Alphabetical Summary of Common Commands

System V

Bourne shell, The Bash and Korn Shells

printing commands, Miscellaneous

Release 4 (SVR4), Introduction

systime function (gawk), Alphabetical Summary of awk Functions and Commands

T

t command

ex, Alphabetical Summary of ex Commands

sed, s

T command (sed), Alphabetical Summary of sed Commands

tab characters, xvi

converting spaces to, Alphabetical Summary of Common Commands

expanding to spaces, Alphabetical Summary of Common Commands

tabs

word separators in Bash and ksh, Examples

tabs, word separators in tcsh, Examples

tag command (CVS), Alphabetical Summary of Commands

tag command (ex), Alphabetical Summary of ex Commands

tag files, creating with ctags, Alphabetical Summary of Common Commands

tagging improvements, Subversion, Building a Better CVS

tags command (ex), Alphabetical Summary of ex Commands

tags, naming source code files, Introduction and Terminology

tail command, Alphabetical Summary of Common Commands

talk command, Alphabetical Summary of Common Commands

TAO (track-at-once) mode, Alphabetical Summary of GNU/Linux Commands

tape files, copying/restoring, Alphabetical Summary of Common Commands

tar command, Alphabetical Summary of Common Commands

targets, GNU make, Command-Line Syntax

special names, Special Target Names

tbreak command (GDB), Alphabetical Summary of GDB Commands

tcatch command (GDB), Alphabetical Summary of GDB Commands

tcsh (Tenex C shell), Which Shell Do I Want?, Overview of Features

arithmetic, Expressions

command history, Command History

command substitution, Command Substitution

history modifiers, Printing, substitution, and quoting

special aliases, Special Aliases

word substitution, Word Substitution

command-line manipulation, Completion

completion, Command-Line Manipulation

editing the command line, Command-Line Editing

commands, built-in, Built-in Commands

expressions, Expressions

@ command examples, Examples

if and while statement examples, Examples

operators, Expressions

features differing from Bash and ksh, Differing Features

features in common with Bash and ksh, Shell Source Code URLs

filename metacharacters, Syntax

invocation, options and arguments, Invoking the Shell

job control, Job Control

prompts, Formatting for the Prompt Variable

quoting, Quoting

special characters, Examples

special files, Syntax

syntax, Syntax

redirection, Redirection Forms

variables, Variables

environment variables, Environment Variables

modifiers, Variable Modifiers

predefined shell variables, Predefined Shell Variables

sample .tcshrc file, Sample .tcshrc File

variable substitution, Variables

tcsh command, Alphabetical Summary of Common Commands

tee command, Alphabetical Summary of Common Commands

telltc command (tcsh), Built-in Commands

telnet command, Alphabetical Summary of Common Commands

template file of C #define statements, Alphabetical Summary of Common Commands

temporary filename, generating, Alphabetical Summary of Common Commands

temporary files (RCS), Alphabetical Summary of Commands

terminal emulators, ANSI/VT100, Alphabetical Summary of Common Commands

terminal sessions, recording (script), Alphabetical Summary of Common Commands

terminals

clearing displays, Alphabetical Summary of Common Commands

clearing with reset, Alphabetical Summary of Common Commands

device name, printing, Alphabetical Summary of Common Commands

setting I/O options for current device, Alphabetical Summary of Common Commands

setting modes, Alphabetical Summary of Common Commands

terminating process IDs, Alphabetical Summary of Common Commands

termination status for background processes, Alphabetical Summary of Common Commands

termname command (tcsh), Built-in Commands

test command, Alphabetical Summary of Common Commands, Built-in Commands (Bash and Korn Shells)

text

converting spaces into tabs, Alphabetical Summary of Common Commands

expanding tabs into spaces, Alphabetical Summary of Common Commands

formatting with fmt command, Alphabetical Summary of Common Commands

manipulation with make utility, Text Manipulation with Macros and Functions

text editors

ed, ed

Emacs vs. vi, Completion

nano, nano

pico, pico

regular expression delimiters, Examples of Searching

Unix metacharacters, Metacharacters, Listed by Unix Program

text processing commands, System Status

text to speech synthesizer (say), Alphabetical Summary of Mac OS X Commands

Text User Interface (TUI), Conceptual Overview, Group Listing of GDB Commands

GDB commands for, Text User Interface Commands

thbreak command (GDB), Alphabetical Summary of GDB Commands

thread command (GDB), Alphabetical Summary of GDB Commands

time command, Alphabetical Summary of Common Commands

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

tcsh, Built-in Commands

time zones, Time Zones

times command, Built-in Commands (Bash and Korn Shells)

times command (ksh93), Built-in Commands (Bash and Korn Shells)

timestamps, RCS, Revision Numbering

timex Solaris command, Alphabetical Summary of Solaris Commands

tolower function (awk), Output Redirections

touch command, Alphabetical Summary of Common Commands

toupper function (awk), Output Redirections

tr command, Alphabetical Summary of Common Commands

tracing system calls (strace), Alphabetical Summary of GNU/Linux Commands

track-at-once (TAO) mode, cdrdao

transposing words (sed), Examples of Searching and Replacing

transposition commands (Emacs), Paragraphs and Regions

trap command, Built-in Commands (Bash and Korn Shells)

tree command (svnlook), svnlook Subcommands

trigger scriptlets, The rpm Command

troff program

command-line invocation, Overview of nroff/troff

eliminating .so requests, Alphabetical Summary of Common Commands

escape sequences, Useful Escape Sequences

preprocessing of input files, Alphabetical Summary of Common Commands

special characters, Special Characters

troff command, Alphabetical Summary of Common Commands

true command, Alphabetical Summary of Common Commands, Built-in Commands (Bash and Korn Shells)

truss Solaris command, Alphabetical Summary of Solaris Commands

tset command, Alphabetical Summary of Common Commands

tty command, Alphabetical Summary of Common Commands

GDB, thread

TUI (Text User Interface), Conceptual Overview, Group Listing of GDB Commands

GDB commands for, Text User Interface Commands

tui command (GDB), Alphabetical Summary of GDB Commands

type command, Alphabetical Summary of Common Commands

Bash, true

ksh, Built-in Commands (Bash and Korn Shells)

type-safe linkage, Conceptual Overview

typeset command, Built-in Commands (Bash and Korn Shells)

-A (creating associative arrays), Discipline Functions (ksh93 Only)

-n (indirect variable referencing), Examples

U

u (until) command (GDB), Group Listing of GDB Commands

ulimit command, Built-in Commands (Bash and Korn Shells)

umask command, Alphabetical Summary of Common Commands

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

tcsh, Built-in Commands

umount command, Alphabetical Summary of Common Commands

Linux, Alphabetical Summary of GNU/Linux Commands

Mac OS, Options

Solaris, Alphabetical Summary of Solaris Commands

unabbreviate command (ex), Alphabetical Summary of ex Commands

unalias command

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

tcsh, Built-in Commands

uname command, Alphabetical Summary of Common Commands

uncomplete command (tcsh), Built-in Commands

uncompressing files, Alphabetical Summary of Common Commands

undisplay command (GDB), Alphabetical Summary of GDB Commands

undo command (ex), Alphabetical Summary of ex Commands

undoing commands (Emacs), Paragraphs and Regions

unedit command (CVS), Alphabetical Summary of Commands

unexpand command, Alphabetical Summary of Common Commands

unhash command (tcsh), Built-in Commands

unhide command (ex), Alphabetical Summary of ex Commands

uninstall options (rpm), Uninstall options

uniq command, Alphabetical Summary of Common Commands

units command, Alphabetical Summary of Common Commands

units of measurements (nroff/troff), Example

Unix

summary of common commands, Finding Commands on GNU/Linux and Mac OS X

versions of, Unix in the 21st Century

unix2dos command, Alphabetical Summary of Common Commands

unlimit command (tcsh), Built-in Commands

unmap command (ex), Alphabetical Summary of ex Commands

unset command, Built-in Commands (Bash and Korn Shells)

GDB, Example

tcsh, which

unsetenv command (tcsh), Built-in Commands

until (shell keyword), Built-in Commands (Bash and Korn Shells)

until command (GDB), Alphabetical Summary of GDB Commands

unzip command, Alphabetical Summary of Common Commands

up command (GDB), Alphabetical Summary of GDB Commands

up-silently command (GDB), Alphabetical Summary of GDB Commands

up2date (Red Hat Update Agent), The Red Hat Package Manager, up2date: Red Hat Update Agent

update command

CVS, unedit

GDB, up-silently

svn, Examples

yum, update

upgrade command (yum), up2date: Red Hat Update Agent

upgrade options (rpm), Install, upgrade, and freshen options

upper character class, Examples

uptime command, Alphabetical Summary of Common Commands

URLs

Arch (source code management system), Other Source Code Management Systems

aspell, aspell

autoconf, autoconf

automake, automake

awk source code and GNU gettext, Source Code

Bash, bash, The Bash and Korn Shells

Bash completion, Examples

Bash Debugger, Built-in Shell Variables

Bash source code, Shell Source Code URLs

Bash source code patches, Shell Source Code URLs

bc language (and compiler), Alphabetical Summary of Common Commands

bison, bison

bzip, bzip2

cdrdao (Sourceforge), Alphabetical Summary of GNU/Linux Commands

Codeville (version control system), Other Source Code Management Systems

CSSC (free clone of SCCS), Other Source Code Management Systems

ctags, ctags

CUPS (Common Unix Printing System), Alphabetical Summary of Common Commands

curl, curl

ddd (Data Display Debugger), Source Code Locations

diff, diff

ed, ed

Emacs editor, Conceptual Overview

Figlet, Alphabetical Summary of Common Commands

Fink Commander, Fink and Fink Commander

Fink project, Fink and Fink Commander

flex, flex

gcc, gcc

GCC and precompiled packages (Sun), Solaris

GDB (GNU Debugger), Source Code Locations

gettext, gettext, Source Code

gettextize, gettextize

gprof (GNU), Alphabetical Summary of Common Commands

groff (GNU troff), Overview of nroff/troff

gs (ghostscript), Alphabetical Summary of Common Commands

info, info

Insight debugger, Source Code Locations

ispell, ispell

Korn shell, The Bash and Korn Shells

Korn shell, Public Domain (pdksh), Alphabetical Summary of GNU/Linux Commands, Shell Source Code URLs

ksh93 source code, Shell Source Code URLs

less, less

lynx (text mode) browser, Alphabetical Summary of GNU/Linux Commands

m4 (macro processor), Alphabetical Summary of Common Commands

make program, Conceptual Overview

mawk, Source Code

Monotone (version control system), Other Source Code Management Systems

mutt (Mail User Agent program), Alphabetical Summary of GNU/Linux Commands

nano editor, Alphabetical Summary of Mac OS X Commands

nroff/troff, Overview of nroff/troff

Open Office, ooffice

OpenSSH, ssh

OSXGNU (GNU Mac OS X Public Archive), The GNU Mac OS X Public Archive

patch, patch

perl, perl

python, python

rsync (Samba), Alphabetical Summary of Common Commands

Samba, samba

screen, screen

shells, source code, Shell Source Code URLs

slocate, slocate

Solaris patches, support, Solaris

Solaris, Sun freeware, Building Software

splint, splint

srm (Sourceforge), Alphabetical Summary of Mac OS X Commands

Subversion project site, Obtaining Subversion

sudo, su

tar, tar

tcsh source code, Shell Source Code URLs

tcshrc, Special Files

troff, Introduction

vim editor, Alphabetical Summary of Common Commands, Command-Line Syntax

wget, wget

xgettext, xgettext

Z shell source code, Shell Source Code URLs

ZIP, Options

ZIP (unzip), Alphabetical Summary of Common Commands

usage information, Alphabetical Summary of Common Commands

disk blocks used by directory and subdirectories, Alphabetical Summary of Common Commands

timex (Solaris) command, Alphabetical Summary of Solaris Commands

w command, Alphabetical Summary of Common Commands

user interfaces (GDB), Conceptual Overview

Text User Interface (TUI), Group Listing of GDB Commands

users

changing information for with chpass, Alphabetical Summary of Mac OS X Commands

displaying data about, Alphabetical Summary of Common Commands

displaying group membership, Alphabetical Summary of Common Commands

id command, Alphabetical Summary of Common Commands

information on those logged in, Alphabetical Summary of Common Commands

listing, Alphabetical Summary of Solaris Commands

logged-in, displaying list, Alphabetical Summary of Common Commands

username for user ID, printing, Alphabetical Summary of Common Commands

users command, Alphabetical Summary of Common Commands

UTC (Coordinated Universal Time), Revision Numbering

uudecode command, Alphabetical Summary of Common Commands

uuid command (svnlook), Providing Remote Access: svnserve

V

v command

ex, view

sed, v

vacation Solaris command, Alphabetical Summary of Solaris Commands

value history, The Value History

variable substitution, Variable Substitution

variables

awk

assignment, Variable and Array Assignment

built-in, Simple Pattern-Action Examples

Bash and Korn shells, Variable Substitution

arrays, Arrays

built-in, Examples

discipline functions (ksh93), Discipline Functions (ksh93 Only)

other, Other Shell Variables

special prompt settings, Discipline Functions (ksh93 Only)

convenience variables (GDB), The Value History

CVSROOT directory, CVSROOT Variables

environment variables, Environment Variables in CVSROOT Files

internal variables, Internal Variables in CVSROOT Files

shell variables in files, Internal Variables in CVSROOT Files

setting, Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

system configuration, printing, Alphabetical Summary of Common Commands

tcsh shell, Variables

command-line manipulation, Completion

environment variables, Environment Variables

predefined shell variables, Predefined Shell Variables

prompt variable, formatting, Formatting for the Prompt Variable

sample .tcshrc file, Sample .tcshrc File

variable modifiers, Examples

variable substitution, Variables

verify command (svnadmin), Examining the Repository: svnlook

verify options (rpm), Verify options

version command

CVS, version

ex, view

version control systems

CVS, The Concurrent Versions System

for Unix, Unix Source Code Management Systems

other, Other Source Code Management Systems

RCS, The Revision Control System

Subversion, The Subversion Version Control System

version history, true history in Subversion, Building a Better CVS

versioned metadata, Building a Better CVS

versions of Unix, Unix in the 21st Century

vi editor, Alphabetical Summary of Common Commands, Conceptual Overview

bindings, compared to Emacs bindings, Completion

command mode, Command Mode

command syntax, Review of vi Operations

command-line syntax, Command-Line Syntax

options, Conceptual Overview

commands, vi Commands

configuration, vi Configuration

.exrc file, Command-Line Syntax

.exrc file (example), Example .exrc File

:set command, vi Configuration

:set command options, vi Configuration

edit commands, Edit Commands

changing and deleting text, Edit Commands

copying and moving text, Copying and moving

ex commands in, Syntax of ex Commands

insert mode, Command Mode

interacting with the system, Window Commands (vim)

line-edit mode, Bash and ksh, Line-Edit Mode

macros, Macros

miscellaneous commands, Macros

movement commands, Movement Commands

character, Lines

line numbering, Screens

lines, Lines

marking position, Insert Commands

screens, Screens

searching, Screens

text, Movement Commands

multiple files, accessing, Copying and moving

operating modes, Command-Line Syntax

pattern-matching metacharacters, Metacharacters, Listed by Unix Program

saving and exiting, Copying and moving

starting ex from, Command-Line Options

status line commands, Examples

tcsh command-line editing mode, vi mode

user-defined commands, characters for, Macros

window commands, Window Commands (vim)

view command, Alphabetical Summary of Common Commands

ex, view

vile text editor, Conceptual Overview

vim editor, Command-Line Syntax

command-line options, Command-Line Syntax

evim command, Alphabetical Summary of Common Commands

vim command, Alphabetical Summary of Common Commands

vimdiff command, Alphabetical Summary of Common Commands

visual mode, Visual mode (vim only)

vimdiff command, Alphabetical Summary of Common Commands

visual command (ex), Alphabetical Summary of ex Commands

volcheck Solaris command, Alphabetical Summary of Solaris Commands

vpath statements (makefile), Special Dependencies

vsplit command (ex), Alphabetical Summary of ex Commands

VT100 terminal emulation, enabling, Alphabetical Summary of Common Commands

W

w command, Alphabetical Summary of Common Commands

sed, v

W command (sed), Alphabetical Summary of sed Commands

wait command, Alphabetical Summary of Common Commands

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

tcsh, which

wall command (ex), Alphabetical Summary of ex Commands

watch command

CVS, version

GDB, up-silently

Linux, Alphabetical Summary of GNU/Linux Commands

watchers command (CVS), Alphabetical Summary of Commands

watchlog command (tcsh), Built-in Commands

watchpoints, Conceptual Overview

WAV format, converting CDDA to, Alphabetical Summary of GNU/Linux Commands

wc (word count) command, Alphabetical Summary of Common Commands

wget Linux command, Building Software, Alphabetical Summary of GNU/Linux Commands

whatis command, Alphabetical Summary of Common Commands

GDB, x

whatis database, searching with apropos command, Alphabetical Summary of Common Commands

whatprovides command (yum), up2date: Red Hat Update Agent

whence command (ksh), Built-in Commands (Bash and Korn Shells)

where command

GDB, The GDB Text User Interface, x

tcsh, which

which command, Alphabetical Summary of Common Commands

tcsh, which

while command

awk, tolower

Bash and Korn shells, Built-in Commands (Bash and Korn Shells)

GDB, x

tcsh, Examples, Built-in Commands

whitespace

converting spaces into tabs (unexpand), Alphabetical Summary of Common Commands

expanding tabs into spaces, Alphabetical Summary of Common Commands

space character class, Examples

who command, Alphabetical Summary of Common Commands

whoami command, Alphabetical Summary of Common Commands

whocalls Solaris command, Alphabetical Summary of Solaris Commands

width (format specifiers), Source Code

window (Emacs), Buffer and Window

window commands (Emacs), Window Commands

window size, setting for terminal, Alphabetical Summary of Common Commands

Windows systems, serving Unix filesystems to, Alphabetical Summary of Common Commands

winheight command (GDB), Alphabetical Summary of GDB Commands

wnext command (ex), Alphabetical Summary of ex Commands

word character class, Examples

word count (wc) command, Alphabetical Summary of Common Commands

word separators

Bash and ksh, Examples

tcsh, Quoting

word substitution (tcsh), Word Substitution

word-abbreviation commands (Emacs), Search Commands

wordlist files, Alphabetical Summary of Common Commands

words, automatic completion

in Bash, Examples

in tcsh, Completion

wq command (ex), Alphabetical Summary of ex Commands

wqall command (ex), Alphabetical Summary of ex Commands

write command (ex), Alphabetical Summary of ex Commands

writing to standard output, Alphabetical Summary of Common Commands

X

x command

GDB, x

sed, Alphabetical Summary of sed Commands

X command (ex), Alphabetical Summary of ex Commands

X11 applications under Mac OS X, open-x11

xargs command, Alphabetical Summary of Common Commands

Xcode Tools package, Mac OS X

xdigit character class, Examples

xgettext command, Alphabetical Summary of Common Commands

xit command (ex), Alphabetical Summary of ex Commands

xmlto Linux command, Alphabetical Summary of GNU/Linux Commands

xor function (gawk), Output Redirections

Y

y command (sed), Alphabetical Summary of sed Commands

y editing operator (vi), Review of vi Operations, Edit Commands

yacc command, Alphabetical Summary of Common Commands

yank command

Emacs, Modes

ex, Alphabetical Summary of ex Commands

yanking and putting commands (sed), Basic Editing

youngest command (svnlook), Providing Remote Access: svnserve

Yum (Yellowdog Updater Modified), Yum: Yellowdog Updater Modified

command summary, Yum Command Summary

yum command, The Red Hat Package Manager, Yum: Yellowdog Updater Modified

Z

z command (ex), Alphabetical Summary of ex Commands

zcat command, Alphabetical Summary of Common Commands

zip command, Alphabetical Summary of Common Commands

ZIP format archives, extracting or printing information about, Alphabetical Summary of Common Commands

zipinfo command, Alphabetical Summary of Common Commands

zsh (Z shell), Shell Source Code URLs

Colophon

Our look is the result of reader comments, our own experimentation, and feedback from distribution channels. Distinctive covers complement our distinctive approach to technical topics, breathing personality and life into potentially dry subjects.

The animal on the cover of Unix in a Nutshell, Fourth Edition, is a tarsier, a nocturnal mammal related to the lemur. Its generic name, Tarsius, is derived from the animal's very long ankle bone, the tarsus. The tarsier is a native of the East Indies jungles from Sumatra to the Philippines and Sulawesi, where it lives in the trees, leaping from branch to branch with extreme agility and speed.

A small animal, the tarsier's body is only 6 inches long, followed by a 10-inch tufted tail. It is covered in soft brown or grey silky fur, has a round face, and huge eyes. Its arms and legs are long and slender, as are its digits, which are tipped with rounded, fleshy pads to improve the tarsier's grip on trees. Tarsiers are active only at night, hiding during the day in tangles of vines or in the tops of tall trees. They subsist mainly on insects, and though very curious animals, tend to be loners.

Colleen Gorman was the production editor and the copyeditor for Unix in a Nutshell, Fourth Edition. Genevieve d'Entremont and Mary Brady provided quality control. Ellen Troutman wrote the index.

Edie Freedman designed the cover of this book. The cover image is a 19th-century engraving from the Dover Pictorial Archive. Karen Montgomery produced the cover layout with Adobe InDesign CS using Adobe's ITC Garamond font. The back cover illustration is by J.D. "Illiad" Frazer.

David Futato designed the interior layout. This book was converted by Keith Fahlgren to FrameMaker 5.5.6 with a format conversion tool created by Erik Ray, Jason McIntosh, Neil Walls, and Mike Sierra that uses Perl and XML technologies. The text font is Linotype Birka; the heading font is Adobe Myriad Condensed; and the code font is LucasFont's TheSans Mono Condensed. The illustrations that appear in the book were produced by Robert Romano, Jessamyn Read, and Lesley Borash using Macromedia FreeHand MX and Adobe Photoshop CS. The tip and warning icons were drawn by Christopher Bing. This colophon was written by Michael Kalantarian.