Learning the bash Shell, 3rd Edition

Cameron Newham

Editor

Mike Loukides

Copyright © 2009 O'Reilly Media, Inc.

O'Reilly Media

Preface

The first thing users of the UNIX or Linux operating systems come face to face with is the shell. "Shell" is the UNIX term for a user interface to the system—something that lets you communicate with the computer via the keyboard and the display. Shells are just separate programs that encapsulate the system, and, as such, there are many to choose from.

Systems are usually set up with a "standard" shell that new users adopt without question. However, some of these standard shells are rather old and lack many features of the newer shells. This is a shame, because shells have a large bearing on your working environment. Since changing shells is as easy as changing hats, there is no reason not to change to the latest and greatest in shell technology.

Of the many shells to choose from, this book introduces the Bourne Again shell (bash for short), a modern general-purpose shell. Other useful modern shells are the Korn shell (ksh) and the "Tenex C shell" (tcsh); both are also the subjects of O'Reilly handbooks.

bash Versions

This book is relevant to all versions of bash, although older versions lack some of the features of the most recent version.[1] You can easily find out which version you are using by typing echo $BASH_VERSION. The earliest public version of bash was 1.0, and the most recent is 3.0 (released in July 2004). If you have an older version, you might like to upgrade to the latest one. Chapter 12 shows you how to go about it.

[1] Throughout this book we have clearly marked with footnotes the features that are not present in the earlier versions.

Summary of bash Features

bash is a backward-compatible evolutionary successor to the Bourne shell that includes most of the C shell's major advantages as well as features from the Korn shell and a few new features of its own. Features appropriated from the C shell include:

Directory manipulation, with the pushd, popd, and dirs commands.

Job control, including the fg and bg commands and the ability to stop jobs with CTRL-Z.

Brace expansion, for generating arbitrary strings.

Tilde expansion, a shorthand way to refer to directories.

Aliases, which allow you to define shorthand names for commands or command lines.

Command history, which lets you recall previously entered commands.

bash's major new features include:

Command-line editing, allowing you to use vi- or emacs-style editing commands on your command lines.

Key bindings that allow you to set up customized editing key sequences.

Integrated programming features: the functionality of several external UNIX commands, including test, expr, getopt, and echo, has been integrated into the shell itself, enabling common programming tasks to be done more cleanly and efficiently.

Control structures, especially the select construct, which enables easy menu generation.

New options and variables that give you more ways to customize your environment.

One dimensional arrays that allow easy referencing and manipulation of lists of data.

Dynamic loading of built-ins, plus the ability to write your own and load them into the running shell.

Intended Audience

This book is designed to address casual UNIX and Linux users who are just above the "raw beginner" level. You should be familiar with the process of logging in, entering commands, and doing simple things with files. Although Chapter 1 reviews concepts such as the tree-like file and directory scheme, you may find that it moves too quickly if you're a complete neophyte. In that case, we recommend the O'Reilly handbook, Learning the UNIX Operating System, by Jerry Peek, Grace Todino, and John Strang.

If you're an experienced user, you may wish to skip Chapter 1 altogether. But if your experience is with the C shell, you may find that Chapter 1 reveals a few subtle differences between the bash and C shells.

No matter what your level of experience is, you will undoubtedly learn many things in this book that will make you a more productive bash user—from major features down to details at the "nook-and-cranny" level that you may not have been aware of.

If you are interested in shell programming (writing shell scripts and functions that automate everyday tasks or serve as system utilities), you should also find this book useful. However, we have deliberately avoided drawing a strong distinction between interactive shell use (entering commands during a login session) and shell programming. We see shell programming as a natural, inevitable outgrowth of increasing experience as a user.

Accordingly, each chapter depends on those previous to it, and although the first three chapters are oriented toward interactive use only, subsequent chapters describe interactive, user-oriented features in addition to programming concepts.

This book aims to show you that writing useful shell programs doesn't require a computing degree. Even if you are completely new to computing, there is no reason why you shouldn't be able to harness the power of bash within a short time.

Toward that end, we decided not to spend too much time on features of exclusive interest to low-level systems programmers. Concepts like file descriptors and special file types might only confuse the casual user, and anyway, we figure those of you who understand such things are smart enough to extrapolate the necessary information from our cursory discussions.

Code Examples

This book is full of examples of shell commands and programs designed to be useful in your everyday life as a user, not just to illustrate the feature being explained. In Chapter 4 and onwards, we include various programming problems, which we call tasks, that illustrate particular shell programming concepts. Some tasks have solutions that are refined in subsequent chapters. The later chapters also include programming exercises, many of which build on the tasks in the chapter.

Feel free to use any code you see in this book and to pass it along to friends and colleagues. We especially encourage you to modify and enhance it yourself.

If you want to try examples but you don't use bash as your login shell, you must put the following line at the top of each shell script:

#!/bin/bash

If bash isn't installed as the file /bin/bash, substitute its pathname in the above.

Chapter Summary

If you want to investigate specific topics rather than read the entire book through, here is a chapter-by-chapter summary:

Chapter 1 introduces bash and tells you how to install it as your login shell. Then it surveys the basics of interactive shell use, including overviews of the UNIX file and directory scheme, standard I/O, and background jobs.

Chapter 2 discusses the shell's command history mechanism (including the emacs- and vi-editing modes), history substitution and the fc history command, and key bindings with readline and bind.

Chapter 3 covers ways to customize your shell environment without programming by using the startup and environment files. Aliases, options, and shell variables are the customization techniques discussed.

Chapter 4 is an introduction to shell programming. It explains the basics of shell scripts and functions, and discusses several important "nuts-and-bolts" programming features: string manipulation operators, brace expansion, command-line arguments (positional parameters), and command substitution.

Chapter 5 continues the discussion of shell programming by describing command exit status, conditional expressions, and the shell's flow-control structures: if, for, case, select, while, and until.

Chapter 6 goes into depth about positional parameters and command-line option processing, then discusses special types and properties of variables, integer arithmetic, and arrays.

Chapter 7 gives a detailed description of bash I/O. This chapter covers all of the shell's I/O redirectors, as well as the line-at-a-time I/O commands read and echo. It also discusses the shell's command-line processing mechanism and the eval command.

Chapter 8 covers process-related issues in detail. It starts with a discussion of job control, then gets into various low-level information about processes, including process IDs, signals, and traps. The chapter then moves to a higher level of abstraction to discuss coroutines and subshells.

Chapter 9 discusses various debugging techniques, like trace and verbose modes, and the "fake" signal traps. It then presents in detail a useful shell tool, written using the shell itself: a bash debugger.

Chapter 10 gives information for system administrators, including techniques for implementing system-wide shell customization and features related to system security.

Chapter 11 discusses ways to make bash scripts more maintainable.

Chapter 12 shows you how to go about getting bash and how to install it on your system. It also outlines what to do in the event of problems along the way.

Appendix A compares bash to several similar shells, including the standard Bourne shell, the POSIX shell standard, the Korn shell (ksh), the public-domain Korn shell (pdksh), and the Z Shell (zsh).

Appendix B contains lists of shell invocation options, built-in commands, built-in variables, conditional test operators, options, I/O redirection, and emacs- and vi-editing mode commands.

Appendix C gives information on writing and compiling your own loadable built-ins.

Appendix D looks at the basics of programmable completion.

Conventions Used in This Handbook

We leave it as understood that when you enter a shell command, you press RETURN at the end. RETURN is labeled ENTER on some keyboards.

Characters called CTRL-X, where X is any letter, are entered by holding down the CTRL (or CTL, or CONTROL) key and pressing that letter. Although we give the letter in uppercase, you can press the letter without the SHIFT key.

Other special characters are LINEFEED (which is the same as CTRL-J), BACKSPACE (same as CTRL-H), ESC, TAB, and DEL (sometimes labeled DELETE or RUBOUT).

This book uses the following font conventions:

Italic

Used for UNIX filenames, commands not built into the shell (which are files anyway), and shell functions. Italic is also used for dummy parameters that should be replaced with an actual value, to distinguish the vi and emacs programs from their bash modes, and to highlight special terms the first time they are defined.

Bold

Used for bash built-in commands, aliases, variables, and options, as well as command lines when they are within regular text. Bold is used for all elements typed in by the user within regular text.

Constant Width

Used in examples to show the contents of files or the output from commands.

Constant Bold

Used in examples to show interaction between the user and the shell; any text the user types in is shown in Constant Bold. For example:$ pwd/home/cam/adventure/carrol $

Constant Italic

Used in displayed command lines for dummy parameters that should be replaced with an actual value.

Square Brackets

Used in Chapter 2 to show the position of the cursor on the command line being edited. For example:grep -l Alice < ~cam/book/[a]iw

We use UNIX as a shorthand for "UNIX and Linux." Purists will correctly insist that Linux is not UNIX—but as far as this book is concerned, they behave identically.

We'd Like to Hear from You

Please address comments and questions concerning this book to the publisher:

O'Reilly Media, Inc.

1005 Gravenstein Highway North

Sebastopol, CA 95472

(800) 998-9938 (in the United States or Canada)

(707) 829-0515 (international or local)

(707) 829-0104 (fax)

We have a web page for this book, where we list errata, examples, and any additional information. You can access this page at:

http://www.oreilly.com/catalog/bash3

To comment or ask technical questions about this book, send email to:

bookquestions@oreilly.com

For more information about our books, conferences, Resource Centers, and the O'Reilly Network, see our web site at:

http://www.oreilly.com

Using Code Examples

This book is here to help you get your job done. In general, you may use the code in this book in your programs and documentation. You do not need to contact us for permission unless you're reproducing a significant portion of the code. For example, writing a program that uses several chunks of code from this book does not require permission. Selling or distributing a CD-ROM of examples from O'Reilly books does require permission. Answering a question by citing this book and quoting example code does not require permission. Incorporating a significant amount of example code from this book into your product's documentation does require permission.

We appreciate, but do not require, attribution. An attribution usually includes the title, author, publisher, and ISBN. For example "Learning the bash Shell, Third Edition, by Cameron Newham and Bill Rosenblatt. Copyright 2005 O'Reilly Media, Inc., 0-596-00965-8."

Safari Enabled

When you see a Safari® Enabled icon on the cover of your favorite technology book, that means the book is available online through the O'Reilly Network Safari Bookshelf.

Safari offers a solution that's better than e-books. It's a virtual library that lets you easily search thousands of top tech books, cut and paste code samples, download chapters, and find quick answers when you need the most accurate, current information. Try it for free at http://safari.oreilly.com.

Acknowledgments for the First Edition

This project has been an interesting experience and wouldn't have been possible without the help of a number of people. Firstly, I'd like to thank Brian Fox and Chet Ramey for creating bash and making it the polished product it is today. Thanks also to Chet Ramey for promptly answering all of my questions on bash and pointing out my errors.

Many thanks to Bill Rosenblatt for Learning the korn Shell, on which this book is based; Michael O'Reilly and Michael Malone at iiNet Technologies for their useful comments and suggestions (and my net.connection!); Chris Thorne, Justin Twiss, David Quin-Conroy, and my mum for their comments, suggestions, and corrections; Linus Torvalds for the Linux operating system which introduced me to bash and was the platform for all of my work on the book; Brian Fox for providing a short history of bash; David Korn for information on the latest Korn shell. Thanks also to Depeche Mode for "101" as a backdrop while I worked, Laurence Durbridge for being a likable pest and never failing to ask "Finished the book yet?" and Adam (for being in my book).

The sharp eyes of our technical reviewers picked up many mistakes. Thanks to Matt Healy, Chet Ramey, Bill Reynolds, Bill Rosenblatt, and Norm Walsh for taking time out to go through the manuscript.

The crew at O'Reilly were indispensable in getting this book out the door. I'd like to thank Lenny Muellner for providing me with the formatting tools for the job, Chris Reilley for the figures, and Edie Freedman for the cover design. On the production end, I'd like to thank David Sewell for his copyediting, Clairemarie Fisher O'Leary for managing the production process, Michael Deutsch and Jane Ellin for their production assistance, Ellen Siever for tools support, Kismet McDonough for providing quality assurance, and Seth Maislin for the index.

I'm grateful to Frank Willison for taking me up on my first piece of email to ORA: "What about a book on bash?"

Last but by no means least, a big thank you to my editor, Mike Loukides, who helped steer me through this project.

Acknowledgments for the Second Edition

Thanks to all the people at O'Reilly. Gigi Estabrook was the editor for the second edition. Nicole Gipson Arigo was the production editor and project manager. Nancy Wolfe Kotary and Ellie Fountain Maden performed quality control checks. Seth Maislin wrote the index. Edie Freedman designed the cover, and Nancy Priest designed the interior format of the book. Lenny Muellner implemented the format in troff. Robert Romano updated the illustrations for the second edition.

Acknowledgments for the Third Edition

Thanks to the production people at O'Reilly and to the indexer.

Thanks to Chet Ramey for once again swiftly answering my queries on bash and for providing helpful comments on the book. I'd also like to thank Ian Macdonald for his feedback on Programmable Completion.

Chapter 1. bash Basics

Since the early 1970s, when it was first created, the UNIX operating system has become more and more popular. During this time it has branched out into different versions, and taken on such names as Ultrix, AIX, Xenix, SunOS, and Linux. Starting on minicomputers and mainframes, it has moved onto desktop workstations and even personal computers used at work and home. No longer a system used only by academics and computing wizards at universities and research centers, UNIX is used in many businesses, schools, and homes. As time goes on, more people will come into contact with UNIX.

You may have used UNIX at your school, office, or home to run your applications, print documents, and read your electronic mail. But have you ever thought about the process that happens when you type a command and hit RETURN?

Several layers of events take place whenever you enter a command, but we're going to consider only the top layer, known as the shell. Generically speaking, a shell is any user interface to the UNIX operating system, i.e., any program that takes input from the user, translates it into instructions that the operating system can understand, and conveys the operating system's output back to the user. Figure 1-1 shows the relationship between user, shell, and operating system.

Figure 1-1. The shell is a layer around the UNIX operating system

There are various types of user interfaces. bash belongs to the most common category, known as character-based user interfaces. These interfaces accept lines of textual commands that the user types in; they usually produce text-based output. Other types of interfaces include the increasingly common graphical user interfaces (GUI), which add the ability to display arbitrary graphics (not just typewriter characters) and to accept input from a mouse or other pointing device, touch-screen interfaces (such as those on some bank teller machines), and so on.

What Is a Shell?

The shell's job, then, is to translate the user's command lines into operating system instructions. For example, consider this command line:

sort -n phonelist > phonelist.sorted

This means, "Sort lines in the file phonelist in numerical order, and put the result in the file phonelist.sorted." Here's what the shell does with this command:

Breaks up the line into the pieces sort, -n, phonelist, >, and phonelist.sorted. These pieces are called words.

Determines the purpose of the words: sort is a command, -n and phonelist are arguments, and > and phonelist.sorted, taken together, are I/O instructions.

Sets up the I/O according to > phonelist.sorted (output to the file phone list.sorted) and some standard, implicit instructions.

Finds the command sort in a file and runs it with the option -n (numerical order) and the argument phonelist (input filename).

Of course, each of these steps really involves several substeps, each of which includes a particular instruction to the underlying operating system.

Remember that the shell itself is not UNIX—just the user interface to it. UNIX is one of the first operating systems to make the user interface independent of the operating system.

Scope of This Book

In this book you will learn about bash, which is one of the most recent and powerful of the major UNIX shells. There are two ways to use bash: as a user interface and as a programming environment.

This chapter and the next cover interactive use. These two chapters should give you enough background to use the shell confidently and productively for most of your everyday tasks.

After you have been using the shell for a while, you will undoubtedly find certain characteristics of your environment (the shell's "look and feel") that you would like to change, and tasks that you would like to automate. Chapter 3 shows several ways of doing this.

Chapter 3 also prepares you for shell programming, the bulk of which is covered in Chapter 4 through Chapter 6. You need not have any programming experience to understand these chapters and learn shell programming. Chapter 7 and Chapter 8 give more complete descriptions of the shell's I/O and process-handling capabilities, while Chapter 9 discusses various techniques for debugging shell programs.

You'll learn a lot about bash in this book; you'll also learn about UNIX utilities and the way the UNIX operating system works in general. It's possible to become a virtuoso shell programmer without any previous programming experience. At the same time, we've carefully avoided going into excessive detail about UNIX internals. We maintain that you shouldn't have to be an internals expert to use and program the shell effectively, and we won't dwell on the few shell features that are intended specifically for low-level systems programmers.

History of UNIX Shells

The independence of the shell from the UNIX operating system per se has led to the development of dozens of shells throughout UNIX history—although only a few have achieved widespread use.

The first major shell was the Bourne shell (named after its inventor, Steven Bourne); it was included in the first popular version of UNIX, Version 7, starting in 1979. The Bourne shell is known on the system as sh. Although UNIX has gone through many, many changes, the Bourne shell is still popular and essentially unchanged. Several UNIX utilities and administration features depend on it.

The first widely used alternative shell was the C shell, or csh. This was written by Bill Joy at the University of California at Berkeley as part of the Berkeley Software Distribution (BSD) version of UNIX that came out a couple of years after Version 7.

The C shell gets its name from the resemblance of its commands to statements in the C Programming Language, which makes the shell easier for programmers on UNIX systems to learn. It supports a number of operating system features (e.g., job control; see Chapter 8) that were unique to BSD UNIX but by now have migrated to most other modern versions. It also has a few important features (e.g., aliases; see Chapter 3) that make it easier to use in general.

In recent years a number of other shells have become popular. The most notable of these is the Korn shell. This shell is a commercial product that incorporates the best features of the Bourne and C shells, plus many features of its own.[1] The Korn shell is similar to bash in most respects; both have an abundance of features that make them easy to work with. The advantage of bash is that it is free. For further information on the Korn shell see Appendix A.

The Bourne Again Shell

The Bourne Again shell (named in punning tribute to Steve Bourne's shell) was created for use in the GNU project.[2] The GNU project was started by Richard Stallman of the Free Software Foundation (FSF) for the purpose of creating a UNIX-compatible operating system and replacing all of the commercial UNIX utilities with freely distributable ones. GNU embodies not only new software utilities, but a new distribution concept: the copyleft. Copylefted software may be freely distributed so long as no restrictions are placed on further distribution (for example, the source code must be made freely available).

bash, intended to be the standard shell for the GNU system, was officially "born" on Sunday, January 10, 1988. Brian Fox wrote the original versions of bash and readline and continued to improve the shell up until 1993. Early in 1989 he was joined by Chet Ramey, who was responsible for numerous bug fixes and the inclusion of many useful features. Chet Ramey is now the official maintainer of bash and continues to make further enhancements.

In keeping with the GNU principles, all versions of bash since 0.99 have been freely available from the FSF. bash has found its way onto every major version of UNIX and is rapidly becoming the most popular Bourne shell derivative. It is the standard shell included with Linux, a widely used free UNIX operating system, and Apple's Mac OS X.

In 1995 Chet Ramey began working on a major new release, 2.0, which was released to the public for the first time on December 23, 1996. bash 2.0 added a range of new features to the old release (the one before being 1.14.7) and brought the shell into better compliance with various standards. bash 3.0 improves on the previous version and rounds out the feature list and standards compliance.

This book describes bash 3.0. It is applicable to all previous releases of bash. Any features of the current release that are different in, or missing from, previous releases will be noted in the text.

Features of bash

Although the Bourne shell is still known as the "standard" shell, bash is becoming increasingly popular. In addition to its Bourne shell compatibility, it includes the best features of the C and Korn shells as well as several advantages of its own.

bash's command-line editing modes are the features that tend to attract people to it first. With command-line editing, it's much easier to go back and fix mistakes or modify previous commands than it is with the C shell's history mechanism—and the Bourne shell doesn't let you do this at all.

The other major bash feature that is intended mostly for interactive users is job control. As Chapter 8 explains, job control gives you the ability to stop, start, and pause any number of commands at the same time. This feature was borrowed almost verbatim from the C shell.

The rest of bash's important advantages are meant mainly for shell customizers and programmers. It has many new options and variables for customization, and its programming features have been significantly expanded to include function definition, more control structures, integer arithmetic, advanced I/O control, and more.

[1] The Korn shell can be downloaded for free but it comes with a license that will require payment if the shell is used in certain situations.

[2] GNU is a recursive acronym, standing for "GNU's Not UNIX."

Getting bash

You may or may not be using bash right now. Your system administrator probably set your account up with whatever shell he uses as the "standard" on the system. You may not even have been aware that there is more than one shell available.

Yet it's easy for you to determine which shell you are using. Log in to your system and type echo $SHELL at the prompt. You will see a response containing sh, csh, ksh, or bash; these denote the Bourne, C, Korn, and bash shells, respectively. (There's also a chance that you're using another shell such as tcsh.)

If you aren't using bash and you want to, then you first need to find out if it exists on your system. Just type bash. If you get a new prompt consisting of some information followed by a dollar sign (e.g., bash3 $ ), then all is well; type exit to go back to your normal shell.

If you get a "not found" message, your system may not have it. Ask your system administrator or another knowledgeable user; there's a chance that you might have some version of bash installed on the system in a place (directory) that is not normally accessible to you. If not, read Chapter 11 to find out how you can obtain a version of bash.

Once you know you have bash on your system, you can invoke it from whatever other shell you use by typing bash as above. However, it's much better to install it as your login shell, i.e., the shell that you get automatically whenever you log in. You may be able to do the installation by yourself. Here are instructions that are designed to work on the widest variety of UNIX systems. If something doesn't work (e.g., you type in a command and get a "not found" error message or a blank line as the response), you'll have to abort the process and see your system administrator. Alternatively, turn to Chapter 12 where we demonstrate a less straightforward way of replacing your current shell.

You need to find out where bash is on your system, i.e., in which directory it's installed. You might be able to find the location by typing whereis bash (especially if you are using the C shell); if that doesn't work, try whence bash, which bash, or this complex command:[3]

grep bash /etc/passwd | awk -F: '{print $7}' | sort -u

You should see a response that looks like /bin/bash or /usr/local/bin/bash.

To install bash as your login shell, type chsh bash-name, where bash-name is the response you got to your whereis command (or whatever worked). For example:

% chsh /usr/local/bin/bash

You'll either get an error message saying that the shell is invalid, or you'll be prompted for your password.[4] Type in your password, then log out and log back in again to start using bash.

[3] Make sure you use the correct quotation mark in this command: ' rather than `.

[4] For system security reasons, only certain programs are allowed to be installed as login shells.

Interactive Shell Use

When you use the shell interactively, you engage in a login session that begins when you log in and ends when you type exit or logout or press CTRL-D. [5] During a login session, you type in command lines to the shell; these are lines of text ending in RETURN that you type in to your terminal or workstation.

By default, the shell prompts you for each command with an information string followed by a dollar sign, though as you will see in Chapter 3, the entire prompt can be changed.

Commands, Arguments, and Options

Shell command lines consist of one or more words, which are separated on a command line by blanks or TABs. The first word on the line is the command. The rest (if any) are arguments (also called parameters) to the command, which are names of things on which the command will act.

For example, the command line lp myfile consists of the command lp (print a file) and the single argument myfile. lp treats myfile as the name of a file to print. Arguments are often names of files, but not necessarily: in the command line mail cam, the mail program treats cam as the username to which a message will be sent.

An option is a special type of argument that gives the command specific information on what it is supposed to do. Options usually consist of a dash followed by a letter; we say "usually" because this is a convention rather than a hard-and-fast rule. The command lp -h myfile contains the option -h, which tells lp not to print the "banner page" before it prints the file.

Sometimes options take their own arguments. For example, lp -d lp1 -h myfile has two options and one argument. The first option is -d lp1, which means "Send the output to the printer (destination) called lp1." The second option and argument are the same as in the previous example.

[5] The shell can be set up so that it ignores a single CTRL-D to end the session. We recommend doing this, because CTRL-D is too easy to type by accident. See the section on options in Chapter 3 for further details.

Files

Although arguments to commands aren't always files, files are the most important types of "things" on any UNIX system. A file can contain any kind of information, and indeed there are different types of files. Three types are by far the most important:

Regular files

Also called text files; these contain readable characters. For example, this book was created from several regular files that contain the text of the book plus human-readable formatting instructions to the troff word processor.

Executable files

Also called programs; these are invoked as commands. Some can't be read by humans; others—the shell scripts that we'll examine in this book—are just special text files. The shell itself is a (non-human-readable) executable file called bash.

Directories

These are like folders that contain other files—possibly other directories (called subdirectories).

Directories

Let's review the most important concepts about directories. The fact that directories can contain other directories leads to a hierarchical structure, more popularly known as a tree, for all files on a UNIX system.

Figure 1-1 shows part of a typical directory tree; rectangles are directories and ovals are regular files.

Figure 1-2. A tree of directories and files

The top of the tree is a directory called root that has no name on the system.[6] All files can be named by expressing their location on the system relative to root; such names are built by listing all of the directory names (in order from root), separated by slashes (/), followed by the file's name. This way of naming files is called a full (or absolute) pathname.

For example, say there is a file called aaiw that is in the directory book, which is in the directory cam, which is in the directory home, which is in the root directory. This file's full pathname is /home/cam/book/aaiw.

The working directory

Of course, it's annoying to have to use full pathnames whenever you need to specify a file. So there is also the concept of the working directory (sometimes called the current directory), which is the directory you are "in" at any given time. If you give a pathname with no leading slash, then the location of the file is worked out relative to the working directory. Such pathnames are called relative pathnames; you'll use them much more often than full pathnames.

When you log in to the system, your working directory is initially set to a special directory called your home (or login) directory. System administrators often set up the system so that everyone's home directory name is the same as their login name, and all home directories are contained in a common directory under root.

For example, /home/cam is a typical home directory. If this is your working directory and you give the command lp memo, then the system looks for the file memo in /home/cam. If you have a directory called hatter in your home directory, and it contains the file teatime, then you can print it with the command lp hatter/teatime.

Tilde notation

As you can well imagine, home directories occur often in pathnames. Although many systems are organized so that all home directories have a common parent (such as /home or /users), you should not rely on that being the case, nor should you even have to know the absolute pathname of someone's home directory.

Therefore, bash has a way of abbreviating home directories: just precede the name of the user with a tilde (~). For example, you could refer to the file story in user alice's home directory as ~alice/story. This is an absolute pathname, so it doesn't matter what your working directory is when you use it. If alice's home directory has a subdirectory called adventure and the file is in there instead, you can use ~alice/adventure/story as its name.

Even more convenient, a tilde by itself refers to your own home directory. You can refer to a file called notes in your home directory as ~/notes (note the difference between that and ~notes, which the shell would try to interpret as user notes's home directory). If notes is in your adventure subdirectory, then you can call it ~/adventure/notes. This notation is handiest when your working directory is not in your home directory tree, e.g., when it's some system directory like /tmp.

Changing working directories

If you want to change your working directory, use the command cd. If you don't remember your working directory, the command pwd tells the shell to print it.

cd takes as an argument the name of the directory you want to become your working directory. It can be relative to your current directory, it can contain a tilde, or it can be absolute (starting with a slash). If you omit the argument, cd changes to your home directory (i.e., it's the same as cd ~ ).

Table 1-1 gives some sample cd commands. Each command assumes that your working directory is /home/cam just before the command is executed, and that your directory structure looks like Figure 1-1.

Table 1-1. Sample cd commands

Command

New working directory

cd book

/home/cam/book

cd book/wonderland

/home/cam/book/wonderland

cd ~/book/wonderland

/home/cam/book/wonderland

cd /usr/lib

/usr/lib

cd ..

/home

cd ../gryphon

/home/gryphon

cd ~gryphon

/home/gryphon

The first four are straightforward. The next two use a special directory called .. (two dots), which means "parent of this directory." Every directory has one of these; it's a universal way to get to the directory above the current one in the hierarchy—which is called the parent directory.[7]

Another feature of bash's cd command is the form cd -, which changes to whatever directory you were in before the current one. For example, if you start out in /usr/lib, type cd without an argument to go to your home directory, and then type cd -, you will be back in /usr/lib.

Filenames, Wildcards, and Pathname Expansion

Sometimes you need to run a command on more than one file at a time. The most common example of such a command is ls, which lists information about files. In its simplest form, without options or arguments, it lists the names of all files in the working directory except special hidden files, whose names begin with a dot (.).

If you give ls filename arguments, it will list those files—which is sort of silly: if your current directory has the files duchess and queen in it and you type ls duchess queen, the system will simply print those filenames.

Actually, ls is more often used with options that tell it to list information about the files, like the -l (long) option, which tells ls to list the file's owner, size, time of last modification, and other information, or -a (all), which also lists the hidden files described above. But sometimes you want to verify the existence of a certain group of files without having to know all of their names; for example, if you use a text editor, you might want to see which files in your current directory have names that end in .txt.

Filenames are so important in UNIX that the shell provides a built-in way to specify the pattern of a set of filenames without having to know all of the names themselves. You can use special characters, called wildcards, in filenames to turn them into patterns. Table 1-2 lists the basic wildcards.

Table 1-2. Basic wildcards

Wildcard

Matches

?

Any single character

*

Any string of characters

[set]

Any character in set

[! set]

Any character not in set

The ? wildcard matches any single character, so that if your directory contains the files program.c, program.log, and program.o, then the expression program.? matches program.c and program.o but not program.log.

The asterisk (*) is more powerful and far more widely used; it matches any string of characters. The expression program.* will match all three files in the previous paragraph; text editor users can use the expression *.txt to match their input files.[8]

Table 1-3 should help demonstrate how the asterisk works. Assume that you have the files bob, darlene, dave, ed, frank, and fred in your working directory.

Table 1-3. Using the * wildcard

Expression

Yields

fr*

frank fred

*ed

ed fred

b*

bob

*e*

darlene dave ed fred

*r*

darlene frank fred

*

bob darlene dave ed frank fred

d*e

darlene dave

g*

g*

Notice that * can stand for nothing: both *ed and *e* match ed. Also notice that the last example shows what the shell does if it can't match anything: it just leaves the string with the wildcard untouched.

The remaining wildcard is the set construct. A set is a list of characters (e.g., abc), an inclusive range (e.g., a-z), or some combination of the two. If you want the dash character to be part of a list, just list it first or last. Table 1-4 should explain things more clearly.

Table 1-4. Using the set construct wildcards

Expression

Matches

[abc]

a, b, or c

[.,;]

Period, comma, or semicolon

[-_]

Dash or underscore

[a-c]

a, b, or c

[a-z]

All lowercase letters

[!0-9]

All non-digits

[0-9!]

All digits and exclamation point

[a-zA-Z]

All lower- and uppercase letters

[a-zA-Z0-9_-]

All letters, all digits, underscore, and dash

In the original wildcard example, program.[co] and program.[a-z] both match program.c and program.o, but not program.log.

An exclamation point after the left bracket lets you "negate" a set. For example, [!.;] matches any character except period and semicolon; [!a-zA-Z] matches any character that isn't a letter. To match ! itself, place it after the first character in the set, or precede it with a backslash, as in [\!].

The range notation is handy, but you shouldn't make too many assumptions about what characters are included in a range. It's safe to use a range for uppercase letters, lowercase letters, digits, or any subranges thereof (e.g., [f-q], [2-6]). Don't use ranges on punctuation characters or mixed-case letters: e.g., [a-Z] and [A-z] should not be trusted to include all of the letters and nothing more. The problem is that such ranges are not entirely portable between different types of computers.[9]

The process of matching expressions containing wildcards to filenames is called wildcard expansion or globbing. This is just one of several steps the shell takes when reading and processing a command line; another that we have already seen is tilde expansion, where tildes are replaced with home directories where applicable. We'll see others in later chapters, and the full details of the process are enumerated in Chapter 7.

However, it's important to be aware that the commands that you run only see the results of wildcard expansion. That is, they just see a list of arguments, and they have no knowledge of how those arguments came into being. For example, if you type ls fr* and your files are as on the previous page, then the shell expands the command line to ls fred frank and invokes the command ls with arguments fred and frank. If you type ls g*, then (because there is no match) ls will be given the literal string g* and will complain with the error message, g*: No such file or directory.[10]

Here is an example that should help make things clearer. Suppose you are a C programmer. This means that you deal with files whose names end in .c (programs, also known as source files), .h (header files for programs), and .o (object code files that aren't human-readable), as well as other files. Let's say you want to list all source, object, and header files in your working directory. The command ls *.[cho] does the trick. The shell expands *.[cho] to all files whose names end in a period followed by a c, h, or o and passes the resulting list to ls as arguments. In other words, ls will see the filenames just as if they were all typed in individually—but notice that we required no knowledge of the actual filenames whatsoever! We let the wildcards do the work.

The wildcard examples that we have seen so far are actually part of a more general concept called pathname expansion. Just as it is possible to use wildcards in the current directory, they can also be used as part of a pathname. For example, if you wanted to list all of the files in the directories /usr and /usr2, you could type ls /usr*. If you were only interested in the files beginning with the letters b and e in these directories, you could type ls /usr*/[be]* to list them.

Brace Expansion

A concept closely related to pathname expansion is brace expansion. Whereas pathname expansion wildcards will expand to files and directories that exist, brace expansion expands to an arbitrary string of a given form: an optional preamble, followed by comma-separated strings between braces, and followed by an optional postscript. If you type echo b{ed,olt,ar}s, you'll see the words beds, bolts, and bars printed. Each instance of a string inside the braces is combined with the preamble b and the postscript s. Notice that these are not filenames—the strings produced are independent of filenames. It is also possible to nest the braces, as in b{ar{d,n,k},ed}s. This will result in the expansion bards, barns, barks, and beds.

You can also use a slightly different type of brace expansion for creating a sequence of letters or numbers. If you type echo {2..5} you'll see this expands to 2 3 4 5. Typing echo {d..h} results in the expansion d e f g h.[11]

Brace expansion can also be used with wildcard expansions. In the example from the previous section where we listed the source, object, and header files in the working directory, we could have used ls *.{c,h,o}.[12]

[6] Most UNIX tutorials say that root has the name /. We stand by this alternative explanation because it is more logically consistent with the rest of the UNIX filename conventions.

[7] Each directory also has the special directory . (single dot), which just means "this directory." Thus, cd . effectively does nothing. Both . and .. are actually special hidden files in each directory that point to the directory itself and to its parent directory, respectively. root is its own parent.

[8] MS-DOS and VAX/VMS users should note that there is nothing special about the dot (.) in UNIX filenames (aside from the leading dot, which "hides" the file); it's just another character. For example, ls * lists all files in the current directory; you don't need *.* as you do on other systems. Indeed, ls *.* won't list all the files—only those that have at least one dot in the middle of the name.

[9] Specifically, ranges depend on the character encoding scheme your computer uses (normally ASCII, but IBM mainframes use EBCDIC) and the character set used by the current locale (ranges in languages other than English may not give expected results).

[10] This is different from the C shell's wildcard mechanism, which prints an error message and doesn't execute the command at all.

[11] This form of brace expansion is not available in bash prior to Version 3.0.

[12] This differs slightly from C shell brace expansion. bash requires at least one unquoted comma to perform an expansion; otherwise, the word is left unchanged, e.g., b{o}lt remains as b{o}lt.

Input and Output

The software field—really, any scientific field—tends to advance most quickly and impressively on those few occasions when someone (i.e., not a committee) comes up with an idea that is small in concept yet enormous in its implications. The standard input and output scheme of UNIX has to be on the short list of such ideas, along with such classic innovations as the LISP language, the relational data model, and object-oriented programming.

The UNIX I/O scheme is based on two dazzlingly simple ideas. First, UNIX file I/O takes the form of arbitrarily long sequences of characters (bytes). In contrast, file systems of older vintage have more complicated I/O schemes (e.g., "block," "record," "card image," etc.). Second, everything on the system that produces or accepts data is treated as a file; this includes hardware devices like disk drives and terminals. Older systems treated every device differently. Both of these ideas have made systems programmers' lives much more pleasant.

Standard I/O

By convention, each UNIX program has a single way of accepting input called standard input, a single way of producing output called standard output, and a single way of producing error messages called standard error output, usually shortened to standard error. Of course, a program can have other input and output sources as well, as we will see in Chapter 7.

Standard I/O was the first scheme of its kind that was designed specifically for interactive users at terminals, rather than the older batch style of use that usually involved decks of punch-cards. Since the UNIX shell provides the user interface, it should come as no surprise that standard I/O was designed to fit in very neatly with the shell.

All shells handle standard I/O in basically the same way. Each program that you invoke has all three standard I/O channels set to your terminal or workstation, so that standard input is your keyboard, and standard output and error are your screen or window. For example, the mail utility prints messages to you on the standard output, and when you use it to send messages to other users, it accepts your input on the standard input. This means that you view messages on your screen and type new ones in on your keyboard.

When necessary, you can redirect input and output to come from or go to a file instead. If you want to send the contents of a pre-existing file to someone as mail, you redirect mail's standard input so that it reads from that file instead of your keyboard.

You can also hook programs together in a pipeline, in which the standard output of one program feeds directly into the standard input of another; for example, you could feed mail output directly to the lp program so that messages are printed instead of shown on the screen.

This makes it possible to use UNIX utilities as building blocks for bigger programs. Many UNIX utility programs are meant to be used in this way: they each perform a specific type of filtering operation on input text. Although this isn't a textbook on UNIX utilities, they are essential to productive shell use. The more popular filtering utilities are listed in Table 1-5.

Table 1-5. Popular UNIX data filtering utilities

Utility

Purpose

cat

Copy input to output

grep

Search for strings in the input

sort

Sort lines in the input

cut

Extract columns from input

sed

Perform editing operations on input

tr

Translate characters in the input to other characters

You may have used some of these before and noticed that they take names of input files as arguments and produce output on standard output. You may not know, however, that all of them (and most other UNIX utilities) accept input from standard input if you omit the argument.[13]

For example, the most basic utility is cat, which simply copies its input to its output. If you type cat with a filename argument, it will print out the contents of that file on your screen. But if you invoke it with no arguments, it will expect standard input and copy it to standard output. Try it: cat will wait for you to type a line of text; when you type RETURN, cat will repeat the text back to you. To stop the process, hit CTRL-D at the beginning of a line. You will see ^D when you type CTRL-D. Here's what this should look like:

$ cat
               Here is a line of text.
Here is a line of text.
This is another line of text.
This is another line of text.
^D
$

I/O Redirection

cat is short for "catenate," i.e., link together. It accepts multiple filename arguments and copies them to the standard output. But let's pretend, for now, that cat and other utilities don't accept filename arguments and accept only standard input. As we said above, the shell lets you redirect standard input so that it comes from a file. The notation command < filename does this; it sets things up so that command takes standard input from a file instead of from a terminal.

For example, if you have a file called cheshire that contains some text, then cat < cheshire will print cheshire's contents out onto your terminal. sort < cheshire will sort the lines in the cheshire file and print the result on your terminal (remember: we're pretending that these utilities don't take filename arguments).

Similarly, command > filename causes the command's standard output to be redirected to the named file. The classic "canonical" example of this is date > now: the date command prints the current date and time on the standard output; the previous command saves it in a file called now.

Input and output redirectors can be combined. For example: the cp command is normally used to copy files; if for some reason it didn't exist or was broken, you could use cat in this way:

$ cat <
               file1
               >
               file2

This would be similar to cp file1 file2.

Pipelines

It is also possible to redirect the output of a command into the standard input of another command instead of a file. The construct that does this is called the pipe, notated as |. A command line that includes two or more commands connected with pipes is called a pipeline.

Pipes are very often used with the more command, which works just like cat except that it prints its output screen by screen, pausing for the user to type SPACE (next screen), RETURN (next line), or other commands. If you're in a directory with a large number of files and you want to see details about them, ls -l | more will give you a detailed listing a screen at a time.

Pipelines can get very complex, and they can also be combined with other I/O directors. To see a sorted listing of the file cheshire a screen at a time, type sort < cheshire | more. To print it instead of viewing it on your terminal, type sort < cheshire | lp.

Here's a more complicated example. The file /etc/passwd stores information about users' accounts on a UNIX system. Each line in the file contains a user's login name, user ID number, encrypted password, home directory, login shell, and other information. The first field of each line is the login name; fields are separated by colons (:). A sample line might look like this:

cam:LM1c7GhNesD4GhF3iEHrH4FeCKB/:501:100:Cameron Newham:/home/cam:/bin/bash

To get a sorted listing of all users on the system, type:

$ cut -d: -f1 < /etc/passwd | sort

(Actually, you can omit the <, since cut accepts input filename arguments.) The cut command extracts the first field (-f1), where fields are separated by colons (-d:), from the input. The entire pipeline will print a list that looks like this:

adm
bin
cam
daemon
davidqc
ftp
games
gonzo
...

If you want to send the list directly to the printer (instead of your screen), you can extend the pipeline like this:

$ cut -d: -f1 < /etc/passwd | sort | lp

Now you should see how I/O directors and pipelines support the UNIX building block philosophy. The notation is extremely terse and powerful. Just as important, the pipe concept eliminates the need for messy temporary files to store command output before it is fed into other commands.

For example, to do the same sort of thing as the above command line on other operating systems (assuming that equivalent utilities are available...), you need three commands. On DEC's VAX/VMS system, they might look like this:

$ cut [etc]passwd /d=":" /f=1 /out=temp1
$ sort temp1 /out=temp2
$ print temp2
$ delete temp1 temp2

After sufficient practice, you will find yourself routinely typing in powerful command pipelines that do in one line what it would take several commands (and temporary files) in other operating systems to accomplish.

[13] If a particular UNIX utility doesn't accept standard input when you leave out the filename argument, try using a dash (-) as the argument. Some UNIX systems provide standard input as a file, so you could try providing the file /dev/stdin as the input file argument.

Background Jobs

Pipes are actually a special case of a more general feature: doing more than one thing at a time. This is a capability that many other commercial operating systems don't have, because of the rigid limits that they tend to impose upon users. UNIX, on the other hand, was developed in a research lab and meant for internal use, so it does relatively little to impose limits on the resources available to users on a computer—as usual, leaning towards uncluttered simplicity rather than overcomplexity.

"Doing more than one thing at a time" means running more than one program at the same time. You do this when you invoke a pipeline; you can also do it by logging on to a UNIX system as many times simultaneously as you wish. (If you try that on an IBM's VM/CMS system, for example, you will get an obnoxious "already logged in" message.)

The shell also lets you run more than one command at a time during a single login session. Normally, when you type a command and hit RETURN, the shell will let the command have control of your terminal until it is done; you can't type in further commands until the first one is done. But if you want to run a command that does not require user input and you want to do other things while the command is running, put an ampersand (&) after the command.

This is called running the command in the background, and a command that runs in this way is called a background job; by contrast, a job run the normal way is called a foreground job. When you start a background job, you get your shell prompt back immediately, enabling you to enter other commands.

The most obvious use for background jobs is programs that take a long time to run, such as sort or uncompress on large files. For example, assume you just got an enormous compressed file loaded into your directory from magnetic tape.[14] Let's say the file is gcc.tar.Z, which is a compressed archive file that contains well over 10 MB of source code files.

Type uncompress gcc.tar & (you can omit the .Z), and the system will start a job in the background that uncompresses the data "in place" and ends up with the file gcc.tar. Right after you type the command, you will see a line like this:

[1] 175

followed by your shell prompt, meaning that you can enter other commands. Those numbers give you ways of referring to your background job; Chapter 8 explains them in detail.

You can check on background jobs with the command jobs. For each background job, jobs prints a line similar to the above but with an indication of the job's status:

[1]+ Running uncompress gcc.tar &

When the job finishes, you will see a message like this right before your shell prompt:

[1]+ Done uncompress gcc.tar

The message changes if your background job terminated with an error; again, see Chapter 8 for details.

Background I/O

Jobs you put in the background should not do I/O to your terminal. Just think about it for a moment and you'll understand why.

By definition, a background job doesn't have control over your terminal. Among other things, this means that only the foreground process (or, if none, the shell itself) is "listening" for input from your keyboard. If a background job needs keyboard input, it will often just sit there doing nothing until you do something about it (as described in Chapter 8).

If a background job produces screen output, the output will just appear on your screen. If you are running a job in the foreground that produces output too, then the output from the two jobs will be randomly (and often annoyingly) interspersed.

If you want to run a job in the background that expects standard input or produces standard output, you usually want to redirect the I/O so that it comes from or goes to a file. Programs that produce small, one-line messages (warnings, "done" messages, etc.) are an exception to this general rule; you may not mind if these are interspersed with whatever other output you are seeing at a given time.

For example, the diff utility examines two files, whose names are given as arguments, and prints a summary of their differences on the standard output. If the files are exactly the same, diff is silent. Usually, you invoke diff expecting to see a few lines that are different.

diff, like sort and compress, can take a long time to run if the input files are very large. Suppose that you have two large files that are called warandpeace.txt and warandpeace.txt.old. The command diff warandpeace.txt warandpeace.txt.old [15] reveals that the author decided to change the name "Ivan" to "Aleksandr" throughout the entire file—i.e., hundreds of differences, resulting in very large amounts of output.

If you type diff warandpeace.txt warandpeace.txt.old &, then the system will spew lots and lots of output at you, which will be difficult to stop—even with the techniques explained in Chapter 7. However, if you type:

$ diff warandpeace.txt warandpeace.txt.old > txtdiff &

then the differences will be saved in the file txtdiff for you to examine later.

Background Jobs and Priorities

Background jobs can save you a lot of thumb-twiddling time. Just remember that such jobs eat up lots of system resources like memory and the processor (CPU). Just because you're running several jobs at once doesn't mean that they will run faster than they would if run sequentially—in fact, performance is usually slightly worse.

Every job on the system is assigned a priority, a number that tells the operating system how much priority to give the job when it doles out resources (the higher the number, the lower the priority). Commands that you enter from the shell, whether foreground or background jobs, usually have the same priority. The system administrator is able to run commands at a higher priority than normal users.

Note that if you're on a multiuser system, running lots of background jobs may eat up more than your fair share of resources, and you should consider whether having your job run as fast as possible is really more important than being a good citizen.

Speaking of good citizenship, there is also a UNIX command that lets you lower the priority of any job: the aptly named nice. If you type nice command, where command can be a complex shell command line with pipes, redirectors, etc., then the command will run at a lower priority.[16] You can control just how much lower by giving nice a numerical argument; consult the nice manpage for details.[17]

[14] Compressed files are created by the compress utility, which packs files into smaller amounts of space; they have names of the form filename.Z, where filename is the name of the original uncompressed file.

[15] You could use diff warandpeace* as a shorthand to save typing—as long as there are no other files with names of that form. Remember that diff doesn't see the arguments until after the shell has expanded the wildcards. Many people overlook this use of wildcards.

[16] Complex commands following nice should be quoted.

[17] If you are a system administrator logged in as root, then you can also use nice to raise a job's priority.

Special Characters and Quoting

The characters <, >, |, and & are four examples of special characters that have particular meanings to the shell. The wildcards we saw earlier in this chapter (*, ?, and [...]) are also special characters.

Table 1-6 gives the meanings of all special characters within shell command lines only. Other characters have special meanings in specific situations, such as the regular expressions and string-handling operators that we'll see in Chapter 3 and Chapter 4.

Table 1-6. Special characters

Character

Meaning

See chapter

~

Home directory

Chapter 1

`

Command substitution (archaic)

Chapter 4

#

Comment

Chapter 4

$

Variable expression

Chapter 3

&

Background job

Chapter 1

*

String wildcard

Chapter 1

(

Start subshell

Chapter 8

)

End subshell

Chapter 8

\

Quote next character

Chapter 1

|

Pipe

Chapter 1

[

Start character-set wildcard

Chapter 1

]

End character-set wildcard

Chapter 1

{

Start command block

Chapter 7

}

End command block

Chapter 7

;

Shell command separator

Chapter 3

`

Strong quote

Chapter 1

<">

Weak quote

Chapter 1

<

Input redirect

Chapter 1

>

Output redirect

Chapter 1

/

Pathname directory separator

Chapter 1

?

Single-character wildcard

Chapter 1

!

Pipeline logical NOT

Chapter 5

Quoting

Sometimes you will want to use special characters literally, i.e., without their special meanings. This is called quoting. If you surround a string of characters with single quotation marks (or quotes), you strip all characters within the quotes of any special meaning they might have.

The most obvious situation where you might need to quote a string is with the echo command, which just takes its arguments and prints them to the standard output. What is the point of this? As you will see in later chapters, the shell does quite a bit of processing on command lines—most of which involves some of the special characters listed in Table 1-6. echo is a way of making the result of that processing available on the standard output.

What if we want to print the string 2 * 3 > 5 is a valid inequality? Suppose you type this:

$ echo 2 * 3 > 5 is a valid inequality.

You would get your shell prompt back, as if nothing happened! But then there would be a new file, with the name 5, containing "2", the names of all files in your current directory, and then the string 3 is a valid inequality. Make sure you understand why.[18]

However, if you type:

$ echo '2 * 3 > 5 is a valid inequality.'

the result is the string, taken literally. You needn't quote the entire line, just the portion containing special characters (or characters you think might be special, if you just want to be sure):

$ echo '2 * 3 > 5' is a valid inequality.

This has exactly the same result.

Notice that Table 1-6 lists double quotes (") as weak quotes. A string in double quotes is subjected to some of the steps the shell takes to process command lines, but not all. (In other words, it treats only some special characters as special.) You'll see in later chapters why double quotes are sometimes preferable; Chapter 7 contains the most comprehensive explanation of the shell's rules for quoting and other aspects of command-line processing. For now, though, you should stick to single quotes.

Backslash-Escaping

Another way to change the meaning of a character is to precede it with a backslash (\). This is called backslash-escaping the character. In most cases, when you backslash-escape a character, you quote it. For example:

$ echo 2 \* 3 \> 5 is a valid inequality.

will produce the same results as if you surrounded the string with single quotes. To use a literal backslash, just surround it with quotes ('\') or, even better, backslash-escape it (\\).

Here is a more practical example of quoting special characters. A few UNIX commands take arguments that often include wildcard characters, which need to be escaped so the shell doesn't process them first. The most common such command is find, which searches for files throughout entire directory trees.

To use find, you supply the root of the tree you want to search and arguments that describe the characteristics of the file(s) you want to find. For example, the command find . -name string searches the directory tree whose root is your current directory for files whose names match the string. (Other arguments allow you to search by the file's size, owner, permissions, date of last access, etc.)

You can use wildcards in the string, but you must quote them, so that the find command itself can match them against names of files in each directory it searches. The command find . -name `*.c' will match all files whose names end in .c anywhere in your current directory, subdirectories, sub-subdirectories, etc.

Quoting Quotation Marks

You can also use a backslash to include double quotes within a quoted string. For example:

$ echo \"2 \* 3 \> 5\" is a valid inequality.

produces the following output:

"2 * 3 > 5" is a valid inequality.

However, this won't work with single quotes inside quoted expressions. For example, echo `Hatter\'s tea party' will not give you Hatter's tea party. You can get around this limitation in various ways. First, try eliminating the quotes:

$ echo Hatter\'s tea party

If no other characters are special (as is the case here), this works. Otherwise, you can use the following command:

$ echo 'Hatter'\''s tea party'

That is, `\'' (i.e., single quote, backslash, single quote, single quote) acts like a single quote within a quoted string. Why? The first ' in `\'' ends the quoted string we started with (`Hatter), the \' inserts a literal single quote, and the next ' starts another quoted string that ends with the word "party". If you understand this, then you will have no trouble resolving the other bewildering issues that arise from the shell's often cryptic syntax.

Continuing Lines

A related issue is how to continue the text of a command beyond a single line on your terminal or workstation window. The answer is conceptually simple: just quote the RETURN key. After all, RETURN is really just another character.

You can do this in two ways: by ending a line with a backslash, or by not closing a quote mark (i.e., by including RETURN in a quoted string). If you use the backslash, there must be nothing between it and the end of the line—not even spaces or TABs.

Whether you use a backslash or a single quote, you are telling the shell to ignore the special meaning of the RETURN character. After you press RETURN, the shell understands that you haven't finished your command line (i.e., since you haven't typed a "real" RETURN), so it responds with a secondary prompt, which is > by default, and waits for you to finish the line. You can continue a line as many times as you wish.

For example, if you want the shell to print the first sentence of of Lewis Carroll's Alice's Adventures in Wonderland, you can type this:

$ echo The Caterpillar and Alice looked at each other for some \
> time in silence: at last Caterpillar took the hookah out of its \
> mouth, and addressed her in a languid, sleepy voice.

Or you can do it this way:

$ echo 'The Caterpillar and Alice looked at each other for some
> time in silence: at last Caterpillar took the hookah out of its
> mouth, and addressed her in a languid, sleepy voice.'

Control Keys

Control keys—those that you type by holding down the CONTROL (or CTRL) key and hitting another key—are another type of special character. These normally don't print anything on your screen, but the operating system interprets a few of them as special commands. You already know one of them: RETURN is actually the same as CTRL-M (try it and see). You have probably also used the BACKSPACE or DEL key to erase typos on your command line.

Actually, many control keys have functions that don't really concern you—yet you should know about them for future reference and in case you type them by accident.

Perhaps the most difficult thing about control keys is that they can differ from system to system. The usual arrangement is shown in Table 1-7, which lists the control keys that all major modern versions of UNIX support. Note that DEL and CTRL-? are the same character.

You can use the stty command to find out what your settings are and change them if you wish; see Chapter 8 for details. If the version of UNIX on your system is one of those that derive from BSD (such as SunOS and OS X), type stty all to see your control-key settings; you will see something like this:

erase  kill   werase rprnt  flush  lnext  susp   intr   quit   stop   eof
^?     ^U     ^W     ^R     ^O     ^V     ^Z/^Y  ^C     ^\     ^S/^Q  ^D

Table 1-7. Control keys

Control key

stty name

Function description

CTRL-C

intr

Stop current command

CTRL-D

eof

End of input

CTRL-\

quit

Stop current command if CTRL-C doesn't work

CTRL-S

stop

Halt output to screen

CTRL-Q

Restart output to screen

DEL or CTRL-?

erase

Erase last character

CTRL-U

kill

Erase entire command line

CTRL-Z

susp

Suspend current command (see Chapter 8)

The ^X notation stands for CTRL-X. If your UNIX version derives from System III or System V (this includes AIX, HP/UX, SCO, Linux, and Xenix), type stty -a.

The resulting output will include this information:

intr = ^c; quit = ^|; erase = DEL; kill = ^u; eof = ^d; eol = ^`;
swtch = ^`; susp = ^z; dsusp <undef>;

The control key you will probably use most often is CTRL-C, sometimes called the interrupt key. This stops—or tries to stop—the command that is currently running. You will want to use this when you enter a command and find that it's taking too long, you gave it the wrong arguments, you change your mind about wanting to run it, or whatever.

Sometimes CTRL-C doesn't work; in that case, if you really want to stop a job, try CTRL-\. But don't just type CTRL-\; always try CTRL-C first! Chapter 8 explains why in detail. For now, suffice it to say that CTRL-C gives the running job more of a chance to clean up before exiting, so that files and other resources are not left in funny states.

We've already seen an example of CTRL-D. When you are running a command that accepts standard input from your keyboard, CTRL-D tells the process that your input is finished—as if the process were reading a file and it reached the end of the file. mail is a utility in which this happens often. When you are typing in a message, you end by typing CTRL-D. This tells mail that your message is complete and ready to be sent. Most utilities that accept standard input understand CTRL-D as the end-of-input character, though many such programs accept commands like q, quit, exit, etc.

CTRL-S and CTRL-Q are called flow-control characters. They represent an antiquated way of stopping and restarting the flow of output from one device to another (e.g., from the computer to your terminal) that was useful when the speed of such output was low. They are rather obsolete in these days of high-speed networks. In fact, under the latter conditions, CTRL-S and CTRL-Q are basically a nuisance. The only thing you really need to know about them is that if your screen output becomes "stuck," then you may have hit CTRL-S by accident. Type CTRL-Q to restart the output; any keys you may have hit in between will then take effect.

The final group of control characters gives you rudimentary ways to edit your command line. DEL acts as a backspace key (in fact, some systems use the actual BACKSPACE or CTRL-H key as "erase" instead of DEL); CTRL-U erases the entire line and lets you start over. Again, these have been superseded.[19] The next chapter will look at bash's editing modes, which are among its most useful features and far more powerful than the limited editing capabilities described here.

[18] This should also teach you something about the flexibility of placing I/O redirectors anywhere on the command line—even in places where they don't seem to make sense.

[19] Why are so many outmoded control keys still in use? They have nothing to do with the shell per se; instead, they are recognized by the tty driver, an old and hoary part of the operating system's lower depths that controls input and output to/from your terminal.

Help

A feature in bash that no other shell has is an online help system. The help command gives information on commands in bash. If you type help by itself, you'll get a list of the built-in shell commands along with their options.

If you provide help with a shell command name it will give you a detailed description of the command:

$ help cd
cd: cd [-L | -P] [dir]
 Change the current directory to DIR. The variable $HOME is the
 default DIR. The variable $CDPATH defines the search path for
 the directory containing DIR. Alternative directory names in
 CDPATH are separated by a colon (:). A null directory name is
 the same as the current directory, i.e. `.'. If DIR begins with
 a slash (/), then $CDPATH is not used. If the directory is not
 found, and the shell option `cdable_vars' is set, then try the
 word as a variable name. If that variable has a value, then cd
 to the value of that variable. The -P option says to use the
 physical directory structure instead of following symbolic links;
 the -L option forces symbolic links to be followed.

You can also provide help with a partial name, in which case it will return details on all commands matching the partial name. For example, help re will provide details on read, readonly, and return. The partial name can also include wildcards. You'll need to quote the name to ensure that the wildcard is not expanded to a filename. So the last example is equivalent to help `re*', and help `re??' will only return details on read.

Sometimes help will show more than a screenful of information and it will scroll the screen. You can use the more command to show one screenful at a time by typing help command | more.

Chapter 2. Command-Line Editing

It's always possible to make mistakes when you type at a computer keyboard, but perhaps even more so when you are using a UNIX shell. UNIX shell syntax is powerful, yet terse, full of odd characters, and not particularly mnemonic, making it possible to construct command lines that are as cryptic as they are complex. The Bourne and C shells exacerbate this situation by giving you extremely limited ways of editing your command lines.

In particular, there is no way to recall a previous command line so that you can fix a mistake. If you are an experienced Bourne shell user, undoubtedly you know the frustration of having to retype long command lines. You can use the BACKSPACE key to edit, but once you hit RETURN, it's gone forever!

The C shell provided a small improvement via its history mechanism, which provides a few very awkward ways of editing previous commands. But there are more than a few people who have wondered, "Why can't I edit my UNIX command lines in the same way I can edit text with an editor?"

This is exactly what bash allows you to do. It has editing modes that allow you to edit command lines with editing commands similar to those of the two most popular UNIX editors, vi and emacs. It also provides a much-extended analog to the C shell history mechanism called fc (for fix command) that, among other things, allows you to use your favorite editor directly for editing your command lines. To round things out, bash also provides the original C shell history mechanism.

In this chapter, we will discuss the features that are common to all of bash's command-history facilities; after that, we will deal with each facility in detail. If you use either vi or emacs, you may wish to read the section on the emulation mode for only the one you use.[1] If you use neither vi nor emacs, but are interested in learning one of the editing modes anyway, we suggest emacs-mode, because it is more of a natural extension of the minimal editing capability you get with the bare shell.

We should mention up front that both emacs- and vi-modes introduce the potential for clashes with control keys set up by the UNIX terminal interface. Recall the control keys shown in Chapter 1 in Table 1-7, and the sample stty command output. The control keys shown there override their functions in the editing modes.

During the rest of this chapter, we'll warn you when an editing command clashes with the default setting of a terminal-interface control key.

Enabling Command-Line Editing

bash initially starts interactively with emacs-mode as the default (unless you have started bash with the -noediting option;[2] see Chapter 10). There are two ways to enter either editing mode while in the shell. First, you can use the set command:

$ set -o emacs

or:

$ set -o vi

The second way of selecting the editing mode is to set a readline variable in the file .inputrc. We will look at this method later in this chapter.

You will find that the vi- and emacs-editing modes are good at emulating the basic commands of these editors, but not their advanced features; their main purpose is to let you transfer "keyboard habits" from your favorite editor to the shell. fc is quite a powerful facility; it is mainly meant to supplant C shell history and as an "escape hatch" for users of editors other than vi or emacs. Therefore the section on fc is mainly recommended to C shell users and those who don't use either standard editor.

[1] You will get the most out of these sections if you are already familiar with the editor(s) in question. Good sources for more complete information on the editors are the O'Reilly books Learning the vi Editor, by Linda Lamb and Arnold Robbins, and Learning GNU Emacs, by Debra Cameron, James Elliott, and Marc Loy.

[2] -nolineediting in versions of bash prior to 2.0.

The History List

All of bash's command history facilities depend on a list that records commands as you type them into the shell. Whenever you log in or start another interactive shell, bash reads an initial history list from the file .bash_history in your home directory. From that point on, every bash interactive session maintains its own list of commands. When you exit from a shell, it saves the list in .bash_history. You can call this file whatever you like by setting the environment variable HISTFILE. We'll look more closely at HISTFILE and some other related command history variables in the next chapter.

emacs Editing Mode

If you are an emacs user, you will find it most useful to think of emacs editing mode as a simplified emacs with a single, one-line window. All of the basic commands are available for cursor motion, cut-and-paste, and search.

Basic Commands

emacs-mode uses control keys for the most basic editing functions. If you aren't familiar with emacs, you can think of these as extensions of the rudimentary "erase" character (usually BACKSPACE or DEL) that UNIX provides through its interface to users' terminals. For the sake of consistency, we'll assume your erase character is DEL from now on; if it is CTRL-H or something else, you will need to make a mental substitution. The most basic control-key commands are shown in Table 2-1. (Important: remember that typing CTRL-D when your command line is empty may log you off!) The basic keyboard habits of emacs-mode are easy to learn, but they do require that you assimilate a couple of concepts that are peculiar to the emacs editor.

Table 2-1. Basic emacs-mode commands

Command

Description

CTRL-B

Move backward one character (without deleting)

CTRL-F

Move forward one character

DEL

Delete one character backward

CTRL-D

Delete one character forward

The first of these is the use of CTRL-B and CTRL-F for backward and forward cursor motion. These keys have the advantage of being obvious mnemonics. You can also use the left and right cursor motion keys ("arrow" keys), but for the rest of this discussion we will use the control keys, as they work on all keyboards. In emacs-mode, the point (sometimes also called dot) is an imaginary place just to the left of the character the cursor is on. In the command descriptions in Table 2-1, some say "forward" while others say "backward." Think of forward as "to the right of point" and backward as "to the left of point."

For example, let's say you type in a line and, instead of typing RETURN, you type CTRL-B and hold it down so that it repeats. The cursor will move to the left until it is over the first character on the line, like this:

$ [f]grep -l Duchess < ~cam/book/alice_in_wonderland

Now the cursor is on the f, and point is at the beginning of the line, just before the f. If you type DEL, nothing will happen because there are no characters to the left of point. However, if you press CTRL-D (the "delete character forward" command) you will delete the first letter:

$ [g]rep -l Duchess < ~cam/book/alice_in_wonderland

Point is still at the beginning of the line. If this were the desired command, you could hit RETURN now and run it; you don't need to move the cursor back to the end of the line. However, you could type CTRL-F repeatedly to get there:

$ grep -l Duchess < ~cam/book/alice_in_wonderland[]

At this point, typing CTRL-D wouldn't do anything, but hitting DEL would erase the final d.

Word Commands

The basic commands are really all you need to get around a command line, but a set of more advanced commands lets you do it with fewer keystrokes. These commands operate on words rather than single characters; emacs-mode defines a word as a sequence of one or more alphanumeric characters.

The word commands are shown in Table 2-2. The basic commands are all single characters, whereas these consist of two keystrokes, ESC followed by a letter. You will notice that the command ESC X, where X is any letter, often does for a word what CTRL-X does for a single character. "Kill" is another word for "delete"; it is the standard term used in the readline library documentation for an "undoable" deletion.

Table 2-2. emacs-mode word commands

Command

Description

ESC-B

Move one word backward

ESC-F

Move one word forward

ESC-DEL

Kill one word backward

ESC-CTRL-H

Kill one word backward

ESC-D

Kill one word forward

CTRL-Y

Retrieve ("yank") last item killed

To return to our example: if we type ESC-B, point will move back a word. Since the underscore (_) is not an alphanumeric character, emacs-mode will stop there:

$ grep -l Duchess < ~cam/book/alice_in_[w]onderland

The cursor is on the w in wonderland, and point is between the _ and the w. Now let's say we want to change the -l option of this command from Duchess to Cheshire. We need to move back on the command line, so we type ESC-B four more times. This gets us here:

$ grep -l Duchess < ~[c]am/book/alice_in_wonderland

If we type ESC-B again, we end up at the beginning of Duchess:

$ grep -l [D]uchess < ~cam/book/alice_in_wonderland

Why? Remember that a word is defined as a sequence of alphanumeric characters only. Therefore < is not a word; the next word in the backward direction is Duchess. We are now in position to delete Duchess, so we type ESC-D and get:

$ grep -l []< ~cam/book/alice_in_wonderland

Now we can type in the desired argument:

$ grep -l Cheshire[]< ~cam/book/alice_in_wonderland

If you want Duchess back again you can use the CTRL-Y command. The CTRL-Y "yank" command will undelete a word if the word was the last thing deleted. In this case, CTRL-Y would insert Duchess at the point.

Line Commands

There are still more efficient ways of moving around a command line in emacs-mode. A few commands deal with the entire line; they are shown in Table 2-3.

Table 2-3. emacs-mode line commands

Command

Description

CTRL-A

Move to beginning of line

CTRL-E

Move to end of line

CTRL-K

Kill forward to end of line

Using CTRL-A, CTRL-E, and CTRL-K should be straightforward. Remember that CTRL-Y will always undelete the last thing deleted; if you use CTRL-K, that could be quite a few characters.

Moving Around in the History List

Now we know how to get around the command line efficiently and make changes. But that doesn't address the original issue of recalling previous commands by accessing the history list. emacs-mode has several commands for doing this, summarized in Table 2-4.

Table 2-4. emacs-mode commands for moving through the history list

Command

Description

CTRL-P

Move to previous line

CTRL-N

Move to next line

CTRL-R

Search backward

ESC-<

Move to first line of history list

ESC->

Move to last line of history list

CTRL-P and CTRL-N move you through the command history. If you have cursor motion keys (arrow keys) you can use them instead. The up-arrow is the same as CTRL-P and the down-arrow is the same as CTRL-N. For the rest of this discussion, we'll stick to using the control keys because they can be used on all keyboards.

CTRL-P is by far the one you will use most often—it's the "I made a mistake, let me go back and fix it" key. You can use it as many times as you wish to scroll back through the history list. If you want to get back to the last command you entered, you can hold down CTRL-N until bash beeps at you, or just type ESC->. As an example, you hit RETURN to run the command above, but you get an error message telling you that your option letter was incorrect. You want to change it without retyping the whole thing.

First, you would type CTRL-P to recall the bad command. You get it back with point at the end:

$ grep -l Duchess < ~cam/book/alice_in_wonderland[]

After CTRL-A, ESC-F, two CTRL-Fs, and CTRL-D, you have:

$ grep -[]Duchess < ~cam/book/alice_in_wonderland

You decide to try -s instead of -l, so you type s and hit RETURN. You get the same error message, so you give up and look it up in the manual. You find out that the command you want is fgrep—not grep—after all.

You sigh heavily and go back and find the fgrep command you typed in an hour ago. To do this, you type CTRL-R; whatever was on the line will disappear and be replaced by (reverse-i-search)`':. Then type fgrep, and you will see this:

$ (reverse-i-search)`fgrep': fgrep -l Duchess <~cam/book/ \
   alice_in_wonderland[]

The shell dynamically searches back through the command history each time you type a letter, looking for the current substring in the previous commands. In this example, when you typed f the shell would have printed the most recent command in the history with that letter in it. As you typed more letters, the shell narrowed the search until you ended up with the line displayed above. Of course, this may not have been the particular line you wanted. Typing CTRL-R again makes the shell search further back in the history list for a line with "fgrep" in it. If the shell doesn't find the substring again, it will beep.

If you try the fgrep command by hitting RETURN, two things will happen. First, of course, the command will run. Second, this line will be entered into the history list at the end, and your "current line" will be at the end as well. You will no longer be somewhere else in the command history.

Another handy trick to save typing if you have already done a search is to type CTRL-R twice in a row. This recalls the previous search string you typed in.[3]

CTRL-P, CTRL-N, and CTRL-R are clearly the most important emacs-mode commands that deal with the command history. The others are less useful but are included for compatibility with the full emacs editor.

Textual Completion

One of the most powerful (and typically underused) features of emacs-mode is its textual completion facility, inspired by similar features in the full emacs editor, the C shell, and (originally) the old DEC TOPS-20 operating system.

The premise behind textual completion is simple: you should have to type only as much of a filename, user name, function, etc., to identify it unambiguously. This is an excellent feature; there is an analogous one in vi-mode. We recommend that you take the time to learn it, since it will save you quite a bit of typing.

There are three commands in emacs-mode that relate to textual completion. The most important is TAB.[4] When you type in a word of text followed by TAB, bash will attempt to complete the name. Then one of four things can happen:

If there is nothing whose name begins with the word, the shell will beep and nothing further will happen.

If there is a command name in the search path, a function name, or a filename that the string uniquely matches, the shell will type the rest of it, followed by a space in case you want to type in more command arguments. Command name completion is only attempted when the word is in a command position (e.g., at the start of a line).

If there is a directory that the string uniquely matches, the shell will complete the filename, followed by a slash.

If there is more than one way to complete the name, the shell will complete out to the longest common prefix among the available choices. Commands in the search path and functions take precedence over filenames.

For example, assume you have a directory with the files tweedledee.c and tweedledum.c. You want to compile the first of these by typing cc tweedledee.c. You type cc twee followed by TAB. This is not an unambiguous prefix, since the prefix "twee" is common to both filenames, so the shell only completes out to cc tweedled. You need to type more letters to distinguish between them, so you type e and hit TAB again. Then the shell completes out to "cc tweedledee.c", leaving the extra space for you to type in other filenames or options.

If you didn't know what options were available after trying to complete cc twee, you could press TAB again. bash prints out the possible completions for you and presents your input line again:

$ cc tweedled
tweedledee.c  tweedledum.c
$ cc tweedled

A related command is ESC-?, which expands the prefix to all possible choices, listing them to standard output. Be aware that the completion mechanism doesn't necessarily expand to a filename. If there are functions and commands that satisfy the string you provide, the shell expands those first and ignores any files in the current directory. As we'll see, you can force completion to a particular type.

It is also possible to complete other environment entities. If the text being completed is preceded by a dollar sign ($), the shell attempts to expand the name to that of a shell variable (see Chapter 3, for a discussion of shell variables). If the text is preceded by a tilde (~), completion to a username is attempted; if preceded by an at sign (@), a hostname is attempted.

For example, suppose there was a username cameron on the system. If you wanted to change to this user's home directory, you could just use tilde notation and type the first few letters of the name, followed by a TAB:

$ cd ~ca

which would expand to:

$ cd ~cameron/

You can force the shell to complete to specific things. Table 2-5 lists the standard keys for these.

Table 2-5. Completion command

Command

Description

TAB

Attempt to perform general completion of the text

ESC-?

List the possible completions

ESC-/

Attempt filename completion

CTRL-X /

List the possible filename completions

ESC-~

Attempt username completion

CTRL-X ~

List the possible username completions

ESC-$

Attempt variable completion

CTRL-X $

List the possible variable completions

ESC-@

Attempt hostname completion

CTRL-X @

List the possible hostname completions

ESC-!

Attempt command completion

CTRL-X !

List the possible command completions

ESC-TAB

Attempt completion from previous commands in the history list

If you find that you are interested only in completing long filenames, you are probably better off using ESC-/ rather than TAB. This ensures that the result will be a filename and not a function or command name.

Miscellaneous Commands

Several miscellaneous commands complete emacs editing mode; they are shown in Table 2-6.

Table 2-6. emacs-mode miscellaneous commands

Command

Description

CTRL-J

Same as RETURN

CTRL-L

Clears the screen, placing the current line at the top of the screen

CTRL-M

Same as RETURN

CTRL-O

Same as RETURN, then display next line in command history

CTRL-T

Transpose two characters on either side of point and move point forward by one

CTRL-U

Kills the line from the beginning to point

CTRL-V

Quoted insert

CTRL-[

Same as ESC (most keyboards)

ESC-C

Capitalize word after point

ESC-U

Change word after point to all capital letters

ESC-L

Change word after point to all lowercase letters

ESC-.

Insert last word in previous command line after point

ESC-_

Same as ESC-.

BSD-derived systems use CTRL-V and CTRL-W as default settings for the "quote next character" and "word erase" terminal interface functions, respectively.

A few of these miscellaneous commands are worth discussing, even though they may not be among the most useful emacs-mode commands.

CTRL-O is useful for repeating a sequence of commands you have already entered. Just go back to the first command in the sequence and press CTRL-O instead of RETURN. This will execute the command and bring up the next command in the history list. Press CTRL-O again to enter this command and bring up the next one. Repeat this until you see the last command in the sequence; then just hit RETURN.

Of the case-changing commands, ESC-L is useful when you hit the CAPS LOCK key by accident and don't notice it immediately. Since all-caps words aren't used too often in the UNIX world, you probably won't use ESC-U very often.

CTRL-V will cause the next character you type to appear in the command line as is; i.e., if it is an editing command (or an otherwise special character like CTRL-D), it will be stripped of its special meaning.

If it seems like there are too many synonyms for RETURN, bear in mind that CTRL-M is actually the same (ASCII) character as RETURN, and that CTRL-J is actually the same as LINEFEED, which UNIX usually accepts in lieu of RETURN anyway.

ESC-. and ESC-_ are useful if you want to run several commands on a given file. The usual UNIX convention is that a filename is the last argument to a command. Therefore you can save typing by just entering each command followed by SPACE and then typing ESC-. or ESC-_. For example, say you want to examine a file using more, so you type:

$ more myfilewithaverylongname

Then you decide you want to print it, so you type the print command lp. You can avoid typing the very long name by typing lp followed by a space and then ESC-. or ESC-_; bash will insert myfilewithaverylongname for you.

[3] Not available in versions of bash prior to 2.05a.

[4] emacs users will recognize this as minibuffer completion.

vi Editing Mode

Like emacs-mode, vi-mode essentially creates a one-line editing window into the history list. vi-mode is popular because vi is the most standard UNIX editor. But the function for which vi was designed, writing C programs, has different editing requirements from those of command interpreters. As a result, although it is possible to do complex things in vi with relatively few keystrokes, the relatively simple things you need to do in bash sometimes take too many keystrokes.

Like vi, vi-mode has two modes of its own: input and control mode. The former is for typing commands (as in normal bash use); the latter is for moving around the command line and the history list. When you are in input mode, you can type commands in and hit RETURN to run them. In addition, you have minimal editing capabilities via control characters, which are summarized in Table 2-7

Table 2-7. Editing commands in vi input mode

Command

Description

DEL

Delete previous character

CTRL-W

Erase previous word (i.e., erase until a blank)

CTRL-V

Quote the next character

ESC

Enter control mode (see below)

Note that at least some of these—depending on which version of UNIX you have—are the same as the editing commands provided by UNIX through its terminal interface.[5] vi-mode will use your "erase" character as the "delete previous character" key; usually it is set to DEL or CTRL-H (BACKSPACE). CTRL-V works the same way as in emacs-mode; it causes the next character to appear in the command line as is and lose its special meaning.

Under normal circumstances, you just stay in input mode. But if you want to go back and make changes to your command line, or if you want to recall previous commands, you need to go into control mode. To do this, hit ESC.

Simple Control Mode Commands

A full range of vi editing commands are available to you in control mode. The simplest of these move you around the command line and are summarized in Table 2-8. vi-mode contains two "word" concepts. The simplest is any sequence of non-blank characters; we'll call this a non-blank word. The other is any sequence of only alphanumeric characters (letters and digits) plus the underscore (_), or any sequence of only non-alphanumeric characters; we'll just call this a word.[6]

Table 2-8. Basic vi control mode commands

Command

Description

h

Move left one character

l

Move right one character

w

Move right one word

b

Move left one word

W

Move to beginning of next non-blank word

B

Move to beginning of preceding non-blank word

e

Move to end of current word

E

Move to end of current non-blank word

0

Move to beginning of line

^

Move to first non-blank character in line

$

Move to end of line

All of these commands except the last three can be preceded by a number that acts as a repeat count. Whenever you type a number for the repeat count, the number replaces the command prompt for the duration of the repeat command. If your keyboard has cursor motion keys ("arrow" keys), you can use the left and right arrows to move between characters instead of the h and l keys. Repeat counts will work with the cursor keys as well.

The last two will be familiar to users of UNIX utilities (such as grep) that use regular expressions, as well as to vi users.

Time for a few examples. Let's say you type in this line and, before you hit RETURN, decide you want to change it:

$ fgrep -l Duchess < ~cam/book/alice_in_wonderland[]

As shown, your cursor is beyond the last character of the line. First, type ESC to enter control mode; your cursor will move back one space so that it is on the d. Then if you type h, your cursor will move back to the n. If you type 3h from the n, you will end up at the r.

Now we will see the difference between the two "word" concepts. Go back to the end of the line by typing $. If you type b, the word in question is alice_in_wonderland, and the cursor will end up on the a:

$ fgrep -l Duchess < ~cam/book/[a]lice_in_wonderland

If you type b again, the next word is the slash (it's a "sequence" of non-alphanumeric characters), so the cursor ends up over it:

$ fgrep -l Duchess < ~cam/book[/]alice_in_wonderland

However, if you typed B instead of b, the non-blank word would be the entire pathname, and the cursor would end up at the beginning of it—over the tilde:

$ fgrep -l Duchess < [~]cam/book/alice_in_wonderland

You would have had to type b four times—or just 4b—to get the same effect, since there are four "words" in the part of the pathname to the left of /alice_in_wonderland: book, slash, cam, and the leading tilde.

At this point, w and W do the opposite: typing w gets you over the c, since the tilde is a "word," while typing W brings you to the end of the line. But whereas w and W take you to the beginning of the next word, e and E take you to the end of the current word. Thus, if you type w with the cursor on the tilde, you get to:

$ fgrep -l Duchess < ~[c]am/book/alice_in_wonderland

Then typing e gets you to:

$ fgrep -l Duchess < ~ca[m]/book/alice_in_wonderland

And typing an additional w gets you to:

$ fgrep -l Duchess < ~cam[/]book/alice_in_wonderland

On the other hand, E gets you to the end of the current non-blank word—in this case, the end of the line. (If you find these commands non-mnemonic, you're right. The only way to assimilate them is through lots of practice.)

Entering and Changing Text

Now that you know how to enter control mode and move around on the command line, you need to know how to get back into input mode so you can make changes and type in additional commands. A number of commands take you from control mode into input mode; they are listed in Table 2-9. All of them enter input mode a bit differently.

Table 2-9. Commands for entering vi input mode

Command

Description

i

Text inserted before current character (insert)

a

Text inserted after current character (append)

I

Text inserted at beginning of line

A

Text inserted at end of line

R

Text overwrites existing text

Most likely, you will use either i or a consistently, and you may use R occasionally. I and A are abbreviations for 0i and $a respectively. To illustrate the difference between i, a, and R, say we start out with our example line:

$ fgrep -l Duchess < ~cam/book[/]alice_in_wonderland

If you type i followed by end, you will get:

$ fgrep -l Duchess < ~cam/bookend[/]alice_in_wonderland

That is, the cursor will always appear to be under the / before alice_in_wonderland. But if you type a instead of i, you will notice the cursor move one space to the right. Then if you type miss_, you will get:

$ fgrep -l Duchess < ~cam/book/miss_[a]lice_in_wonderland

That is, the cursor will always be just after the last character you typed, until you type ESC to end your input. Finally, if you go back to the first a in alice_in_wonderland, type R instead, and then type through_the_looking_glass, you will see:

$ fgrep -l Duchess < ~cam/book/through_the_looking_glas[s]

In other words, you will be replacing (hence R) instead of inserting text.

Why capital R instead of lowercase r? The latter is a slightly different command, which replaces only one character and does not enter input mode. With r, the next single character overwrites the character under the cursor. So if we start with the original command line and type r followed by a semicolon, we get:

$ fgrep -l Duchess < ~cam/book[;]alice_in_wonderland

If you precede r with a number N, it will allow you to replace the next N existing characters on the line—but still not enter input mode. Lowercase r is effective for fixing erroneous option letters, I/O redirection characters, punctuation, and so on.

Deletion Commands

Now that you know how to enter commands and move around the line, you need to know how to delete. The basic deletion command in vi-mode is d followed by one other letter. This letter determines what the unit and direction of deletion is, and it corresponds to a motion command, as listed previously in Table 2-8.

Table 2-10 shows some commonly used examples.

Table 2-10. Some vi-mode deletion commands

Command

Description

dh

Delete one character backwards

dl

Delete one character forwards

db

Delete one word backwards

dw

Delete one word forwards

dB

Delete one non-blank word backwards

dW

Delete one non-blank word forwards

d$

Delete to end of line

d0

Delete to beginning of line

These commands have a few variations and abbreviations. If you use a c instead of d, you will enter input mode after it does the deletion. You can supply a numeric repeat count either before or after the d (or c). Table 2-11 lists the available abbreviations.

Table 2-11. Abbreviations for vi-mode delete commands

Command

Description

D

Equivalent to d$ (delete to end of line)

dd

Equivalent to 0d$ (delete entire line)

C

Equivalent to c$ (delete to end of line, enter input mode)

cc

Equivalent to 0c$ (delete entire line, enter input mode)

X

Equivalent to dl (delete character backwards)

x

Equivalent to dh (delete character forwards)

Most people tend to use D to delete to end of line, dd to delete an entire line, and x (as "backspace") to delete single characters. If you aren't a hardcore vi user, you may find it difficult to make sure the more esoteric deletion commands are at your fingertips.

Every good editor provides "un-delete" commands as well as delete commands, and vi-mode is no exception. vi-mode maintains a delete buffer that stores all of the modifications to text on the current line only (note that this is different from the full vi editor). The command u undoes previous text modifications. If you type u, it will undo the last change. Typing it again will undo the change before that. When there are no more undo's, bash will beep. A related command is . (dot), which repeats the last text modification command.

There is also a way to save text in the delete buffer without having to delete it in the first place: just type in a delete command but use y ("yank") instead of d. This does not modify anything, but it allows you to retrieve the yanked text as many times as you like later on. The commands to retrieve yanked text are p, which inserts the text on the current line to the right of the cursor, and P, which inserts it to the left of the cursor. The y, p, and P commands are powerful but far better suited to "real vi" tasks like making global changes to documents or programs than to shell commands, so we doubt you'll use them very often.

Moving Around in the History List

The next group of vi control mode commands we cover allows you to move around in and search your command history. This is the all-important functionality that lets you go back and fix an erroneous command without retyping the entire line. These commands are summarized in Table 2-12.

Table 2-12. vi control mode commands for searching the command history

Command

Description

k or -

Move backward one line

j or +

Move forward one line

G

Move to line given by repeat count

/string

Search backward for string

?string

Search forward for string

n

Repeat search in same direction as previous

N

Repeat search in opposite direction of previous

The first two can also be accomplished with the up and down cursor movement keys if your keyboard has them. The first three can be preceded by repeat counts (e.g., 3k or 3- moves back three lines in the command history).

If you aren't familiar with vi and its cultural history, you may be wondering at the wisdom of choosing such seemingly poor mnemonics as h, j, k, and l for backward character, forward line, backward line, and forward character, respectively. Well, there actually is a rationale for the choices—other than that they are all together on the standard keyboard. Bill Joy originally developed vi to run on Lear-Siegler ADM-3a terminals, which were the first popular models with addressable cursors (meaning that a program could send an ADM-3a command to move the cursor to a specified location on the screen). The ADM-3a's h, j, k, and l keys had little arrows on them, so Joy decided to use those keys for appropriate commands in vi. Another (partial) rationale for the command choices is that CTRL-H is the traditional backspace key, and CTRL-J denotes linefeed.

Perhaps + and - are better mnemonics than j and k, but the latter have the advantage of being more easily accessible to touch typists. In either case, these are the most basic commands for moving around the history list. To see how they work, let's use the same examples from the emacs-mode section earlier.

You enter the example command (RETURN works in both input and control modes, as does LINEFEED or CTRL-J):

$ fgrep -l Duchess < ~cam/book/alice_in_wonderland

but you get an error message saying that your option letter was wrong. You want to change it to -s without having to retype the entire command. Assuming you are in control mode (you may have to type ESC to put yourself in control mode), you type k or - to get the command back. Your cursor will be at the beginning of the line:

$ [f]grep -l Duchess < ~cam/book/alice_in_wonderland

Type w to get to the -, then l to get to the l. Now you can replace it by typing rs; press RETURN to run the command.

Now let's say you get another error message, and you finally decide to look at the manual page for the fgrep command. You remember having done this a while ago today, so rather than typing in the entire man command, you search for the last one you used. To do this, type ESC to enter control mode (if you are already in control mode, this will have no effect), then type / followed by man or ma. To be on the safe side, you can also type ^ma; the ^ means match only lines that begin with ma.[7]

But typing /^ma doesn't give you what you want: instead, the shell gives you:

$ make myprogram

To search for "man" again, you can type n, which does another backward search using the last search string. Typing / again without an argument and hitting RETURN will accomplish the same thing.

The G command retrieves the command whose number is the same as the numeric prefix argument you supply. G depends on the command numbering scheme described in Chapter 3 Section 3.4.2.3. Without a prefix argument, it goes to command number 1. This may be useful to former C shell users who still want to use command numbers.

Character-Finding Commands

There are some additional motion commands in vi-mode, although they are less useful than the ones we saw earlier in the chapter. These commands allow you to move to the position of a particular character in the line. They are summarized in Table 2-13, in which x denotes any character.

All of these commands can be preceded by a repeat count.

Table 2-13. vi-mode character-finding commands

Command

Description

fx

Move right to next occurrence of x

Fx

Move left to previous occurrence of x

tx

Move right to next occurrence of x, then back one space

Tx

Move left to previous occurrence of x, then forward one space

;

Redo last character-finding command

,

Redo last character-finding command in opposite direction

Starting with the previous example: let's say you want to change Duchess to Duckess. Make sure that you're at the end of the line (or, in any case, to the left of the h in Duchess); then, if you type Fh, your cursor will move to the h:

$ fgrep -l Duc[h]ess < ~cam/book/alice_in_wonderland

At this point, you could type r to replace the h with k. But let's say you wanted to change Duchess to Dutchess. You would need to move one space to the right of the u. Of course, you could just type l. But, given that you're somewhere to the right of Duchess, the fastest way to move to the c would be to type Tu instead of Fu followed by l.

As an example of how the repeat count can be used with character-finding commands, let's say you want to change the filename from alice_in_wonderland to alice. In this case, assuming your cursor is still on the D, you need to get to one character beyond the second slash. To do this, you can type 2fa. Your cursor will then be on the a in alice_in_wonderland.

The character-finding commands also have associated delete commands. Read the command definitions in the previous table and mentally substitute "delete" for move. You'll get what happens when you precede the given character-finding command with a d. The deletion includes the character given as argument. For example, assume that your cursor is under the a in alice_in_wonderland:

$ fgrep -l Duchess < ~cam/book/[a]lice_in_wonderland

If you want to change alice_in_wonderland to natalie_in_wonderland, one possibility is to type dfc. This means "delete right to next occurrence of c," i.e., delete "alic". Then you can type i (to enter input mode) and then "natali" to complete the change.

One final command rounds out the vi control mode commands for getting around on the current line: you can use the pipe character (|) to move to a specific column, whose number is given by a numeric prefix argument. Column counts start at 1; count only your input, not the space taken up by the prompt string. The default repeat count is 1, of course, which means that typing | by itself is equivalent to 0 (see Table 2-8).

Textual Completion

Although the character-finding commands and | are not particularly useful, vi-mode provides one additional feature that we think you will use quite often: textual completion. This feature is not part of the real vi editor, and it was undoubtedly inspired by similar features in emacs and, originally, in the TOPS-20 operating system for DEC mainframes.

The rationale behind textual completion is simple: you should have to type only as much of a filename, user name, function, etc. as is necessary. Backslash (\) is the command that tells bash to do completion in vi-mode. If you type in a word, hit ESC to enter control mode, and then type \, one of four things will happen; they are the same as for TAB in emacs-mode:

If there is nothing whose name begins with the word, the shell will beep and nothing further will happen.

If there is a command name in the search path, a function name, or a filename that the string uniquely matches, the shell will type the rest of it, followed by a space in case you want to type in more command arguments. Command name completion is only attempted when the word is in a command position (e.g., at the start of a line).

If there is a directory that the string uniquely matches, the shell will complete the filename, followed by a slash.

If there is more than one way to complete the name, the shell will complete out to the longest common prefix among the available choices. Commands in the search path and functions take precedence over filenames.

A related command is *. It behaves similarly to ESC-\, but if there is more than one completion possibility (number four in the previous list), it lists all of them and allows you to type further. Thus, it resembles the * shell wildcard character.

Less useful is the command =, which does the same kind of expansion as *, but in a different way. Instead of expanding the names onto the command line, it prints them, then gives you your shell prompt back and retypes whatever was on your command line before you typed =. For example, if the files in your directory include tweedledee.c and tweedledum.c, and you type tweedl followed by ESC and then =, you will see this:

$ cc tweedl
tweedledee.c tweedledum.c

It is also possible to expand other environment entities, as we saw in emacs-mode. If the text being expanded is preceded by a dollar sign ($), the shell will attempt to expand the name to that of a shell variable. If the text is preceded by a tilde (~), expansion to a username is attempted; if preceded by an at sign (@), a hostname.

Miscellaneous Commands

Several miscellaneous commands round out vi-mode; some of them are quite esoteric. They are listed in Table 2-14.

Table 2-14. Miscellaneous vi-mode commands

Command

Description

~

Invert (twiddle) case of current character(s)

-

Append last word of previous command, enter input mode

CTRL-L

Clear the screen and redraw the current line on it; good for when your screen becomes garbled

#

Prepend # (comment character) to the line and send it to the history list; useful for saving a command to be executed later without having to retype it[8]

[8] The line is also "executed" by the shell. However, # is the shell's comment character, so the shell ignores it.

The first of these can be preceded by a repeat count. A repeat count of n preceding the ~ changes the case of the next n characters. The cursor will advance accordingly.

A repeat count preceding _ causes the nth word in the previous command to be inserted in the current line; without the count, the last word is used. Omitting the repeat count is useful because a filename is usually the last thing on a UNIX command line, and because users often run several commands in a row on the same file. With this feature, you can type all of the commands (except the first) followed by ESC-_, and the shell will insert the filename.

[5] In particular, versions of UNIX derived from 4.x BSD have all of these commands built in.

[6] Neither of these definitions is the same as the definition of a word in emacs-mode.

[7] Fans of vi and search utilities like grep should note that caret (^) for beginning-of-line is the only context operator vi-mode provides for search strings.

The fc Command

fc is a built-in shell command that provides a superset of the C shell history mechanism. You can use it to examine the most recent commands you entered, to edit one or more commands with your favorite "real" editor, and to run old commands with changes without having to type the entire command in again. We'll look at each of these uses in turn.

The -l option to fc lists previous commands. It takes arguments that refer to commands in the history list. Arguments can be numbers or alphanumeric strings; numbers refer to the commands in the history list, while strings refer to the most recent command beginning with the string. fc treats arguments in a rather complex way:

If you give two arguments, they serve as the first and last commands to be shown.

If you specify one number argument, only the command with that number is shown.

With a single string argument, it searches for the most recent command starting with that string and shows you everything from that command to the most recent command.

If you specify no arguments, you will see the last 16 commands you entered. bash also has a built-in command for displaying the history: history.

A few examples should make these options clearer. Let's say you logged in and entered these commands:

            ls -l
            more myfile
            vi myfile
            wc -l myfile
            pr myfile | lp -h

If you type fc -l with no arguments, you will see the above list with command numbers, as in:

1        ls -l
2        more myfile
3        vi myfile
4        wc -l myfile
5        pr myfile | lp -h

Adding another option, -n, suppresses the line numbers. If you want to see only commands 2 through 4, type fc -l 2 4. If you want to see only the vi command, type fc -l 3. To see everything from the vi command up to the present, type fc -l v. Finally, if you want to see commands between more and wc, you can type fc -l m w, fc -l m 4, fc -l 2 4, etc.

The other important option to fc is -e for "edit." This is useful as an "escape hatch" from vi- and emacs-modes if you aren't used to either of those editors. You can specify the pathname of your favorite editor and edit commands from your history list; then when you have made the changes, the shell will actually execute the new lines.

Let's say your favorite editor is a little home-brew gem called zed. You could edit your commands by typing:

$ fc -e /usr/local/bin/zed

This seems like a lot of work just to fix a typo in your previous command; fortunately, there is a better way. You can set the environment variable FCEDIT to the pathname of the editor you want fc to use. If you put a line in your .bash_profile or environment file saying:[9]

FCEDIT=/usr/local/bin/zed

you will get zed when you invoke fc. If FCEDIT isn't set, then bash uses whatever the variable EDITOR is set to. If that's also not set, then bash defaults to vi.

fc is usually used to fix a recent command. When used without options, it handles arguments a bit differently than it does for the fc -l variation discussed earlier:

With no arguments, fc loads the editor with the most recent command.

With a numeric argument, fc loads the editor with the command with that number.

With a string argument, fc loads the most recent command starting with that string.

With two arguments to fc, the arguments specify the beginning and end of a range of commands, as above.

Remember that fc actually runs the command(s) after you edit them. Therefore, the last-named choice can be dangerous. bash will attempt to execute all commands in the range you specify when you exit your editor. If you have typed in any multi-line constructs (like those we will cover in Chapter 5), the results could be even more dangerous. Although these might seem like valid ways of generating "instant shell programs," a far better strategy would be to direct the output of fc -ln with the same arguments to a file; then edit that file and execute the commands when you're satisfied with them:

$ fc -l cp > lastcommands$ vi lastcommands$ source lastcommands

In this case, the shell will not try to execute the file when you leave the editor!

There is one final option with fc. fc -s allows you to rerun a command. With an argument, fc will rerun the last command starting with the given string. Without an argument, it will rerun the previous command. The -s option also allows you to provide a pattern and replacement. For example, if you typed:

$ cs prog.c

You could correct it with fc -s cs=cc. This can be combined with the string search: fc -s cs=cc cs. The last occurrence of cs will be found and replaced with cc.

[9] See Chapter 3 for information on the bash startup file .bash_profile.

History Expansion

If you are a C shell user, you may be familiar with the history expansion mechanism that it provides. bash provides a similar set of features. History expansion is a primitive way to recall and edit commands in the history list. The way to recall commands is by the use of event designators. Table 2-15 gives a complete list.

Table 2-15. Event designators

Command

Description

!

Start a history substitution

!!

Refers to the last command

! n

Refers to command line n

!- n

Refers to the current command line minus n

! string

Refers to the most recent command starting with string

!? string?

Refers to the most recent command containing string; the ending ? is optional

^ string1^string2

Repeat the last command, replacing string1 with string2

By far the most useful command is !!. Typing !! on the command line re-executes the last command. If you know the command number of a specific command, you can use the !n form, where n is the command number. Command numbers can be determined from the history command. Alternatively, you can re-execute the most recent command beginning with the specified string by using ! string.

You might also find the last expansion in the table to be of some use if you've made a typing mistake. For example, you might have typed:

$ cat through_the_loking_glass | grep Tweedledee > dee.list

Instead of moving back to the line and changing loking to looking, you could just type ^lok^look. This will change the string lok to look and then execute the resulting command.

It's also possible to refer to certain words in a previous command by the use of a word designator. Table 2-16 lists available designators. Note that when counting words, bash (like most UNIX programs) starts counting with zero, not with one.

Table 2-16. Word designators

Designator

Description

0

The zeroth (first) word in a line

n

The nth word in a line

^

The first argument (the second word)

$

The last argument in a line

%

The word matched by the most recent ?string search

x-y

A range of words from x to y. -y is synonymous with 0-y

*

All words but the zeroth (first); synonymous with 1-$.; if there is only one word on the line, an empty string is returned

x *

Synonymous with x-$

x-

The words from x to the second to last word

The word designator follows the event designator, separated by a colon. You could, for example, repeat the previous command with different arguments by typing !!:0 followed by the new arguments.

Event designators may also be followed by modifiers. The modifiers follow the word designator, if there is one. Table 2-17 lists the available modifiers.

Table 2-17. Modifiers

Modifier

Description

h

Removes a trailing pathname component, leaving the head

r

Removes a trailing suffix of the form .xxx

e

Removes all but the trailing suffix

t

Removes all leading pathname components, leaving the tail

p

Prints the resulting command but doesn't execute it

q

Quotes the substituted words, escaping further substitutions

x

Quotes the substituted words, breaking them into words at blanks and newlines

s/old/new/

Substitutes new for old

More than one modifier may be used with an event designator; each one is separated by a colon.

History expansion is fine for re-executing a command quickly, but it has been superseded by the command-line editing facilities that we looked at earlier in this chapter. Its inclusion is really only for completeness, and we feel you are better off mastering the techniques offered in the vi or emacs editing modes.

readline

bash's command-line editing interface is readline. It is actually a library of software developed for the GNU project that can be used by applications requiring a text-based interface. It provides editing and text-manipulation features to make it easier for the user to enter and edit text. Just as importantly, it allows standardization, in terms of both key strokes and customization methods, across all applications that use it.

readline provides default editing in either of two modes: vi or emacs. Both modes provide a subset of the editing commands found in the full editors. We've already looked at the command sets of these modes in the previous sections of this chapter. We'll now look at how you can make your own command sets.

readline gives bash added flexibility compared to other shells because it can be customized through the use of key bindings, either from the command line or in a special startup file. You can also set readline variables. We'll see how you can set up readline using your own startup file now, and then go on to examine how the binding capability can be used from the command line.

The readline Startup File

The default startup file is called .inputrc and must exist in your home directory if you wish to customize readline. You can change the default filename by setting the environment variable INPUTRC (see Chapter 3 for further information on environment variables).

When bash starts up, it reads the startup file (if there is one) and any settings there come into effect. The startup file is just a sequence of lines that bind a keyname to a macro or readline function name. You can also place comments in the file by preceding any line with a #.

You can use either an English name or a key escape sequence for the keyname. For example, to bind CTRL-T to the movement command for moving to the end of the current line, you could place Control-t: end-of-line in your .inputrc. If you wanted to use a key escape sequence you could have put "\C-t<">: end-of-line. The \C- is the escape sequence prefix for Control. The advantage of the key sequence is that you can specify a sequence of keys for an action. In our example, once readline has read this line, typing a CTRL-T will cause the cursor to move to the end of the line.

The end-of-line in the previous example is a readline function. There are over 60 functions that allow you to control everything from cursor motions to changing text and command completion (for a complete list, see the bash manual page). All of the emacs and vi editing mode commands that we looked at in this chapter have associated functions. This allows you to customize the default modes or make up completely new ones using your own key sequences.

Besides the readline functions, you can also bind a macro to a key sequence. A macro is simply a sequence of keystrokes inside single or double quotes. Typing the key sequence causes the keys in the macro to be entered as though you had typed them. For example, we could bind some text to CTRL-T; "\C-t<">: <">Curiouser and curiouser!<">. Hitting CTRL-T would cause the phrase Curiouser and curiouser! to appear on the command line.

If you want to use single or double quotes in your macros or key sequence, you can escape them by using a backslash (\). Table 2-18 lists the common escape sequences.

Table 2-18. Escape sequences

Sequence

Description

\C-

Control key prefix

\M-

Meta (Escape) key prefix

\e

The escape character

\\

The backslash character (\)

\<">

The double quote character (<">)

\'

The single quote character (')

readline also allows simple conditionals in the .inputrc. There are three directives: $if, $else, and $endif. The conditional of the $if can be an editing mode, a terminal type, or an application-specific condition.

To test for an editing mode, you can use the form mode= and test for either vi or emacs. For instance, to set up readline so that setting CTRL-T will take place only in emacs mode, you could put the following in your .inputrc:

$if mode=emacs
"\C-t": "Curiouser and curiouser!"
$endif

Likewise, to test for a terminal type, you can use the form term=. You must provide the full terminal name on the right-hand side of the test. This is useful when you need a terminal-specific key binding. You may, for instance, want to bind the function keys of a particular terminal type to key sequences.

If you have other applications that use readline, you might like to keep your bash-specific bindings separate. You can do this with the last of the conditionals. Each application that uses readline sets its own variable, which you can test for. To test for bash specifics, you could put $if bash into your .inputrc.

readline variables

readline has its own set of variables that you can set from within your .inputrc. Table 2-19 lists them.[10]

Table 2-19. readline variables

Variable

Description

bell-style

If set to none, readline never rings the bell (beeps). If set to visible, readline will attempt to use a visible bell. If set to audible, it will attempt to ring the bell. The default is audible.

comment-begin

The string to insert when the readline insert-comment command is executed. The default is a #.

completion-query-items

Determines when the user is asked to see further completions if the number of completions is greater than that given. The default is 100.

convert-meta

If set to On, converts characters with the eighth bit set to an ASCII key sequence by stripping the eighth bit and prepending an escape character. The default is On.

disable-completion

If set to On, inhibits word completion. Completion characters will be inserted into the line as if they had been mapped to self-insert. The default is Off.

editing-mode

Sets the editing mode to vi or emacs.

enable-keypad

If set to On, readline tries to enable the keyboard's application keypad when it is called. Some systems need this to enable the arrow keys. The default is Off.

expand-tilde

If set to On, tilde expansion is attempted when readline attempts word completion. The default is Off.

horizontal-scroll-mode

Set to On means that lines will scroll horizontally if you type beyond the right-hand side of the screen. The default is Off, which wraps the line onto a new screen line.

input-meta

If set to On, eight-bit input will be accepted. The default is Off. This is synonymous with meta-flag.

keymap

Sets readline's current keymap for bindings. Acceptable names are emacs, emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move, vi-command and vi-insert. The default is emacs. Note that the value of editing-mode also affects the keymap.

mark-directories

If set to On, completed directory names have a slash appended.

mark-modified-lines

If set to On, displays an asterisk at the start of history lines that have been modified. The default is Off.

meta-flag

If set to On, eight-bit input will be accepted. The default is Off.

output-meta

If set to On, displays characters with the eighth bit set directly. The default is Off.

show-all-if-ambiguous

If set to On, words with more than one possible completion are listed instead of ringing the bell. The default is Off.

visible-stats

If set to On, a character denoting a file's type as reported by the stat system call is appended to the filename when listing possible completions. The default is Off.

To set any of the variables, you can use the set command in your .inputrc. For example, to set vi-mode when you start up, you could place the line set editing-mode vi in your .inputrc. Every time bash starts it would change to vi-mode.

Key Bindings Using bind

If you want to try out key bindings or you want to see what the current settings are, you can do it from the bash command line by using the bind command. The binding syntax is the same as that of the .inputrc file, but you have to surround each binding in quotes so that it is taken as one argument.

To bind a string to CTRL-T, we could type bind `"\C-t<">: <">Curiouser and curiouser!"'. This would bind the given string to CTRL-T just as in the .inputrc, except that the binding will apply only to the current shell and will cease once you log out.

bind also allows you to print out the bindings currently in effect by typing bind -P.[11] If you do so, you'll see things like:

               abort can be found on "\C-g", "\C-x\C-g", "\e\C-g".
               accept-line can be found on "\C-j", "\C-m".
               alias-expand-line is not bound to any keys
               arrow-key-prefix is not bound to any keys
               backward-char can be found on "\C-b", "\eOD", "\e[D".
               ...

If you just want to see the names of the readline functions, you can use bind -l.

You can also unbind a function by using bind -u along with the name of the function; all keys for that function will then be unbound. Unbinding a key sequence can be done with bind -r followed by the sequence.

bind -x is useful if you want to bind a shell command to a key sequence. For example, bind -x `"\C-l":ls' binds CTRL-L to the ls command. Hitting CTRL-L would then give a directory listing.

Another option you might find useful is -p. This prints out the bindings to standard output in a format that can be re-read by bind, or used as a .inputrc file. So, to create a complete .inputrc file that you can then edit, you could type bind -p > .inputrc.

To read the file back in again you can use another option, -f. This option takes a filename as its argument and reads the key bindings from that file. You can also use it to update the key bindings if you've just modified your .inputrc.

[10] The variables disable-completion, enable-keypad, input-meta, mark-directories, and visible-stats are not available in versions of bash prior to 2.0.

[11] Versions of bash prior to 2.0 use -d instead of -p, and -v instead of -P. Also, the -r, -V, -S, -s, -u, and the new -v and -x options are not available in these older versions.

Keyboard Habits

In this chapter we have seen that bash provides command-line editing with two modes: vi and emacs. You may be wondering why these two editors were chosen. The primary reason is because vi and emacs are the most widely used editors for UNIX. People who have used either editor will find familiar editing facilities.

If you are not familiar with either of these editors, you should seriously consider adopting emacs-mode keyboard habits. Because it is based on control keys and doesn't require you to think in terms of a "command mode" and "insert mode," you will find emacs-mode easier to assimilate. Although the full emacs is an extremely powerful editor, its command structure lends itself very well to small subsetting: there are several "mini-emacs" editors floating around for UNIX, MS-DOS, and other systems.

The same cannot be said for vi, because its command structure is really meant for use in a full-screen editor. vi is quite powerful too, in its way, but its power becomes evident only when it is used for purposes similar to that for which it was designed: editing source code in C and LISP. As mentioned earlier, a vi user has the power to move mountains in few keystrokes—but at the cost of being unable to do anything meaningful in very few keystrokes. Unfortunately, the latter is most desired in a command interpreter, especially nowadays when users are spending more time within applications and less time working with the shell. In short, if you don't already know vi, you will probably find its commands obscure and confusing.

Both bash editing modes have quite a few commands; you will undoubtedly develop keyboard habits that include just a few of them. If you use emacs-mode and you aren't familiar with the full emacs, here is a subset that is easy to learn yet enables you to do just about anything:

For cursor motion around a command line, stick to CTRL-A and CTRL-E for beginning and end of line, and CTRL-F and CTRL-B for moving around.

Delete using DEL (or whatever your "erase" key is) and CTRL-D; as with CTRL-F and CTRL-B, hold down to repeat if necessary. Use CTRL-K to erase the entire line.

Use CTRL-P and CTRL-N (or the up and down arrow keys) to move through the command history.

Use CTRL-R to search for a command you need to run again.

Use TAB for filename completion.

After a few hours spent learning these keystrokes, you will wonder how you ever got along without command-line editing.

Chapter 3. Customizing Your Environment

An environment is a collection of concepts that express the things a computer system or other set of tools does in terms designed to be understandable and coherent, and a look and feel that is comfortable. For example, your desk at work is an environment. Concepts involved in desk work usually include memos, phone calls, letters, forms, etc. The tools on or in your desk that you use to deal with these things include paper, staples, envelopes, pens, a telephone, a calculator, etc. Every one of these has a set of characteristics that express how you use it; such characteristics range from location on your desk or in a drawer (for simple tools) to more sophisticated things like which numbers the memory buttons on your phone are set to. Taken together, these characteristics make up your desk's look and feel.

You customize the look and feel of your desk environment by putting pens where you can most easily reach them, programming your phone buttons, etc. In general, the more customization you have done, the more tailored to your personal needs—and therefore the more productive—your environment is.

Similarly, UNIX shells present you with such concepts as files, directories, and standard input and output, while UNIX itself gives you tools to work with these, such as file manipulation commands, text editors, and print queues. Your UNIX environment's look and feel is determined by your keyboard and display, of course, but also by how you set up your directories, where you put each kind of file, and what names you give to files, directories, and commands. There are also more sophisticated ways of customizing your shell environment.

This chapter will look at the four most important features that bash provides for customizing your environment.

Special files

The files .bash_profile, .bash_logout, and .bashrc that are read by bash when you log in and out or start a new shell.

Aliases

Synonyms for commands or command strings that you can define for convenience.

Options

Controls for various aspects of your environment that you can turn on and off.

Variables

Changeable values that are referred to by a name. The shell and other programs can modify their behavior according to the values stored in the variables.

Although these features are not the only ones available, they form the basis for doing more advanced customization. They are also the features that are common to the various shells available on UNIX. Later chapters will cover more advanced shell features, such as the ability to program the shell.

The .bash_profile, .bash_logout, and .bashrc Files

Three files in your home directory have a special meaning to bash, providing a way for you to set up your account environment automatically when you log in and when you invoke another bash shell, and allowing you to perform commands when you log out. These files may already exist in your home directory, depending on how your system administrator has set up your account. If they don't exist, your account is using only the default system file /etc/profile. You can easily create your own bash files using your favorite text editor. If you are unfamiliar with text editors available under UNIX, we suggest that you familiarize yourself with one of the better-known ones such as vi or emacs before proceeding further with the techniques described in this chapter.

The most important bash file, .bash_profile, is read and the commands in it executed by bash every time you log in to the system. If you examine your .bash_profile you will probably see lines similar to:

PATH=/sbin:/usr/sbin:/bin:/usr/bin:/usr/local/bin
SHELL=/bin/bash
MANPATH=/usr/man:/usr/X11/man
EDITOR=/usr/bin/vi

PS1='\h:\w\$ '
PS2='> '
export EDITOR

These lines define the basic environment for your login account. For the moment, it is probably best to leave these lines alone until you understand what they do. When editing your .bash_profile, just add your new lines after the existing ones.

Note that whatever you add to your .bash_profile won't take effect until the file is re-read by logging out and then logging in again. Alternatively, you can also use the source command.[1] For example:

source .bash_profile

source executes the commands in the specified file, in this case .bash_profile, including any commands that you have added.

bash allows two synonyms for .bash_profile: .bash_login, derived from the C shell's file named .login, and .profile, derived from the Bourne shell and Korn shell files named .profile. Only one of these three is read when you log in. If .bash_profile doesn't exist in your home directory, then bash will look for .bash_login. If that doesn't exist it will look for .profile.

One advantage of bash's ability to look for either synonym is that you can retain your .profile if you have been using the Bourne shell. If you need to add bash-specific commands, you can put them in .bash_profile followed by the command source .profile. When you log in, all the bash-specific commands will be executed, and bash will source .profile, executing the remaining commands. If you decide to switch to using the Bourne shell you don't have to modify your existing files. A similar approach was intended for .bash_login and the C shell .login, but due to differences in the basic syntax of the shells, this is not a good idea.

.bash_profile is read and executed only by the login shell. If you start up a new shell (a subshell) by typing bash on the command line, it will attempt to read commands from the file .bashrc. This scheme allows you the flexibility to separate startup commands needed at login time from those you might need when you run a subshell. If you need to have the same commands run regardless of whether it is a login shell or a subshell, you can just use the source command from within .bash_profile to execute .bashrc. If .bashrc doesn't exist then no commands are executed when you start up a subshell.

The file .bash_logout is read and executed every time a login shell exits. It is provided to round out the capabilities for customizing your environment. If you wanted to execute some commands that remove temporary files from your account or record how much time you have spent logged in to the system then you would place the commands in .bash_logout. This file doesn't have to exist in your account—if it isn't there when you log out, then no extra commands are executed.

[1] You can also use the synonymous command dot (.).

Aliases

If you have used UNIX for any length of time you will have noticed that there are many commands available and that some of them have cryptic names. Sometimes the commands you use the most have a string of options and arguments that need to be specified. Wouldn't it be nice if there was a feature that let you rename the commands or allowed you to type in something simple instead of half a dozen options? Fortunately, bash provides such a feature: the alias.[2]

Aliases can be defined on the command line, in your .bash_profile, or in your .bashrc, using this form:

alias name=command

This syntax specifies that name is an alias for command. Whenever you type name as a command, bash will substitute command in its place when it executes the line. Notice that there are no spaces on either side of the equal sign (=); this is the required syntax.

There are a few basic ways to use an alias. The first, and simplest, is as a more mnemonic name for an existing command. Many commonly used UNIX commands have names that are poor mnemonics and are therefore excellent candidates for aliasing, the classic example being:

alias search=grep

grep, the UNIX file-searching utility, was named as an acronym for something like "Generalized Regular Expression Parser."[3] This acronym may mean something to a computer scientist, but not to the office administrator who has to find Fred in a list of phone numbers. If you have to find Fred and you have the word search defined as an alias for grep, you can type:

$ search Fred phonelist

Some people who aren't particularly good typists like to use aliases for typographical errors they make often. For example:

alias emcas=emacs
alias mali=mail
alias gerp=grep

This can be handy, but we feel you're probably better off suffering with the error message and getting the correct spelling under your fingers. Another common way to use an alias is as a shorthand for a longer command string. For example, you may have a directory to which you need to go often. It's buried deep in your directory hierarchy, so you want to set up an alias that will allow you to cd there without typing (or even remembering) the entire pathname:

alias cdvoy='cd sipp/demo/animation/voyager'

Notice the quotes around the full cd command; these are necessary if the string being aliased consists of more than one word.[4]

As another example, a useful option to the ls command is -F: it puts a slash (/) after directory files and an asterisk (*) after executable files. Since typing a dash followed by a capital letter is inconvenient, many people define an alias like this:

alias lf='ls -F'

A few things about aliases are important to remember. First, bash makes a textual substitution of the alias for that which it is aliasing; it may help to imagine bash passing your command through a text editor or word processor and issuing a "change" or "substitute" command before interpreting and executing it. Any special characters (such as wildcards like * and ?) that result when the alias is expanded are interpreted properly by the shell. [5] For example, to make it easier to print all of the files in your directory, you could define the alias:

alias printall='pr * | lpr'

Second, keep in mind that aliases are recursive, which means that it is possible to alias an alias. A legitimate objection to the previous example is that the alias, while mnemonic, is too long and doesn't save enough typing. If we want to keep this alias but add a shorter abbreviation, we could define:

alias pa=printall

With recursive aliasing available it would seem possible to create an infinite loop:

alias ls='ls -l'

bash ensures that this loop cannot happen, because only the first word of the replacement text is checked for further aliasing; if that word is identical to the alias being expanded, it is not expanded a second time. The above command will work as expected (typing ls produces a long list with permissions, sizes, owners, etc.), while in more meaningless situations such as:

alias listfile=ls
alias ls=listfile

the alias listfile is ignored.

Aliases can be used only for the beginning of a command string—albeit with certain exceptions. In the cd example above, you might want to define an alias for the directory name alone, not for the entire command. But if you define:

alias anim=sipp/demo/animation/voyager

and then type cd anim, bash will probably print a message like anim: No such file or directory.

An obscure feature of bash's alias facility—one not present in the analogous C shell feature—provides a way around this problem. If the value of an alias (the right side of the equal sign) ends in a blank, then bash tries to do alias substitution on the next word on the command line. To make the value of an alias end in a blank, you need to surround it with quotes.

Here is how you would use this capability to allow aliases for directory names, at least for use with the cd command. Just define:

alias cd='cd '

This causes bash to search for an alias for the directory name argument to cd, which in the previous example would enable it to expand the alias anim correctly.

Another way to define a directory variable for use with the cd command is to use the environment variable cdable_vars, discussed later in this chapter.

Finally, there are a few useful adjuncts to the basic alias command. If you type alias name without an equal sign (=) and value, the shell will print the alias's value or alias name not found if it is undefined. If you type alias without any arguments, you get a list of all the aliases you have defined. The command unalias name removes any alias definition for its argument.

Aliases are very handy for creating a comfortable environment, but they have essentially been superseded by shell scripts and functions, which we will look at in the next chapter. These give you everything aliases do plus much more, so if you become proficient at them, you may find that you don't need aliases anymore. However, aliases are ideal for novices who find UNIX to be a rather forbidding place, full of terseness and devoid of good mnemonics. Chapter 4 shows the order of precedence when, for example, an alias and a function have the same name.

[2] C shell users should note that the bash alias feature does not support arguments in alias expansions, as C shell aliases do. This functionality is provided by functions, which we'll look at in Chapter 4.

[3] Another theory has it that grep stands for the command "g/re/p", in the old ed text editor, which does essentially the same thing as grep.

[4] This contrasts with C shell aliases, in which the quotes aren't required.

[5] An important corollary: wildcards and other special characters cannot be used in the names of aliases, i.e., on the left side of the equal sign.

Options

While aliases let you create convenient names for commands, they don't really let you change the shell's behavior. Options are one way of doing this. A shell option is a setting that is either "on" or "off." While several options relate to arcane shell features that are of interest only to programmers, those that we will cover here are of interest to all users.

The basic commands that relate to options are set -o optionname and set +o optionname. You can change more than one option with the one set command by preceding each optionname with a -o or +o. The use of plus (+) and minus (-) signs is counterintuitive: the - turns the named option on, while the + turns it off. The reason for this incongruity is that the dash (-) is the conventional UNIX way of specifying options to a command, while the use of + is an afterthought.

Most options also have one-letter abbreviations that can be used in lieu of the set -o command; for example, set -o noglob can be abbreviated set -f. These abbreviations are carryovers from the Bourne shell. Like several other "extra" bash features, they exist to ensure upward compatibility; otherwise, their use is not encouraged.

Table 3-1 lists the options that are useful to general UNIX users. All of them are off by default except as noted.

Table 3-1. Basic shell options

Option

Description

emacs

Enters emacs editing mode (on by default)

ignoreeof

Doesn't allow use of a single CTRL-D to log off; use the exit command to log off immediately (this has the same effect as setting the shell variable IGNOREEOF=10)

noclobber

Doesn't allow output redirection (>) to overwrite an existing file

noglob

Doesn't expand filename wildcards like * and ? (wildcard expansion is sometimes called globbing)

nounset

Indicates an error when trying to use a variable that is undefined

vi

Enters vi editing mode

There are several other options (21 in all; Appendix B lists them). To check the status of an option, just type set -o. bash will print a list of all options along with their settings.

shopt

bash 2.0 introduced a new built-in for configuring shell behaviour, shopt. This built-in is meant as a replacement for option configuration originally done through environment variables and the set command. [6]

The shopt -o functionality is a duplication of parts of the set command and is provided for completeness on the part of shopt, while retaining backward compatibility by its continued inclusion in set.

The format for this command is shopt options option-names. Table 3-2 lists shopt's options.

Table 3-2. Options to shopt

Option

Meaning

-p

Displays a list of the settable options and their current values

-s

Sets each option name

-u

Unsets each option name

-q

Suppresses normal output; the return status indicates if a variable is set or unset

-o

Allows the values of the option names to be those defined for the -o option of the set command

The default action is to unset (turn off) the named options. If no options and arguments are given, or the -p option is used, shopt displays a list of the settable options and the values that they currently have. If -s or -u is also given, the list is confined to only those options that are set or unset, respectively.

A list of the most useful option names is given in Table 3-3. A complete list is given in Appendix B.

Table 3-3. shopt option names

Option

Meaning

cdable_vars

If set, an argument to the cd built-in command that is not a directory is assumed to be the name of a variable whose value is the directory to change to.

checkhash

If set, bash checks that a command found in the hash table exists before trying to execute it. If a hashed command no longer exists, a normal path search is performed.

cmdhist

If set, bash attempts to save all lines of a multiple-line command in the same history entry.

dotglob

If set, bash includes filenames beginning with a . (dot) in the results of pathname expansion.

execfail

If set, a non-interactive shell will not exit if it cannot execute the file specified as an argument to the exec command. An interactive shell does not exit if exec fails.

histappend

If set, the history list is appended to the file named by the value of the HISTFILE variable when the shell exits, rather than overwriting the file.

lithist

If set, and the cmdhist option is enabled, multiline commands are saved to the history with embedded newlines, rather than using semicolon separators where possible.

mailwarn

If set, and a file that bash is checking for mail has been accessed since the last time it was checked, the message "The mail in mailfile has been read" is displayed.

We'll look at the use of the various options later in this chapter.

[6] Appendix B provides a complete list of shopt shell options and the corresponding environment variables in earlier versions of the shell.

Shell Variables

There are several characteristics of your environment that you may want to customize but that cannot be expressed as an on/off choice. Characteristics of this type are specified in shell variables. Shell variables can specify everything from your prompt string to how often the shell checks for new mail.

Like an alias, a shell variable is a name that has a value associated with it. bash keeps track of several built-in shell variables; shell programmers can add their own. By convention, built-in variables should have names in all capital letters. bash does, however, have two exceptions.[7] The syntax for defining variables is somewhat similar to the syntax for aliases:

            varname=value

There must be no space on either side of the equal sign, and if the value is more than one word, it must be surrounded by quotes. To use the value of a variable in a command, precede its name by a dollar sign ($).

You can delete a variable with the command unset varname. Normally this isn't useful, since all variables that don't exist are assumed to be null, i.e., equal to the empty string "". But if you use the set option nounset, which causes the shell to indicate an error when it encounters an undefined variable, then you may be interested in unset.

The easiest way to check a variable's value is to use the echo built-in command. All echo does is print its arguments, but not until the shell has evaluated them. This includes—among other things that will be discussed later—taking the values of variables and expanding filename wildcards. So, if the variable wonderland has the value alice, typing:

$ echo "$wonderland"

will cause the shell to simply print alice. If the variable is undefined, the shell will print a blank line. A more verbose way to do this is:

$ echo "The value of \$
            varname
            is \"$
            varname
            \"."

The first dollar sign and the inner double quotes are backslash-escaped (i.e., preceded with \ so the shell doesn't try to interpret them—see Chapter 1) so they appear literally in the output, which for the above example would be:

The value of $wonderland is "alice".

Variables and Quoting

Notice that we used double quotes around variables (and strings containing them) in these echo examples. In Chapter 1, we said that some special characters inside double quotes are still interpreted, while none are interpreted inside single quotes.

A special character that "survives" double quotes is the dollar sign—meaning that variables are evaluated. It's possible to do without the double quotes in some cases; for example, we could have written the above echo command this way:

$ echo The value of \$
               varname
               is \"$
               varname\".

But double quotes are more generally correct. Here's why. Suppose we did this:

$ fred='Four spaces between these words.'

Then if we entered the command echo $fred, the result would be:

Four spaces between these words.

What happened to the extra spaces? Without the double quotes, the shell splits the string into words after substituting the variable's value, as it normally does when it processes command lines. The double quotes circumvent this part of the process (by making the shell think that the whole quoted string is a single word).

Therefore the command echo "$fred" prints this:

Four spaces between these    words.

The distinction between single and double quotes becomes particularly important when we start dealing with variables that contain user or file input later on.

Double quotes also allow other special characters to work, as we'll see in Chapter 4, Chapter 6, and Chapter 7. But for now, we'll revise the "When in doubt, use single quotes" rule in Chapter 1 by adding, "...unless a string contains a variable, in which case you should use double quotes."

Built-In Variables

As with options, some built-in shell variables are meaningful to general UNIX users, while others are arcana for hackers. We'll look at the more generally useful ones here, and we'll save some of the more obscure ones for later chapters. Again, Appendix B contains a complete list.

Editing mode variables

Several shell variables relate to the command-line editing modes that we saw in the previous chapter. These are listed in Table 3-4.

Table 3-4. Editing mode variables

Variable

Meaning

HISTCMD

The history number of the current command.

HISTCONTROL

A list of patterns, separated by colons (:), which can have the following values. ignorespace: lines beginning with a space are not entered into the history list. ignoredups: lines matching the last history line are not entered. erasedups: all previous lines matching the current line are removed from the history list before the line is saved. ignoreboth: enables both ignorespace and ignoredups. [8]

HISTIGNORE

A list of patterns, separated by colons (:), used to decide which command lines to save in the history list. Patterns are considered to start at the beginning of the command line and must fully specify the line, i.e., no wildcard (*) is implicitly appended. The patterns are checked against the line after HISTCONTROL is applied. An ampersand (&) matches the previous line. An explicit & may be generated by escaping it with a backslash.[9]

HISTFILE

Name of history file in which the command history is saved. The default is ~/.bash_history.

HISTFILESIZE

The maximum number of lines to store in the history file. The default is 500. When this variable is assigned a value, the history file is truncated, if necessary, to the given number of lines.

HISTSIZE

The maximum number of commands to remember in the command history. The default is 500.

HISTTIMEFORMAT

If it is set and not null, its value is used as a format string for strftime(3) to print the time stamp associated with each history entry displayed by the history command. Time stamps are written to the history file so they may be preserved across shell sessions.[10]

FCEDIT

Pathname of the editor to use with the fc command.

[8] history_control is synonymous with HISTCONTROL in versions of bash prior to 2.0. Versions prior to 1.14 only define history_control. ignoreboth is not available in bash versions prior to 1.14. HISTCONTROL is a colon-separated list, and erasedups has been added in bash 3.0 and later.

[9] This variable is not available in versions of bash prior to 2.0.

[10] This variable is not available in versions of bash prior to 3.0.

In the previous chapter, we saw how bash numbers commands. To find out the current command number in an interactive shell, you can use the HISTCMD. Note that if you unset HISTCMD, it will lose its special meaning, even if you subsequently set it again.

We also saw in the last chapter how bash keeps the history list in memory and saves it to a file when you exit a shell session. The variables HISTFILESIZE and HISTSIZE allow you to set the maximum number of lines that the shell saves in the history file, and the maximum number of lines to "remember" in the history list, i.e., the lines that it displays with the history command.

Suppose you wanted to maintain a small history file in your home directory. By setting HISTFILESIZE to 100, you immediately cause the history file to allow a maximum of 100 lines. If it is already larger than the size you specify, it will be truncated.

HISTSIZE works in the same way, but only on the history that the current shell has in memory. When you exit an interactive shell, HISTSIZE will be the maximum number of lines saved in your history file. If you have already set HISTFILESIZE to be less than HISTSIZE, the saved list will be truncated.

You can also cut down on the size of your history file and history list by use of the HISTCONTROL variable. This is a colon-separated list of values. If it includes ignorespace, any commands that you type that start with a space won't appear in the history. Even more useful is the ignoredups option. This discards consecutive entries from the history list that are duplicated. Suppose you want to monitor the size of a file with ls as it is being created. Normally, every time you type ls it will appear in your history. By setting HISTCONTROL to ignoredups, only the first ls will appear in the history.

The variable HISTIGNORE allows you to specify a list of patterns which the command line is checked against. If the command line matches one of the patterns, it is not entered into the history list. You can also request that it ignore duplicates by using the pattern &.

For example, suppose you didn't want any command starting with l, nor any duplicates, to appear in the history. Setting HISTIGNORE to l*:& will do just that. Just as with other pattern matching we have seen, the wildcard after the l will match any command line starting with that letter.

Another useful variable is HISTTIMEFORMAT, which prepends a time stamp to each history entry showing when the command was executed. If it is unset or the value is null then no time stamp is written. If a format is given then time stamps are inserted using the specified format as part of the history and are shown with the history command.

The time stamp formats are shown in Table 3-5. Some of the results will be displayed using the particular format for the underlying locale, e.g., weekday names will be translated into the language being used on the system.

Table 3-5. Time stamp formats

Format

Replaced by

%a

The locale's abbreviated weekday name

%A

The locale's full weekday name

%b

The locale's abbreviated month name

%B

The locale's full month name

%c

The locale's appropriate date and time representation

%C

The century number (the year divided by 100 and truncated to an integer) as a decimal number [00-99]

%d

The day of the month as a decimal number [01-31]

%D

The date in American format; the same value as %m/%d/%y.

%e

The day of the month as a decimal number [1-31]; a single digit is preceded by a space

%h

The same as %b

%H

The hour (24-hour clock) as a decimal number [00-23]

%I

The hour (12-hour clock) as a decimal number [01-12]

%j

The day of the year as a decimal number [001-366]

%m

The month as a decimal number [01-12]

%M

The minute as a decimal number [00-59]

%n

A newline character

%p

The locale's equivalent of either a.m. or p.m

%r

The time in a.m. and p.m. notation; in the POSIX locale this is equivalent to %I:%M:%S %p

%R

The time in 24-hour notation (%H:%M)

%S

The second as a decimal number [00-61]

%t

A tab character

%T

The time (%H:%M:%S)

%u

The weekday as a decimal number [1-7], with 1 representing Monday

%U

The week number of the year (Sunday as the first day of the week) as a decimal number [00-53]

%V

The week number of the year (Monday as the first day of the week) as a decimal number [01-53]; if the week containing 1 January has four or more days in the new year, then it is considered week 1—otherwise, it is the last week of the previous year, and the next week is week 1

%w

The weekday as a decimal number [0-6], with 0 representing Sunday

%W

The week number of the year (Monday as the first day of the week) as a decimal number [00-53]; all days in a new year preceding the first Monday are considered to be in week 0

%x

The locale's appropriate date representation

%X

The locale's appropriate time representation

%y

The year without century as a decimal number [00-99]

%Y

The year with century as a decimal number

%Z

The timezone name or abbreviation, or by nothing if no timezone information exists

%%

%

If you wanted to have the date and time with each history entry, you could put:

HISTTIMEFORMAT="%y/%m/%d %T "

then the output of the history command would look something like:

...
78 04/11/26 17:14:05 HISTTIMEFORMAT="%y/%m/%d %T "
79 04/11/26 17:14:08 ls -l
80 04/11/26 17:14:09 history

If the history has never had a date format set before then all of the entries prior to setting the variable will get the time stamp of the time the variable was set. If you set HISTTIMEFORMAT to null and then set it to a format, the previous time stamps are retained and displayed in the new format.

Mail variables

Since the mail program is not running all the time, there is no way for it to inform you when you get new mail; therefore the shell does this instead.[11] The shell can't actually check for incoming mail, but it can look at your mail file periodically and determine whether the file has been modified since the last check. The variables listed in Table 3-6 let you control how this works.

Table 3-6. Mail variables

Variable

Meaning

MAIL

Name of file to check for incoming mail

MAILCHECK

How often, in seconds, to check for new mail (default 60 seconds)

MAILPATH

List of filenames, separated by colons (:), to check for incoming mail

Under the simplest scenario, you use the standard UNIX mail program, and your mail file is /usr/mail/yourname or something similar. In this case, you would just set the variable MAIL to this filename if you want your mail checked:

MAIL=/usr/mail/yourname

If your system administrator hasn't already done it for you, put a line like this in your .bash_profile.

However, some people use nonstandard mailers that use multiple mail files; MAILPATH was designed to accommodate this. bash will use the value of MAIL as the name of the file to check, unless MAILPATH is set; in which case, the shell will check each file in the MAILPATH list for new mail. You can use this mechanism to have the shell print a different message for each mail file: for each mail filename in MAILPATH, append a question mark followed by the message you want printed.

For example, let's say you have a mail system that automatically sorts your mail into files according to the username of the sender. You have mail files called /usr/mail/you/martin, /usr/mail/you/geoffm, /usr/mail/you/paulr, etc. You define your MAILPATH as follows:

MAILPATH=/usr/mail/you/martin:/usr/mail/you/geoffm:\
/usr/mail/you/paulr

If you get mail from Martin Lee, the file /usr/mail/you/martin will change. bash will notice the change within one minute and print the message:

You have new mail in /usr/mail/you/martin

If you are in the middle of running a command, the shell will wait until the command finishes (or is suspended) to print the message. To customize this further, you could define MAILPATH to be:

MAILPATH="\
/usr/mail/you/martin?You have mail from Martin.:\
/usr/mail/you/geoffm?Mail from Geoff has arrived.:\
/usr/mail/you/paulr?There is new mail from Paul."

The backslashes at the end of each line allow you to continue your command on the next line. But be careful: you can't indent subsequent lines. Now, if you get mail from Martin, the shell will print:

You have mail from Martin.

You can also use the variable $_ in the message to print the name of the current mail file. For example:

MAILPATH='/usr/mail/you?You have some new mail in $_'

When new mail arrives, this will print the line:

You have some new mail in /usr/mail/you

The ability to receive notification of mail can be switched on and off by using the mailwarn option to the shopt command.

Prompting variables

If you have seen enough experienced UNIX users at work, you may already have realized that the shell's prompt is not engraved in stone. Many of these users have all kinds of things encoded in their prompts. It is possible to put useful information into the prompt, including the date and the current directory. We'll give you some of the information you need to modify your own here; the rest will come in the next chapter.

Actually , bash uses four prompt strings. They are stored in the variables PS1, PS2, PS3, and PS4. The first of these is called the primary prompt string; it is your usual shell prompt, and its default value is "\s-\v\$ ".[12] Many people like to set their primary prompt string to something containing their login name. Here is one way to do this:

PS1="\u--> "

The \u tells bash to insert the name of the current user into the prompt string. If your user name is alice, your prompt string will be "alice—>". If you are a C shell user and, like many such people, are used to having a history number in your prompt string, bash can do this similarly to the C shell: if the sequence \! is used in the prompt string, it will substitute the history number. Thus, if you define your prompt string to be:

PS1="\u \!--> "

then your prompts will be like alice 1—>, alice 2—>, and so on.

But perhaps the most useful way to set up your prompt string is so that it always contains your current directory. This way, you needn't type pwd to remember where you are. Here's how:

PS1="\w--> "

Table 3-7 lists the prompt customizations that are available.[13]

Table 3-7. Prompt string customizations

Command

Meaning

\a

The ASCII bell character (007)

\A

The current time in 24-hour HH:MM format

\d

The date in "Weekday Month Day" format

\D {format}

The format is passed to strftime(3) and the result is inserted into the prompt string; an empty format results in a locale-specific time representation; the braces are required

\e

The ASCII escape character (033)

\H

The hostname

\h

The hostname up to the first "."

\j

The number of jobs currently managed by the shell

\l

The basename of the shell's terminal device name

\n

A carriage return and line feed

\r

A carriage return

\s

The name of the shell

\T

The current time in 12-hour HH:MM:SS format

\t

The current time in HH:MM:SS format

\@

The current time in 12-hour a.m./p.m. format

\u

The username of the current user

\v

The version of bash (e.g., 2.00)

\V

The release of bash; the version and patchlevel (e.g., 2.00.0)

\w

The current working directory

\W

The basename of the current working directory

\#

The command number of the current command

\!

The history number of the current command

\$

If the effective UID is 0, print a #, otherwise print a $

\nnn

Character code in octal

\\

Print a backslash

\[

Begin a sequence of non-printing characters, such as terminal control sequences

\]

End a sequence of non-printing characters

PS2 is called the secondary prompt string; its default value is >. It is used when you type an incomplete line and hit RETURN, as an indication that you must finish your command. For example, assume that you start a quoted string but don't close the quote. Then if you hit RETURN, the shell will print > and wait for you to finish the string:

$ echo "This is a long line,
                  # PS1 for the command
> which is terminated down here"
                  # PS2 for the continuation
                  $
                  # PS1 for the next command

PS3 and PS4 relate to shell programming and debugging. They will be explained in Chapter 5, and Chapter 9.

Command search path

Another important variable is PATH, which helps the shell find the commands you enter.

As you probably know, every command you use is actually a file that contains code for your machine to run.[14] These files are called executable files or just executables for short. They are stored in various directories. Some directories, like /bin or /usr/bin, are standard on all UNIX systems; some depend on the particular version of UNIX you are using; some are unique to your machine; if you are a programmer, some may even be your own. In any case, there is no reason why you should have to know where a command's executable file is in order to run it.

That is where PATH comes in. Its value is a list of directories that the shell searches every time you enter a command;[15] the directory names are separated by colons (:), just like the files in MAILPATH.

For example, if you type echo $PATH, you will see something like this:

/bin:/usr/bin:/usr/local/bin:/usr/X386/bin

Why should you care about your path? There are two main reasons. First, once you have read the later chapters of this book and you try writing your own shell programs, you will want to test them and eventually set aside a directory for them. Second, your system may be set up so that certain restricted commands' executable files are kept in directories that are not listed in PATH. For example, there may be a directory /usr/games in which there are executables that are verboten during regular working hours.

Therefore you may want to add directories to your PATH. Let's say you have created a bin directory under your login directory, which is /home/you, for your own shell scripts and programs. To add this directory to your PATH so that it is there every time you log in, put this line in your .bash_profile:

PATH=$PATH":/home/you/bin"

This line sets PATH to whatever it was before, followed immediately by a colon and /home/you/bin.

This is the safe way of doing it. When you enter a command, the shell searches directories in the order they appear in PATH until it finds an executable file. Therefore, if you have a shell script or program whose name is the same as an existing command, the shell will use the existing command—unless you type in the command's full pathname to make it clear. For example, if you have created your own version of the more command in the above directory and your PATH is set up as in the last example, you will need to type /home/you/bin/more (or just ~/bin/more) to get your version.

The more reckless way of resetting your path is to put your own directory before the other directories:

PATH="/home/you/bin:"$PATH

This is unsafe because you are trusting that your own version of the more command works properly. But it is also risky for a more important reason: system security. If your PATH is set up in this way, you leave open a "hole" that is well known to computer crackers and mischief makers: they can install "Trojan horses" and do other things to steal files or do damage. (See Chapter 10 for more details.) Therefore, unless you have complete control of (and confidence in) everyone who uses your system, use the first of the two methods of adding your own command directory.

If you need to know which directory a command comes from, you need not look at directories in your PATH until you find it. The shell built-in command type prints the full pathname of the command you give it as argument, or just the command's name and its type if it's a built-in command itself (like cd), an alias, or a function (as we'll see in Chapter 4).

Command hashing

You may be thinking that having to go and find a command in a large list of possible places would take a long time, and you'd be right. To speed things up, bash uses what is known as a hash table.

Every time the shell goes and finds a command in the search path, it enters it in the hash table. If you then use the command again, bash first checks the hash table to see if the command is listed. If it is, it uses the path given in the table and executes the command; otherwise, it just has to go and look for the command in the search path.

You can see what is currently in the hash table with the command hash:

$ hash
hits    command
   2    /bin/cat
   1    /usr/bin/stat
   2    /usr/bin/less
   1    /usr/bin/man
   2    /usr/bin/apropos
   2    /bin/more
   1    /bin/ln
   3    /bin/ls
   1    /bin/ps
   2    /bin/vi

This not only shows the hashed commands, but how many times they have been executed (the hits) during the current login session.

Supplying a command name to hash forces the shell to look up the command in the search path and enter it in the hash table. You can also make bash "forget" what is in the hash table by using hash -r to remove everything in the table or hash -d name to remove the specified name.[16] Another option, -p, allows you to enter a command into the hash table, even if the command doesn't exist.[17]

Command hashing can be turned on and off with the hashall option to set. In general use, there shouldn't be any need to turn it off.

Don't be too concerned about the details of hashing. The command hashing and lookup is all done by bash without you knowing it's taking place.

Directory search path and variables

CDPATH is a variable whose value, like that of PATH, is a list of directories separated by colons. Its purpose is to augment the functionality of the cd built-in command.

By default, CDPATH isn't set (meaning that it is null), and when you type cd dirname, the shell will look in the current directory for a subdirectory that is called dirname.[18] If you set CDPATH, you give the shell a list of places to look for dirname; the list may or may not include the current directory.

Here is an example. Consider the alias for the long cd command from earlier in this chapter:

alias cdvoy='cd sipp/demo/animation/voyager'

Now suppose there were a few directories under this directory to which you need to go often; they are called src, bin, and doc. You define your CDPATH like this:

CDPATH=:~/sipp/demo/animation/voyager

In other words, you define your CDPATH to be the empty string (meaning the current directory) followed by ~/sipp/demo/animation/voyager.

With this setup, if you type cd doc, then the shell will look in the current directory for a (sub)directory called doc. Assuming that it doesn't find one, it looks in the directory ~/sipp/demo/animation/voyager. The shell finds the doc directory there, so you go directly there.

If you often find yourself going to a specific group of directories as you work on a particular project, you can use CDPATH to get there quickly. Note that this feature will only be useful if you update it whenever your work habits change.

bash provides another shorthand mechanism for referring to directories; if you set the shell option cdable_vars using shopt,[19] any argument supplied to the cd command that is not a directory is assumed to be a variable.

We might define the variable anim to be ~/sipp/demo/animation/voyager. If we set cdable_vars and then type:

cd anim

the current directory will become ~/sipp/demo/animation/voyager.

Miscellaneous variables

We have covered the shell variables that are important from the standpoint of customization. There are also several that serve as status indicators and for various other miscellaneous purposes. Their meanings are relatively straightforward; the more basic ones are summarized in Table 3-8.

Table 3-8. Status variables

Variable

Meaning

HOME

Name of your home (login) directory

SECONDS

Number of seconds since the shell was invoked

BASH

Pathname of this instance of the shell you are running

BASH_VERSION

The version number of the shell you are running

BASH_VERSINFO

An array of version information for the shell you are running

PWD

Current directory

OLDPWD

Previous directory before the last cd command

The shell sets the values of these variables, except HOME (which is set by the login process: login, rshd, etc.). The first five are set at login time, the last two whenever you change directories. Although you can also set their values, just like any other variables, it is difficult to imagine any situation where you would want to. In the case of SECONDS, if you set it to a new value it will start counting from the value you give it, but if you unset SECONDS it will lose its special meaning, even if you subsequently set it again.

[7] Versions prior to 2.0 have many more lowercase built-in variables. Most of these are now obsolete, the functionality having been moved to the shopt command.

[11] BSD UNIX users should note that the biff command on those systems does a better job of informing you about new mail; while bash only prints "you have new mail" messages right before it prints command prompts, biff can do so at any time.

[12] In versions of bash prior to 2.0, the default is "bash\$ ".

[13] \a, \e, \H, \T, \@, \v, and \V are not available in versions prior to 2.0. \D was introduced in bash 2.05b.

[14] Unless it's a built-in command (one of those shown in boldface, like cd and echo), in which case the code is simply part of the executable file for the entire shell.

[15] Unless the command name contains a slash (/), in which case the search does not take place.

[16] The -d option is not available in versions of bash prior to 2.05b.

[17] The -p option is not available in versions of bash prior to 2.0.

[18] This search is disabled when dirname starts with a slash. It is also disabled when dirname starts with ./ or ../.

[19] In versions of bash prior to 2.0, cdable_vars is a shell variable that you can set and unset.

Customization and Subprocesses

Some of the variables discussed above are used by commands you may run—as opposed to the shell itself—so that they can determine certain aspects of your environment. The majority, however, are not even known outside the shell.

This dichotomy begs an important question: which shell "things" are known outside the shell, and which are only internal? This question is at the heart of many misunderstandings about the shell and shell programming. Before we answer, we'll ask it again in a more precise way: which shell "things" are known to subprocesses? Remember that whenever you enter a command, you are telling the shell to run that command in a subprocess; furthermore, some complex programs may start their own subprocesses.

Now for the answer, which (like many UNIX concepts) is unfortunately not as simple as you might like. A few things are known to subprocesses, but the reverse is not true: subprocesses can never make these things known to the processes that created them.

Which things are known depends on whether the subprocess in question is a bash program (see Chapter 4) or an interactive shell. If the subprocess is a bash program, then it's possible to propagate nearly every type of thing we've seen in this chapter—options and variables—plus a few we'll see later.

Environment Variables

By default, only one kind of thing is known to all kinds of subprocesses: a special class of shell variables called environment variables. Some of the built-in variables we have seen are actually environment variables: HOME, MAIL, PATH, and PWD.

It should be clear why these and other variables need to be known by subprocesses. For example, text editors like vi and emacs need to know what kind of terminal you are using; the environment variable TERM is their way of determining this. As another example, most UNIX mail programs allow you to edit a message with your favorite text editor. How does mail know which editor to use? The value of EDITOR (or sometimes VISUAL).

Any variable can become an environment variable. First it must be defined as usual; then it must be exported with the command:[20]

export varnames

(varnames can be a list of variable names separated by blanks). You can combine variable assignment and the export into one statement:

export wonderland=alice

It is also possible to define variables to be in the environment of a particular subprocess (command) only, by preceding the command with the variable assignment, like this:

               varname=value command

You can put as many assignments before the command as you want.[21] For example, assume that you're using the emacs editor. You are having problems getting it to work with your terminal, so you're experimenting with different values of TERM. You can do this most easily by entering commands that look like:

TERM=trythisone
               emacs
               filename

emacs will have trythisone defined as its value of TERM, yet the environment variable in your shell will keep whatever value (if any) it had before. This syntax is surprisingly useful, but not very widely used; we won't see it much throughout the remainder of this book.

Nevertheless, environment variables are important. Most .bash_profile files include definitions of environment variables; the sample built-in .bash_profile earlier in this chapter contained six such definitions:

PATH=/sbin:/usr/sbin:/bin:/usr/bin:/usr/local/bin
SHELL=/bin/bash
MANPATH=/usr/man:/usr/X11/man
EDITOR=/usr/bin/vi
PS1='\h:\w\$ '
PS2='> '
export EDITOR

You can find out which variables are environment variables and what their values are by typing export without arguments or by using the -p option to the command.

Some environment variable names have been used by so many applications that they have become standard across many shell environments. These variables are not built into bash, although some shells, such as the Korn shell, have them as built-ins. Table 3-9 lists the ones you are most likely to come across.

Table 3-9. Standard variables

Variable

Meaning

COLUMNS

The number of columns your display has[22]

EDITOR

Pathname of your text editor

LINES

The number of lines your display has

SHELL

Pathname of the shell you are running

TERM

The type of terminal that you are using

[22] Note that bash will set COLUMNS and LINES during certain situations, such as when the window the shell is in changes in size.

You may well find that some of these already exist in your own environment, most likely set from the system /etc/profile file (see Chapter 10). You can define them yourself in your .bash_profile and export them, as we did earlier.

Terminal types

The variable TERM is vitally important for any program that uses your entire screen or window, like a text editor. Such programs include all screen editors (such as vi and emacs), more, and countless third-party applications.

Because users are spending more and more time within programs, and less and less using the shell itself, it is extremely important that your TERM is set correctly. It's really your system administrator's job to help you do this (or to do it for you), but in case you need to do it yourself, here are a few guidelines.

The value of TERM must be a short character string with lowercase letters that appears as a filename in the terminfo database.[23] This database is a two-tiered directory of files under the root directory /usr/lib/terminfo. This directory contains subdirectories with single-character names; these in turn contain files of terminal information for all terminals whose names begin with that character. Each file describes how to tell the terminal in question to do certain common things like position the cursor on the screen, go into reverse video, scroll, insert text, and so on. The descriptions are in binary form (i.e., not readable by humans).

Names of terminal description files are the same as that of the terminal being described; sometimes an abbreviation is used. For example, the DEC VT100 has a description in the file /usr/lib/terminfo/v/vt100. An xterm terminal window under the X Window System has a description in /usr/lib/terminfo/x/xterm.

Sometimes your UNIX software will set up TERM incorrectly; this usually happens for X terminals and PC-based UNIX systems. Therefore, you should check the value of TERM by typing echo $TERM before going any further. If you find that your UNIX system isn't setting the right value for you (especially likely if your terminal is of a different make from that of your computer), you need to find the appropriate value of TERM yourself.

The best way to find the TERM value—if you can't find a local guru to do it for you—is to guess the terminfo name and search for a file of that name under /usr/lib/terminfo by using ls. For example, if your terminal is a Hewlett-Packard 70092, you could try:

$ cd /usr/lib/terminfo
$ ls 7/7*

If you are successful, you will see something like this:

70092   70092A  70092a

In this case, the three names are likely to be synonyms for (links to) the same terminal description, so you could use any one as a value of TERM. In other words, you could put any of these three lines in your .bash_profile:

TERM=70092
TERM=70092A
TERM=70092a

If you aren't successful, ls will print an error message, and you will have to make another guess and try again. If you find that terminfo contains nothing that resembles your terminal, all is not lost. Consult your terminal's manual to see if the terminal can emulate a more popular model; nowadays the odds for this are excellent.

Conversely, terminfo may have several entries that relate to your terminal, for submodels, special modes, etc. If you have a choice of which entry to use as your value of TERM, we suggest you test each one out with your text editor or any other screen-oriented programs you use and see which one works best.

The process is much simpler if you are using a windowing system, in which your "terminals" are logical portions of the screen rather than physical devices. In this case, operating system-dependent software was written to control your terminal window(s), so the odds are very good that if it knows how to handle window resizing and complex cursor motion, then it is capable of dealing with simple things like TERM. The X Window System, for example, automatically sets xterm as its value for TERM in an xterm terminal window.

Other common variables

Some programs, such as mail, need to know what type of editor you would like to use. In most cases they will default to a common editor like ed unless you set the EDITOR variable to the path of your favorite editor and export it in your .bash_profile.

Some programs run shells as subprocesses within themselves (e.g., many mail programs and the emacs editor's shell mode); by convention they use the SHELL variable to determine which shell to use. SHELL is usually set by the process that invokes the login shell; usually login or something like rshd if you are logged in remotely. bash sets it only if it hasn't already been set.

You may have noticed that the value of SHELL looks the same as BASH. These two variables serve slightly different purposes. BASH is set to the pathname of the current shell, whether it is an interactive shell or not. SHELL, on the other hand, is set to the name of your login shell, which may be a completely different shell.

COLUMNS and LINES are used by screen-oriented editors like vi. In most cases a default is used if they are undefined, but if you are having display problems with screen-oriented applications then you should check these variables to see if they are correct.

The Environment File

Although environment variables will always be known to subprocesses, the shell must be explicitly told which other variables, options, aliases, and so on, are to be communicated to subprocesses. The way to do this is to put all such definitions into the environment file. bash's default environment file is the .bashrc file that we touched on briefly at the beginning of this chapter.

Remember, if you take your definitions out of .bash_profile and put them in .bashrc, you will have to have the line source .bashrc at the end of your .bash_profile so that the definitions become available to the login shell.

The idea of the environment file comes from the C shell's .cshrc file. This is reflected in the choice of the name .bashrc. The rc suffix for initialization files is practically universal throughout the UNIX world.[24]

As a general rule, you should put as few definitions as possible in .bash_profile and as many as possible in your environment file. Because definitions add to rather than take away from an environment, there is little chance that they will cause something in a subprocess not to work properly. (An exception might be name clashes if you go overboard with aliases.)

The only things that really need to be in .bash_profile are environment variables and their exports and commands that aren't definitions but actually run or produce output when you log in. Option and alias definitions should go into the environment file. In fact, there are many bash users who have tiny .bash_profile files, e.g.:

stty stop ^S intr ^C erase ^?
date
source .bashrc

Although this is a small .bash_profile, this user's environment file could be huge.

[20] Unless automatic exporting has been turned on by set -a or set -o allexport, in which case all variables that are assigned to will be exported.

[21] There is an obscure option, set -k, that lets you put this type of environment variable definition anywhere on the command line, not just at the beginning.

[23] Note that most modern UNIX systems now use a database rather than a flat file for the terminal descriptions.

[24] According to the folklore, it stands for "run commands" and has its origins in old DEC operating systems.

Customization Hints

You should feel free to try any of the techniques presented in this chapter. The best strategy is to test something out by typing it into the shell during your login session; then if you decide you want to make it a permanent part of your environment, add it to your .bash_profile.

A nice, painless way to add to your .bash_profile without going into a text editor makes use of the echo command and one of bash's editing modes. If you type a customization command in and later decide to add it to your .bash_profile, you can recall it via CTRL-P or CTRL-R (in emacs-mode) or j, -, or ? (vi-mode). Let's say the line is:

PS1="\u \!--> "

After you recall it, edit the line so that it is preceded by an echo command, surrounded by single quotes, and followed by an I/O redirector that (as you will see in Chapter 7) appends the output to ~/.bash_profile:

$ echo 'PS1="\u \!--> " ' >> ~/.bash_profile

Remember that the single quotes are important because they prevent the shell from trying to interpret things like dollar signs, double quotes, and exclamation points. Also make sure that you use a double right-caret (>>). A single one will overwrite the file rather than appending to it.

Chapter 4. Basic Shell Programming

If you have become familiar with the customization techniques we presented in the previous chapter, you have probably run into various modifications to your environment that you want to make but can't—yet. Shell programming makes these possible.

bash has some of the most advanced programming capabilities of any command interpreter of its type. Although its syntax is nowhere near as elegant or consistent as that of most conventional programming languages, its power and flexibility are comparable. In fact, bash can be used as a complete environment for writing software prototypes.

Some aspects of bash programming are really extensions of the customization techniques we have already seen, while others resemble traditional programming language features. We have structured this chapter so that if you aren't a programmer, you can read this chapter and do quite a bit more than you could with the information in the previous chapter. Experience with a conventional programming language like Pascal or C is helpful (though not strictly necessary) for subsequent chapters. Throughout the rest of the book, we will encounter occasional programming problems, called tasks, whose solutions make use of the concepts we cover.

Shell Scripts and Functions

A script (a file that contains shell commands) is a shell program. Your .bash_profile and environment files, discussed in the previous chapter, are shell scripts.

You can create a script using the text editor of your choice. Once you have created one, there are two ways to run it. One, which we have already covered, is to type source scriptname. This causes the commands in the script to be read and run as if you typed them in.

The second way to run a script is simply to type its name and hit RETURN, just as if you were invoking a built-in command. This, of course, is the more convenient way. This method makes the script look just like any other UNIX command, and in fact several "regular" commands are implemented as shell scripts (i.e., not as programs originally written in C or some other language), including spell, man on some systems, and various commands for system administrators. The resulting lack of distinction between "user command files" and "built-in commands" is one factor in UNIX's extensibility and, hence, its favored status among programmers.

You can run a script by typing its name only if the directory where the script is located is in your command search path, or . (the current directory) is part of your command search path, i.e., the script's directory path (as discussed in Chapter 3). If these aren't in your path, you must type ./scriptname, which is really the same thing as typing the script's absolute pathname (see Chapter 1).

Before you can invoke the shell script by name, you must also give it "execute" permission. If you are familiar with the UNIX filesystem, you know that files have three types of permissions (read, write, and execute) and that those permissions apply to three categories of user (the file's owner, a group of users, and everyone else). Normally, when you create a file with a text editor, the file is set up with read and write permission for you and read-only permission for everyone else.

Therefore you must give your script execute permission explicitly, by using the chmod command. The simplest way to do this is to type:

            $ chmod +x
            scriptname

Your text editor will preserve this permission if you make subsequent changes to your script. If you don't add execute permission to the script and you try to invoke it, the shell will print the message:

            scriptname: Permission denied

But there is a more important difference between the two ways of running shell scripts. While using source causes the commands in the script to be run as if they were part of your login session, the "just the name" method causes the shell to do a series of things. First, it runs another copy of the shell as a subprocess; this is called a subshell. The subshell then takes commands from the script, runs them, and terminates, handing control back to the parent shell.

Figure 4-1 shows how the shell executes scripts. Assume you have a simple shell script called alice that contains the commands hatter and gryphon. In .a, typing source alice causes the two commands to run in the same shell, just as if you had typed them in by hand. .b shows what happens when you type just alice: the commands run in the subshell while the parent shell waits for the subshell to finish.

You may find it interesting to compare this with the situation in .c, which shows what happens when you type alice &. As you will recall from Chapter 1, the & makes the command run in the background, which is really just another term for "subprocess." It turns out that the only significant difference between .c and .b is that you have control of your terminal or workstation while the command runs—you need not wait until it finishes before you can enter further commands.

Figure 4-1. Ways to run a shell script

There are many ramifications to using subshells. An important one is that the exported environment variables that we saw in the last chapter (e.g., TERM, EDITOR, PWD) are known in subshells, whereas other shell variables (such as any that you define in your .bash_profile without an export statement) are not.

Other issues involving subshells are too complex to go into now; see Chapter 7 and Chapter 8 for more details about subshell I/O and process characteristics, respectively. For now, just bear in mind that a script normally runs in a subshell.

Functions

bash's function feature is an expanded version of a similar facility in the System V Bourne shell and a few other shells. A function is sort of a script-within-a-script; you use it to define some shell code by name and store it in the shell's memory, to be invoked and run later.

Functions improve the shell's programmability significantly, for two main reasons. First, when you invoke a function, it is already in the shell's memory; therefore a function runs faster. Modern computers have plenty of memory, so there is no need to worry about the amount of space a typical function takes up. For this reason, most people define as many commonly used functions as possible rather than keep lots of scripts around.

The other advantage of functions is that they are ideal for organizing long shell scripts into modular "chunks" of code that are easier to develop and maintain. If you aren't a programmer, ask one what life would be like without functions ( also called procedures or subroutines in other languages) and you'll probably get an earful.

To define a function, you can use either one of two forms:

function functname
               {
               shell commands
               }

or:

               functname
               ( )
{
    shell commands
               }

There is no functional difference between the two. We will use both forms in this book. You can also delete a function definition with the command unset -f functname.

When you define a function, you tell the shell to store its name and definition (i.e., the shell commands it contains) in memory. If you want to run the function later, just type in its name followed by any arguments, as if it were a shell script.

You can find out what functions are defined in your login session by typing declare -f. The shell will print not just the names but the definitions of all functions, in alphabetical order by function name. Since this may result in long output, you might want to pipe the output through more or redirect it to a file for examination with a text editor. If you just want to see the names of the functions, you can use declare -F.[1] We will look at declare in more detail in Chapter 6.

Apart from the advantages, there are two important differences between functions and scripts. First, functions do not run in separate processes, as scripts do when you invoke them by name; the "semantics" of running a function are more like those of your .bash_profile when you log in or any script when invoked with the source command. Second, if a function has the same name as a script or executable program, the function takes precedence.

This is a good time to show the order of precedence for the various sources of commands when you type a command to the shell:

Aliases

Keywords such as function and several others, like if and for, which we will see in Chapter 5

Functions

Built-ins like cd and type

Scripts and executable programs, for which the shell searches in the directories listed in the PATH environment variable

Thus, an alias takes precedence over a function or a script with the same name. You can, however, change the order of precedence by using the built-ins command, builtin, and enable. This allows you to define functions, aliases, and script files with the same names, and select which one you want to execute. We'll examine this process in more detail in the section on command-line processing in Chapter 7.

If you need to know the exact source of a command, there are options to the type built-in command that we saw in Chapter 3. type by itself will print how bash would interpret the command, based on the search locations listed above. If you supply more than one argument to type, it will print the information for each command in turn. If you had a shell script, a function, and an alias all called dodo, type would tell you that dodo, as an alias, would be used if you typed dodo.

type has several options that allow you to find specific details of a command. If you want to find out all of the definitions for dodo you can use type -a. This will produce output similar to the following:

$ type -all dodo
dodo is aliased to `echo "Everybody has won, and all must have prizes"'
dodo is a function
dodo ( )
{
    echo "Everybody has won, and all must have prizes"
}
dodo is ./dodo

It is also possible to restrict the search to commands that are executable files or shell scripts by using the -p option. If the command as typed to bash executes a file or shell script, the path name of the file is returned; otherwise, nothing is printed.

The -P option forces type to look for executable files or shell scripts even if the result of -t would not return file.

A further option, -f, suppresses shell function lookup, i.e., only keywords, files and aliases will be returned.[2]

The default output from type is verbose; it will give you the full definition for an alias or function. By using the -t option, you can restrict this to a single word descriptor: alias, keyword, function, builtin, or file. For example:

$ type -t bash
file
$ type -t if
keyword

The -t option can also be used with all other options.

We will refer mainly to scripts throughout the remainder of this book, but unless we note otherwise, you should assume that whatever we say applies equally to functions.

[1] The -F option is not available in versions of bash prior to 2.0.

[2] The options -f and -P are not available in versions of bash prior to 2.05b.

Shell Variables

bash derives much of its programming functionality from shell variables. We've already seen the basics of variables. To recap briefly: they are named places to store data, usually in the form of character strings, and their values can be obtained by preceding their names with dollar signs ($). Certain variables, called environment variables, are conventionally named in all capital letters, and their values are made known (with the export statement) to subprocesses.

If you are a programmer, you already know that just about every major programming language uses variables in some way; in fact, an important way of characterizing differences between languages is comparing their facilities for variables.

The chief difference between bash's variable schema and those of conventional languages is that bash's places heavy emphasis on character strings. (Thus it has more in common with a special-purpose language like SNOBOL than a general-purpose one like Pascal.) This is also true of the Bourne shell and the C shell, but bash goes beyond them by having additional mechanisms for handling integers explicitly.

Positional Parameters

As we have already seen, you can define values for variables with statements of the form varname=value, e.g.:

$ hatter=mad
$ echo "$hatter"
mad

The shell predefines some environment variables when you log in. There are other built-in variables that are vital to shell programming. We will look at a few of them now and save the others for later.

The most important special, built-in variables are called positional parameters. These hold the command-line arguments to scripts when they are invoked. Positional parameters have the names 1, 2, 3, etc., meaning that their values are denoted by $1, $2, $3, etc. There is also a positional parameter 0, whose value is the name of the script (i.e., the command typed in to invoke it).

Two special variables contain all of the positional parameters (except positional parameter 0): * and @. The difference between them is subtle but important, and it's apparent only when they are within double quotes.

"$*" is a single string that consists of all of the positional parameters, separated by the first character in the value of the environment variable IFS (internal field separator), which is a space, TAB, and NEWLINE by default. On the other hand, "$@" is equal to "$1" "$2"... "$ N", where N is the number of positional parameters. That is, it's equal to N separate double-quoted strings, which are separated by spaces. If there are no positional parameters, "$@" expands to nothing. We'll explore the ramifications of this difference in a little while.

The variable # holds the number of positional parameters (as a character string). All of these variables are "read-only," meaning that you can't assign new values to them within scripts.

For example, assume that you have the following simple shell script:

echo "alice: $@"
echo "$0: $1 $2 $3 $4"
echo "$# arguments"

Assume further that the script is called alice. Then if you type alice in wonderland, you will see the following output:

alice: in wonderland
alice: in wonderland
2 arguments

In this case, $3 and $4 are unset, which means that the shell will substitute the empty (or null) string for them.[3]

Positional parameters in functions

Shell functions use positional parameters and special variables like * and # in exactly the same way as shell scripts do. If you wanted to define alice as a function, you could put the following in your .bash_profile or environment file:

function alice
{
    echo "alice: $*"
    echo "$0: $1 $2 $3 $4"
    echo "$# arguments"
}

You will get the same result if you type alice in wonderland.

Typically, several shell functions are defined within a single shell script. Therefore each function will need to handle its own arguments, which in turn means that each function needs to keep track of positional parameters separately. Sure enough, each function has its own copies of these variables (even though functions don't run in their own subshells, as scripts do); we say that such variables are local to the function.

However, other variables defined within functions are not local (they are global), meaning that their values are known throughout the entire shell script. For example, assume that you have a shell script called ascript that contains this:

function afunc
{
  echo in function: $0 $1 $2
  var1="in function"
  echo var1: $var1
}

var1="outside function"
echo var1: $var1
echo $0: $1 $2
afunc funcarg1 funcarg2
echo var1: $var1
echo $0: $1 $2

If you invoke this script by typing ascript arg1 arg2, you will see this output:

var1: outside function
ascript: arg1 arg2
in function: ascript funcarg1 funcarg2
var1: in function
var1: in function
ascript: arg1 arg2

In other words, the function afunc changes the value of the variable var1 from "outside function" to "in function," and that change is known outside the function, while $1 and $2 have different values in the function and the main script. Notice that $0 doesn't change because the function executes in the environment of the shell script and $0 takes the name of the script. Figure 4-2 shows the scope of each variable graphically.

Figure 4-2. Functions have their own positional parameters

Local Variables in Functions

A local statement inside a function definition makes the variables involved all become local to that function. The ability to define variables that are local to "subprogram" units (procedures, functions, subroutines, etc.) is necessary for writing large programs, because it helps keep subprograms independent of the main program and of each other.

Here is the function from our last example with the variable var1 made local:

function afunc
{
  local var1
  echo in function: $0 $1 $2

  var1="in function"
  echo var1: $var1
}

Now the result of running ascript arg1 arg2 is:

var1: outside function
ascript: arg1 arg2
in function: ascript funcarg1 funcarg2
var1: in function
var1: outside function
ascript: arg1 arg2

Figure 4-3 shows the scope of each variable in our new script. Note that afunc now has its own, local copy of var1, although the original var1 would still be used by any other functions that ascript invokes.

Figure 4-3. Functions can have local variables

Quoting with $@ and $*

Now that we have this background, let's take a closer look at "$@" and "$*". These variables are two of the shell's greatest idiosyncracies, so we'll discuss some of the most common sources of confusion.

Why are the elements of "$*" separated by the first character of IFS instead of just spaces? To give you output flexibility. As a simple example, let's say you want to print a list of positional parameters separated by commas. This script would do it:

IFS=,
echo "$*"

Changing IFS in a script is risky, but it's probably OK as long as nothing else in the script depends on it. If this script were called arglist, then the command arglist alice dormouse hatter would produce the output alice,dormouse,hatter. Chapter 5 and Chapter 10 contain other examples of changing IFS.

Why does "$@" act like N separate double-quoted strings? To allow you to use them again as separate values. For example, say you want to call a function within your script with the same list of positional parameters, like this:

function countargs
{
    echo "$# args."
}

Assume your script is called with the same arguments as arglist above. Then if it contains the command countargs "$*", the function will print 1 args. But if the command is countargs "$@", the function will print 3 args.

More on Variable Syntax

Before we show the many things you can do with shell variables, we have to point out a simplification we have been making: the syntax of $varname for taking the value of a variable is actually the simple form of the more general syntax, ${varname}.

Why two syntaxes? For one thing, the more general syntax is necessary if your code refers to more than nine positional parameters: you must use ${10} for the tenth instead of $10. Aside from that, consider the following case where you would like to place an underscore after your user ID:

echo $UID_

The shell will try to use UID_ as the name of the variable. Unless, by chance, $UID_ already exists, this won't print anything (the value being null or the empty string, ""). To obtain the desired result, you need to enclose the shell variable in curly brackets:

echo ${UID}_

It is safe to omit the curly brackets ({}) if the variable name is followed by a character that isn't a letter, digit, or underscore.

[3] Unless the option nounset is turned on, in which case the shell will return an error message.

String Operators

The curly-bracket syntax allows for the shell's string operators. String operators allow you to manipulate values of variables in various useful ways without having to write full-blown programs or resort to external UNIX utilities. You can do a lot with string-handling operators even if you haven't yet mastered the programming features we'll see in later chapters.

In particular, string operators let you do the following:

Ensure that variables exist (i.e., are defined and have non-null values)

Set default values for variables

Catch errors that result from variables not being set

Remove portions of variables' values that match patterns

Syntax of String Operators

The basic idea behind the syntax of string operators is that special characters that denote operations are inserted between the variable's name and the right curly bracket. Any argument that the operator may need is inserted to the operator's right.

The first group of string-handling operators tests for the existence of variables and allows substitutions of default values under certain conditions. These are listed in Table 4-1.[4]

Table 4-1. Substitution operators

Operator

Substitution

${ varname :- word }

If varname exists and isn't null, return its value; otherwise return word.

Purpose: Returning a default value if the variable is undefined.

Example: ${count:-0} evaluates to 0 if count is undefined.

${ varname := word}

If varname exists and isn't null, return its value; otherwise set it to word and then return its value. Positional and special parameters cannot be assigned this way.

Purpose: Setting a variable to a default value if it is undefined.

Example: ${count:=0} sets count to 0 if it is undefined.

${ varname :? message }

If varname exists and isn't null, return its value; otherwise print varname: followed by message, and abort the current command or script (non-interactive shells only). Omitting message produces the default message parameter null or not set.

Purpose: Catching errors that result from variables being undefined.

Example: {count:?"undefined!"} prints "count: undefined!" and exits if count is undefined.

${ varname:+word }

If varname exists and isn't null, return word; otherwise return null.

Purpose: Testing for the existence of a variable.

Example: ${count:+1} returns 1 (which could mean "true") if count is defined.

${ varname:offset:length }

Performs substring expansion.[5] It returns the substring of $varname starting at offset and up to length characters. The first character in $varname is position 0. If length is omitted, the substring starts at offset and continues to the end of $varname. If offset is less than 0 then the position is taken from the end of $varname. If varname is @, the length is the number of positional parameters starting at parameter offset.

Purpose: Returning parts of a string (substrings or slices).

Example: If count is set to frogfootman, ${count:4} returns footman. ${count:4:4} returns foot.

[5] The substring expansion operator is not available in versions of bash prior to 2.0.

The first of these operators is ideal for setting defaults for command-line arguments in case the user omits them. We'll use this technique in our first programming task.

Task 4-1

You have a large album collection, and you want to write some software to keep track of it. Assume that you have a file of data on how many albums you have by each artist. Lines in the file look like this:

5        Depeche Mode
2        Split Enz
3        Simple Minds
1        Vivaldi, Antonio

Write a program that prints the N highest lines, i.e., the N artists by whom you have the most albums. The default for N should be 10. The program should take one argument for the name of the input file and an optional second argument for how many lines to print.

By far the best approach to this type of script is to use built-in UNIX utilities, combining them with I/O redirectors and pipes. This is the classic "building-block" philosophy of UNIX that is another reason for its great popularity with programmers. The building-block technique lets us write a first version of the script that is only one line long:

sort -nr $1 | head -${2:-10}

Here is how this works: the sort program sorts the data in the file whose name is given as the first argument ($1). The -n option tells sort to interpret the first word on each line as a number (instead of as a character string); the -r tells it to reverse the comparisons, so as to sort in descending order.

The output of sort is piped into the head utility, which, when given the argument - N, prints the first N lines of its input on the standard output. The expression -${2:-10} evaluates to a dash (-) followed by the second argument if it is given, or to -10 if it's not; notice that the variable in this expression is 2, which is the second positional parameter.

Assume the script we want to write is called highest. Then if the user types highest myfile, the line that actually runs is:

sort -nr myfile | head -10

Or if the user types highest myfile 22, the line that runs is:

sort -nr myfile | head -22

Make sure you understand how the :- string operator provides a default value.

This is a perfectly good, runnable script—but it has a few problems. First, its one line is a bit cryptic. While this isn't much of a problem for such a tiny script, it's not wise to write long, elaborate scripts in this manner. A few minor changes will make the code more readable.

First, we can add comments to the code; anything between # and the end of a line is a comment. At a minimum, the script should start with a few comment lines that indicate what the script does and what arguments it accepts. Second, we can improve the variable names by assigning the values of the positional parameters to regular variables with mnemonic names. Finally, we can add blank lines to space things out; blank lines, like comments, are ignored. Here is a more readable version:

#
#        highest filename [howmany]
#
#        Print howmany highest-numbered lines in file filename.
#        The input file is assumed to have lines that start with
#        numbers.  Default for howmany is 10.
#

filename=$1
howmany=${2:-10}

sort -nr $filename | head -$howmany

The square brackets around howmany in the comments adhere to the convention in UNIX documentation that square brackets denote optional arguments.

The changes we just made improve the code's readability but not how it runs. What if the user were to invoke the script without any arguments? Remember that positional parameters default to null if they aren't defined. If there are no arguments, then $1 and $2 are both null. The variable howmany ($2) is set up to default to 10, but there is no default for filename ($1). The result would be that this command runs:

sort -nr | head -10

As it happens, if sort is called without a filename argument, it expects input to come from standard input, e.g., a pipe (|) or a user's terminal. Since it doesn't have the pipe, it will expect the terminal. This means that the script will appear to hang! Although you could always hit CTRL-D or CTRL-C to get out of the script, a naive user might not know this.

Therefore we need to make sure that the user supplies at least one argument. There are a few ways of doing this; one of them involves another string operator. We'll replace the line:

filename=$1

with:

filename=${1:?"filename missing."}

This will cause two things to happen if a user invokes the script without any arguments: first the shell will print the somewhat unfortunate message:

highest: 1: filename missing.

to the standard error output. Second, the script will exit without running the remaining code. With a somewhat "kludgy" modification, we can get a slightly better error message.

Consider this code:

filename=$1
filename=${filename:?"missing."}

This results in the message:

highest: filename: missing.

(Make sure you understand why.) Of course, there are ways of printing whatever message is desired; we'll find out how in Chapter 5.

Before we move on, we'll look more closely at the three remaining operators in Table 4-1 and see how we can incorporate them into our task solution. The := operator does roughly the same thing as :-, except that it has the "side effect" of setting the value of the variable to the given word if the variable doesn't exist.

Therefore we would like to use := in our script in place of :-, but we can't; we'd be trying to set the value of a positional parameter, which is not allowed. But if we replaced:

howmany=${2:-10}

with just:

howmany=$2

and moved the substitution down to the actual command line (as we did at the start), then we could use the := operator:

sort -nr $filename | head -${howmany:=10}

The operator :+ substitutes a value if the given variable exists and isn't null. Here is how we can use it in our example: let's say we want to give the user the option of adding a header line to the script's output. If she types the option -h, then the output will be preceded by the line:

ALBUMS  ARTIST

Assume further that this option ends up in the variable header, i.e., $header is -h if the option is set or null if not. (Later we will see how to do this without disturbing the other positional parameters.)

The following expression yields null if the variable header is null, or ALBUMSARTIST\n if it is non-null:

${header:+"ALBUMSARTIST\n"}

This means that we can put the line:

echo -e -n ${header:+"ALBUMSARTIST\n"}

right before the command line that does the actual work. The -n option to echo causes it not to print a LINEFEED after printing its arguments. Therefore this echo statement will print nothing—not even a blank line—if header is null; otherwise it will print the header line and a LINEFEED (\n). The -e option makes echo interpret the \n as a LINEFEED rather than literally.

The final operator, substring expansion, returns sections of a string. We can use it to "pick out" parts of a string that are of interest. Assume that our script is able to assign lines of the sorted list, one at a time, to the variable album_line. If we want to print out just the album name and ignore the number of albums, we can use substring expansion:

echo ${album_line:8}

This prints everything from character position 8, which is the start of each album name, onwards.

If we just want to print the numbers and not the album names, we can do so by supplying the length of the substring:

echo ${album_line:0:7}

Although this example may seem rather useless, it should give you a feel for how to use substrings. When combined with some of the programming features discussed later in the book, substrings can be extremely useful.

Patterns and Pattern Matching

We'll continue refining our solution to Task 4-1 later in this chapter. The next type of string operator is used to match portions of a variable's string value against patterns. Patterns, as we saw in Chapter 1, are strings that can contain wildcard characters (*, ?, and [] for character sets and ranges).

Table 4-2 lists bash's pattern-matching operators.

Table 4-2. Pattern-matching operators

Operator

Meaning

${variable #pattern}

If the pattern matches the beginning of the variable's value, delete the shortest part that matches and return the rest.

${variable ##pattern}

If the pattern matches the beginning of the variable's value, delete the longest part that matches and return the rest.

${variable %pattern}

If the pattern matches the end of the variable's value, delete the shortest part that matches and return the rest.

${variable %%pattern}

If the pattern matches the end of the variable's value, delete the longest part that matches and return the rest.

${variable/ pattern/ string}${variable// pattern/ string}

The longest match to pattern in variable is replaced by string. In the first form, only the first match is replaced. In the second form, all matches are replaced. If the pattern begins with a #, it must match at the start of the variable. If it begins with a %, it must match with the end of the variable. If string is null, the matches are deleted. If variable is @ or *, the operation is applied to each positional parameter in turn and the expansion is the resultant list.[6]

[6] The pattern-matching and replacement operator is not available in versions of bash prior to 2.0.

These can be hard to remember; here's a handy mnemonic device: # matches the front because number signs precede numbers; % matches the rear because percent signs follow numbers.

The classic use for pattern-matching operators is in stripping off components of pathnames, such as directory prefixes and filename suffixes. With that in mind, here is an example that shows how all of the operators work. Assume that the variable path has the value /home/cam/book/long.file.name; then:

Expression                   Result
${path##/*/}                      long.file.name
${path#/*/}              cam/book/long.file.name
$path              /home/cam/book/long.file.name
${path%.*}         /home/cam/book/long.file
${path%%.*}        /home/cam/book/long

The two patterns used here are /*/, which matches anything between two slashes, and .*, which matches a dot followed by anything.

The longest and shortest pattern-matching operators produce the same output unless they are used with the * wildcard operator. As an example, if filename had the value alicece, then both ${filename%ce} and ${filename%%ce} would produce the result alice. This is because ce is an exact match; for a match to occur, the string ce must appear on the end $filename. Both the short and long matches will then match the last grouping of ce and delete it. If, however, we had used the * wildcard, then ${filename%ce*} would produce alice because it matches the shortest occurrence of ce followed by anything else. ${filename%%ce*} would return ali because it matches the longest occurrence of ce followed by anything else; in this case the first and second ce.

The next task will incorporate one of these pattern-matching operators.

Task 4-2

You are writing a graphics file conversion utility for use in creating a web page. You want to be able to take a PCX file and convert it to a JPEG file for use on the web page.[7]

Graphics file conversion utilities are quite common because of the plethora of different graphics formats and file types. They allow you to specify an input file, usually from a range of different formats, and convert it to an output file of a different format. In this case, we want to take a PCX file, which can't be displayed with a web browser, and convert it to a JPEG which can be displayed by nearly all browsers. Part of this process is taking the filename of the PCX file, which ends in .pcx, and changing it to one ending in .jpg for the output file. In essence, you want to take the original filename and strip off the .pcx, then append .jpg. A single shell statement will do this:

outfile=${filename%.pcx}.jpg

The shell takes the filename and looks for .pcx on the end of the string. If it is found, .pcx is stripped off and the rest of the string is returned. For example, if filename had the value alice.pcx, the expression ${filename%.pcx} would return alice. The .jpg is appended to form the desired alice.jpg, which is then stored in the variable outfile.

If filename had an inappropriate value (without the .pcx) such as alice.xpm, the above expression would evaluate to alice.xpm.jpg: since there was no match, nothing is deleted from the value of filename, and .jpg is appended anyway. Note, however, that if filename contained more than one dot (e.g., if it were alice.1.pcx—the expression would still produce the desired value alice.1.jpg).

The next task uses the longest pattern-matching operator.

Task 4-3

You are implementing a filter that prepares a text file for printer output. You want to put the file's name—without any directory prefix—on the "banner" page. Assume that, in your script, you have the pathname of the file to be printed stored in the variable pathname.

Clearly, the objective is to remove the directory prefix from the pathname. The following line will do it:

bannername=${pathname##*/}

This solution is similar to the first line in the examples shown before. If pathname were just a filename, the pattern */ (anything followed by a slash) would not match and the value of the expression would be pathname untouched. If pathname were something like book/wonderland, the prefix book/ would match the pattern and be deleted, leaving just wonderland as the expression's value. The same thing would happen if pathname were something like /home/cam/ book/wonderland: since the ## deletes the longest match, it deletes the entire /home/cam/book/.

If we used #*/ instead of ##*/, the expression would have the incorrect value home/cam/book/wonderland, because the shortest instance of "anything followed by a slash" at the beginning of the string is just a slash (/).

The construct ${ variable ##*/} is actually equivalent to the UNIX utility basename. basename takes a pathname as argument and returns the filename only; it is meant to be used with the shell's command substitution mechanism (see the following explanation). basename is less efficient than ${ variable ##*/} because it runs in its own separate process rather than within the shell. Another utility, dirname, does essentially the opposite of basename: it returns the directory prefix only. It is equivalent to the bash expression ${ variable %/*} and is less efficient for the same reason.

The last operator in the table matches patterns and performs substitutions. Task 4-4 is a simple task where it comes in useful.

Task 4-4

The directories in PATH can be hard to distinguish when printed out as one line with colon delimiters. You want a simple way to display them, one to a line.

As directory names are separated by colons, the easiest way would be to replace each colon with a LINEFEED:

$ echo -e ${PATH//:/'\n'}
/home/cam/bin
/usr/local/bin
/bin
/usr/bin
/usr/X11R6/bin

Each occurrence of the colon is replaced by \n. As we saw earlier, the -e option allows echo to interpret \n as a LINEFEED. In this case we used the second of the two substitution forms. If we'd used the first form, only the first colon would have been replaced with a \n.

Length Operator

There is one remaining operator on variables. It is ${# varname }, which returns the length of the value of the variable as a character string. (In Chapter 6, we will see how to treat this and similar values as actual numbers so they can be used in arithmetic expressions.) For example, if filename has the value alice.c, then ${#filename} would have the value 7.

Extended Pattern Matching

Bash provides a further set of pattern matching operators if the shopt option extglob is switched on. Each operator takes one or more patterns, normally strings, separated by the vertical bar ( | ). The extended pattern matching operators are given in Table 4-3.[8]

Table 4-3. Pattern-matching operators

Operator

Meaning

*(patternlist)

Matches zero or more occurrences of the given patterns.

+(patternlist)

Matches one or more occurrences of the given patterns.

?(patternlist)

Matches zero or one occurrences of the given patterns.

@(patternlist)

Matches exactly one of the given patterns.

!(patternlist)

Matches anything except one of the given patterns.

Some examples of these include:

*(alice|hatter|hare) would match zero or more occurrences of alice, hatter, and hare. So it would match the null string, alice, alicehatter, etc.

+(alice|hatter|hare) would do the same except not match the null string.

?(alice|hatter|hare) would only match the null string, alice, hatter, or hare.

@(alice|hatter|hare) would only match alice, hatter, or hare.

!(alice|hatter|hare) matches everything except alice, hatter, and hare.

The values provided can contain shell wildcards too. So, for example, +([0-9]) matches a number of one or more digits. The patterns can also be nested, so you could remove all files except those beginning with vt followed by a number by doing rm !(vt+([0-9])).

[4] The colon (:) in all but the last of these operators is actually optional. If the colon is omitted, then change "exists and isn't null" to "exists" in each definition, i.e., the operator tests for existence only.

[7] PCX is a popular graphics file format under Microsoft Windows. JPEG (Joint Photographic Expert Group) is a common graphics format on the Internet and is used to a great extent on web pages.

[8] Be aware that these are not available in early releases of bash 2.0.

Command Substitution

From the discussion so far, we've seen two ways of getting values into variables: by assignment statements and by the user supplying them as command-line arguments (positional parameters). There is another way: command substitution, which allows you to use the standard output of a command as if it were the value of a variable. You will soon see how powerful this feature is.

The syntax of command substitution is:[9]

$(UNIX command)

The command inside the parentheses is run, and anything the command writes to standard output is returned as the value of the expression. These constructs can be nested, i.e., the UNIX command can contain command substitutions.

Here are some simple examples:

The value of $(pwd) is the current directory (same as the environment variable $PWD).

The value of $(ls $HOME) is the names of all files in your home directory.

The value of $(ls $(pwd)) is the names of all files in the current directory.

The value of $(< alice) is the contents of the file alice with any trailing newlines removed.[10]

To find out detailed information about a command if you don't know where its file resides, type ls -l $(type -path -all command-name). The -all option forces type to do a pathname look-up and -path causes it to ignore keywords, built-ins, etc.

If you want to edit (with vi) every chapter of your book on bash that has the phrase "command substitution," assuming that your chapter files all begin with ch, you could type:

                  vi $(grep -l 'command substitution' ch*)

The -l option to grep prints only the names of files that contain matches.

Command substitution, like variable and tilde expansion, is done within double quotes. Therefore, our rule in Chapter 1 and Chapter 3 about using single quotes for strings unless they contain variables will now be extended: "When in doubt, use single quotes, unless the string contains variables or command substitutions, in which case use double quotes."

Command substitution helps us with the solution to the next programming task, which relates to the album database in Task 4-1.

Task 4-5

The file used in Task 4-1 is actually a report derived from a bigger table of data about albums. This table consists of several columns, or fields, to which a user refers by names like "artist," "title," "year," etc. The columns are separated by vertical bars (|, the same as the UNIX pipe character). To deal with individual columns in the table, field names need to be converted to field numbers.

Suppose there is a shell function called getfield that takes the field name as argument and writes the corresponding field (or column) number on the standard output. Use this routine to help extract a column from the data table.

The cut utility is a natural for this task. cut is a data filter: it extracts columns from tabular data. If you supply the numbers of columns you want to extract from the input, cut will print only those columns on the standard output. Columns can be character positions or—relevant in this example—fields that are separated by TAB characters or other delimiters.[11] Assume that the data table in our task is a file called albums and that it looks like this:

Depeche Mode|Speak and Spell|Mute Records|1981
Depeche Mode|Some Great Reward|Mute Records|1984
Depeche Mode|101|Mute Records|1989
Depeche Mode|Violator|Mute Records|1990
Depeche Mode|Songs of Faith and Devotion|Mute Records|1993
...

Here is how we would use cut to extract the fourth (year) column:

cut -f4 -d\| albums

The -d argument is used to specify the character used as field delimiter (TAB is the default). The vertical bar must be backslash-escaped so that the shell doesn't try to interpret it as a pipe.

From this line of code and the getfield routine, we can easily derive the solution to the task. Assume that the first argument to getfield is the name of the field the user wants to extract. Then the solution is:

fieldname=$1
cut -f$(getfield $fieldname) -d\| albums

If we called this script with the argument year, the output would be:

1981
1984
1989
1990
1993
...

Task 4-6 shows another small task that makes use of cut.

Task 4-6

Send a mail message to everyone who is currently logged in.

The command who tells you who is logged in (as well as which terminal they're on and when they logged in). Its output looks like this:

root     tty1         Oct 13 12:05
michael  tty5         Oct 13 12:58
cam      tty23        Oct 13 11:51
kilrath  tty25        Oct 13 11:58

The fields are separated by spaces, not TABs. Since we need the first field, we can get away with using a space as the field separator in the cut command. (Otherwise we'd have to use the option to cut that uses character columns instead of fields.) To provide a space character as an argument on a command line, you can surround it by quotes:

$ who | cut -d' ' -f1

With the above who output, this command's output would look like this:

root
michael
cam
kilrath

This leads directly to a solution to the task. Just type:

$ mail $(who | cut -d' ' -f1)

The command mail root michael cam kilrath will run and then you can type your message.

Task 4-7 is another task that shows how useful command pipelines can be in command substitution.

Task 4-7

The ls command gives you pattern-matching capability with wildcards, but it doesn't allow you to select files by modification date. Devise a mechanism that lets you do this.

Here is a function that allows you to list all files that were last modified on the date you give as argument. Once again, we choose a function for speed reasons. No pun is intended by the function's name:

function lsd
{
    date=$1
    ls -l | grep -i "^.\{42\}$date" | cut -c55-
}

This function depends on the column layout of the ls -l command. In particular, it depends on dates starting in column 42 and filenames starting in column 55. If this isn't the case in your version of UNIX, you will need to adjust the column numbers.[12]

We use the grep search utility to match the date given as argument (in the form Mon DD, e.g., Jan 15 or Oct 6, the latter having two spaces) to the output of ls -l. This gives us a long listing of only those files whose dates match the argument. The -i option to grep allows you to use all lowercase letters in the month name, while the rather fancy argument means, "Match any line that contains 41 characters followed by the function argument." For example, typing lsd `jan 15' causes grep to search for lines that match any 41 characters followed by jan 15 (or Jan 15).[13]

The output of grep is piped through our ubiquitous friend cut to retrieve the filenames only. The argument to cut tells it to extract characters in column 55 through the end of the line.

With command substitution, you can use this function with any command that accepts filename arguments. For example, if you want to print all files in your current directory that were last modified today, and today is January 15th, you could type:

$ lp $(lsd 'jan 15')

The output of lsd is on multiple lines (one for each filename), but LINEFEEDs are legal field separators for the lp command, because the environment variable IFS (see earlier in this chapter) contains LINEFEED by default.

[9] Bourne and C shell users should note that the command substitution syntax of those shells, `UNIX command ` (with backward quotes, or grave accents), is also supported by bash for backward compatibility reasons. However, it is harder to read and less conducive to nesting.

[10] Not available in versions of bash prior to 2.02.

[11] Some older BSD-derived systems don't have cut, but you can use awk instead. Whenever you see a command of the form: cut -f N -d C filename, use this instead: awk -F C '{print $ N }' filename.

[12] For example, ls -l on SunOS 4.1.x has dates starting in column 33 and filenames starting in column 46.

[13] Some older BSD-derived versions of UNIX (without System V extensions) do not support the \{ N \} option. For this example, use 42 periods in a row instead of .\{42\}.

Advanced Examples: pushd and popd

We will conclude this chapter with a couple of functions that are already built into bash but are useful in demonstrating some of the concepts we have covered in this chapter.[14]

Task 4-8

The functions pushd and popd implement a stack of directories that enable you to move to another directory temporarily and have the shell remember where you were. Implement them as shell functions.

We will start by implementing a significant subset of their capabilities and finish the implementation in Chapter 6.

Think of a stack as a spring-loaded dish receptacle in a cafeteria. When you place dishes on the receptacle, the spring compresses so that the top stays at roughly the same level. The dish most recently placed on the stack is the first to be taken when someone wants food; thus, the stack is known as a "last-in, first-out" or LIFO structure. Putting something onto a stack is known in computer science parlance as pushing, and taking something off the top is called popping.

A stack is very handy for remembering directories, as we will see; it can "hold your place" up to an arbitrary number of times. The cd - form of the cd command does this, but only to one level. For example: if you are in firstdir and then you change to seconddir, you can type cd - to go back. But if you start out in firstdir, then change to seconddir, and then go to thirddir, you can use cd - only to go back to seconddir. If you type cd - again, you will be back in thirddir, because it is the previous directory.[15]

If you want the "nested" remember-and-change functionality that will take you back to firstdir, you need a stack of directories along with the pushd and popd commands. Here is how these work:

The first time pushd dir is called, pushd pushes the current directory onto the stack, then cds to dir and pushes it onto the stack.

Subsequent calls to pushd dir cd to dir and push dir only onto the stack.

popd removes the top directory off the stack, revealing a new top. Then it cds to the new top directory.

For example, consider the series of events in Table 4-4. Assume that you have just logged in, and that you are in your home directory (/home/you).

Table 4-4. pushd/popd example

Command

Stack contents

Result directory

pushd lizard

/home/you/lizard /home/you

/home/you/lizard

pushd /etc

/etc /home/you/lizard /home/you

/etc

popd

/home/you/lizard /home/you

/home/you/lizard

popd

/home/you

/home/you

popd

<empty>

(error)

We will implement a stack as an environment variable containing a list of directories separated by spaces.[16]

Your directory stack should be initialized to the null string when you log in. To do this, put this in your .bash_profile:

DIR_STACK=""
export DIR_STACK

Do not put this in your environment file if you have one. The export statement guarantees that DIR_STACK is known to all subprocesses; you want to initialize it only once. If you put this code in an environment file, it will get reinitialized in every subshell, which you probably don't want.

Next, we need to implement pushd and popd as functions. Here are our initial versions:

pushd ( )
{
    dirname=$1
    DIR_STACK="$dirname ${DIR_STACK:-$PWD' '}"
    cd ${dirname:?"missing directory name."}
    echo "$DIR_STACK"
}

popd ( )
{
    DIR_STACK=${DIR_STACK#* }
    cd ${DIR_STACK%% *}
    echo "$PWD"
}

Notice that there isn't much code! Let's go through the two functions and see how they work, starting with pushd. The first line merely saves the first argument in the variable dirname for readability reasons.

The second line of the function pushes the new directory onto the stack. The expression ${DIR_STACK:-$PWD` '} evaluates to $DIR_STACK if it is non-null or $PWD'' (the current directory and a space) if it is null. The expression within double quotes, then, consists of the argument given, followed by a single space, followed by DIR_STACK or the current directory and a space. The trailing space on the current directory is required for pattern matching in the popd function; each directory in the stack is considered to be of the form "dirname".

The double quotes in the assignment ensure that all of this is packaged into a single string for assignment back to DIR_STACK. Thus, this line of code handles the special initial case (when the stack is empty) as well as the more usual case (when it's not empty).

The third line's main purpose is to change to the new directory. We use the :? operator to handle the error when the argument is missing: if the argument is given, then the expression ${dirname:?"missing directory name."} evaluates to $dirname, but if it is not given, the shell will print the message pushd: dirname: missing directory name and exit from the function.

The last line merely prints the contents of the stack, with the implication that the leftmost directory is both the current directory and at the top of the stack. (This is why we chose spaces to separate directories, rather than the more customary colons as in PATH and MAILPATH.)

The popd function makes yet another use of the shell's pattern-matching operators. Its first line uses the # operator, which tries to delete the shortest match of the pattern "* " (anything followed by a space) from the value of DIR_STACK. The result is that the top directory and the space following it are deleted from the stack. This is why we need the space on the end of the first directory pushed onto the stack.

The second line of popd uses the pattern-matching operator %% to delete the longest match to the pattern "*" (a space followed by anything) from DIR_STACK. This extracts the top directory as an argument to cd, but it doesn't affect the value of DIR_STACK because there is no assignment. The final line just prints a confirmation message.

This code is deficient in four ways. First, it has no provision for errors. For example:

What if the user tries to push a directory that doesn't exist or is invalid?

What if the user tries popd and the stack is empty?

Test your understanding of the code by figuring out how it would respond to these error conditions. The second problem is that if you use pushd in a shell script, it will exit everything if no argument is given; ${ varname :? message } always exits from non-interactive shells. It won't, however, exit an interactive shell from which the function is called. The third deficiency is that it implements only some of the functionality of bash's pushd and popd commands—albeit the most useful parts. In the next chapter, we will see how to overcome all of these deficiencies.

The fourth problem with the code is that it will not work if, for some reason, a directory name contains a space. The code will treat the space as a separator character. We'll accept this deficiency for now, but you might like to think about how to overcome it in the next few chapters.

[14] Your copy of bash may not have pushd and popd, since it can be configured without these built-ins.

[15] Think of cd - as a synonym for cd $OLDPWD; see the previous chapter.

[16] bash also maintains a directory stack for the pushd and popd built-ins, accessible through the environment variable DIRSTACK. Unlike our version, however, it is implemented as an array (see Chapter 6 for details on arrays).

Chapter 5. Flow Control

If you are a programmer, you may have read the last chapter—with its claim at the outset that bash has an advanced set of programming capabilities—and wondered where many of the features from conventional languages were. Perhaps the most glaringly obvious "hole" in our coverage thus far concerns flow control constructs like if, for, while, and so on.

Flow control gives a programmer the power to specify that only certain portions of a program run, or that certain portions run repeatedly, according to conditions such as the values of variables, whether or not commands execute properly, and others. We call this the ability to control the flow of a program's execution.

Almost every shell script or function that's been shown thus far has had no flow control—they have just been lists of commands to be run! Yet bash, like the C and Bourne shells, has all of the flow control abilities you would expect and more; we will examine them in this chapter. We'll use them to enhance the solutions to some of the programming tasks we saw in the last chapter and to solve tasks that we will introduce here.

Although we have attempted to explain flow control so that nonprogrammers can understand it, we also sympathize with programmers who dread having to slog through yet another tabula rasa explanation. For this reason, some of our discussions relate bash's flow-control mechanisms to those that programmers should know already. Therefore you will be in a better position to understand this chapter if you already have a basic knowledge of flow control concepts.

bash supports the following flow control constructs:

if/else

Execute a list of statements if a certain condition is/is not true

for

Execute a list of statements a fixed number of times

while

Execute a list of statements repeatedly while a certain condition holds true

until

Execute a list of statements repeatedly until a certain condition holds true

case

Execute one of several lists of statements depending on the value of a variable

In addition, bash provides a new type of flow-control construct:

select

Allow the user to select one of a list of possibilities from a menu

We will now cover each of these in detail.

if/else

The simplest type of flow control construct is the conditional, embodied in bash's if statement. You use a conditional when you want to choose whether or not to do something, or to choose among a small number of things to do, according to the truth or falsehood of conditions. Conditions test values of shell variables, characteristics of files, whether or not commands run successfully, and other factors. The shell has a large set of built-in tests that are relevant to the task of shell programming.

The if construct has the following syntax:

if condition
then
    statements
[elif condition
    then statements...]
[else
 statements]
fi

The simplest form (without the elif and else parts, or clauses) executes the statements only if the condition is true. If you add an else clause, you get the ability to execute one set of statements if a condition is true or another set of statements if the condition is false. You can use as many elif (a contraction of "else if") clauses as you wish; they introduce more conditions, and thus more choices for which set of statements to execute. If you use one or more elifs, you can think of the else clause as the "if all else fails" part.

Exit Status

Perhaps the only aspect of this syntax that differs from that of conventional languages like C and Pascal is that the "condition" is really a list of statements rather than the more usual Boolean (true or false) expression. How is the truth or falsehood of the condition determined? It has to do with a general UNIX concept that we haven't covered yet: the exit status of commands.

Every UNIX command, whether it comes from source code in C, some other language, or a shell script/function, returns an integer code to its calling process—the shell in this case—when it finishes. This is called the exit status. 0 is usually the OK exit status, while anything else (1 to 255) usually denotes an error. [1]

if checks the exit status of the last statement in the list following the if keyword. The list is usually just a single statement. If the status is 0, the condition evaluates to true; if it is anything else, the condition is considered false. The same is true for each condition attached to an elif statement (if any).

This enables us to write code of the form:

if command ran successfully
then
   normal processing
else
   error processing
fi

More specifically, we can now improve on the pushd function that we saw in the last chapter:

pushd ( )
{
    dirname=$1
    DIR_STACK="$dirname ${DIR_STACK:-$PWD' '}"
    cd ${dirname:?"missing directory name."}
    echo $DIR_STACK
}

This function requires a valid directory as its argument. Let's look at how it handles error conditions: if no argument is given, the third line of code prints an error message and exits. This is fine.

However, the function reacts deceptively when an argument is given that isn't a valid directory. In case you didn't figure it out when reading the last chapter, here is what happens: the cd fails, leaving you in the same directory you were in. This is also appropriate. But the second line of code has pushed the bad directory onto the stack anyway, and the last line prints a message that leads you to believe that the push was successful. Even placing the cd before the stack assignment won't help because it doesn't exit the function if there is an error.

We need to prevent the bad directory from being pushed and to print an error message. Here is how we can do this:

pushd ( )
{
  dirname=$1
  if cd ${dirname:?"missing directory name."}    # if cd was successful
  then
      DIR_STACK="$dirname ${DIR_STACK:-$PWD' '}" # push the directory
      echo $DIR_STACK
  else
      echo still in $PWD.                        # else do nothing
  fi
}

The call to cd is now inside an if construct. If cd is successful, it will return 0; the next two lines of code are run, finishing the pushd operation. But if the cd fails, it returns with exit status 1, and pushd will print a message saying that you haven't gone anywhere.

Notice that in providing the check for a bad directory, we have slightly altered the way pushd functions. The stack will now always start out with two copies of the first directory pushed onto it. That is because $PWD is expanded after the new directory has been changed to. We'll fix this in the next section.

You can usually rely on built-in commands and standard UNIX utilities to return appropriate exit statuses, but what about your own shell scripts and functions? For example, what if you wrote a cd function that overrides the built-in command?

Let's say you have the following code in your .bash_profile.

cd ( )
{
    builtin cd "$@"
    echo "$OLDPWD --> $PWD"
}

The function cd simply changes directories and prints a message saying where you were and where you are now. Because functions have higher priority than most built-in commands in the shell's order of command look-up, we need to make sure that the built-in cd is called, otherwise the shell will enter an endless loop of calling the function, known as infinite recursion.

The builtin command allows us to do this. builtin tells the shell to use the built-in command and ignore any function of that name. Using builtin is easy; you just give it the name of the built-in you want to execute and any parameters you want to pass. If you pass in the name of something which isn't a built-in command, builtin will display an appropriate message. For example: builtin: alice: not a shell builtin.

We want this function to return the same exit status that the built-in cd returns. The problem is that the exit status is reset by every command, so it "disappears" if you don't save it immediately. In this function, the built-in cd's exit status disappears when the echo statement runs (and sets its own exit status).

Therefore, we need to save the status that cd sets and use it as the entire function's exit status. Two shell features we haven't seen yet provide the way. First is the special shell variable ?, whose value ($?) is the exit status of the last command that ran. For example:

cd baddir
echo $?

causes the shell to print 1, while the following command causes it to print 0:

cd gooddir
echo $?

So, to save the exit status we need to assign the value of ? to a variable with the line es=$? right after the cd is done.

Return

The second feature we need is the statement return N, which causes the surrounding function to exit with exit status N. N is actually optional; it defaults to the exit status of the last command. Functions that finish without a return statement (i.e., every one we have seen so far) return whatever the last statement returns. return can only be used inside functions, and shell scripts that have been executed with source. In contrast, the statement exit N exits the entire script, no matter how deeply you are nested in functions.

Getting back to our example: if the call to the built-in cd were last in our cd function, it would behave properly. Unfortunately, we really need the assignment statement where it is. Therefore we need to save cd's exit status and return it as the function's exit status. Here is how to do it:

cd ( )
{
    builtin cd "$@"
    es=$?
    echo "$OLDPWD --> $PWD"
    return $es
}

The second line saves the exit status of cd in the variable es; the fourth returns it as the function's exit status. We'll see a substantial cd "wrapper" in Chapter 7.

Exit statuses aren't very useful for anything other than their intended purpose. In particular, you may be tempted to use them as "return values" of functions, as you would with functions in C or Pascal. That won't work; you should use variables or command substitution instead to simulate this effect.

Combinations of Exit Statuses

One of the more obscure parts of bash syntax allows you to combine exit statuses logically, so that you can test more than one thing at a time.

The syntax statement1 && statement2 means, "execute statement1, and if its exit status is 0, execute statement2." The syntax statement1 || statement2 is the converse: it means, "execute statement1, and if its exit status is not 0, execute statement2." At first, these look like "if/then" and "if not/then" constructs, respectively. But they are really intended for use within conditions of if constructs—as C programmers will readily understand.

It's much more useful to think of these constructs as "and" and "or," respectively. Consider this:

if statement1 && statement2
then
    ...
fi

In this case, statement1 is executed. If it returns a 0 status, then presumably it ran without error. Then statement2 runs. The then clause is executed if statement2 returns a 0 status. Conversely, if statement1 fails (returns a non-zero exit status), then statement2 doesn't even run; the last statement that actually ran was statement1, which failed—so the then clause doesn't run, either. Taken all together, it's fair to conclude that the then clause runs if statement1 and statement2 both succeeded.

Similarly, consider this:

if statement1 || statement2
then
    ...
fi

If statement1 succeeds, then statement2 does not run. This makes statement1 the last statement, which means that the then clause runs. On the other hand, if statement1 fails, then statement2 runs, and whether the then clause runs or not depends on the success of statement2. The upshot is that the then clause runs if statement1 or statement2 succeeds.

bash also allows you to reverse the return status of a statement with the use of !, the logical "not". Preceding a statement with ! will cause it to return 0 if it fails and 1 if it succeeds. We'll see an example of this at the end of this chapter.

As a simple example of testing exit statuses, assume that we need to write a script that checks a file for the presence of two words and just prints a message saying whether either word is in the file or not. We can use grep for this: it returns exit status 0 if it found the given string in its input, non-zero if not:

filename=$1
word1=$2
word2=$3

if grep $word1 $filename || grep $word2 $filename
then
    echo "$word1 or $word2 is in $filename."
fi

The then clause of this code runs if either grep statement succeeds. Now assume that we want the script to say whether the input file contains both words. Here's how to do it:

filename=$1
word1=$2
word2=$3

if grep $word1 $filename && grep $word2 $filename
then
    echo "$word1 and $word2 are both in $filename."
fi

We'll see more examples of these logical operators later in this chapter.

Condition Tests

Exit statuses are the only things an if construct can test. But that doesn't mean you can check only whether commands ran properly. The shell provides two ways of testing a variety of conditions. The first is with the [...] construct, which is available in many different versions of the Bourne shell.[2] The second is by using the newer [[...]] construct.[3] The second version is identical to the first except that word splitting and pathname expansion are not performed on the words within the brackets. For the examples in this chapter we will use the first form of the construct.

You can use the construct to check many different attributes of a file (whether it exists, what type of file it is, what its permissions and ownership are, etc.), compare two files to see which is newer, and do comparisons on strings.

[ condition ] is actually a statement just like any other, except that the only thing it does is return an exit status that tells whether condition is true. (The spaces after the opening bracket "[" and before the closing bracket "]" are required.) Thus it fits within the if construct's syntax.

String comparisons

The square brackets ([]) surround expressions that include various types of operators. We will start with the string comparison operators, listed in Table 5-1. (Notice that there are no operators for "greater than or equal" or "less than or equal" comparisons.) In the table, str1 and str2 refer to expressions with a string value.

Table 5-1. String comparison operators

Operator

True if...

str1 = str2[4]

str1 matches str2

str1 != str2

str1 does not match str2

str1 < str2

str1 is less than str2

str1 > str2

str1 is greater than str2

-n str1

str1 is not null (has length greater than 0)

-z str1

str1 is null (has length 0)

[4] Note that there is only one equal sign (=). This is a common source of error.

We can use one of these operators to improve our popd function, which reacts badly if you try to pop and the stack is empty. Recall that the code for popd is:

popd ( )
{
    DIR_STACK=${DIR_STACK#* }
    cd ${DIR_STACK%% *}
    echo "$PWD"
}

If the stack is empty, then $DIR_STACK is the null string, as is the expression ${DIR_STACK%% }. This means that you will change to your home directory; instead, we want popd to print an error message and do nothing.

To accomplish this, we need to test for an empty stack, i.e., whether $DIR_STACK is null or not. Here is one way to do it:

popd ( )
{
    if [ -n "$DIR_STACK" ]; then
        DIR_STACK=${DIR_STACK#* }
        cd ${DIR_STACK%% *}
        echo "$PWD"
    else
        echo "stack empty, still in $PWD."
    fi
}

In the condition, we have placed the $DIR_STACK in double quotes, so that when it is expanded it is treated as a single word. If you don't do this, the shell will expand $DIR_STACK to individual words and the test will complain that it was given too many arguments.

There is another reason for placing $DIR_STACK in double quotes, which will become important later on: sometimes the variable being tested will expand to nothing, and in this example the test will become [ -n ], which returns true. Surrounding the variable in double quotes ensures that even if it expands to nothing, there will be an empty string as an argument (i.e., [ -n "" ]).

Also notice that instead of putting then on a separate line, we put it on the same line as the if after a semicolon, which is the shell's standard statement separator character.

We could have used operators other than -n. For example, we could have used -z and switched the code in the then and else clauses.

While we're cleaning up code we wrote in the last chapter, let's fix up the error handling in the highest script (Task 4-1). The code for that script was:

filename=${1:?"filename missing."}
howmany=${2:-10}
sort -nr $filename | head -$howmany

Recall that if you omit the first argument (the filename), the shell prints the message highest: 1: filename missing. We can make this better by substituting a more standard "usage" message. While we are at it, we can also make the command more in line with conventional UNIX commands by requiring a dash before the optional argument.

if [ -z "$1" ]; then
    echo 'usage: highest filename [-N]'
else
  filename=$1
  howmany=${2:--10}
  sort -nr $filename | head $howmany
fi

Notice that we have moved the dash in front of $howmany inside the parameter expansion ${2:—10}.

It is considered better programming style to enclose all of the code in the if-then-else, but such code can get confusing if you are writing a long script in which you need to check for errors and bail out at several points along the way. Therefore, a more usual style for shell programming follows.

if [ -z "$1" ]; then
    echo 'usage: highest filename [-N]'
    exit 1
fi

filename=$1
howmany=${2:--10}
sort -nr $filename | head $howmany

The exit statement informs any calling program whether it ran successfully or not.

As an example of the = operator, we can add to the graphics utility that we touched on in Task 4-2. Recall that we were given a filename ending in .pcx (the original graphics file), and we needed to construct a filename that was the same but ended in .jpg (the output file). It would be nice to be able to convert several other types of formats to JPEG files so that we could use them on a web page. Some common types we might want to convert besides PCX include XPM (X PixMap), TGA (Targa), TIFF (Tagged Image File Format), and GIF.

We won't attempt to perform the actual manipulations needed to convert one graphics format to another ourselves. Instead we'll use some tools that are freely available on the Internet, graphics conversion utilities from the NetPBM archive. [5]

Don't worry about the details of how these utilities work; all we want to do is create a shell frontend that processes the filenames and calls the correct conversion utilities. At this point it is sufficient to know that each conversion utility takes a filename as an argument and sends the results of the conversion to standard output. To reduce the number of conversion programs necessary to convert between the 30 or so different graphics formats it supports, NetPBM has its own set of internal formats. These are called Portable Anymap files (also called PNMs) with extensions .ppm (Portable Pix Map) for color images, .pgm (Portable Gray Map) for grayscale images, and .pbm (Portable Bit Map) for black and white images. Each graphics format has a utility to convert to and from this "central" PNM format.

The frontend script we are developing should first choose the correct conversion utility based on the filename extension, and then convert the resulting PNM file into a JPEG:

filename=$1
extension=${filename##*.}
pnmfile=${filename%.*}.pnm
outfile=${filename%.*}.jpg

if [ -z $filename ]; then
    echo "procfile: No file specified"
    exit 1
fi

if [ $extension = jpg ]; then
    exit 0
elif [ $extension = tga ]; then
    tgatoppm $filename > $pnmfile
elif [ $extension = xpm ]; then
    xpmtoppm $filename > $pnmfile
elif [ $extension = pcx ]; then
    pcxtoppm $filename > $pnmfile
elif [ $extension = tif ]; then
    tifftopnm $filename > $pnmfile
elif [ $extension = gif ]; then
    giftopnm $filename > $pnmfile
else
    echo "procfile: $filename is an unknown graphics file."
    exit 1
fi

pnmtojpeg $pnmfile > $outfile

rm $pnmfile

Recall from the previous chapter that the expression ${filename%.*} deletes the extension from filename; ${filename##*.} deletes the basename and keeps the extension.

Once the correct conversion is chosen, the script runs the utility and writes the output to a temporary file. The second to last line takes the temporary file and converts it to a JPEG. The temporary file is then removed. Notice that if the original file was a JPEG we just exit without having to do any processing.

This script has a few problems. We'll look at improving it later in this chapter.

File attribute checking

The other kind of operator that can be used in conditional expressions checks a file for certain properties. There are 24 such operators. We will cover those of most general interest here; the rest refer to arcana like sticky bits, sockets, and file descriptors, and thus are of interest only to systems hackers. Refer to Appendix B for the complete list. Table 5-2 lists those that we will examine.

Table 5-2. File attribute operators

Operator

True if...

-a file

file exists

-d file

file exists and is a directory

-e file

file exists; same as - a

-f file

file exists and is a regular file (i.e., not a directory or other special type of file)

-r file

You have read permission on file

-s file

file exists and is not empty

-w file

You have write permission on file

-x file

You have execute permission on file, or directory search permission if it is a directory

-N file

file was modified since it was last read

-O file

You own file

-G file

file 's group ID matches yours (or one of yours, if you are in multiple groups)

file1 -nt file2

file1 is newer than file2 [6]

file1 -ot file2

file1 is older than file2

[6] Specifically, the -nt and -ot operators compare modification times of two files.

Before we get to an example, you should know that conditional expressions inside [ and ] can also be combined using the logical operators && and ||, just as we saw with plain shell commands, in the previous section entitled Section 5.1.3 ." For example:

if [ condition ] && [ condition ]; then

It's also possible to combine shell commands with conditional expressions using logical operators, like this:

if command && [ condition ]; then
    ...

You can also negate the truth value of a conditional expression by preceding it with an exclamation point (!), so that ! expr evaluates to true only if expr is false. Furthermore, you can make complex logical expressions of conditional operators by grouping them with parentheses (which must be "escaped" with backslashes to prevent the shell from treating them specially), and by using two logical operators we haven't seen yet: -a (AND) and -o (OR).

The -a and -o operators are similar to the && and || operators used with exit statuses. However, unlike those operators, -a and -o are only available inside a test conditional expression.

Here is how we would use two of the file operators, a logical operator, and a string operator to fix the problem of duplicate stack entries in our pushd function. Instead of having cd determine whether the argument given is a valid directory—i.e., by returning with a bad exit status if it's not—we can do the checking ourselves. Here is the code:

pushd ( )
{
    dirname=$1
    if [ -n "$dirname" ] && [ \( -d "$dirname" \) -a \
            \( -x "$dirname" \) ]; then
        DIR_STACK="$dirname ${DIR_STACK:-$PWD' '}"
        cd $dirname
        echo "$DIR_STACK"
    else
        echo "still in $PWD."
    fi
}

The conditional expression evaluates to true only if the argument $1 is not null (-n), a directory (-d) and the user has permission to change to it (-x).[7] Notice that this conditional handles the case where the argument is missing ($dirname is null) first; if it is, the rest of the condition is not executed. This is important because, if we had just put:

if [ \( -n "$dirname"\) -a  \( -d "$dirname" \) -a \
         \( -x "$dirname" \) ]; then

the second condition, if null, would cause test to complain and the function would exit prematurely.

Here is a more comprehensive example of the use of file operators.

Task 5-1

Write a script that prints essentially the same information as ls -l but in a more user-friendly way.

Although the code for this task looks at first sight quite complicated, it is a straightforward application of many of the file operators:

if [ ! -e "$1" ]; then
    echo "file $1 does not exist."
    exit 1
fi
if [ -d "$1" ]; then
    echo -n "$1 is a directory that you may "
    if [ ! -x "$1" ]; then
        echo -n "not "
    fi
    echo "search."
elif [ -f "$1" ]; then
    echo "$1 is a regular file."
else
    echo "$1 is a special type of file."
fi
if [ -O "$1" ]; then
    echo 'you own the file.'
else
    echo 'you do not own the file.'
fi
if [ -r "$1" ]; then
    echo 'you have read permission on the file.'
fi
if [ -w "$1" ]; then
    echo 'you have write permission on the file.'
fi
if [ -x "$1" -a ! -d "$1" ]; then
    echo 'you have execute permission on the file.'
fi

We'll call this script fileinfo. Here's how it works:

The first conditional tests if the file given as argument does not exist (the exclamation point is the "not" operator; the spaces around it are required). If the file does not exist, the script prints an error message and exits with error status.

The second conditional tests if the file is a directory. If so, the first echo prints part of a message; remember that the -n option tells echo not to print a LINEFEED at the end. The inner conditional checks if you do not have search permission on the directory. If you don't have search permission, the word "not" is added to the partial message. Then, the message is completed with "search." and a LINEFEED.

The elif clause checks if the file is a regular file; if so, it prints a message.

The else clause accounts for the various special file types on recent UNIX systems, such as sockets, devices, FIFO files, etc. We assume that the casual user isn't interested in details of these.

The next conditional tests to see if the file is owned by you (i.e., if its owner ID is the same as your login ID). If so, it prints a message saying that you own it.

The next two conditionals test for your read and write permission on the file.

The last conditional checks if you can execute the file. It checks to see if you have execute permission and that the file is not a directory. (If the file were a directory, execute permission would really mean directory search permission.) In this test we haven't used any brackets to group the tests and have relied on operator precedence. Simply put, operator precedence is the order in which the shell processes the operators. This is exactly the same concept as arithmetic precedence in mathematics, where multiply and divide are done before addition and subtraction. In our case, [ -x "$1" -a ! -d "$1" ] is equivalent to [\( -x "$1" \) -a \( ! -d "$1" \) ]. The file tests are done first, followed by any negations (!) and followed by the AND and OR tests.

As an example of fileinfo's output, assume that you do an ls -l of your current directory and it contains these lines:

-rwxr-xr-x   1 cam      users        2987 Jan 10 20:43 adventure
-rw-r--r--   1 cam      users          30 Jan 10 21:45 alice
-r--r--r--   1 root     root        58379 Jan 11 21:30 core
drwxr-xr-x   2 cam      users        1024 Jan 10 21:41 dodo

alice and core are regular files, dodo is a directory, and adventure is a shell script. Typing fileinfo adventure produces this output:

adventure is a regular file.
you own the file.
you have read permission on the file.
you have write permission on the file.
you have execute permission on the file.

Typing fileinfo alice results in this:

alice is a regular file.
you own the file.
you have read permission on the file.
you have write permission on the file.

Finally, typing fileinfo dodo results in this:

dodo is a directory that you may search.
you own the file.
you have read permission on the file.
you have write permission on the file.

Typing fileinfo core produces this:

core is a regular file.
you do not own the file.
you have read permission on the file.

Integer Conditionals

The shell also provides a set of arithmetic tests. These are different from character string comparisons like < and >, which compare lexicographic values of strings,[8] not numeric values. For example, "6" is greater than "57" lexicographically, just as "p" is greater than "ox," but of course the opposite is true when they're compared as integers.

The integer comparison operators are summarized in Table 5-3.

Table 5-3. Arithmetic test operators

Test

Comparison

-lt

Less than

-le

Less than or equal

-eq

Equal

-ge

Greater than or equal

-gt

Greater than

-ne

Not equal

You'll find these to be of the most use in the context of the integer variables we'll see in the next chapter. They're necessary if you want to combine integer tests with other types of tests within the same conditional expression.

However, the shell has a separate syntax for conditional expressions that involve integers only. It's considerably more efficient, so you should use it in preference to the arithmetic test operators listed above. Again, we'll cover the shell's integer conditionals in the next chapter.

[1] Because this is a convention and not a "law," there are exceptions. For example, diff (find differences between two files) returns 0 for "no differences," 1 for "differences found," or 2 for an error such as an invalid filename argument.

[2] The built-in command test is synonymous with [...]. For example, to test the equivalence of two strings you can either put [ string1 = string2 ] or test string1 = string2.

[3] [[...]] is not available in versions of bash prior to 2.05.

[5] NetPBM is a free, portable graphics conversion utility package. Further details can be found on the NetPBM homepage http://netpbm.sourceforge.net/

[7] Remember that the same permission flag that determines execute permission on a regular file determines search permission on a directory. This is why the -x operator checks both things depending on file type.

[8] "Lexicographic order" is really just "dictionary order."

for

The most obvious enhancement to make the previous script is the ability to report on multiple files instead of just one. Tests like -e and -d take only single arguments, so we need a way of calling the code once for each file given on the command line.

The way to do this—indeed, the way to do many things with bash—is with a looping construct. The simplest and most widely applicable of the shell's looping constructs is the for loop. We'll use for to enhance fileinfo soon.

The for loop allows you to repeat a section of code a fixed number of times. During each time through the code (known as an iteration), a special variable called a loop variable is set to a different value; this way each iteration can do something slightly different.

The for loop is somewhat, but not entirely, similar to its counterparts in conventional languages like C and Pascal. The chief difference is that the shell's standard for loop doesn't let you specify a number of times to iterate or a range of values over which to iterate; instead, it only lets you give a fixed list of values. In other words, you can't do anything like this Pascal-type code, which executes statements 10 times:

for x := 1 to 10 do
begin
    statements...
end

However, the for loop is ideal for working with arguments on the command line and with sets of files (e.g., all files in a given directory). We'll look at an example of each of these. But first, we'll show the syntax for the for construct:

for name [in list]
do
    statements that can use
            $name...
done

The list is a list of names. (If in list is omitted, the list defaults to "$@", i.e., the quoted list of command-line arguments, but we'll always supply the in list for the sake of clarity.) In our solutions to the following task, we'll show two simple ways to specify lists.

Task 5-2

Task 4-4 used pattern matching and substitution to list the directories in PATH, one to a line. Unfortunately, old versions of bash don't have that particular pattern operator. Write a general shell script, listpath, that prints each directory in PATH, one per line. In addition, have it print out information about each directory, such as the permissions and the modification times.

The easiest way to do this is by changing the IFS variable we saw in Chapter 4:

IFS=:

for dir in $PATH
do
    ls -ld $dir
done

This sets the IFS to be a colon, which is the separator used in PATH. The for loop loops through, setting dir to each of the colon delimited fields in PATH. ls is used to print out the directory name and associated information. The -l parameter specifies the "long" format and the -d tells ls to show only the directory itself and not its contents.

In using this you might see an error generated by ls saying, for example, ls: /usr/TeX/bin: No such file or directory. It indicates that a directory in PATH doesn't exist. We can modify the listpath script to check the PATH variable for nonexistent directories by adding some of the tests we saw earlier:

IFS=:

for dir in $PATH; do
    if [ -z "$dir" ]; then dir=.; fi

    if ! [ -e "$dir" ]; then
        echo "$dir doesn't exist"
    elif ! [ -d "$dir" ]; then
        echo "$dir isn't a directory"
    else
        ls -ld $dir
    fi
done

This time, as the script loops, we first check to see if the length of $dir is zero (caused by having a value of :: in the PATH). If it is, we set it to the current directory, then check to see if the directory doesn't exist. If it doesn't, we print out an appropriate message. Otherwise, we check to see if the file is not a directory. If it isn't, we say so.

The foregoing illustrated a simple use of for, but it's much more common to use for to iterate through a list of command-line arguments. To show this, we can enhance the fileinfo script above to accept multiple arguments. First, we write a bit of "wrapper" code that does the iteration:

for filename in "$@" ; do
    finfo "$filename"
    echo
done

Next, we make the original script into a function called finfo:[9]

finfo ( )
{
    if [ ! -e "$1" ]; then
        print "file $1 does not exist."
        return 1
    fi
    ...
}

The complete script consists of the for loop code and the above function, in either order; good programming style dictates that the function definition should go first.

The fileinfo script works as follows: in the for statement, "$@" is a list of all positional parameters. For each argument, the body of the loop is run with filename set to that argument. In other words, the function finfo is called once for each value of $filename as its first argument ($1). The call to echo after the call to finfo merely prints a blank line between sets of information about each file.

Given a directory with the same files as the earlier example, typing fileinfo* would produce the following output:

adventure is a regular file.
you own the file.
you have read permission on the file.
you have write permission on the file.
you have execute permission on the file.

alice is a regular file.
you own the file.
you have read permission on the file.
you have write permission on the file.

core is a regular file.
you do not own the file.
you have read permission on the file.

dodo is a directory that you may search.
you own the file.
you have read permission on the file.
you have write permission on the file.

Here is a programming task that exploits the other major use of for.

Task 5-3

It is possible to print out all of the directories below a given one by using the -R option of ls. Unfortunately, this doesn't give much idea about the directory structure because it prints all the files and directories line by line. Write a script that performs a recursive directory listing and produces output that gives an idea of the structure for a small number of subdirectories.

We'll probably want output that looks something like this:

.
        adventure
                aaiw
                        dodo
                        duchess
                        hatter
                        march_hare
                        queen
                        tarts
                biog
                ttlg
                        red_queen
                        tweedledee
                        tweedledum
        lewis.carroll

Each column represents a directory level. Entries below and to the right of an entry are files and directories under that directory. Files are just listed with no entries to their right. This example shows that the directory adventure and the file lewis.carroll are in the current directory; the directories aaiw and ttlg, and the file biog are under adventure, etc. To make life simple, we'll use TABs to line the columns up and ignore any "bleed over" of filenames from one column into an adjacent one.

We need to be able to traverse the directory hierarchy. To do this easily we'll use a programming technique known as recursion. Recursion is simply referencing something from itself; in our case, calling a piece of code from itself. For example, consider this script, tracedir, in your home directory:

file=$1
echo $file

if [ -d "$file" ]; then
    cd $file
    ~/tracedir $(ls)
    cd ..
fi

First we copy and print the first argument. Then we test to see if it is a directory. If it is, we cd to it and call the script again with an argument of the files in that directory. This script is recursive; when the first argument is a directory, a new shell is invoked and a new script is run on the new directory. The old script waits until the new script returns, then the old script executes a cd back up one level and exits. This happens in each invocation of the tracedir script. The recursion will stop only when the first argument isn't a directory.

Running this on the directory structure listed above with the argument adventure will produce:

adventure
aaiw
dodo

dodo is a file and the script exits.

This script has a few problems, but it is the basis for the solution to this task. One major problem with the script is that it is very inefficient. Each time the script is called, a new shell is created. We can improve on this by making the script into a function, because (as you probably remember from Chapter 4) functions are part of the shell they are started from. We also need a way to set up the TAB spacing. The easiest way is to have an initializing script or function and call the recursive routine from that. Let's look at this routine.

recls ( )
{
    singletab="\t"

    for tryfile in "$@"; do
        echo $tryfile
        if [ -d "$tryfile" ]; then
            thisfile=$tryfile
            recdir $(command ls $tryfile)
        fi
    done

    unset dir singletab tab
}

First, we set up a variable to hold the TAB character for the echo command (Chapter 7 explains all of the options and formatting commands you can use with echo). Then we loop through each argument supplied to the function and print it out. If it is a directory, we call our recursive routine, supplying the list of files with ls. We have introduced a new command at this point: command. command is a shell built-in that disables function and alias look-up. In this case, it is used to make sure that the ls command is one from your command search path, PATH, and not a function (for further information on command see Chapter 7). After it's all over, we clean up by unsetting the variables we have used.

Now we can expand on our earlier shell script.

recdir ( )
{
    tab=$tab$singletab

    for file in "$@"; do
        echo -e $tab$file
        thisfile=$thisfile/$file

        if [ -d "$thisfile" ]; then
            recdir $(command ls $thisfile)
        fi

        thisfile=${thisfile%/*}
    done

    tab=${tab%"$singletab"}
}

Each time it is called, recdir loops through the files it is given as arguments. For each one it prints the filename and then, if the file is a directory, calls itself with arguments set to the contents of the directory. There are two details that have to be taken care of: the number of TABs to use, and the pathname of the "current" directory in the recursion.

Each time we go down a level in the directory hierarchy we want to add a TAB character, so we append a TAB to the variable tab every time we enter recdir. Likewise, when we exit recdir we are moving up a directory level, so we remove the TAB when we leave the function. Initially, tab is not set, so the first time recdir is called, tab will be set to one TAB. If we recurse into a lower directory, recdir will be called again and another TAB will be appended. Remember that tab is a global variable, so it will grow and shrink in TABs for every entry and exit of recdir. The -e option to echo tells it to recognize escaped formatting characters, in our case the TAB character, \t.

In this version of the recursive routine we haven't used cd to move between directories. That means that an ls of a directory will have to be supplied with a relative path to files further down in the hierarchy. To do this, we need to keep track of the directory we are currently examining. The initialization routine sets the variable thisfile to the directory name each time a directory is found while looping. This variable is then used in the recursive routine to keep the relative pathname of the current file being examined. On each iteration of the loop, thisfile has the current filename appended to it, and at the end of the loop the filename is removed.

You might like to think of ways to modify the behavior and improve the output of this code. Here are some programming challenges:

In the current version, there is no way to determine if biog is a file or a directory. An empty directory looks no different to a file in the listing. Change the output so it appends a / to each directory name when it displays it.

Modify the code so that it only recurses down a maximum of eight subdirectories (which is about the maximum before the lines overflow the right-hand side of the screen). Hint: think about how TABs have been implemented.

Change the output so it includes dashed lines and adds a blank line after each directory, thus:

.
|
|-------adventure
|       |
|       |-------aaiw
|       |       |
|       |       |-------dodo
|       |       |-------duchess
|       |       |-------hatter
|       |       |-------march_hare
|       |       |-------queen
|       |       |-------tarts
|       |
|       |-------biog
...

Hint: you need at least two other variables that contain the characters "|" and "-".

At the start of this section we pointed out that the for loop in its standard form wasn't capable of iterating over a specified range of values as can be done in most programming languages. bash 2.0 introduced a new style of for loop which caters for this task; the arithmetic for loop. Well come back to it in the next chapter when we look at arithmetic operations.

[9] A function can have the same name as a script; however, this isn't good programming practice.

case

The next flow-control construct we will cover is case. While the case statement in Pascal and the similar switch statement in Java and C can be used to test simple values like integers and characters, bash's case construct lets you test strings against patterns that can contain wildcard characters. Like its conventional-language counterparts, case lets you express a series of if-then-else type statements in a concise way.

The syntax of case is as follows:

case expression
            in
            pattern1
            )
            statements ;;
             pattern2
            )
            statements ;;
             ...
            esac

Any of the patterns can actually be several patterns separated by pipe characters (|). If expression matches one of the patterns, its corresponding statements are executed. If there are several patterns separated by pipe characters, the expression can match any of them in order for the associated statements to be run. The patterns are checked in order until a match is found; if none is found, nothing happens.

This construct should become clearer with an example. Let's revisit our solution to Task 4-2 and the additions to it presented earlier in this chapter (our graphics utility). Remember that we wrote some code that processed input files according to their suffixes ( .pcx for PCX format, .gif for GIF format, etc.).

We can improve upon this solution in two ways. Firstly, we can use a for loop to allow multiple files to be processed one at a time; secondly, we can use the case construct to streamline the code:

for filename in "$@"; do
    pnmfile=${filename%.*}.ppm

    case $filename in
        *.jpg ) exit 0 ;;

        *.tga ) tgatoppm $filename > $pnmfile ;;

        *.xpm ) xpmtoppm $filename > $pnmfile ;;

        *.pcx ) pcxtoppm $filename > $pnmfile ;;

        *.tif ) tifftopnm $filename > $pnmfile ;;

        *.gif ) giftopnm $filename > $pnmfile ;;

            * ) echo "procfile: $filename is an unknown graphics file."
                exit 1 ;;
    esac

    outfile=${pnmfile%.ppm}.new.jpg

    pnmtojpeg $pnmfile > $outfile

    rm $pnmfile

done

The case construct in this code does the same thing as the if statements that we saw in the earlier version. It is, however, clearer and easier to follow.

The first six patterns in the case statement match the various file extensions that we wish to process. The last pattern matches anything that hasn't already been matched by the previous statements. It is essentially a catchall and is analogous to the default case in C.

There is another slight difference to the previous version; we have moved the pattern matching and replacement inside the added for loop that processes all of the command-line arguments. Each time we pass through the loop, we want to create a temporary and final file with a name based on the name in the current command-line argument.

We'll return to this example in Chapter 6, when we further develop the script and discuss how to handle dash options on the command line. In the meantime, here is a task that requires that we use case.

Task 5-4

Write a function that implements the Korn shell's cd old new. cd takes the pathname of the current directory and tries to find the string old. If it finds it, it substitutes new and attempts to change to the resulting directory.

We can implement this by using a case statement to check the number of arguments and the built-in cd command to do the actual change of directory.

Here is the code:[10]

cd( )
{
    case "$#" in
        0 | 1)  builtin cd $1 ;;
        2    ) newdir=${PWD//$1/$2}
                case "$newdir" in
                    $PWD)   echo "bash: cd: bad substitution" >&2 ;
                        return 1 ;;
                    *   )   builtin cd "$newdir" ;;
                esac ;;
        *    )  echo "bash: cd: wrong arg count" 1>&2 ; return 1 ;;
    esac
}

The case statement in this task tests the number of arguments to our cd command against three alternatives.

For zero or one arguments, we want our cd to work just like the built-in one. The first alternative in the case statement does this. It includes something we haven't used so far; the pipe symbol between the 0 and 1 means that either pattern is an acceptable match. If the number of arguments is either of these, the built-in cd is executed.

The next alternative is for two arguments, which is where we'll add the new functionality to cd. The first thing that has to be done is finding and replacing the old string with the new one. We use the pattern matching and replacement that we saw in the last chapter, the result being assigned to newdir. If the substitution didn't take place, the pathname will be unchanged. We'll use this fact in the next few lines.

Another case statement chooses between performing the cd or reporting an error because the new directory is unchanged. The * alternative is a catchall for anything other than the current pathname (caught by the first alternative).

You might notice one small problem with this code: if your old and new strings are the same you'll get bash:: cd: bad substitution. It should just leave you in the same directory with no error message, but because the directory path doesn't change, it uses the first alternative in the inner case statement. The problem lies in knowing if sed has performed a substitution or not. You might like to think about ways to fix this problem (hint: you could use grep to check whether the pathname has the old string in it).

The last alternative in the outer case statement prints an error message if there are more than two arguments.

[10] To make the function a little clearer, we've used some advanced I/O redirection. I/O redirection is covered in Chapter 7.

select

All of the flow-control constructs we have seen so far are also available in the Bourne shell, and the C shell has equivalents with different syntax. Our next construct, select, is available only in the Korn shell and bash;[11] moreover, it has no analogy in conventional programming languages.

select allows you to generate simple menus easily. It has concise syntax, but it does quite a lot of work. The syntax is:

select name
            [in
            list
            ]
do
    statements that can use
            $name...
done

This is the same syntax as for except for the keyword select. And like for, you can omit the in list and it will default to "$@", i.e., the list of quoted command-line arguments. Here is what select does:

Generates a menu of each item in list, formatted with numbers for each choice

Prompts the user for a number

Stores the selected choice in the variable name and the selected number in the built-in variable REPLY

Executes the statements in the body

Repeats the process forever (but see below for how to exit)

Here is a task that adds another command to our pushd and popd utilities.

Task 5-5

Write a function that allows the user to select a directory from a list of directories currently in the pushd directory stack. The selected directory is moved to the front of the stack and becomes the current working directory.

The display and selection of directories is best handled by using select. We can start off with something along the lines of:[12]

selectd ( )
{
    PS3='directory? '
    select selection in $DIR_STACK; do
        if [ $selection ]; then
            #statements that manipulate the stack...
            break
        else
            echo 'invalid selection.'
        fi
    done
}

If you type DIR_STACK="/usr /home /bin" and execute this function, you'll see:

1) /usr
2) /home
3) /bin
directory?

The built-in shell variable PS3 contains the prompt string that select uses; its default value is the not particularly useful "#?". So the first line of the above code sets it to a more relevant value.

The select statement constructs the menu from the list of choices. If the user enters a valid number (from 1 to the number of directories), then the variable selection is set to the corresponding value; otherwise it is null. (If the user just presses RETURN, the shell prints the menu again.)

The code in the loop body checks if selection is non-null. If so, it executes the statements we will add in a short while; then the break statement exits the select loop. If selection is null, the code prints an error message and repeats the menu and prompt.

The break statement is the usual way of exiting a select loop. Actually (like its analog in Java and C), it can be used to exit any surrounding control structure we've seen so far (except case, where the double semicolons act like break) as well as the while and until we will see soon. We haven't introduced break until now because it is considered bad coding style to use it to exit a loop. However, it can make code easier to read if used judiciously. break is necessary for exiting select when the user makes a valid choice. [13]

Now we'll add the missing pieces to the code:

selectd ( )
{
    PS3='directory? '
    dirstack=" $DIR_STACK "

    select selection in $dirstack; do
        if [ $selection ]; then
            DIR_STACK="$selection${dirstack%% $selection *}"
            DIR_STACK="$DIR_STACK ${dirstack##* $selection }"
            DIR_STACK=${DIR_STACK% }
            cd $selection
            break
        else
            echo 'invalid selection.'
        fi
    done
}

The first two lines initialize environment variables. dirstack is a copy of DIR_STACK with spaces appended at the beginning and end so that each directory in the list is of the form space directory space. This form simplifies the code when we come to manipulating the directory stack.

The select and if statements are the same as in our initial function. The new code inside the if uses bash's pattern-matching capability to manipulate the directory stack.

The first statement sets DIR_STACK to selection, followed by dirstack with everything from selection to the end of the list removed. The second statement adds everything in the list from the directory following selection to the end of DIR_STACK. The next line removes the trailing space that was appended at the start. To complete the operation, a cd is performed to the new directory, followed by a break to exit the select code.

As an example of the list manipulation performed in this function, consider a DIR_STACK set to /home /bin /usr2. In this case, dirstack would become /home /bin /usr2. Typing selectd would result in:

$ selectd
1) /home
2) /bin
3) /usr2
directory?

After selecting /bin from the list, the first statement inside the if section sets DIR_STACK to /bin followed by dirstack with everything from /bin onwards removed, i.e., /home.

The second statement then takes DIR_STACK and appends everything in dirstack following /bin (i.e., /usr2) to it. The value of DIR_STACK becomes /bin /home /usr2. The trailing space is removed in the next line.

[11] select is not available in bash versions prior to 1.14.

[12] Versions of bash prior to 1.14.3 have a serious bug with select. These versions will crash if the select list is empty. In this case, surround selects with a test for a null list.

[13] A user can also type CTRL-D (for end-of-input) to get out of a select loop. This gives the user a uniform way of exiting, but it doesn't help the shell programmer much.

while and until

The remaining two flow control constructs bash provides are while and until. These are similar; they both allow a section of code to be run repetitively while (or until) a certain condition becomes true. They also resemble analogous constructs in Pascal (while/do and repeat/until) and C (while and do/until).

while and until are actually most useful when combined with features we will see in the next chapter, such as integer arithmetic, input/output of variables, and command-line processing. Yet we can show a useful example even with what we have covered so far.

The syntax for while is:

while condition
            do
            statements...
            done

For until, just substitute until for while in the above example. As with if, the condition is really a list of statements that are run; the exit status of the last one is used as the value of the condition. You can use a conditional with test here, just as you can with if.

Note that the only difference between while and until is the way the condition is handled. In while, the loop executes as long as the condition is true; in until, it runs as long as the condition is false. The until condition is checked at the top of the loop, not at the bottom as it is in analogous constructs in C and Pascal.

The result is that you can convert any until into a while by simply negating the condition. The only place where until might be more meaningful is something like this:

until command
            ; do
            statements...
            done

The meaning of this is essentially, "Do statements until command runs correctly." This is not a likely contingency.

Here is an earlier task that can be rewritten using a while.

Task 5-6

Reimplement Task 5-2 without the use of the IFS variable.

We can use the while construct and pattern matching to traverse the PATH list:

path=$PATH:

while [ $path ]; do
    ls -ld ${path%%:*}
    path=${path#*:}
done

The first line copies PATH to a temporary copy, path, and appends a colon to it. Normally colons are used only between directories in PATH; adding one to the end makes the code simple.

Inside the while loop we display the directory with ls as we did in Task 5-2. path is then updated by removing the first directory pathname and colon (which is why we needed to append the colon in the first line of the script). The while will keep looping until $path expands to nothing (the empty string ""), which occurs once the last directory in path has been listed.

Here is another task that is a good candidate for until.

Task 5-7

Write a script that attempts to copy a file to a directory and, if it fails, waits five seconds, then tries again, continuing until it succeeds.

Here is the code:

until cp $1 $2; do
    echo 'Attempt to copy failed. waiting...'
    sleep 5
done

This is a fairly simple use of until. First, we use the cp command to perform the copy for us. If it can't perform the copy for any reason, it will return with a non-zero exit code. We set our until loop so that if the result of the copy is not 0 then the script prints a message and waits five seconds.

As we said earlier, an until loop can be converted to a while by the use of the ! operator:

while ! cp $1 $2; do
    echo 'Attempt to copy failed. waiting...'
    sleep 5
done

In our opinion, you'll seldom need to use until; therefore, we'll use while throughout the rest of this book. We'll see further use of the while construct in Chapter 7.

Chapter 6. Command-Line Options and Typed Variables

You should have a healthy grasp of shell programming techniques now that you have gone through the previous chapters. What you have learned up to this point enables you to write many non-trivial, useful shell scripts and functions.

Still, you may have noticed some remaining gaps in the knowledge you need to write shell code that behaves like the UNIX commands you are used to. In particular, if you are an experienced UNIX user, it might have occurred to you that none of the example scripts shown so far have the ability to handle options preceded by a dash (-) on the command line. And if you program in a conventional language like C or Pascal, you will have noticed that the only type of data that we have seen in shell variables is character strings; we haven't seen how to do arithmetic, for example.

These capabilities are certainly crucial to the shell's ability to function as a useful UNIX programming language. In this chapter, we will show how bash supports these and related features.

Command-Line Options

We have already seen many examples of the positional parameters (variables called 1, 2, 3, etc.) that the shell uses to store the command-line arguments to a shell script or function when it runs. We have also seen related variables like * (for the string of all arguments) and # (for the number of arguments).

Indeed, these variables hold all of the information on the user's command-line. But consider what happens when options are involved. Typical UNIX commands have the form command [-options]args, meaning that there can be 0 or more options. If a shell script processes the command teatime alice hatter, then $1 is "alice" and $2 is "hatter". But if the command is teatime -o alice hatter, then $1 is -o, $2 is "alice", and $3 is "hatter".

You might think you could write code like this to handle it:

if [ $1 = -o ]; then
    code that processes the -o option
    1=$2
    2=$3
fi

normal processing of $1 and $2...

But this code has several problems. First, assignments like 1=$2 are illegal because positional parameters are read-only. Even if they were legal, another problem is that this kind of code imposes limitations on how many arguments the script can handle—which is very unwise. Furthermore, if this command had several possible options, the code to handle all of them would get very messy very quickly.

shift

Luckily, the shell provides a way around this problem. The command shift performs the function of:

1=$2
2=$3
...

for every argument, regardless of how many there are. If you supply a numeric argument to shift, it will shift the arguments that many times over; for example, shift 3 has this effect:

1=$4
2=$5
...

This leads immediately to some code that handles a single option (call it -o) and arbitrarily many arguments:

if [ $1 = -o ]; then
    process the -o option
    shift
fi
normal processing of arguments...

After the if construct, $1, $2, etc., are set to the correct arguments.

We can use shift together with the programming features we have seen so far to implement simple option schemes. However, we will need additional help when things get more complex. The getopts built-in command, which we will introduce later, provides this help.

shift by itself gives us enough power to implement the - N option to the highest script we saw in Chapter 4 (Task 4-1). Recall that this script takes an input file that lists artists and the number of albums you have by them. It sorts the list and prints out the N highest numbers, in descending order. The code that does the actual data processing is:

filename=$1
howmany=${2:-10}
sort -nr $filename | head -$howmany

Our original syntax for calling this script was highest filename [- N ], where N defaults to 10 if omitted. Let's change this to a more conventional UNIX syntax, in which options are given before arguments: highest [- N ] filename. Here is how we would write the script with this syntax:

if [ -n "$(echo $1 | grep '^-[0-9][0-9]*$')" ]; then
    howmany=$1
    shift
elif [ -n "$(echo $1 | grep '^-')" ]; then
    print 'usage: highest [-N] filename'
    exit 1
else
    howmany="-10"
fi

filename=$1
sort -nr $filename | head $howmany

This uses the grep search utility to test if $1 matches the appropriate pattern. To do this we provide the regular expression ^-[0-9][0-9]*$ to grep, which is interpreted as "an initial dash followed by a digit, optionally followed by one or more digits." If a match is found then grep will return the match and the test will be true, otherwise grep will return nothing and processing will pass to the elif test. Notice that we have enclosed the regular expression in single quotes to stop the shell from interpreting the $ and *, and pass them through to grep unmodified.

If $1 doesn't match, we test to see if it's an option at all, i.e., if it matches the pattern - followed by anything else. If it does, then it's invalid; we print an error message and exit with error status. If we reach the final (else) case, we assume that $1 is a filename and treat it as such in the ensuing code. The rest of the script processes the data as before.

We can extend what we have learned so far to a general technique for handling multiple options. For the sake of concreteness, assume that our script is called alice and we want to handle the options -a, -b, and -c:

while [ -n "$(echo $1 | grep '-')" ]; do
    case $1 in
        -a ) process option -a
               ;;
        -b ) process option -b
               ;;
        -c ) process option -c
               ;;
        *  ) echo 'usage: alice [-a] [-b] [-c] args...'
             exit 1
    esac
    shift
done
normal processing of arguments...

This code checks $1 repeatedly as long as it starts with a dash (-). Then the case construct runs the appropriate code depending on which option $1 is. If the option is invalid—i.e., if it starts with a dash but isn't -a, -b, or -c—then the script prints a usage message and returns with an error exit status.

After each option is processed, the arguments are shifted over. The result is that the positional parameters are set to the actual arguments when the while loop finishes.

Notice that this code is capable of handling options of arbitrary length, not just one letter (e.g., -adventure instead of -a).

Options with Arguments

We need to add one more ingredient to make option processing really useful. Recall that many commands have options that take their own arguments. For example, the cut command, on which we relied heavily in Chapter 4, accepts the option -d with an argument that determines the field delimiter (if it is not the default TAB). To handle this type of option, we just use another shift when we are processing the option.

Assume that, in our alice script, the option -b requires its own argument. Here is the modified code that will process it:

while [ -n "$(echo $1 | grep '-')" ]; do
    case $1 in
        -a ) process option -a ;;
        -b ) process option -b
               $2 is the option's argument
             shift ;;
        -c ) process option -c ;;
        *  ) echo 'usage: alice [-a] [-b barg] [-c] args...'
             exit 1
    esac
    shift
done

normal processing of arguments...

getopts

So far, we have a complete, but constrained, way of handling command-line options. The above code does not allow a user to combine arguments with a single dash, e.g., -abc instead of -a -b -c. It also doesn't allow one to specify arguments to options without a space in between, e.g., -barg in addition to -b arg.[1]

The shell provides a built-in way to deal with multiple complex options without these constraints. The built-in command getopts [2] can be used as the condition of the while in an option-processing loop. Given a specification of which options are valid and which require their own arguments, it sets up the body of the loop to process each option in turn.

getopts takes two arguments. The first is a string that can contain letters and colons. Each letter is a valid option; if a letter is followed by a colon, the option requires an argument. getopts picks options off the command line and assigns each one (without the leading dash) to a variable whose name is getopts's second argument. As long as there are options left to process, getopts will return exit status 0; when the options are exhausted, it returns exit status 1, causing the while loop to exit.

getopts does a few other things that make option processing easier; we'll encounter them as we examine how to use getopts in this example:

while getopts ":ab:c" opt; do
    case $opt in
        a  ) process option -a
               ;;
        b  ) process option -b
               $OPTARG is the option's argument
               ;;
        c  ) process option -c
               ;;
        \? ) echo 'usage: alice [-a] [-b barg] [-c] args...'
             exit 1
    esac
done
shift $(($OPTIND - 1))
normal processing of arguments...

The call to getopts in the while condition sets up the loop to accept the options -a, -b, and -c, and specifies that -b takes an argument. (We will explain the : that starts the option string in a moment.) Each time the loop body is executed, it will have the latest option available, without a dash (-), in the variable opt.

If the user types an invalid option, getopts normally prints an unfortunate error message (of the form cmd: getopts: illegal option — o) and sets opt to ?. However if you begin the option letter string with a colon, getopts won't print the message.[3] We recommend that you specify the colon and provide your own error message in a case that handles ?, as above.

We have modified the code in the case construct to reflect what getopts does. But notice that there are no more shift statements inside the while loop: getopts does not rely on shifts to keep track of where it is. It is unnecessary to shift arguments over until getopts is finished, i.e., until the while loop exits.

If an option has an argument, getopts stores it in the variable OPTARG, which can be used in the code that processes the option.

The one shift statement left is after the while loop. getopts stores in the variable OPTIND the number of the next argument to be processed; in this case, that's the number of the first (non-option) command-line argument. For example, if the command line were alice -ab rabbit, then $OPTIND would be "3". If it were alice -a -b rabbit, then $OPTIND would be "4".

The expression $(($OPTIND - 1)) is an arithmetic expression (as we'll see later in this chapter) equal to $OPTIND minus 1. This value is used as the argument to shift. The result is that the correct number of arguments are shifted out of the way, leaving the "real" arguments as $1, $2, etc.

Before we continue, now is a good time to summarize everything getopts does:

Its first argument is a string containing all valid option letters. If an option requires an argument, a colon follows its letter in the string. An initial colon causes getopts not to print an error message when the user gives an invalid option.

Its second argument is the name of a variable that will hold each option letter (without any leading dash) as it is processed.

If an option takes an argument, the argument is stored in the variable OPTARG.

The variable OPTIND contains a number equal to the next command-line argument to be processed. After getopts is done, it equals the number of the first "real" argument.

The advantages of getopts are that it minimizes extra code necessary to process options and fully supports the standard UNIX option syntax (as specified in intro of the User's Manual).

As a more concrete example, let's return to our graphics utility (Task 4-2). So far, we have given our script the ability to process various types of graphics files such as PCX files (ending with .pcx), GIF files (.gif), XPM files (.xpm), etc. As a reminder, here is what we have coded in the script so far:

filename=$1

if [ -z $filename ]; then
    echo "procfile: No file specified"
    exit 1
fi

for filename in "$@"; do
    pnmfile=${filename%.*}.ppm

    case $filename in
        *.jpg ) exit 0 ;;

        *.tga ) tgatoppm $filename > $pnmfile ;;

        *.xpm ) xpmtoppm $filename > $pnmfile ;;

        *.pcx ) pcxtoppm $filename > $pnmfile ;;

        *.tif ) tifftopnm $filename > $pnmfile ;;

        *.gif ) giftopnm $filename > $pnmfile ;;

            * ) echo "procfile: $filename is an unknown graphics file."
                exit 1 ;;
    esac

    outfile=${pnmfile%.ppm}.new.jpg

    pnmtojpeg $pnmfile > $outfile
    rm $pnmfile

done

This script works quite well, in that it will convert the various different graphics files that we have lying around into JPEG files suitable for our web page. However, NetPBM has a whole range of useful utilities besides file converters that we could use on the images. It would be nice to be able to select some of them from our script.

Things we might wish to do to modify the images include changing the size and placing a border around them. We want to make the script as flexible as possible; we will want to change the size of the resulting images and we might not want a border around every one of them, so we need to be able to specify to the script what it should do. This is where the command-line option processing will come in useful.

We can change the size of an image by using the NetPBM utility pnmscale. You'll recall from the last chapter that the NetPBM package has its own format called PNM, the Portable Anymap. The fancy utilities we'll be using to change the size and add borders work on PNMs. Fortunately, our script already converts the various formats we give it into PNMs. Besides a PNM file, pnmscale also requires some arguments telling it how to scale the image.[4] There are various different ways to do this, but the one we'll choose is -xysize which takes a horizontal and a vertical size in pixels for the final image.[5]

The other utility we need is pnmmargin, which places a colored border around an image. Its arguments are the width of the border in pixels and the color of the border.

Our graphics utility will need some options to reflect the ones we have just seen. -s size will specify a size into which the final image will fit (minus any border), -w width will specify the width of the border around the image, and -c color-name will specify the color of the border.

Here is the code for the script procimage that includes the option processing:

# Set up the defaults
size=320
width=1
colour="-color black"
usage="Usage: $0 [-s N] [-w N] [-c S] imagefile..."

while getopts ":s:w:c:" opt; do
    case $opt in
      s  ) size=$OPTARG ;;
      w  ) width=$OPTARG ;;
      c  ) colour="-color $OPTARG" ;;
      \? ) echo $usage
           exit 1 ;;
    esac
done

shift $(($OPTIND - 1))

if [ -z "$@" ]; then
    echo $usage
    exit 1
fi

# Process the input files
for filename in "$*"; do
    ppmfile=${filename%.*}.ppm

    case $filename in
        *.gif ) giftopnm $filename > $ppmfile ;;

        *.tga ) tgatoppm $filename > $ppmfile ;;

        *.xpm ) xpmtoppm $filename > $ppmfile ;;

        *.pcx ) pcxtoppm $filename > $ppmfile ;;

        *.tif ) tifftopnm $filename > $ppmfile ;;

        *.jpg ) jpegtopnm -quiet $filename > $ppmfile ;;

            * ) echo "$0: Unknown filetype '${filename##*.}'"
                exit 1;;
    esac

    outfile=${ppmfile%.ppm}.new.jpg
    pnmscale -quiet -xysize $size $size $ppmfile |
        pnmmargin $colour $width |
        pnmtojpeg > $outfile

    rm $ppmfile

done

The first several lines of this script initialize variables with default settings. The defaults set the image size to 320 pixels and a black border of width 1 pixel.

The while, getopts, and case constructs process the options in the same way as in the previous example. The code for the first three options assigns the respective argument to a variable (replacing the default value). The last option is a catchall for any invalid options.

The rest of the code works in much the same way as in the previous example except we have added the pnmscale and pnmmargin utilities in a processing pipeline at the end.

The script also now generates a different filename; it appends .new.jpg to the basename. This allows us to process a JPEG file as input, applying scaling and borders, and write it out without destroying the original file.

This version doesn't address every issue, e.g., what if we don't want any scaling to be performed? We'll return to this script and develop it further in the next chapter.

[1] Although most UNIX commands allow this, it is actually contrary to the Command Syntax Standard Rules in intro of the User's Manual.

[2] getopts replaces the external command getopt, used in Bourne shell programming; getopts is better integrated into the shell's syntax and runs more efficiently. C programmers will recognize getopts as very similar to the standard library routine getopt.

[3] You can also turn off the getopts messages by setting the environment variable OPTERR to 0. We will continue to use the colon method in this book.

[4] We'll also need the -quiet option, which suppresses diagnostic output from some NetPBM utilities.

[5] Actually, -xysize fits the image into a box defined by its arguments without changing the aspect ratio of the image, i.e., without stretching the image horizontally or vertically. For example, if you had an image of size 200 by 100 pixels and you processed it with pnmscale -xysize 100 100, you'd end up with an image of size 100 by 50 pixels.

Typed Variables

So far we've seen how bash variables can be assigned textual values. Variables can also have other attributes, including being read only and being of type integer.

You can set variable attributes with the declare built-in. [6] Table 6-1 summarizes the available options with declare.[7] A - turns the option on, while + turns it off.

Table 6-1. Declare options

Option

Meaning

-a

The variables are treated as arrays

-f

Use function names only

-F

Display function names without definitions

-i

The variables are treated as integers

-r

Makes the variables read-only

-x

Marks the variables for export via the environment

Typing declare on its own displays the values of all variables in the environment. The -f option limits this display to the function names and definitions currently in the environment. -F limits it further by displaying only the function names.

The -a option declares arrays—a variable type that we haven't seen yet, but will be discussed shortly.

The -i option is used to create an integer variable, one that holds numeric values and can be used in and modified by arithmetic operations. Consider this example:

$ val1=12 val2=5
$ result1=val*val2
$ echo $result1
val1*val2
$
$ declare -i val3=12 val4=5
$ declare -i result2
$ result2=val3*val4
$ echo $result2
60

In the first example, the variables are ordinary shell variables and the result is just the string "val1*val2". In the second example, all of the variables have been declared as type integer. The variable result contains the result of the arithmetic computation twelve multiplied by five. Actually, we didn't need to declare val3 and val4 as type integer. Anything being assigned to result2 is interpreted as an arithmetic statement and evaluation is attempted.

The -x option to declare operates in the same way as the export built-in that we saw in Chapter 3. It allows the listed variables to be exported outside the current shell environment.

The -r option creates a read-only variable, one that cannot have its value changed by subsequent assignment statements and cannot be unset.

A related built-in is readonly name ... which operates in exactly the same way as declare -r. readonly has three options: -f, which makes readonly interpret the name arguments as function names rather than variable names, -p, which makes the built-in print a list of all read-only names, and -a, which interprets the name arguments as arrays.

Lastly, variables declared in a function are local to that function, just like using local to declare them.

[6] The typeset built-in is synonymous with declare but is considered obsolete.

[7] The -a and -F options are not available in bash prior to version 2.0.

Integer Variables and Arithmetic

The expression $(($OPTIND - 1)) in the last graphics utility example shows another way that the shell can do integer arithmetic. As you might guess, the shell interprets words surrounded by $(( and )) as arithmetic expressions.[8] Variables in arithmetic expressions do not need to be preceded by dollar signs, though it is not wrong to do so.

Arithmetic expressions are evaluated inside double quotes, like tildes, variables, and command substitutions. We're finally in a position to state the definitive rule about quoting strings: when in doubt, enclose a string in single quotes, unless it contains tildes or any expression involving a dollar sign, in which case you should use double quotes.

For example, the date command on modern versions of UNIX accepts arguments that tell it how to format its output. The argument +%j tells it to print the day of the year, i.e., the number of days since December 31st of the previous year.

We can use +%j to print a little holiday anticipation message:

echo "Only $(( (365-$(date +%j)) / 7 )) weeks until the New Year"

We'll show where this fits in the overall scheme of command-line processing in Chapter 7.

The arithmetic expression feature is built into bash's syntax, and was available in the Bourne shell (most versions) only through the external command expr. Thus it is yet another example of a desirable feature provided by an external command being better integrated into the shell. getopts, as we have already seen, is another example of this design trend.

bash arithmetic expressions are equivalent to their counterparts in the Java and C languages.[9] Precedence and associativity are the same as in C. Table 6-2 shows the arithmetic operators that are supported. Although some of these are (or contain) special characters, there is no need to backslash-escape them, because they are within the $((...)) syntax.

Table 6-2. Arithmetic operators

Operator

Meaning

++

Increment by one (prefix and postfix)

—

Decrement by one (prefix and postfix)

+

Plus

-

Minus

*

Multiplication

/

Division (with truncation)

%

Remainder

**

Exponentiation[10]

<<

Bit-shift left

>>

Bit-shift right

&

Bitwise and

|

Bitwise or

~

Bitwise not

!

Logical not

^

Bitwise exclusive or

,

Sequential evaluation

[10] Note that ** is not in the C language.

The ++ and - operators are useful when you want to increment or decrement a value by one.[11] They work the same as in Java and C, e.g., value++ increments value by 1. This is called post-increment; there is also a pre-increment: ++value. The difference becomes evident with an example:

$ i=0
$ echo $i
0
$ echo $((i++))
0
$ echo $i
1
$ echo $((++i))
2
$ echo $i
2

In both cases the value has been incremented by one. However, in the first case (post-increment) the value of the variable was passed to echo and then the variable was incremented. In the second case (pre-increment) the increment was performed and then the variable passed to echo.

Parentheses can be used to group subexpressions. The arithmetic expression syntax also (as in C) supports relational operators as "truth values" of 1 for true and 0 for false. Table 6-3 shows the relational operators and the logical operators that can be used to combine relational expressions.

Table 6-3. Relational operators

Operator

Meaning

<

Less than

>

Greater than

<=

Less than or equal to

>=

Greater than or equal to

==

Equal to

!=

Not equal to

&&

Logical and

||

Logical or

For example, $((3 > 2)) has the value 1; $(( (3 > 2) || (4 <= 1) )) also has the value 1, since at least one of the two subexpressions is true.

The shell also supports base N numbers, where N can be from 2 to 36. The notation B # N means "N base B". Of course, if you omit the B #, the base defaults to 10.

Arithmetic Conditionals

In Chapter 5, we saw how to compare strings by the use of [...] notation (or with the test built-in). Arithmetic conditions can also be tested in this way. However, the tests have to be carried out with their own operators. These are shown in Table 6-4.

Table 6-4. Test relational operators

Operator

Meaning

-lt

Less than

-gt

Greater than

-le

Less than or equal to

-ge

Greater than or equal to

-eq

Equal to

-ne

Not equal to

And as with string comparisons, the arithmetic test returns a result of true or false; 0 if true, 1 otherwise. So, for example, [ 3 -gt 2 ] produces exit status 0, as does [ \( 3 -gt 2 \) || \( 4 -le 1 \) ], but [ \( 3 -gt 2 \) && \( 4 -le 1 \) ] has exit status 1 since the second subexpression isn't true.

In these examples we have had to escape the parentheses and pass them to test as separate arguments. As you can see, the result can look rather unreadable if there are many parentheses.

Another way to make arithmetic tests is to use the $((...)) form to encapsulate the condition. For example: [ $(((3 > 2) && (4 <= 1))) = 1 ]. This evaluates the conditionals and then compares the resulting value to 1 (true).[12]

There is an even neater and more efficient way of performing an arithmetic test: by using the ((...)) construct.[13] This returns an exit status of 0 if the expression is true, and 1 otherwise.

The above expression using this construct becomes (( (3 > 2) && (4 <= 1) )). This example returns with an exit status of 1 because, as we said, the second subexpression is false.

Arithmetic Variables and Assignment

As we saw earlier, you can define integer variables by using declare. You can also evaluate arithmetic expressions and assign them to variables with the use of let. The syntax is:

let intvar=expression

It is not necessary (because it's actually redundant) to surround the expression with $(( and )) in a let statement. let doesn't create a variable of type integer; it only causes the expression following the assignment to be interpreted as an arithmetic one. As with any variable assignment, there must not be any space on either side of the equal sign (=). It is good practice to surround expressions with quotes, since many characters are treated as special by the shell (e.g., *, #, and parentheses); furthermore, you must quote expressions that include whitespace (spaces or TABs). See Table 6-5 for examples.

Table 6-5. Sample integer expression assignments

Assignment

Value

let x=

$x

1+4

5

`1 + 4'

5

`(2+3) * 5'

25

`2 + 3 * 5'

17

`17 / 3'

5

`17 % 3'

2

`1<<4'

16

`48>>3'

6

`17 & 3'

1

`17 | 3'

19

`17 ^ 3'

18

Task 6-1

Here is a small task that makes use of integer arithmetic. Write a script called ndu that prints a summary of the disk space usage for each directory argument (and any subdirectories), both in terms of bytes, and kilobytes or megabytes (whichever is appropriate).

Here is the code:

for dir in ${*:-.}; do
    if [ -e $dir ]; then
        result=$(du -s $dir | cut -f 1)
        let total=$result*1024

        echo -n "Total for $dir = $total bytes"

        if [ $total -ge 1048576 ]; then
              echo " ($((total/1048576)) Mb)"
        elif [ $total -ge 1024 ]; then
              echo " ($((total/1024)) Kb)"
        fi
    fi
done

To obtain the disk usage of files and directories, we can use the UNIX utility du. The default output of du is a list of directories with the amount of space each one uses, and looks something like this:

6       ./toc
3       ./figlist
6       ./tablist
1       ./exlist
1       ./index/idx
22      ./index
39      .

If you don't specify a directory to du, it will use the current directory (.). Each directory and subdirectory is listed along with the amount of space it uses. The grand total is given in the last line.

The amount of space used by each directory and all the files in it is listed in terms of blocks. Depending on the UNIX system you are running on, one block can represent 512 or 1024 bytes. Each file and directory uses at least one block. Even if a file or directory is empty, it is still allocated a block of space in the filesystem.

In our case, we are only interested in the total usage, given on the last line of du's output. To obtain only this line, we can use the -s option of du. Once we have the line, we want only the number of blocks and can throw away the directory name. For this we use our old friend cut to extract the first field.

Once we have the total, we can multiply it by the number of bytes in a block (1024 in this case) and print the result in terms of bytes. We then test to see if the total is greater than the number of bytes in one megabyte (1048576 bytes, which is 1024 x 1024) and if it is, we can print how many megabytes it is by dividing the total by this large number. If not, we see if it can be expressed in kilobytes, otherwise nothing is printed.

We need to make sure that any specified directories exist, otherwise du will print an error message and the script will fail. We do this by using the test for file or directory existence (-e) that we saw in Chapter 5 before calling du.

To round out this script, it would be nice to imitate du as closely as possible by providing for multiple arguments. To do this, we wrap the code in a for loop. Notice how parameter substitution has been used to specify the current directory if no arguments are given.

As a bigger example of integer arithmetic, we will complete our emulation of the pushd and popd functions (Task 4-8). Remember that these functions operate on DIR_STACK, a stack of directories represented as a string with the directory names separated by spaces. bash's pushd and popd take additional types of arguments, which are:

pushd +n takes the nth directory in the stack (starting with 0), rotates it to the top, and cds to it.

pushd without arguments, instead of complaining, swaps the two top directories on the stack and cds to the new top.

popd +n takes the nth directory in the stack and just deletes it.

The most useful of these features is the ability to get at the nth directory in the stack. Here are the latest versions of both functions:

.ps 8
pushd ( )
{
    dirname=$1   if [ -n $dirname ] && [ \( -d $dirname \) -a
           \( -x $dirname \) ]; then
        DIR_STACK="$dirname ${DIR_STACK:-$PWD' '}"
        cd $dirname
        echo "$DIR_STACK"
    else
        echo "still in $PWD."
    fi
}

popd ( )
{
    if [ -n "$DIR_STACK" ]; then
        DIR_STACK=${DIR_STACK#* }

        cd ${DIR_STACK%% *}
        echo "$PWD"
    else
        echo "stack empty, still in $PWD."
    fi
}

To get at the nth directory, we use a while loop that transfers the top directory to a temporary copy of the stack n times. We'll put the loop into a function called getNdirs that looks like this:

getNdirs ( )
{
    stackfront=''
    let count=0
    while [ $count -le $1 ]; do
        target=${DIR_STACK%${DIR_STACK#* }}
        stackfront="$stackfront$target"
        DIR_STACK=${DIR_STACK#$target}
        let count=count+1
    done

    stackfront=${stackfront%$target}
}

The argument passed to getNdirs is the n in question. The variable target contains the directory currently being moved from DIR_STACK to a temporary stack, stackfront. target will contain the nth directory and stackfront will have all of the directories above (and including) target when the loop finishes. stackfront starts as null; count, which counts the number of loop iterations, starts as 0.

The first line of the loop body copies the first directory on the stack to target. The next line appends target to stackfront and the following line removes target from the stack ${DIR_STACK#$target}. The last line increments the counter for the next iteration. The entire loop executes n+1 times, for values of count from 0 to N.

When the loop finishes, the directory in $target is the nth directory. The expression ${stackfront%$target} removes this directory from stackfront so that stackfront will contain the first n-1 directories. Furthermore, DIR_STACK now contains the "back" of the stack, i.e., the stack without the first n directories. With this in mind, we can now write the code for the improved versions of pushd and popd:

pushd ( )
{
    if [ $(echo $1 | grep '^+[0-9][0-9]*$') ]; then

        # case of pushd +n: rotate n-th directory to top
        let num=${1#+}
        getNdirs $num

        DIR_STACK="$target$stackfront$DIR_STACK"
        cd $target
        echo "$DIR_STACK"

    elif [ -z "$1" ]; then
        # case of pushd without args; swap top two directories
        firstdir=${DIR_STACK%% *}
        DIR_STACK=${DIR_STACK#* }
        seconddir=${DIR_STACK%% *}
        DIR_STACK=${DIR_STACK#* }
        DIR_STACK="$seconddir $firstdir $DIR_STACK"
        cd $seconddir

    else
        # normal case of pushd dirname
        dirname=$1
        if [ \( -d $dirname \) -a \( -x $dirname \) ]; then
            DIR_STACK="$dirname ${DIR_STACK:-$PWD" "}"
            cd $dirname
            echo "$DIR_STACK"
        else
            echo still in "$PWD."
        fi
    fi
}

popd ( )
{
    if [ $(echo $1 | grep '^+[0-9][0-9]*$') ]; then

        # case of popd +n: delete n-th directory from stack
        let num=${1#+}
        getNdirs $num
        DIR_STACK="$stackfront$DIR_STACK"
        cd ${DIR_STACK%% *}
        echo "$PWD"

    else

        # normal case of popd without argument
        if [ -n "$DIR_STACK" ]; then
            DIR_STACK=${DIR_STACK#* }
            cd ${DIR_STACK%% *}
            echo "$PWD"
        else
            echo "stack empty, still in $PWD."
        fi
    fi
}

These functions have grown rather large; let's look at them in turn. The if at the beginning of pushd checks if the first argument is an option of the form + N. If so, the first body of code is run. The first let simply strips the plus sign (+) from the argument and assigns the result—as an integer—to the variable num. This, in turn, is passed to the getNdirs function.

The next assignment statement sets DIR_STACK to the new ordering of the list. Then the function cds to the new directory and prints the current directory stack.

The elif clause tests for no argument, in which case pushd should swap the top two directories on the stack. The first four lines of this clause assign the top two directories to firstdir and seconddir, and delete these from the stack. Then, as above, the code puts the stack back together in the new order and cds to the new top directory.

The else clause corresponds to the usual case, where the user supplies a directory name as argument.

popd works similarly. The if clause checks for the + N option, which in this case means "delete the nth directory." A let extracts the N as an integer; the getNdirs function puts the first n directories into stackfront. Finally, the stack is put back together with the nth directory missing, and a cd is performed in case the deleted directory was the first in the list.

The else clause covers the usual case, where the user doesn't supply an argument.

Before we leave this subject, here are a few exercises that should test your understanding of this code:

Implement bash's dirs command and the options +n and -l. dirs by itself displays the list of currently remembered directories (those in the stack). The +n option prints out the nth directory (starting at 0) and the -l option produces a long listing; any tildes (~) are replaced by the full pathname.

Modify the getNdirs function so that it checks for N exceeding the number of directories in the stack and exits with an appropriate error message if true.

Modify pushd, popd, and getNdirs so that they use variables of type integer in the arithmetic expressions.

Change getNdirs so that it uses cut (with command substitution), instead of the while loop, to extract the first N directories. This uses less code but runs more slowly because of the extra processes generated.

bash's versions of pushd and popd also have a -N option. In both cases -N causes the nth directory from the right-hand side of the list to have the operation performed on it. As with +N, it starts at 0. Add this functionality.

Use getNdirs to reimplement the selectd function from the last chapter.

Arithmetic for Loops

Chapter 5 introduced the for loop and briefly mentioned another type of for loop, more akin to the construct found in many programming languages like Java and C. This type of for loop is called an arithmetic for loop.[14]

The form of an arithmetic for loop is very similar to those found in Java and C:

for (( initialisation ; ending condition ; update ))
do
        statements...
done

There are four sections to the loop, the first three being arithmetic expressions and the last being a set of statements just as in the standard loop that we saw in the last chapter.

The first expression, initialisation, is something that is done once at the start of the loop and if it evaluates to true the loop continues its process; otherwise, it skips the loop and continues with the next statement. When initialisation is true the loop then evaluates ending condition. If this is true then it executes statements, evaluates update and repeats the cycle again by evaluation ending condition. The loop continues until ending condition becomes false or the loop is exited via one of the statements.

Usually initialisation is used to set an arithmetic variable to some initial value, update updates that variable, and ending condition tests the variable. Any of the values may be left out in which case they automatically evaluate to true. The following simple example:

for ((;;))
do
        read var
        if [ "$var" = "." ]; then
                break
        fi
done

loops forever reading lines until a line consisting of a . is found. We'll look at using the expressions in an arithmetic for loop in our next task.

Task 6-2

Write a script that uses for loops to print out a multiplication table for the numbers 1 to 12.

This task is best accomplished using nested for loops:

for (( i=1; i <= 12 ; i++ ))
do
        for (( j=1 ; j <= 12 ; j++ ))
        do
                echo -ne "$(( j * i ))\t"
        done

        echo
done

The script begins with a for loop using a variable i; the initialisation clause sets i to 1, the ending condition clause tests i against the limit (12 in our case), and the update clause adds 1 to i each time around the loop. The body of the loop is another for loop, this time with a variable called j. This is identical to the i for loop except that j is being updated.

The body of the j loop has an echo statement where the two variables are multiplied together and printed along with a trailing tab. We deliberately don't print a newline (with the -n option to echo) so that the numbers appear on one line. Once the inner loop has finished a newline is printed so that the set of numbers starts on the next line.

Arithmetic for loops are useful when dealing with arrays, which we'll now look at.

[8] You can also use the older form $[...], but we don't recommend this because it will be phased out in future versions of bash.

[9] The assignment forms of these operators are also permitted. For example, $((x += 2)) adds 2 to x and stores the result back in x.

[11] ++ and - are not available in versions of bash prior to 2.04.

[12] Note that the truth values returned by $((...)) are 1 for true, 0 for false—the reverse of the test and exit statuses.

[13] ((...)) is not available in versions of bash prior to 2.0.

[14] Versions of bash prior to 2.04 do not have this type of loop.

Arrays

The pushd and popd functions use a string variable to hold a list of directories and manipulate the list with the string pattern-matching operators. Although this is quite efficient for adding or retrieving items at the beginning or end of the string, it becomes cumbersome when attempting to access items that are anywhere else, e.g., obtaining item N with the getNdirs function. It would be nice to be able to specify the number, or index, of the item and retrieve it. Arrays allow us to do this.[15]

An array is like a series of slots that hold values. Each slot is known as an element, and each element can be accessed via a numerical index. An array element can contain a string or a number, and you can use it just like any other variable. The indices for arrays start at 0 and continue up to a very large number.[16] So, for example, the fifth element of array names would be names[4]. Indices can be any valid arithmetic expression that evaluates to a number greater than or equal to 0.

There are several ways to assign values to arrays. The most straightforward way is with an assignment, just like any other variable:

names[2]=alice
names[0]=hatter
names[1]=duchess

This assigns hatter to element 0, duchess to element 1, and alice to element 2 of the array names.

Another way to assign values is with a compound assignment:

names=([2]=alice [0]=hatter [1]=duchess)

This is equivalent to the first example and is convenient for initializing an array with a set of values. Notice that we didn't have to specify the indices in numerical order. In fact, we don't even have to supply the indices if we reorder our values slightly:

names=(hatter duchess alice)

bash automatically assigns the values to consecutive elements starting at 0. If we provide an index at some point in the compound assignment, the values get assigned consecutively from that point on, so:

names=(hatter [5]=duchess alice)

assigns hatter to element 0, duchess to element 5, and alice to element 6.

An array is created automatically by any assignment of these forms. To explicitly create an empty array, you can use the -a option to declare. Any attributes that you set for the array with declare (e.g., the read-only attribute) apply to the entire array. For example, the statement declare -ar names would create a read-only array called names. Every element of the array would be read-only.

An element in an array may be referenced with the syntax ${ array[i]}. So, from our last example above, the statement echo ${names[5]} would print the string "duchess". If no index is supplied, array element 0 is assumed.

You can also use the special indices @ and *. These return all of the values in the array and work in the same way as for the positional parameters; when the array reference is within double quotes, using * expands the reference to one word consisting of all the values in the array separated by the first character of the IFS variable, while @ expands the values in the array to separate words. When unquoted, both of them expand the values of the array to separate words. Just as with positional parameters, this is useful for iterating through the values with a for loop:

for i in "${names[@]}"; do
    echo $i
done

Any array elements which are unassigned don't exist; they default to null strings if you explicitly reference them. Therefore, the previous looping example will print out only the assigned elements in the array names. If there were three values at indexes 1, 45, and 1005, only those three values would be printed.

If you want to know what indices currently have values in an array then you can use ${!array[@]}. In the last example this would return 1 45 1005.[17]

A useful operator that you can use with arrays is #, the length operator that we saw in Chapter 4. To find out the length of any element in the array, you can use ${#array[i]}. Similarly, to find out how many values there are in the array, use * or @ as the index. So, for names=(hatter [5]=duchess alice), ${#names[5]} has the value 7, and ${#names[@]} has the value 3.

Reassigning to an existing array with a compound array statement replaces the old array with the new one. All of the old values are lost, even if they were at different indices to the new elements. For example, if we reassigned names to be ([100]=tweedledee tweedledum), the values hatter, duchess, and alice would disappear.

You can destroy any element or the entire array by using the unset built-in. If you specify an index, that particular element will be unset. unset names[100], for instance, would remove the value at index 100; tweedledee in the example above. However, unlike assignment, if you don't specify an index the entire array is unset, not just element 0. You can explicitly specify unsetting the entire array by using * or @ as the index.

Let's now look at a simple example that uses arrays to match user IDs to account names on the system. The code takes a user ID as an argument and prints the name of the account plus the number of accounts currently on the system:

for i in $(cut -f 1,3 -d: /etc/passwd) ; do
   array[${i#*:}]=${i%:*}
done

echo "User ID $1 is ${array[$1]}."
echo "There are currently ${#array[@]} user accounts on the system."

We use cut to create a list from fields 1 and 3 in the /etc/passwd file. Field 1 is the account name and field 3 is the user ID for the account. The script loops through this list using the user ID as an index for each array element and assigns each account name to that element. The script then uses the supplied argument as an index into the array, prints out the value at that index, and prints the number of existing array values.

We'll now look at combining our knowledge of arrays with arithmetic for loops in the next task:

Task 6-3

Write a selection sort script that takes numbers in an array and sorts them.

Selection sort is a common algorithm for quickly sorting a set of elements. While it isn't the quickest sorting algorithm available, it is easy to understand and implement.

It works by selecting the smallest element in the set and moving it to the head of the set. It then repeats the process for the remainder of the set until the end of the set is reached.

For example, to sort the set 21543 it would start at 2 and then move down the set. 1 is less than 2 (and the other elements) so 1 is moved to the start: 12543. Then looking at 2 and moving down the list it finds nothing less than 2 so it moves to the next element, 5. Moving down the list 4 is less than 5, but 3 is less than 4, so 3 is moved: 12354. The next element is 5, and 4 is less than this so 4 is moved: 12345. Five is the last element so the sort is finished.

The code for this is as follows:

values=(39 5 36 12 9 3 2 30 4 18 22 1 28 25)
numvalues=${#values[@]}

for (( i=0; i < numvalues; i++ )); do
  lowest=$i

  for (( j=i; j < numvalues; j++ )); do
    if [ ${values[j]} -le ${values[$lowest]}; then
      lowest=$j
    fi
  done

  temp=${values[i]}
  values[i]=${values[lowest]}
  values[lowest]=$temp
done

for (( i=0; i < numvalues; i++ )); do
  echo -ne "${values[$i]}\t"
done

echo

At the start of the script we set up an array of randomly ordered values and a variable to hold the number of array elements as a convenience.

The outer i for loop is for looping over the entire array and pointing to the current "head" (where we put any value we need to swap). The variable lowest is set to this index.

The inner j loop is for looping over the remainder of the array. It compares the remaining elements with the value at lowest; if a value is less then lowest is set to the index of that element.

Once the inner loop is finished the values of the "head" (i) element and lowest are swapped by using a temporary variable temp.

On completing the outer loop, the script prints out the sorted array elements.

Note that some of the environment variables in bash are arrays; DIRSTACK functions as a stack for the pushd and popd built-ins, BASH_VERSINFO is an array of version information for the current instance of the shell, and PIPESTATUS is an array of exit status values for the last foreground pipe that was executed.

We'll see a further use of arrays when we build a bash debugger in Chapter 9.

To end this chapter, here are some problems relating to what we've just covered:

Improve the account ID script so that it checks whether the argument is a number. Also, add a test to print an appropriate message if the user ID doesn't exist.

Make the script print out the username (field 5) as well. Hint: this isn't as easy as it sounds. A username can have spaces in it, causing the for loop to iterate on each part of the name.

As mentioned earlier, the built-in versions of pushd and popd use an array to implement the stack. Change the pushd, popd, and getNdirs code that we developed in this chapter so that it uses arrays.

Change the selection sort in the last task into a bubble sort. A bubble sort works by iterating over the list comparing pairs of elements and swapping them if they are in incorrect order. It then repeats the process from the start of the list and continues until the list is traversed with no swaps.

[15] Support for arrays is not available in versions of bash prior to 2.0.

[16] Actually, up to 599147937791. That's almost six hundred billion, so yes, it's pretty large.

[17] This is not available in versions of bash prior to 3.0.

Chapter 7. Input/Output and Command-Line Processing

The past few chapters have gone into detail about various shell programming techniques, mostly focused on the flow of data and control through shell programs. In this chapter, we switch the focus to two related topics. The first is the shell's mechanisms for doing file-oriented input and output. We present information that expands on what you already know about the shell's basic I/O redirectors.

Second, we'll "zoom in" and talk about I/O at the line and word level. This is a fundamentally different topic, since it involves moving information between the domains of files/terminals and shell variables. echo and command substitution are two ways of doing this that we've seen so far.

Our discussion of line and word I/O will lead into a more detailed explanation of how the shell processes command lines. This information is necessary so that you can understand exactly how the shell deals with quotation, and so that you can appreciate the power of an advanced command called eval, which we will cover at the end of the chapter.

I/O Redirectors

In Chapter 1, you learned about the shell's basic I/O redirectors: >, <, and |. Although these are enough to get you through 95% of your UNIX life, you should know that bash supports many other redirectors. Table 7-1 lists them, including the three we've already seen. Although some of the rest are broadly useful, others are mainly for systems programmers.

Table 7-1. I/O redirectors

Redirector

Function

cmd1 | cmd2

Pipe; take standard output of cmd1 as standard input to cmd2.

> file

Direct standard output to file.

< file

Take standard input from file.

>> file

Direct standard output to file; append to file if it already exists.

>| file

Force standard output to file even if noclobber is set.

n>| file

Force output to file from file descriptor n even if noclobber is set.

<> file

Use file as both standard input and standard output.

n<> file

Use file as both input and output for file descriptor n.

<< label

Here-document; see text.

n > file

Direct file descriptor n to file.

n < file

Take file descriptor n from file.

n >> file

Direct file descriptor n to file; append to file if it already exists.

n>&

Duplicate standard output to file descriptor n.

n<&

Duplicate standard input from file descriptor n.

n>&m

File descriptor n is made to be a copy of the output file descriptor.

n<&m

File descriptor n is made to be a copy of the input file descriptor.

&>file

Directs standard output and standard error to file.

<&-

Close the standard input.

>&-

Close the standard output.

n>&-

Close the output from file descriptor n.

n<&-

Close the input from file descriptor n.

n>&word

If n is not specified, the standard output (file descriptor 1) is used. If the digits in word do not specify a file descriptor open for output, a redirection error occurs. As a special case, if n is omitted, and word does not expand to one or more digits, the standard output and standard error are redirected as described previously.

n<&word

If word expands to one or more digits, the file descriptor denoted by n is made to be a copy of that file descriptor. If the digits in word do not specify a file descriptor open for input, a redirection error occurs. If word evaluates to -, file descriptor n is closed. If n is not specified, the standard input (file descriptor 0) is used.

n>&digit-

Moves the file descriptor digit to file descriptor n, or the standard output (file descriptor 1) if n is not specified.

n<&digit-

Moves the file descriptor digit to file descriptor n, or the standard input (file descriptor 0) if n is not specified. digit is closed after being duplicated to n.

Notice that some of the redirectors in Table 7-1 contain a digit n, and that their descriptions contain the term file descriptor; we'll cover that in a little while.

The first two new redirectors, >> and >|, are simple variations on the standard output redirector >. The >> appends to the output file (instead of overwriting it) if it already exists; otherwise it acts exactly like >. A common use of >> is for adding a line to an initialization file (such as .bashrc or .mailrc) when you don't want to bother with a text editor. For example:

$ cat >> .bashrc
  alias cdmnt='mount -t iso9660 /dev/sbpcd /cdrom'
  ^D

As we saw in Chapter 1, cat without an argument uses standard input as its input. This allows you to type the input and end it with CTRL-D on its own line. The alias line will be appended to the file .bashrc if it already exists; if it doesn't, the file is created with that one line.

Recall from Chapter 3, that you can prevent the shell from overwriting a file with > file by typing set -o noclobber. >| overrides noclobber—it's the "Do it anyway, dammit!" redirector.

The redirector <> is mainly meant for use with device files (in the /dev directory), i.e., files that correspond to hardware devices such as terminals and communication lines. Low-level systems programmers can use it to test device drivers; otherwise, it's not very useful.

The rest of the redirectors will only be useful in special situations and you are unlikely to need them most of the time.

Here-documents

The << label redirector essentially forces the input to a command to be the shell's standard input, which is read until there is a line that contains only label. The input in between is called a here-document. Here-documents aren't very interesting when used from the command prompt. In fact, it's the same as the normal use of standard input except for the label. We could use a here-document to simulate the mail facility. When you send a message to someone with the mail utility, you end the message with a dot (.). The body of the message is saved in a file, msgfile:

$ cat >> msgfile << .
  > this is the text of
  > our message.
  > .

Here-documents are meant to be used from within shell scripts; they let you specify "batch" input to programs. A common use of here-documents is with simple text editors like ed. Task 7-1 is a programming task that uses a here-document in this way.

Task 7-1

The s file command in mail saves the current message in file. If the message came over a network (such as the Internet), then it has several header lines prepended that give information about network routing. Write a shell script that deletes the header lines from the file.

We can use ed to delete the header lines. To do this, we need to know something about the syntax of mail messages; specifically, that there is always a blank line between the header lines and the message text. The ed command 1,/^[]*$/d does the trick: it means, "Delete from line 1 until the first blank line." We also need the ed commands w (write the changed file) and q (quit). Here is the code that solves the task:

ed $1 << EOF
1,/^[ ]*$/d
w
q
EOF

The shell does parameter (variable) substitution and command substitution on text in a here-document, meaning that you can use shell variables and commands to customize the text. A good example of this is the bashbug script, which sends a bug report to the bash maintainer (see Chapter 11). Here is a stripped-down version:

MACHINE="i586"
OS="linux-gnu"
CC="gcc"
CFLAGS=" -DPROGRAM='bash' -DHOSTTYPE='i586' -DOSTYPE='linux-gnu' \
    -DMACHTYPE='i586-pc-linux-gnu' -DSHELL -DHAVE_CONFIG_H   -I. \
    -I. -I./lib -g -O2"
RELEASE="2.01"
PATCHLEVEL="0"
RELSTATUS="release"
MACHTYPE="i586-pc-linux-gnu"

TEMP=/tmp/bbug.$$

case "$RELSTATUS" in
alpha*|beta*)   BUGBASH=chet@po.cwru.edu ;;
*)              BUGBASH=bug-bash@prep.ai.mit.edu ;;
esac

BUGADDR="${1-$BUGBASH}"

UN=
if (uname) >/dev/null 2>&1; then
        UN=`uname -a`
fi

cat > $TEMP <<EOF
From: ${USER}
To: ${BUGADDR}
Subject: [50 character or so descriptive subject here (for reference)]

Configuration Information [Automatically generated, do not change]:
Machine: $MACHINE
OS: $OS
Compiler: $CC
Compilation CFLAGS: $CFLAGS
uname output: $UN
Machine Type: $MACHTYPE

bash Version: $RELEASE
Patch Level: $PATCHLEVEL
Release Status: $RELSTATUS

Description:
        [Detailed description of the problem, suggestion, or complaint.]

Repeat-By:
        [Describe the sequence of events that causes the problem
        to occur.]

Fix:
        [Description of how to fix the problem.  If you don't know a
        fix for the problem, don't include this section.]
EOF

vi $TEMP

mail $BUGADDR < $TEMP

The first eight lines are generated when bashbug is installed. The shell will then substitute the appropriate values for the variables in the text whenever the script is run.

The redirector << has two variations. First, you can prevent the shell from doing parameter and command substitution by surrounding the label in single or double quotes. In the above example, if you used the line cat > $TEMP <<`EOF', then text like $USER and $MACHINE would remain untouched (defeating the purpose of this particular script).

The second variation is <<-, which deletes leading TABs (but not blanks) from the here-document and the label line. This allows you to indent the here-document's text, making the shell script more readable:

cat > $TEMP <<-EOF
        From: ${USER}
        To: ${BUGADDR}
        Subject: [50 character or so descriptive subject here]

        Configuration Information [Automatically generated,
            do not change]:
        Machine: $MACHINE
        OS: $OS
        Compiler: $CC
        Compilation CFLAGS: $CFLAGS
        ...
EOF

Make sure you are careful when choosing your label so that it doesn't appear as an actual input line.

A slight variation on this is provided by the here string. It takes the form <<<word; the word is expanded and supplied on the standard input.

File Descriptors

The next few redirectors in Table 7-1 depend on the notion of a file descriptor. Like the device files used with <>, this is a low-level UNIX I/O concept that is of interest only to systems programmers—and then only occasionally. You can get by with a few basic facts about them; for the whole story, look at the entries for read( ), write( ), fcntl( ), and others in Section 2 of the UNIX manual. You might wish to refer to UNIX Power Tools by Shelley Powers, Jerry Peek, Tim O'Reilly, and Mike Loukides (O'Reilly).

File descriptors are integers starting at 0 that refer to particular streams of data associated with a process. When a process starts, it usually has three file descriptors open. These correspond to the three standards: standard input (file descriptor 0), standard output (1), and standard error (2). If a process opens additional files for input or output, they are assigned to the next available file descriptors, starting with 3.

By far the most common use of file descriptors with bash is in saving standard error in a file. For example, if you want to save the error messages from a long job in a file so that they don't scroll off the screen, append 2> file to your command. If you also want to save standard output, append > file1 2> file2.

This leads to another programming task.

Task 7-2

You want to start a long job in the background (so that your terminal is freed up) and save both standard output and standard error in a single log file. Write a script that does this.

We'll call this script start. The code is very terse:

"$@" > logfile 2>&1 &

This line executes whatever command and parameters follow start. (The command cannot contain pipes or output redirectors.) It sends the command's standard output to logfile.

Then, the redirector 2>&1 says, "send standard error (file descriptor 2) to the same place as standard output (file descriptor 1)." Since standard output is redirected to logfile, standard error will go there too. The final & puts the job in the background so that you get your shell prompt back.

As a small variation on this theme, we can send both standard output and standard error into a pipe instead of a file: command 2>&1 | ... does this. (Make sure you understand why.) Here is a script that sends both standard output and standard error to the logfile (as above) and to the terminal:

"$@" 2>&1 | tee logfile &

The command tee takes its standard input and copies it to standard output and the file given as argument.

These scripts have one shortcoming: you must remain logged in until the job completes. Although you can always type jobs (see Chapter 1) to check on progress, you can't leave your terminal until the job finishes, unless you want to risk a breach of security.[1] We'll see how to solve this problem in the next chapter.

The other file-descriptor-oriented redirectors (e.g., <& n) are usually used for reading input from (or writing output to) more than one file at the same time. We'll see an example later in this chapter. Otherwise, they're mainly meant for systems programmers, as are <&- (force standard input to close) and >&- (force standard output to close).

Before we leave this topic, we should just note that 1> is the same as >, and 0< is the same as <. If you understand this, then you probably know all you need to know about file descriptors.

[1] Don't put it past people to come up to your unattended terminal and cause mischief!

String I/O

Now we'll zoom back in to the string I/O level and examine the echo and read statements, which give the shell I/O capabilities that are more analogous to those of conventional programming languages.

echo

As we've seen countless times in this book, echo simply prints its arguments to standard output. Now we'll explore the command in greater detail.

Options to echo

echo accepts a few dash options, listed in Table 7-2.

Table 7-2. echo options

Option

Function

-e

Turns on the interpretation of backslash-escaped characters

-E

Turns off the interpretation of backslash-escaped characters on systems where this mode is the default

-n

Omits the final newline (same as the \c escape sequence)

echo escape sequences

echo accepts a number of escape sequences that start with a backslash.[2] They are listed in Table 7-3.

These sequences exhibit fairly predictable behavior, except for \f: on some displays, it causes a screen clear, while on others it causes a line feed. It ejects the page on most printers. \v is somewhat obsolete; it usually causes a line feed.

Table 7-3. echo escape sequences

Sequence

Character printed

\a

ALERT or CTRL-G (bell)

\b

BACKSPACE or CTRL-H

\c

Omit final NEWLINE

\e

Escape character (same as \E)

\E

Escape character[3]

\f

FORMFEED or CTRL-L

\n

NEWLINE (not at end of command) or CTRL-J

\r

RETURN (ENTER) or CTRL-M

\t

TAB or CTRL-I

\v

VERTICAL TAB or CTRL-K

\ n

ASCII character with octal (base-8) value n, where n is 1 to 3 digits

\0nnn

The eight-bit character whose value is the octal (base-8) value nnn where nnn is 1 to 3 digits

\xHH

The eight-bit character whose value is the hexadecimal (base-16) value HH (one or two digits)

\\

Single backslash

[3] Not available in versions of bash prior to 2.0.

The \n, \0, and \x sequences are even more device-dependent and can be used for complex I/O, such as cursor control and special graphics characters.

printf

bash 's echo command is quite powerful and for most cases entirely adequate. However, there are occasions where a more powerful and flexible approach is needed for printing information, especially when the information needs to be formatted. bash provides this by giving access to a powerful system-level printing library known as printf.[4]

The printf command can output a string similar to the echo command:

printf "hello world"

Unlike the echo command, printf does not automatically provide a newline. If we want to make it do the exactly same as a standard echo then we must provide one by adding \n to the end:

printf "hello world\n"

You may ask why this is any better than echo. The printf command has two parts, which is what makes it so powerful.

printf format-string [arguments]

The first part is a string that describes the format specifications; this is best supplied as a string constant in quotes. The second part is an argument list, such as a list of strings or variable values that correspond to the format specifications. (The format is reused as necessary to use up all of the arguments. If the format requires more arguments than are supplied, the extra format specifications behave as if a zero value or null string, as appropriate, had been supplied). A format specification is preceded by a percent sign (%), and the specifier is one of the characters described below. Two of the main format specifiers are %s for strings and %d for decimal integers.

This sounds complicated but we can begin by re-casting the last example:

printf "%s %s\n" hello world

This prints hello world on a line of its own, just as the previous example did. The word hello has been assigned to the first format specification, %s. Likewise, world has been assigned to the second %s. printf then prints these two strings followed by the newline.

We could also achieve the same result by making hello an explicit part of the format string:

$ printf "hello %s\n" world
hello world

The allowed specifiers are shown in Table 7-4.

Table 7-4. printf format specifiers

Specifier

Description

%c

ASCII character (prints first character of corresponding argument)

%d

Decimal integer

%i

Same as %d

%e

Floating-point format ([-]d.precisione[+-]dd) (see following text for meaning of precision)

%E

Floating-point format ([-]d.precisionE[+-]dd)

%f

Floating-point format ([-]ddd.precision)

%g

%e or %f conversion, whichever is shorter, with trailing zeros removed

%G

%E or %f conversion, whichever is shortest, with trailing zeros removed

%o

Unsigned octal value

%s

String

%u

Unsigned decimal value

%x

Unsigned hexadecimal number; uses a-f for 10 to 15

%X

Unsigned hexadecimal number; uses A-F for 10 to 15

%%

Literal %

The printf command can be used to specify the width and alignment of output fields. A format expression can take three optional modifiers following % and preceding the format specifier:

               %flags width.precision format-specifier

The width of the output field is a numeric value. When you specify a field width, the contents of the field are right-justified by default. You must specify a flag of "-" to get left-justification. (The rest of the flags are discussed shortly.) Thus, "%-20s" outputs a left-justified string in a field 20 characters wide. If the string is less than 20 characters, the field is padded with whitespace to fill. In the following examples, a | is output to indicate the actual width of the field. The first example right-justifies the text:

printf "|%10s|\n" hello

It produces:

|     hello|

The next example left-justifies the text:

printf "|%-10s|\n" hello

It produces:

|hello     |

The precision modifier, used for decimal or floating-point values, controls the number of digits that appear in the result. For string values, it controls the maximum number of characters from the string that will be printed.

You can specify both the width and precision dynamically, via values in the printf argument list. You do this by specifying asterisks, instead of literal values.

$ myvar=42.123456
$ printf "|%*.*G|\n" 5 6 $myvar
|42.1235|

In this example, the width is 5, the precision is 6, and the value to print comes from the value of myvar.

The precision is optional. Its exact meaning varies by control letter, as shown in Table 7-5.

Table 7-5. Meaning of precision

Conversion

Precision means

%d, %I, %o, %u, %x, %X

The minimum number of digits to print. When the value has fewer digits, it is padded with leading zeros. The default precision is 1.

%e, %E

The minimum number of digits to print. When the value has fewer digits, it is padded with zeros after the decimal point. The default precision is 10. A precision of 0 inhibits printing of the decimal point.

%f

The number of digits to the right of the decimal point.

%g, %G

The maximum number of significant digits.

%s

The maximum number of characters to print.

Finally, one or more flags may precede the field width and the precision. We've already seen the "-" flag for left-justification. The rest of the flags are shown in Table 7-6.

Table 7-6. Flags for printf

Character

Description

-

Left-justify the formatted value within the field.

space

Prefix positive values with a space and negative values with a minus.

+

Always prefix numeric values with a sign, even if the value is positive.

#

Use an alternate form: %o has a preceding 0; %x and %X are prefixed with 0x and 0X, respectively; %e, %E and %f always have a decimal point in the result; and %g and %G do not have trailing zeros removed.

0

Pad output with zeros, not spaces. This only happens when the field width is wider than the converted result. In the C language, this flag applies to all output formats, even non-numeric ones. For bash, it only applies to the numeric formats.

If printf cannot perform a format conversion, it returns a non-zero exit status.

Additional bash printf specifiers

Besides the standard specifiers just described, the bash shell (and other POSIX compliant shells) accepts two additional specifiers. These provide useful features at the expense of nonportability to versions of the printf command found in some other shells and in other places in UNIX:

%b

When used instead of %s, expands echo-style escape sequences in the argument string. For example:

$ printf "%s\n" 'hello\nworld'
hello\nworld
$ printf "%b\n" 'hello\nworld'
hello
world

%q

When used instead of %s, prints the string argument in such a way that it can be used for shell input. For example:

$ printf "%q\n" "greetings to the world"
greetings\ to\ the\ world

read

The other half of the shell's string I/O facilities is the read command, which allows you to read values into shell variables. The basic syntax is:

read var1 var2...

This statement takes a line from the standard input and breaks it down into words delimited by any of the characters in the value of the environment variable IFS (see Chapter 4; these are usually a space, a TAB, and NEWLINE). The words are assigned to variables var1, var2, etc. For example:

$ read character1 character2alice duchess$ echo $character1alice
$ echo $character2duchess

If there are more words than variables, then excess words are assigned to the last variable. If you omit the variables altogether, the entire line of input is assigned to the variable REPLY.

You may have identified this as the "missing ingredient" in the shell programming capabilities we have seen thus far. It resembles input statements in conventional languages, like its namesake in Pascal. So why did we wait this long to introduce it?

Actually, read is sort of an "escape hatch" from traditional shell programming philosophy, which dictates that the most important unit of data to process is a text file, and that UNIX utilities such as cut, grep, sort, etc., should be used as building blocks for writing programs.

read, on the other hand, implies line-by-line processing. You could use it to write a shell script that does what a pipeline of utilities would normally do, but such a script would inevitably look like:

while (read a line) do
    process the line
    print the processed line
end

This type of script is usually much slower than a pipeline; furthermore, it has the same form as a program someone might write in C (or some similar language) that does the same thing much faster. In other words, if you are going to write it in this line-by-line way, there is little point in writing a shell script.

Reading lines from files

Nevertheless, shell scripts with read are useful for certain kinds of tasks. One is when you are reading data from a file small enough so that efficiency isn't a concern (say a few hundred lines or less), and it's really necessary to get bits of input into shell variables.

Consider the case of a UNIX machine that has terminals that are hardwired to the terminal lines of the machine. It would be nice if the TERM environment variable was set to the correct terminal type when a user logged in.

One way to do this would be to have some code that sets the terminal information when a user logs in. This code would presumably reside in /etc/profile, the system-wide initialization file that bash runs before running a user's .bash_profile. If the terminals on the system change over time—as surely they must—then the code would have to be changed. It would be better to store the information in a file and change just the file instead.

Assume we put the information in a file whose format is typical of such UNIX "system configuration" files: each line contains a device name, a TAB, and a TERM value.

We'll call the file /etc/terms, and it would typically look something like this:

console        console
tty01        wy60
tty03        vt100
tty04        vt100
tty07        wy85
tty08        vt100

The values on the left are terminal lines and those on the right are the terminal types that TERM can be set to. The terminals connected to this system are a Wyse 60 (wy60), three VT100s (vt100), and a Wyse 85 (wy85). The machines' master terminal is the console, which has a TERM value of console.

We can use read to get the data from this file, but first we need to know how to test for the end-of-file condition. Simple: read's exit status is 1 (i.e., non-zero) when there is nothing to read. This leads to a clean while loop:

TERM=vt100       # assume this as a default
line=$(tty)
while read dev termtype; do
    if [ $dev = $line ]; then
        TERM=$termtype
        echo "TERM set to $TERM."
        break
    fi
done

The while loop reads each line of the input into the variables dev and termtype. In each pass through the loop, the if looks for a match between $dev and the user's tty ($line, obtained by command substitution from the tty command). If a match is found, TERM is set, a message is printed, and the loop exits; otherwise TERM remains at the default setting of vt100.

We are not quite done, though: this code reads from the standard input, not from /etc/terms! We need to know how to redirect input to multiple commands. It turns out that there are a few ways of doing this.

I/O redirection and multiple commands

One way to solve the problem is with a subshell, as we'll see in the next chapter. This involves creating a separate process to do the reading. However, it is usually more efficient to do it in the same process; bash gives us four ways of doing this.

The first, which we have seen already, is with a function:

findterm ( ) {
    TERM=vt100       # assume this as a default
    line=$(tty)
    while read dev termtype; do
        if [ $dev = $line ]; then
            TERM=$termtype
            echo "TERM set to $TERM."
            break;
        fi
    done
}

findterm < /etc/terms

A function acts like a script in that it has its own set of standard I/O descriptors, which can be redirected in the line of code that calls the function. In other words, you can think of this code as if findterm were a script and you typed findterm < /etc/terms on the command line. The read statement takes input from /etc/terms a line at a time, and the function runs correctly.

The second way is to simplify this slightly by placing the redirection at the end of the function:

findterm ( ) {
    TERM=vt100       # assume this as a default
    line=$(tty)
    while read dev termtype; do
        if [ $dev = $line ]; then
            TERM=$termtype
            echo "TERM set to $TERM."
            break;
        fi
    done
} < /etc/terms

Whenever findterm is called, it takes its input from /etc/terms.

The third way is by putting the I/O redirector at the end of the loop, like this:

TERM=vt100       # assume this as a default
line=$(tty)
while read dev termtype; do
    if [ $dev = $line ]; then
        TERM=$termtype
        echo "TERM set to $TERM."
        break;
    fi
done < /etc/terms

You can use this technique with any flow-control construct, including if...fi, case...esac, select...done, and until...done. This makes sense because these are all compound statements that the shell treats as single commands for these purposes. This technique works fine—the read command reads a line at a time—as long as all of the input is done within the compound statement.

Command blocks

But if you want to redirect I/O to or from an arbitrary group of commands without creating a separate process, you need to use a construct that we haven't seen yet. If you surround some code with { and }, the code will behave like a function that has no name. This is another type of compound statement. In accordance with the equivalent concept in the C language, we'll call this a command block.

What good is a block? In this case, it means that the code within the curly brackets ({}) will take standard I/O descriptors just as we described in the last block of code. This construct is appropriate for the current example because the code needs to be called only once, and the entire script is not really large enough to merit breaking down into functions. Here is how we use a block in the example:

{
    TERM=vt100       # assume this as a default
    line=$(tty)
    while read dev termtype; do
        if [ $dev = $line ]; then
            TERM=$termtype
            echo "TERM set to $TERM."
            break;
        fi
    done
} < /etc/terms

To help you understand how this works, think of the curly brackets and the code inside them as if they were one command, i.e.:

{ TERM=vt100; line=$(tty); while ... } < /etc/terms;

Configuration files for system administration tasks like this one are actually fairly common; a prominent example is /etc/hosts, which lists machines that are accessible in a TCP/IP network. We can make /etc/terms more like these standard files by allowing comment lines in the file that start with #, just as in shell scripts. This way /etc/terms can look like this:

#
# System Console is console
console        console
#
# Cameron's line has a Wyse 60
tty01        wy60
...

We can handle comment lines by modifying the while loop so that it ignores lines beginning with #. We can place a grep in the test:

if [ -z "$(echo $dev | grep ^#)" ]  && [ $dev = $line ]; then
    ...

As we saw in Chapter 5, the && combines the two conditions so that both must be true for the entire condition to be true.

As another example of command blocks, consider the case of creating a standard algebraic notation frontend to the dc command. dc is a UNIX utility that simulates a Reverse Polish Notation (RPN) calculator:[5]

{ while read line; do
    echo "$(alg2rpn $line)"
  done
} | dc

We'll assume that the actual conversion from one notation to the other is handled by a function called alg2rpn. It takes a line of standard algebraic notation as an argument and prints the RPN equivalent on the standard output. The while loop reads lines and passes them through the conversion function, until an EOF is typed. Everything is executed inside the command block and the output is piped to the dc command for evaluation.

Reading user input

The other type of task to which read is suited is prompting a user for input. Think about it: we have hardly seen any such scripts so far in this book. In fact, the only ones were the modified solutions to Task 5-4, which involved select.

As you've probably figured out, read can be used to get user input into shell variables.

We can use echo to prompt the user, like this:

echo -n 'terminal? '
read TERM
echo "TERM is $TERM"

Here is what this looks like when it runs:

terminal? wy60TERM is wy60

However, shell convention dictates that prompts should go to standard error, not standard output. (Recall that select prompts to standard error.) We could just use file descriptor 2 with the output redirector we saw earlier in this chapter:

echo -n 'terminal? ' >&2
read TERM
echo TERM is $TERM

We'll now look at a more complex example by showing how Task 5-5 would be done if select didn't exist. Compare this with the code in Chapter 5:

echo 'Select a directory:'
done=false

while [ $done = false ]; do
    do=true
    num=1
    for direc in $DIR_STACK; do
        echo $num) $direc
        num=$((num+1))
    done
    echo -n 'directory? '
    read REPLY

    if [ $REPLY -lt $num ] && [ $REPLY -gt 0 ]; then
        set - $DIR_STACK

        #statements that manipulate the stack...

        break
    else
        echo 'invalid selection.'
    fi
done

The while loop is necessary so that the code repeats if the user makes an invalid choice. select includes the ability to construct multicolumn menus if there are many choices, and better handling of null user input.

Before leaving read, we should note that it has eight options: -a, -d, -e, -n, -p, -r, -t, and -s.[6] The first of these options allows you to read values into an array. Each successive item read in is assigned to the given array starting at index 0. For example:

$ read -a people
alice duchess dodo
$ echo ${people[2]}
dodo
$

In this case, the array people now contains the items alice, duchess, and dodo.

A delimiter can be specified with the -d option. This will read a line up until the first character of the delimiter is reached. For example:

$ read -s stop aline
alice duches$
$ echo $aline
alice duche
$

The option -e can be used only with scripts run from interactive shells. It causes readline to be used to gather the input line, which means that you can use any of the readline editing features that we looked at in Chapter 2.

The -n option specifies how many characters will be read by read. For example, if we specify that it should read only ten characters in then it will return after reading that many:

$ read -n 10 aline
abcdefghij$
$ echo $aline
abcdefghij
$

The -p option followed by a string argument prints the string before reading input. We could have used this in the earlier examples of read, where we printed out a prompt before doing the read. For example, the directory selection script could have used read -p `directory?' REPLY.

read lets you input lines that are longer than the width of your display by providing a backslash (\) as a continuation character, just as in shell scripts. The -r option overrides this, in case your script reads from a file that may contain lines that happen to end in backslashes. read -r also preserves any other escape sequences the input might contain. For example, if the file hatter contains this line:

A line with a\n escape sequence

Then read -r aline will include the backslash in the variable aline, whereas without the -r, read will "eat" the backslash. As a result:

$ read -r aline < hatter$ echo -e "$aline"
A line with a
 escape sequence
$

However:

$ read aline < hatter$ echo -e "$aline"
A line with an escape sequence
$

The -s option forces read to not echo the characters that are typed to the terminal. This can be useful in cases where a shell may want to take single keystroke commands without displaying the typed characters on the terminal (e.g., moving something around with the arrow keys). In this case it could be combined with the -n option to read a single character each time in a loop: read -s -n1 key

The last option, -t, allows a time in seconds to be specified. read will wait the specified time for input and then finish. This is useful if you want a script to wait for input but continue processing if nothing is supplied.

[2] You must use a double backslash if you don't surround the string that contains them with quotes; otherwise, the shell itself "steals" a backslash before passing the arguments to echo.

[4] printf is not available in versions of bash prior to version 2.02.

[5] If you have ever owned a Hewlett-Packard calculator you will be familiar with RPN. We'll discuss RPN further in one of the exercises at the end of this chapter.

[6] -a, -d, -e, -n, -p, -t and -s are not available in versions of bash prior to 2.0.

Command-Line Processing

We've seen how the shell uses read to process input lines: it deals with single quotes (`'), double quotes (""), and backslashes (\); it separates lines into words, according to delimiters in the environment variable IFS; and it assigns the words to shell variables. We can think of this process as a subset of the things the shell does when processing command lines.

We've touched upon command-line processing throughout this book; now is a good time to make the whole thing explicit. Each line that the shell reads from the standard input or a script is called a pipeline; it contains one or more commands separated by zero or more pipe characters (|). For each pipeline it reads, the shell breaks it up into commands, sets up the I/O for the pipeline, then does the following for each command (Figure 7-1):

Figure 7-1. Steps in command-line processing

Splits the command into tokens that are separated by the fixed set of metacharacters: SPACE, TAB, NEWLINE, ;, (, ), <, >, |, and &. Types of tokens include words, keywords, I/O redirectors, and semicolons.

Checks the first token of each command to see if it is a keyword with no quotes or backslashes. If it's an opening keyword, such as if and other control-structure openers, function, {, or (, then the command is actually a compound command. The shell sets things up internally for the compound command, reads the next command, and starts the process again. If the keyword isn't a compound command opener (e.g., is a control-structure "middle" like then, else, or do, an "end" like fi or done, or a logical operator), the shell signals a syntax error.

Checks the first word of each command against the list of aliases. If a match is found, it substitutes the alias's definition and goes back to Step 1; otherwise, it goes on to Step 4. This scheme allows recursive aliases (see Chapter 3). It also allows aliases for keywords to be defined, e.g., alias aslongas=while or alias procedure=function.

Performs brace expansion. For example, a{b,c} becomes ab ac.

Substitutes the user's home directory ($HOME) for tilde if it is at the beginning of a word. Substitutes user's home directory for ~user.[7]

Performs parameter (variable) substitution for any expression that starts with a dollar sign ($).

Does command substitution for any expression of the form $(string).

Evaluates arithmetic expressions of the form $((string)).

Takes the parts of the line that resulted from parameter, command, and arithmetic substitution and splits them into words again. This time it uses the characters in $IFS as delimiters instead of the set of metacharacters in Step 1.

Performs pathname expansion, a.k.a. wildcard expansion, for any occurrences of *, ?, and [/] pairs.

Uses the first word as a command by looking up its source according to the rest of the list in Chapter 4, i.e., as a function command, then as a built-in, then as a file in any of the directories in $PATH.

Runs the command after setting up I/O redirection and other such things.

That's a lot of steps—and it's not even the whole story! But before we go on, an example should make this process clearer. Assume that the following command has been run:

alias ll="ls -l"

Further assume that a file exists called .hist537 in user alice's home directory, which is /home/alice, and that there is a double-dollar-sign variable $$ whose value is 2537 (we'll see what this special variable is in the next chapter).

Now let's see how the shell processes the following command:

ll $(type -path cc) ~alice/.*$(($$%1000))

Here is what happens to this line:

ll $(type -path cc) ~alice/.*$(($$%1000)) splits the input into words.

ll is not a keyword, so Step 2 does nothing.

ls -l $(type -path cc) ~alice/.*$(($$%1000)) substitutes ls -l for its alias "ll". The shell then repeats Steps 1 through 3; Step 2 splits the ls -l into two words.

ls -l $(type -path cc) ~alice/.*$(($$%1000)) does nothing.

ls -l $(type -path cc) /home/alice/.*$(($$%1000)) expands ~alice into /home/alice.

ls -l $(type -path cc) /home/alice/.*$((2537%1000)) substitutes 2537 for $$.

ls -l /usr/bin/cc /home/alice/.*$((2537%1000)) does command substitution on "type -path cc".

ls -l /usr/bin/cc /home/alice/.*537 evaluates the arithmetic expression 2537%1000.

ls -l /usr/bin/cc /home/alice/.*537 does nothing.

ls -l /usr/bin/cc /home/alice/.hist537 substitutes the filename for the wildcard expression .*537.

The command ls is found in /usr/bin.

/usr/bin/ls is run with the option -l and the two arguments.

Although this list of steps is fairly straightforward, it is not the whole story. There are still five ways to modify the process: quoting; using command, builtin, or enable; and using the advanced command eval.

Quoting

You can think of quoting as a way of getting the shell to skip some of the 12 steps above. In particular:

Single quotes (`') bypass everything through Step 10—including aliasing. All characters inside a pair of single quotes are untouched. You can't have single quotes inside single quotes—not even if you precede them with backslashes.[8]

Double quotes ("") bypass Steps 1 through 4, plus steps 9 and 10. That is, they ignore pipe characters, aliases, tilde substitution, wildcard expansion, and splitting into words via delimiters (e.g., blanks) inside the double quotes. Single quotes inside double quotes have no effect. But double quotes do allow parameter substitution, command substitution, and arithmetic expression evaluation. You can include a double quote inside a double-quoted string by preceding it with a backslash (\). You must also backslash-escape $, ` (the archaic command substitution delimiter), and \ itself.

Table 7-7 has simple examples to show how these work; they assume the statement person=hatter was run and user alice's home directory is /home/alice.

If you are wondering whether to use single or double quotes in a particular shell programming situation, it is safest to use single quotes unless you specifically need parameter, command, or arithmetic substitution.

Table 7-7. Examples of quoting rules

Expression

Value

$person

hatter

"$person"

hatter

\$person

$person

`$person'

$person

"'$person'"

'hatter'

~alice

/home/alice

"~alice"

~alice

`~alice'

~alice

command, builtin, and enable

Before moving on to the last part of the command-line processing cycle, we'll take a look at the command lookup order that we touched on in Chapter 4 and how it can be altered with several shell built-ins.

The default order for command lookup is functions, followed by built-ins, with scripts and executables last. There are three built-ins that you can use to override this order: command, builtin, and enable.

command removes alias and function lookup.[9] Only built-ins and commands found in the search path are executed. This is useful if you want to create functions that have the same name as a shell built-in or a command in the search path and you need to call the original command from the function. For instance, we might want to create a function called cd that replaces the standard cd command with one that does some fancy things and then executes the built-in cd:

cd ( )
{
    #Some fancy things
    command cd
}

In this case we avoid plunging the function into a recursive loop by placing command in front of cd. This ensures that the built-in cd is called and not the function.

command has some options, listed in Table 7-8.

Table 7-8. command options

Option

Description

-p

Uses a default value for PATH

-v

Prints the command or pathname used to invoke the command

-V

A more verbose description than with -v

-

Turns off further option checking

The -p option is a default path which guarantees that the command lookup will find all of the standard UNIX utilities. In this case, command will ignore the directories in your PATH.[10]

builtin is very similar to command but is more restrictive. It looks up only built-in commands, ignoring functions and commands found in PATH. We could have replaced command with builtin in the cd example above.

The last command enables and disables shell built-ins—it is called enable. Disabling a built-in allows a shell script or executable of the same name to be run without giving a full pathname. Consider the problem many beginning UNIX shell programmers have when they name a script test. Much to their surprise, executing test usually results in nothing, because the shell is executing the built-in test, rather than the shell script. Disabling the built-in with enable overcomes this.[11]

Table 7-9 lists the options available with enable.[12] Some options are for working with dynamically loadable built-ins. See Appendix C for details on these options, and how to create and load your own built-in commands.

Table 7-9. enable options

Option

Description

-a

Displays every built-in and whether it is enabled or not

-d

Deletes a built-in loaded with -f

-f filename

Loads a new built-in from the shared-object filename

-n

Disables a built-in or displays a list of disabled built-ins

-p

Displays a list of all of the built-ins

-s

Restricts the output to POSIX "special" built-ins

Of these options, -n is the most useful; it is used to disable a built-in. enable without an option enables a built-in. More than one built-in can be given as arguments to enable, so enable -n pushd popd dirs would disable the pushd, popd, and dirs built-ins.[13]

You can find out what built-ins are currently enabled and disabled by using the command on its own, or with the -p option; enable or enable -p will list all enabled built-ins, and enable -n will list all disabled built-ins. To get a complete list with their current status, you can use enable -a.

The -s option restricts the output to POSIX `special' built-ins. These are :, ., source, break, continue, eval, exec, exit, export, readonly, return, set, shift, trap, and unset.

eval

We have seen that quoting lets you skip steps in command-line processing. Then there's the eval command, which lets you go through the process again. Performing command-line processing twice may seem strange, but it's actually very powerful: it lets you write scripts that create command strings on the fly and then pass them to the shell for execution. This means that you can give scripts "intelligence" to modify their own behavior as they are running.

The eval statement tells the shell to take eval's arguments and run them through the command-line processing steps all over again. To help you understand the implications of eval, we'll start with a trivial example and work our way up to a situation in which we're constructing and running commands on the fly.

eval ls passes the string ls to the shell to execute; the shell prints a list of files in the current directory. Very simple; there is nothing about the string ls that needs to be sent through the command-processing steps twice. But consider this:

listpage="ls | more"
$listpage

Instead of producing a paginated file listing, the shell will treat | and more as arguments to ls, and ls will complain that no files of those names exist. Why? Because the pipe character "appears" in Step 6 when the shell evaluates the variable, after it has actually looked for pipe characters. The variable's expansion isn't even parsed until Step 9. As a result, the shell will treat | and more as arguments to ls, so that ls will try to find files called | and more in the current directory!

Now consider eval $listpage instead of just $listpage. When the shell gets to the last step, it will run the command eval with arguments ls, |, and more. This causes the shell to go back to Step 1 with a line that consists of these arguments. It finds | in Step 2 and splits the line into two commands, ls and more. Each command is processed in the normal (and in both cases trivial) way. The result is a paginated list of the files in your current directory.

Now you may start to see how powerful eval can be. It is an advanced feature that requires considerable programming cleverness to be used most effectively. It even has a bit of the flavor of artificial intelligence, in that it enables you to write programs that can "write" and execute other programs.[14] You probably won't use eval for everyday shell programming, but it's worth taking the time to understand what it can do.

As a more interesting example, we'll revisit Task 4-1, the very first task in the book. In it, we constructed a simple pipeline that sorts a file and prints out the first N lines, where N defaults to 10. The resulting pipeline was:

sort -nr $1 | head -${2:-10}

The first argument specified the file to sort; $2 is the number of lines to print.

Now suppose we change the task just a bit so that the default is to print the entire file instead of 10 lines. This means that we don't want to use head at all in the default case. We could do this in the following way:

if [ -n "$2" ]; then
    sort -nr $1 | head -$2
else
    sort -nr $1
fi

In other words, we decide which pipeline to run according to whether $2 is null. But here is a more compact solution:

eval sort -nr \$1 ${2:+"| head -\$2"}

The last expression in this line evaluates to the string | head -\$2 if $2 exists (is not null); if $2 is null, then the expression is null too. We backslash-escape dollar signs (\$) before variable names to prevent unpredictable results if the variables' values contain special characters like > or |. The backslash effectively puts off the variables' evaluation until the eval command itself runs. So the entire line is either:

eval sort -nr \$1 | head -\$2

if $2 is given, or:

eval sort -nr \$1

if $2 is null. Once again, we can't just run this command without eval because the pipe is "uncovered" after the shell tries to break the line up into commands. eval causes the shell to run the correct pipeline when $2 is given.

Next, we'll revisit Task 7-2 from earlier in this chapter, the start script that lets you start a command in the background and save its standard output and standard error in a logfile. Recall that the one-line solution to this task had the restriction that the command could not contain output redirectors or pipes. Although the former doesn't make sense when you think about it, you certainly would want the ability to start a pipeline in this way.

eval is the obvious way to solve this problem:

eval "$@" > logfile 2>&1 &

The only restriction that this imposes on the user is that pipes and other such special characters be quoted (surrounded by quotes or preceded by backslashes).

Here's a way to apply eval in conjunction with various other interesting shell programming concepts.

Task 7-3

Implement the core of the make utility as a shell script.

make is known primarily as a programmer's tool, but it seems as though someone finds a new use for it every day. Without going into too much extraneous detail, make basically keeps track of multiple files in a particular project, some of which depend on others (e.g., a document depends on its word processor input file(s)). It makes sure that when you change a file, all of the other files that depend on it are processed.

For example, assume you're using the troff word processor to write a book. You have files for the book's chapters called ch1.t, ch2.t, and so on; the troff output for these files are ch1.out, ch2.out, etc. You run commands like troff ch N .t > ch N .out to do the processing. While you're working on the book, you tend to make changes to several files at a time.

In this situation, you can use make to keep track of which files need to be reprocessed, so that all you need to do is type make, and it will figure out what needs to be done. You don't need to remember to reprocess the files that have changed.

How does make do this? Simple: it compares the modification times of the input and output files (called sources and targets in make terminology), and if the input file is newer, then make reprocesses it.

You tell make which files to check by building a file called makefile that has constructs like this:

               target : source1 source2 ...
                 commands to make target

This essentially says, "For target to be up to date, it must be newer than all of the sources. If it's not, run the commands to bring it up to date." The commands are on one or more lines that must start with TABs: e.g., to make ch7.out:

ch7.out : ch7.t
          troff ch7.t > ch7.out

Now suppose that we write a shell function called makecmd that reads and executes a single construct of this form. Assume that the makefile is read from standard input. The function would look like the following code.

makecmd ( )
{
    read target colon sources
    for src in $sources; do
        if [ $src -nt $target ]; then
            while read cmd && [ $(grep \t* $cmd) ]; do
                echo "$cmd"
                eval ${cmd#\t}
            done
            break
        fi
    done
}

This function reads the line with the target and sources; the variable colon is just a placeholder for the :. Then it checks each source to see if it's newer than the target, using the -nt file attribute test operator that we saw in Chapter 5. If the source is newer, it reads, prints, and executes the commands until it finds a line that doesn't start with a TAB or it reaches end-of-file. (The real make does more than this; see the exercises at the end of this chapter.) After running the commands (which are stripped of the initial TAB), it breaks out of the for loop, so that it doesn't run the commands more than once.

As a final example of eval, we'll look again at procimage, the graphics utility that we developed in the last three chapters. Recall that one of the problems with the script as it stands is that it performs the process of scaling and bordering regardless of whether you want them. If no command-line options are present, a default size, border width, and border color are used. Rather than invent some if then logic to get around this, we'll look at how you can dynamically build a pipeline of commands in the script; those commands that aren't needed simply disappear when the time comes to execute them. As an added bonus, we'll add another capability to our script: image enhancement.

Looking at the procimage script you'll notice that the NetPBM commands form a nice pipeline; the output of one operation becomes the input to the next, until we end up with the final image. If it weren't for having to use a particular conversion utility, we could reduce the script to the following pipeline (ignoring options for now):

cat $filename | convertimage | pnmscale | pnmmargin |\
    pnmtojpeg > $outfile

Or, better yet:

convertimage $filename | pnmscale | pnmmargin | pnmtojpeg \
    > $outfile

As we've already seen, this is equivalent to:

eval convertimage $filename | pnmscale | pnmmargin |\
 pnmtojpeg > $outfile

And knowing what we do about how eval operates, we can transform this into:

eval "convertimage" $filename " | pnmscale" " | pnmmargin" \
    " | pnmtojpeg " > $outfile

And thence to:

convert='convertimage'
scale=' | pnmscale'
border=' | pnmmargin'
standardise=' | pnmtojpeg

eval $convert $filename $scale $border $standardise > $outfile

Now consider what happens when we don't want to scale the image. We do this:

scale=""

while getopts ":s:w:c:" opt; do
    case $opt in
      s  ) scale=' | pnmscale' ;;

 ...

eval $convert $filename $scale $border $standardise > $outfile

In this code fragment, scale is set to a default of the empty string. If -s is not given on the command line, then the final line evaluates with $scale as the empty string and the pipeline will "collapse" into:

$convert $filename $border $standardise > $outfile

Using this principle, we can modify the previous version of the procimage script and produce a pipeline version. For each input file we need to construct and run a pipeline based upon the options given on the command line. Here is the new version:

# Set up the defaults
width=1
colour='-color grey'
usage="Usage: $0 [-s N] [-w N] [-c S] imagefile..."

# Initialise the pipeline components
standardise=' | pnmtojpeg -quiet'

while getopts ":s:w:c:" opt; do
    case $opt in
      s  ) size=$OPTARG
           scale=' | pnmscale -quiet -xysize $size $size' ;;
      w  ) width=$OPTARG
           border=' | pnmmargin $colour $width' ;;
      c  ) colour="-color $OPTARG"
           border=' | pnmmargin $colour $width' ;;
      \? ) echo $usage
           exit 1 ;;
    esac
done

shift $(($OPTIND - 1))

if [ -z "$@" ]; then
    echo $usage
    exit 1
fi

# Process the input files
for filename in "$@"; do
    case $filename in
        *.gif ) convert='giftopnm'  ;;

        *.tga ) convert='tgatoppm'  ;;

        *.xpm ) convert='xpmtoppm'  ;;

        *.pcx ) convert='pcxtoppm'  ;;

        *.tif ) convert='tifftopnm'  ;;

        *.jpg ) convert='jpegtopnm -quiet' ;;

            * ) echo "$0: Unknown filetype '${filename##*.}'"
                exit 1;;
    esac

    outfile=${filename%.*}.new.jpg

    eval $convert $filename $scale $border $standardise > $outfile

done

This version has been simplified somewhat from the previous one in that it no longer needs a temporary file to hold the converted file. It is also a lot easier to read and understand. To show how easy it is to add further processing to the script, we'll now add one more NetPBM utility.

NetPBM provides a utility to enhance an image and make it sharper: pnmnlfilt. This utility is an image filter that samples the image and can enhance edges in the image (it can also smooth the image if given the appropriate values). It takes two parameters that tell it how much to enhance the image. For the purposes of our script, we'll just choose some optimal values and provide an option to switch enhancement on and off in the script.

To put the new capability in place all we have to do is add the new option (-S) to the getopts case statement, update the usage line, and add a new variable to the pipeline. Here is the new code:

# Set up the defaults
width=1
colour='-color grey'
usage="Usage: $0 [-S] [-s N] [-w N] [-c S] imagefile..."

# Initialise the pipeline components
standardise=' | pnmtojpeg -quiet'

while getopts ":Ss:w:c:" opt; do
    case $opt in
      S  ) sharpness=' | pnmnlfilt -0.7 0.45' ;;
      s  ) size=$OPTARG
           scale=' | pnmscale -quiet -xysize $size $size' ;;
      w  ) width=$OPTARG
           border=' | pnmmargin $colour $width' ;;
      c  ) colour="-color $OPTARG"
           border=' | pnmmargin $colour $width' ;;
      \? ) echo $usage
           exit 1 ;;
    esac
done

shift $(($OPTIND - 1))

if [ -z "$@" ]; then
    echo $usage
    exit 1
fi

# Process the input files
for filename in "$@"; do
    case $filename in
        *.gif ) convert='giftopnm'  ;;

        *.tga ) convert='tgatoppm'  ;;

        *.xpm ) convert='xpmtoppm'  ;;

        *.pcx ) convert='pcxtoppm'  ;;

        *.tif ) convert='tifftopnm'  ;;

        *.jpg ) convert='jpegtopnm -quiet' ;;

            * ) echo "$0: Unknown filetype '${filename##*.}'"
                exit 1;;
    esac

    outfile=${filename%.*}.new.jpg

    eval $convert $filename $scale $border $sharpness $standardise > $outfile

done

We could go on forever with increasingly complex examples of eval, but we'll settle for concluding the chapter with a few exercises. The questions in Exercise 3 are really more like items on the menu of food for thought.

Here are a couple of ways to enhance procimage, the graphics utility:

Add an option, -q, that allows the user to turn on and off the printing of diagnostic information from the NetPBM utilities. You'll need to map -q to the -quiet option of the utilities. Also, add your own diagnostic output for those utilities that don't print anything, e.g., the format conversions.

Add an option that allows the user to specify the order that the NetPBM processes take place, i.e., whether enhancing the image comes before bordering, or bordering comes before resizing. Rather than using an if construct to make the choice amongst hard-coded orders, construct a string dynamically which will look similar to this:

"eval $convert $filename $scale $border $sharpness
    $standardise > $outfile"

You'll then need eval to evaluate this string.

The function makecmd in the solution to Task 7-3 represents an oversimplification of the real make's functionality. make actually checks file dependencies recursively, meaning that a source on one line in a makefile can be a target on another line. For example, the book chapters in the example could themselves depend on some figures in separate files that were made with a graphics package.

Write a function called readtargets that goes through the makefile and stores all of the targets in a variable or temporary file.

makecmd merely checks to see if any of the sources are newer than the given target. It should really be a recursive routine that looks like this:

function makecmd ( )
{
    target=$1
    get sources for $target
    for each source src; do
        if $src is also a target in this makefile then
            makecmd $src
        fi
        if [ $src -nt $target ]; then
            run commands to make target
            return
        fi
    done
}

Implement this.

Write the "driver" script that turns the makecmd function into a full make program. This should make the target given as argument, or if none is given, the first target listed in the makefile.

The above makecmd still doesn't do one important thing that the real make does: allow for "symbolic" targets that aren't files. These give make much of the power that makes it applicable to such an incredible variety of situations. Symbolic targets always have a modification time of 0, so that make always runs the commands to make them. Modify makecmd so that it allows for symbolic targets. (Hint: the crux of this problem is to figure out how to get a file's modification time. This is quite difficult.)

Here are some problems that really test your knowledge of eval and the shell's command-line processing rules. Solve these and you're a true bash hacker!

Advanced shell programmers sometimes use a little trick that includes eval: using the value of a variable as the name of another variable. In other words, you can give a shell script control over the names of variables to which it assigns values. The latest version of bash has this built in in the form of ${! varname}, where varname contains the name of another variable that will be the target of the operation. This is known as indirect expansion. How would you do this only using eval? (Hint: if $object equals "person", and $person is "alice", then you might think that you could type echo $$object and get the response alice. This doesn't actually work, but it's on the right track.)

You could use the above technique together with other eval tricks to implement new control structures for the shell. For example, see if you can write a script that emulates the behavior of a for loop in a conventional language like C or Pascal, i.e., a loop that iterates a fixed number of times, with a loop variable that steps from 1 to the number of iterations (or, for C fans, 0 to iterations-1). Call your script loop to avoid clashes with the keywords for and do.

The pushd, popd, and dirs functions that we built up in previous chapters can't handle directories with spaces in their names (because DIR_STACK uses a space as a delimiter). Use eval to overcome this limitation. (Hint: use eval to implement an array. Each array element is called array1, array2, ... arrayn, and each array element contains a directory name.)

(The following doesn't have that much to do with the material in this chapter per se, but it is a classic programming exercise:) Write the function alg2rpn used in the section on command blocks. Here's how to do this: Arithmetic expressions in algebraic notation have the form expr op expr, where each expr is either a number or another expression (perhaps in parentheses), and op is +, -, x, /, or % (remainder). In RPN, expressions have the form expr expr op. For example: the algebraic expression 2+3 is 2 3 + in RPN; the RPN equivalent of (2+3) x (9-5) is 2 3 + 9 5 - x. The main advantage of RPN is that it obviates the need for parentheses and operator precedence rules (e.g., x is evaluated before +). The dc program accepts standard RPN, but each expression should have "p" appended to it, which tells dc to print its result; e.g., the first example above should be given to dc as 2 3 + p.

You need to write a routine that converts algebraic notation to RPN. This should be (or include) a function that calls itself (a recursive function) whenever it encounters a subexpression. It is especially important that this function keep track of where it is in the input string and how much of the string it "eats up" during its processing. (Hint: make use of the pattern-matching operators discussed in Chapter 4 to ease the task of parsing input strings.) To make your life easier, don't worry about operator precedence for now; just convert to RPN from left to right: e.g., treat 3+4x5 as (3+4)x5 and 3x4+5 as (3x4)+5. This makes it possible for you to convert the input string on the fly, i.e., without having to read in the whole thing before doing any processing.

Enhance your solution to the previous exercise so that it supports operator precedence in the "usual" order: x, /, % (remainder) +, -. For example, treat 3+4x5 as 3+(4x5) and 3x4+5 as (3x4)+5.

Here is something else to really test your skills; write a graphics utility script, index, that takes a list of image files, reduces them in size and creates an "index" image. An index image is comprised of thumbnail-sized versions of the original images, placed neatly in columns and rows, and with a caption underneath (usually the name of the original file). Besides the list of files, you'll need some options, including the number of columns to create and the size of the thumbnail images. You might also like to include an option to specify the gap between each image. The new NetPBM utilities you'll need are pbmtext and pnmcat. You'll also need pnmscale and one or more of the conversion utilities, depending upon whether you decide to take in various formats (as we did for procimage) and what output format you decide on. pbmtext takes as an argument some text and converts the text into a PNM bitmap. pnmcat is a little more complex. Like cat, it concatenates things; in this case, images. You can specify as many PNM files as you like as arguments and pnmcat will put them together into one long image. By using the -lr and -tb options, you can specify whether you want the images to be placed one after the other going from left to right, or from top to bottom. The first option to pnmcat is the background color. It can be either -black for a black background, or -white for a white background. We suggest -white to match the pbmtext black text on a white background. You'll need to take each file, run the filename through pbmtext, and use pnmcat to place it underneath a scaled down version of the original image. Then you'll need to continue doing this for each file and use pnmcat to connect them together. In addition, you'll have to keep tabs on how many columns you have completed and when to start a new row. Note that you'll need to build up the rows individually and use pnmcat to connect them together. pnmcat won't do this for you automatically.

[7] Two obscure variations on this: the shell substitutes the current directory ($PWD) for ~+ and the previous directory ($OLDPWD) for ~-. In bash 2.0 there are two more: ~N+ and ~N-. These are replaced by the corresponding element in the directory stack as given by the dirs command.

[8] However, as we saw in Chapter 1, `\'' (i.e., single quote, backslash, single quote, single quote) acts pretty much like a single quote in the middle of a single-quoted string; e.g., `abc`\'`def' evaluates to abc`def.

[9] command removes alias lookup as a side effect. Because the first argument of command is no longer the first word that bash parses, it is not subjected to alias lookup.

[10] Unless bash has been compiled with a brain-dead value for the default. See Chapter 11 for how to change the default value.

[11] Note that the wrong test may still be run. If your current directory is the last in PATH you'll probably execute the system file test. test is not a good name for a program.

[12] The -d, -f, -p, and -s options are not available in versions of bash prior to 2.0.

[13] Be careful—it is possible to disable enable (enable -n enable). There is a compile-time option that allows builtin to act as an escape-hatch. For more details, see Chapter 11.

[14] You could actually do this without eval, by echoing commands to a temporary file and then "sourcing" that file with . filename. But that is much less efficient.

Chapter 8. Process Handling

The UNIX operating system built its reputation on a small number of concepts, all of which are simple yet powerful. We've seen most of them by now: standard input/output, pipes, text-filtering utilities, the tree-structured file system, and so on. UNIX also gained notoriety as the first small-computer operating system to give each user control over more than one process. We call this capability user-controlled multitasking.

You may not think that multitasking is a big deal. You're probably used to the idea of running a process in the background by putting an ampersand (&) at the end of the command line. You have also seen the idea of a subshell in Chapter 4, when we showed how shell scripts run.

In this chapter, we will cover most of bash's features that relate to multitasking and process handling in general. We say "most" because some of these features are, like the file descriptors we saw in the previous chapter, of interest only to low-level systems programmers.

We'll start out by looking at certain important primitives for identifying processes and for controlling them during login sessions and within shell scripts. Then we will move out to a higher-level perspective, looking at ways to get processes to communicate with each other. We'll look in more detail at concepts we've already seen, like pipes and subshells.

Don't worry about getting bogged down in low-level technical details about UNIX. We will provide only the technical information that is necessary to explain higher-level features, plus a few other tidbits designed to pique your curiosity. If you are interested in finding out more about these areas, refer to your UNIX Programmer's Manual or a book on UNIX internals that pertains to your version of UNIX. You might also find UNIX Power Tools of value.

We strongly recommend that you try out the examples in this chapter. The behavior of code that involves multiple processes is not as easy to understand on paper as most of the other examples in this book.

Process IDs and Job Numbers

UNIX gives all processes numbers, called process IDs, when they are created. You will notice that when you run a command in the background by appending & to it, the shell responds with a line that looks like this:

$ alice &[1] 93

In this example, 93 is the process ID for the alice process. The [1] is a job number assigned by the shell (not the operating system). What's the difference? Job numbers refer to background processes that are currently running under your shell, while process IDs refer to all processes currently running on the entire system, for all users. The term job basically refers to a command line that was invoked from your shell.

If you start up additional background jobs while the first one is still running, the shell will number them 2, 3, etc. For example:

$ duchess &[2] 102
$ hatter &[3] 104

Clearly, 1, 2, and 3 are easier to remember than 93, 102, and 104!

The shell includes job numbers in messages it prints when a background job completes:[1]

[1]+  Done                    alice

We'll explain what the plus sign means soon. If the job exits with non-zero status (see Chapter 5), the shell will indicate the exit status:[2]

[1]+  Exit 1                  alice

The shell prints other types of messages when certain abnormal things happen to background jobs; we'll see these later in this chapter.

[1] The messages are, by default, printed before the next prompt is displayed so as not to interrupt any output on the display. You can make the notification messages display immediately by using set -b.

[2] In POSIX mode, the message is slightly different: "[1]+ Done(1) alice". The number in parentheses is the exit status of the job. POSIX mode can be selected via the set command or by starting bash in POSIX mode. For further information, see Table 2-1 and Table 2-5

Job Control

Why should you care about process IDs or job numbers? Actually, you could probably get along fine through your UNIX life without ever referring to process IDs (unless you use a windowing workstation—as we'll see soon). Job numbers are more important, however: you can use them with the shell commands for job control.[3]

You already know the most obvious way of controlling a job: create one in the background with &. Once a job is running in the background, you can let it run to completion, bring it into the foreground, or send it a message called a signal.

Foreground and Background

The built-in command fg brings a background job into the foreground. Normally this means that the job will have control of your terminal or window and therefore will be able to accept your input. In other words, the job will begin to act as if you typed its command without the &.

If you have only one background job running, you can use fg without arguments, and the shell will bring that job into the foreground. But if you have several jobs running in the background, the shell will pick the one that you put into the background most recently. If you want some other job put into the foreground, you need to use the job's command name, preceded by a percent sign (%), or you can use its job number, also preceded by %, or its process ID without a percent sign. If you don't remember which jobs are running, you can use the command jobs to list them.

A few examples should make this clearer. Let's say you created three background jobs as above. Then if you type jobs, you will see this:

[1]   Running                 alice &
[2]-  Running                 duchess &
[3]+  Running                 hatter &

jobs has a few interesting options. jobs -l also lists process IDs:

[1]     93 Running                 alice &
[2]-   102 Running                 duchess &
[3]+   104 Running                 hatter &

The -p option tells jobs to list only process IDs:

93
102
104

(This could be useful with command substitution; see Task 8-1.) The -n option lists only those jobs whose status has changed since the shell last reported it—whether with a jobs command or otherwise. -r restricts the list to jobs that are running, while -s restricts the list to those jobs which are stopped, e.g., waiting for input from the keyboard.[4] Finally, you can use the -x option to execute a command. Any job number provided to the command will be substituted with the process ID of the job. For example, if alice is running in the background, then executing jobs -x echo %1 will print the process ID of alice.

If you type fg without an argument, the shell will put hatter in the foreground, because it was put in the background most recently. But if you type fg %duchess (or fg %2), duchess will go in the foreground.

You can also refer to the job most recently put in the background by %+. Similarly, %- refers to the next-most-recently backgrounded job (duchess in this case). That explains the plus and minus signs in the above: the plus sign shows the most recent job whose status has changed; the minus sign shows the next-most-recently invoked job.[5]

If more than one background job has the same command, then % command will distinguish between them by choosing the most recently invoked job (as you'd expect). If this isn't what you want, you need to use the job number instead of the command name. However, if the commands have different arguments, you can use %? string instead of % command. %? string refers to the job whose command contains the string. For example, assume you started these background jobs:

$ hatter mad &[1]     189
$ hatter teatime &[2]     190
$

Then you can use %?mad and %?teatime to refer to each of them, although actually %?ma and %?tea are sufficient to uniquely identify them.

Table 8-1 lists all of the ways to refer to background jobs. Given how infrequently people use job control commands, job numbers or command names are sufficient, and the other ways are superfluous.

Table 8-1. Ways to refer to background jobs

Reference

Background job

%N

Job number N

%string

Job whose command begins with string

%?string

Job whose command contains string

%+

Most recently invoked background job

%%

Same as above

%-

Second most recently invoked background job

Suspending a Job

Just as you can put background jobs into the foreground with fg, you can also put a foreground job into the background. This involves suspending a job, so that the shell regains control of your terminal.

To suspend a job, type CTRL-Z while it is running.[6] This is analogous to typing CTRL-C (or whatever your interrupt key is), except that you can resume the job after you have stopped it. When you type CTRL-Z, the shell responds with a message like this:

[1]+  Stopped                 command

Then it gives you your prompt back. To resume a suspended job so that it continues to run in the foreground, just type fg. If, for some reason, you put other jobs in the background after you typed CTRL-Z, use fg with a job name or number.

For example:

alice is running...CTRL-Z[1]+  Stopped                 alice
$ hatter &[2] 145
$ fg %alicealice resumes in the foreground...

The ability to suspend jobs and resume them in the foreground comes in very handy when you have a conventional terminal (as opposed to a windowing workstation) and you are using a text editor like vi on a file that needs to be processed. For example, if you are editing a file for the troff text processor, you can do the following:

$ vi myfileedit the file... CTRL-ZStopped [1] vi
$ troff myfiletroff reports an error$ fgvi comes back up in the same place in your file

Programmers often use the same technique when debugging source code.

You will probably also find it useful to suspend a job and resume it in the background instead of the foreground. You may start a command in the foreground (i.e., normally) and find that it takes much longer than you expected—for example, a grep, sort, or database query. You need the command to finish, but you would also like control of your terminal back so that you can do other work. If you type CTRL-Z followed by bg, you will move the job to the background.[7]

You can also suspend a job with CTRL-Y. This is slightly different from CTRL-Z in that the process is only stopped when it attempts to read input from the terminal.

[3] If you have an older version of UNIX, it is possible that your system does not support job control. This is particularly true for many systems derived from Xenix, System III, or early versions of System V. On such systems, bash does not have the fg and bg commands, job number arguments to kill and wait, typing CTRL-Z to suspend a job, or the TSTP signal.

[4] Options -r and -s are not available in bash prior to version 2.0.

[5] This is analogous to ~+ and ~- as references to the current and previous directory; see the footnote in Chapter 7. Also: %% is a synonym for %+.

[6] This assumes that the CTRL-Z key is set up as your suspend key; just as with CTRL-C and interrupts, this is conventional but by no means required.

[7] Be warned, however, that not all commands are "well-behaved" when you do this. Be especially careful with commands that run over a network on a remote machine; you may end up confusing the remote program.

Signals

We mentioned earlier that typing CTRL-Z to suspend a job is similar to typing CTRL-C to stop a job, except that you can resume the job later. They are actually similar in a deeper way: both are particular cases of the act of sending a signal to a process.

A signal is a message that one process sends to another when some abnormal event takes place or when it wants the other process to do something. Most of the time, a process sends a signal to a subprocess it created. You're undoubtedly already comfortable with the idea that one process can communicate with another through an I/O pipeline; think of a signal as another way for processes to communicate with each other. (In fact, any textbook on operating systems will tell you that both are examples of the general concept of interprocess communication, or IPC.[8])

Depending on the version of UNIX, there are two or three dozen types of signals, including a few that can be used for whatever purpose a programmer wishes. Signals have numbers (from 1 to the number of signals the system supports) and names; we'll use the latter. You can get a list of all the signals on your system, by name and number, by typing kill -l. Bear in mind, when you write shell code involving signals, that signal names are more portable to other versions of UNIX than signal numbers.

Control-Key Signals

When you type CTRL-C, you tell the shell to send the INT (for "interrupt") signal to the current job; CTRL-Z sends TSTP (on most systems, for "terminal stop"). You can also send the current job a QUIT signal by typing CTRL-\ (control-backslash); this is sort of like a "stronger" version of CTRL-C.[9] You would normally use CTRL-\ when (and only when) CTRL-C doesn't work.

As we'll see soon, there is also a "panic" signal called KILL that you can send to a process when even CTRL-\ doesn't work. But it isn't attached to any control key, which means that you can't use it to stop the currently running process. INT, TSTP, and QUIT are the only signals you can use with control keys.[10]

You can customize the control keys used to send signals with options of the stty command. These vary from system to system—consult your manpage for the command—but the usual syntax is stty signame char. signame is a name for the signal that, unfortunately, is often not the same as the names we use here. Table 1-7 in Chapter 1 lists stty names for signals found on all versions of UNIX. char is the control character, which you can give using the convention that ^(circumflex) represents "control." For example, to set your INT key to CTRL-X on most systems, use:

stty intr ^X

Now that we've told you how to do this, we should add that we don't recommend it. Changing your signal keys could lead to trouble if someone else has to stop a runaway process on your machine.

Most of the other signals are used by the operating system to advise processes of error conditions, like a bad machine code instruction, bad memory address, or division by zero, or "interesting" events such as a timer ("alarm") going off. The remaining signals are used for esoteric error conditions of interest only to low-level systems programmers; newer versions of UNIX have even more signal types.

kill

You can use the built-in shell command kill to send a signal to any process you created—not just the currently running job. kill takes as an argument the process ID, job number, or command name of the process to which you want to send the signal. By default, kill sends the TERM ("terminate") signal, which usually has the same effect as the INT signal you send with CTRL-C. But you can specify a different signal by using the signal name (or number) as an option, preceded by a dash.

kill is so named because of the nature of the default TERM signal, but there is another reason, which has to do with the way UNIX handles signals in general. The full details are too complex to go into here, but the following explanation should suffice.

Most signals cause a process that receives them to die; therefore, if you send any one of these signals, you "kill" the process that receives it. However, programs can be set up to Section 8.4 specific signals and take some other action. For example, a text editor would do well to save the file being edited before terminating when it receives a signal such as INT, TERM, or QUIT. Determining what to do when various signals come in is part of the fun of UNIX systems programming.

Here is an example of kill. Say you have an alice process in the background, with process ID 150 and job number 1, which needs to be stopped. You would start with this command:

$ kill %1

If you were successful, you would see a message like this:

[1]+  Terminated              alice

If you don't see this, then the TERM signal failed to terminate the job. The next step would be to try QUIT:

$ kill -QUIT %1

If that worked, you would see this message:

[1]+  Exit 131                alice

The 131 is the exit status returned by alice.[11] But if even QUIT doesn't work, the "last-ditch" method would be to use KILL:

$ kill -KILL %1

This produces the message:

[1]+  Killed                  alice

It is impossible for a process to Section 8.4 a KILL signal—the operating system should terminate the process immediately and unconditionally. If it doesn't, then either your process is in one of the "funny states" we'll see later in this chapter, or (far less likely) there's a bug in your version of UNIX.

Here's another example.

Task 8-1

Write a script called killalljobs that kills all background jobs.

The solution to this task is simple, relying on jobs -p:

kill "$@" $(jobs -p)

You may be tempted to use the KILL signal immediately, instead of trying TERM (the default) and QUIT first. Don't do this. TERM and QUIT are designed to give a process the chance to "clean up" before exiting, whereas KILL will stop the process, wherever it may be in its computation. Use KILL only as a last resort!

You can use the kill command with any process you create, not just jobs in the background of your current shell. For example, if you use a windowing system, then you may have several terminal windows, each of which runs its own shell. If one shell is running a process that you want to stop, you can kill it from another window—but you can't refer to it with a job number because it's running under a different shell. You must instead use its process ID.

ps

This is probably the only situation in which a casual user would need to know the ID of a process. The command ps gives you this information; however, it can give you lots of extra information as well.

ps is a complex command. It takes several options, some of which differ from one version of UNIX to another. To add to the confusion, you may need different options on different UNIX versions to get the same information! We will use options available on the two major types of UNIX systems, those derived from System V (such as many of the versions for Intel Pentium PCs, as well as IBM's AIX and Hewlett-Packard's HP/UX) and BSD (Mac OS X, SunOS, BSD/OS). If you aren't sure which kind of UNIX version you have, try the System V options first.

You can invoke ps in its simplest form without any options. In this case, it will print a line of information about the current login shell and any processes running under it (i.e., background jobs). For example, if you were to invoke three background jobs, as we saw earlier in the chapter, the ps command on System V-derived versions of UNIX would produce output that looks something like this:

   PID TTY      TIME COMD
   146 pts/10   0:03 -bash
  2349 pts/10   0:03 alice
  2367 pts/10   0:17 hatter
  2389 pts/10   0:09 duchess
  2390 pts/10   0:00 ps

The output on BSD-derived systems looks like this:

   PID TT STAT  TIME COMMAND
   146 10 S     0:03 /bin/bash
  2349 10 R     0:03 alice
  2367 10 D     0:17 hatter teatime
  2389 10 R     0:09 duchess
  2390 10 R     0:00 ps

(You can ignore the STAT column.) This is a bit like the jobs command. PID is the process ID; TTY (or TT) is the terminal (or pseudo-terminal, if you are using a windowing system) the process was invoked from; TIME is the amount of processor time (not real or "wall clock" time) the process has used so far; COMD (or COMMAND) is the command. Notice that the BSD version includes the command's arguments, if any; also notice that the first line reports on the parent shell process, and in the last line, ps reports on itself.

ps without arguments lists all processes started from the current terminal or pseudo-terminal. But since ps is not a shell command, it doesn't correlate process IDs with the shell's job numbers. It also doesn't help you find the ID of the runaway process in another shell window.

To get this information, use ps -a (for "all"); this lists information on a different set of processes, depending on your UNIX version.

System V

Instead of listing all processes that were started under a specific terminal, ps -a on System V-derived systems lists all processes associated with any terminal that aren't group leaders. For our purposes, a "group leader" is the parent shell of a terminal or window. Therefore, if you are using a windowing system, ps -a lists all jobs started in all windows (by all users), but not their parent shells.

Assume that, in the previous example, you have only one terminal or window. Then ps -a will print the same output as plain ps except for the first line, since that's the parent shell. This doesn't seem to be very useful.

But consider what happens when you have multiple windows open. Let's say you have three windows, all running terminal emulators like xterm for the X Window System. You start background jobs alice, duchess, and hatter in windows with pseudo-terminal numbers 1, 2, and 3, respectively. This situation is shown in Figure 8-1.

Figure 8-1. Background jobs in multiple windows

Assume you are in the uppermost window. If you type ps, you will see something like this:

 PID TTY      TIME COMD
 146 pts/1    0:03 bash
2349 pts/1    0:03 alice
2390 pts/1    0:00 ps

But if you type ps -a, you will see this:

 PID TTY      TIME COMD
 146 pts/1    0:03 bash
2349 pts/1    0:03 alice
2367 pts/2    0:17 duchess
2389 pts/3    0:09 hatter
2390 pts/1    0:00 ps

Now you should see how ps -a can help you track down a runaway process. If it's hatter, you can type kill 2389. If that doesn't work, try kill -QUIT 2389, or in the worst case, kill -KILL 2389.

BSD

On BSD-derived systems, ps -a lists all jobs that were started on any terminal; in other words, it's a bit like concatenating the results of plain ps for every user on the system. Given the above scenario, ps -a will show you all processes that the System V version shows, plus the group leaders (parent shells).

Unfortunately, ps -a (on any version of UNIX) will not report processes that are in certain conditions where they "forget" things like what shell invoked them and what terminal they belong to. Such processes are known as "zombies" or "orphans." If you have a serious runaway process problem, it's possible that the process has entered one of these states.

Let's not worry about why or how a process gets this way. All you need to understand is that the process doesn't show up when you type ps -a. You need another option to ps to see it: on System V, it's ps -e ("everything"), whereas on BSD, it's ps -ax.

These options tell ps to list processes that either weren't started from terminals or "forgot" what terminal they were started from. The former category includes lots of processes that you probably didn't even know existed: these include basic processes that run the system and so-called daemons (pronounced "demons") that handle system services like mail, printing, network filesystems, etc.

In fact, the output of ps -e or ps -ax is an excellent source of education about UNIX system internals, if you're curious about them. Run the command on your system and, for each line of the listing that looks interesting, invoke man on the process name or look it up in the UNIX Programmer's Manual for your system.

User shells and processes are listed at the very bottom of ps -e or ps -ax output; this is where you should look for runaway processes. Notice that many processes in the listing have ? instead of a terminal. Either these aren't supposed to have one (such as the basic daemons) or they're runaways. Therefore it's likely that if ps -a doesn't find a process you're trying to kill, ps -e (or ps -ax) will list it with ? in the TTY (or TT) column. You can determine which process you want by looking at the COMD (or COMMAND) column.

[8] Pipes and signals were the only IPC mechanisms in early versions of UNIX. More modern versions like System V and BSD have additional mechanisms, such as sockets, named pipes, and shared memory. Named pipes are accessible to shell programmers through the mknod(1) command, which is beyond the scope of this book.

[9] CTRL-\ can also cause the shell to leave a file called core in your current directory. This file contains an image of the process to which you sent the signal; a programmer could use it to help debug the program that was running. The file's name is a (very) old-fashioned term for a computer's memory. Other signals leave these "core dumps" as well; unless you require them, or someone else does, just delete them.

[10] Some BSD-derived systems have additional control-key signals.

[11] When a shell script is sent a signal, it exits with status 128+N, where N is the number of the signal it received. In this case, alice is a shell script, and QUIT happens to be signal number 3.

trap

We've been discussing how signals affect the casual user; now let's talk a bit about how shell programmers can use them. We won't go into too much depth about this, because it's really the domain of systems programmers.

We mentioned above that programs in general can be set up to Section 8.4 specific signals and process them in their own way. The trap built-in command lets you do this from within a shell script. trap is most important for "bullet-proofing" large shell programs so that they react appropriately to abnormal events—just as programs in any language should guard against invalid input. It's also important for certain systems programming tasks, as we'll see in the next chapter.

The syntax of trap is:

            trap cmd sig1 sig2 ...

That is, when any of sig1, sig2, etc., are received, run cmd, then resume execution. After cmd finishes, the script resumes execution just after the command that was interrupted.[12]

Of course, cmd can be a script or function. The sigs can be specified by name or by number. You can also invoke trap without arguments, in which case the shell will print a list of any traps that have been set, using symbolic names for the signals.

Here's a simple example that shows how trap works. Suppose we have a shell script called loop with this code:

while true; do
    sleep 60
done

This will just pause for 60 seconds (the sleep command) and repeat indefinitely. true is a "do-nothing" command whose exit status is always 0.[13] Try typing in this script. Invoke it, let it run for a little while, then type CTRL-C (assuming that is your interrupt key). It should stop, and you should get your shell prompt back.

Now insert this line at the beginning of the script:

trap "echo 'You hit control-C!'" INT

Invoke the script again. Now hit CTRL-C. The odds are overwhelming that you are interrupting the sleep command (as opposed to true). You should see the message "You hit control-C!", and the script will not stop running; instead, the sleep command will abort, and it will loop around and start another sleep. Hit CTRL-Z to get it to stop and then type kill %1.

Next, run the script in the background by typing loop &. Type kill %loop (i.e., send it the TERM signal); the script will terminate. Add TERM to the trap command, so that it looks like this:

trap "echo 'You hit control-C!'" INT TERM

Now repeat the process: run it in the background and type kill %loop. As before, you will see the message and the process will keep on running. Type kill -KILL %loop to stop it.

Notice that the message isn't really appropriate when you use kill. We'll change the script so it prints a better message in the kill case:

trap "echo 'You hit control-C!'" INT
trap "echo 'You tried to kill me!'" TERM

while true; do
    sleep 60
done

Now try it both ways: in the foreground with CTRL-C and in the background with kill. You'll see different messages.

Traps and Functions

The relationship between traps and shell functions is straightforward, but it has certain nuances that are worth discussing. The most important thing to understand is that functions are considered part of the shell that invokes them. This means that traps defined in the invoking shell will be recognized inside the function, and more importantly, any traps defined in the function will be recognized by the invoking shell once the function has been called. Consider this code:

settrap ( ) {
    trap "echo 'You hit control-C!'" INT
}

settrap
while true; do
    sleep 60
done

If you invoke this script and hit your interrupt key, it will print "You hit control-C!" In this case the trap defined in settrap still exists when the function exits.

Now consider:

loop ( ) {
    trap "echo 'How dare you!'" INT
    while true; do
        sleep 60
    done
}

trap "echo 'You hit control-C!'" INT
loop

When you run this script and hit your interrupt key, it will print "How dare you!" In this case the trap is defined in the calling script, but when the function is called the trap is redefined. The first definition is lost. A similar thing happens with:

loop ( ) {
    trap "echo 'How dare you!'" INT
}

trap "echo 'You hit control-C!'" INT
loop
while true; do
    sleep 60
done

Once again, the trap is redefined in the function; this is the definition used once the loop is entered.

We'll now show a more practical example of traps.

Task 8-2

As part of an electronic mail system, write the shell code that lets a user compose a message.

The basic idea is to use cat to create the message in a temporary file and then hand the file's name off to a program that actually sends the message to its destination. The code to create the file is very simple:

msgfile=/tmp/msg$$
cat > $msgfile

Since cat without an argument reads from the standard input, this will just wait for the user to type a message and end it with the end-of-text character CTRL-D.

Process ID Variables and Temporary Files

The only thing new about this script is $$ in the filename expression. This is a special shell variable whose value is the process ID of the current shell.

To see how $$ works, type ps and note the process ID of your shell process (bash). Then type echo "$$"; the shell will respond with that same number. Now type bash to start a subshell, and when you get a prompt, repeat the process. You should see a different number, probably slightly higher than the last one.

A related built-in shell variable is ! (i.e., its value is $!), which contains the process ID of the most recently invoked background job. To see how this works, invoke any job in the background and note the process ID printed by the shell next to [1]. Then type echo "$!"; you should see the same number.

To return to our mail example: since all processes on the system must have unique process IDs, $$ is excellent for constructing names of temporary files.

The directory /tmp is conventionally used for temporary files. Many systems also have another directory, /var/tmp, for the same purpose.

Nevertheless, a program should clean up such files before it exits, to avoid taking up unnecessary disk space. We could do this in our code very easily by adding the line rm $msgfile after the code that actually sends the message. But what if the program receives a signal during execution? For example, what if a user changes her mind about sending the message and hits CTRL-C to stop the process? We would need to clean up before exiting. We'll emulate the actual UNIX mail system by saving the message being written in a file called dead.letter in the current directory. We can do this by using trap with a command string that includes an exit command:

trap 'mv $msgfile dead.letter; exit' INT TERM
msgfile=/tmp/msg$$
cat > $msgfile
# send the contents of $msgfile to the specified mail address...
rm $msgfile

When the script receives an INT or TERM signal, it will remove the temp file and then exit. Note that the command string isn't evaluated until it needs to be run, so $msgfile will contain the correct value; that's why we surround the string in single quotes.

But what if the script receives a signal before msgfile is created—unlikely though that may be? Then mv will try to rename a file that doesn't exist. To fix this, we need to test for the existence of the file $msgfile before trying to delete it. The code for this is a bit unwieldy to put in a single command string, so we'll use a function instead:

function cleanup {
    if [ -e $msgfile ]; then
          mv $msgfile dead.letter
    fi
    exit
}

trap cleanup INT TERM

msgfile=/tmp/msg$$
cat > $msgfile
# send the contents of $msgfile to the specified mail address...
rm $msgfile

Ignoring Signals

Sometimes a signal comes in that you don't want to do anything about. If you give the null string ("" or `') as the command argument to trap, then the shell will effectively ignore that signal. The classic example of a signal you may want to ignore is HUP (hangup). This can occur on some UNIX systems when a hangup (disconnection while using a modem—literally "hanging up") or some other network outage takes place.

HUP has the usual default behavior: it will kill the process that receives it. But there are bound to be times when you don't want a background job to terminate when it receives a hangup signal.

To do this, you could write a simple function that looks like this:

function ignorehup {
    trap "" HUP
    eval "$@"
}

We write this as a function instead of a script for reasons that will become clearer when we look in detail at subshells at the end of this chapter.

Actually, there is a UNIX command called nohup that does precisely this. The start script from the last chapter could include nohup:

eval nohup "$@" > logfile 2>&1 &

This prevents HUP from terminating your command and saves its standard and error output in a file. Actually, the following is just as good:

nohup "$@" > logfile 2>&1 &

If you understand why eval is essentially redundant when you use nohup in this case, then you have a firm grasp on the material in the previous chapter. Note that if you don't specify a redirection for any output from the command, nohup places it in a file called nohup.out.

disown

Another way to ignore the HUP signal is with the disown built-in.[14] disown takes as an argument a job specification, such as the process ID or job ID, and removes the process from the list of jobs. The process is effectively "disowned" by the shell from that point on, i.e., you can only refer to it by its process ID since it is no longer in the job table.

disown's -h option performs the same function as nohup; it specifies that the shell should stop the hangup signal from reaching the process under certain circumstances. Unlike nohup, it is up to you to specify where the output from the process is to go.

disown also provides two options which can be of use. -a with no other arguments applies the operation to all jobs owned by the shell. The -r option with does the same but only for currently running jobs.

Resetting Traps

Another "special case" of the trap command occurs when you give a dash (-) as the command argument. This resets the action taken when the signal is received to the default, which usually is termination of the process.

As an example of this, let's return to Task 8-2, our mail program. After the user has finished sending the message, the temporary file is erased. At that point, since there is no longer any need to clean up, we can reset the signal trap to its default state. The code for this, apart from function definitions, is:

trap abortmsg INT
trap cleanup TERM

msgfile=/tmp/msg$$
cat > $msgfile
# send the contents of $msgfile to the specified mail address...
rm $msgfile

trap - INT TERM

The last line of this code resets the handlers for the INT and TERM signals.

At this point you may be thinking that you could get seriously carried away with signal handling in a shell script. It is true that "industrial strength" programs devote considerable amounts of code to dealing with signals. But these programs are almost always large enough so that the signal-handling code is a tiny fraction of the whole thing. For example, you can bet that the real UNIX mail system is pretty darn bullet-proof.

However, you will probably never write a shell script that is complex enough, and that needs to be robust enough, to merit lots of signal handling. You may write a prototype for a program as large as mail in shell code, but prototypes by definition do not need to be bullet-proofed.

Therefore, you shouldn't worry about putting signal-handling code in every 20-line shell script you write. Our advice is to determine if there are any situations in which a signal could cause your program to do something seriously bad and add code to deal with those contingencies. What is "seriously bad"? Well, with respect to the above examples, we'd say that the case where HUP causes your job to terminate is seriously bad, while the temporary file situation in our mail program is not.

[12] This is what usually happens. Sometimes the command currently running will abort (sleep acts like this, as we'll see soon); at other times it will finish running. Further details are beyond the scope of this book.

[13] This command is the same as the built-in shell no-op command ":".

[14] disown is not available in versions of bash prior to 2.0.

Coroutines

We've spent the last several pages on almost microscopic details of process behavior. Rather than continue our descent into the murky depths, we'll revert to a higher-level view of processes.

Earlier in this chapter, we covered ways of controlling multiple simultaneous jobs within an interactive login session; now we'll consider multiple process control within shell programs. When two (or more) processes are explicitly programmed to run simultaneously and possibly communicate with each other, we call them coroutines.

This is actually nothing new: a pipeline is an example of coroutines. The shell's pipeline construct encapsulates a fairly sophisticated set of rules about how processes interact with each other. If we take a closer look at these rules, we'll be better able to understand other ways of handling coroutines—most of which turn out to be simpler than pipelines.

When you invoke a simple pipeline—say, ls | more—the shell invokes a series of UNIX primitive operations, or system calls. In effect, the shell tells UNIX to do the following things; in case you're interested, we include in parentheses the actual system call used at each step:

Create two subprocesses, which we'll call P1 and P2 (the fork system call).

Set up I/O between the processes so that P1's standard output feeds into P2's standard input (pipe).

Start /bin/ls in process P1 (exec).

Start /bin/more in process P2 (exec).

Wait for both processes to finish (wait).

You can probably imagine how the above steps change when the pipeline involves more than two processes.

Now let's make things simpler. We'll see how to get multiple processes to run at the same time if the processes do not need to communicate. For example, we want the processes alice and hatter to run as coroutines, without communication, in a shell script. Our initial solution would be this:

alice &
hatter

Assume for the moment that hatter is the last command in the script. The above will work—but only if alice finishes first. If alice is still running when the script finishes, then it becomes an orphan, i.e., it enters one of the "funny states" we mentioned earlier in this chapter. Never mind the details of orphanhood; just believe that you don't want this to happen, and if it does, you may need to use the "runaway process" method of stopping it, discussed earlier in this chapter.

wait

There is a way of making sure the script doesn't finish before alice does: the built-in command wait. Without arguments, wait simply waits until all background jobs have finished. So to make sure the above code behaves properly, we would add wait, like this:

alice &
hatter
wait

Here, if hatter finishes first, the parent shell will wait for alice to finish before finishing itself.

If your script has more than one background job and you need to wait for specific ones to finish, you can give wait the process ID of the job.

However, you will probably find that wait without arguments suffices for all coroutines you will ever program. Situations in which you would need to wait for specific background jobs are quite complex and beyond the scope of this book.

Advantages and Disadvantages of Coroutines

In fact, you may be wondering why you would ever need to program coroutines that don't communicate with each other. For example, why not just run hatter after alice in the usual way? What advantage is there in running the two jobs simultaneously?

Even if you are running on a computer with only one processor (CPU), then there may be a performance advantage.

Roughly speaking, you can characterize a process in terms of how it uses system resources in three ways: whether it is CPU-intensive (e.g., does lots of number crunching), I/O-intensive (does a lot of reading or writing to the disk), or interactive (requires user intervention).

We already know from Chapter 1 that it makes no sense to run an interactive job in the background. But apart from that, the more two or more processes differ with respect to these three criteria, the more advantage there is in running them simultaneously. For example, a number-crunching statistical calculation would do well when running at the same time as a long, I/O-intensive database query.

On the other hand, if two processes use resources in similar ways, it may even be less efficient to run them at the same time as it would be to run them sequentially. Why? Basically, because under such circumstances, the operating system often has to "time-slice" the resource(s) in contention.

For example, if both processes are "disk hogs," the operating system may enter a mode where it constantly switches control of the disk back and forth between the two competing processes; the system ends up spending at least as much time doing the switching as it does on the processes themselves. This phenomenon is known as thrashing; at its most severe, it can cause a system to come to a virtual standstill. Thrashing is a common problem; system administrators and operating system designers both spend lots of time trying to minimize it.

Parallelization

If you have a computer with multiple CPUs you should be less concerned about thrashing. Furthermore, coroutines can provide dramatic increases in speed on this type of machine, which is often called a parallel computer; analogously, breaking up a process into coroutines is sometimes called parallelizing the job.

Normally, when you start a background job on a multiple-CPU machine, the computer will assign it to the next available processor. This means that the two jobs are actually—not just metaphorically—running at the same time.

In this case, the running time of the coroutines is essentially equal to that of the longest-running job plus a bit of overhead, instead of the sum of the runtimes of all processes (although if the CPUs all share a common disk drive, the possibility of I/O-related thrashing still exists). In the best case—all jobs having the same runtime and no I/O contention—you get a speedup factor equal to the number of CPUs.

Parallelizing a program is often not easy; there are several subtle issues involved and there's plenty of room for error. Nevertheless, it's worthwhile to know how to parallelize a shell script whether or not you have a parallel machine, especially since such machines are becoming more and more common.

We'll show how to do this—and give you an idea of some problems involved—by means of a simple task whose solution is amenable to parallelization.

Task 8-3

Write a utility that allows you to make multiple copies of a file at the same time.

We'll call this script mcp. The command mcp filename dest1 dest2 ... should copy filename to all of the destinations given. The code for this should be fairly obvious:

file=$1
shift
for dest in "$@"; do
    cp $file $dest
done

Now let's say we have a parallel computer and we want this command to run as fast as possible. To parallelize this script, it's a simple matter of firing off the cp commands in the background and adding a wait at the end:

file=$1
shift
for dest in "$@"; do
    cp $file $dest &
done
wait

Simple, right? Well, there is one little problem: what happens if the user specifies duplicate destinations? If you're lucky, the file just gets copied to the same place twice. Otherwise, the identical cp commands will interfere with each other, possibly resulting in a file that contains two interspersed copies of the original file. In contrast, if you give the regular cp command two arguments that point to the same file, it will print an error message and do nothing.

To fix this problem, we would have to write code that checks the argument list for duplicates. Although this isn't too hard to do (see the exercises at the end of this chapter), the time it takes that code to run might offset any gain in speed from parallelization; furthermore, the code that does the checking detracts from the simple elegance of the script.

As you can see, even a seemingly trivial parallelization task has problems resulting from multiple processes that have concurrent access to a given system resource (a file in this case). Such problems, known as concurrency control issues, become much more difficult as the complexity of the application increases. Complex concurrent programs often have much more code for handling the special cases than for the actual job the program is supposed to do!

Therefore, it shouldn't surprise you that much research has been and is being done on parallelization, the ultimate goal being to devise a tool that parallelizes code automatically. (Such tools do exist; they usually work in the confines of some narrow subset of the problem.) Even if you don't have access to a multiple-CPU machine, parallelizing a shell script is an interesting exercise that should acquaint you with some of the issues that surround coroutines.

Subshells

To conclude this chapter, we will look at a simple type of interprocess relationship: that of a subshell with its parent shell. We saw in Chapter 3 that whenever you run a shell script, you actually invoke another copy of the shell that is a subprocess of the main, or parent, shell process. Now let's look at subshells in more detail.

Subshell Inheritance

The most important things you need to know about subshells are what characteristics they get, or inherit, from their parents. These are as follows:

The current directory

Environment variables

Standard input, output, and error, plus any other open file descriptors

Signals that are ignored

Just as important are the things that a subshell does not inherit from its parent:

Shell variables, except environment variables and those defined in the environment file (usually .bashrc)

Handling of signals that are not ignored

We covered some of this in Chapter 3, but these points are common sources of confusion, so they bear repeating.

Nested Subshells

Subshells need not be in separate scripts; you can also start a subshell within the same script (or function) as the parent. You do this in a manner very similar to the command blocks we saw in the last chapter. Just surround some shell code with parentheses (instead of curly brackets), and that code will run in a subshell. We'll call this a nested subshell.

For example, here is the calculator program from the last chapter, with a subshell instead of a command block:

( while read line; do
      echo "$(alg2rpn $line)"
  done
) | dc

The code inside the parentheses will run as a separate process. This is usually less efficient than a command block. The differences in functionality between subshells and command blocks are very few; they primarily pertain to issues of scope, i.e., the domains in which definitions of things like shell variables and signal traps are known. First, code inside a nested subshell obeys the above rules of subshell inheritance, except that it knows about variables defined in the surrounding shell; in contrast, think of blocks as code units that inherit everything from the outer shell. Second, variables and traps defined inside a command block are known to the shell code after the block, whereas those defined in a subshell are not.

For example, consider this code:

{
    hatter=mad
    trap "echo 'You hit CTRL-C!'" INT
}
while true; do
    echo "\$hatter is $hatter"
    sleep 60
done

If you run this code, you will see the message $hatter is mad every 60 seconds, and if you hit CTRL-C, you will see the message, You hit CTRL-C!. You will need to hit CTRL-Z to stop it (don't forget to kill it with kill %+). Now let's change it to a nested subshell:

(
    hatter=mad
    trap "echo 'You hit CTRL-C!'" INT
)
while true; do
    echo "\$hatter is $hatter"
    sleep 60
done

If you run this, you will see the message $hatter is; the outer shell doesn't know about the subshell's definition of hatter and therefore thinks it's null. Furthermore, the outer shell doesn't know about the subshell's trap of the INT signal, so if you hit CTRL-C, the script will terminate.

If a language supports code nesting, then it's considered desirable that definitions inside a nested unit have a scope limited to that nested unit. In other words, nested subshells give you better control than command blocks over the scope of variables and signal traps. Therefore, we feel that you should use subshells instead of command blocks if they are to contain variable definitions or signal traps—unless efficiency is a concern.

Process Substitution

A unique but rarely used feature of bash is process substitution. Let's say that you had two versions of a program that produced large quantities of output. You want to see the differences between the output from each version. You could run the two programs, redirecting their output to files, and then use the cmp utility to see what the differences were.

Another way would be to use process substitution. There are two forms of this substitution. One is for input to a process: >(list); the other is for output from a process: <(list). list is a process that has its input or output connected to something via a named pipe. A named pipe is simply a temporary file that acts like a pipe with a name.

In our case, we could connect the outputs of the two programs to the input of cmp via named pipes:

cmp <(prog1) <(prog2)

prog1 and prog2 are run concurrently and connect their outputs to named pipes. cmp reads from each of the pipes and compares the information, printing any differences as it does so.

This chapter has covered a lot of territory. Here are some exercises that should help you make sure you have a firm grasp on the material. Don't worry if you have trouble with the last one; it's especially difficult.

Write a shell script called pinfo that combines the jobs and ps commands by printing a list of jobs with their job numbers, corresponding process IDs, running times, and full commands.

Take a non-trivial shell script and "bullet-proof" it with signal traps.

Take a non-trivial shell script and parallelize it as much as possible.

Write the code that checks for duplicate arguments to the mcp script. Bear in mind that different pathnames can point to the same file. (Hint: if $i is "1", then eval `echo \${$i}' prints the first command-line argument. Make sure you understand why.)

Chapter 9. Debugging Shell Programs

We hope that we have convinced you that bash can be used as a serious UNIX programming environment. It certainly has enough features, control structures, etc. But another essential part of a programming environment is a set of powerful, integrated support tools. For example, there is a wide assortment of screen editors, compilers, debuggers, profilers, cross-referencers, etc., for languages like C and C++. If you program in one of these languages, you probably take such tools for granted, and you would undoubtedly cringe at the thought of having to develop code with, say, the ed editor and the adb machine-language debugger.

But what about programming support tools for bash? Of course, you can use any editor you like, including vi and emacs. And because the shell is an interpreted language, you don't need a compiler.[1] But there are no other tools available.

This chapter looks at some useful features that you can use to debug shell programs. We'll look at how you can utilize them in the first part of this chapter. We'll then look at some powerful new features of bash, not present in most Bourne shell workalikes, which will help in building a shell script debugging tool. At the end of the chapter, we'll show step by step how to build a debugger for bash. The debugger, called bashdb, is a basic yet functional program that will not only serve as an extended example of various shell programming techniques, but will also provide you with a useful tool for examining the workings of your own shell scripts.

Basic Debugging Aids

What sort of functionality do you need to debug a program? At the most empirical level, you need a way of determining what is causing your program to behave badly, and where the problem is in the code. You usually start with an obvious what (such as an error message, inappropriate output, infinite loop, etc.), try to work backwards until you find a what that is closer to the actual problem (e.g., a variable with a bad value, a bad option to a command), and eventually arrive at the exact where in your program. Then you can worry about how to fix it.

Notice that these steps represent a process of starting with obvious information and ending up with often obscure facts gleaned through deduction and intuition. Debugging aids make it easier to deduce and intuit by providing relevant information easily or even automatically, preferably without modifying your code.

The simplest debugging aid (for any language) is the output statement, echo, in the shell's case. Indeed, old-time programmers debugged their FORTRAN code by inserting WRITE cards into their decks. You can debug by putting lots of echo statements in your code (and removing them later), but you will have to spend lots of time narrowing down not only what exact information you want but also where you need to see it. You will also probably have to wade through lots and lots of output to find the information you really want.

Set Options

Luckily, the shell has a few basic features that give you debugging functionality beyond that of echo. The most basic of these are options to the set -o command (as covered in Chapter 3). These options can also be used on the command line when running a script, as Table 9-1 shows.

Table 9-1. Debugging options

set -o option

Command-line option

Action

noexec

-n

Don't run commands; check for syntax errors only

verbose

-v

Echo commands before running them

xtrace

-x

Echo commands after command-line processing

The verbose option simply echoes (to standard error) whatever input the shell gets. It is useful for finding the exact point at which a script is bombing. For example, assume your script looks like this:

alice
hatter
march
teatime
treacle
well

None of these commands is a standard UNIX program, and each does its work silently. Say the script crashes with a cryptic message like "segmentation violation." This tells you nothing about which command caused the error. If you type bash -v scriptname, you might see this:

alice
hatter
march
segmentation violation
teatime
treacle
well

Now you know that march is the probable culprit—though it is also possible that march bombed because of something it expected alice or hatter to do (e.g., create an input file) that they did incorrectly.

The xtrace option is more powerful: it echoes command lines after they have been through parameter substitution, command substitution, and the other steps of command-line processing (as listed in Chapter 7). For example:

.ps 8
$ set -o xtrace$ alice=girl+ alice=girl
$ echo "$alice"+ echo girl
girl
$ ls -l $(type -path vi)++ type -path vi
+ ls -F -l /usr/bin/vi
lrwxrwxrwx   1 root     root      5 Jul 26 20:59 /usr/bin/vi -> elvis*
$

As you can see, xtrace starts each line it prints with + (each + representing a level of expansion). This is actually customizable: it's the value of the built-in shell variable PS4. So if you set PS4 to "xtrace—>" (e.g., in your .bash_profile or .bashrc), then you'll get xtrace listings that look like this:

.ps 8
$ ls -l $(type -path vi)xxtrace--> type -path vi
xtrace--> ls -l /usr/bin/vi
lrwxrwxrwx   1 root     root      5 Jul 26 20:59 /usr/bin/vi -> elvis*
$

Notice that for multiple levels of expansion, only the first character of PS4 is printed. This makes the output more readable.

An even better way of customizing PS4 is to use a built-in variable we haven't seen yet: LINENO, which holds the number of the currently running line in a shell script.[2] Put this line in your .bash_profile or environment file:

PS4='line $LINENO: '

We use the same technique as we did with PS1 in Chapter 3: using single quotes to postpone the evaluation of the string until each time the shell prints the prompt. This will print messages of the form line N: in your trace output. You could even include the name of the shell script you're debugging in this prompt by using the positional parameter $0:

PS4='$0 line $LINENO: '

As another example, say you are trying to track down a bug in a script called alice that contains this code:

dbfmq=$1.fmq
...
fndrs=$(cut -f3 -d' ' $dfbmq)

You type alice teatime to run it in the normal way, and it hangs. Then you type bash -x alice teatime, and you see this:

+ dbfmq=teatime.fmq
...
+ + cut -f3 -d

It hangs again at this point. You notice that cut doesn't have a filename argument, which means that there must be something wrong with the variable dbfmq. But it has executed the assignment statement dbfmq=teatime.fmq properly... ah-hah! You made a typo in the variable name inside the command substitution construct.[3] You fix it, and the script works properly.

The last option is noexec, which reads in the shell script and checks for syntax errors, but doesn't execute anything. It's worth using if your script is syntactically complex (lots of loops, command blocks, string operators, etc.) and the bug has side effects (like creating a large file or hanging up the system).

You can turn on these options with set -o option in your shell scripts, and, as explained in Chapter 3, turn them off with set +o option. For example, if you're debugging a chunk of code, you can precede it with set -o xtrace to print out the executed commands, and end the chunk with set +o xtrace.

Note, however, that once you have turned noexec on, you won't be able to turn it off; a set +o noexec will never be executed.

Fake Signals

Fake signals are more sophisticated set of debugging aids. They can be used in trap statements to get the shell to act under certain conditions. Recall from the previous chapter that trap allows you to install some code that runs when a particular signal is sent to your script.

Fake signals work in the same way, but they are generated by the shell itself, as opposed to the other signals which are generated externally. They represent runtime events that are likely to be of interest to debuggers—both human ones and software tools—and can be treated just like real signals within shell scripts. Table 9-2 lists the four fake signals available in bash.

Table 9-2. Fake signals

Fake signal

Sent when

EXIT

The shell exits from script

ERR

A command returning a non-zero exit status

DEBUG

The shell has executed a statement[4]

RETURN

A shell function or a script executed with the . or source builtins finishes executing[5]

[4] The DEBUG signal is not available in bash versions prior to 2.0.

[5] The RETURN signal is not available in bash versions prior to 3.0.

EXIT

The EXIT trap, when set, will run its code whenever the script within which it was set exits.[6]

Here's a simple example:

trap 'echo exiting from the script' EXIT
echo 'start of the script'

If you run this script, you will see this output:

start of the script
exiting from the script

In other words, the script starts by setting the trap for its own exit, then prints a message. The script then exits, which causes the shell to generate the signal EXIT, which in turn runs the code echo exiting from the script.

An EXIT trap occurs no matter how the script exits—whether normally (by finishing the last statement), by an explicit exit or return statement, or by receiving a "real" signal such as INT or TERM. Consider this inane number-guessing program:

trap 'echo Thank you for playing!' EXIT

magicnum=$(($RANDOM%10+1))
echo 'Guess a number between 1 and 10:'
while read -p 'Guess: ' guess ; do
    sleep 4
    if [ "$guess" = $magicnum ]; then
        echo 'Right!'
        exit
    fi
    echo 'Wrong!'
done

This program picks a number between 1 and 10 by getting a random number (the built-in variable RANDOM), extracting the last digit (the remainder when divided by 10), and adding 1. Then it prompts you for a guess, and after 4 seconds, it will tell you if you guessed right.

If you did, the program will exit with the message, "Thank you for playing!", i.e., it will run the EXIT trap code. If you were wrong, it will prompt you again and repeat the process until you get it right. If you get bored with this little game and hit CTRL-C or CTRL-D while waiting for it to tell you whether you were right, you will also see the message.

The EXIT trap is especially useful when you want to print out the values of variables at the point that your script exits. For example, by printing the value of loop counter variables, you can find the most appropriate places in a complicated script, with many nested for loops, to enable xtrace or place debug output.

ERR

The fake signal ERR enables you to run code whenever a command in the surrounding script or function exits with non-zero status. Trap code for ERR can take advantage of the built-in variable ?, which holds the exit status of the previous command. It survives the trap and is accessible at the beginning of the trap-handling code.

A simple but effective use of this is to put the following code into a script you want to debug:

function errtrap {
    es=$?
    echo "ERROR: Command exited with status $es."
}

trap errtrap ERR

The first line saves the nonzero exit status in the local variable es.

For example, if the shell can't find a command, it returns status 127. If you put the code in a script with a line of gibberish (like "nhbdeuje"), the shell responds with:

scriptname: line N: nhbdeuje:  command not found
ERROR: command exited with status 127.

N is the number of the line in the script that contains the bad command. In this case, the shell prints the line number as part of its own error-reporting mechanism, since the error was a command that the shell could not find. But if the nonzero exit status comes from another program, the shell doesn't report the line number. For example:

function errtrap {
    es=$?
    echo "ERROR: Command exited with status $es."
}

trap errtrap ERR

function bad {
    return 17
}

bad

This only prints ERROR: Command exited with status 17.

It would obviously be an improvement to include the line number in this error message. The built-in variable LINENO exists, but if you use it inside a function, it evaluates to the line number in the function, not in the overall file. In other words, if you used $LINENO in the echo statement in the errtrap routine, it would always evaluate to 2.

To get around this problem, we simply pass $LINENO as an argument to the trap handler, surrounding it in single quotes so that it doesn't get evaluated until the fake signal actually comes in:

function errtrap {
    es=$?
    echo "ERROR line $1: Command exited with status $es."
}
trap 'errtrap $LINENO' ERR
...

If you use this with the above example, the result is the message, ERROR line 12: Command exited with status 17. This is much more useful. We'll see a variation on this technique shortly.

This simple code is actually not a bad all-purpose debugging mechanism. It takes into account that a nonzero exit status does not necessarily indicate an undesirable condition or event: remember that every control construct with a conditional (if, while, etc.) uses a nonzero exit status to mean "false." Accordingly, the shell doesn't generate ERR traps when statements or expressions in the "condition" parts of control structures produce nonzero exit statuses. Also, an ERR trap is not inherited by shell functions, command substitutions, and commands executed in a subshell. However this inheritance behaviour can be turned on by using set -o errtrace (or set -E).[7]

One disadvantage is that exit statuses are not as uniform (or even as meaningful) as they should be, as we explained in Chapter 5. A particular exit status need not say anything about the nature of the error or even that there was an error.

DEBUG

Another fake signal, DEBUG, causes the trap code to be executed before every statement in a function or script.[8] This has two main uses. First is the use for humans, as a sort of "brute force" method of tracking a certain element of a program's state that you notice has gone awry.

For example, you notice the value of a particular variable is running amok. The naive approach is to put in a lot of echo statements to check the variable's value at several points. The DEBUG trap makes this easier by letting you do this:

function dbgtrap
{
    echo "badvar
                  is
                  $badvar"
}

trap dbgtrap DEBUG
...section of code in which the problem occurs...
trap - DEBUG    # turn off the DEBUG trap

This code will print the value of the wayward variable before every statement between the two traps.

One important point to remember when using DEBUG is that it is not inherited by functions called from the shell in which it is set. In other words, if your shell sets a DEBUG trap and then calls a function, the statements within the function will not execute the trap. There are three ways around this. Firstly you can set a trap for DEBUG explicitly within the function. Alternately you can declare the function with the -t option which turns on debug inheritance in functions and allows a function to inherit a DEBUG trap from the caller. Lastly you can use set -o functrace (or set -T) which does the same thing as declare but applies to all functions.[9]

The second use of the DEBUG signal is as a primitive for implementing a bash debugger. We'll look at doing just that shortly.

RETURN

A RETURN trap is executed each time a shell function or a script executed with the . or source commands finishes executing.

As with DEBUG, the RETURN trap is not inherited by functions. You again have the options of setting the trap for RETURN within the function, declare the function with the -t option so that that function inherits the trap, or use set -o functrace to turn on the inheritance for all functions.

Here is a simple example of a RETURN trap:

function returntrap {
    echo "A return occurred"
}

trap returntrap RETURN

function hello {
    echo "hello world"
}

hello

When the script is executed it executes the hello function and then runs the trap:

$ ./returndemo
hello world
A return occurred
$

Notice that it didn't trap when the script itself finished. The trap would only have run at the end of the script if we'd sourced the script. Normally, to trap at the exiting of the script we'd also need to define a trap for the EXIT signal that we looked at earlier.

In addition to these fake signals, bash 3.0 added some other features to help with writing a full-scale debugger for bash. The first of these is the extdebug option to the shopt command, which switches on certain things that are useful for a debugger. These include:

The -F option to declare displays the source filename and line number corresponding to each function name supplied as an argument.

If the command that is run by the DEBUG trap returns a non-zero value, the next command is skipped and not executed.

If the command run by the DEBUG trap returns a value of 2, and the shell is executing in a subroutine (a shell function or a shell script executed by the . or source commands), a call to return is simulated.

The shell also has a new option, —debugger, which switches on both the extdebug and functrace functionality.

Debugging Variables

Bash 3.0 added some useful environment variables to aid in writing a debugger. These include BASH_SOURCE, which contains an array of filenames that correspond to what is currently executing; BASH_LINENO, which is an array of line numbers that correspond to function calls that have been made; BASH_ARGC and BASH_ARGV array variables, the first holding the number of parameters in each frame and the second the parameters themselves.

We'll now look at writing a debugger, although we'll keep things simple and avoid using these variables. This also means the debugger will work with earlier versions of bash.

[1] Actually, if you are really concerned about efficiency, there are shell code compilers on the market; they convert shell scripts to C code that often runs quite a bit faster.

[2] In versions of bash prior to 2.0, LINENO won't give you the current line in a function. LINENO, instead, gives an approximation of the number of simple commands executed so far in the current function.

[3] We should admit that if you had turned on the nounset option at the top of this script, the shell would have flagged this error.

[6] You can use this signal only for the exiting of a script. Functions don't generate the EXIT signal, as they are part of the current shell invocation.

[7] Inheritance of the ERR trap is not available in versions of bash prior to 3.0.

[8] Warning: the DEBUG trap was run after statements in versions of bash prior to 2.05b. The debugger in this chapter has been written for the current version of bash where the trap is run before each statement.

[9] Inheritance of the DEBUG trap, declare -t, set -o functrace, and set -T are not available in bash prior to version 3.0.

A bash Debugger

In this section we'll develop a very basic debugger for bash.[10] Most debuggers have numerous sophisticated features that help a programmer in dissecting a program, but just about all of them include the ability to step through a running program, stop it at selected places, and examine the values of variables. These simple features are what we will concentrate on providing in our debugger. Specifically, we'll provide the ability to:

Specify places in the program at which to stop execution. These are called breakpoints.

Execute a specified number of statements in the program. This is called stepping.

Examine and change the state of the program during its execution. This includes being able to print out the values of variables and change them when the program is stopped at a breakpoint or after stepping.

Print out the source code we are debugging along with indications of where breakpoints are and what line in the program we are currently executing.

Provide the debugging capability without having to change the original source code of the program we wish to debug in any way.

As you will see, the capability to do all of these things (and more) is easily provided by the constructs and methods we have seen in previous chapters.

Structure of the Debugger

The bashdb debugger works by taking a shell script and turning it into a debugger for itself. It does this by concatenating debugger functionality and the target script, which we'll call the guinea pig script, and storing it in another file that then gets executed. The process is transparent to users—they will be unaware that the code that is executing is actually a modified copy of their script.

The bash debugger has three main sections: the driver, the preamble, and the debugger functions.

The driver script

The driver script is responsible for setting everything up. It is a script called bashdb and looks like this:

# bashdb - a bash debugger
# Driver Script: concatenates the preamble and the target script
# and then executes the new script.

echo 'bash Debugger version 1.0'

_dbname=${0##*/}

if (( $# < 1 )) ; then
  echo "$_dbname: Usage: $_dbname filename" >&2
  exit 1
fi

_guineapig=$1

if [ ! -r $1 ]; then
  echo "$_dbname: Cannot read file '$_guineapig'." >&2
  exit 1
fi

shift

_tmpdir=/tmp
_libdir=.
_debugfile=$_tmpdir/bashdb.$$  # temporary file for script that is
     being debugged
cat $_libdir/bashdb.pre $_guineapig > $_debugfile
exec bash $_debugfile $_guineapig $_tmpdir $_libdir "$@"

bashdb takes as the first argument the name of guinea pig file. Any subsequent arguments are passed on to the guinea pig as its positional parameters.

If no arguments are given, bashdb prints out a usage line and exits with an error status. Otherwise, it checks to see if the file exists. If it doesn't, exist then bashdb prints a message and exits with an error status. If all is in order, bashdb constructs a temporary file in the way we saw in the last chapter. If you don't have (or don't have access to) /tmp on your system, then you can substitute a different directory for _tmpdir.[11] The variable _libdir is the name of the directory that contains files needed by bashdb (bashdb.pre and bashdb.fns). If you are installing bashdb on your system for everyone to use, you might want to place them in /usr/lib.

The cat statement builds the modified copy of the guinea pig file: it contains the script found in bashdb.pre (which we'll look at shortly) followed by a copy of the guinea pig.

exec

The last line runs the newly created script with exec, a statement we haven't discussed yet. We've chosen to wait until now to introduce it because—as we think you'll agree—it can be dangerous. exec takes its arguments as a command line and runs the command in place of the current program, in the same process. In other words, a shell that runs exec will terminate immediately and be replaced by exec's arguments.[12]

In our script, exec just runs the newly constructed shell script, i.e., the guinea pig with its debugger, in another shell. It passes the new script three arguments—the name of the original guinea pig file ($_guineapig), the name of the temporary directory ($_tmpdir), and the name of the library directory ($_libdir)—followed by the user's positional parameters, if any.

The Preamble

Now we'll look at the code that gets prepended to the guinea pig script; we call this the preamble. It's kept in the file bashdb.pre and looks like this:

# bashdb preamble
# This file gets prepended to the shell script being debugged.
# Arguments:
# $1 = the name of the original guinea pig script
# $2 = the directory where temporary files are stored
# $3 = the directory where bashdb.pre and bashdb.fns are stored

_debugfile=$0
_guineapig=$1

_tmpdir=$2
_libdir=$3

shift 3

source $_libdir/bashdb.fns
_linebp=
let _trace=0
let _i=1

while read; do
  _lines[$_i]=$REPLY
  let _i=$_i+1
done < $_guineapig

trap _cleanup EXIT
let _steps=1
trap '_steptrap $(( $LINENO -29 ))' DEBUG

The first few lines save the three fixed arguments in variables and shift them out of the way, so that the positional parameters (if any) are those that the user supplied on the command line as arguments to the guinea pig. Then, the preamble reads in another file, bashdb.fns, which contains all of the functions necessary for the operation of the debugger itself. We put this code in a separate file to minimize the size of the temporary file. We'll examine bashdb.fns shortly.

Next, bashdb.pre initializes a breakpoint array to empty and execution tracing to off (see the following discussion), then reads the original guinea pig script into an array of lines. We need the source lines from the original script for two reasons: to allow the debugger to print out the script showing where the breakpoints are, and to print out the lines of code as they execute if tracing is turned on. You'll notice that we assign the script lines to _lines from the environment variable $REPLY rather than reading them into the array directly. This is because $REPLY preserves any leading whitespace in the lines, i.e., it preserves the indentation and layout of the original script.

The last five lines of code set up the conditions necessary for the debugger to begin working. The first trap command sets up a clean-up routine that runs when the fake signal EXIT occurs. The clean-up routine, normally called when the debugger and guinea pig script finish, just erases the temporary file. The next line sets the variable _steps to 1 so that when the debugger is first entered, it will stop after the first line.

The next line sets up the routine _steptrap to run when the fake signal DEBUG occurs.

The built-in variable LINENO, which we saw earlier in the chapter, is used to provide line numbers in the debugger. However, if we just used LINENO as is, we'd get line numbers above 30 because LINENO would be including the lines in the preamble. To get around this, we can pass LINENO minus the number of lines in the preamble to the trap.[13]

Debugger Functions

The function _steptrap is the entry point into the debugger; it is defined in the file bashdb.fns. Here is _steptrap:

# After each line of the test script is executed the shell traps to
# this function.

function _steptrap
{
    _curline=$1        # the number of the line that just ran

    (( $_trace )) && _msg "$PS4 line $_curline: ${_lines[$_curline]}"

    if (( $_steps >= 0 )); then
        let _steps="$_steps - 1"
    fi

    # First check to see if a line number breakpoint was reached.
    # If it was, then enter the debugger.
    if _at_linenumbp ; then
        _msg "Reached breakpoint at line $_curline"
        _cmdloop

    # It wasn't, so check whether a break condition exists and is true.
    # If it is, then enter the debugger.
    elif [ -n "$_brcond" ] && eval $_brcond; then
        _msg "Break condition $_brcond true at line $_curline"
        _cmdloop

    # It wasn't, so check if we are in step mode and the number of steps
    # is up. If it is then enter the debugger.
    elif (( $_steps == 0 )); then
        _msg "Stopped at line $_curline"
        _cmdloop
    fi
}

_steptrap starts by setting _curline to the number of the guinea pig line that just ran. If execution tracing is on, it prints the PS4 execution trace prompt (like the shell's xtrace mode), line number, and line of code itself. It then decrements the number of steps if the number of steps still left is greater than or equal to zero.

Then it does one of two things: it enters the debugger via _cmdloop, or it returns so the shell can execute the next statement. It chooses the former if a breakpoint or break condition has been reached, or if the user stepped into this statement.

Commands

We will explain shortly how _steptrap determines these things; now we will look at _cmdloop. It's a simple combination of the case statements we saw in Chapter 5, and the calculator loop we saw in the previous chapter.

# The Debugger Command Loop

function _cmdloop {
    local cmd args

    while read -e -p "bashdb> " cmd args; do
        case $cmd in
            \? | h  ) _menu ;;      # print command menu
            bc ) _setbc $args ;;    # set a break condition
            bp ) _setbp $args ;;    # set a breakpoint at the given
                                    # line
            cb ) _clearbp $args ;;  # clear one or all breakpoints
            ds ) _displayscript ;;  # list the script and show the
                                    # breakpoints
            g  ) return ;;          # "go": start/resume execution of
                                    # the script
            q  ) exit ;;            # quit

            s  ) let _steps=${args:-1}  # single step N times
                                        # (default = 1)
                 return ;;
            x  ) _xtrace ;;             # toggle execution trace
            !* ) eval ${cmd#!} $args ;; # pass to the shell
            *  ) _msg "Invalid command: '$cmd'" ;;
        esac
    done
}

At each iteration, _cmdloop prints a prompt, reads a command, and processes it. We use read -e so that the user can take advantage of the readline command-line editing. The commands are all one- or two-letter abbreviations; quick for typing, but terse in the UNIX style.[14]

Table 9-3 summarizes the debugger commands.

Table 9-3. bashdb commands

Command

Action

bp N

Set breakpoint at line N

bp

List breakpoints and break condition

bc string

Set break condition to string

bc

Clear break condition

cb N

Clear breakpoint at line N

cb

Clear all breakpoints

ds

Display the test script and breakpoints

g

Start/resume execution

s [N]

Execute N statements (default 1)

x

Toggle execution trace on/off

h, ?

Print the help menu

! string

Pass string to a shell

q

Quit

Before looking at the individual commands, it is important that you understand how control passes through _steptrap, the command loop, and the guinea pig.

_steptrap runs after every statement in the guinea pig as a result of the trap on DEBUG in the preamble. If a breakpoint has been reached or the user previously typed in a step command(s), _steptrap calls the command loop. In doing so, it effectively "interrupts" the shell that is running the guinea pig to hand control over to the user.

The user can invoke debugger commands as well as shell commands that run in the same shell as the guinea pig. This means that you can use shell commands to check values of variables, signal traps, and any other information local to the script being debugged. The command loop continues to run, and the user stays in control, until he types g, q, or s. We'll now look in detail at what happens in each of these cases.

Typing g has the effect of running the guinea pig uninterrupted until it finishes or hits a breakpoint. It simply exits the command loop and returns to _steptrap, which exits as well. The shell then regains control and runs the next statement in the guinea pig script. Another DEBUG signal occurs and the shell traps to _steptrap again. If there are no breakpoints then _steptrap will just exit. This process will repeat until a breakpoint is reached or the guinea pig finishes.

The q command calls the function _cleanup, which erases the temporary file and exits the program.

Stepping

When the user types s, the command loop code sets the variable _steps to the number of steps the user wants to execute, i.e., to the argument given. Assume at first that the user omits the argument, meaning that _steps is set to 1. Then the command loop exits and returns control to _steptrap, which (as above) exits and hands control back to the shell. The shell runs the next statement and returns to _steptrap, which then decrements _steps to 0. Then the second elif conditional becomes true because _steps is 0 and prints a "stopped" message and then calls the command loop.

Now assume that the user supplies an argument to s, say 3. _steps is set to 3. Then the following happens:

After the next statement runs, _steptrap is called again. It enters the first if clause, since _steps is greater than 0. _steptrap decrements _steps to 2 and exits, returning control to the shell.

This process repeats, another step in the guinea pig is run, and _steps becomes 1.

A third statement is run and we're back in _steptrap. _steps is decremented to 0, the second elif clause is run, and _steptrap breaks out to the command loop again.

The overall effect is that the three steps run and then the debugger takes over again.

All of the other debugger commands cause the shell to stay in the command loop, meaning that the user prolongs the "interruption" of the shell.

Breakpoints

Now we'll examine the breakpoint-related commands and the breakpoint mechanism in general. The bp command calls the function _setbp, which can do two things, depending on whether an argument is supplied or not. Here is the code for _setbp:

# Set a breakpoint at the given line number or list breakpoints
function _setbp
{
    local i

    if [ -z "$1" ]; then
        _listbp
    elif [ $(echo $1 | grep '^[0-9]*')  ]; then
        if [ -n "${_lines[$1]}" ]; then
            _linebp=($(echo $( (for i in ${_linebp[*]} $1; do
                    echo $i; done) | sort -n) ))
            _msg "Breakpoint set at line $1"
        else
            _msg "Breakpoints can only be set on non-blank lines"
        fi
    else
        _msg "Please specify a numeric line number"
    fi
}

If no argument is supplied, _setbp calls _listbp, which prints the line numbers that have breakpoints set. If anything other than a number is supplied as an argument, an error message is printed and control returns to the command loop. Providing a number as the argument allows us to set a breakpoint; however, we have to do another test before doing so.

What happens if the user decides to set a breakpoint at a nonsensical point: a blank line, or at line 1,000 of a 10-line program? If the breakpoint is set well beyond the end of the program, it will never be reached and will cause no problem. If, however, a breakpoint is set at a blank line, it will cause problems. The reason is that the DEBUG trap only occurs after each executed simple command in a script, not each line. Blank lines never generate the DEBUG signal. The user could set a breakpoint on a blank line, in which case continuing execution with the g command would never break back out to the debugger.

We can fix both of these problems by making sure that breakpoints are set only on lines with text.[15] After making the tests, we can add the breakpoint to the breakpoint array, _linebp. This is a little more complex than it sounds. In order to make the code in other sections of the debugger simpler, we should maintain a sorted array of breakpoints. To do this, we echo all of the line numbers currently in the array, along with the new number, in a subshell and pipe them into the UNIX sort command. sort -n sorts a list into numerically ascending order. The result of this is a list of ordered numbers which we then assign back to the _linebp array with a compound assignment.

To complement the user's ability to add breakpoints, we also allow the user to delete them. The cb command allows the user to clear single breakpoints or all breakpoints, depending on whether a line number argument is supplied or not. For example, cb 12 clears a breakpoint at line 12 (if a breakpoint was set at that line). cb on its own would clear all of the breakpoints that have been set. It is useful to look briefly at how this works; here is the code for the function that is called with the cb command, _clearbp:

function _clearbp
{
    local i

    if [ -z "$1" ]; then
        unset _linebp[*]
        _msg "All breakpoints have been cleared"
    elif [ $(echo $1 | grep '^[0-9]*')  ]; then
        _linebp=($(echo $(for i in ${_linebp[*]}; do
              if (( $1 != $i )); then echo $i; fi; done) ))
        _msg "Breakpoint cleared at line $1"
    else
        _msg "Please specify a numeric line number"
    fi
}

The structure of the code is similar to that used for setting the breakpoints. If no argument was supplied to the command, the breakpoint array is unset, effectively deleting all the breakpoints. If an argument was supplied and is not a number, we print out an error message and exit.

A numeric argument to the cb command means the code has to search the list of breakpoints and delete the specified one. We can easily make the deletion by following a procedure similar to the one we used when we added a breakpoint in _setbp. We execute a loop in a subshell, printing out the line numbers in the breakpoints list and ignoring any that match the provided argument. The echoed values once again form a compound statement, which can then be assigned to an array variable.[16]

The function _at_linenumbp is called by _steptrap after every statement; it checks whether the shell has arrived at a line number breakpoint. The code for the function is:

# See if this line number has a breakpoint
function _at_linenumbp
{
    local i=0

  if [ "$_linebp" ]; then
    while (( $i < ${#_linebp[@]} )); do
      if (( ${_linebp[$i]} == $_curline )); then
        return 0
      fi
      let i=$i+1
    done
  fi
  return 1
}

The function simply loops through the breakpoint array and checks the current line number against each one. If a match is found, it returns true (i.e., returns 0). Otherwise, it continues looping, looking for a match until the end of the array is reached. It then returns false.

It is possible to find out exactly what line the debugger is up to and where the breakpoints have been set in the guinea pig by using the ds command. We'll see an example of the output later, when we run a sample bashdb debugging session. The code for this function is fairly straightforward:

# Print out the shell script and mark the location of breakpoints
# and the current line
function _displayscript
{
    local i=1 j=0 bp cl

    ( while (( $i < ${#_lines[@]} )); do
          if [ ${_linebp[$j]} ] && (( ${_linebp[$j]} == $i )); then
              bp='*'
              let j=$j+1
          else
              bp=' '
          fi

          if (( $_curline == $i )); then
              cl=">"
          else
              cl=" "
          fi

          echo "$i:$bp $cl  ${_lines[$i]}"
          let i=$i+1
      done
    ) | more
}

This function contains a subshell, the output of which is piped to the UNIX more command. We have done this for user-friendly reasons; a long script would scroll up the screen quickly and the users may not have displays that allow them to scroll back to previous pages of screen output. more displays one screenful of output at a time.

The core of the subshell code loops through the lines of the guinea pig script. It first tests to see if the line it is about to display is in the array of breakpoints. If it is, a breakpoint character (*) is set and the local variable j is incremented. j was initialized to 0 at the beginning of the function; it contains the current breakpoint that we are up to. It should now be apparent why we went to the trouble of sorting the breakpoints in _setbp: both the line numbers and the breakpoint numbers increment sequentially, and once we pass a line number that has a breakpoint and find it in the breakpoint array, we know that future breakpoints in the script must be further on in the array. If the breakpoint array contained line numbers in a random order, we'd have to search the entire array to find out if a line number was in the array or not.

The core of the subshell code then checks to see if the current line and the line it is about to display are the same. If they are, a "current line" character (>) is set. The current displayed line number (stored in i), breakpoint character, current line character, and script line are then printed out.

We think you'll agree that the added complexity in the handling of breakpoints is well worth it. Being able to display the script and the location of breakpoints is an important feature in any debugger.

Break conditions

bashdb provides another method of breaking out of the guinea pig script: the break condition. This is a string that the user can specify that is evaluated as a command; if it is true (i.e., returns exit status 0), the debugger enters the command loop.

Since the break condition can be any line of shell code, there's a lot of flexibility in what can be tested. For example, you can break when a variable reaches a certain value—e.g., (( $x < 0 ))—or when a particular piece of text has been written to a file (grep string file). You will probably think of all kinds of uses for this feature.[17] To set a break condition, type bc string. To remove it, type bc without arguments—this installs the null string, which is ignored.

_steptrap evaluates the break condition $_brcond only if it's not null. If the break condition evaluates to 0, then the if clause is true and, once again, _steptrap calls the command loop.

Execution tracing

The final feature of the debugger is execution tracing, available with the x command.

The function _xtrace "toggles" execution tracing simply by assigning to the variable _trace the logical "not" of its current value, so that it alternates between 0 (off) and 1 (on). The preamble initializes it to 0.

Debugger limitations

We have kept bashdb reasonably simple so that you can see the fundamentals of building a shell script debugger. Although it contains some useful features and is designed to be a real tool, not just a scripting example, it has some important limitations. Some are described in the list that follows.

Debuggers tend to run programs slower than if they were executed on their own. bashdb is no exception. Depending upon the script you use it on, you'll find the debugger runs everything anywhere from 8 to 30 times more slowly. This isn't so much of a problem if you are stepping through a script in small increments, but bear it in mind if you have, say, initialization code with large looping constructs.

The debugger will not "step down" into shell scripts that are called from the guinea pig. To do this, you'd have to edit your guinea pig script and change a call to scriptname to bashdb scriptname.

Similarly, nested subshells are treated as one gigantic statement; you cannot step down into them at all.

The guinea pig itself should not trap on the fake signals DEBUG and EXIT; otherwise the debugger won't work.

Command error handling could be significantly improved.

Many of these are not insurmountable and you can experiment with solving them yourself; see the exercises at the end of this chapter.

The debugger from an earlier version of this book helped inspire a more comprehensive bash debugger maintained by Rocky Bernstein, which you can find at the Bash Debugger Project, http://bashdb.sourceforge.net/ .

A Sample bashdb Session

Now we'll show a transcript of an actual session with bashdb, in which the guinea pig is the solution to Task 6-1, the script ndu. Here is the transcript of the debugging session:

[bash]$ bashdb ndu
bash Debugger version 1.0
Stopped at line 0
bashdb> ds
1:     for dir in ${*:-.}; do
2:       if [ -e $dir ]; then
3:         result=$(du -s $dir | cut -f 1)
4:         let total=$result*1024
5:
6:         echo -n "Total for $dir = $total bytes"
7:
8:         if [ $total -ge 1048576 ]; then
9:           echo " ($((total/1048576)) Mb)"
10:         elif [ $total -ge 1024 ]; then
11:           echo " ($((total/1024)) Kb)"
12:         fi
13:       fi
14:     done
bashdb> s
Stopped at line 2
bashdb> bp 4
Breakpoint set at line 4
bashdb> bp 8
Breakpoint set at line 8
bashdb> bp 11
Breakpoint set at line 11
bashdb> ds
1:     for dir in ${*:-.}; do
2:  >    if [ -e $dir ]; then
3:         result=$(du -s $dir | cut -f 1)
4:*        let total=$result*1024
5:
6:         echo -n "Total for $dir = $total bytes"
7:
8:*        if [ $total -ge 1048576 ]; then
9:           echo " ($((total/1048576)) Mb)"
10:         elif [ $total -ge 1024 ]; then
11:*          echo " ($((total/1024)) Kb)"
12:         fi
13:       fi
14:     done
bashdb> g
Reached breakpoint at line 4
bashdb> !echo $total
6840032
bashdb> cb 8
Breakpoint cleared at line 8
bashdb> ds
1:     for dir in ${*:-.}; do
2:       if [ -e $dir ]; then
3:         result=$(du -s $dir | cut -f 1)
4:* >      let total=$result*1024
5:
6:         echo -n "Total for $dir = $total bytes"
7:
8:         if [ $total -ge 1048576 ]; then
9:           echo " ($((total/1048576)) Mb)"
10:         elif [ $total -ge 1024 ]; then
11:*          echo " ($((total/1024)) Kb)"
12:         fi
13:       fi
14:     done
bashdb> bp
Breakpoints at lines: 4 11
Break on condition:

bashdb> !total=5600
bashdb> g
Total for . = 5600 bytes (5 Kb)
Reached breakpoint at line 11
bashdb> cb
All breakpoints have been cleared
bashdb> ds
1:     for dir in ${*:-.}; do
2:       if [ -e $dir ]; then
3:         result=$(du -s $dir | cut -f 1)
4:         let total=$result*1024
5:
6:         echo -n "Total for $dir = $total bytes"
7:
8:         if [ $total -ge 1048576 ]; then
9:           echo " ($((total/1048576)) Mb)"
10:         elif [ $total -ge 1024 ]; then
11:  >        echo " ($((total/1024)) Kb)"
12:         fi
13:       fi
14:     done
bashdb> g
[bash]$

First, we display the script with ds and then perform a step, taking execution to line 2 of ndu. We then set breakpoints at lines 4, 8, and 11 and display the script again. This time the breakpoints are clearly marked by asterisks (*). The right angle bracket (>) indicates that line 2 was the most recent line executed.

Next, we continue execution of the script that breaks at line 4. We print out the value of total now and decide to clear the breakpoint at line 8. Displaying the script confirms that the breakpoint at line 8 is indeed gone. We can also use the bp command, and it too shows that the only breakpoints set are at lines 4 and 11.

At this stage we might decide that we want to check the logic of the if branch at line 11. This requires that $total be greater than or equal to 1,024, but less than 1,048,576. As we saw previously, $total is very large, so we set its value to 5,600 so that it will execute the second part of the if and continue execution. The script enters that section of the if correctly, prints out the value, and stops at the breakpoint.

To finish off, we clear the breakpoints, display the script again, and then continue execution, which exits the script.

Exercises

We'll conclude this chapter with some suggested enhancements to our simple debugger and a complete listing of the debugger command source code.

Improve command error handling in these ways:

Check that the arguments to s are valid numbers and print an appropriate error message if they aren't.

Check that a breakpoint actually exists before clearing it and warn the user if the line doesn't have a breakpoint.

Any other error handling that you can think of.

Add code to remove duplicate breakpoints (more than one breakpoint on one line).

Enhance the cb command so that the user can specify more than one breakpoint to be cleared at a time.

Implement an option that causes a break into the debugger whenever a command exits with non-zero status:

Implement it as the command-line option -e.

Implement it as the debugger command e to toggle it on and off. (Hint: when you enter _steptrap, $? is still the exit status of the last command that ran.)

Implement a command that prints out the status of the debugger: whether execution trace is on/off, error exit is on/off, and the number of the last line to be executed. In addition, move the functionality for displaying the breakpoints from bp to the new option.

Add support for multiple break conditions, so that bashdb stops execution whenever one of them becomes true and prints a message indicating which one became true. Do this by storing the break conditions in an array. Try to make this as efficient as possible, since the checking will take place after every statement.

Add the ability to watch variables.

Add a command aw that takes a variable name as an argument and adds it to a list of variables to watch. Any watched variables are printed out when execution trace is toggled on.

Add another command cw that, without an argument, removes all of the variables from the watch list. With an argument, it removes the specified variable.

Although placing an underscore at the start of the debugger identifiers will avoid name clashes in most cases, think of ways to automatically detect name clashes with the guinea pig script and how to get around this problem. (Hint: you could rename the clashing names in the guinea pig script at the point where it gets combined with the preamble and placed in the temporary file.)

Add any other features you can think of.

Finally, here is a complete source listing of the debugger function file bashdb.fns:

# After each line of the test script is executed the shell traps to
# this function.

function _steptrap
{
    _curline=$1        # the number of the line that just ran

    (( $_trace )) && _msg "$PS4 line $_curline: ${_lines[$_curline]}"

    if (( $_steps >= 0 )); then
        let _steps="$_steps - 1"
    fi

    # First check to see if a line number breakpoint was reached.
    # If it was, then enter the debugger.
    if _at_linenumbp ; then
        _msg "Reached breakpoint at line $_curline"
        _cmdloop

    # It wasn't, so check whether a break condition exists and is true.
    # If it is, then enter the debugger
    elif [ -n "$_brcond" ] && eval $_brcond; then
        _msg "Break condition $_brcond true at line $_curline"
        _cmdloop

    # It wasn't, so check if we are in step mode and the number of
    # steps is up. If it is, then enter the debugger.
    elif (( $_steps == 0 )); then
        _msg "Stopped at line $_curline"
        _cmdloop

    fi
}

# The Debugger Command Loop

function _cmdloop {
  local cmd args

  while read -e -p "bashdb> " cmd args; do
    case $cmd in
      \? | h  ) _menu ;;          # print command menu
      bc ) _setbc $args ;;        # set a break condition
      bp ) _setbp $args ;;        # set a breakpoint at the given line
      cb ) _clearbp $args ;;      # clear one or all breakpoints
      ds ) _displayscript ;;      # list the script and show the
                                  # breakpoints
      g  ) return ;;              # "go": start/resume execution of
                                  # the script
      q  ) exit ;;                # quit
      s  ) let _steps=${args:-1}  # single step N times (default = 1)
           return ;;
      x  ) _xtrace ;;             # toggle execution trace
     * ) eval ${cmd#!} $args ;; # pass to the shell
      *  ) _msg "Invalid command: '$cmd'" ;;
    esac
  done
}

# See if this line number has a breakpoint
function _at_linenumbp
{
    local i=0

    # Loop through the breakpoints array and check to see if any of
    # them match the current line number. If they do return true (0)
    # otherwise return false.

    if [ "$_linebp" ]; then
        while (( $i < ${#_linebp[@]} )); do
            if (( ${_linebp[$i]} == $_curline )); then
                return 0
            fi
            let i=$i+1
        done
    fi
    return 1
}

# Set a breakpoint at the given line number or list breakpoints
function _setbp
{
    local i

    # If there are no arguments call the breakpoint list function.
    # Otherwise check to see if the argument was a positive number.
    # If it wasn't then print an error message. If it was then check
    # to see if the line number contains text. If it doesn't then
    # print an error message. If it does then echo the current
    # breakpoints and the new addition and pipe them to "sort" and
    # assign the result back to the list of breakpoints. This results
    # in keeping the breakpoints in numerical sorted order.

    # Note that we can remove duplicate breakpoints here by using
    # the -u option to sort which uniquifies the list.

    if [ -z "$1" ]; then
        _listbp
    elif [ $(echo $1 | grep '^[0-9]*')  ]; then
        if [ -n "${_lines[$1]}" ]; then
            _linebp=($(echo $( (for i in ${_linebp[*]} $1; do
                      echo $i; done) | sort -n) ))
            _msg "Breakpoint set at line $1"
        else
            _msg "Breakpoints can only be set on non-blank lines"
        fi
    else
        _msg "Please specify a numeric line number"
    fi
}

# List breakpoints and break conditions
function _listbp
{
    if [ -n "$_linebp" ]; then
        _msg "Breakpoints at lines: ${_linebp[*]}"
    else
        _msg "No breakpoints have been set"
    fi

    _msg "Break on condition:"
    _msg "$_brcond"
}

# Clear individual or all breakpoints
function _clearbp
{
    local i bps

    # If there are no arguments, then delete all the breakpoints.
    # Otherwise, check to see if the argument was a positive number.
    # If it wasn't, then print an error message. If it was, then
    # echo all of the current breakpoints except the passed one
    # and assign them to a local variable. (We need to do this because
    # assigning them back to _linebp would keep the array at the same
    # size and just move the values "back" one place, resulting in a
    # duplicate value). Then destroy the old array and assign the
    # elements of the local array, so we effectively recreate it,
    # minus the passed breakpoint.

    if [ -z "$1" ]; then
        unset _linebp[*]
        _msg "All breakpoints have been cleared"
    elif [ $(echo $1 | grep '^[0-9]*')  ]; then
          bps=($(echo $(for i in ${_linebp[*]}; do
                if (( $1 != $i )); then echo $i; fi; done) ))
          unset _linebp[*]
          _linebp=(${bps[*]})
          _msg "Breakpoint cleared at line $1"
    else
        _msg "Please specify a numeric line number"
    fi
}

# Set or clear a break condition
function _setbc
{
    if [ -n "$*" ]; then
        _brcond=$args
        _msg "Break when true: $_brcond"
    else
        _brcond=
        _msg "Break condition cleared"
    fi
}

# Print out the shell script and mark the location of breakpoints
# and the current line

function _displayscript
{
    local i=1 j=0 bp cl

    ( while (( $i < ${#_lines[@]} )); do
          if [ ${_linebp[$j]} ] && (( ${_linebp[$j]} == $i )); then
              bp='*'
              let j=$j+1
          else
              bp=' '
          fi
          if (( $_curline == $i )); then
              cl=">"
          else
              cl=" "
          fi
          echo "$i:$bp $cl  ${_lines[$i]}"
          let i=$i+1
      done
    ) | more
}

# Toggle execution trace on/off
function _xtrace
{
    let _trace="! $_trace"
    _msg "Execution trace "
    if (( $_trace )); then
        _msg "on"
    else
        _msg "off"
    fi
}

# Print the passed arguments to Standard Error
function _msg
{
    echo -e "$@" >&2
}

# Print command menu
function _menu {
    _msg 'bashdb commands:
         bp N                set breakpoint at line N
         bp                  list breakpoints and break condition
         bc string           set break condition to string
         bc                  clear break condition
         cb N                clear breakpoint at line N
         cb                  clear all breakpoints
         ds                  displays the test script and breakpoints
         g                   start/resume execution
         s [N]               execute N statements (default 1)
         x                   toggle execution trace on/off
         h, ?                print this menu
         ! string            passes string to a shell
         q                   quit'
}

# Erase the temporary file before exiting
function _cleanup
{
    rm $_debugfile 2>/dev/null
}

[10] Unfortunately, the debugger will not work with versions of bash prior to 2.0, because they do not implement the DEBUG signal.

[11] All function names and variables (except those local to functions) in bashdb have names beginning with an underscore (_), to minimize the possibility of clashes with names in the guinea pig script.

[12] exec can also be used with an I/O redirector only; this makes the redirector take effect for the remainder of the script or login session. For example, the line exec 2>errlog at the top of a script directs standard error to the file errlog for the rest of the script.

[13] If you are typing or scanning in the preamble code from this book, make sure that the last line in the file is the call to set the trap, i.e., no blank lines should appear after the call to trap.

[14] There is nothing to stop you from changing the commands to something you find easier to remember. There is no "official" bash debugger, so feel free to change the debugger to suit your needs.

[15] This isn't a complete solution. Certain other lines (e.g., comments) will also be ignored by the DEBUG trap. See the list of limitations and the exercises at the end of this chapter.

[16] bash versions 2.01 and earlier have a bug in assigning arrays to themselves that prevents the code for setbp and clearbp from working. In each case, you can get around this bug by assigning _linebp to a local variable first, unsetting it, and then assigning the local variable back to it. Better yet, update to a more recent version of bash.

[17] Bear in mind that if your break condition sends anything to standard output or standard error, you will see it after every statement executed. Also, make sure your break condition doesn't take a long time to run; otherwise your script will run very, very slowly.

Chapter 10. bash Administration

There are two areas in which system administrators use the shell as part of their job: setting up a generic environment for users and for system security. In this chapter, we'll discuss bash's features that relate to these tasks. We assume that you already know the basics of UNIX system administration.[1]

Installing bash as the Standard Shell

As a prelude to system-wide customization, we want to emphasize that bash can be installed as if it were the standard Bourne shell, /bin/sh. Indeed, some systems, such as Linux, come with bash installed instead of the Bourne shell.

If you want to do this with your system, you can just save the original Bourne shell to another filename (in case someone needs to use it) and either install bash as sh in the /bin directory, or better yet install bash in the /bin directory and create a symbolic link from /bin/sh to /bin/bash using the command ln -s /bin/bash /bin/sh. The reason we think that the second option is better is because bash changes its behavior slightly if started as sh, as we will see shortly.

As detailed in Appendix A, bash is backward-compatible with the Bourne shell, except that it doesn't support ^ as a synonym for the pipe character (|). Unless you have an ancient UNIX system, or you have some very, very old shell scripts, you needn't worry about this.

But if you want to be absolutely sure, simply search through all shell scripts in all directories in your PATH. An easy way to perform the search is to use the file command, which we saw in Chapter 5 and Chapter 9. file prints "executable shell script" when given the name of one.[2] Here is a script that looks for ^ in shell scripts in every directory in your PATH:

IFS=:
for d in $PATH; do
    echo checking $d:
    cd $d
    scripts=$(file * | grep 'shell script' | cut -d: -f1)
    for f in $scripts; do
        grep '\^' $f /dev/null
    done
done

The first line of this script makes it possible to use $PATH as an item list in the for loop. For each directory, it cds there and finds all shell scripts by piping the file command into grep and then, to extract the filename only, into cut. Then for each shell script, it searches for the ^ character.[3]

If you run this script, you will probably find several occurrences of ^—but these carets should be used within regular expressions in grep, sed, or awk commands, not as pipe characters. As long as carets are never used as pipes, it is safe for you to install bash as /bin/sh.

As we mentioned earlier, if bash is started as sh (because the executable file has been renamed sh or there is a link from sh to bash) its startup behavior will change slightly to mimic the Bourne shell as closely as possible. For login shells it only attempts to read /etc/profile and ~/.profile, ignoring any other startup files like ~/.bash_profile. For interactive shells it won't read the initialization file ~/.bashrc.[4]

POSIX Mode

Besides its native operating mode, bash can also be switched into POSIX mode. The POSIX (Portable Operating System Interface) standard, described in detail in Appendix A, defines guidelines for standardizing UNIX. One part of the POSIX standard covers shells.

bash is nearly 100% POSIX-compliant in its native mode. If you want strict POSIX adherence, you can either start bash with the —posix option, or set it from within the shell with set -o posix.

Only in very rare circumstances would you ever have to use POSIX mode. The differences, outlined in Appendix A, are small and are mostly concerned with the command lookup order and how functions are handled. Most bash users should be able to get through life without ever having to use this option.

Command-Line Options

bash has several command-line options that change the behavior of and pass information to the shell. The options fall into two sets: single character options, like we've seen in previous chapters of this book, and multicharacter options, which are a relatively recent improvement to UNIX utilities.[5] Table 10-1 lists all of the options.[6]

Table 10-1. bash command-line options

Option

Meaning

-c string

Commands are read from string, if present. Any arguments after string are interpreted as positional parameters, starting with $0.

-D

A list of all double-quoted strings preceded by $ is printed on the standard ouput. These are the strings that are subject to language translation when the current locale is not C or POSIX. This also turns on the -n option.

-i

Interactive shell. Ignores signals TERM, INT, and QUIT. With job control in effect, TTIN, TTOU, and TSTP are also ignored.

-l

Makes bash act as if invoked as a login shell.

-o option

Takes the same arguments as set -o.

-O, +O shopt-option

shopt-option is one of the shell options accepted by the shopt builtin. If shopt-option is present, -O sets the value of that option; +O unsets it. If shopt-option is not supplied, the names and values of the shell options accepted by shopt are printed on the standard output. If the invocation option is +O, the output is displayed in a format that may be reused as input.

-s

Reads commands from the standard input. If an argument is given to bash, this flag takes precedence (i.e., the argument won't be treated as a script name and standard input will be read).

-r

Restricted shell. See the Section 10.3.1 later in this chapter.

-v

Prints shell input lines as they're read.

-

Signals the end of options and disables further option processing. Any options after this are treated as filenames and arguments. — is synonymous with -.

—debugger

Arranges for the debugger profile to be executed before the shell starts. Turns on extended debugging mode and shell function tracing.[7]

—dump-strings

Does the same as -D.

—dump-po-strings

Does the same as -D but the output is in the GNU gettext po (portable object) file format.

—help

Displays a usage message and exits.

—login

Makes bash act as if invoked as a login shell. Same as -l.

—noediting

Does not use the GNU readline library to read command lines if interactive.

—noprofile

Does not read the startup file /etc/profile or any of the personal initialization files.

—norc

Does not read the initialization file ~/.bashrc if the shell is interactive. This is on by default if the shell is invoked as sh.

—posix

Changes the behavior of bash to follow the POSIX guidelines more closely where the default operation of bash is different.

—quiet

Shows no information on shell startup. This is the default.

—rcfile file, —init-file file

Executes commands read from file instead of from the initialization file ~/.bashrc if the shell is interactive.

—verbose

Equivalent to -v.

—version

Shows the version number of this instance of bash and then exits.

[7] Only available in bash version 3.0 and later.

The multicharacter options have to appear on the command line before the single-character options. In addition to these, any set option can be used on the command line. Like shell built-ins, using a + instead of - turns an option off.

Of these options, the most useful are -i (interactive), -r (restricted), -s (read from standard input), -p (privileged), and -m (enable job control). Login shells are usually run with the -i, -s, and -m flags. We'll look at restricted and privileged modes later in this chapter.

[1] A good source of information on system administration is Essential System Administration by Æleen Frisch (O'Reilly ).

[2] The exact message varies from system to system; make sure that yours prints this message when given the name of a shell script. If not, just substitute the message your file command prints for "shell script" in the following code.

[3] The inclusion of /dev/null in the grep command is a kludge that forces grep to print the names of files that contain a match, even if there is only one such file in a given directory.

[4] bash also enters POSIX mode when started as sh. Versions of bash prior to 2.0 don't—POSIX mode has to be explicitly set with the —posix command-line option.

[5] Multicharacter options are far more readable and easier to remember than the old, and usually cryptic, single character options. All of the GNU utilities have multicharacter options, but many applications and utilities (certainly those on old UNIX systems) allow only single-character options.

[6] See Appendix B for a list of options for versions of bash prior to 2.0.

Environment Customization

Like the Bourne shell, bash uses the file /etc/profile for system-wide customization. When a user logs in, the shell reads and runs /etc/profile before running the user's .bash_profile.

We won't cover all the possible commands you might want to put in /etc/profile. But bash has a few unique features that are particularly relevant to system-wide customization; we'll discuss them here.

We'll start with two built-in commands that you can use in /etc/profile to tailor your users' environments and constrain their use of system resources. Users can also use these commands in their .bash_profile, or at any other time, to override the default settings.

umask

umask, like the same command in most other shells, lets you specify the default permissions that files have when users create them. It takes the same types of arguments that the chmod command does, i.e., absolute (octal numbers) or symbolic permission values.

The umask contains the permissions that are turned off by default whenever a process creates a file, regardless of what permission the process specifies.[8]

We'll use octal notation to show how this works. As you probably know, the digits in a permission number stand (left to right) for the permissions of the owner, owner's group, and all other users, respectively. Each digit, in turn, consists of three bits, which specify read, write, and execute permissions from left to right. (If a file is a directory, the "execute" permission becomes "search" permission, i.e., permission to cd to it, list its files, etc.)

For example, the octal number 640 equals the binary number 110 100 000. If a file has this permission, then its owner can read and write it; users in the owner's group can only read it; everyone else has no permission on it. A file with permission 755 gives its owner the right to read, write, and execute it and everyone else the right to read and execute (but not write).

022 is a common umask value. This implies that when a file is created, the "most" permission it could possibly have is 755—which is the usual permission of an executable that a compiler might create. A text editor, on the other hand, might create a file with 666 permission (read and write for everyone), but the umask forces it to be 644 instead.

ulimit

The ulimit command was originally used to specify the limit on file creation size. But bash's version has options that let you put limits on several different system resources. Table 10-2 lists the options.

Table 10-2. ulimit resource options

Option

Resource limited

-a

All limits (for printing values only)

-c

Core file size (1 Kb blocks)

-d

Process data segment (Kb)

-f

File size (1 Kb blocks)

-l

Maximum size of a process that can be locked in memory (Kb)[9]

-m

Maximum resident set size

-n

File descriptors

-p

Pipe size (512 byte blocks)

-s

Process stack segment (Kb)

-t

Process CPU time (seconds)

-u

Maximum number of processes available to a user

-v

Virtual memory (Kb)

[9] Not available in versions of bash prior to 2.0.

Each takes a numerical argument that specifies the limit in units shown in the table. You can also give the argument "unlimited" (which may actually mean some physical limit), "hard" and "soft", which refer to the current hard and soft limits (see below), or you can omit the argument, in which case it will print the current limit. ulimit -a prints limits (or "unlimited") of all types.[10] You can specify only one type of resource at a time. If you don't specify any option, -f is assumed.

Some of these options depend on operating system capabilities that don't exist in older UNIX versions. In particular, some older versions have a fixed limit of 20 file descriptors per process (making -n irrelevant), and some don't support virtual memory (making -v irrelevant).

The -d and -s options have to do with dynamic memory allocation, i.e., memory for which a process asks the operating system at runtime. It's not necessary for casual users to limit these, though software developers may want to do so to prevent buggy programs from trying to allocate endless amounts of memory due to infinite loops.

The -v and -m options are similar; -v puts a limit on all uses of memory, and -m limits the amount of physical memory that a process is allowed to use. You don't need these unless your system has severe memory constraints or you want to limit process size to avoid thrashing.

The -u option is another option which is useful if you have system memory constraints or you wish just wish to stop individual users from hogging the system resources.

You may want to specify limits on file size (-f and -c) if you have constraints on disk space. Sometimes users actually mean to create huge files, but more often than not, a huge file is the result of a buggy program that goes into an infinite loop. Software developers who use debuggers like sdb, dbx, and gdb should not limit core file size, because core dumps are necessary for debugging.

The -t option is another possible guard against infinite loops. However, a program that is in an infinite loop but isn't allocating memory or writing files is not particularly dangerous; it's better to leave this unlimited and just let the user kill the offending program.

In addition to the types of resources you can limit, ulimit lets you specify hard or soft limits. Hard limits can be lowered by any user but only raised by the super user (root); users can lower soft limits and raise them—but only as high as the hard limit for that resource.

If you give -H along with one (or more) of the options above, ulimit will set hard limits; -S sets soft limits. Without either of these, ulimit sets the hard and soft limit. For example, the following commands set the soft limit on file descriptors to 64 and the hard limit to unlimited:

ulimit -Sn 64
ulimit -Hn unlimited

When ulimit prints current limits, it prints soft limits unless you specify -H.

Types of Global Customization

The best possible approach to globally available customization would be a system-wide environment file that is separate from each user's environment file—just like /etc/profile is separate from each user's .bash_profile. Unfortunately, bash doesn't have this feature.

Nevertheless, the shell gives you a few ways to set up customizations that are available to all users at all times. Environment variables are the most obvious; your /etc/profile file will undoubtedly contain definitions for several of them, including PATH and TERM.

The variable TMOUT is useful when your system supports dialup lines. Set it to a number N, and if a user doesn't enter a command within N seconds after the shell last issued a prompt, the shell will terminate. This feature is helpful in preventing people from "hogging" the dialup lines.

You may want to include some more complex customizations involving environment variables, such as the prompt string PS1 containing the current directory (as seen in Chapter 4).

You can also turn on options, such as emacs or vi editing modes, or noclobber to protect against inadvertent file overwriting. Any shell scripts you have written for general use also contribute to customization.

Unfortunately, it's not possible to create a global alias. You can define aliases in /etc/profile, but there is no way to make them part of the environment so that their definitions will propagate to subshells. (In contrast, users can define global aliases by putting their definitions in ~/.bashrc.)

However, you can set up global functions. These are an excellent way to customize your system's environment, because functions are part of the shell, not separate processes.

[8] If you are comfortable with Boolean logic, think of the umask as a number that the operating system logically ANDs with the permission given by the creating process.

[10] The "hard" and "soft" arguments are not available in bash prior to version 2.05a.

System Security Features

UNIX security is a problem of legendary notoriety. Just about every aspect of a UNIX system has some security issue associated with it, and it's usually the system administrator's job to worry about this issue.

bash has two features that help solve this problem: the restricted shell, which is intentionally "brain damaged," and privileged mode, which is used with shell scripts that run as if the user were root.

Restricted Shell

The restricted shell is designed to put the user into an environment where her ability to move around and write files is severely limited. It's usually used for "guest" accounts.[11] You can make a user's login shell restricted by putting rbash in the user's /etc/passwd entry.[12]

The specific constraints imposed by the restricted shell disallow the user from doing the following:

Changing working directories: cd is inoperative. If you try to use it, you will get the error message bash: cd: restricted.

Redirecting output to a file: the redirectors >, >|, <>, and >> are not allowed.

Assigning a new value to the environment variables ENV, BASH_ENV, SHELL, or PATH.

Specifying any commands with slashes (/) in them. The shell will treat files outside of the current directory as "not found."

Using the exec built-in.

Specifying a filename containing a / as an argument to the . built-in command.

Importing function definitions from the shell environment at startup.

Adding or deleting built-in commands with the -f and -d options to the enable built-in command.

Specifying the -p option to the builtin command.

Turning off restricted mode with set +r.

These restrictions go into effect after the user's .bash_profile and environment files are run. In addition, it is wise to change the owner of the users' .bash_profile and .bashrc to root, and make these files read-only. The users' home directory should also be made read-only.

This means that the restricted shell user's entire environment is set up in /etc/profile and .bash_profile. Since the user can't access /etc/profile and can't overwrite .bash_profile, this lets the system administrator configure the environment as he sees fit.

Two common ways of setting up such environments are to set up a directory of "safe" commands and have that directory be the only one in PATH, and to set up a command menu from which the user can't escape without exiting the shell.

A System Break-In Scenario

Before we explain the other security features, here is some background information on system security that should help you understand why they are necessary.

Many problems with UNIX security hinge on a UNIX file attribute called the suid (set user ID) bit. This is like a permission bit (see umask earlier in this chapter): when an executable file has it turned on, the file runs with an effective user ID equal to the owner of the file, which is usually root. The effective user ID is distinct from the real user ID of the process.

This feature lets administrators write scripts that do certain things that require root privilege (e.g., configure printers) in a controlled way. To set a file's suid bit, the superuser can type chmod 4755 filename; the 4 is the suid bit.

Modern system administration wisdom says that creating suid shell scripts is a very, very bad idea.[13] This has been especially true under the C shell, because its .cshrc environment file introduces numerous opportunities for break-ins. bash's environment file feature creates similar security holes, although the security feature we'll see shortly make this problem less severe.

We'll show why it's dangerous to set a script's suid bit. Recall that in Chapter 3, we mentioned that it's not a good idea to put your personal bin directory at the front of your PATH. Here is a scenario that shows how this placement combines with suid shell scripts to form a security hole: a variation of the infamous "Trojan horse" scheme. First, the computer cracker has to find a user on the system with an suid shell script. In addition, the user must have a PATH with her personal bin directory listed before the public bin directories, and the cracker must have write permission on the user's personal bin directory.

Once the cracker finds a user with these requirements, he follows these steps:

Looks at the suid script and finds a common utility that it calls. Let's say it's grep.

Creates the Trojan horse, which is this case is a shell script called grep in the user's personal bin directory. The script looks like this:

cp /bin/bash filename
                     chown root
                     filename
                     chmod 4755
                     filename
                     /bin/grep "$@
rm ~/bin/grep

filename should be some unremarkable filename in a directory with public read and execute permission, such as /bin or /usr/bin. The file, when created, will be that most heinous of security holes: an suid interactive shell.

Sits back and waits for the user to run the suid shell script—which calls the Trojan horse, which in turn creates the suid shell and then self-destructs.

Runs the suid shell and creates havoc.

Privileged Mode

The one way to protect against Trojan horses is privileged mode. This is a set -o option (set -o privileged or set -p).

In privileged mode, when an suid bash shell script is invoked, the shell does not run the user's environment file—i.e., it doesn't expand the user's BASH_ENV environment variable.

Since privileged mode is an option, it is possible to turn it off with the command set +o privileged (or set +p). But this doesn't help the potential system cracker: the shell automatically changes its effective user ID to be the same as the real user ID—i.e., if you turn off privileged mode, you also turn off suid.

Privileged mode is an excellent security feature; it solves a problem that originated when the environment file idea first appeared in the C shell.

Nevertheless, we still strongly recommend against creating suid shell scripts. We have shown how bash protects against break-ins in one particular situation, but that certainly does not imply that bash is "safe" in any absolute sense. If you really must have suid scripts, you should carefully consider all relevant security issues.

Finally, if you would like to learn more about UNIX security, we recommend Practical UNIX and Internet Security, by Gene Spafford and Simson Garfinkel (O'Reilly ).

[11] This feature is not documented in the manual pages for old versions of bash.

[12] If this option has been included when the shell was compiled. See Chapter 11 for details on configuring bash.

[13] In fact, most versions of UNIX intentionally disable the suid feature for shell scripts.

Chapter 11. Shell Scripting

For the majority of this book, we've looked at the various elements that make up bash and how you can use them in writing shell scripts. If you've used other programming languages you will know that there is a difference between writing a piece of code that gets a job done and writing a piece of code that does the job but is also maintainable and conforms to what we could call "good practice."

This chapter will give a brief introduction to some aspects of good practice and writing maintainable shell scripts along with helpful tips and tricks that you can use to make writing scripts easier.

What's That Do?

Six months ago you coded up a 100 line shell script. It made perfect sense then, but now you look at it and wonder, "Just what does that do?" This is a common pitfall among programmers—especially those writing in a shell language. Unfortunately, shells have developed with more than their fair share of obscure punctuation. This is a blessing for keeping typing to a minimum but doesn't help readability. It's important to make your code as readable as possible.

Comments

The first rule of shell scripting is to comment your code. You should do this right from the start, even if the script is only a couple of lines long. Shell scripts have a habit of growing from a couple of lines to many hundreds of lines as more features are added, so it's best to get into the habit of commenting your code right at the beginning.

To start with, consider having a main header or banner for your scripts. The information in the header should, at a minimum, say what the script does. Here is an example of a script header:

#!/bin/bash
#####################################################
# Name: graphconv.sh
#
# Converts graphics files from one format to another.
#
# Usage: graphconv.sh <input-file> <output-file>
#
# Author: C. Newham
# Date: 2004/12/02
#####################################################

This main header gives the name of the script, a brief summary of what it does, usage information, the name of the author, and when the script was written.

If you are using a source control system (e.g., CVS), you can dispense with the author and date as these will be stored when the script is archived. If you aren't using such a system, we strongly advise that you not only include the above information but also place in the header additional data such as modification dates and authors.

Whatever system you use, make sure that you make the format of the banner a standard across all of your scripts.

Every function should also have a header. If it is a standalone function, it should have a main header, as given above. If it is a function used locally in a script, it should have a simpler banner stating what it does, what parameters it expects, and what it returns, e.g.:

# Changes the filename extension
#
# param: $infile - the original filename
#
# returns: the modified name with new extension.
#
function change_filename( )
...

Comments should also be used frequently in your code to say what the code is doing. While we aren't about to dictate style, comments within the flow of the code are generally better on a line by themselves, while variable declaration comments are better on the same line as the variable:

startup_dir=/home/startup/  # directory with startup files
file_limit=50               # maximum number of files to process
...
if [ -d "$startup_dir" ]
then
    # the startup directory exists so read any initialisation file.
    echo "initialising file processing..."

Variables and Constants

Headers and comments are just one way to document your code. Another is by the use of descriptive variable names. Good variable names should give an indication of what the variable represents. Names like "x", "resn" or "procd" will only have meaning at the time that you write the script. Six months down the track and they will be a mystery.

Good names should be short but descriptive. The three examples above might have been more meaningfully written as "file_limit", "resolution", and "was_processed". Don't make the names too long; the name "horizontal_resolution_of_the_picture" just clutters a script and takes away any advantage in making the name so descriptive.

Constants should be in uppercase and should normally be declared as read-only:

declare -r CAPITAL_OF_ENGLAND="London"

You should always avoid "magic numbers" sprinkled throughout the code by using constants. For example:

if [[ $process_result == 68 ]]
...

should be replaced with:

declare -ir STAGE_3_FAILURE=68
...
if [[ $process_result == $STAGE_3_FAILURE ]]
...

Not only does this make the code more readable but it makes changing the value easier, especially if it is used numerous times in the script.

Starting Up

In Chapter 6 we talked about using getopts to obtain options and arguments passed in to a shell script. This command makes it easy for the script programmer to process what the user has provided, but what about the other half of the deal? The programmer must make an effort to make life as easy for the user as possible. Nothing makes a user more irate than a script that doesn't take standard arguments, doesn't provide a usage message, doesn't process the arguments in the expected way, and forces the user into a way of thinking that the programmer thinks is the right way. Having to examine the source code for a script to find out what is an acceptable argument or option is usually the last straw!

The Free Software Foundation has published a set of guidelines for writing GNU software that suggests standard ways in which UNIX utilities should operate.[1] When writing your own shell scripts, it is worthwhile to follow the guidelines because your script will then look familiar to users who have used other command-line programs.

At a minimum your script should provide single letter options (such as -h) and long options with the double dash (such as —help). It should also provide two options: —help and —version. From the GNU manual:

—version

This option should direct the program to print information about its name, version, origin, and legal status, all on standard output, and then exit successfully. Other options and arguments should be ignored once this is seen, and the program should not perform its normal function.

—help

This option should output brief documentation for how to invoke the program, on standard output, then exit successfully. Other options and arguments should be ignored once this is seen, and the program should not perform its normal function.

Near the end of the —help option's output there should be a line that says where to mail bug reports. It should have this format:

Report bugs to mailing-address.

Table 11-1 lists a few of the common single-letter and long options that you may consider using for your own scripts. This list is by no means exhaustive and is intended merely for guidance.

Table 11-1. Possible options

Long option

Option

Examples where used

—all

-a

du, ls, nm, stty, uname, unexpand

—append

-a

etags, tee, time

—binary

-b

cpio, diff

—blocks

-b

head, tail

—date

-d

touch

—directory

-d

cpio

—exclude-from

-X

tar

—file

-f

fgrep

—help

-h

man

—long

-l

ls

—line

-l

wc

—links

-L

cpio, ls

—output

-o

cc, sort

—quiet

-q

who

—recursive

-r

rm

—recursive

-R

ls

—silent

-s

Synonym for -quiet

—unique

-u

sort

—verbose

-v

cpio, tar

—width

-w

pr, sdiff

For commands that take one or more input files and produce an output file it is considered good practice to make only the input files normal arguments (i.e., command filename ) and have the output file specified by an option (i.e., command -o filename ).

Another thing to watch out for is assuming that a particular environment variable needed by your script has been set in the users' environment. If your script is relying on the user to have set an environment variable, it is probably better to redesign your script to allow the value to be passed in as an argument.

[1] The document is available at http://www.gnu.org/prep/standards/.

Potential Problems

Here are some useful things to watch out for when writing shell scripts. Being aware of them will not only save you time in tracking down bugs but will also make your scripts more robust, more readable, and above all, more maintainable.

Don't create massive scripts or functions that try to do everything. Split functionality up into smaller units and place them in functions. This not only makes the code easier to read but makes it easier to debug.

Always place the shell execution directive (e.g., #!/bin/bash) at the top of your scripts to ensure they will be run by bash.

Don't use reserved words for variable names. This can become very confusing:

let let="echo"
let echo="hello"
echo "$echo world"

Be careful with whitespace. Attempting the following assignment will not give the expected result:

cat = 5

Don't use the same names for variables and functions:

function letter
{
     echo $1etter
}

letter=letter
letter letter

This causes more confusion that it's worth. While this example is contrived, be on your guard for more subtle examples. To guard against this, try and name your functions using verbs, e.g., function print_letter.

Be careful when using the test operator [...]. The following two if statements are not the same, although they look very similar:

         if [ "$var" = 42 ]
         if [ "$var" -eq 42 ]

The first is a string comparison, the second an integer comparison. We suggest using ((...)) for arithmetic comparisons in if statements.

Don't Use bash

Sometimes you might start writing a script and after several hours of work find that you've created a monster with many hundreds of lines of complicated code. This is not always a bad thing, but it is a good idea to always be thinking about whether the job could be done in a better way.

Usually the choice of programming language should take place at the design stage. If you are starting from scratch on a Unix system you will have many options, including C and C++, perl, python, and a host of others. They all have their advantages and disadvantages, and no one language will be the best solution for every problem.

If you find that your script has a huge amount of processing to do quickly or if the script requires mathematical capabilities beyond simple integer arithmetic, it might be worthwhile considering C or C++ for the job. If you are looking for better portability across systems, python or perl might be a better match to the task.

However, even if bash is not suitable in the final solution to a problem, you might find it makes an excellent language for mocking up your solution and trying out various options.

Chapter 12. bash for Your System

The first 10 chapters of this book looked at nearly all aspects of bash, from navigating the filesystem and editing the command-line to writing shell scripts and functions using lesser-known features of the shell. This is all very well and good, but what if you have an old version of bash and want the new features shown in this book (or worse yet, you don't have bash at all)?

In this chapter we'll show you how to get the latest version of bash and install it on your system, and we'll discuss potential problems you might encounter along the way. We'll also look briefly at the examples that come with bash and how you can report bugs to the bash maintainer.

Obtaining bash

If you have a direct connection to the Internet, you should have no trouble obtaining bash; otherwise, you'll have to do a little more work.

The bash home page is located at http://www.gnu.org/software/bash/bash.html and you can find the very latest details of the current distribution and where to obtain it from there.

You can also get bash on CD-ROM by ordering it directly from the Free Software Foundation, either via the web ordering page at http://order.fsf.org or from:

The Free Software Foundation (FSF)
59 Temple Place - Suite 330
Boston, MA 02111-1307 USA

Phone: +1-617-542-5942
Fax: +1-617-542-2652
Email: order@fsf.org

Unpacking the Archive

Having obtained the archive file by one of the above methods, you need to unpack it and install it on your system. Unpacking can be done anywhere—we'll assume you're unpacking it in your home directory. Installing it on the system requires you to have root privileges. If you aren't a system administrator with root access, you can still compile and use bash; you just can't install it as a system-wide utility. The first thing to do is uncompress the archive file by typing gunzip bash-3.0.tar.gz.[1] Then you need to "untar" the archive by typing tar -xf bash-3.0.tar. The -xf means "extract the archived material from the specified file." This will create a directory called bash-3.0 in your home directory.

The archive contains all of the source code needed to compile bash and a large amount of documentation and examples. We'll look at these things and how you go about making a bash executable in the rest of this chapter.

[1] gunzip is the GNU decompression utility. gunzip is popular but relatively new and some systems don't have it. If your system doesn't, you can obtain it by the same methods as you obtained bash. gunzip is available from the FSF. gzip -d does the same thing as gunzip.

What's in the Archive

The bash archive contains a main directory (bash-3.0 for the current version) and a set of files and subdirectories. Among the first files you should examine are:

MANIFEST

A list of all the files and directories in the archive

COPYING

The GNU Copyleft for bash

NEWS

A list of bug fixes and new features since the last version

README

A short introduction and instructions for compiling bash

You should also be aware of two directories:

doc

Information related to bash in various formats

examples

Examples of startup files, scripts, and functions

The other files and directories in the archive are mostly things that are needed during the build. Unless you are going to go hacking into the internal workings of the shell, they shouldn't concern you.

Documentation

The doc directory contains a few articles that are worth reading. Indeed, it would be well worth printing out the manual entry for bash so you can use it in conjunction with this book. The README file gives a short summary of the files.

The document you'll most often use is the manual page entry (bash.1). The file is in troff format—that used by the manual pages. You can read it by processing it with the text-formatter nroff and piping the output to a pager utility: nroff -man bash.1 | more should do the trick. You can also print it off by piping it to the lineprinter (lp). This summarizes all of the facilities your version of bash has and is the most up-to-date reference you can get. This document is also available through the man facility once you've installed the package, but sometimes it's nice to have a hard copy so you can write notes all over it.

Of the other documents, FAQ is a Frequently Asked Questions document with answers, readline.3 is the manual entry for the readline facility, and article.ms is an article about the shell that appeared in Linux Journal, by the current bash maintainer, Chet Ramey.

Configuring and Building bash

To compile bash "straight out of the box" is easy;[2] you just type configure and then make! The bash configure script attempts to work out if you have various utilities and C library functions, and whereabouts they reside on your system. It then stores the relevant information in the file config.h. It also creates a file called config.status that is a script you can run to recreate the current configuration information. While the configure is running, it prints out information on what it is searching for and where it finds it.

The configure script also sets the location that bash will be installed; the default is the /usr/local area (/usr/local/bin for the executable, /usr/local/man for the manual entries etc.). If you don't have root privileges and want it in your own home directory, or you wish to install bash in some other location, you'll need to specify a path to configure. You can do this with the —exec-prefix option. For example:

$ configure --exec-prefix=/usr

specifies that the bash files will be placed under the /usr directory. Note that configure prefers option arguments be given with an equals sign (=).

After the configuration finishes and you type make, the bash executable is built. A script called bashbug is also generated, which allows you to report bugs in the format the bash maintainers want. We'll look at how you use it later in this chapter.

Once the build finishes, you can see if the bash executable works by typing ./bash. If it doesn't, turn to the Section 11.3 in Chapter 11.

To install bash, type make install. This will create all of the necessary directories (bin, info, man and its subdirectories) and copy the files to them.

If you've installed bash in your home directory, be sure to add your own bin path to your PATH and your own man path to MANPATH.

bash comes preconfigured with nearly all of its features enabled, but it is possible to customize your version by specifying what you want with the —enable- feature and —disable- feature command-line options to configure.

Table 12-1 is a list of the configurable features and a short description of what those features do.

Table 12-1. Configurable features

Feature

Description

alias

Support for aliases.

arith-for-command

Support for the alternate form of the `for' command that behaves like the C language for statement.

array-variables

Support for one dimensional arrays.

bang-history

C-shell-like history expansion and editing.

brace-expansion

Brace expansion.

command-timing

Support for the time command.

cond-command

Support for the [[ conditional command.

cond-regexp

Support for matching POSIX regular expressions using the =~ binary operator in the [[ conditional command.

directory-stack

Support for the pushd, popd, and dirs directory manipulation commands .

disabled-builtins

Whether a built-in can be run with the builtin command, even if it has been disabled with enable -n.

dparen-arithmetic

Support for ((...)) .

help-builtin

Support for the help built-in.

history

History via the fc and history commands .

job-control

Job control via fg, bg, and jobs if supported by the operating system.

multibyte

Support for multibyte characters if the operating system provides the necessary support.

net-redirections

Special handling of filenames of the form /dev/tcp/HOST/PORT and /dev/udp/HOST/PORT when used in redirections.

process-substitution

Whether process substitution occurs, if supported by the operating system.

prompt-string-decoding

Whether backslash escaped characters in PS1, PS2, PS3, and PS4 are allowed .

progcomp

Programmable completion facilities. If readline is not enabled, this option has no effect .

readline

readline editing and history capabilities.

restricted

Support for the restricted shell, the -r option to the shell, and rbash.

select

The select construct.

usg-echo-default

xpg-echo-default

Make echo expand backslash-escaped characters by default, without requiring the -e option. This sets the default value of the xpg_echo shell option to on, which makes the bash echo behave more like the version specified in the Single Unix Specification, Version 2.

The options disabled-builtins and xpg-echo-default are disabled by default. The others are enabled.

Many other shell features can be turned on or off by modifying the file config-.top.h. For further details on this file and configuring bash in general, see INSTALL.

Finally, to clean up the source directory and remove all of the object files and executables, type make clean. Make sure you run make install first, otherwise you'll have to rerun the installation from scratch.

Testing bash

There are a series of tests that can be run on your newly built version of bash to see if it is running correctly. The tests are scripts that are derived from problems reported in earlier versions of the shell. Running these tests on the latest version of bash shouldn't cause any errors.

To run the tests just type make tests in the main bash directory. The name of each test is displayed, along with some warning messages, and then it is run. Successful tests produce no output (unless otherwise noted in the warning messages).

If any of the tests fail, you'll see a list of things that represent differences between what is expected and what happened. If this occurs you should file a bug report with the bash maintainer. See the Section 12.4.2 later in this chapter for information on how to do this.

Potential Problems

Although bash has been installed on a large number of different machines and operating systems, there are occasionally problems. Usually the problems aren't serious and a bit of investigation can result in a quick solution.

If bash didn't compile, the first thing to do is check that configure guessed your machine and operating system correctly. Then check the file NOTES, which contains some information on specific UNIX systems. Also look in INSTALL for additional information on how to give configure specific compilation instructions.

Installing bash as a Login Shell

Having installed bash and made sure it is working correctly, the next thing to do is to make it your login shell. This can be accomplished in two ways.

Individual users can use the chsh (change shell) command after they log in to their accounts. chsh asks for their password and displays a list of shells to choose from. Once a shell is chosen, chsh changes the appropriate entry in /etc/passwd. For security reasons, chsh will only allow you to change to a shell if it exists in the file /etc/shells (if /etc/shells doesn't exist, chsh asks for the pathname of the shell).

Another way to change the login shell is to edit the password file directly. On most systems, /etc/passwd will have lines of the form:

cam:pK1Z9BCJbzCrBNrkjRUdUiTtFOh/:501:100:Cameron Newham:/home/cam:/bin/bash
cc:kfDKDjfkeDJKJySFgJFWErrElpe/:502:100:Cheshire Cat:/home/cc:/bin/bash

As root you can just edit the last field of the lines in the password file to the pathname of whatever shell you choose.

If you don't have root access and chsh doesn't work, you can still make bash your login shell. The trick is to replace your current shell with bash by using exec from within one of the startup files for your current shell.

If your current shell is similar to sh (e.g., ksh), you have to add the line:

[ -f /pathname/bash ] && exec /pathname/bash --login

to your .profile, where pathname is the path to your bash executable.

You will also have to create an empty file called .bash_profile. The existence of this file prevents bash from reading your .profile and re-executing the exec—thus entering an infinite loop. Any initialization code that you need for bash can just be placed in .bash_profile.

If your current shell is similar to csh (e.g., tcsh) things are slightly easier. You just have to add the line:

if ( -f /pathname/bash ) exec /pathname/bash --login

to your .login, where pathname is the path to your bash executable.

Examples

The bash archive also includes an examples directory. This directory contains some subdirectories for scripts, functions, and examples of startup files.

The startup files in the startup-files directory provide many examples of what you can put in your own startup files. In particular, bash_aliases gives many useful aliases. Bear in mind that if you copy these files wholesale, you'll have to edit them for your system because many of the paths will be different. Refer to Chapter 3 for further information on changing these files to suit your needs.

The functions directory contains about 50 files with function definitions that you might find useful. Among them are:

basename

The basename utility, missing from some systems

dirfuncs

Directory manipulation facilities

dirname

The dirname utility, missing from some systems

whatis

An implementation of the Tenth Edition Bourne shell whatis builtin

whence

An almost exact clone of the Korn shell whence builtin

Especially helpful, if you come from a Korn shell background, is kshenv. This contains function definitions for some common Korn facilities such as whence, print, and the two-parameter cd builtins.

The scripts directory contains over 20 examples of bash scripts. The two largest scripts are examples of the complex things you can do with shell scripts. The first is a (rather amusing) adventure game interpreter and the second is a C shell interpreter. The other scripts include examples of precedence rules, a scrolling text display, a "spinning wheel" progress display, and how to prompt the user for a particular type of answer.

Not only are the script and function examples useful for including in your environment, they also provide many alternative examples that you can learn from when reading this book. We encourage you to experiment with them.

[2] This configuration information pertains to bash version 3.0 and later. The configuration and installation for earlier versions is fairly easy, although it differs in certain details. For further information, refer to the INSTALL instructions that came with your version of bash.

Who Do I Turn to?

No matter how good something is or how much documentation comes with it, you'll eventually come across something that you don't understand or that doesn't work. In such cases it can't be stressed enough to carefully read the documentation (in computer parlance: RTFM).[3] In many cases this will answer your question or point out what you're doing wrong.

Sometimes you'll find this only adds to your confusion or confirms that there is something wrong with the software. The next thing to do is to talk to a local bash guru to sort out the problem. If that fails, or there is no guru, you'll have to turn to other means (currently only via the Internet).

Asking Questions

If you have any questions about bash, there are currently two ways to go about getting them answered. You can email questions to bash-maintainers@gnu.org or you can post your question to the USENET newsgroups gnu.bash.bug or comp.unix.shell.

In both cases either the bash maintainer or some knowledgeable person on USENET will give you advice. When asking a question, try to give a meaningful summary of your question in the subject line.

Reporting Bugs

Bug reports should be sent to bug-bash@gnu.org, and include the version of bash and the operating system it is running on, the compiler used to compile bash, a description of the problem, a description of how the problem was produced, and, if possible, a fix for the problem. The best way to do this is with the bashbug script, installed with bash.

Before you run bashbug, make sure you've set your EDITOR environment variable to your favorite editor and have exported it (bashbug defaults to emacs, which may not be installed on your system). When you execute bashbug it will enter the editor with a partially blank report form. Some of the information (bash version, operating system version, etc.) will have been filled in automatically. We'll take a brief look at the form, but most of it is self-explanatory.

The From: field should be filled out with your email address. For example:

From: confused@wonderland.oreilly.com

Next comes the Subject: field; make an effort to fill it out, as this makes it easier for the maintainers when they need to look up your submission. Just replace the line surrounded by square brackets with a meaningful summary of the problem.

The next few lines are a description of the system and should not be touched. Next comes the Description: field. You should provide a detailed description of the problem and how it differs from what is expected. Try to be as specific and concise as possible when describing the problem.

The Repeat-By: field is where you describe how you generated the problem; if necessary, list the exact keystrokes you used. Sometimes you won't be able to reproduce the problem yourself, but you should still fill out this field with the events leading up to the problem. Attempt to reduce the problem to the smallest possible form. For example, if it was a large shell script, try to isolate the section that produced the problem and include only that in your report.

Lastly, the Fix: field is where you can provide the necessary patch to fix the problem if you've investigated it and found out what was going wrong. If you have no idea what caused the problem, just leave the field blank.

Once you've finished filling in the form, save it and exit your editor. The form will automatically be sent to the maintainers.

[3] RTFM stands for "Read The F(laming) Manual."

Appendix A. Related Shells

The fragmentation of the UNIX marketplace has had its advantages and disadvantages. The advantages came mostly in the early days: lack of standardization and proliferation among technically knowledgeable academics and professionals contributed to a healthy "free market" for UNIX software, in which several programs of the same type (e.g., shells, text editors, system administration tools) would often compete for popularity. The best programs would usually become the most widespread, while inferior software tended to fade away.

But often there was no single "best" program in a given category, so several would prevail. This led to the current situation, where multiplicity of similar software has led to confusion, lack of compatibility, and—most unfortunate of all—the inability of UNIX to capture as big a share of the market as other operating platforms (MS-DOS, Microsoft Windows, Novell NetWare, etc.).

The "shell" category has probably suffered in this way more than any other type of software. As we said in the Preface and in Chapter 1, several shells are currently available; the differences between them are often not all that great.

Therefore we felt it necessary to include information on shells similar to bash. This appendix summarizes the differences between bash and the following:

The standard Bourne shell, as a kind of "baseline"

The IEEE POSIX 1003.2 shell Standard, to which bash adheres and other shells will adhere in the future

The Korn shell (ksh), a popular commercial shell provided with many UNIX systems

pdksh, a widely used public domain Korn shell

zsh, a popular alternative to bash and the Korn shell

The Bourne Shell

bash is almost completely backward-compatible with the Bourne shell. The only significant feature of the latter that bash doesn't support is ^ (caret) as a synonym for the pipe (|) character. This is an archaic feature that the Bourne shell includes for its own backward compatibility with earlier shells. No modern UNIX version has any shell code that uses ^ as a pipe.

To describe the differences between the Bourne shell and bash, we'll go through each chapter of this book and enumerate the features discussed in the chapter that the Bourne shell does not support. Although some versions of the Bourne shell exist that include a few bash features,[1] we refer to the standard Bourne shell that has been around for many years.

Chapter 1

The cd - form of the cd command; tilde (~) expansion; the jobs command; the help built-in.

Chapter 2

All. (That is, the Bourne shell doesn't support any of the readline, history, and editing features discussed in this chapter.)

Chapter 3

Aliases; prompt string customization; set options. The Bourne shell supports only the following: -e, -k, -n, -t, -u, -v, -x, and -. It doesn't support option names (-o). The shopt built-in. Environment files aren't supported. The following built-in variables aren't supported:

All variables beginning with BASH_

All variables beginning with COMP

CDPATH

DIRSTACK

FCEDIT

FUNCNAME

GROUPS

HISTCMD

HISTCONTROL

HISTFILE

HISTIGNORE

HISTSIZE

HISTFILESIZE

HOSTFILE

HOSTNAME

HOSTTYPE

IGNOREEOF

INPUTRC

LANG

LC_ALL

LC_COLLATE

LC_MESSAGES

LINENO

MACHTYPE

MAILCHECK

OLDPWD

OPTARG

OPTERR

OPTIND

OSTYPE

PIPESTATUS

PS3

PS4

POSIXLY_CORRECT

PROMPT_COMMAND

PWD

RANDOM

REPLY

SECONDS

SHELLOPTS

SHLVL

TIMEFORMAT

TMOUT

auto_resume

histchars

Chapter 4

Functions; the type command; the local command; the ${#parameter} operator; pattern-matching variable operators (%, %%, #, ##). Extended pattern matching. Command-substitution syntax is different: use the older ` command ` instead of $( command). The built-in pushd and popd commands.

Chapter 5

The ! keyword; the select construct isn't supported. The Bourne shell return doesn't exit a script when it is sourced with . (dot).

Chapter 6

Use the external command getopt instead of getopts, but note that it doesn't really do the same thing. Integer arithmetic isn't supported: use the external command expr instead of the $(( arithmetic-exp )) syntax. The arithmetic conditional (( arithmetic-exp )) isn't supported; use the old condition test syntax and the relational operators -lt, -eq, etc. Array variables are not supported. declare and let aren't supported.

Chapter 7

The command, builtin, and enable built-ins. The -e and -E options to echo are not supported. The I/O redirectors >| and <> are not supported. None of the options to read is supported. printf is usually available as an external command.

Chapter 8

Job control—specifically, the jobs, fg, and bg commands. Job number notation with %, i.e., the kill and wait commands only accept process IDs. The - option to trap (reset trap to the default for that signal). trap only accepts signal numbers, not logical names. The disown built-in.

Chapter 9

The DEBUG, ERR, and RETURN fake signals are not supported. The EXIT fake signal is supported as signal 0.

Chapter 10

The ulimit command and privileged mode aren't supported. The -S option to umask is not supported. The Bourne shell's restrictive counterpart, rsh, only inhibits assignment to PATH.

[1] For example, the Bourne shell distributed with System V supports functions and a few other shell features common to bash and the Korn shell.

The IEEE 1003.2 POSIX Shell Standard

There have been many attempts to standardize UNIX. Hardware companies' monolithic attempts at market domination, fragile industry coalitions, marketing failures, and other such efforts are the stuff of history—and the stuff of frustration.

Only one standardization effort has not been tied to commercial interests: the Portable Operating System Interface, known as POSIX. This effort started in 1981 with the /usr/group (now UniForum) Standards Committee, which produced the /usr/group Standard three years later. The list of contributors grew to include the Institute of Electrical and Electronic Engineers (IEEE) and the International Organization for Standardization (ISO).

The first POSIX standard was published in 1988. This one, called IEEE P1003.1, covers low-level issues at the system-call level. IEEE P1003.2, covering the shell, utility programs, and user interface issues, was ratified in September 1992 after a six-year effort. In September 2001, a joint revision of both standards was approved. The new standard, covering all the material in the two earlier separate documents, became known as IEEE Standard 1003.1-2001. The latest version of the standard is 1003.1-2004.

The POSIX standards were never meant to be rigid and absolute. The committee members certainly weren't about to put guns to the heads of operating system implementers and force them to adhere. Instead, the standards are designed to be flexible enough to allow for both coexistence of similar available software, so that existing code isn't in danger of obsolescence, and the addition of new features, so that vendors have the incentive to innovate. In other words, they are supposed to be the kind of third-party standards that vendors might actually be interested in following.

As a result, most UNIX vendors currently comply with both standards. bash is no exception; it is almost 100% POSIX-compliant.

The shell part of the standard describes utilities that must be present on all systems, and others that are optional, depending upon the nature of the system. One such option is the User Portability Utilities option, which defines standards for interactive shell use and interactive utilities like the vi editor. The standard—on the order of 2,000 pages—is available through the IEEE; for information, contact the IEEE:

IEEE Customer Service
445 Hoes Lane, PO Box 1331
Piscataway, NJ 08855-1331
(800) 678-IEEE (United States and Canada)
(732) 981-0060 (international/local)
(732) 981-9667 (fax)

customer.service@ieee.org
http://www.standards.ieee.org/catalog/ordering.html

The committee members had two motivating factors to weigh when they designed the shell standard. On the one hand, the design had to accommodate, as much as possible, existing shell code written under various Bourne-derived shells (the Version 7, System V, BSD, and Korn shells). These shells are different in several extremely subtle ways, most of which have to do with the ways certain syntactic elements interact with each other.

It must have been quite difficult and tedious to spell out these differences, let alone to reach compromises among them. Throw in biases of some committee members towards particular shells, and you might understand why it took six years to ratify the first 1003.2 standard and further years to merge the standards.

On the other hand, the shell design had to serve as a standard on which to base future shell implementations. This implied goals of simplicity, clarity, and precision—objectives that seem especially elusive in the context of the above problems.

The designers found one way of ameliorating this dilemma: they decided that the standard should include not only the features included in the shell, but also those explicitly omitted and those included but with unspecified functionality. The latter category allows some of the existing shells' innovations to "sneak through" without becoming part of the standard, while listing omitted features helps programmers determine which features in existing shell scripts won't be portable to future shells.

The POSIX standard is primarily based on the System V Bourne shell, which is a superset of the Version 7 shell discussed earlier in this appendix. Therefore you should assume that bash features that aren't present in the Bourne shell also aren't included in the POSIX standard.

The following bash features are left "unspecified" in the standard, meaning that their syntax is acceptable but their functionality is not standardized:

The other syntax for functions shown in Chapter 4 is supported; see the following discussion.

The [[...]] syntax for conditional tests. The external test or [...] utility should be used instead.

The select control structure.

Code blocks ({...}) are supported, but for maximum portability, the curly brackets should be quoted (for reasons too complicated to go into here).

Signal numbers are only allowed if the numbers for certain key signals (INT, TERM, and a few others) are the same as on the most important historical versions of UNIX. In general, shell scripts should use symbolic names for signals.

The POSIX standard supports functions, but the semantics are weaker: it is not possible to define local variables, and functions can't be exported.

The command lookup order has been changed to allow certain built-in commands to be overridden by functions. Built-in commands are divided into two sets by their positions in the command lookup order: some are processed before functions, some after. Specifically, the built-in commands break, : (do nothing), continue, .(source), eval, exec, exit, export, readonly, return, set, shift, trap, and unset take priority over functions.

Finally, because the POSIX standard is meant to promote shell script portability, it avoids mentioning certain fundamental implementation issues: in particular, there is no requirement that multitasking be used for background jobs, subshells, etc. This was done to allow portability to non-multitasking systems like MS-DOS, so that shells on these systems can be POSIX-compliant.

The Korn Shell

One of the first major alternatives to the "traditional" shells, Bourne and C, was the Korn shell, publicly released in 1986 as part of AT&T's "Experimental Toolchest." The Korn shell was written by David Korn at AT&T. The first version was unsupported, but eventually UNIX System Laboratories (USL) decided to give it support when they released it with their version of UNIX (System V Release 4) in 1989. The November 1988 Korn shell is the most widely used version of this shell.

The 1988 release is not fully POSIX-compliant—less so than bash. The latest release (1993) has brought the Korn shell into better compliance as well as providing more features and streamlining existing features.

The 1993 Korn shell and bash share many features, but there are some important differences in the Korn shell:

Functions are more like separate entities than part of the invoking shell (traps and options are not shared with the invoking shell).

Associative arrays are supported.

Floating-point numbers and expressions are supported.

Coroutines are supported. Two processes can communicate with one another by using the print and read commands.

The command print replaces echo. print can have a file descriptor specified and can be used to communicate with coroutines.

Function autoloading is supported. Functions are read into memory only when they are called.

One-dimensional arrays are supported, although they are limited in size (4,096 elements in early versions of ksh93, 64K elements in later releases).

The history list is kept in a file rather than in memory. This allows concurrent instantiations of the shell to access the same history list, a possible advantage in certain circumstances.

There is no default startup file. If the environment variable ENV is not defined, nothing is read.

The type command is replaced with the more restrictive whence.

The primary prompt string (PS1) doesn't allow escaped commands.

There is no built-in equivalent to enable.

There is no provision for key bindings and no direct equivalent to readline.

There are no built-in equivalents to pushd, popd, and dirs. They have to be defined as functions if you want them.

The history substitution mechanism is not supported.

Prompt strings don't allow backslash-escaped special characters.

Many of the bash environment variables don't exist.

In addition, the startup and environment files for Korn are different, consisting of .profile and the file specified by the ENV variable. The default environment file can be overridden by using the variable ENV. There is no logout file.

For a more detailed list of the differences between bash and the Korn shell see the FAQ file in the doc directory of the bash archive.

The Korn shell is a good alternative to bash. Its only major drawback is that it is upgraded only every few years.

pdksh

pdksh (Public Domain Korn shell) is a version of the Korn shell that is a free alternative to bash. pdksh is available as source code in various places on the Internet, including the USENET newsgroup comp.sources.unix, and the pdksh home page http://www.cs.mun.ca/~michael/pdksh/ of the current maintainer, Michael Rendell.

pdksh was originally written by Eric Gisin, who based it on Charles Forsyth's public domain Version 7 Bourne shell. It has all Bourne shell features plus some of the POSIX extensions and a few features of its own.

pdksh's additional features include user-definable tilde notation, in which you can set up ~ as an abbreviation for anything, not just usernames.

Otherwise, pdksh lacks a few features of the official Korn version and bash. In particular, it lacks the following bash features:

The built-in variable PS4

The advanced I/O redirectors >| and <>

The options errexit, noclobber, and privileged

One important advantage that pdksh has over bash is that the executable is only about a third the size and it runs considerably faster. Weighed against this is that it is less POSIX-compliant, has had numerous people add code to it (so it hasn't been as strongly controlled as bash), and isn't as polished a product as bash (for example, the documentation isn't anywhere near as detailed or complete).

However, pdksh is a worthwhile alternative for those who want something other than bash and can't obtain the Korn shell.

zsh

zsh is a powerful interactive shell and scripting language with many features found in bash, ksh, and tcsh, as well as several unique features.

zsh was originally written by Paul Falsted in the early 1990s and is now maintained by various people.

It is freely available and should compile and run on just about any modern version of Unix. Ports for other operating systems are also available. The zsh home page is http://www.zsh.org. The current version is 4.2.1.

Some of the main differences between bash and zsh are:

Extended globbing capabilities

A slightly more advanced textual completion system

A powerful multi-line command line editor

Various visual bells and whistles, such as command prompt color and placement

zsh is a good alternative to bash, especially for "power users."

Shell Clones and Unix-like Platforms

The proliferation of shells has not stopped at the boundaries of UNIX-dom. Many programmers who got their initial experience on UNIX systems and subsequently crossed over into the PC world wished for a nice UNIX-like environment. It's not surprising then that several UNIX shell-style interfaces to small-computer operating systems have appeared, Bourne shell emulations among them.

In the past several years, not only shell clones have appeared, but entire Unix "environments." Two of them use shells that we've already discussed. Two others provide their own shell reimplementations. Providing lists of major and minor differences is counterproductive. Instead, this section describes each environment in turn (in alphabetical order), along with contact and Internet download information.

Cygwin

Cygnus Consulting (now part of Red Hat) created the cygwin environment. First creating cgywin.dll, a shared library that provides Unix system call emulation, they ported a large number of GNU utilities to various versions of Microsoft Windows. The greatest functionality comes under Windows/NT, Windows 2000, and Windows XP, although the environment can and does work under Windows 95/98/ME, as well.

The cygwin environment uses bash for its shell, GCC for its C compiler, and the rest of the GNU utilities for its Unix toolset. A sophisticated mount command provides a mapping of the Windows C:\path notation to Unix filenames.

The cygwin project can be found at http://www.cygwin.com.

DJGPP

The DJGPP suite provides 32-bit GNU tools for the MS-DOS environment. To quote the web page:

DJGPP is a complete 32-bit C/C++ development system for Intel 80386 (and higher) PCs running MS-DOS. It includes ports of many GNU development utilities. The development tools require a 80386 or newer computer to run, as do the programs they produce. In most cases, the programs it produces can be sold commercially without license or royalties.

The name comes from the initials of D.J. Delorie, who ported the GNU C++ compiler, g++ to MS-DOS, and the text initials of g++, GPP. It grew into essentially a full Unix environment on top of MS-DOS, with all the GNU tools and bash as its shell. Unlike cygwin or UWIN (see later in this Appendix), you don't need a version of Windows, just a full 32-bit processor and MS-DOS. (Although, of course, you can use DJGPP from within a Windows MS-DOS window.) The web site is http://www.delorie.com/djgpp/.

MKS Toolkit

Perhaps the most established Unix environment for the PC world is the MKS Toolkit from Mortice Kern Systems:

MKS Canada - Corporate Headquarters
410 Albert Street
Waterloo, ON  N2L 3V3
Canada
+1 519 884-2251
+1 519 884-8861 (fax)
+1 800 265-2797 (sales)
http://www.mks.com

The MKS Toolkit comes in various versions depending upon the development environment and the number of developers who will be using it. It includes a shell that is POSIX-compliant, along with just about all the features of the 1988 Korn shell, as well as over 300 utilities, such as awk, perl, vi, make, etc. Their library supports over 1,500 Unix APIs, making it extremely complete and easy to port to the Windows environment. More information is available at http://www.mkssoftware.com/products/tk/ds_tkdev.asp.

AT&T UWIN

The UWIN package is a project by David Korn and his colleagues to make a Unix environment available under Microsoft Windows. It is similar in structure to cygwin, discussed earlier. A shared library, posix.dll, provides emulation of the Unix system call APIs. The system call emulation is quite complete. An interesting twist is that the Windows registry can be accessed as a filesystem under /reg. On top of the Unix API emulation, ksh93 and over 200 Unix utilities (or rather, re-implementations) have been compiled and run. The UWIN environment relies on the native Microsoft Visual C/C++ compiler, although the GNU development tools are available for download and use with UWIN.

The project can be found at http://www.research.att.com/sw/tools/uwin/. The web site describes what is available, with links for downloading binaries, as well as information on commercial licensing of the UWIN package. Also included are links to various papers on UWIN, additional useful software, and links to other, similar packages.

Appendix B. Reference Lists

Invocation

Table B-1 and Table B-2 list the options you can use when invoking current versions of bash and the older 1.x version, respectively.[1] The multicharacter options must appear on the command line before the single-character options. In addition to these, any set option can be used on the command line; see Table B-7. Login shells are usually invoked with the options -i (interactive), -s (read from standard input), and -m (enable job control).

Table B-1. Command-line options

Option

Meaning

-c string

Commands are read from string, if present. Any arguments after string are interpreted as positional parameters, starting with $0.

-D

A list of all double-quoted strings preceded by $ is printed on the standard ouput. These are the strings that are subject to language translation when the current locale is not C or POSIX. This also turns on the -n option.

-i

Interactive shell. Ignores signals TERM, INT, and QUIT. With job control in effect, TTIN, TTOU, and TSTP are also ignored.

-l

Makes bash act as if invoked as a login shell.

-o option

Takes the same arguments as set -o.

-O, +O shopt-option

shopt-option is one of the shell options accepted by the shopt builtin. If shopt-option is present, -O sets the value of that option; +O unsets it. If shopt-option is not supplied, the names and values of the shell options accepted by shopt are printed on the standard output. If the invocation option is +O, the output is displayed in a format that may be reused as input.

-s

Reads commands from the standard input. If an argument is given to bash, this flag takes precedence (i.e., the argument won't be treated as a script name and standard input will be read).

-r

Restricted shell. See Chapter 10.

-v

Prints shell input lines as they're read.

-

Signals the end of options and disables further option processing. Any options after this are treated as filenames and arguments. — is synonymous with -.

—debugger

Arranges for the debugger profile to be executed before the shell starts. Turns on extended debugging mode and shell function tracing.[2]

—dump-strings

Does the same as -D.

—dump-po-strings

Does the same as -D but the output is in the GNU gettext po (portable object) file format.

—help

Displays a usage message and exits.

—login

Makes bash act as if invoked as a login shell. Same as -l.

—noediting

Does not use the GNU readline library to read command lines if interactive.

—noprofile

Does not read the startup file /etc/profile or any of the personal initialization files.

—norc

Does not read the initialization file ~/.bashrc if the shell is interactive. This is on by default if the shell is invoked as sh.

—posix

Changes the behavior of bash to follow the POSIX guidelines more closely where the default operation of bash is different.

—quiet

Shows no information on shell startup. This is the default.

—rcfile file, —init-file file

Executes commands read from file instead of the initialization file ~/.bashrc, if the shell is interactive.

—verbose

Equivalent to -v.

—version

Shows the version number of this instance of bash and then exits.

[2] Only available in bash version 3.0 and later.

Table B-2. Old command-line options

Option

Meaning

-c string

Commands are read from string, if present. Any arguments after string are interpreted as positional parameters, starting with $0.

-i

Interactive shell. Ignores signals TERM, INT, and QUIT. With job control in effect, TTIN, TTOU, and TSTP are also ignored.

-s

Reads commands from the standard input. If an argument is given to bash, this flag takes precedence (i.e., the argument won't be treated as a script name and standard input will be read).

-r

Restricted shell. See Chapter 10.

-

Signals the end of options and disables further option processing. Any options after this are treated as filenames and arguments. — is synonymous with -.

-norc

Does not read the initialization file ~/.bashrc if the shell is interactive. This is on by default if the shell is invoked as sh.

-noprofile

Does not read the startup file /etc/profile or any of the personal initialization files.

-rcfile file

Executes commands read from file instead of the initialization file ~/.bashrc, if the shell is interactive.

-version

Shows the version number of this instance of bash when starting.

-quiet

Shows no information on shell startup. This is the default.

-login

Makes bash act as if invoked as a login shell.

-nobraceexpansion

Does not perform curly brace expansion.

-nolineediting

Does not use the GNU readline library to read command lines if interactive.

-posix

Changes the behavior of bash to follow the POSIX guidelines more closely where the default operation of bash is different.

[1] At the time of writing, the old 1.x versions of bash are still used. We strongly recommend that you upgrade to the latest version. We have included a table of old options (Table B-2) just in case you encounter an old version of the shell.

Prompt String Customizations

Table B-3 shows a summary of the prompt customizations that are available. The customizations \[ and \] are not available in bash versions prior to 1.14. \a, \e, \H, \T, \@, \v, and \V are not available in versions prior to 2.0. \A, \D, \j, \l, and \r are only available in later versions of bash 2.0 and in bash 3.0.

Table B-3. Prompt string customizations

Command

Meaning

\a

The ASCII bell character (007)

\A

The current time in 24-hour HH:MM format

\d

The date in "Weekday Month Day" format

\D {format}

The format is passed to strftime(3) and the result is inserted into the prompt string; an empty format results in a locale-specific time representation; the braces are required

\e

The ASCII escape character (033)

\H

The hostname

\h

The hostname up to the first "."

\j

The number of jobs currently managed by the shell

\l

The basename of the shell's terminal device name

\n

A carriage return and line feed

\r

A carriage return

\s

The name of the shell

\T

The current time in 12-hour HH:MM:SS format

\t

The current time in HH:MM:SS format

\@

The current time in 12-hour a.m./p.m. format

\u

The username of the current user

\v

The version of bash (e.g., 2.00)

\V

The release of bash; the version and patchlevel (e.g., 3.00.0)

\w

The current working directory

\W

The basename of the current working directory

\#

The command number of the current command

\!

The history number of the current command

\$

If the effective UID is 0, print a #, otherwise print a $

\nnn

Character code in octal

\\

Print a backslash

\[

Begin a sequence of non-printing characters, such as terminal control sequences

\]

End a sequence of non-printing characters

Built-In Commands and Reserved Words

Table B-4 shows a summary of all built-in commands and reserved words. The letters in the Type column of the table have the following meanings: R = reserved word, blank = Builtin.

Table B-4. Commands and reserved words

Command

Chapter

Type

Summary

!

5

R

Logical NOT of a command exit status.

:

7

Do nothing (just do expansions of any arguments).

.

4

Read file and execute its contents in current shell.

alias

3

Set up shorthand for command or command line.

bg

8

Put job in background.

bind

2

Bind a key sequence to a readline function or macro.

break

5

Exit from surrounding for, select, while, or until loop.

builtin

5

Execute the specified shell built-in.

case

5

R

Reserved word. Multi-way conditional construct.

cd

1

Change working directory.

command

7

Run a command bypassing shell function lookup.

compgen

D

Generate possible completion matches.

complete

D

Specify how completion should be performed.

continue

Skip to next iteration of for, select, while, or until loop.

declare

6

Declare variables and give them attributes.

dirs

6

Display the list of currently remembered directories.

disown

8

Remove a job from the job table.

do

5

R

Part of a for, select, while, or until looping construct.

done

5

R

Part of a for, select, while, or until looping construct.

echo

4

Expand and print any arguments.

elif

5

R

Part of an if construct.

else

5

R

Part of an if construct.

enable

7

Enable and disable built-in shell commands.

esac

5

R

Part of a case construct.

eval

7

Run the given arguments through command-line processing.

exec

9

Replace the shell with the given program.

exit

5

Exit from the shell.

export

3

Create environment variables.

fc

2

Fix command (edit history file).

fg

8

Put background job in foreground.

fi

5

R

Part of an if construct.

for

5

R

Looping construct.

function

4

R

Define a function.

getopts

6

Process command-line options.

hash

3

Full pathnames are determined and remembered.

help

1

Display helpful information on built-in commands.

history

1

Display command history.

if

5

R

Conditional construct.

in

5

R

Part of a case construct.

jobs

1

List any background jobs.

kill

8

Send a signal to a process.

let

6

Arithmetic variable assignment.

local

4

Create a local variable.

logout

1

Exits a login shell.

popd

4

Removes a directory from the directory stack.

pushd

4

Adds a directory to the directory stack.

pwd

1

Print the working directory.

read

7

Read a line from standard input.

readonly

6

Make variables read-only (unassignable).

return

5

Return from the surrounding function or script.

select

5

R

Menu-generation construct.

set

3

Set options.

shift

6

Shift command-line arguments.

suspend

Suspend execution of a shell.

test

5

Evaluates a conditional expression.

then

5

R

Part of an if construct.

time

R

Run command pipeline and print execution times. The format of the output can be controlled with TIMEFORMAT.

times

Print the accumulated user and system times for processes run from the shell.

trap

8

Set up a signal-catching routine.

type

3

Identify the source of a command.

typeset

6

Declare variables and give them attributes. Same as declare.

ulimit

10

Set/show process resource limits.

umask

10

Set/show file permission mask.

unalias

3

Remove alias definitions.

unset

3

Remove definitions of variables or functions.

until

5

R

Looping construct.

wait

8

Wait for background job(s) to finish.

while

5

R

Looping construct.

Built-In Shell Variables

Table B-5 shows a complete list of environment variables available in bash 3.0. The letters in the Type column of the table have the following meanings: A = Array, L = colon separated list, R = read-only, U = unsetting it causes it to lose its special meaning.

Note that the variables beginning BASH_, beginning COMP, DIRSTACK, FUNCNAME, GLOBIGNORE, GROUPS, HISTIGNORE, HOSTNAME, HISTTIMEFORMAT, LANG, LC_ALL, LC_COLLATE, LC_MESSAGE, MACHTYPE, PIPESTATUS, SHELLOPTS, and TIMEFORMAT are not available in versions prior to 2.0. BASH_ENV replaces ENV found in earlier versions.

Table B-5. Environment variables

Variable

Chapter

Type

Description

*

4

R

The positional parameters given to the current script or function.

@

4

R

The positional parameters given to the current script or function.

#

4

R

The number of arguments given to the current script or function.

-

R

Options given to the shell on invocation.

?

5

R

Exit status of the previous command.

R

Last argument to the previous command.

$

8

R

Process ID of the shell process.

!

8

R

Process ID of the last background command.

0

4

R

Name of the shell or shell script.

BASH

3

The full pathname used to invoke this instance of bash.

BASH_ARGC

9

A

An array of values which are the number of parameters in each frame of the current bash execution call stack. The number of parameters to the current subroutine (shell function or script executed with . or source) is at the top of the stack.

BASH_ARGV

9

A

All of the parameters in the current bash execution call stack. The final parameter of the last subroutine call is at the top of the stack; the first parameter of the initial call is at the bottom.

BASH_COMMAND

9

The command currently being executed or about to be executed, unless the shell is executing a command as the result of a trap, in which case it is the command executing at the time of the trap.

BASH_EXECUTION_STRING

The command argument to the -c invocation option.

BASH_ENV

3

The name of a file to run as the environment file when the shell is invoked.

BASH_LINENO

9

A

An array whose members are the line numbers in source files corresponding to each member of @var{FUNCNAME}. ${BASH_LINENO[$i]} is the line number in the source file where ${FUNCNAME[$i + 1]} was called. The corresponding source file name is ${BASH_SOURCE[$i + 1]}.

BASH_REMATCH

AR

An array whose members are assigned by the =~ binary operator to the [[ conditional command. The element with index 0 is the portion of the string matching the entire regular expression. The element with index n is the portion of the string matching the nth parenthesized subexpression.

BASH_SOURCE

9

A

An array containing the source filenames corresponding to the elements in the FUNCNAME array variable.

BASH_SUBSHELL

Incremented by one each time a subshell or subshell environment is spawned. The initial value is 0.

BASH_VERSION

3

The version number of this instance of bash.

BASH_VERSINFO

3,6

AR

Version information for this instance of bash. Each element of the array holds parts of the version number.

CDPATH

3

L

A list of directories for the cd command to search.

COMP_CWORD

An index into ${COMP_WORDS} of the word containing the current cursor position. This variable is available only in shell functions invoked by the programmable completion facilities.

COMP_LINE

The current command line. This variable is available only in shell functions and external commands invoked by the programmable completion facilities.

COMP_POINT

The index of the current cursor position relative to the beginning of the current command. If the current cursor position is at the end of the current command, the value of this variable is equal to ${#COMP_LINE}. This variable is available only in shell functions and external commands invoked by the programmable completion facilities.

COMP_WORDBREAKS

U

The set of characters that the Readline library treats as word separators when performing word completion. If COMP_WORDBREAKS is unset, it loses its special properties, even if it is subsequently reset.

COMP_WORDS

A

An array of the individual words in the current command line. This variable is available only in shell functions invoked by the programmable completion facilities.

COMPREPLY

A

The possible completions generated by a shell function invoked by the programmable completion facility.

DIRSTACK

4,6

ARU

The current contents of the directory stack.

EUID

R

The effective user ID of the current user.

FUNCNAME

9

ARU

An array containing the names of all shell functions currently in the execution call stack. The element with index 0 is the name of any currently-executing shell function. The bottom-most element is "main". This variable exists only when a shell function is executing.

FCEDIT

2

The default editor for the fc command.

FIGNORE

L

A list of names to ignore when doing filename completion.

GLOBIGNORE

L

A list of patterns defining filenames to ignore during pathname expansion.

GROUPS

AR

An array containing a list of groups of which the current user is a member.

IFS

7

The Internal Field Separator: a list of characters that act as word separators. Normally set to SPACE, TAB, and NEWLINE.

HISTCMD

3

U

The history number of the current command.

HISTCONTROL

3

A list of patterns, separated by colons (:), which can have the following values. ignorespace: lines beginning with a space are not entered into the history list. ignoredups: lines matching the last history line are not entered. erasedups: all previous lines matching the current line to are removed from the history list before the line is saved. ignoreboth: enables both ignorespace and ignoredups.

HISTFILE

2

The name of the command history file.

HISTIGNORE

3

A list of patterns to decide what should be retained in the history list.

HISTSIZE

2

The number of lines kept in the command history.

HISTFILESIZE

3

The maximum number of lines kept in the history file.

HISTTIMEFORMAT

3

If set and not null, its value is used as a format string for strftime(3) to print the time stamp associated with each history entry displayed by the history builtin. If this variable is set, time stamps are written to the history file so they may be preserved across shell sessions.

HOME

3

The home (login) directory.

HOSTFILE

3

The file to be used for hostname completion.

HOSTNAME

The name of the current host.

HOSTTYPE

3

The type of machine bash is running on.

IGNOREEOF

3

The number of EOF characters received before exiting an interactive shell.

INPUTRC

2

The readline startup file.

LANG

Used to determine the locale category for any category not specifically selected with a variable starting with LC_.

LC_ALL

Overrides the value of LANG and any other LC_ variable specifying a locale category.

LC_COLLATE

Determines the collation order used when sorting the results of pathname expansion.

LC_CTYPE

Determines the interpretation of characters and the behavior of character classes within pathname expansion and pattern matching.

LC_MESSAGES

This variable determines the locale used to translate double-quoted strings preceded by a $.

LC_NUMERIC

Determines the locale category used for number formatting.

LINENO

9

U

The number of the line that just ran in a script or function.

MACHTYPE

A string describing the system on which bash is executing.

MAIL

3

The name of the file to check for new mail.

MAILCHECK

3

How often (in seconds) to check for new mail.

MAILPATH

3

L

A list of file names to check for new mail, if MAIL is not set.

OLDPWD

3

The previous working directory.

OPTARG

6

The value of the last option argument processed by getopts.

OPTERR

6

If set to 1, display error messages from getopts.

OPTIND

6

The number of the first argument after options.

OSTYPE

The operating system on which bash is executing.

PATH

3

L

The search path for commands.

PIPESTATUS

6

A

An array variable containing a list of exit status values from the processes in the most recently executed foreground pipeline.

POSIXLY_CORRECT

If in the environment when bash starts, the shell enters posix mode before reading the startup files, as if the —posix invocation option had been supplied. If it is set while the shell is running, bash enables posix mode, as if the command set -o posix had been executed.

PROMPT_COMMAND

The value is executed as a command before the primary prompt is issued.

PS1

3

The primary command prompt string.

PS2

3

The prompt string for line continuations.

PS3

5

The prompt string for the select command.

PS4

9

The prompt string for the xtrace option.

PPID

8

R

The process ID of the parent process.

PWD

3

The current working directory.

RANDOM

9

U

A random number between 0 and 32767 (215-1).

REPLY

5, 7

The user's response to the select command; result of the read command if no variable names are given.

SECONDS

3

U

The number of seconds since the shell was invoked.

SHELL

3

The full pathname of the shell.

SHELLOPTS

LR

A list of enabled shell options.

SHLVL

Incremented by one each time an instance of bash is invoked.

TIMEFORMAT

Specifies the format for the output from using the time reserved word on a command pipeline.

TMOUT

10

If set to a positive integer, the number of seconds after which the shell automatically terminates if no input is received.

UID

R

The user ID of the current user.

auto_resume

Controls how job control works.

histchars

Specifies what to use as the history control characters. Normally set to the string `!^#'.

Test Operators

Table B-6 lists the operators that are used with test and the [...] and [[...]] constructs. They can be logically combined with -a ("and") and -o ("or") and grouped with escaped parenthesis (\( ... \)). The string comparisons < and > and the [[...]] construct are not available in versions of bash prior to 2.0.

Table B-6. Test operators

Operator

True if...

-a file

file exists

-b file

file exists and is a block device file

-c file

file exists and is a character device file

-d file

file exists and is a directory

-e file

file exists; same as -a

-f file

file exists and is a regular file

-g file

file exists and has its setgid bit set

-G file

file exists and is owned by the effective group ID

-h file

file exists and is a symbolic link

-k file

file exists and has its sticky bit set

-L file

file exists and is a symbolic link

-n string

string is non-null

-N file

file was modified since it was last read

-O file

file exists and is owned by the effective user ID

-p file

file exists and is a pipe or named pipe (FIFO file)

-r file

file exists and is readable

-s file

file exists and is not empty

-S file

file exists and is a socket

-t N

File descriptor N points to a terminal

-u file

file exists and has its setuid bit set

-w file

file exists and is writeable

-x file

file exists and is executable, or file is a directory that can be searched

-z string

string has a length of zero

fileA -nt fileB

fileA modification time is newer than fileB

fileA -ot fileB

fileA modification time is older than fileB

fileA -ef fileB

fileA and fileB point to the same file

stringA = stringB

stringA equals stringB (POSIX version)

stringA == stringB

stringA equals stringB

stringA != stringB

stringA does not match stringB

stringA =~ regexp

stringA matches the extended regular expression regexp[3]

stringA < stringB

stringA sorts before stringB lexicographically

stringA > stringB

stringA sorts after stringB lexicographically

exprA -eq exprB

Arithmetic expressions exprA and exprB are equal

exprA -ne exprB

Arithmetic expressions exprA and exprB are not equal

exprA -lt exprB

exprA is less than exprB

exprA -gt exprB

exprA is greater than exprB

exprA -le exprB

exprA is less than or equal to exprB

exprA -ge exprB

exprA is greater than or equal to exprB

exprA -a exprB

exprA is true and exprB is true

exprA -o exprB

exprA is true or exprB is true

[3] Only available in bash version 3.0 and later. May only be used inside [[...]].

set Options

Table B-7 lists the options that can be turned on with the set - arg command. All are initially off except where noted. Full Names, where listed, are arguments to set that can be used with set -o. The Full Names braceexpand, histexpand, history, keyword, and onecmd are not available in versions of bash prior to 2.0. Also, in those versions, hashing is switched with -d.

Table B-7. Options to set

Option

Full name

Meaning

-a

allexport

Export all subsequently defined or modified variables.

-B

braceexpand

The shell performs brace expansion. This is on by default.

-b

notify

Report the status of terminating background jobs immediately.

-C

noclobber

Don't allow redirection to overwrite existing files.

-E

errtrace

Any trap on ERR is inherited by shell functions, command substitutions, and commands executed in a subshell environment.

-e

errexit

Exit the shell when a simple command exits with non-zero status. A simple command is a command not part of a while, until, or if; or part of a && or || list; or a command whose return value is inverted by !.

emacs

Use emacs-style command-line editing.

-f

noglob

Disable pathname expansion.

-H

histexpand

Enable ! style history substitution. On by default in an interactive shell.

history

Enable command history. On by default in interactive shells.

-h

hashall

Disable the hashing of commands.

ignoreeof

Disallow CTRL-D to exit the shell.

-k

keyword

Place keyword arguments in the environment for a command.

-m

monitor

Enable job control (on by default in interactive shells).

-n

noexec

Read commands and check syntax but do not execute them. Ignored for interactive shells.

-P

physical

Do not follow symbolic links on commands that change the current directory. Use the physical directory.

-p

privileged

Script is running in suid mode.

pipefail

The return value of a pipeline is the value of the last (rightmost) command to exit with a non-zero status, or zero if all commands in the pipeline exit successfully. This option is disabled by default.

posix

Change the default behavior to that of POSIX 1003.2 where it differs from the standard.

-T

functrace

Any trap on DEBUG is inherited by shell functions, command substitutions, and commands executed in a subshell environment.

-t

onecmd

Exit after reading and executing one command.

-u

nounset

Treat undefined variables as errors, not as null.

-v

verbose

Print shell input lines before running them.

vi

Use vi-style command-line editing.

-x

xtrace

Print commands (after expansions) before running them.

-

Signals the end of options. All remaining arguments are assigned to the positional parameters. -x and -v are turned off. If there are no remaining arguments to set, the positional arguments remain unchanged.

—

With no arguments following, unset the positional parameters. Otherwise, the positional parameters are set to the following arguments (even if they begin with -).

shopt Options

The shopt options are set with shopt -s arg and unset with shopt -u arg. See Table B-8 for options to shopt. Versions of bash prior to 2.0 had environment variables to perform some of these settings. Setting them equated to shopt -s.

The variables (and corresponding shopt options) were: allow_null_glob_expansion (nullglob), cdable_vars (cdable_vars), command_oriented_history (cmdhist), glob_dot_filenames (dotglob), no_exit_on_failed_exec (execfail). These variables no longer exist.

The options extdebug, failglob, force_fignore, and gnu_errfmt are not available in versions of bash prior to 3.0.

Table B-8. Options to shopt

Option

Meaning if set

cdable_vars

An argument to cd that is not a directory is assumed to be the name of a variable whose value is the directory to change to.

cdspell

Minor errors in the spelling of a directory supplied to the cd command will be corrected if there is a suitable match. This correction includes missing letters, incorrect letters, and letter transposition. It works for interactive shells only.

checkhash

Commands found in the hash table are checked for existence before being executed and non-existence forces a PATH search.

checkwinsize

Checks the window size after each command and, if it has changed, updates the variables LINES and COLUMNS accordingly.

cmdhist

Attempt to save all lines of a multiline command in a single history entry.

dotglob

Filenames beginning with a . are included in pathname expansion.

execfail

A non-interactive shell will not exit if it cannot execute the argument to an exec. Interactive shells do not exit if exec fails.

expand_aliases

Aliases are expanded.

extdebug

Behavior intended for use by debuggers is enabled. This includes: the -F option of declare displays the source filename and line number corresponding to each function name supplied as an argument; if the command run by the DEBUG trap returns a non-zero value, the next command is skipped and not executed; and if the command run by the DEBUG trap returns a value of 2, and the shell is executing in a subroutine, a call to return is simulated.

extglob

Extended pattern matching features are enabled.

failglob

Patterns which fail to match filenames during pathname expansion result in an expansion error.

force_fignore

The suffixes specified by the FIGNORE shell variable cause words to be ignored when performing word completion even if the ignored words are the only possible completions.

gnu_errfmt

Shell error messages are written in the standard GNU error message format.

histappend

The history list is appended to the file named by the value of the variable HISTFILE when the shell exits, rather than overwriting the file.

histreedit

If readline is being used, the opportunity is given for re-editing a failed history substitution.

histverify

If readline is being used, the results of history substitution are not immediately passed to the shell parser. Instead, the resulting line is loaded into the readline editing buffer, allowing further modification.

hostcomplete

If readline is being used, an attempt will be made to perform hostname completion when a word beginning with @ is being completed.

huponexit

bash will send SIGHUP to all jobs when an interactive login shell exits.

interactive_comments

Allows a word beginning with # and all subsequent characters on the line to be ignored in an interactive shell.

lithist

If the cmdhist option is enabled, multiline commands are saved to the history with embedded newlines rather than using semicolon separators where possible.

login_shell

If bash is started as a login shell. This is a read-only value.

mailwarn

If the file being checked for mail has been accessed since the last time it was checked, the message "The mail in mailfile has been read" is displayed.

no_empty_cmd_completion

If readline is being used, no attempt will be made to search the PATH for possible completions when completion is attempted on an empty line.

nocaseglob

bash matches filenames in a case-insensitive fashion when performing pathname expansion.

nullglob

Allows patterns which match no files to expand to null strings rather than to themselves.

progcomp

Programmable completion facilities are enabled. Default is on.

promptvars

Prompt strings undergo variable and parameter expansion after being expanded.

restricted_shell

Set if the shell is started in restricted mode. The value cannot be changed.

shift_verbose

The shift built-in prints an error if it has shifted past the last positional parameter.

sourcepath

The source built-in uses the value of PATH to find the directory containing the file supplied as an argument.

xpg_echo

echo expands backslash-escape sequences by default.

I/O Redirection

Table B-9 shows a complete list of I/O redirectors. (This table is also included earlier as Table 7-1.) Note that there are two formats for specifying standard output and error redirection: &>file and >&file. The second of these, and the one used throughout this book, is the preferred way.

Table B-9. I/O redirectors

Redirector

Function

cmd1 | cmd2

Pipe; take standard output of cmd1 as standard input to cmd2

> file

Direct standard output to file

< file

Take standard input from file

>> file

Direct standard output to file; append to file if it already exists

>| file

Force standard output to file even if noclobber is set

n>| file

Force output to file from file descriptor n even if noclobber set

<> file

Use file as both standard input and standard output

n<> file

Use file as both input and output for file descriptor n

<< label

Here-document

n > file

Direct file descriptor n to file

n < file

Take file descriptor n from file

>> file

Direct file descriptor n to file; append to file if it already exists

n>&

Duplicate standard output to file descriptor n

n<&

Duplicate standard input from file descriptor n

n>&m

File descriptor n is made to be a copy of the output file descriptor

n<&m

File descriptor n is made to be a copy of the input file descriptor

&> file

Directs standard output and standard error to file

<&-

Close the standard input

>&-

Close the standard output

n>&-

Close the output from file descriptor n

n<&-

Close the input from file descriptor n

n>&word

If n is not specified, the standard output (file descriptor 1) is used; if the digits in word do not specify a file descriptor open for output, a redirection error occurs; as a special case, if n is omitted, and word does not expand to one or more digits, the standard output and standard error are redirected as described previously

n<&word

If word expands to one or more digits, the file descriptor denoted by n is made to be a copy of that file descriptor; if the digits in word do not specify a file descriptor open for input, a redirection error occurs; if word evaluates to -, file descriptor n is closed; if n is not specified, the standard input (file descriptor 0) is used

n>&digit-

Moves the file descriptor digit to file descriptor n, or the standard output (file descriptor 1) if n is not specified

n<&digit-

Moves the file descriptor digit to file descriptor n, or the standard input (file descriptor 0) if n is not specified; digit is closed after being duplicated to n

emacs Mode Commands

Table B-10 shows a complete list of emacs editing mode commands.

Table B-10. emacs mode commands

Command

Meaning

CTRL-A

Move to beginning of line

CTRL-B

Move backward one character

CTRL-D

Delete one character forward

CTRL-E

Move to end of line

CTRL-F

Move forward one character

CTRL-G

Abort the current editing command and ring the terminal bell

CTRL-J

Same as RETURN

CTRL-K

Delete (kill) forward to end of line

CTRL-L

Clear screen and redisplay the line

CTRL-M

Same as RETURN

CTRL-N

Next line in command history

CTRL-O

Same as RETURN, then display next line in history file

CTRL-P

Previous line in command history

CTRL-R

Search backward

CTRL-S

Search forward

CTRL-T

Transpose two characters

CTRL-U

Kill backward from point to the beginning of line

CTRL-V

Make the next character typed verbatim

CTRL-V TAB

Insert a TAB

CTRL-W

Kill the word behind the cursor, using whitespace as the boundary

CTRL-X /

List the possible filename completions of the current word

CTRL-X ~

List the possible username completions of the current word

CTRL-X $

List the possible shell variable completions of the current word

CTRL-X @

List the possible hostname completions of the current word

CTRL-X !

List the possible command name completions of the current word

CTRL-X (

Begin saving characters into the current keyboard macro

CTRL-X )

Stop saving characters into the current keyboard macro

CTRL-X e

Re-execute the last keyboard macro defined

CTRL-X CTRL-R

Read in the contents of the readline initialization file

CTRL-X CTRL-V

Display version information on this instance of bash

CTRL-Y

Retrieve (yank) last item killed

DEL

Delete one character backward

CTRL-[

Same as ESC (most keyboards)

ESC-B

Move one word backward

ESC-C

Change word after point to all capital letters

ESC-D

Delete one word forward

ESC-F

Move one word forward

ESC-L

Change word after point to all lowercase letters

ESC-N

Non-incremental forward search

ESC-P

Non-incremental reverse search

ESC-R

Undo all the changes made to this line

ESC-T

Transpose two words

ESC-U

Change word after point to all uppercase letters

ESC-CTRL-E

Perform shell alias, history, and word expansion on the line

ESC-CTRL-H

Delete one word backward

ESC-CTRL-Y

Insert the first argument to the previous command (usually the second word) at point

ESC-DEL

Delete one word backward

ESC-^

Perform history expansion on the line

ESC-<

Move to first line of history file

ESC->

Move to last line of history file

ESC-.

Insert last word in previous command line after point

ESC-_

Same as above

TAB

Attempt filename completion on current word

ESC-?

List the possible completions of the text before point

ESC-/

Attempt filename completion on current word

ESC-~

Attempt username completion on current word

ESC-$

Attempt variable completion on current word

ESC-@

Attempt hostname completion on current word

ESC-!

Attempt command name completion on current word

ESC-TAB

Attempt completion from text in the command history

ESC-~

Attempt tilde expansion on the current word

ESC-\

Delete all the spaces and TABs around point

ESC-*

Insert all of the completions that would be generated by ESC-= before point

ESC-=

List the possible completions before point

ESC-{

Attempt filename completion and return the list to the shell enclosed within braces

vi Control Mode Commands

Table B-11 shows a complete list of all vi control mode commands.

Table B-11. vi control mode commands

Command

Meaning

h

Move left one character

l

Move right one character

w

Move right one word

b

Move left one word

W

Move to beginning of next non-blank word

B

Move to beginning of preceding non-blank word

e

Move to end of current word

E

Move to end of current non-blank word

0

Move to beginning of line

.

Repeat the last a insertion.

^

Move to first non-blank character in line

$

Move to end of line

i

Insert text before current character

a

Insert text after current character

I

Insert text at beginning of line

A

Insert text at end of line

R

Overwrite existing text

dh

Delete one character backward

dl

Delete one character forward

db

Delete one word backward

dw

Delete one word forward

dB

Delete one non-blank word backward

dW

Delete one non-blank word forward

d$

Delete to end of line

d0

Delete to beginning of line

D

Equivalent to d$ (delete to end of line)

dd

Equivalent to 0d$ (delete entire line)

C

Equivalent to c$ (delete to end of line, enter input mode)

cc

Equivalent to 0c$ (delete entire line, enter input mode)

x

Equivalent to dl (delete character forwards)

X

Equivalent to dh (delete character backwards)

k or -

Move backward one line

j or +

Move forward one line

G

Move to line given by repeat count

/ string

Search forward for string

? string

Search backward for string

n

Repeat search forward

N

Repeat search backward

f x

Move right to next occurrence of x

F x

Move left to previous occurrence of x

t x

Move right to next occurrence of x, then back one space

T x

Move left to previous occurrence of x, then forward one space

;

Redo last character finding command

,

Redo last character finding command in opposite direction

\

Do filename completion

*

Do wildcard expansion (onto command line)

\=

Do wildcard expansion (as printed list)

~

Invert (twiddle) case of current character(s)

\_

Append last word of previous command, enter input mode

CTRL-L

Start a new line and redraw the current line on it

#

Prepend # (comment character) to the line and send it to history

Appendix C. Loadable Built-Ins

bash 2.0 introduced a new feature that increased the flexibility of the shell: dynamically loadable built-ins. On systems that support dynamic loading, you can write your own built-ins in C, compile them into shared objects, and load them at any time from within the shell with the enable built-in (see Chapter 7 for details on all of the enable options).

This appendix will discuss briefly how to go about writing a built-in and loading it in bash. The discussion assumes that you have experience with writing, compiling, and linking C programs.

The bash archive contains a number of pre-written built-ins in the directory examples/loadables/. You can build them by uncommenting the lines in the file Makefile that are relevant to your system, and typing make. We'll take one of these built-ins, tty, and use it as a "case study" for built-ins in general.

tty will mimic the standard UNIX command tty. It will print the name of the terminal that is connected to standard input. The built-in will, like the command, return true if the device is a TTY and false if it isn't. In addition, it will take an option, -s, which specifies that it should work silently, i.e., print nothing and just return a result.

The C code for a built-in can be divided into three distinct sections: the code that implements the functionality of the built-in, a help text message definition, and a structure describing the built-in so that bash can access it.

The description structure is quite straightforward and takes the form:

struct builtin structname = {
    "builtin_name",
    function_name,
    BUILTIN_ENABLED,
    help_array,
    "usage",
    0
};

builtin_name is the name of the built-in as it appears in bash. The next field, function-name, is the name of the C function that implements the built-in. We'll look at this in a moment. BUILTIN_ENABLED is the initial state of the built-in, whether it is enabled or not. This field should always be set to BUILTIN_ENABLED. help_array is an array of strings which are printed when help is used on the built-in. usage is the shorter form of help; the command and its options. The last field in the structure should be set to 0.

In our example we'll call the built-in tty, the C function tty_builtin, and the help array tty_doc. The usage string will be tty [-s]. The resulting structure looks like this:

struct builtin tty_struct = {
    "tty",
    tty_builtin,
    BUILTIN_ENABLED,
    tty_doc,
    "tty [-s]",
    0
};

The next section is the code that does the work. It looks like this:

tty_builtin (list)
    WORD_LIST *list;
{
    int opt, sflag;
    char *t;

    reset_internal_getopt ( );
    sflag = 0;
    while ((opt = internal_getopt (list, "s")) != -1)
    {
      switch (opt)
      {
          case 's':
              sflag = 1;
              break;
          default:
              builtin_usage ( );
              return (EX_USAGE);
      }
    }
    list = loptend;

    t = ttyname (0);
    if (sflag == 0)
        puts (t ? t : "not a tty");
    return (t ? EXECUTION_SUCCESS : EXECUTION_FAILURE);
}

Built-in functions are always given a pointer to a list of type WORD_LIST. If the built-in doesn't actually take any options, you must call no_options(list) and check its return value before any further processing. If the return value is non-zero, your function should immediately return with the value EX_USAGE.

You must always use internal_getopt rather than the standard C library getopt to process the built-in options. Also, you must reset the option processing first by calling reset_internal_getopt.

Option processing is performed in the standard way, except if the options are incorrect, in which case you should return EX_USAGE. Any arguments left after option processing are pointed to by loptend. Once the function is finished, it should return the value EXECUTION_SUCCESS or EXECUTION_FAILURE.

In the case of our tty built-in, we then just call the standard C library routine ttyname, and if the -s option wasn't given, print out the name of the tty (or "not a tty" if the device wasn't). The function then returns success or failure, depending upon the result from the call to ttyname.

The last major section is the help definition. This is simply an array of strings, the last element of the array being NULL. Each string is printed to standard output when help is run on the built-in. You should, therefore, keep the strings to 76 characters or less (an 80-character standard display minus a 4-character margin). In the case of tty, our help text looks like this:

char *tty_doc[] = {
  "tty writes the name of the terminal that is opened for standard",
  "input to standard output.  If the `-s' option is supplied, nothing",
  "is written; the exit status determines whether or not the standard",
  "input is connected to a tty.",
  (char *)NULL
};

The last things to add to our code are the necessary C header files. These are stdio.h and the bash header files config.h, builtins.h, shell.h, and bashgetopt.h.

Here is the C program in its entirety:

#include "config.h"
#include <stdio.h>
#include "builtins.h"
#include "shell.h"
#include "bashgetopt.h"

extern char *ttyname ( );

tty_builtin (list)
    WORD_LIST *list;
{
    int opt, sflag;
    char *t;

    reset_internal_getopt ( );
    sflag = 0;
    while ((opt = internal_getopt (list, "s")) != -1)
    {
        switch (opt)
        {
            case 's':
                sflag = 1;
                break;
            default:
                builtin_usage ( );
                return (EX_USAGE);
        }
    }
    list = loptend;

    t = ttyname (0);
    if (sflag == 0)
        puts (t ? t : "not a tty");
    return (t ? EXECUTION_SUCCESS : EXECUTION_FAILURE);
}

char *tty_doc[] = {
    "tty writes the name of the terminal that is opened for standard",
    "input to standard output.  If the `-s' option is supplied, nothing",
    "is written; the exit status determines whether or not the standard",
    "input is connected to a tty.",
    (char *)NULL
};

struct builtin tty_struct = {
    "tty",
    tty_builtin,
    BUILTIN_ENABLED,
    tty_doc,
    "tty [-s]",
    0
};

We now need to compile and link this as a dynamic shared object. Unfortunately, different systems have different ways to specify how to compile dynamic shared objects. Table C-1 lists some common systems and the commands needed to compile and link tty.c. Replace archive with the path of the top level of the bash archive.

Table C-1. Shared object compilation

System

Commands

SunOS 4

cc -pic -Iarchive -Iarchive/builtins -Iarchive/lib -c tty.c

ld -assert pure-text -o tty tty.o

SunOS 5

cc -K pic -Iarchive -Iarchive/builtins -Iarchive/lib -c tty.c

cc -dy -z text -G -i -h tty -o tty tty.o

SVR4, SVR4.2, Irix

cc -K PIC -Iarchive -Iarchive/builtins -Iarchive/lib -c tty.c

ld -dy -z text -G -h tty -o tty tty.o

AIX

cc -K -Iarchive -Iarchive/builtins -Iarchive/lib -c tty.c

ld -bdynamic -bnoentry -bexpall -G -o tty tty.o

Linux

cc -fPIC -Iarchive -Iarchive/builtins -Iarchive/lib -c tty.c

ld -shared -o tty tty.o

NetBSD, FreeBSD

cc -fpic -Iarchive -Iarchive/builtins -Iarchive/lib -c tty.c

ld -x -Bshareable -o tty tty.o

After you have compiled and linked the program, you should have a shared object called tty. To load this into bash, just type enable -f path/ tty tty, where path is the full pathname of the shared object. You can remove a loaded built-in at any time with the -d option, e.g., enable -d tty.

You can put as many built-ins as you like into one shared object; all you need are the three main sections that we saw above for each built-in in the same C file. It is best, however, to keep the number of built-ins per shared object small. You will also probably find it best to keep similar built-ins, or built-ins that work together (e.g., pushd, popd, dirs), in the same shared object.

bash loads a shared object as a whole, so if you ask it to load one built-in from a shared object that has twenty built-ins, it will load all 20 (but only one will be enabled). For this reason, keep the number of built-ins small to save loading memory with unnecessary things, and group similar built-ins so that if the user enables one of them, all of them will be loaded and ready in memory for enabling.

Appendix D. Programmable Completion

Programmable completion is a feature that was introduced in bash 2.0.[1] It extends the built-in textual completion that is discussed in Chapter 2 by providing hooks into the completion mechanism. This means that it is possible to write virtually any form of completion desired. For instance, if you were typing the man command, wouldn't it be nice to be able to hit TAB and have the manual sections listed for you. Programmable completion allows you to do this and much more.

This Appendix will only look at the basics of programmable completion. While completion is a feature you are very likely to use in everyday shell operation, you are unlikely to need to delve into the inner depths and actually write your own completion code. Fortunately the feature has been around for some time and there are already several libraries of completion commands developed by other people. We'll just outline the basic commands and procedures needed to use the completion mechanism should you ever need to work on it yourself.

In order to be able to do textual completion in a particular way you first have to tell the shell how to do it when you press the TAB key. This is done via the complete command.

The main argument of complete is a name that can be the name of a command or anything else that you want textual completion to work with. As an example we will look at the gunzip command that allows compressed archives of various types to be uncompressed. Normally, if you were to type:[2]

         $ gunzip [TAB][TAB]

you would get a list of filenames from which to complete. This list will include all kinds of things that are unsuitable for the gunzip command. What we really would like is the subset of those files that are suitable for the command to work on. We can set this up by using complete:[3]

complete -A file -X '!*.@(Z|gz|tgz)' gunzip

Here we are telling completion mechanism that when the gunzip command is typed in we want it to do something special. The -A flag is an action and takes a variety of arguments. In this case we provide file as the argument, which asks the mechanism to provide a list of files as possible completions. The next step is to cut this down by selecting only the files that we know will work with gunzip. We've done this with the -X option, which takes as its argument a filter pattern. When applied to the completion list the filter removes anything matching the pattern, i.e., the result is everything that doesn't match the pattern. gunzip can uncompress a number of file types including those with the extensions .Z, .gz, and .tgz. We want to match all filenames with extensions that have one of these three patterns. We then have to negate this with a ! (remember, the filter removes the patterns that match).

We can actually try this out first and see what completions would be returned without having to install the completion with complete. We can do this via the compgen command:

compgen -A file -X '!*.@(Z|gz|tgz)'

This produces a list of completion strings (assuming you have some files in the current directory with these extensions). compgen is useful for trying out filters to see what completion strings are produced. It is also needed when more complex completion is required. We'll see an example of this later in the Appendix.

Once we install the complete command above, either by sourcing a script with it in or executing it on the command line, we can use the augmented completion mechanism with the gunzip command:

$gunzip [TAB][TAB]
archive.tgz  archive1.tgz  file.Z
$gunzip

You can probably see that there are other things we could do. What about providing a list of possible arguments for specific options to a command? For instance, the kill command can takes a process ID but can optionally take a signal name preceded by a dash (-) or a signal name following the option -n. We should be able to complete with PIDs but, if there is a dash or a -n, with signal names.

This is slightly more complex than the one-line example above. Here we will need some code to distinguish what has already been typed in. We'll also need to get the PIDs and the signal names. We'll put the code in a function and call the function via the completion mechanism. Here's the code to call our function, which we'll name _kill:

complete -F _kill kill

The -F option to complete tells it to call the function named _kill when it is performing textual completion for the kill command. The next step is to code the function:

_kill( )
{
    local cur
        local sign

    COMPREPLY=( )
    cur=${COMP_WORDS[COMP_CWORD]}

    if (($COMP_CWORD == 2)) && [[ ${COMP_WORDS[1]} == -n ]]; then
       # return list of available signals
           _signals
    elif (($COMP_CWORD == 1 )) && [[ "$cur" == -* ]]; then
       # return list of available signals
       sign="-"
       _signals
        else
       # return list of available PIDs
       COMPREPLY=( $( compgen -W '$( command ps axo pid | sed 1d )' $cur ) )
    fi
}

The code is fairly standard apart from the use of some special environment variables and a call to a function called _signals, which we'll come to shortly.

The variable COMPREPLY is used to hold the result that is returned back to the completion mechanism. It is an array that holds a set of completion strings. Initially this is set to an empty array.

The local variable cur is a convenience variable to make the code more readable because the value is used in several places. Its value is derived from an element in the array COMP_WORDS. This array holds the individual words on the current command line. COMP_CWORD is an index into the array; it gives the word containing the current cursor position. The value of cur is the word currently containing the cursor.

The first if statement tests for the condition where the kill command is followed by the -n option. If the first word was -n and we are on the second word, then we need to provide a list of signal names for the completion mechanism.

The second if statement is similar, except this time we are looking to complete on the current word, which starts with a dash and is followed by anything else. The body of this if again calls _signals but this time it sets the sign variable to a dash. The reason for this will become obvious when we look at the _signals function.

The remaining part in the else block returns a list of process IDs. This uses the compgen command to help in creating the array of completion strings. First it runs the ps command to obtain a list of PIDs and then pipes the result through sed to remove the first line (which is the heading "PID").[4] This is then given as an argument to the -W option of compgen, which takes a word list. compgen then returns all completion strings that match the value of the variable cur and the resulting array is assigned to COMPREPLY.

compgen is important here because we can't just return the complete list of PIDs provided by ps. The user may have already typed part of a PID and then attempted completion. As the partial PID will be in the variable cur, compgen restricts the results to those that match or partially match that value. For example if cur had the value 5 then compgen would return only values beginning with a "5", such as 5, 59 or 562.

The last piece of the puzzle is the _signals function:

_signals( )
{
        local i

        COMPREPLY=( $( compgen -A signal SIG${cur#-} ))

        for (( i=0; i < ${#COMPREPLY[@]}; i++ )); do
                COMPREPLY[i]=$sign${COMPREPLY[i]#SIG}
        done
}

While we can get a list of signal names by using complete -A signal, the names are unfortunately not in a form that is very usable and so we can't use this to directly generate the array of names. The names generated begin with the letters "SIG" while the names needed by the kill command don't. The _signal function should assign to COMPREPLY an array of signal names, optionally preceded by a dash.

First we generate the list of signal names with compgen. Each name starts with the letters "SIG". In order to get complete to provide the correct subset if the user has begun to type a name, we add "SIG" to the beginning of the value in cur. We also take the opportunity to remove any preceding dash that the value has so it will match.

We then loop on the array removing the letters "SIG" and adding a dash if needed (the value of the variable sign) to each entry.

Both complete and compgen have many other options and actions; far more than we can cover in a few simple exercises. If you are interested in taking programmable completion further, we recommend looking in the bash manual and downloading some of the many examples that are available on the Internet or in the bash archive under bash-3.0\examples\complete.

As you can see, textual completion can get quite involved and creating the necessary code can be time-consuming. Fortunately there are already completion libraries available for bash. One of these is the bash Completion Project, which can be found at http://freshmeat.net/projects/bashcompletion/ .

[1] Technically it was added in bash Version 2.04.

[2] For the rest of this Appendix we will denote typing a TAB character as [TAB].

[3] In order for @(...) to work you will need extended pattern matching switched on (shopt -s extglob).

[4] On AIX and Solaris you will have to use the command ps -efo pid.

Index

A note on the digital index

A link in an index entry is displayed as the section title in which that entry appears. Because some sections have multiple index markers, it is not unusual for an entry to have several links to the same section. Clicking on any link will take you directly to the place in the text in which the marker appears.

Symbols

! (exclamation point), Filenames, Wildcards, and Pathname Expansion, History Expansion, Extended Pattern Matching, Combinations of Exit Statuses, String comparisons, File attribute checking, Integer Variables and Arithmetic, Integer Variables and Arithmetic, Process ID Variables and Temporary Files, Commands, Built-In Shell Variables

!= (not equal to operator), Integer Variables and Arithmetic

!= (string comparison operator), String comparisons

conditional not operator, Combinations of Exit Statuses

debugger command, Commands

environment variable, Built-In Shell Variables

event designators, History Expansion

extended pattern-matching operator, Extended Pattern Matching

logical not operator, Integer Variables and Arithmetic

negation operator, File attribute checking

negation wildcard, Filenames, Wildcards, and Pathname Expansion

process ID shell variable, Process ID Variables and Temporary Files

" (double quotes), Quoting, Quoting Quotation Marks, Variables and Quoting, Integer Variables and Arithmetic, Quoting

arithmetic expressions in, Integer Variables and Arithmetic

around shell variables, Variables and Quoting

around special characters, Quoting

backslash preceding, Quoting Quotation Marks

command line processing of, Quoting

# (hash mark), Miscellaneous Commands, Positional Parameters, Syntax of String Operators, Patterns and Pattern Matching, Patterns and Pattern Matching, Length Operator, Advanced Examples: pushd and popd, Arrays, printf, Built-In Shell Variables

## (pattern-matching operator), Patterns and Pattern Matching

array element length operator, Arrays

comments, Syntax of String Operators

environment variable, Positional Parameters, Built-In Shell Variables

length operator, Length Operator

pattern-matching operator, Patterns and Pattern Matching, Advanced Examples: pushd and popd

prepend comment, vi, Miscellaneous Commands

printf flag, printf

$ (dollar sign), Textual Completion, Simple Control Mode Commands, Simple Control Mode Commands, History Expansion, Shell Variables, Integer Variables and Arithmetic, Arithmetic Conditionals, Command-Line Processing, Process ID Variables and Temporary Files, Built-In Shell Variables

$$ (shell variable), Process ID Variables and Temporary Files

$((...)) (arithmetic expressions), Integer Variables and Arithmetic

$((...)) (arithmetic test), Arithmetic Conditionals

environment variable, Built-In Shell Variables

variable substitution, Textual Completion, Shell Variables, Command-Line Processing

vi command, Simple Control Mode Commands, Simple Control Mode Commands

word designator, History Expansion

$0 positional parameter, Positional Parameters

$1 positional parameter, Positional Parameters

$2 positional parameter, Positional Parameters

$3 positional parameter, Positional Parameters

$else directive, readline, The readline Startup File

$endif directive, readline, The readline Startup File

$if directive, readline, The readline Startup File

% (percent sign), History Expansion, Patterns and Pattern Matching, Patterns and Pattern Matching, Advanced Examples: pushd and popd, Integer Variables and Arithmetic, printf, Additional bash printf specifiers, Foreground and Background, Foreground and Background, Foreground and Background, Foreground and Background, Foreground and Background

%% (job most recently put in background), Foreground and Background

%% (pattern-matching operator), Patterns and Pattern Matching, Advanced Examples: pushd and popd

%+ (job most recently put in background), Foreground and Background

%- (job second-most recently put in background), Foreground and Background

%? (job containing string), Foreground and Background

job numbers, Foreground and Background

modulus operator, Integer Variables and Arithmetic

pattern-matching operator, Patterns and Pattern Matching

printf format specifiers, printf, Additional bash printf specifiers

word designator, History Expansion

& (ampersand), Background Jobs, Combinations of Exit Statuses, File attribute checking, Integer Variables and Arithmetic, Integer Variables and Arithmetic, I/O Redirectors, Job Control

&& (logical and operator), Combinations of Exit Statuses, File attribute checking, Integer Variables and Arithmetic

&\\> (output and error redirection), I/O Redirectors

bitwise and operator, Integer Variables and Arithmetic

running commands in background, Background Jobs, Job Control

' (single quotes), Quoting, Continuing Lines, Aliases, Integer Variables and Arithmetic, Quoting

around special characters, Quoting

command line processing of, Quoting

enclosing RETURN, Continuing Lines

in alias definition, Aliases

when to use, Integer Variables and Arithmetic

( ) (parentheses), Command Substitution, File attribute checking, Integer Variables and Arithmetic, Arithmetic Conditionals, Nested Subshells, Potential Problems, Configuring and Building bash

((...)) (arithmetic test), Arithmetic Conditionals, Potential Problems, Configuring and Building bash

command substitution, Command Substitution

grouping conditional operators, File attribute checking

in arithmetic expressions, Integer Variables and Arithmetic

nested subshells, Nested Subshells

* (asterisk), Filenames, Wildcards, and Pathname Expansion, Textual Completion, History Expansion, Positional Parameters, Quoting with $@ and $*, Patterns and Pattern Matching, Extended Pattern Matching, Integer Variables and Arithmetic, Integer Variables and Arithmetic, Arrays, Built-In Shell Variables

** (exponentiation operator), Integer Variables and Arithmetic

environment variable, Positional Parameters, Quoting with $@ and $*, Built-In Shell Variables

extended pattern-matching operator, Extended Pattern Matching

multiplication operator, Integer Variables and Arithmetic

pattern-matching operator, Patterns and Pattern Matching

special array index, Arrays

textual completion, vi, Textual Completion

wildcard, Filenames, Wildcards, and Pathname Expansion

word designator, History Expansion

+ (plus sign), Moving Around in the History List, Moving Around in the History List, Extended Pattern Matching, Integer Variables and Arithmetic, Integer Variables and Arithmetic, printf, Set Options

++ (increment operator), Integer Variables and Arithmetic

addition operator, Integer Variables and Arithmetic

extended pattern-matching operator, Extended Pattern Matching

printf flag, printf

vi command, Moving Around in the History List, Moving Around in the History List

xtrace output, Set Options

, (comma), Character-Finding Commands, Integer Variables and Arithmetic

sequential evaluation operator, Integer Variables and Arithmetic

vi command, Character-Finding Commands

- (hyphen), Commands, Arguments, and Options, Moving Around in the History List, Moving Around in the History List, Miscellaneous Commands, Integer Variables and Arithmetic, Integer Variables and Arithmetic, printf, Built-In Shell Variables

-- (decrement operator), Integer Variables and Arithmetic

append word, vi, Miscellaneous Commands

environment variable, Built-In Shell Variables

preceding options, Commands, Arguments, and Options

printf flag, printf

subtraction operator, Integer Variables and Arithmetic

vi command, Moving Around in the History List, Moving Around in the History List

-a (file attribute operator), File attribute checking

-a (logical operator), File attribute checking

-d (file attribute operator), File attribute checking

-e (file attribute operator), File attribute checking

-eq (equal to test operator), Arithmetic Conditionals

-eq (integer comparison operator), Integer Conditionals

-f (file attribute operator), File attribute checking

-G (file attribute operator), File attribute checking

-ge (greater than or equal to test operator), Arithmetic Conditionals

-ge (integer comparison operator), Integer Conditionals

-gt (greater than test operator), Arithmetic Conditionals

-gt (integer comparison operator), Integer Conditionals

-le (integer comparison operator), Integer Conditionals

-le (less than or equal to test operator), Arithmetic Conditionals

-lt (integer comparison operator), Integer Conditionals

-lt (less than test operator), Arithmetic Conditionals

-N (file attribute operator), File attribute checking

-n (string comparison operator), String comparisons

-ne (integer comparison operator), Integer Conditionals

-ne (not equal to test operator), Arithmetic Conditionals

-nt (file attribute operator), File attribute checking

-O (file attribute operator), File attribute checking

-o (logical operator), File attribute checking

-ot (file attribute operator), File attribute checking

-r (file attribute operator), File attribute checking

-s (file attribute operator), File attribute checking

-w (file attribute operator), File attribute checking

-x (file attribute operator), File attribute checking

-z (string comparison operator), String comparisons

. (dot), Changing working directories, Changing working directories, Filenames, Wildcards, and Pathname Expansion, Deletion Commands, The .bash_profile, .bash_logout, and .bashrc Files, shopt, Built-In Commands and Reserved Words

.. (parent directory), Changing working directories

command, Built-In Commands and Reserved Words

current directory, Changing working directories

preceding filenames, Filenames, Wildcards, and Pathname Expansion, shopt

synonym to source command, The .bash_profile, .bash_logout, and .bashrc Files

vi command, Deletion Commands

.bashrc file, Command-Line Options, Restricted Shell

ignoring, Command-Line Options

restricted, Restricted Shell

.bash_profile file, Environment Variables, The Environment File, Restricted Shell, Restricted Shell

environment file and, The Environment File

environment variables in, Environment Variables

restricted, Restricted Shell, Restricted Shell

.inputrc file, Enabling Command-Line Editing

.profile file, The .bash_profile, .bash_logout, and .bashrc Files

/ (slash), Moving Around in the History List, Patterns and Pattern Matching, Patterns and Pattern Matching, Integer Variables and Arithmetic, Restricted Shell

// (pattern-matching and replacement operator), Patterns and Pattern Matching

division operator, Integer Variables and Arithmetic

in restricted shell, Restricted Shell

pattern-matching and replacement operator, Patterns and Pattern Matching

vi command, Moving Around in the History List

0 (zero) environment variable, Built-In Shell Variables

0 (zero) printf flag, printf

0 (zero) word designator, History Expansion

: (colon), Syntax of String Operators, Syntax of String Operators, Syntax of String Operators, Syntax of String Operators, Syntax of String Operators, Syntax of String Operators, Syntax of String Operators, Advanced Examples: pushd and popd, Built-In Commands and Reserved Words

:+ (string operator), Syntax of String Operators, Syntax of String Operators

:- (string operator), Syntax of String Operators

:= (string operator), Syntax of String Operators, Syntax of String Operators

:? (string operator), Syntax of String Operators, Advanced Examples: pushd and popd

command, Built-In Commands and Reserved Words

string operator, Syntax of String Operators

; (semicolon), Character-Finding Commands, String comparisons

statement separator, String comparisons

vi command, Character-Finding Commands

< (less than sign), I/O Redirection, String comparisons, Integer Variables and Arithmetic, Integer Variables and Arithmetic, Integer Variables and Arithmetic, I/O Redirectors, I/O Redirectors, I/O Redirectors, I/O Redirectors, I/O Redirectors, Here-documents, Here-documents

<& (input redirection), I/O Redirectors

<&- (input redirection), I/O Redirectors

<< (bit-shift left operator), Integer Variables and Arithmetic

<< (here-document), I/O Redirectors, Here-documents, Here-documents

<= (less than or equal to operator), Integer Variables and Arithmetic

<\\> (input/output redirection), I/O Redirectors

input redirection, I/O Redirectors

less than operator, Integer Variables and Arithmetic

redirecting input, I/O Redirection

string comparison operator, String comparisons

= (equal sign), Textual Completion, String comparisons, Integer Variables and Arithmetic

== (equal to operator), Integer Variables and Arithmetic

string comparison operator, String comparisons

textual completion, vi, Textual Completion

> (greater than sign), I/O Redirection

output redirection, I/O Redirection

? (question mark), Filenames, Wildcards, and Pathname Expansion, Moving Around in the History List, Extended Pattern Matching, Exit Status, Commands, Built-In Shell Variables

debugger command, Commands

environment variable, Exit Status, Built-In Shell Variables

extended pattern-matching operator, Extended Pattern Matching

vi command, Moving Around in the History List

wildcard, Filenames, Wildcards, and Pathname Expansion

@ (at sign), Textual Completion, Positional Parameters, Quoting with $@ and $*, Extended Pattern Matching, Arrays, Built-In Shell Variables

environment variable, Positional Parameters, Quoting with $@ and $*, Built-In Shell Variables

extended pattern-matching operator, Extended Pattern Matching

hostname completion, Textual Completion

special array index, Arrays

[] (brackets), Filenames, Wildcards, and Pathname Expansion, Condition Tests, Condition Tests, Potential Problems, Configuring and Building bash, Test Operators, Test Operators, Test Operators, Test Operators

wildcard, Filenames, Wildcards, and Pathname Expansion

[...] (condition test), Condition Tests, Potential Problems, Test Operators, Test Operators

[[...]] (condition test), Condition Tests, Configuring and Building bash, Test Operators, Test Operators

\\> (greater than sign), String comparisons, Integer Variables and Arithmetic, Integer Variables and Arithmetic, Integer Variables and Arithmetic, I/O Redirectors, I/O Redirectors, I/O Redirectors, I/O Redirectors, I/O Redirectors, I/O Redirectors, File Descriptors

greater than operator, Integer Variables and Arithmetic

output redirection, I/O Redirectors

string comparison operator, String comparisons

\\>& (output redirection), I/O Redirectors, File Descriptors

\\>&- (output redirection), I/O Redirectors

\\>= (greater than or equal to operator), Integer Variables and Arithmetic

\\>\\> (bit-shift right operator), Integer Variables and Arithmetic

\\>\\> (output redirection), I/O Redirectors

\\>| (output redirection), I/O Redirectors, I/O Redirectors

\\\\ (backslash), Backslash-Escaping, Continuing Lines, Textual Completion, echo escape sequences, Reading user input, Configuring and Building bash

backslash-escaping, Backslash-Escaping

continuation character, Continuing Lines, Reading user input

escape character, echo, echo escape sequences

escape character, prompt strings, Configuring and Building bash

textual completion, vi, Textual Completion

^ (caret), Simple Control Mode Commands, History Expansion, History Expansion, Integer Variables and Arithmetic, Control-Key Signals, Installing bash as the Standard Shell, The Bourne Shell

bitwise exclusive or operator, Integer Variables and Arithmetic

event designator, History Expansion

pipe character, Installing bash as the Standard Shell, The Bourne Shell

representing CTRL key, Control-Key Signals

vi command, Simple Control Mode Commands

word designator, History Expansion

{} (braces), Brace Expansion, More on Variable Syntax, Command blocks

brace expansion wildcards, Brace Expansion

command blocks in, Command blocks

in shell variable syntax, More on Variable Syntax

| (vertical bar), Pipelines, Character-Finding Commands, Extended Pattern Matching, Combinations of Exit Statuses, File attribute checking, case, Integer Variables and Arithmetic, Integer Variables and Arithmetic, I/O Redirectors, Command-Line Processing

bitwise or operator, Integer Variables and Arithmetic

extended pattern matching, Extended Pattern Matching

in case statement, case

pipe, Pipelines, I/O Redirectors, Command-Line Processing

vi command, Character-Finding Commands

|| (logical or operator), Combinations of Exit Statuses, File attribute checking, Integer Variables and Arithmetic

~ (tilde), Tilde notation, Textual Completion, Miscellaneous Commands, Integer Variables and Arithmetic, Command-Line Processing, The Bourne Shell

bitwise not operator, Integer Variables and Arithmetic

home directory, Command-Line Processing

in pathnames, Tilde notation, The Bourne Shell

invert case, vi, Miscellaneous Commands

username completion, Textual Completion

A

a command, vi, Entering and Changing Text

A command, vi, Entering and Changing Text

absolute pathname, Directories (see full pathname)

album example, Syntax of String Operators, Command Substitution

alias command, Aliases, Built-In Commands and Reserved Words

aliases, Aliases, Aliases, Aliases, Functions, Command-Line Processing, Command-Line Processing, Types of Global Customization, Configuring and Building bash, Examples, The Bourne Shell

Bourne shell not supporting, The Bourne Shell

examples in archive for, Examples

global (not possible), Types of Global Customization

order of precedence for, Functions

processing on command line, Command-Line Processing

recursive, Command-Line Processing

wildcards in, Aliases

ampersand (&), Background Jobs, Combinations of Exit Statuses, File attribute checking, Integer Variables and Arithmetic, Integer Variables and Arithmetic, I/O Redirectors, Job Control

&& (logical and operator), Combinations of Exit Statuses, File attribute checking, Integer Variables and Arithmetic

&\\> (output and error redirection), I/O Redirectors

bitwise and operator, Integer Variables and Arithmetic

running commands in background, Background Jobs, Job Control

angle brackets, Control-Key Signals (see greater than sign less than sign)

archive file for bash, Unpacking the Archive, What's in the Archive

arguments, Commands, Arguments, and Options, Positional Parameters, Positional parameters in functions, for, for, Options with Arguments

for command-line options, Options with Arguments

in for statement list, for, for

positional parameters for, Positional Parameters, Positional parameters in functions

arithmetic (integer) variables, Typed Variables, Typed Variables, Arithmetic Variables and Assignment, Arithmetic Variables and Assignment

assignment, Arithmetic Variables and Assignment, Arithmetic Variables and Assignment

declaring, Typed Variables, Typed Variables

arithmetic conditionals, Arithmetic Conditionals

arithmetic expressions, Integer Variables and Arithmetic, Integer Variables and Arithmetic, Integer Variables and Arithmetic, Integer Variables and Arithmetic, Command-Line Processing

associativity in, Integer Variables and Arithmetic

evaluation of, Command-Line Processing

precedence in, Integer Variables and Arithmetic

syntax for, Integer Variables and Arithmetic

arithmetic for statement, Arithmetic for Loops, Arrays, Arrays

arithmetic operators, Integer Conditionals, Integer Variables and Arithmetic

arrays, Typed Variables, Typed Variables, Arrays, Arrays, Arrays, Arrays, Arrays, Arrays, Arrays, Arrays, Reading user input, Breakpoints, Configuring and Building bash, The Korn Shell, The Korn Shell

assigning to themselves (bug), Breakpoints

assigning values to, Arrays

associative, Korn, The Korn Shell

declaring, Arrays

declaring variables as, Typed Variables, Typed Variables

deleting, Arrays

deleting elements of, Arrays

element length operator for, Arrays

one-dimensional, Configuring and Building bash, The Korn Shell

reading values into, Reading user input

special indices for, Arrays

arrow keys, emacs, Basic Commands, Moving Around in the History List

assignment of arithmetic variables, Arithmetic Variables and Assignment, Arithmetic Variables and Assignment

associative arrays, Korn, The Korn Shell

asterisk (*), Filenames, Wildcards, and Pathname Expansion, Textual Completion, History Expansion, Positional Parameters, Quoting with $@ and $*, Patterns and Pattern Matching, Extended Pattern Matching, Integer Variables and Arithmetic, Integer Variables and Arithmetic, Arrays, Built-In Shell Variables

** (exponentiation operator), Integer Variables and Arithmetic

environment variable, Positional Parameters, Quoting with $@ and $*, Built-In Shell Variables

extended pattern-matching operator, Extended Pattern Matching

multiplication operator, Integer Variables and Arithmetic

pattern-matching operator, Patterns and Pattern Matching

special array index, Arrays

textual completion, vi, Textual Completion

wildcard, Filenames, Wildcards, and Pathname Expansion

word designator, History Expansion

at sign (@), Textual Completion, Positional Parameters, Quoting with $@ and $*, Extended Pattern Matching, Arrays, Built-In Shell Variables

environment variable, Positional Parameters, Quoting with $@ and $*, Built-In Shell Variables

extended pattern-matching operator, Extended Pattern Matching

hostname completion, Textual Completion

special array index, Arrays

AT&T UWIN package, AT&T UWIN

auto_resume environment variable, Built-In Shell Variables

awk command, Command Substitution

B

b command, vi, Simple Control Mode Commands, Simple Control Mode Commands

B command, vi, Simple Control Mode Commands, Simple Control Mode Commands

background I/O, Background I/O

background jobs, Background Jobs, Background Jobs and Priorities, Background Jobs, Background Jobs and Priorities, File Descriptors, eval, Process IDs and Job Numbers, Job Control, Foreground and Background, Suspending a Job, Suspending a Job, Process ID Variables and Temporary Files, wait

bringing to foreground, Foreground and Background

job number for, Process IDs and Job Numbers

priority of, Background Jobs and Priorities

process ID for, Process ID Variables and Temporary Files

saving standard output and error to one file, File Descriptors, eval

sending foreground jobs to, Suspending a Job

sending job to background, Suspending a Job

starting, Background Jobs, Job Control

waiting until finished, wait

backslash (\\\\), Backslash-Escaping, Continuing Lines, Textual Completion, echo escape sequences, Reading user input, Configuring and Building bash

backslash-escaping, Backslash-Escaping

continuation character, Continuing Lines, Reading user input

escape character, echo, echo escape sequences

escape character, prompt strings, Configuring and Building bash

textual completion, vi, Textual Completion

BACKSPACE command, Control Keys

bash, bash Versions, Summary of bash Features, Scope of This Book, The Bourne Again Shell, The Bourne Again Shell, Features of bash, Getting bash, Getting bash, Getting bash, Interactive Shell Use, Help, Customizing Your Environment, Options, shopt, Shell Variables, Variables and Quoting, Miscellaneous variables, Miscellaneous variables, Basic Shell Programming, Shell Variables, Installing bash as the Standard Shell, POSIX Mode, Command-Line Options, Command-Line Options, Command-Line Options, Environment Customization, Types of Global Customization, Types of Global Customization, System Security Features, Privileged Mode, Restricted Shell, Privileged Mode, Don't Use bash, Obtaining bash, Unpacking the Archive, What's in the Archive, What's in the Archive, What's in the Archive, Documentation, Configuring and Building bash, Configuring and Building bash, Configuring and Building bash, Configuring and Building bash, Configuring and Building bash, Testing bash, Testing bash, Potential Problems, Installing bash as a Login Shell, Examples, Who Do I Turn to?, Asking Questions, Asking Questions, Reporting Bugs, Invocation, Invocation

archive file for, What's in the Archive

bugs in, reporting, Reporting Bugs

building, Configuring and Building bash

configuring, Configuring and Building bash, Configuring and Building bash

customizing environment for, Environment Customization, Types of Global Customization

documentation for, What's in the Archive, Documentation

environment, Customizing Your Environment

examples in archive for, What's in the Archive, Examples

features of, Summary of bash Features, Features of bash

global customization of, Types of Global Customization

help for, Who Do I Turn to?

history of, The Bourne Again Shell

installing, Configuring and Building bash

installing as login shell, Getting bash, Installing bash as a Login Shell

installing as standard shell, Installing bash as the Standard Shell

interactive use of, Interactive Shell Use

location of, determining, Getting bash

newsgroups for, Asking Questions

obtaining, Getting bash, Obtaining bash

online help for, Help

options, Options, shopt, Invocation, Invocation

pathname of, Miscellaneous variables

POSIX mode, POSIX Mode, Command-Line Options

privileged mode, Privileged Mode

programming featuers of, Basic Shell Programming

restricted shell, Command-Line Options, Restricted Shell, Configuring and Building bash

security, System Security Features, Privileged Mode

shell variables, Shell Variables, Variables and Quoting, Shell Variables

support for, Asking Questions

testing, Testing bash, Testing bash

troubleshooting installation of, Potential Problems

unpacking archive file, Unpacking the Archive

version of, determining, Miscellaneous variables, Command-Line Options

versions of, bash Versions, The Bourne Again Shell

when not to use, Don't Use bash

bash command, Getting bash, Set Options, Set Options, Set Options, Set Options, Set Options, Set Options, DEBUG, RETURN, POSIX Mode, Command-Line Options, Command-Line Options, Command-Line Options, Command-Line Options, Command-Line Options, Command-Line Options, Command-Line Options, Command-Line Options, Command-Line Options, Command-Line Options, Command-Line Options, Command-Line Options, Command-Line Options, Command-Line Options, Command-Line Options, Command-Line Options, Command-Line Options, Command-Line Options, Command-Line Options, Command-Line Options, Command-Line Options, Command-Line Options, Command-Line Options, Command-Line Options, Command-Line Options, Starting Up, Starting Up, Configuring and Building bash, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation, Invocation

- option, Command-Line Options, Invocation

- option (old), Invocation

--debugger option, RETURN, Command-Line Options, Invocation

debugging, Command-Line Options

--dump-po-strings option, Command-Line Options, Invocation

--dump-strings option, Command-Line Options, Invocation

--help option, Command-Line Options, Starting Up, Invocation

--init-file option, Command-Line Options, Invocation

--login option, Command-Line Options, Invocation

--noediting option, Command-Line Options, Invocation

--noprofile option, Command-Line Options, Invocation

--norc option, Command-Line Options, Invocation

--posix option, POSIX Mode, Command-Line Options, Invocation

--quiet option, Command-Line Options, Invocation

--rcfile option, Command-Line Options, Invocation

--verbose option, Command-Line Options, Invocation

--version option, Command-Line Options, Starting Up, Invocation

-c option, Command-Line Options, Invocation

-c option (old), Invocation

-D option, Command-Line Options, Invocation

-i option, Command-Line Options, Invocation

-i option (old), Invocation

-l option, Command-Line Options, Invocation

-login option (old), Invocation

-n option, Set Options, Set Options

-nobraceexpansion option (old), Invocation

-nolineediting option (old), Invocation

-noprofile option (old), Invocation

-norc option (old), Invocation

-o option, Command-Line Options, Invocation

-O, +O options, Command-Line Options, Invocation

-posix option (old), Invocation

-quiet option (old), Invocation

-r option, Command-Line Options, Configuring and Building bash, Invocation

-r option (old), Invocation

-rcfile option (old), Invocation

-s option, Command-Line Options, Invocation

-s option (old), Invocation

-T option, DEBUG

-v option, Set Options, Set Options, Command-Line Options, Invocation

-version option (old), Invocation

-x option, Set Options, Set Options

options for, list of, Command-Line Options, Invocation, Invocation

bash Completion Project, Programmable Completion

Bash Debugger Project, Debugger limitations

BASH environment variable, Miscellaneous variables, Other common variables, Built-In Shell Variables

bashbug script, Reporting Bugs

bashdb debugger, Debugging Shell Programs, A bash Debugger, The Preamble, A bash Debugger, A bash Debugger, The driver script, The Preamble, The Preamble, Debugger Functions, Debugger limitations, Commands, Commands, Commands, Commands, Stepping, Breakpoints, Break conditions, Execution tracing, Debugger limitations, A Sample bashdb Session, A Sample bashdb Session, Exercises, Exercises

break conditions, Break conditions

breakpoints feature, A bash Debugger, Commands, Breakpoints

commands for, Commands, Commands

driver script for, The driver script

execution tracing, Execution tracing

exercises for, Exercises

functions file for, The Preamble

functions for, Debugger Functions, Debugger limitations

limitations of, Debugger limitations

preamble file for, The Preamble

sample session of, A Sample bashdb Session, A Sample bashdb Session

source code for, Exercises

stepping feature, A bash Debugger, Commands, Stepping

.bashrc file, The .bash_profile, .bash_logout, and .bashrc Files, The Environment File

BASH_ARGC environment variable, Debugging Variables, Built-In Shell Variables

BASH_ARGV environment variable, Debugging Variables, Built-In Shell Variables

BASH_COMMAND environment variable, Built-In Shell Variables

BASH_ENV environment variable, Restricted Shell, Privileged Mode, Built-In Shell Variables

BASH_EXECUTION_STRING environment variable, Built-In Shell Variables

.bash_history file, The History List

BASH_LINENO environment variable, Debugging Variables, Built-In Shell Variables

.bash_login file, The .bash_profile, .bash_logout, and .bashrc Files

.bash_logout file, The .bash_profile, .bash_logout, and .bashrc Files

.bash_profile file, The .bash_profile, .bash_logout, and .bashrc Files, Customization Hints

BASH_REMATCH environment variable, Built-In Shell Variables

BASH_SOURCE environment variable, Debugging Variables, Built-In Shell Variables

BASH_SUBSHELL environment variable, Built-In Shell Variables

BASH_VERSINFO environment variable, Miscellaneous variables, Built-In Shell Variables

BASH_VERSION environment variable, bash Versions, Miscellaneous variables, Built-In Shell Variables

bc command, debugger, Commands, Break conditions

bell-style variable, readline, readline variables

bg command, Suspending a Job, Configuring and Building bash, Built-In Commands and Reserved Words

biff command, Mail variables

bind command, Key Bindings Using bind, Built-In Commands and Reserved Words

books, Intended Audience, Privileged Mode

Learning the UNIX Operating System (Peek, Todino, Strang), Intended Audience

Practical UNIX and Internet Security (Spafford, Garfinkel), Privileged Mode

Bourne Again shell, Preface (see bash)

Bourne shell, History of UNIX Shells (see sh)

Bourne, Steven, History of UNIX Shells, History of UNIX Shells

bp command, debugger, Commands, Breakpoints

brace expansion, Brace Expansion, Command-Line Processing, Configuring and Building bash

braces ({}), Brace Expansion, More on Variable Syntax, Command blocks

brace expansion wildcards, Brace Expansion

command blocks in, Command blocks

in shell variable syntax, More on Variable Syntax

brackets ([]), Filenames, Wildcards, and Pathname Expansion, Condition Tests, Condition Tests, Potential Problems, Configuring and Building bash, Test Operators, Test Operators, Test Operators, Test Operators

wildcard, Filenames, Wildcards, and Pathname Expansion

[...] (condition test), Condition Tests, Potential Problems, Test Operators, Test Operators

[[...]] (condition test), Condition Tests, Configuring and Building bash, Test Operators, Test Operators

break command, Built-In Commands and Reserved Words

break conditions, Break conditions

break statement, select

breakpoints, A bash Debugger, Commands, Breakpoints

BSD-derived systems, ps command on, BSD

bugs, reporting, Reporting Bugs

built-in functions, Loadable Built-Ins, Loadable Built-Ins, Loadable Built-Ins

in bash archive, Loadable Built-Ins

loadable, Loadable Built-Ins, Loadable Built-Ins

builtin command, Functions, Exit Status, command, builtin, and enable, Restricted Shell, Configuring and Building bash, The Bourne Shell, Built-In Commands and Reserved Words

-p option, Restricted Shell

Bourne shell not supporting, The Bourne Shell

C

C command, vi, Deletion Commands

C shell, Summary of bash Features (see csh)

caret (^), Simple Control Mode Commands, History Expansion, History Expansion, Integer Variables and Arithmetic, Control-Key Signals, Installing bash as the Standard Shell, The Bourne Shell

bitwise exclusive or operator, Integer Variables and Arithmetic

event designator, History Expansion

pipe character, Installing bash as the Standard Shell, The Bourne Shell

representing CTRL key, Control-Key Signals

vi command, Simple Control Mode Commands

word designator, History Expansion

case sensitivity, Miscellaneous Commands

case statement, case, case

cat command, Standard I/O, Standard I/O

cb command, debugger, Commands, Breakpoints

cc command, vi, Deletion Commands

cd command, Changing working directories, Changing working directories, Changing working directories, shopt, Directory search path and variables, Advanced Examples: pushd and popd, Restricted Shell, The Bourne Shell, Built-In Commands and Reserved Words

- option, Changing working directories, Advanced Examples: pushd and popd

Bourne shell support, The Bourne Shell

CDPATH variable and, Directory search path and variables

in restricted shell, Restricted Shell

variables in, shopt

cdable_vars shell option, shopt, Directory search path and variables

CDPATH environment variable, Directory search path and variables, Built-In Shell Variables

character-based user interfaces, bash Basics

checkhash shell option, shopt

chmod command, Shell Scripts and Functions

chsh command, Getting bash, Installing bash as a Login Shell

circumflex, Control-Key Signals (see caret)

cmdhist shell option, shopt

cmp command, Process Substitution

code examples, Code Examples (see examples)

colon (:), Syntax of String Operators, Syntax of String Operators, Syntax of String Operators, Syntax of String Operators, Syntax of String Operators, Syntax of String Operators, Syntax of String Operators, Advanced Examples: pushd and popd, Built-In Commands and Reserved Words

:+ (string operator), Syntax of String Operators, Syntax of String Operators

:- (string operator), Syntax of String Operators

:= (string operator), Syntax of String Operators, Syntax of String Operators

:? (string operator), Syntax of String Operators, Advanced Examples: pushd and popd

command, Built-In Commands and Reserved Words

string operator, Syntax of String Operators

COLUMNS environment variable, Environment Variables, Other common variables

comma (,), Character-Finding Commands, Integer Variables and Arithmetic

sequential evaluation operator, Integer Variables and Arithmetic

vi command, Character-Finding Commands

command aliases, Aliases

command blocks, Command blocks, The IEEE 1003.2 POSIX Shell Standard

command command, Functions, for, command, builtin, and enable, command, builtin, and enable, command, builtin, and enable, command, builtin, and enable, command, builtin, and enable, The Bourne Shell, Built-In Commands and Reserved Words

- option, command, builtin, and enable

-p option, command, builtin, and enable

-v option, command, builtin, and enable

-V option, command, builtin, and enable

Bourne shell not supporting, The Bourne Shell

command history, Command-Line Editing, Enabling Command-Line Editing, The History List, Moving Around in the History List, Moving Around in the History List, Moving Around in the History List, The fc Command, The fc Command, History Expansion, shopt, shopt, Editing mode variables, Editing mode variables, Built-In Commands and Reserved Words

appending to, shopt

displaying, Built-In Commands and Reserved Words

emacs editing mode, Moving Around in the History List

expansion commands, History Expansion

fc command, Enabling Command-Line Editing, The fc Command, The fc Command

multiple-line commands in, shopt

size of, Editing mode variables

time stamp for, Editing mode variables

vi editing mode, Moving Around in the History List, Moving Around in the History List

command line processing, Command-Line Processing, Command-Line Processing, Quoting, command, builtin, and enable, command, builtin, and enable, command, builtin, and enable, eval, eval

builtin command affecting, command, builtin, and enable

command command affecting, command, builtin, and enable

enable command affecting, command, builtin, and enable

quoting affecting, Quoting

repeating, eval, eval

command substitution, Command Substitution, Command Substitution, The Bourne Shell

command-line editing, Features of bash, Enabling Command-Line Editing, emacs Editing Mode, Miscellaneous Commands, vi Editing Mode, Miscellaneous Commands, The fc Command, The fc Command, History Expansion, readline, Key Bindings Using bind, Keyboard Habits, Editing mode variables, Editing mode variables

command history with fc command, The fc Command, The fc Command

emacs editing mode, emacs Editing Mode, Miscellaneous Commands

history expansion, History Expansion

readline editing interface, readline, Key Bindings Using bind

selecting editing mode, Enabling Command-Line Editing

shell variables for, Editing mode variables, Editing mode variables

vi editing mode, vi Editing Mode, Miscellaneous Commands

which editing mode to use, Keyboard Habits

command-line options, Commands, Arguments, and Options, Options, shopt, Command-Line Options, getopts, Options with Arguments, Starting Up, Starting Up, Invocation, Invocation

for bash, list of, Invocation, Invocation

for bash, setting, Options, shopt

guidelines for, Starting Up, Starting Up

handling with positional parameters, Command-Line Options, getopts

with arguments, Options with Arguments

commands, Getting bash, Interactive Shell Use, Interactive Shell Use, Commands, Arguments, and Options, Commands, Arguments, and Options, Changing working directories, Changing working directories, Changing working directories, Filenames, Wildcards, and Pathname Expansion, Standard I/O, Standard I/O, Standard I/O, Standard I/O, Standard I/O, Standard I/O, Standard I/O, Pipelines, Pipelines, Background Jobs, Background Jobs and Priorities, Background Jobs, Background I/O, Background Jobs and Priorities, Backslash-Escaping, Continuing Lines, Control Keys, Help, Command-Line Editing, Enabling Command-Line Editing, Enabling Command-Line Editing, The fc Command, The fc Command, Key Bindings Using bind, The .bash_profile, .bash_logout, and .bashrc Files, The .bash_profile, .bash_logout, and .bashrc Files, Aliases, Aliases, Aliases, Aliases, Options, shopt, shopt, shopt, shopt, Shell Variables, Shell Variables, Shell Variables, Shell Variables, Editing mode variables, Mail variables, Command search path, Command hashing, Command hashing, Directory search path and variables, Environment Variables, Environment Variables, Shell Scripts and Functions, Shell Scripts and Functions, Functions, Functions, Functions, Functions, Functions, Functions, Functions, Functions, Positional Parameters, Positional parameters in functions, Local Variables in Functions, Quoting with $@ and $*, Syntax of String Operators, Syntax of String Operators, Command Substitution, Command Substitution, Command Substitution, Command Substitution, Advanced Examples: pushd and popd, Exit Status, Combinations of Exit Statuses, Exit Status, Exit Status, Condition Tests, File attribute checking, for, for, for, for, for, shift, Options with Arguments, getopts, Typed Variables, Typed Variables, Typed Variables, Integer Variables and Arithmetic, Arithmetic Variables and Assignment, Arithmetic Variables and Assignment, Arithmetic Variables and Assignment, Arithmetic Variables and Assignment, Arithmetic Variables and Assignment, Arithmetic Variables and Assignment, Arithmetic Variables and Assignment, Arithmetic Variables and Assignment, Arrays, Arrays, File Descriptors, echo, printf, Additional bash printf specifiers, read, Reading user input, I/O redirection and multiple commands, Command blocks, Reading user input, command, builtin, and enable, command, builtin, and enable, command, builtin, and enable, command, builtin, and enable, eval, eval, Foreground and Background, Foreground and Background, Suspending a Job, Signals, Control-Key Signals, kill, kill, ps, BSD, trap, Resetting Traps, trap, trap, Process ID Variables and Temporary Files, Ignoring Signals, disown, wait, Process Substitution, Basic Debugging Aids, Fake Signals, RETURN, RETURN, RETURN, Commands, Breakpoints, Installing bash as the Standard Shell, umask, ulimit, ulimit, Restricted Shell, Restricted Shell, Restricted Shell, Restricted Shell, Configuring and Building bash, Configuring and Building bash, Configuring and Building bash, Configuring and Building bash, Configuring and Building bash, Configuring and Building bash, Configuring and Building bash, Configuring and Building bash, Configuring and Building bash, Configuring and Building bash, Configuring and Building bash, Configuring and Building bash, Configuring and Building bash, Configuring and Building bash, Installing bash as a Login Shell, The Bourne Shell, The Bourne Shell, The Bourne Shell, The Bourne Shell, The IEEE 1003.2 POSIX Shell Standard, The Korn Shell, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words, shopt Options, shopt Options, Loadable Built-Ins, Programmable Completion, Programmable Completion, Programmable Completion, Programmable Completion

. (dot), Built-In Commands and Reserved Words

: (colon), Built-In Commands and Reserved Words

alias command, Aliases, Built-In Commands and Reserved Words

arguments for, Commands, Arguments, and Options

arguments for, in for statement list, for, for

arguments for, positional parameters for, Positional Parameters, Positional parameters in functions

awk command, Command Substitution

bash command, The .bash_profile, .bash_logout, and .bashrc Files

bg command, Suspending a Job, Configuring and Building bash, Built-In Commands and Reserved Words

biff command, Mail variables

bind command, Key Bindings Using bind, Built-In Commands and Reserved Words

break command, Built-In Commands and Reserved Words

built-in, list of, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words

builtin command, Functions, Exit Status, command, builtin, and enable, Restricted Shell, Configuring and Building bash, Built-In Commands and Reserved Words

cat command, Standard I/O, Standard I/O

cd command, Changing working directories, Changing working directories, shopt, Directory search path and variables, Advanced Examples: pushd and popd, Restricted Shell, Built-In Commands and Reserved Words

chmod command, Shell Scripts and Functions

chsh command, Getting bash, Installing bash as a Login Shell

cmp command, Process Substitution

command command, Functions, for, command, builtin, and enable, Built-In Commands and Reserved Words

compgen command, Built-In Commands and Reserved Words, Programmable Completion, Programmable Completion

complete command, Built-In Commands and Reserved Words, Programmable Completion, Programmable Completion

continue command, Built-In Commands and Reserved Words

continuing beyond a single line, Continuing Lines, Reading user input

countargs command, Quoting with $@ and $*

cut command, Standard I/O, Command Substitution

date command, Integer Variables and Arithmetic

dc command, Command blocks

declare command, Functions, Typed Variables, Arrays, RETURN, Built-In Commands and Reserved Words

determining source of, Functions

diff command, Background I/O, Exit Status

dirs command, Arithmetic Variables and Assignment, Configuring and Building bash, The Korn Shell, Built-In Commands and Reserved Words

disown command, disown, Built-In Commands and Reserved Words

du command, Arithmetic Variables and Assignment, Arithmetic Variables and Assignment

echo command, Shell Variables, Shell Variables, Syntax of String Operators, File attribute checking, for, echo, Basic Debugging Aids, Built-In Commands and Reserved Words

editing on command line, Command-Line Editing (see command-line editing)

enable command, Functions, command, builtin, and enable, Restricted Shell, Configuring and Building bash, Built-In Commands and Reserved Words, Loadable Built-Ins

eval command, eval, eval, Built-In Commands and Reserved Words

exec command, shopt, Restricted Shell, Built-In Commands and Reserved Words

exit command, Interactive Shell Use, Process ID Variables and Temporary Files, Built-In Commands and Reserved Words

exit status of, Exit Status, Combinations of Exit Statuses

export command, Environment Variables, Environment Variables, Built-In Commands and Reserved Words

fc command, Enabling Command-Line Editing, The fc Command, The fc Command, Configuring and Building bash, Built-In Commands and Reserved Words

fg command, Foreground and Background, Configuring and Building bash, Built-In Commands and Reserved Words

file command, Installing bash as the Standard Shell

find command, Backslash-Escaping

for bashdb debugger, Commands

getopts command, getopts, Built-In Commands and Reserved Words

grep command, Standard I/O, Command Substitution

hash command, Command hashing, Built-In Commands and Reserved Words

hashing, Command hashing

help command, Help, Configuring and Building bash, The Bourne Shell, Built-In Commands and Reserved Words

history command, Configuring and Building bash, Built-In Commands and Reserved Words

in hash table, shopt

jobs command, Background Jobs, Foreground and Background, kill, Configuring and Building bash, Built-In Commands and Reserved Words

kill command, Signals, kill, trap, Built-In Commands and Reserved Words

let command, Arithmetic Variables and Assignment, Built-In Commands and Reserved Words

local command, Local Variables in Functions, The Bourne Shell, Built-In Commands and Reserved Words

logout command, Interactive Shell Use, Built-In Commands and Reserved Words

ls command, Filenames, Wildcards, and Pathname Expansion, Aliases, for

make command, Configuring and Building bash

more command, Pipelines, Pipelines

multiple, I/O redirection and, I/O redirection and multiple commands

nice command, Background Jobs and Priorities

nohup command, Ignoring Signals

number of, determining, Editing mode variables

order of precedence for, Functions

popd command, Arithmetic Variables and Assignment, Arithmetic Variables and Assignment, Configuring and Building bash, Built-In Commands and Reserved Words

precedence of, overriding, command, builtin, and enable

precedence of, POSIX, The IEEE 1003.2 POSIX Shell Standard

printf command, printf, Additional bash printf specifiers

ps command, ps, BSD

pushd command, Arithmetic Variables and Assignment, Arithmetic Variables and Assignment, Configuring and Building bash, Built-In Commands and Reserved Words

pwd command, Changing working directories, Built-In Commands and Reserved Words

rbash command, Configuring and Building bash

read command, read, Reading user input, Built-In Commands and Reserved Words

readonly command, Typed Variables, Built-In Commands and Reserved Words

renaming, Aliases (see aliases)

return command, Built-In Commands and Reserved Words

running in background, Background Jobs, Background Jobs and Priorities

sed command, Standard I/O

set command, Enabling Command-Line Editing, Options (see set command)

shell variables in, Shell Variables

shift command, shift, Options with Arguments, Built-In Commands and Reserved Words

shopt command, shopt, RETURN, shopt Options, shopt Options

sort command, Standard I/O, Syntax of String Operators, Breakpoints

source command, The .bash_profile, .bash_logout, and .bashrc Files, Shell Scripts and Functions

stty command, Control Keys, Control-Key Signals

suspend command, Built-In Commands and Reserved Words

tee command, File Descriptors

test command, Condition Tests, Built-In Commands and Reserved Words

time command, Configuring and Building bash

times command, Built-In Commands and Reserved Words

tr command, Standard I/O

trap command, trap, Resetting Traps, Fake Signals, RETURN, Built-In Commands and Reserved Words

true command, trap

type command, Command search path, Functions, Built-In Commands and Reserved Words

typeset command, Typed Variables, Built-In Commands and Reserved Words

ulimit command, ulimit, ulimit, The Bourne Shell, Built-In Commands and Reserved Words

umask command, umask, The Bourne Shell, Built-In Commands and Reserved Words

unalias command, Aliases, Built-In Commands and Reserved Words

unset command, Shell Variables, Functions, Arrays, Built-In Commands and Reserved Words

wait command, wait, Built-In Commands and Reserved Words

who command, Command Substitution

comment-begin variable, readline, readline variables

comments, Miscellaneous Commands, Syntax of String Operators, Command blocks, Comments

guidelines for, Comments

in input files, handling, Command blocks

prepending, vi, Miscellaneous Commands

compgen command, Built-In Commands and Reserved Words, Programmable Completion, Programmable Completion

COMPGEN variable, Programmable Completion

complete command, Built-In Commands and Reserved Words, Programmable Completion, Programmable Completion

completion, textual, Textual Completion, Textual Completion, Textual Completion, Configuring and Building bash, Programmable Completion, Programmable Completion

emacs editing mode, Textual Completion, Textual Completion

programmable, Configuring and Building bash, Programmable Completion, Programmable Completion

vi editing mode, Textual Completion

completion-query-items variable, readline, readline variables

COMPREPLY environment variable, Built-In Shell Variables

COMP_CWORD environment variable, Built-In Shell Variables

COMP_LINE environment variable, Built-In Shell Variables

COMP_POINT environment variable, Built-In Shell Variables

COMP_WORDBREAKS environment variable, Built-In Shell Variables

COMP_WORDS environment variable, Built-In Shell Variables

concurrency control, Parallelization

conditional construct, if/else, case, case, select, select

case statement, case, case

select statement, select, select

conditionals, readline editing interface, The readline Startup File

conditions, if/else, Exit Status, Combinations of Exit Statuses, Combinations of Exit Statuses, Condition Tests, Integer Conditionals, String comparisons, String comparisons, File attribute checking, File attribute checking, Integer Conditionals, Arithmetic Conditionals

arithmetic operators for, Arithmetic Conditionals

exit status determining, Exit Status, Combinations of Exit Statuses

file attribute checking, File attribute checking, File attribute checking

integer comparisons, Integer Conditionals

logical operators for, Combinations of Exit Statuses

string comparisons, String comparisons, String comparisons

testing, Condition Tests, Integer Conditionals

configure script, Configuring and Building bash, Configuring and Building bash, Configuring and Building bash

--disable option, Configuring and Building bash

--enable option, Configuring and Building bash

constants, naming, Variables and Constants

contact information, We'd Like to Hear from You

continuation character (\\\\), Continuing Lines, Reading user input

continue command, Built-In Commands and Reserved Words

continuing lines, Continuing Lines

control keys, Control Keys, Command-Line Editing, Basic Commands, Line Commands, Moving Around in the History List, Textual Completion, Miscellaneous Commands, vi Editing Mode, Miscellaneous Commands

conflicting with editing mode commands, Command-Line Editing

emacs commands, Basic Commands, Line Commands, Moving Around in the History List, Textual Completion, Miscellaneous Commands

vi commands, vi Editing Mode, Miscellaneous Commands

control mode, vi editing mode, vi Editing Mode, Simple Control Mode Commands

control-key signals, Control-Key Signals

conventions used in this book, Conventions Used in This Handbook

convert-meta variable, readline, readline variables

copy file example, while and until

COPYING file, bash archive, What's in the Archive

Copyleft for bash, What's in the Archive

copylefted software, The Bourne Again Shell

coroutines, Coroutines, Parallelization, The Korn Shell

countargs command, Quoting with $@ and $*

CPU-intensive processes, Advantages and Disadvantages of Coroutines

csh (C shell), Summary of bash Features, History of UNIX Shells, History of UNIX Shells, Enabling Command-Line Editing

fc command, Enabling Command-Line Editing

features from, included in bash, Summary of bash Features

CTRL keys, Control Keys (see control keys)

CTRL-? command, Control Keys, Control Keys

CTRL-A command, emacs, Line Commands

CTRL-B command, emacs, Basic Commands

CTRL-C command, Control Keys, Control Keys, Suspending a Job, Control-Key Signals, trap

CTRL-D command, Interactive Shell Use, Interactive Shell Use, Control Keys, Control Keys, Options, select

CTRL-D command, emacs, Basic Commands, Basic Commands

CTRL-E command, emacs, Line Commands

CTRL-F command, emacs, Basic Commands

CTRL-H command, Control Keys, Control Keys

CTRL-J command, emacs, Miscellaneous Commands, Miscellaneous Commands

CTRL-K command, emacs, Line Commands

CTRL-L command, emacs, Miscellaneous Commands

CTRL-L command, vi, Miscellaneous Commands

CTRL-M command, Control Keys

CTRL-M command, emacs, Miscellaneous Commands, Miscellaneous Commands

CTRL-N command, emacs, Moving Around in the History List

CTRL-O command, emacs, Miscellaneous Commands, Miscellaneous Commands

CTRL-P command, emacs, Moving Around in the History List

CTRL-Q command, Control Keys, Control Keys, Control Keys

CTRL-R command, emacs, Moving Around in the History List

CTRL-S command, Control Keys, Control Keys

CTRL-T command, emacs, Miscellaneous Commands

CTRL-U command, Control Keys

CTRL-U command, emacs, Miscellaneous Commands

CTRL-V command, emacs, Miscellaneous Commands, Miscellaneous Commands, Miscellaneous Commands

CTRL-V command, vi, vi Editing Mode

CTRL-W command, emacs, Miscellaneous Commands

CTRL-W command, vi, vi Editing Mode

CTRL-X ! command, emacs, Textual Completion

CTRL-X $ command, emacs, Textual Completion, Textual Completion

CTRL-X / command, emacs, Textual Completion

CTRL-X @ command, emacs, Textual Completion

CTRL-Y command, Suspending a Job

CTRL-Y command, emacs, Word Commands, Word Commands

CTRL-Z command, Control Keys, Suspending a Job, Suspending a Job, Control-Key Signals

CTRL-[ command, emacs, Miscellaneous Commands

CTRL-\\\\ command, Control Keys, Control Keys, Control-Key Signals

current directory, The working directory (see working directory)

cut command, Standard I/O, Command Substitution, Command Substitution

cygwin environment (Cygnus Consulting), Cygwin

D

D command, vi, Deletion Commands, Deletion Commands

d$ command, vi, Deletion Commands

d0 command, vi, Deletion Commands

data filtering utilities, Standard I/O

date command, Integer Variables and Arithmetic

db command, vi, Deletion Commands

dB command, vi, Deletion Commands

dc command, Command blocks

dd command, vi, Deletion Commands, Deletion Commands

DEBUG signal, Fake Signals, DEBUG, Breakpoints

debugging, Debugging Shell Programs, Basic Debugging Aids, Basic Debugging Aids, Set Options, Set Options, Fake Signals, RETURN, Debugging Variables, A bash Debugger, The Preamble, Debugger Functions, Debugger limitations, Commands, Commands, A Sample bashdb Session, A Sample bashdb Session, Exercises, Reporting Bugs

bashdb debugger, Debugging Shell Programs, A bash Debugger, The Preamble, Debugger Functions, Debugger limitations, Commands, Commands, A Sample bashdb Session, A Sample bashdb Session, Exercises

commands for, Commands, Commands

functions for, Debugger Functions, Debugger limitations

sample session of, A Sample bashdb Session, A Sample bashdb Session

source code for, Exercises

bugs in bash, reporting, Reporting Bugs

echo command, Basic Debugging Aids

environment variables for, Debugging Variables

fake signals, Fake Signals, RETURN

set command, Set Options, Set Options

declare command, Functions, Typed Variables, Typed Variables, Typed Variables, Typed Variables, Typed Variables, Typed Variables, Typed Variables, Typed Variables, Typed Variables, Typed Variables, Typed Variables, Arrays, Arrays, RETURN, Built-In Commands and Reserved Words

-a option, Typed Variables, Typed Variables, Arrays

-f option, Functions, Typed Variables, Typed Variables

-F option, Typed Variables, Typed Variables, RETURN

-i option, Typed Variables, Typed Variables

-r option, Typed Variables, Typed Variables, Arrays

DEL command, Control Keys, Control Keys, Control Keys

DEL command, emacs, Basic Commands, Basic Commands

DEL command, vi, vi Editing Mode

dh command, vi, Deletion Commands

diff command, Background I/O, Exit Status

directories, Files, Directories, The working directory, Tilde notation, Changing working directories, Miscellaneous variables, Miscellaneous variables

home, Miscellaneous variables

navigating, Changing working directories

tilde (~) notation, Tilde notation

working, The working directory, Miscellaneous variables

directory listing example, Patterns and Pattern Matching, for, for, while and until

directory name, alias for, Aliases

dirs command, Arithmetic Variables and Assignment, Configuring and Building bash, The Korn Shell, Built-In Commands and Reserved Words

DIR_STACK environment variable, Advanced Examples: pushd and popd, String comparisons, Arithmetic Variables and Assignment, Built-In Shell Variables

disable-completion variable, readline, readline variables

disk space usage example, Arithmetic Variables and Assignment, Arithmetic Variables and Assignment

disown command, disown, Built-In Commands and Reserved Words

DJGPP suite, GNU tools for MS-DOS, DJGPP

dl command, vi, Deletion Commands

doc directory, bash archive, What's in the Archive, Documentation

documentation directory, bash, Documentation

dollar sign ($), Textual Completion, Simple Control Mode Commands, Simple Control Mode Commands, History Expansion, Shell Variables, Integer Variables and Arithmetic, Arithmetic Conditionals, Command-Line Processing, Process ID Variables and Temporary Files, Built-In Shell Variables

$$ (shell variable), Process ID Variables and Temporary Files

$((...)) (arithmetic expressions), Integer Variables and Arithmetic

$((...)) (arithmetic test), Arithmetic Conditionals

environment variable, Built-In Shell Variables

variable substitution, Textual Completion, Shell Variables, Command-Line Processing

vi command, Simple Control Mode Commands, Simple Control Mode Commands

word designator, History Expansion

dot (.), Changing working directories, Changing working directories, Filenames, Wildcards, and Pathname Expansion, Deletion Commands, The .bash_profile, .bash_logout, and .bashrc Files, shopt, Built-In Commands and Reserved Words

.. (parent directory), Changing working directories

command, Built-In Commands and Reserved Words

current directory, Changing working directories

preceding filenames, Filenames, Wildcards, and Pathname Expansion, shopt

synonym to source command, The .bash_profile, .bash_logout, and .bashrc Files

vi command, Deletion Commands

dot (point) in emacs, Basic Commands

dotglob shell option, shopt

double quotes ("), Quoting, Quoting Quotation Marks, Variables and Quoting, Command Substitution, Command Substitution, Integer Variables and Arithmetic, Quoting

arithmetic expressions in, Integer Variables and Arithmetic

around shell variables, Variables and Quoting

around special characters, Quoting

backslash preceding, Quoting Quotation Marks

command line processing of, Quoting

command substitution, Command Substitution

when to use, Command Substitution

ds command, debugger, Commands, Breakpoints

du command, Arithmetic Variables and Assignment, Arithmetic Variables and Assignment

dw command, vi, Deletion Commands

dW command, vi, Deletion Commands

E

e command, vi, Simple Control Mode Commands, Simple Control Mode Commands

E command, vi, Simple Control Mode Commands, Simple Control Mode Commands

echo command, Shell Variables, Syntax of String Operators, Syntax of String Operators, File attribute checking, for, echo, Options to echo, Options to echo, Options to echo, echo escape sequences, Basic Debugging Aids, The Bourne Shell, The Korn Shell, Built-In Commands and Reserved Words

-e option, Syntax of String Operators, for, Options to echo

-E option, Options to echo

-n option, Syntax of String Operators, File attribute checking, Options to echo

Bourne shell support, The Bourne Shell

escape sequences for, echo escape sequences

Korn not supporting, The Korn Shell

ed text editor, Here-documents

editing, Command-Line Editing (see command-line editing)

editing modes, emacs Editing Mode (see emacs editing mode vi editing mode)

editing-mode variable, readline, readline variables

EDITOR environment variable, The fc Command, Environment Variables, Environment Variables, Other common variables

electronic mail example, Traps and Functions

elements of arrays, Arrays

elif clause, if statement, if/else

else clause, if statement, if/else

emacs editing mode, Command-Line Editing, Enabling Command-Line Editing, emacs Editing Mode, Miscellaneous Commands, Basic Commands, Word Commands, Line Commands, Moving Around in the History List, Textual Completion, Textual Completion, Keyboard Habits, Keyboard Habits, Options, emacs Mode Commands

commands conflicting with terminal interface control keys, Command-Line Editing

commands for, list of, emacs Mode Commands

history commands, Moving Around in the History List

line commands, Line Commands

list of most-used commands, Keyboard Habits

point in, Basic Commands

selecting, Enabling Command-Line Editing, Options

textual completion, Textual Completion, Textual Completion

when to use, Keyboard Habits

word commands, Word Commands

emacs shell option, Options

enable command, Functions, command, builtin, and enable, command, builtin, and enable, command, builtin, and enable, command, builtin, and enable, command, builtin, and enable, command, builtin, and enable, command, builtin, and enable, Restricted Shell, Restricted Shell, Configuring and Building bash, The Bourne Shell, The Korn Shell, Built-In Commands and Reserved Words, Loadable Built-Ins

-a option, command, builtin, and enable

-d option, command, builtin, and enable, Restricted Shell

-f option, command, builtin, and enable, Restricted Shell

-n option, command, builtin, and enable, Configuring and Building bash

-p option, command, builtin, and enable

-s option, command, builtin, and enable

Bourne shell not supporting, The Bourne Shell

Korn not supporting, The Korn Shell

enable-keypad variable, readline, readline variables

ENV environment variable, Restricted Shell, The Korn Shell, The Korn Shell

environment, Customizing Your Environment, The .bash_profile, .bash_logout, and .bashrc Files, Shell Variables, Variables and Quoting, Customization and Subprocesses, The Environment File, Customization Hints, Environment Customization, Types of Global Customization

customizing, Customization Hints, Environment Customization, Types of Global Customization

files containing settings for, The .bash_profile, .bash_logout, and .bashrc Files

shell variables, Shell Variables, Variables and Quoting

subprocesses awareness of, Customization and Subprocesses, The Environment File

environment file, The .bash_profile, .bash_logout, and .bashrc Files, The Environment File, The Bourne Shell

environment variables, bash Versions, Getting bash, The History List, Textual Completion, The fc Command, The fc Command, The readline Startup File, Editing mode variables, Editing mode variables, Editing mode variables, Editing mode variables, Editing mode variables, Editing mode variables, Editing mode variables, Editing mode variables, Editing mode variables, Editing mode variables, Editing mode variables, Editing mode variables, Editing mode variables, Editing mode variables, Mail variables, Mail variables, Mail variables, Prompting variables, Prompting variables, Prompting variables, Prompting variables, Command search path, Directory search path and variables, Miscellaneous variables, Miscellaneous variables, Miscellaneous variables, Miscellaneous variables, Miscellaneous variables, Miscellaneous variables, Miscellaneous variables, Environment Variables, Other common variables, Environment Variables, Environment Variables, Environment Variables, Environment Variables, Environment Variables, Environment Variables, Environment Variables, Environment Variables, Environment Variables, Environment Variables, Environment Variables, Environment Variables, Environment Variables, Environment Variables, Environment Variables, Environment Variables, Terminal types, Other common variables, Other common variables, Other common variables, Other common variables, Other common variables, Shell Scripts and Functions, Shell Variables, Positional Parameters, Positional Parameters, Positional Parameters, Positional Parameters, Quoting with $@ and $*, Quoting with $@ and $*, Quoting with $@ and $*, Advanced Examples: pushd and popd, Exit Status, Exit Status, String comparisons, for, getopts, getopts, Typed Variables, Typed Variables, Arithmetic Variables and Assignment, read, Reading lines from files, Set Options, EXIT, Debugging Variables, Debugging Variables, Debugging Variables, Debugging Variables, The Preamble, The Preamble, Types of Global Customization, Types of Global Customization, Types of Global Customization, Restricted Shell, Restricted Shell, Restricted Shell, Restricted Shell, Privileged Mode, Starting Up, Configuring and Building bash, Configuring and Building bash, Configuring and Building bash, Configuring and Building bash, The Bourne Shell, The Korn Shell, The Korn Shell, pdksh, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables, Built-In Shell Variables

! (exclamation point), Built-In Shell Variables

# (hash mark), Positional Parameters, Built-In Shell Variables

$ (dollar sign), Built-In Shell Variables

* (asterisk), Positional Parameters, Quoting with $@ and $*, Built-In Shell Variables

- (hyphen), Built-In Shell Variables

0 (zero), Built-In Shell Variables

? (question mark), Exit Status, Exit Status, Built-In Shell Variables

@ (at sign), Positional Parameters, Quoting with $@ and $*, Built-In Shell Variables

auto_resume, Built-In Shell Variables

BASH, Miscellaneous variables, Other common variables, Built-In Shell Variables

BASH_ARGC, Debugging Variables, Built-In Shell Variables

BASH_ARGV, Debugging Variables, Built-In Shell Variables

BASH_COMMAND, Built-In Shell Variables

BASH_ENV, Restricted Shell, Privileged Mode, Built-In Shell Variables

BASH_EXECUTION_STRING, Built-In Shell Variables

BASH_LINENO, Debugging Variables, Built-In Shell Variables

BASH_REMATCH, Built-In Shell Variables

BASH_SOURCE, Debugging Variables, Built-In Shell Variables

BASH_SUBSHELL, Built-In Shell Variables

BASH_VERSINFO, Miscellaneous variables, Built-In Shell Variables

BASH_VERSION, bash Versions, Miscellaneous variables, Built-In Shell Variables

Bourne shell not supporting, list of, The Bourne Shell

built-in, list of, Built-In Shell Variables, Built-In Shell Variables

CDPATH, Directory search path and variables, Built-In Shell Variables

COLUMNS, Environment Variables, Other common variables

COMPREPLY, Built-In Shell Variables

COMP_CWORD, Built-In Shell Variables

COMP_LINE, Built-In Shell Variables

COMP_POINT, Built-In Shell Variables

COMP_WORDBREAKS, Built-In Shell Variables

COMP_WORDS, Built-In Shell Variables

declaring shell variables as, Typed Variables, Typed Variables

defining for subprocess only, Environment Variables

determining whether shell variable is, Environment Variables

DIR_STACK, Advanced Examples: pushd and popd, String comparisons, Arithmetic Variables and Assignment, Built-In Shell Variables

EDITOR, The fc Command, Environment Variables, Environment Variables, Other common variables

ENV, Restricted Shell, The Korn Shell, The Korn Shell

EUID, Built-In Shell Variables

exported, Environment Variables

FCEDIT, The fc Command, Editing mode variables, Built-In Shell Variables

FIGNORE, Built-In Shell Variables

FUNCNAME, Built-In Shell Variables

GLOBIGNORE, Built-In Shell Variables

GROUPS, Built-In Shell Variables

histchars, Built-In Shell Variables

HISTCMD, Editing mode variables, Editing mode variables, Built-In Shell Variables

HISTCONTROL, Editing mode variables, Editing mode variables, Built-In Shell Variables

HISTFILE, The History List, Editing mode variables, Built-In Shell Variables

HISTFILESIZE, Editing mode variables, Editing mode variables, Built-In Shell Variables

HISTIGNORE, Editing mode variables, Editing mode variables, Built-In Shell Variables

HISTSIZE, Editing mode variables, Editing mode variables, Built-In Shell Variables

HISTTIMEFORMAT, Editing mode variables, Editing mode variables, Built-In Shell Variables

HOME, Miscellaneous variables, Environment Variables, Built-In Shell Variables

HOSTFILE, Built-In Shell Variables

HOSTNAME, Built-In Shell Variables

HOSTTYPE, Built-In Shell Variables

IFS, Positional Parameters, Quoting with $@ and $*, for, Built-In Shell Variables

IGNOREEOF, Built-In Shell Variables

in .bash_profile file, Environment Variables

in subshells, Shell Scripts and Functions

INPUTRC, The readline Startup File, Built-In Shell Variables

LANG, Built-In Shell Variables

LC_ALL, Built-In Shell Variables

LC_COLLATE, Built-In Shell Variables

LC_CTYPE, Built-In Shell Variables

LC_MESSAGES, Built-In Shell Variables

LC_NUMERIC, Built-In Shell Variables

LINENO, Set Options, The Preamble, Built-In Shell Variables

LINES, Environment Variables, Other common variables

MACHTYPE, Built-In Shell Variables

MAIL, Mail variables, Environment Variables, Built-In Shell Variables

MAILCHECK, Mail variables, Built-In Shell Variables

MAILPATH, Mail variables, Built-In Shell Variables

OLDPWD, Miscellaneous variables, Built-In Shell Variables

OPTARG, getopts, Built-In Shell Variables

OPTERR, Built-In Shell Variables

OPTIND, getopts, Built-In Shell Variables

OSTYPE, Built-In Shell Variables

PATH, Command search path, Environment Variables, Restricted Shell, Built-In Shell Variables

PIPESTATUS, Built-In Shell Variables

POSIXLY_CORRECT, Built-In Shell Variables

PPID, Built-In Shell Variables

PROMPT_COMMAND, Built-In Shell Variables

PS1, Prompting variables, Types of Global Customization, Configuring and Building bash, Built-In Shell Variables

PS2, Prompting variables, Configuring and Building bash, Built-In Shell Variables

PS3, Prompting variables, Configuring and Building bash, Built-In Shell Variables

PS4, Prompting variables, Configuring and Building bash, pdksh, Built-In Shell Variables

PWD, Miscellaneous variables, Environment Variables, Built-In Shell Variables

RANDOM, EXIT, Built-In Shell Variables

REPLY, read, The Preamble, Built-In Shell Variables

scripts relying on, Starting Up

SECOND, Miscellaneous variables

SECONDS, Built-In Shell Variables

SHELL, Getting bash, Environment Variables, Other common variables, Restricted Shell, Built-In Shell Variables

SHELLOPTS, Built-In Shell Variables

SHLVL, Built-In Shell Variables

substitution, emacs editing mode, Textual Completion

TERM, Environment Variables, Environment Variables, Terminal types, Reading lines from files

TIMEFORMAT, Built-In Shell Variables

TMOUT, Types of Global Customization, Types of Global Customization, Built-In Shell Variables

UID, Built-In Shell Variables

VISUAL, Environment Variables

equal sign (=), Textual Completion, String comparisons, Integer Variables and Arithmetic

== (equal to operator), Integer Variables and Arithmetic

string comparison operator, String comparisons

textual completion, vi, Textual Completion

ERR signal, Fake Signals, ERR

error, standard, Standard I/O, File Descriptors, Reading user input

ESC command, vi, vi Editing Mode

ESC-! command, emacs, Textual Completion

ESC-$ command, emacs, Textual Completion

ESC-. command, emacs, Miscellaneous Commands, Miscellaneous Commands

ESC-/ command, emacs, Textual Completion

ESC-< command, emacs, Moving Around in the History List

ESC-? command, emacs, Textual Completion

ESC-@ command, emacs, Textual Completion

ESC-B command, emacs, Word Commands

ESC-C command, emacs, Miscellaneous Commands

ESC-CTRL-H command, emacs, Word Commands

ESC-D command, emacs, Word Commands

ESC-DEL command, emacs, Word Commands

ESC-F command, emacs, Word Commands

ESC-L command, emacs, Miscellaneous Commands, Miscellaneous Commands

ESC-TAB command, emacs, Textual Completion

ESC-U command, emacs, Miscellaneous Commands

ESC-\\> command, emacs, Moving Around in the History List

ESC-_ command, emacs, Miscellaneous Commands, Miscellaneous Commands

ESC-~ command, emacs, Textual Completion

EUID environment variable, Built-In Shell Variables

eval command, eval, eval, Built-In Commands and Reserved Words

event designators, History Expansion

examples, Code Examples, Syntax of String Operators, Patterns and Pattern Matching, Command Substitution, Command Substitution, File attribute checking, for, case, select, while and until, getopts, Arithmetic Variables and Assignment, Arithmetic Variables and Assignment, Arithmetic Variables and Assignment, Arrays, Here-documents, Here-documents, File Descriptors, eval, kill, Traps and Functions, Parallelization, What's in the Archive, Examples (see album example) (see copy file example) (see directory listing example) (see disk space usage example) (see electronic mail example) (see graphics utility example) (see killalljobs example) (see Korn cd example) (see ls example) (see ls by dates example) (see mail example) (see mail header lines, deleting, example) (see make utility example) (see multiple copies example) (see popd function example) (see printer file filter example) (see pushd directory stack example) (see pushd function example) (see selection sort example) (see standard error and output file example)

in bash archive, What's in the Archive, Examples

examples directory, bash archive, What's in the Archive

exclamation point (!), Filenames, Wildcards, and Pathname Expansion, History Expansion, Extended Pattern Matching, Combinations of Exit Statuses, String comparisons, File attribute checking, Integer Variables and Arithmetic, Integer Variables and Arithmetic, Process ID Variables and Temporary Files, Commands, Built-In Shell Variables

!= (not equal to operator), Integer Variables and Arithmetic

!= (string comparison operator), String comparisons

conditional not operator, Combinations of Exit Statuses

debugger command, Commands

environment variable, Built-In Shell Variables

event designators, History Expansion

extended pattern-matching operator, Extended Pattern Matching

logical not operator, Integer Variables and Arithmetic

negation operator, File attribute checking

negation wildcard, Filenames, Wildcards, and Pathname Expansion

process ID shell variable, Process ID Variables and Temporary Files

exec command, shopt, Restricted Shell, Built-In Commands and Reserved Words

exec statement, exec

execfail shell variable, shopt

executable files, Files

execute permission, for scripts, Shell Scripts and Functions

execution tracing, Execution tracing

exit command, Interactive Shell Use, Interactive Shell Use, Process ID Variables and Temporary Files, Built-In Commands and Reserved Words

EXIT signal, Fake Signals, EXIT, EXIT

exit statement, String comparisons

exit status of commands, Exit Status, Return, Combinations of Exit Statuses, Combinations of Exit Statuses, Combinations of Exit Statuses

combining, Combinations of Exit Statuses, Combinations of Exit Statuses

reversing, Combinations of Exit Statuses

expand-tilde variable, readline, readline variables

export command, Environment Variables, Environment Variables, Built-In Commands and Reserved Words

extglob shell option, Extended Pattern Matching

F

f command, vi, Character-Finding Commands

F command, vi, Character-Finding Commands

fake signals, Fake Signals, RETURN, The Bourne Shell

fc command, Enabling Command-Line Editing, The fc Command, The fc Command, The fc Command, The fc Command, The fc Command, The fc Command, The fc Command, The fc Command, Configuring and Building bash, Built-In Commands and Reserved Words

-e option, The fc Command

-l option, The fc Command

-m option, The fc Command

-n option, The fc Command

-s option, The fc Command

-v option, The fc Command

FCEDIT environment variable, The fc Command, Editing mode variables, Built-In Shell Variables

fg command, Foreground and Background, Configuring and Building bash, Built-In Commands and Reserved Words

FIGNORE environment variable, Built-In Shell Variables

file attribute checking, File attribute checking, File attribute checking

file attribute operators, File attribute checking

file command, Installing bash as the Standard Shell

file descriptors, I/O Redirectors, File Descriptors

filename completion, emacs editing mode, Textual Completion

filenames, Directories, Filenames, Wildcards, and Pathname Expansion, Brace Expansion, Configuring and Building bash

special handling of, Configuring and Building bash

wildcards in, Filenames, Wildcards, and Pathname Expansion, Brace Expansion

files, Files, Standard I/O, I/O Redirection, Options, I/O Redirectors, Reading lines from files, Process ID Variables and Temporary Files, umask, umask, ulimit, ulimit, Starting Up

(see also I/O)

default permissions for, umask

limits on, ulimit, ulimit

overwriting, I/O Redirectors

overwriting with output redirection, not allowing, Options

permissions for, umask

reading lines from, Reading lines from files

redirecting output to, Standard I/O

specifying on command line, Starting Up

temporary, Process ID Variables and Temporary Files

types of, Files

filtering utilities, Standard I/O

find command, Backslash-Escaping

flow control, if/else, Exit Status, String comparisons, for, for, case, case, select, select, select, select, while and until, while and until, while and until, while and until

(see also conditions)

break statement, select

case statement, case, case

exit statement, String comparisons

for statement, for, for

if statement, if/else

select statement, select, select

select statements, select

until statement, while and until, while and until

while statement, while and until, while and until

flow control statements, Flow Control

folders, Changing working directories

fonts used in this book, Conventions Used in This Handbook

for statement, for, for, Arithmetic for Loops, Arrays, Arrays, Configuring and Building bash

arithmetic, Arithmetic for Loops, Arrays, Arrays

configuring, Configuring and Building bash

foreground jobs, Background Jobs, Foreground and Background, Suspending a Job

bringing background jobs to, Foreground and Background

sending foreground jobs to background, Suspending a Job

formatted output, printf (see printf command)

Fox, Brian, The Bourne Again Shell

FSF (Free Software Foundation), The Bourne Again Shell, Obtaining bash

full pathname, Directories

FUNCNAME environment variable, Built-In Shell Variables

functions, The readline Startup File, Functions, Functions, Functions, Functions, Functions, Functions, Functions, Positional parameters in functions, Positional parameters in functions, Positional parameters in functions, Local Variables in Functions, Advanced Examples: pushd and popd, Advanced Examples: pushd and popd, Advanced Examples: pushd and popd, Advanced Examples: pushd and popd, Return, Return, Typed Variables, Typed Variables, Typed Variables, Typed Variables, Traps and Functions, Types of Global Customization, Potential Problems, Examples, The Bourne Shell, The Korn Shell, Loadable Built-Ins, Loadable Built-Ins

Bourne shell not supporting, The Bourne Shell

compared to scripts, Functions

declaring variables as function names, Typed Variables, Typed Variables

defined, listing, Functions

defining, Functions

deleting, Functions

displaying list of, Typed Variables, Typed Variables

examples in archive for, Examples

exit status of, specifying, Return

global, Types of Global Customization

global variables of, Positional parameters in functions

Korn support, The Korn Shell

loadable built-in functions, Loadable Built-Ins, Loadable Built-Ins

local variables in, Local Variables in Functions

local variables of, Positional parameters in functions

naming, Potential Problems

order of precedence for, Functions

popd function example, Advanced Examples: pushd and popd, Advanced Examples: pushd and popd

positional parameters in, Positional parameters in functions

pushd function example, Advanced Examples: pushd and popd, Advanced Examples: pushd and popd

readline editing interface, The readline Startup File

return values of, Return

traps and, Traps and Functions

G

g command, debugger, Commands, Commands

G command, vi, Moving Around in the History List, Moving Around in the History List

Garfinkel, Simson (Practical UNIX and Internet Security), Privileged Mode

getopt command, Bourne shell, The Bourne Shell

getopts command, getopts, Built-In Commands and Reserved Words

global customization, Types of Global Customization

global variables, Positional parameters in functions

globbing, Filenames, Wildcards, and Pathname Expansion, Options, Extended Pattern Matching, Built-In Shell Variables

disabling, Options

extended operators for, Extended Pattern Matching

ignoring files for, Built-In Shell Variables

GLOBIGNORE environment variable, Built-In Shell Variables

GNU Copyleft for bash, What's in the Archive

GNU project, The Bourne Again Shell

GNU tools for MS-DOS, DJGPP

graphical user interface (GUI), bash Basics

graphics utility example, Patterns and Pattern Matching, getopts, getopts, eval

greater than sign (>), I/O Redirection, I/O Redirectors

output redirection, I/O Redirection, I/O Redirectors

greater than sign (\\>), String comparisons, Integer Variables and Arithmetic, Integer Variables and Arithmetic, Integer Variables and Arithmetic, I/O Redirectors, I/O Redirectors, I/O Redirectors, I/O Redirectors, I/O Redirectors, File Descriptors

greater than operator, Integer Variables and Arithmetic

string comparison operator, String comparisons

\\>& (output redirection), I/O Redirectors, File Descriptors

\\>&- (output redirection), I/O Redirectors

\\>= (greater than or equal to operator), Integer Variables and Arithmetic

\\>\\> (bit-shift right operator), Integer Variables and Arithmetic

\\>\\> (output redirection), I/O Redirectors

\\>| (output redirection), I/O Redirectors, I/O Redirectors

grep command, Standard I/O, Command Substitution

GROUPS environment variable, Built-In Shell Variables

guest accounts, restricted shell for, Restricted Shell

GUI (graphical user interface), bash Basics

gunzip utility, Unpacking the Archive

H

h command, debugger, Commands

h command, vi, Simple Control Mode Commands, Simple Control Mode Commands, Moving Around in the History List

hangup (HUP) signal, Ignoring Signals, disown

hard limits, ulimit

hash command, Command hashing, Built-In Commands and Reserved Words

hash mark (#), Miscellaneous Commands, Positional Parameters, Syntax of String Operators, Patterns and Pattern Matching, Patterns and Pattern Matching, Length Operator, Advanced Examples: pushd and popd, Arrays, printf, Built-In Shell Variables

## (pattern-matching operator), Patterns and Pattern Matching

array element length operator, Arrays

comments, Syntax of String Operators

environment variable, Positional Parameters, Built-In Shell Variables

length operator, Length Operator

pattern matching operator, Patterns and Pattern Matching

pattern-matching operator, Advanced Examples: pushd and popd

prepend comment, Miscellaneous Commands

printf flag, printf

hash tables, shopt, Command hashing

hashall shell option, Command hashing

head utility, Syntax of String Operators

header files, for built-in functions, Loadable Built-Ins

help, Who Do I Turn to?, Loadable Built-Ins

for bash, Who Do I Turn to?

for built-in functions, Loadable Built-Ins

help command, Help, Help, Configuring and Building bash, The Bourne Shell, Built-In Commands and Reserved Words

here-documents, I/O Redirectors, Here-documents, Here-documents

hidden files, Filenames, Wildcards, and Pathname Expansion

histappend shell option, shopt

histchars environment variable, Built-In Shell Variables

HISTCMD environment variable, Editing mode variables, Editing mode variables, Built-In Shell Variables

HISTCONTROL environment variable, Editing mode variables, Editing mode variables, Built-In Shell Variables

HISTFILE environment variable, The History List, Editing mode variables, Built-In Shell Variables

HISTFILESIZE environment variable, Editing mode variables, Editing mode variables, Built-In Shell Variables

HISTIGNORE environment variable, Editing mode variables, Editing mode variables, Built-In Shell Variables

history command, Configuring and Building bash, Built-In Commands and Reserved Words

history of commands, Command-Line Editing, Enabling Command-Line Editing, The History List, Moving Around in the History List, Moving Around in the History List, Moving Around in the History List, The fc Command, The fc Command, History Expansion, shopt, shopt, Editing mode variables, Editing mode variables, Built-In Commands and Reserved Words

appending to, shopt

displaying, Built-In Commands and Reserved Words

emacs editing mode, Moving Around in the History List

expansion commands, History Expansion

fc command, Enabling Command-Line Editing, The fc Command, The fc Command

multiple-line commands in, shopt

size of, Editing mode variables

time stamp for, Editing mode variables

vi editing mode, Moving Around in the History List, Moving Around in the History List

HISTSIZE environment variable, Editing mode variables, Editing mode variables, Built-In Shell Variables

HISTTIMEFORMAT environment variable, Editing mode variables, Editing mode variables, Built-In Shell Variables

home directory, The working directory, Tilde notation, Miscellaneous variables

HOME environment variable, Miscellaneous variables, Environment Variables, Built-In Shell Variables

horizontal-scroll-mode variable, readline, readline variables

HOSTFILE environment variable, Built-In Shell Variables

hostname completion, emacs editing mode, Textual Completion

HOSTNAME environment variable, Built-In Shell Variables

HOSTTYPE environment variable, Built-In Shell Variables

HUP (hangup) signal, Ignoring Signals, disown

hyphen (-), Commands, Arguments, and Options, Moving Around in the History List, Moving Around in the History List, Miscellaneous Commands, Integer Variables and Arithmetic, Integer Variables and Arithmetic, printf, Built-In Shell Variables

-- (decrement operator), Integer Variables and Arithmetic

append word, vi, Miscellaneous Commands

environment variable, Built-In Shell Variables

preceding options, Commands, Arguments, and Options

printf flag, printf

subtraction operator, Integer Variables and Arithmetic

vi command, Moving Around in the History List, Moving Around in the History List

I

i command, vi, Entering and Changing Text

I command, vi, Entering and Changing Text

I/O, Input and Output, Pipelines, Background I/O, String I/O, Reading user input

background I/O, Background I/O

for strings, String I/O, Reading user input

I/O redirection, Standard I/O, I/O Redirection, I/O Redirection, Options, I/O Redirectors, File Descriptors, I/O redirection and multiple commands, exec, Restricted Shell, The Bourne Shell, pdksh, I/O Redirection

Bourne shell support, The Bourne Shell

exec command with, exec

files overwritten with, not allowing, Options

in restricted shell, Restricted Shell

list of redirectors, I/O Redirection

multiple commands and, I/O redirection and multiple commands

pdksh support, pdksh

I/O-intensive processes, Advantages and Disadvantages of Coroutines

IEEE POSIX 1003.2 shell, Related Shells, The IEEE 1003.2 POSIX Shell Standard, The IEEE 1003.2 POSIX Shell Standard

if statement, if/else, if/else

IFS environment variable, Positional Parameters, Quoting with $@ and $*, for, Built-In Shell Variables

ignoredups option, Editing mode variables

IGNOREEOF environment variable, Built-In Shell Variables

ignoreeof shell option, Options

indices of array elements, Arrays

indirect expansion, eval

infinite loops, guarding against, ulimit

infinite recursion, Exit Status

input, Standard I/O, File Descriptors, Reading user input, Command-Line Options

from user, reading, Reading user input

standard, Standard I/O, File Descriptors, Command-Line Options

input files, as command-line arguments, Starting Up

input mode, vi editing mode, vi Editing Mode, Entering and Changing Text

input redirection, I/O Redirection (see I/O redirection)

input-meta variable, readline, readline variables

.inputrc file, The readline Startup File, readline variables

INPUTRC environment variable, The readline Startup File, Built-In Shell Variables

INT (interrupt) signal, Control-Key Signals, trap

integer comparisons, Integer Conditionals

integer variables, Arithmetic Variables and Assignment (see arithmetic variables)

interactive processes, Advantages and Disadvantages of Coroutines

interactive use of bash, Interactive Shell Use

internal field separator (IFS), Positional Parameters, Quoting with $@ and $*

interprocess communication (IPC), Signals

interrupt (INT) signal, Control-Key Signals

interrupt key, Control Keys

IPC (interprocess communication), Signals

iteration, for

J

j command, vi, Moving Around in the History List, Moving Around in the History List

job control, Features of bash, Background Jobs, Background Jobs and Priorities, Background Jobs, Background Jobs and Priorities, Job Control, Suspending a Job, Foreground and Background, Foreground and Background, Suspending a Job, Suspending a Job, Suspending a Job, Configuring and Building bash, The Bourne Shell

Bourne shell support, The Bourne Shell

bringing background job to foreground, Foreground and Background

configuring, Configuring and Building bash

foreground jobs, Background Jobs

listing running jobs, Foreground and Background

priority of jobs, Background Jobs and Priorities

resuming suspended jobs, Suspending a Job

sending foreground jobs to background, Suspending a Job

suspending jobs, Suspending a Job

job number, Process IDs and Job Numbers

jobs command, Background Jobs, Foreground and Background, Foreground and Background, Foreground and Background, Foreground and Background, Foreground and Background, Foreground and Background, Foreground and Background, kill, kill, Configuring and Building bash, The Bourne Shell, Built-In Commands and Reserved Words

-l option, Foreground and Background

-n option, Foreground and Background

-p option, Foreground and Background, kill, kill

-r option, Foreground and Background

-s option, Foreground and Background

-x option, Foreground and Background

Bourne shell not supporting, The Bourne Shell

Joy, Bill, History of UNIX Shells

K

k command, vi, Moving Around in the History List, Moving Around in the History List, Moving Around in the History List

key bindings, readline, The readline Startup File, Key Bindings Using bind

keymap variable, readline, readline variables

keywords, processing on command line, Command-Line Processing

kill command, Signals, kill, trap, Built-In Commands and Reserved Words

KILL signal, Control-Key Signals

killalljobs example, kill

Korn cd example, case

Korn shell, Preface (see ksh)

ksh (Korn shell), Preface, History of UNIX Shells, The Korn Shell, pdksh

compared to bash, The Korn Shell

public domain version of (pdksh), pdksh

L

l command, vi, Simple Control Mode Commands, Moving Around in the History List

LANG environment variable, Built-In Shell Variables

LC_ALL environment variable, Built-In Shell Variables

LC_COLLATE environment variable, Built-In Shell Variables

LC_CTYPE environment variable, Built-In Shell Variables

LC_MESSAGES environment variable, Built-In Shell Variables

LC_NUMERIC environment variable, Built-In Shell Variables

Learning the UNIX Operating System (Peek, Todino, Strang), Intended Audience

length operator, Length Operator

less than sign (<), I/O Redirection, String comparisons, Integer Variables and Arithmetic, Integer Variables and Arithmetic, Integer Variables and Arithmetic, I/O Redirectors, I/O Redirectors, I/O Redirectors, I/O Redirectors, I/O Redirectors, Here-documents, Here-documents

<& (input redirection), I/O Redirectors

<&- (input redirection), I/O Redirectors

<< (bit-shift left operator), Integer Variables and Arithmetic

<< (here-document), I/O Redirectors, Here-documents, Here-documents

<= (less than or equal to operator), Integer Variables and Arithmetic

<\\> (input/output redirection), I/O Redirectors

input redirection, I/O Redirectors

less than operator, Integer Variables and Arithmetic

redirecting input, I/O Redirection

string comparison operator, String comparisons

let command, Arithmetic Variables and Assignment, Built-In Commands and Reserved Words

line continuation character, Continuing Lines, Reading user input

LINENO environment variable, Set Options, The Preamble, Built-In Shell Variables

LINES environment variable, Environment Variables, Other common variables

lists, in for statement, for

lithist shell option, shopt

loadable built-in functions, Loadable Built-Ins, Loadable Built-Ins

local command, Local Variables in Functions, The Bourne Shell, Built-In Commands and Reserved Words

local statement, Local Variables in Functions

local variables, Positional parameters in functions, Local Variables in Functions, Typed Variables

logging in, files read during, The .bash_profile, .bash_logout, and .bashrc Files

logging out, The .bash_profile, .bash_logout, and .bashrc Files, Options

CTRL-D for, disabling, Options

files executed during, The .bash_profile, .bash_logout, and .bashrc Files

logical operators, Combinations of Exit Statuses, File attribute checking, Integer Variables and Arithmetic, Integer Variables and Arithmetic

login directory, The working directory, The working directory

(see also home directory)

login shell, Getting bash, Command-Line Options, Installing bash as a Login Shell, Installing bash as a Login Shell

bash acting as, Command-Line Options

changing, Installing bash as a Login Shell

installing bash as, Getting bash, Installing bash as a Login Shell

logout command, Interactive Shell Use, Interactive Shell Use, Built-In Commands and Reserved Words

loop variable, for

looping construct, for, for, while and until, while and until, while and until, while and until, Arithmetic for Loops, Arrays, Arrays

arithmetic for statement, Arithmetic for Loops, Arrays, Arrays

for statement, for, for

until statement, while and until, while and until

while statement, while and until, while and until

ls by dates example, Command Substitution

ls command, Filenames, Wildcards, and Pathname Expansion, Filenames, Wildcards, and Pathname Expansion, Filenames, Wildcards, and Pathname Expansion, Filenames, Wildcards, and Pathname Expansion, Filenames, Wildcards, and Pathname Expansion, Aliases, for

-a option, Filenames, Wildcards, and Pathname Expansion, Filenames, Wildcards, and Pathname Expansion

-F option, Aliases

-l option, Filenames, Wildcards, and Pathname Expansion

-R option, for

ls example, File attribute checking

M

MACHTYPE environment variable, Built-In Shell Variables

macros, readline editing interface, The readline Startup File

mail, shopt, Mail variables, Mail variables

notification if already read, shopt

shell variables for, Mail variables, Mail variables

MAIL environment variable, Mail variables, Environment Variables, Built-In Shell Variables

mail example, Command Substitution

mail header lines, deleting, example, Here-documents, Here-documents

MAIL shell variable, Mail variables

MAILCHECK environment variable, Mail variables, Built-In Shell Variables

MAILPATH environment variable, Mail variables, Built-In Shell Variables

mailwarn shell option, shopt

make command, Configuring and Building bash

make install script, Configuring and Building bash

make script, Configuring and Building bash

make tests command, Testing bash

make utility example, eval

mark-directories variable, readline, readline variables

mark-modified-lines variable, readline, readline variables

memory, size limitations, ulimit

menus, select statement for, select

meta-flag variable, readline, readline variables

metacharacters, processing on command line, Command-Line Processing

MKS Toolkit (Mortice Kern Systems), MKS Toolkit

more command, Pipelines, Pipelines

MS-DOS, GNU tools for, DJGPP

multibyte character support, Configuring and Building bash

multiple copies example, Parallelization

multitasking, user-controlled, Process Handling

N

n command, vi, Moving Around in the History List, Moving Around in the History List

N command, vi, Moving Around in the History List

named pipes, Process Substitution

navigating directories, Changing working directories

ndu (disk space usage) example, Arithmetic Variables and Assignment, Arithmetic Variables and Assignment

negating wildcards, Filenames, Wildcards, and Pathname Expansion

nested subshells, Nested Subshells

NetPBM utility package, String comparisons, getopts, getopts, getopts, eval, eval, eval

pnmcat utility, eval

pnmmargin utility, getopts

pnmnlfilt utility, eval

pnmscale utility, getopts

pnmtext utility, eval

newsgroups for bash, Asking Questions

nice command, Background Jobs and Priorities

noclobber shell option, Options

noglob shell option, Options

nohup command, Ignoring Signals

nounset shell option, Options

nroff test formatter, Documentation

numbered parameter names, Positional Parameters (see positional parameters)

O

O command, vi, Simple Control Mode Commands

O'Reilly contact information, We'd Like to Hear from You

OLDPWD environment variable, Miscellaneous variables, Built-In Shell Variables

one-dimensional arrays, The Korn Shell

online help, Help

operators, String Operators, Extended Pattern Matching, String comparisons, File attribute checking, Integer Conditionals, Integer Variables and Arithmetic, Integer Variables and Arithmetic, Integer Variables and Arithmetic, Arithmetic Conditionals, Arithmetic Variables and Assignment

arithmetic operators, Integer Variables and Arithmetic

assignment, Arithmetic Variables and Assignment

for conditions, String comparisons, File attribute checking, Integer Conditionals, Arithmetic Conditionals

arithmetic operators, Integer Conditionals, Arithmetic Conditionals

file attribute operators, File attribute checking

string comparison operators, String comparisons

logical operators, Integer Variables and Arithmetic

relational operators, Integer Variables and Arithmetic

string operators, String Operators, Extended Pattern Matching

OPTARG environment variable, getopts, Built-In Shell Variables

OPTERR environment variable, Built-In Shell Variables

OPTIND environment variable, getopts, Built-In Shell Variables

options, Command-Line Options (see command-line options)

order of precedence, Functions, Functions, Functions, Functions, Integer Variables and Arithmetic, command, builtin, and enable, The IEEE 1003.2 POSIX Shell Standard

for aliases, Functions

for commands, Functions

for functions, Functions

for scripts, Functions

in arithmetic expressions, Integer Variables and Arithmetic

overriding, command, builtin, and enable

POSIX, The IEEE 1003.2 POSIX Shell Standard

orphan processes, BSD

OSTYPE environment variable, Built-In Shell Variables

output, Standard I/O, File Descriptors, eval

standard, Standard I/O, File Descriptors, eval

output files, as command-line options, Starting Up

output redirection, I/O Redirection (see I/O redirection)

output-meta variable, readline, readline variables

P

p command, vi, Deletion Commands

P command, vi, Deletion Commands

parallelization, Parallelization, Parallelization

parameters, Commands, Arguments, and Options (see arguments)

parameters, positional, Positional Parameters (see positional parameters)

parent directory, Changing working directories

parentheses (( )), Command Substitution, File attribute checking, Integer Variables and Arithmetic, Arithmetic Conditionals, Nested Subshells, Potential Problems, Configuring and Building bash

((...)) (arithmetic test), Arithmetic Conditionals, Potential Problems, Configuring and Building bash

command substitution, Command Substitution

grouping conditional operators, File attribute checking

in arithmetic expressions, Integer Variables and Arithmetic

nested subshells, Nested Subshells

PATH environment variable, Command search path, Environment Variables, Restricted Shell, Built-In Shell Variables

pathname expansion, Filenames, Wildcards, and Pathname Expansion

pathnames, Directories, Tilde notation, Tilde notation, Filenames, Wildcards, and Pathname Expansion, Command-Line Processing

expansion of, Command-Line Processing

tilde (~) notation, Tilde notation, Tilde notation

wildcards for, Filenames, Wildcards, and Pathname Expansion

pattern matching operators, Patterns and Pattern Matching, Patterns and Pattern Matching, Extended Pattern Matching, The Bourne Shell

Bourne shell support, The Bourne Shell

extended, Extended Pattern Matching

pbmtext utility, eval

PC platforms, shells for, Shell Clones and Unix-like Platforms

pdksh (Public Domain Korn shell), pdksh

Peek, Jerry (Learning the UNIX Operating System), Intended Audience

percent sign (%), History Expansion, Patterns and Pattern Matching, Patterns and Pattern Matching, Advanced Examples: pushd and popd, Integer Variables and Arithmetic, printf, Additional bash printf specifiers, Foreground and Background, Foreground and Background, Foreground and Background, Foreground and Background, Foreground and Background

%% (job most recently put in background), Foreground and Background

%% (pattern-matching operator), Patterns and Pattern Matching, Advanced Examples: pushd and popd

%+ (job most recently put in background), Foreground and Background

%- (job second-most recently put in background), Foreground and Background

%? (job containing string), Foreground and Background

job numbers, Foreground and Background

modulus operator, Integer Variables and Arithmetic

pattern-matching operator, Patterns and Pattern Matching

printf format specifiers, printf, Additional bash printf specifiers

word designator, History Expansion

permissions, Shell Scripts and Functions, umask, umask

default, umask

for scripts, Shell Scripts and Functions

PID (process ID), Process IDs and Job Numbers, ps, ps, Process ID Variables and Temporary Files

determining, ps

shell variable containing, Process ID Variables and Temporary Files

pipe character (^), Installing bash as the Standard Shell, The Bourne Shell

pipe character (|), I/O Redirectors, Command-Line Processing

pipelines, Standard I/O, Standard I/O, Pipelines, Command-Line Processing, Coroutines, Coroutines, Process Substitution

as coroutines, Coroutines

in command line processing, Command-Line Processing

named pipes, Process Substitution

system calls invoked by, Coroutines

PIPESTATUS environment variable, Built-In Shell Variables

plus sign (+), Moving Around in the History List, Extended Pattern Matching, Integer Variables and Arithmetic, Integer Variables and Arithmetic, printf, Set Options

++ (increment operatro), Integer Variables and Arithmetic

addition operator, Integer Variables and Arithmetic

extended pattern-matching operator, Extended Pattern Matching

printf flag, printf

vi command, Moving Around in the History List

xtrace output, Set Options

PNM (Portable Anymap) format, String comparisons, getopts

pnmcat utility, eval

pnmmargin utility, NetPBM, getopts

pnmnlfilt utility, NetPBM, eval

pnmscale utility, NetPBM, getopts

point, emacs editing mode, Basic Commands

popd command, Arithmetic Variables and Assignment, Arithmetic Variables and Assignment, Configuring and Building bash, The Bourne Shell, The Korn Shell, Built-In Commands and Reserved Words

+n option, Arithmetic Variables and Assignment

-N option, Arithmetic Variables and Assignment

Bourne shell not supporting, The Bourne Shell

Korn not supporting, The Korn Shell

popd function example, Advanced Examples: pushd and popd, Advanced Examples: pushd and popd, Arithmetic Variables and Assignment, Arithmetic Variables and Assignment

Portable Anymap (PNM) format, String comparisons, getopts

positional parameters, Positional Parameters, Positional parameters in functions, Positional parameters in functions, Command-Line Options, getopts, Command-Line Options, shift

assignments using, Command-Line Options, shift

command-line options and, Command-Line Options, getopts

in functions, Positional parameters in functions

POSIX regular expressions, Configuring and Building bash

POSIX shell, command, builtin, and enable, Related Shells, The IEEE 1003.2 POSIX Shell Standard, The IEEE 1003.2 POSIX Shell Standard

POSIX, bash using, POSIX Mode, Command-Line Options

POSIXLY_CORRECT environment variable, Built-In Shell Variables

pound sign, Control-Key Signals (see hash mark)

PPID environment variable, Built-In Shell Variables

Practical UNIX and Internet Security (Spafford, Garfinkel), Privileged Mode

precedence, Functions (see order of precedence)

print command, Korn, The Korn Shell

printer file filter example, Patterns and Pattern Matching

printf command, printf, Additional bash printf specifiers, printf, printf, Additional bash printf specifiers, The Bourne Shell

Bourne shell support, The Bourne Shell

flags for, printf

format specifiers for, printf, Additional bash printf specifiers

priority of jobs, Background Jobs and Priorities

privileged mode, Privileged Mode

procedures, Functions (see functions)

process ID (PID), Process IDs and Job Numbers, ps, Process ID Variables and Temporary Files

determining, ps

shell variable containing, Process ID Variables and Temporary Files

process substitution, Process Substitution, Configuring and Building bash

processes, ps, BSD, BSD, trap, Coroutines, Parallelization, Advantages and Disadvantages of Coroutines, Parallelization, Parallelization

(see also signals)

listing information about, ps, BSD

parallelization of, Parallelization, Parallelization

simultaneous (coroutines), Coroutines, Parallelization

system resources used by, Advantages and Disadvantages of Coroutines

zombies or orphans, BSD

profile, The .bash_profile, .bash_logout, and .bashrc Files, Environment Variables, The Environment File, Command-Line Options, Environment Customization, Types of Global Customization, Restricted Shell

customizing, Environment Customization, Types of Global Customization

environment file and, The Environment File

environment variables in, Environment Variables

ignoring, Command-Line Options

restricted, Restricted Shell

programmable completion, Configuring and Building bash, Programmable Completion, Programmable Completion

programming language, choosing, Don't Use bash

programming, shell, Basic Shell Programming (see scripts)

programs, Files (see executable files)

prompt string customizations, Prompt String Customizations

prompting shell variables, Prompting variables, Prompting variables

PROMPT_COMMAND environment variable, Built-In Shell Variables

ps command, ps, BSD, ps, BSD, BSD

-a option, ps

-ax option, BSD

-e option, BSD

PS1 environment variable, Prompting variables, Types of Global Customization, Configuring and Building bash, Built-In Shell Variables

PS2 environment variable, Prompting variables, Configuring and Building bash, Built-In Shell Variables

PS3 environment variable, Prompting variables, Configuring and Building bash, Built-In Shell Variables

PS4 environment variable, Prompting variables, Set Options, Configuring and Building bash, pdksh, Built-In Shell Variables

pushd command, Arithmetic Variables and Assignment, Arithmetic Variables and Assignment, Configuring and Building bash, The Bourne Shell, The Korn Shell, Built-In Commands and Reserved Words

+n option, Arithmetic Variables and Assignment

-N option, Arithmetic Variables and Assignment

Bourne shell not supporting, The Bourne Shell

Korn not supporting, The Korn Shell

pushd directory stack example, select

pushd function example, Advanced Examples: pushd and popd, Advanced Examples: pushd and popd, Exit Status, Arithmetic Variables and Assignment, Arithmetic Variables and Assignment

pwd command, Changing working directories, Built-In Commands and Reserved Words

PWD environment variable, Miscellaneous variables, Environment Variables, Built-In Shell Variables

Q

q command, debugger, Commands, Commands

question mark (?), Filenames, Wildcards, and Pathname Expansion, Filenames, Wildcards, and Pathname Expansion, Moving Around in the History List, Extended Pattern Matching, Exit Status, Commands, Built-In Shell Variables

debugger command, Commands

environment variable, Exit Status, Built-In Shell Variables

extended pattern-matching operator, Extended Pattern Matching

vi command, Moving Around in the History List

wildcard, Filenames, Wildcards, and Pathname Expansion, Filenames, Wildcards, and Pathname Expansion

QUIT signal, Control-Key Signals

quoting, Quoting, Continuing Lines, Aliases, Variables and Quoting, Quoting with $@ and $*, Quoting with $@ and $*, Quoting with $@ and $*, Command Substitution, Integer Variables and Arithmetic, Integer Variables and Arithmetic, Arithmetic Variables and Assignment, Quoting

$@ and $* strings, Quoting with $@ and $*

* (asterisk) environment variable, Quoting with $@ and $*

@ (at sign) environment variable, Quoting with $@ and $*

alias definition, Aliases

arithmetic expressions, Integer Variables and Arithmetic

command substitution, Command Substitution

command-line processing and, Quoting

guidelines for, Integer Variables and Arithmetic

in assignments, Arithmetic Variables and Assignment

RETURN key, Continuing Lines

shell variables and, Variables and Quoting

special characters, Quoting

R

R command, vi, Entering and Changing Text

Ramey, Chet, The Bourne Again Shell

RANDOM environment variable, EXIT, Built-In Shell Variables

range wildcard notation, Filenames, Wildcards, and Pathname Expansion

rbash command, Configuring and Building bash

read command, read, Reading user input, Reading lines from files, Reading lines from files, Reading user input, Reading user input, Reading user input, Reading user input, Reading user input, Reading user input, Reading user input, Reading user input, The Bourne Shell, Built-In Commands and Reserved Words

-a option, Reading user input

-e option, Reading user input

-p option, Reading user input

-r option, Reading user input

-s option, Reading user input

-t option, Reading user input

Bourne shell support, The Bourne Shell

continuation character for, Reading user input

in while loop, Reading lines from files

reading lines from files, Reading lines from files

reading user input, Reading user input

read-only variables, declaring, Typed Variables, Typed Variables

readline editing interface, readline, Key Bindings Using bind, The readline Startup File, readline variables, The readline Startup File, The readline Startup File, The readline Startup File, readline variables, Key Bindings Using bind, Configuring and Building bash, Configuring and Building bash

conditionals, The readline Startup File

editing and history capabilities, Configuring and Building bash

functions, The readline Startup File

key bindings, Key Bindings Using bind

macros, The readline Startup File

programmable completion and, Configuring and Building bash

startup file, The readline Startup File, readline variables

variables, readline variables

readline variable, Enabling Command-Line Editing

README file, bash archive, Documentation

readonly command, Typed Variables, Built-In Commands and Reserved Words

recursion, for

recursion, infinite, Exit Status

recursive aliases, Aliases, Command-Line Processing

regular files, Files

relational operators, Integer Variables and Arithmetic, Arithmetic Conditionals

relative pathname, The working directory

REPLY environment variable, read, The Preamble, Built-In Shell Variables

reserved words, list of, Built-In Commands and Reserved Words, Built-In Commands and Reserved Words

resources, Intended Audience (see books)

restricted shell, Command-Line Options, Restricted Shell, Restricted Shell, Configuring and Building bash

return command, Built-In Commands and Reserved Words

RETURN key, Continuing Lines, Control Keys, Miscellaneous Commands

CTRL-M equivalent for, Control Keys

quoting, Continuing Lines

RETURN signal, Fake Signals, RETURN

return statement, Return, The Bourne Shell

return values of functions, Return

Reverse Polish Notation (RPN), Command blocks, eval

root, Directories

RPN (Reverse Polish Notation), Command blocks, eval

S

s command, debugger, Commands, Stepping

scripts, Shell Scripts and Functions, Shell Scripts and Functions, Shell Scripts and Functions, Shell Scripts and Functions, Shell Scripts and Functions, Shell Scripts and Functions, Functions, Functions, Functions, Syntax of String Operators, Shell Scripting, Don't Use bash, Comments, Starting Up, Starting Up, Potential Problems, Potential Problems, Don't Use bash, Examples

comments in, Syntax of String Operators, Comments

examples in archive for, Examples

execute permission for, Shell Scripts and Functions

functions in, Functions, Functions

good practices for, Shell Scripting, Don't Use bash

options for, guidelines, Starting Up, Starting Up

order of precedence for, Functions

potential problems with, Potential Problems

running, Shell Scripts and Functions

running as background job, Shell Scripts and Functions

running in subshells, Shell Scripts and Functions

when not to use bash for, Don't Use bash

whitespace in, Potential Problems

SECOND environment variable, Miscellaneous variables

SECONDS environment variable, Built-In Shell Variables

security, Command search path, System Security Features, Privileged Mode, Restricted Shell, A System Break-In Scenario, A System Break-In Scenario, Privileged Mode, Privileged Mode

PATH variable and, Command search path

privileged mode, Privileged Mode

restricted shell, Restricted Shell

suid bit and, A System Break-In Scenario

system break-in scenario, A System Break-In Scenario

Trojan horses, Privileged Mode

sed command, Standard I/O

select statement, select, select, Configuring and Building bash, The Bourne Shell, The IEEE 1003.2 POSIX Shell Standard

Bourne shell not supporting, The Bourne Shell

POSIX support, The IEEE 1003.2 POSIX Shell Standard

selection sort example, Arrays, Arrays

semicolon (;), Character-Finding Commands, String comparisons, String comparisons

statement separator, String comparisons

vi command, Character-Finding Commands

set command, Enabling Command-Line Editing, Enabling Command-Line Editing, Options, Options, Options, Options, Options, Options, Options, Options, Options, Environment Variables, I/O Redirectors, Set Options, Set Options, Set Options, Set Options, Set Options, Set Options, Set Options, Set Options, DEBUG, RETURN, POSIX Mode, Command-Line Options, Restricted Shell, Privileged Mode, Privileged Mode, The Bourne Shell, pdksh, Invocation, Built-In Commands and Reserved Words, set Options

-k option, Environment Variables

-o and +o options, Options, Options

-r option, Restricted Shell

Bourne shell support, The Bourne Shell

debugging options for, Set Options, Set Options

displaying settings of, Options

emacs option, Enabling Command-Line Editing, Options

functrace option, DEBUG, RETURN

ignoreeof option, Options

noclobber option, Options, I/O Redirectors

noexec option, Set Options, Set Options

noglob option, Options

nounset option, Options

options for, list of, set Options

options for, setting on bash command line, Command-Line Options, Invocation

pdksh support, pdksh

posix option, POSIX Mode

privileged option, Privileged Mode, Privileged Mode

verbose option, Set Options, Set Options

vi option, Enabling Command-Line Editing, Options

xtrace option, Set Options, Set Options

set user ID (suid) bit, A System Break-In Scenario

set wildcard construct, Filenames, Wildcards, and Pathname Expansion

sh (Bourne shell), History of UNIX Shells, History of UNIX Shells, Installing bash as the Standard Shell, The Bourne Shell

compared to bash, The Bourne Shell

compatibility with bash, Installing bash as the Standard Shell

shared object compilation, Loadable Built-Ins

SHELL environment variable, Getting bash, Environment Variables, Other common variables, Restricted Shell, Built-In Shell Variables

shell execution directive, Potential Problems

shell programming, Basic Shell Programming (see scripts)

shell scripts, Shell Scripts and Functions (see scripts)

shell variables, Shell Variables, Variables and Quoting, Shell Variables, Shell Variables, Shell Variables, Shell Variables, Variables and Quoting, Built-In Variables, Miscellaneous variables, Editing mode variables, Editing mode variables, Mail variables, Mail variables, Prompting variables, Prompting variables, Environment Variables, Shell Variables, Positional Parameters, Positional parameters in functions, More on Variable Syntax, String Operators, Extended Pattern Matching, Command Substitution, Command Substitution, Typed Variables, Typed Variables, Typed Variables, Typed Variables, Typed Variables, Typed Variables, Typed Variables, Typed Variables, Typed Variables, Typed Variables, Typed Variables, Typed Variables, Typed Variables, Integer Variables and Arithmetic, Arithmetic Variables and Assignment, Arithmetic Variables and Assignment, read, Reading user input, eval, Process ID Variables and Temporary Files, Variables and Constants, Potential Problems, Potential Problems, The Bourne Shell, Built-In Shell Variables, Built-In Shell Variables

arithmetic, Arithmetic Variables and Assignment, Arithmetic Variables and Assignment

attributes of, Typed Variables, Typed Variables

braces syntax for, More on Variable Syntax

built-in, Built-In Variables, Miscellaneous variables

built-in, list of, Built-In Shell Variables, Built-In Shell Variables

checking value of, Shell Variables

command substitution in, Command Substitution, Command Substitution

containing process ID, Process ID Variables and Temporary Files

converting to environment variables, Environment Variables

declaring as arrays, Typed Variables, Typed Variables

declaring as function names, Typed Variables, Typed Variables

declaring as integers, Typed Variables, Typed Variables

defining, Shell Variables

deleting, Shell Variables

displaying list of, with values, Typed Variables

exporting to environment, Typed Variables, Typed Variables

for command-line editing, Editing mode variables, Editing mode variables

for mail, Mail variables, Mail variables

for prompting, Prompting variables, Prompting variables

in arithmetic expressions, Integer Variables and Arithmetic

naming, Variables and Constants, Potential Problems, Potential Problems

not supported by Bourne shell, The Bourne Shell

positional parameters, Positional Parameters, Positional parameters in functions

quoting, Variables and Quoting

read-only, Typed Variables, Typed Variables

reading values into, read, Reading user input

string operators for, String Operators, Extended Pattern Matching

using in commands, Shell Variables

value of, as name of another variable, eval

SHELLOPTS environment variable, Built-In Shell Variables

shells, Preface, Preface, Preface, Preface, Preface, Summary of bash Features, bash Basics, What Is a Shell?, History of UNIX Shells, History of UNIX Shells, History of UNIX Shells, History of UNIX Shells, Getting bash, Getting bash, Subshells, Nested Subshells, Installing bash as the Standard Shell, Installing bash as the Standard Shell, Command-Line Options, Command-Line Options, Restricted Shell, Configuring and Building bash, Installing bash as a Login Shell, Related Shells, The Bourne Shell, The IEEE 1003.2 POSIX Shell Standard, The IEEE 1003.2 POSIX Shell Standard, The Korn Shell, pdksh, zsh, Shell Clones and Unix-like Platforms

(see also bash)

Bourne (sh), History of UNIX Shells, Installing bash as the Standard Shell, The Bourne Shell

C shell (csh), Summary of bash Features, History of UNIX Shells

determining which shell is in use, Getting bash

history of, History of UNIX Shells

IEEE POSIX 1003.2, Related Shells, The IEEE 1003.2 POSIX Shell Standard, The IEEE 1003.2 POSIX Shell Standard

Korn (ksh), Preface, History of UNIX Shells, The Korn Shell

login shell, Getting bash, Command-Line Options, Installing bash as a Login Shell

on PC platforms, Shell Clones and Unix-like Platforms

Public Domain Korn (pdksh), pdksh

restricted, Command-Line Options, Restricted Shell, Configuring and Building bash

standard shell, Preface, Installing bash as the Standard Shell

subshells, Subshells, Nested Subshells

Tenex C (tcsh), Preface

zsh, zsh

shift command, shift, Options with Arguments, Built-In Commands and Reserved Words

SHLVL environment variable, Built-In Shell Variables

shopt command, shopt, RETURN, Command-Line Options, The Bourne Shell, shopt Options, shopt Options

Bourne shell support, The Bourne Shell

extdebug option, RETURN

options for, list of, shopt Options, shopt Options

options on bash command line for, Command-Line Options

show-all-if-ambiguous variable, readline, readline variables

signals, Signals, BSD, Signals, Control-Key Signals, kill, trap, Resetting Traps, Ignoring Signals, Fake Signals, RETURN, The IEEE 1003.2 POSIX Shell Standard

control-key signals, Control-Key Signals

fake, Fake Signals, RETURN

ignoring, Ignoring Signals

kill command, kill

listing, Signals

POSIX support, The IEEE 1003.2 POSIX Shell Standard

trapping, trap, Resetting Traps

single quotes ('), Quoting, Continuing Lines, Aliases, Command Substitution, Integer Variables and Arithmetic, Quoting

around special characters, Quoting

command line processing of, Quoting

enclosing RETURN, Continuing Lines

in alias definition, Aliases

when to use, Command Substitution, Integer Variables and Arithmetic

slash (/), Moving Around in the History List, Patterns and Pattern Matching, Patterns and Pattern Matching, Integer Variables and Arithmetic, Restricted Shell

// (pattern-matching and replacement operator), Patterns and Pattern Matching

division operator, Integer Variables and Arithmetic

in restricted shell, Restricted Shell

pattern-matching and replacement operator, Patterns and Pattern Matching

vi command, Moving Around in the History List

soft limits, ulimit

sort command, Standard I/O, Syntax of String Operators, Syntax of String Operators, Breakpoints

-n option, Syntax of String Operators

-r option, Syntax of String Operators

source command, The .bash_profile, .bash_logout, and .bashrc Files, Shell Scripts and Functions

Spafford, Gene (Practical UNIX and Internet Security), Privileged Mode

special characters, Special Characters and Quoting, Control Keys, Quoting, Backslash-Escaping, Control Keys

backslash-escaping, Backslash-Escaping

control keys, Control Keys

quoting, Quoting

Stallman, Richard, The Bourne Again Shell

standard error, Standard I/O, File Descriptors, File Descriptors, Reading user input

file descriptor for, File Descriptors

prompts sent to, Reading user input

saving to a file, File Descriptors

standard error and output file example, File Descriptors, eval

standard input, Standard I/O, File Descriptors, Command-Line Options

file descriptor for, File Descriptors

reading commands from, Command-Line Options

standard output, Standard I/O, File Descriptors, File Descriptors, eval

file descriptor for, File Descriptors

saving to a file, File Descriptors, eval

standard shell, Preface, Installing bash as the Standard Shell

statement separator, String comparisons

status, Exit Status (see exit status of commands)

stepping, in debugger, A bash Debugger, Commands, Stepping

Strang, John (Learning the UNIX Operating System), Intended Audience

string comparisons, String comparisons, String comparisons

string I/O, String I/O, Reading user input

string operators, String Operators, Extended Pattern Matching, Syntax of String Operators, Syntax of String Operators, Patterns and Pattern Matching, Patterns and Pattern Matching, Length Operator, Extended Pattern Matching, String comparisons

comparison, String comparisons

extended pattern matching operators, Extended Pattern Matching

length operator, Length Operator

pattern matching operators, Patterns and Pattern Matching, Patterns and Pattern Matching

substitution operators, Syntax of String Operators, Syntax of String Operators

stty command, Control Keys, Control-Key Signals

subprocesses, Customization and Subprocesses, The Environment File, Customization and Subprocesses

(see also background jobs)

environment settings known to, Customization and Subprocesses, The Environment File

subroutines, Functions (see functions)

subshells, Shell Scripts and Functions, Shell Scripts and Functions, Subshells, Nested Subshells, Subshell Inheritance, Nested Subshells

environment variables in, Shell Scripts and Functions

inheritance of, Subshell Inheritance

nested, Nested Subshells

scripts running in, Shell Scripts and Functions

substitution operators, Syntax of String Operators, Syntax of String Operators

substring expansion, Syntax of String Operators

suid (set user ID) bit, A System Break-In Scenario

suspend command, Built-In Commands and Reserved Words

switch statement, case

system administration, bash Administration, Installing bash as the Standard Shell, POSIX Mode, Command-Line Options, Environment Customization, Types of Global Customization, Types of Global Customization, Obtaining bash, Unpacking the Archive, Configuring and Building bash, Configuring and Building bash, Installing bash as a Login Shell

bash command options for, Command-Line Options

configuring and building bash, Configuring and Building bash, Configuring and Building bash

customizing environment, Environment Customization, Types of Global Customization

global customization, Types of Global Customization

installing bash as login shell, Installing bash as a Login Shell

installing bash as standard shell, Installing bash as the Standard Shell

obtaining bash, Obtaining bash

switching bash to POSIX mode, POSIX Mode

unpacking bash archive, Unpacking the Archive

system calls, pipelines invoking, Coroutines

System V, ps command, System V

T

t command, vi, Character-Finding Commands

T command, vi, Character-Finding Commands

TAB command, emacs, Textual Completion

tar utility, Unpacking the Archive

tcsh (Tenex C shell), Preface

tee command, File Descriptors

temporary files, Process ID Variables and Temporary Files

Tenex C shell, Preface (see tcsh)

TERM (terminate) signal, kill

TERM environment variable, Environment Variables, Environment Variables, Terminal types, Reading lines from files

terminal stop (TSTP) signal, Control-Key Signals

terminate (TERM) signal, kill

terminfo database, Terminal types

test command, Condition Tests, Built-In Commands and Reserved Words

test operators, list of, Test Operators, Test Operators

text files, Files (see regular files)

textual completion, Textual Completion, Textual Completion, Textual Completion, Configuring and Building bash, Programmable Completion, Programmable Completion

emacs editing mode, Textual Completion, Textual Completion

programmable, Configuring and Building bash

vi editing mode, Textual Completion

thrashing, Advantages and Disadvantages of Coroutines

tilde (~), Tilde notation, Textual Completion, Miscellaneous Commands, Integer Variables and Arithmetic, Command-Line Processing, The Bourne Shell

bitwise not operator, Integer Variables and Arithmetic

home directory, Command-Line Processing

in pathnames, Tilde notation, The Bourne Shell

invert case, vi, Miscellaneous Commands

username completion, Textual Completion

time command, Configuring and Building bash

time stamp for command history, Editing mode variables

TIMEFORMAT environment variable, Built-In Shell Variables

times command, Built-In Commands and Reserved Words

TMOUT environment variable, Types of Global Customization, Built-In Shell Variables

Todino, Grace (Learning the UNIX Operating System), Intended Audience

tokens, processing on command line, Command-Line Processing

tr command, Standard I/O

tracing, execution, Execution tracing

trap command, trap, Resetting Traps, Process ID Variables and Temporary Files, Ignoring Signals, Resetting Traps, Fake Signals, RETURN, EXIT, Built-In Commands and Reserved Words

- argument, Resetting Traps

debugging with, EXIT

fake signals and, Fake Signals, RETURN

ignoring signals using, Ignoring Signals

with exit command, Process ID Variables and Temporary Files

traps, Traps and Functions, Resetting Traps, Fake Signals

fake signals for, Fake Signals

functions and, Traps and Functions

resetting, Resetting Traps

tree, Directories

troff format, Documentation

Trojan horses, protecting against, Privileged Mode

true command, trap

TSTP (terminal stop) signal, Control-Key Signals

tty built-in, Loadable Built-Ins

type command, Command search path, Functions, Functions, Functions, Functions, Functions, Functions, The Bourne Shell, The Korn Shell, Built-In Commands and Reserved Words

-a option, Functions

-f option, Functions

-p option, Functions

-P option, Functions

-t option, Functions

Bourne shell not supporting, The Bourne Shell

Korn not supporting, The Korn Shell

typed variables, Typed Variables, Typed Variables

typeset command, Typed Variables, Built-In Commands and Reserved Words

U

u command, vi, Deletion Commands

UID environment variable, Built-In Shell Variables

ulimit command, ulimit, ulimit, The Bourne Shell, Built-In Commands and Reserved Words

umask command, umask, The Bourne Shell, Built-In Commands and Reserved Words

unalias command, Aliases, Built-In Commands and Reserved Words

UNIX shells, History of UNIX Shells (see shells)

unset command, Shell Variables, Functions, Arrays, Built-In Commands and Reserved Words

until statement, while and until, while and until

user input, reading, Reading user input

user interfaces, bash Basics

user-controlled multitasking, Process Handling

username completion, emacs editing mode, Textual Completion

UWIN package (AT&T), AT&T UWIN

V

variables, Options, shopt

in cd command, shopt

undefined, not allowing, Options

variables, environment, Shell Variables (see environment variables)

variables, shell, Shell Variables (see shell variables)

version of bash, determining, Miscellaneous variables, Command-Line Options

versions of bash, bash Versions, The Bourne Again Shell

vertical bar (|), Pipelines, Character-Finding Commands, Extended Pattern Matching, Combinations of Exit Statuses, File attribute checking, case, Integer Variables and Arithmetic, Integer Variables and Arithmetic, I/O Redirectors, Command-Line Processing

bitwise or operator, Integer Variables and Arithmetic

extended pattern matching, Extended Pattern Matching

in case statement, case

pipe, Pipelines, I/O Redirectors, Command-Line Processing

vi command, Character-Finding Commands

|| (logical or operator), Combinations of Exit Statuses, File attribute checking, Integer Variables and Arithmetic

vi editing mode, Command-Line Editing, Enabling Command-Line Editing, vi Editing Mode, Miscellaneous Commands, Simple Control Mode Commands, Entering and Changing Text, Deletion Commands, Deletion Commands, Moving Around in the History List, Moving Around in the History List, Character-Finding Commands, Textual Completion, Keyboard Habits, Options, vi Control Mode Commands

character-finding commands, Character-Finding Commands

commands conflicting with terminal interface control keys, Command-Line Editing

commands for, list of, vi Control Mode Commands

control mode commands, Simple Control Mode Commands

deletion commands, Deletion Commands, Deletion Commands

history list, Moving Around in the History List, Moving Around in the History List

input mode commands, Entering and Changing Text

selecting, Enabling Command-Line Editing, Options

textual completion, Textual Completion

when to use, Keyboard Habits

vi shell option, Options

visible-stats variable, readline, readline variables

VISUAL environment variable, Environment Variables

W

w command, vi, Simple Control Mode Commands, Simple Control Mode Commands

W command, vi, Simple Control Mode Commands, Simple Control Mode Commands

wait command, wait, Built-In Commands and Reserved Words

whence command, Getting bash, The Korn Shell

whereis command, Getting bash

which command, Getting bash

while statement, while and until, while and until, getopts, getopts, Reading lines from files

getopts command used with, getopts, getopts

with read command, Reading lines from files

whitespace in scripts, Potential Problems

who command, Command Substitution

wildcard expansion, Filenames, Wildcards, and Pathname Expansion

wildcards, Filenames, Wildcards, and Pathname Expansion, Brace Expansion, Aliases, Options

in aliases, Aliases

in filenames, Filenames, Wildcards, and Pathname Expansion, Brace Expansion

not expanding, Options

word designators, History Expansion

words, in command, What Is a Shell?

working directory, The working directory, The working directory, Changing working directories, Miscellaneous variables

X

x command, debugger, Commands

X command, vi, Deletion Commands

x command, vi, Deletion Commands, Deletion Commands

Y

y command, vi, Deletion Commands

Z

zero (0) printf flag, printf

zero (0) word designator, History Expansion

zombie processes, BSD

zsh shell, zsh

About the Author

Cameron Newham lives in Perth, Western Australia. After completing a Bachelor of Science majoring in information technology and geography at the University of Western Australia, Cameron joined Universal Defence Systems (later to become Australian Defence Industries) as a software engineer. He has been with ADI for six years, working on various aspects of command and control systems. In his spare time Cameron can be found surfing the Internet, ballroom dancing, or driving his sports car. He also has more than a passing interest in space science, 3D graphics, synthesiser music, and Depeche Mode.

Colophon

Our look is the result of reader comments, our own experimentation, and feedback from distribution channels. Distinctive covers complement our distinctive approach to technical topics, breathing personality and life into potentially dry subjects.

The animal on the cover of Learning the bash Shell, Third Edition, is a silver bass, one of the 400-500 species of sea bass. The silver bass, also known as the white perch, is found in freshwater bays and river mouths along the Atlantic coast of North America from Nova Scotia to South Carolina, and is most abundant in the Chesapeake region. Silver bass live in large schools and feed on small fishes and crustaceans. Although many bass never stray far from one place their whole lives, silver bass swim upstream to spawn, often becoming landlocked in the process. Like most bass, the s\ ilver bass is attracted to bright, shiny objects, and can be drawn quite close to swimmers and divers in this way.

Colleen Gorman was the production editor and copyeditor for Learning the bash Shell, Third Edition . MaryAnne Weeks Mayo, Lydia Onofrei, and Emily Quill provided quality control. Peter Ryan provided production assistance. Angela Howard wrote the index.

Edie Freedman designed the cover of this book. The cover image is a 19th-century engraving from the Dover Pictorial Archive. Karen Montgomery produced the cover layout with Adobe InDesign CS using Adobe's ITC Garamond font.

David Futato designed the interior layout. This book was converted by Judy Hoer to FrameMaker 5.5.6 with a format conversion tool created by Erik Ray, Jason McIntosh, Neil Walls, and Mike Sierra that uses Perl and XML technologies. The text font is Linotype Birka; the heading font is Adobe Myriad Condensed; and the code font is LucasFont's TheSans Mono Condensed. The illustrations that appear in the book were created by Chris Reilley and updated for the third edition by Robert Romano, Jessamyn Read, and Lesley Borash using Macromedia FreeHand MX and Adobe Photoshop CS. This colophon was written by Clairemarie Fisher O'Leary.

The online edition of this book was created by the Digital Books production group (John Chodacki, Ken Douglass, and Ellie Cutler) using a set of Frame-to-XML conversion and cleanup tools written and maintained by Erik Ray, Benn Salter, John Chodacki, Ellie Cutler, and Jeff Liggett.